• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ cpu_physical_memory_write函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中cpu_physical_memory_write函数的典型用法代码示例。如果您正苦于以下问题：C++ cpu_physical_memory_write函数的具体用法？C++ cpu_physical_memory_write怎么用？C++ cpu_physical_memory_write使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了cpu_physical_memory_write函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: spapr_finalize_fdt

static void spapr_finalize_fdt(sPAPREnvironment *spapr,
                               target_phys_addr_t fdt_addr,
                               target_phys_addr_t rtas_addr,
                               target_phys_addr_t rtas_size)
{
    int ret;
    void *fdt;

    fdt = qemu_malloc(FDT_MAX_SIZE);

    /* open out the base tree into a temp buffer for the final tweaks */
    _FDT((fdt_open_into(spapr->fdt_skel, fdt, FDT_MAX_SIZE)));

    ret = spapr_populate_vdevice(spapr->vio_bus, fdt);
    if (ret < 0) {
        fprintf(stderr, "couldn't setup vio devices in fdt\n");
        exit(1);
    }

    /* RTAS */
    ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size);
    if (ret < 0) {
        fprintf(stderr, "Couldn't set up RTAS device tree properties\n");
    }

    _FDT((fdt_pack(fdt)));

    cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));

    qemu_free(fdt);
}
开发者ID:awilliam，项目名称:qemu，代码行数:31，代码来源:spapr.c


示例2: labx_load_device_tree

static int labx_load_device_tree(hwaddr addr,
                                 uint32_t ramsize,
                                 hwaddr initrd_base,
                                 hwaddr initrd_size,
                                 const char *kernel_cmdline)
{
    int fdt_size;
    void *fdt;
    int r;

    fdt = get_device_tree(&fdt_size);

    if (!fdt) {
        return 0;
    }

    if (kernel_cmdline && strlen(kernel_cmdline)) {
        r = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
                                        kernel_cmdline);
        if (r < 0) {
            fprintf(stderr, "couldn't set /chosen/bootargs\n");
        }
    }
    cpu_physical_memory_write(addr, (void *)fdt, fdt_size);

    return fdt_size;
}
开发者ID:wgoossens，项目名称:mb-qemu-labx，代码行数:27，代码来源:labx_nios2_devicetree.c


示例3: snprintf

static void *bamboo_load_device_tree(target_phys_addr_t addr,
                                     uint32_t ramsize,
                                     target_phys_addr_t initrd_base,
                                     target_phys_addr_t initrd_size,
                                     const char *kernel_cmdline)
{
    void *fdt = NULL;
#ifdef HAVE_FDT
    uint32_t mem_reg_property[] = { 0, 0, ramsize };
    char *path;
    int fdt_size;
    int pathlen;
    int ret;

    pathlen = snprintf(NULL, 0, "%s/%s", bios_dir, BINARY_DEVICE_TREE_FILE) + 1;
    path = qemu_malloc(pathlen);

    snprintf(path, pathlen, "%s/%s", bios_dir, BINARY_DEVICE_TREE_FILE);

    fdt = load_device_tree(path, &fdt_size);
    free(path);
    if (fdt == NULL)
        goto out;

    /* Manipulate device tree in memory. */

    ret = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
                               sizeof(mem_reg_property));
    if (ret < 0)
        fprintf(stderr, "couldn't set /memory/reg\n");

    ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-start",
                                    initrd_base);
    if (ret < 0)
        fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");

    ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-end",
                                    (initrd_base + initrd_size));
    if (ret < 0)
        fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");

    ret = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
                                      kernel_cmdline);
    if (ret < 0)
        fprintf(stderr, "couldn't set /chosen/bootargs\n");

    if (kvm_enabled())
        kvmppc_fdt_update(fdt);

    cpu_physical_memory_write (addr, (void *)fdt, fdt_size);

out:
#endif

    return fdt;
}
开发者ID:astarasikov，项目名称:qemu，代码行数:56，代码来源:ppc440_bamboo.c


示例4: channel_store_d

static void channel_store_d(struct fs_dma_ctrl *ctrl, int c)
{
	hwaddr addr = channel_reg(ctrl, c, RW_SAVED_DATA);

	/* Encode and store. FIXME: handle endianness.  */
	D(printf("%s ch=%d addr=" TARGET_FMT_plx "\n", __func__, c, addr));
	cpu_physical_memory_write (addr,
				  (void *) &ctrl->channels[c].current_d, 
				  sizeof ctrl->channels[c].current_d);
}
开发者ID:BreakawayConsulting，项目名称:QEMU，代码行数:10，代码来源:etraxfs_dma.c


示例5: channel_store_d

static void channel_store_d(struct fs_dma_ctrl *ctrl, int c)
{
	target_phys_addr_t addr = channel_reg(ctrl, c, RW_SAVED_DATA);

	/* Load and decode. FIXME: handle endianness.  */
	D(printf("%s addr=%x\n", __func__, addr));
	cpu_physical_memory_write (addr,
				  (void *) &ctrl->channels[c].current_d, 
				  sizeof ctrl->channels[c].current_d);
}
开发者ID:tumf，项目名称:xen-3.3.1，代码行数:10，代码来源:etraxfs_dma.c


示例6: qemu_find_file

static void *bamboo_load_device_tree(target_phys_addr_t addr,
                                     uint32_t ramsize,
                                     target_phys_addr_t initrd_base,
                                     target_phys_addr_t initrd_size,
                                     const char *kernel_cmdline)
{
    void *fdt = NULL;
#ifdef HAVE_FDT
    uint32_t mem_reg_property[] = { 0, 0, ramsize };
    char *filename;
    int fdt_size;
    int ret;

    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
    if (!filename) {
        goto out;
    }
    fdt = load_device_tree(filename, &fdt_size);
    qemu_free(filename);
    if (fdt == NULL) {
        goto out;
    }

    /* Manipulate device tree in memory. */

    ret = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
                               sizeof(mem_reg_property));
    if (ret < 0)
        fprintf(stderr, "couldn't set /memory/reg\n");

    ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-start",
                                    initrd_base);
    if (ret < 0)
        fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");

    ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-end",
                                    (initrd_base + initrd_size));
    if (ret < 0)
        fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");

    ret = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
                                      kernel_cmdline);
    if (ret < 0)
        fprintf(stderr, "couldn't set /chosen/bootargs\n");

    if (kvm_enabled())
        kvmppc_fdt_update(fdt);

    cpu_physical_memory_write (addr, (void *)fdt, fdt_size);

out:
#endif

    return fdt;
}
开发者ID:davidgiven，项目名称:qemu-z80，代码行数:55，代码来源:ppc440_bamboo.c


示例7: channel_store_c

static void channel_store_c(struct fs_dma_ctrl *ctrl, int c)
{
	target_phys_addr_t addr = channel_reg(ctrl, c, RW_GROUP_DOWN);

	/* Encode and store. FIXME: handle endianness.  */
	D(printf("%s ch=%d addr=" TARGET_FMT_plx "\n", __func__, c, addr));
	D(dump_d(c, &ctrl->channels[c].current_d));
	cpu_physical_memory_write (addr,
				  (void *) &ctrl->channels[c].current_c,
				  sizeof ctrl->channels[c].current_c);
}
开发者ID:3a9LL，项目名称:panda，代码行数:11，代码来源:etraxfs_dma.c


示例8: sysparm_st

static inline int sysparm_st(target_ulong addr, target_ulong len,
                             const void *val, uint16_t vallen)
{
    hwaddr phys = ppc64_phys_to_real(addr);

    if (len < 2) {
        return RTAS_OUT_SYSPARM_PARAM_ERROR;
    }
    stw_be_phys(&address_space_memory, phys, vallen);
    cpu_physical_memory_write(phys + 2, val, MIN(len - 2, vallen));
    return RTAS_OUT_SUCCESS;
}
开发者ID:CRYP706URU，项目名称:pyrebox，代码行数:12，代码来源:spapr_rtas.c


示例9: xilinx_load_device_tree

static int xilinx_load_device_tree(hwaddr addr,
                                      uint32_t ramsize,
                                      hwaddr initrd_base,
                                      hwaddr initrd_size,
                                      const char *kernel_cmdline)
{
    char *path;
    int fdt_size;
    void *fdt = NULL;
    int r;
    const char *dtb_filename;

    dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb");
    if (dtb_filename) {
        fdt = load_device_tree(dtb_filename, &fdt_size);
        if (!fdt) {
            error_report("Error while loading device tree file '%s'",
                dtb_filename);
        }
    } else {
        /* Try the local "ppc.dtb" override.  */
        fdt = load_device_tree("ppc.dtb", &fdt_size);
        if (!fdt) {
            path = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
            if (path) {
                fdt = load_device_tree(path, &fdt_size);
                g_free(path);
            }
        }
    }
    if (!fdt) {
        return 0;
    }

    r = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
                              initrd_base);
    if (r < 0) {
        error_report("couldn't set /chosen/linux,initrd-start");
    }

    r = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
                              (initrd_base + initrd_size));
    if (r < 0) {
        error_report("couldn't set /chosen/linux,initrd-end");
    }

    r = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline);
    if (r < 0)
        fprintf(stderr, "couldn't set /chosen/bootargs\n");
    cpu_physical_memory_write(addr, fdt, fdt_size);
    return fdt_size;
}
开发者ID:Distrotech，项目名称:qemu，代码行数:52，代码来源:virtex_ml507.c


示例10: put_words

/* Put an array of words in to main memory */
static inline int put_words(OHCIState *ohci,
                            uint32_t addr, uint16_t *buf, int num)
{
    int i;

    addr += ohci->localmem_base;

    for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
        uint16_t tmp = cpu_to_le16(*buf);
        cpu_physical_memory_write(addr, &tmp, sizeof(tmp));
    }

    return 1;
}
开发者ID:MegabytePhreak，项目名称:qemu-mcf5307，代码行数:15，代码来源:usb-ohci.c


示例11: pdc_start_transfer

static int pdc_start_transfer(void *opaque,
                               target_phys_addr_t tx,
                               unsigned int *tx_len,
                               target_phys_addr_t rx,
                               unsigned int *rx_len,
                               int last_transfer)
{
    SPIState *s = opaque;
    unsigned int i;
    unsigned int tlen;


    DPRINTF("pdc: start transfer, last trans %d\n", last_transfer);
#if 1
    if (tx_len == NULL) {
        DPRINTF("ignore only read request\n");
        return -1;
    }
#endif
    tlen = *tx_len;

    if (rx_len != NULL) {
        tlen = *rx_len > tlen ? *rx_len : tlen;
    }
    /* suppose that transfer 8 bit,
       TODO: fix this, extract right value from csr
    */
    s->spi_control->set_chipselect(s->spi_control->opaque, 1);
    for (i = 0; i < tlen; ++i) {
        DPRINTF("pdc: transfering\n");
        uint8_t tmp = 0;
        if (tx_len != NULL && *tx_len > 0) {
            cpu_physical_memory_read(tx, &tmp, 1);
            ++tx;
            --*tx_len;
        }
        tmp = s->spi_control->txrx_callback(s->spi_control->opaque, tmp, 8);
        s->rdr = tmp;
        if (rx_len != NULL && *rx_len > 0) {
            cpu_physical_memory_write(rx, &tmp, 1);
            ++rx;
            --*rx_len;
        }
    }

    if (last_transfer) {        
        s->spi_control->set_chipselect(s->spi_control->opaque, 0);
    }
    return 0;
}
开发者ID:sun12jun，项目名称:QEMU_porting，代码行数:50，代码来源:at91_spi.c


示例12: petalogix_load_device_tree

static int petalogix_load_device_tree(target_phys_addr_t addr,
                                      uint32_t ramsize,
                                      target_phys_addr_t initrd_base,
                                      target_phys_addr_t initrd_size,
                                      const char *kernel_cmdline)
{
#ifdef HAVE_FDT
    void *fdt;
    int r;
#endif
    char *path;
    int fdt_size;

#ifdef HAVE_FDT
    /* Try the local "mb.dtb" override.  */
    fdt = load_device_tree("mb.dtb", &fdt_size);
    if (!fdt) {
        path = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
        if (path) {
            fdt = load_device_tree(path, &fdt_size);
            qemu_free(path);
        }
        if (!fdt)
            return 0;
    }

    r = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline);
    if (r < 0)
        fprintf(stderr, "couldn't set /chosen/bootargs\n");
    cpu_physical_memory_write (addr, (void *)fdt, fdt_size);
#else
    /* We lack libfdt so we cannot manipulate the fdt. Just pass on the blob
       to the kernel.  */
    fdt_size = load_image_targphys("mb.dtb", addr, 0x10000);
    if (fdt_size < 0) {
        path = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
        if (path) {
            fdt_size = load_image_targphys(path, addr, 0x10000);
	    qemu_free(path);
        }
    }

    if (kernel_cmdline) {
        fprintf(stderr,
                "Warning: missing libfdt, cannot pass cmdline to kernel!\n");
    }
#endif
    return fdt_size;
}
开发者ID:ESOS-Lab，项目名称:VSSIM，代码行数:49，代码来源:petalogix_s3adsp1800_mmu.c


示例13: bcm2708_vc_fb

static void bcm2708_vc_fb(struct bcm2708_vc *_vc,
		int _chan, uint32_t _msg)
{
	target_phys_addr_t dma = _msg &~ (0xc << 28);
	cpu_physical_memory_read(dma, &_vc->fb, sizeof(_vc->fb));

	// TODO: much better calculations.

	int pitch;
	switch(_vc->fb.bpp)
	{
	case 8:
		pitch = _vc->fb.xres;
		_vc->fb_bpp = BPP_8;
		break;
	
	case 16:
		pitch = _vc->fb.xres << 1;
		_vc->fb_bpp = BPP_16_565;
		break;

	case 32:
		pitch = _vc->fb.xres << 2;
		_vc->fb_bpp = BPP_32;
		break;

	default:
		pitch = _vc->fb.xres << 1;
		_vc->fb_bpp = BPP_16_565;
		break;
	}

	target_phys_addr_t fbsz = pitch*_vc->fb.yres;
	target_phys_addr_t addr = 128*1024*1024; // Currently hard-coded in kernel?

	_vc->fb_invalidate = 1;
	_vc->fb.pitch = pitch;
	_vc->fb.base = addr;
	_vc->fb.screen_size = fbsz;

	qemu_console_resize(_vc->disp, _vc->fb.xres, _vc->fb.yres);

#ifdef DEBUG_FB
	printf("fb mapped to 0x%08x (%p).\n", addr, _vc->disp);
#endif
	
	cpu_physical_memory_write(dma, &_vc->fb, sizeof(_vc->fb));
	bcm2708_vc_send(_vc, _chan, 0);
}
开发者ID:ricky26，项目名称:QEMU，代码行数:49，代码来源:bcm2708_vc.c


示例14: nand_dev_write

/* I/O write */
static void nand_dev_write(void *opaque, target_phys_addr_t offset, uint32_t value)
{
    nand_dev_controller_state *s = (nand_dev_controller_state *)opaque;

    switch (offset) {
    case NAND_DEV:
        s->dev = value;
        if(s->dev >= nand_dev_count) {
            cpu_abort(cpu_single_env, "nand_dev_write: Bad dev %x\n", value);
        }
        break;
    case NAND_ADDR_HIGH:
        s->addr_high = value;
        break;
    case NAND_ADDR_LOW:
        s->addr_low = value;
        break;
    case NAND_BATCH_ADDR_LOW:
        s->batch_addr_low = value;
        break;
    case NAND_BATCH_ADDR_HIGH:
        s->batch_addr_high = value;
        break;
    case NAND_TRANSFER_SIZE:
        s->transfer_size = value;
        break;
    case NAND_DATA:
        s->data = value;
        break;
    case NAND_COMMAND:
        s->result = nand_dev_do_cmd(s, value);
        if (value == NAND_CMD_WRITE_BATCH || value == NAND_CMD_READ_BATCH ||
            value == NAND_CMD_ERASE_BATCH) {
            struct batch_data bd;
            uint64_t bd_addr = ((uint64_t)s->batch_addr_high << 32) | s->batch_addr_low;
            bd.result = s->result;
            cpu_physical_memory_write(bd_addr, (void*)&bd, sizeof(struct batch_data));
        }
        break;
    default:
        cpu_abort(cpu_single_env, "nand_dev_write: Bad offset %x\n", offset);
        break;
    }
}
开发者ID:0-14N，项目名称:NDroid，代码行数:45，代码来源:goldfish_nand.c


示例15: goldfish_audio_buff_recv

static int
goldfish_audio_buff_recv( struct goldfish_audio_buff*  b, int  avail, struct goldfish_audio_state*  s )
{
    int     missing = b->length - b->offset;
    int     avail2 = (avail > missing) ? missing : avail;
    int     read;

    read = AUD_read(s->voicein, b->data + b->offset, avail2 );
    if (read == 0)
        return 0;

    if (avail2 > 0)
        D("%s: AUD_read(%d) returned %d", __FUNCTION__, avail2, read);

    cpu_physical_memory_write( b->address + b->offset, b->data, read );
    b->offset += read;

    return read;
}
开发者ID:0-14N，项目名称:NDroid，代码行数:19，代码来源:goldfish_audio.c


示例16: goldfish_mmc_bdrv_read

static int  goldfish_mmc_bdrv_read(struct goldfish_mmc_state *s,
                                   int64_t                    sector_number,
                                   target_phys_addr_t         dst_address,
                                   int                        num_sectors)
{
    int  ret;

    while (num_sectors > 0) {
        ret = bdrv_read(s->bs, sector_number, s->buf, 1);
        if (ret < 0)
            return ret;

        cpu_physical_memory_write(dst_address, s->buf, 512);
        dst_address   += 512;
        num_sectors   -= 1;
        sector_number += 1;
    }
    return 0;
}
开发者ID:qtekfun，项目名称:htcDesire820Kernel，代码行数:19，代码来源:goldfish_mmc.c


示例17: s390_store_status

int s390_store_status(S390CPU *cpu, hwaddr addr, bool store_arch)
{
    static const uint8_t ar_id = 1;
    struct sigp_save_area *sa;
    hwaddr len = sizeof(*sa);
    int i;

    sa = cpu_physical_memory_map(addr, &len, 1);
    if (!sa) {
        return -EFAULT;
    }
    if (len != sizeof(*sa)) {
        cpu_physical_memory_unmap(sa, len, 1, 0);
        return -EFAULT;
    }

    if (store_arch) {
        cpu_physical_memory_write(offsetof(LowCore, ar_access_id), &ar_id, 1);
    }
    for (i = 0; i < 16; ++i) {
        sa->fprs[i] = cpu_to_be64(get_freg(&cpu->env, i)->ll);
    }
    for (i = 0; i < 16; ++i) {
        sa->grs[i] = cpu_to_be64(cpu->env.regs[i]);
    }
    sa->psw.addr = cpu_to_be64(cpu->env.psw.addr);
    sa->psw.mask = cpu_to_be64(get_psw_mask(&cpu->env));
    sa->prefix = cpu_to_be32(cpu->env.psa);
    sa->fpc = cpu_to_be32(cpu->env.fpc);
    sa->todpr = cpu_to_be32(cpu->env.todpr);
    sa->cputm = cpu_to_be64(cpu->env.cputm);
    sa->ckc = cpu_to_be64(cpu->env.ckc >> 8);
    for (i = 0; i < 16; ++i) {
        sa->ars[i] = cpu_to_be32(cpu->env.aregs[i]);
    }
    for (i = 0; i < 16; ++i) {
        sa->crs[i] = cpu_to_be64(cpu->env.cregs[i]);
    }

    cpu_physical_memory_unmap(sa, len, 1, len);

    return 0;
}
开发者ID:CTU-IIG，项目名称:qemu，代码行数:43，代码来源:helper.c


示例18: ac97_in_cb

static void ac97_in_cb(void *opaque, int avail_b)
{
    MilkymistAC97State *s = opaque;
    uint8_t buf[4096];
    uint32_t remaining = s->regs[R_U_REMAINING];
    int temp = audio_MIN(remaining, avail_b);
    uint32_t addr = s->regs[R_U_ADDR];
    int transferred = 0;

    trace_milkymist_ac97_in_cb(avail_b, remaining);

    /* prevent from raising an IRQ */
    if (temp == 0) {
        return;
    }

    while (temp) {
        int acquired, to_copy;

        to_copy = audio_MIN(temp, sizeof(buf));
        acquired = AUD_read(s->voice_in, buf, to_copy);
        if (!acquired) {
            break;
        }

        cpu_physical_memory_write(addr, buf, acquired);

        temp -= acquired;
        addr += acquired;
        transferred += acquired;
    }

    trace_milkymist_ac97_in_cb_transferred(transferred);

    s->regs[R_U_ADDR] = addr;
    s->regs[R_U_REMAINING] -= transferred;

    if ((s->regs[R_U_CTRL] & CTRL_EN) && (s->regs[R_U_REMAINING] == 0)) {
        trace_milkymist_ac97_pulse_irq_dmaw();
        qemu_irq_pulse(s->dmaw_irq);
    }
}
开发者ID:BananaSlug，项目名称:esesc，代码行数:42，代码来源:milkymist-ac97.c


示例19: load_hob

static int
load_hob(void *hob_buf, unsigned long dom_mem_size)
{
    int hob_size;

    hob_size = get_hob_size(hob_buf);
    if (hob_size < 0) {
        Hob_Output("Invalid hob data");
        return -1;
    }

    if (hob_size > GFW_HOB_SIZE) {
        Hob_Output("No enough memory for hob data");
        return -1;
    }

    cpu_physical_memory_write(GFW_HOB_START, hob_buf, hob_size);

    return 0;
}
开发者ID:AmesianX，项目名称:qemu-kvm，代码行数:20，代码来源:firmware.c


示例20: goldfish_mmc_bdrv_read

static int  goldfish_mmc_bdrv_read(struct goldfish_mmc_state *s,
                                   int64_t                    sector_number,
                                   hwaddr         dst_address,
                                   int                        num_sectors)
{
    int  ret;

	int printData = matchMeInPidTid(cpu_single_env);
    while (num_sectors > 0) {
        ret = bdrv_read(s->bs, sector_number, s->buf, 1);
        if (ret < 0)
            return ret;

        cpu_physical_memory_write(dst_address, s->buf, 512, printData, "goldfish_mmc_bdrv_Read");
        dst_address   += 512;
        num_sectors   -= 1;
        sector_number += 1;
    }
    return 0;
}
开发者ID:pras710，项目名称:qemu，代码行数:20，代码来源:mmc.c



注：本文中的cpu_physical_memory_write函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ cpu_pm_register_notifier函数代码示例发布时间：2022-05-30
下一篇：
C++ cpu_physical_memory_read函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap