• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ cpu_class_is_omap1函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中cpu_class_is_omap1函数的典型用法代码示例。如果您正苦于以下问题：C++ cpu_class_is_omap1函数的具体用法？C++ cpu_class_is_omap1怎么用？C++ cpu_class_is_omap1使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了cpu_class_is_omap1函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: omap1_pm_runtime_init

static int __init omap1_pm_runtime_init(void)
{
	const struct dev_pm_ops *pm;
	struct dev_pm_ops *omap_pm;

	if (!cpu_class_is_omap1())
		return -ENODEV;

	pm = platform_bus_get_pm_ops();
	if (!pm) {
		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
			__func__);
		return -ENODEV;
	}

	omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
	if (!omap_pm) {
		pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
			__func__);
		return -ENOMEM;
	}

	omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
	omap_pm->runtime_resume = omap1_pm_runtime_resume;

	platform_bus_set_pm_ops(omap_pm);

	return 0;
}
开发者ID:0709oNEY，项目名称:at100-kernel，代码行数:29，代码来源:pm_bus.c


示例2: omap_mcbsp_free

void omap_mcbsp_free(struct omap_mcbsp *mcbsp)
{
	void *reg_cache;

	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
		mcbsp->pdata->ops->free(mcbsp->id - 1);

	
	if (mcbsp->pdata->has_wakeup)
		MCBSP_WRITE(mcbsp, WAKEUPEN, 0);

	if (mcbsp->rx_irq)
		free_irq(mcbsp->rx_irq, (void *)mcbsp);
	free_irq(mcbsp->tx_irq, (void *)mcbsp);

	reg_cache = mcbsp->reg_cache;

	if (!cpu_class_is_omap1())
		omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC);

	spin_lock(&mcbsp->lock);
	if (mcbsp->free)
		dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
	else
		mcbsp->free = true;
	mcbsp->reg_cache = NULL;
	spin_unlock(&mcbsp->lock);

	if (reg_cache)
		kfree(reg_cache);
}
开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:31，代码来源:mcbsp.c


示例3: omap1_mcbsp_init

static int __init omap1_mcbsp_init(void)
{
	if (!cpu_class_is_omap1())
		return -ENODEV;

	if (cpu_is_omap7xx())
		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
					OMAP7XX_MCBSP_RES_SZ,
					omap7xx_mcbsp_pdata,
					OMAP7XX_MCBSP_COUNT);

	if (cpu_is_omap15xx())
		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
					OMAP15XX_MCBSP_RES_SZ,
					omap15xx_mcbsp_pdata,
					OMAP15XX_MCBSP_COUNT);

	if (cpu_is_omap16xx())
		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_res_0,
					OMAP16XX_MCBSP_RES_SZ,
					omap16xx_mcbsp_pdata,
					OMAP16XX_MCBSP_COUNT);

	return 0;
}
开发者ID:0-T-0，项目名称:ps4-linux，代码行数:25，代码来源:mcbsp.c


示例4: omap_init_lcd_dma

static int __init omap_init_lcd_dma(void)
{
	int r;

	if (!cpu_class_is_omap1())
		return -ENODEV;

	if (cpu_is_omap16xx()) {
		u16 w;

		/* this would prevent OMAP sleep */
		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
		w &= ~(1 << 8);
		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
	}

	spin_lock_init(&lcd_dma.lock);

	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
			"LCD DMA", NULL);
	if (r != 0)
		printk(KERN_ERR "unable to request IRQ for LCD DMA "
			       "(error %d)\n", r);

	return r;
}
开发者ID:Jackeagle，项目名称:android_kernel_sony_c2305，代码行数:26，代码来源:lcd_dma.c


示例5: omap1_mcbsp_init

static int __init omap1_mcbsp_init(void)
{
	if (!cpu_class_is_omap1())
		return -ENODEV;

	if (cpu_is_omap7xx()) {
		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
	} else if (cpu_is_omap15xx()) {
		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
		omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16);
	} else if (cpu_is_omap16xx()) {
		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
		omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16);
	}

	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
								GFP_KERNEL);
	if (!mcbsp_ptr)
		return -ENOMEM;

	if (cpu_is_omap7xx())
		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
						OMAP7XX_MCBSP_PDATA_SZ);

	if (cpu_is_omap15xx())
		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
						OMAP15XX_MCBSP_PDATA_SZ);

	if (cpu_is_omap16xx())
		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_pdata,
						OMAP16XX_MCBSP_PDATA_SZ);

	return omap_mcbsp_init();
}
开发者ID:15-712，项目名称:linux-2.6，代码行数:35，代码来源:mcbsp.c


示例6: omap_cfg_reg

/*
 * Sets the Omap MUX and PULL_DWN registers based on the table
 */
int __init_or_module omap_cfg_reg(const unsigned long index)
{
	struct pin_config *reg;

	if (!cpu_class_is_omap1()) {
		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
				index);
		WARN_ON(1);
		return -EINVAL;
	}

	if (mux_cfg == NULL) {
		printk(KERN_ERR "Pin mux table not initialized\n");
		return -ENODEV;
	}

	if (index >= mux_cfg->size) {
		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
		       index, mux_cfg->size);
		dump_stack();
		return -ENODEV;
	}

	reg = (struct pin_config *)&mux_cfg->pins[index];

	if (!mux_cfg->cfg_reg)
		return -ENODEV;

	return mux_cfg->cfg_reg(reg);
}
开发者ID:kozmikkick，项目名称:eternityprj-kernel-endeavoru-128，代码行数:33，代码来源:mux.c


示例7: XLATE

/*
 * Intercept ioremap() requests for addresses in our fixed mapping regions.
 */
void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
{
#ifdef CONFIG_ARCH_OMAP1
	if (cpu_class_is_omap1()) {
		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
	}
	if (cpu_is_omap7xx()) {
		if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
			return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);

		if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
			return XLATE(p, OMAP7XX_DSPREG_BASE,
					OMAP7XX_DSPREG_START);
	}
	if (cpu_is_omap15xx()) {
		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
			return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);

		if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
			return XLATE(p, OMAP1510_DSPREG_BASE,
					OMAP1510_DSPREG_START);
	}
	if (cpu_is_omap16xx()) {
		if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
			return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);

		if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
			return XLATE(p, OMAP16XX_DSPREG_BASE,
					OMAP16XX_DSPREG_START);
	}
#endif
#ifdef CONFIG_ARCH_OMAP2
	if (cpu_is_omap24xx()) {
		if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
			return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
		if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
			return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
	}
	if (cpu_is_omap2420()) {
		if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
			return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
		if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
			return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
		if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
			return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
	}
	if (cpu_is_omap2430()) {
		if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
			return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
		if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
			return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
		if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
			return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
		if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
			return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
	}
#endif
#ifdef CONFIG_ARCH_OMAP3
<<<<<<< HEAD
开发者ID:Core2idiot，项目名称:Kernel-Samsung-3.0...-，代码行数:63，代码来源:io.c


示例8: omap_stop_dma

void omap_stop_dma(int lch)
{
	u32 l;
	
	/* Disable all interrupts on the channel */
	if (cpu_class_is_omap1())
		dma_write(0, CICR(lch));
	
	l = dma_read(CCR(lch));
	l &= ~OMAP_DMA_CCR_EN;
	dma_write(l, CCR(lch));
	
	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
		int next_lch, cur_lch = lch;
		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
		
		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
		do {
			/* The loop case: we've been here already */
			if (dma_chan_link_map[cur_lch])
				break;
			/* Mark the current channel */
			dma_chan_link_map[cur_lch] = 1;
			
			disable_lnk(cur_lch);
			
			next_lch = dma_chan[cur_lch].next_lch;
			cur_lch = next_lch;
		} while (next_lch != -1);
	}
	
	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
开发者ID:christinaa，项目名称:Daisy，代码行数:33，代码来源:dma.c


示例9: omap_i2c_add_bus

static int __init omap_i2c_add_bus(int bus_id)
{
	if (cpu_class_is_omap1())
		return omap1_i2c_add_bus(bus_id);
	else
		return omap2_i2c_add_bus(bus_id);
}
开发者ID:AllenDou，项目名称:linux，代码行数:7，代码来源:i2c.c


示例10: omap_init

static int __init omap_init(void)
{
	if (!cpu_class_is_omap1())
		return -ENODEV;

	return platform_device_register(&serial_device);
}
开发者ID:250bpm，项目名称:linux，代码行数:7，代码来源:serial.c


示例11: omap_clear_dma

/*
 * Clears any DMA state so the DMA engine is ready to restart with new buffers
 * through omap_start_dma(). Any buffers in flight are discarded.
 */
void omap_clear_dma(int lch)
{
	unsigned long flags;
	
	flags = splhigh();
	
	if (cpu_class_is_omap1()) {
		u32 l;
		
		l = dma_read(CCR(lch));
		l &= ~OMAP_DMA_CCR_EN;
		dma_write(l, CCR(lch));
		
		/* Clear pending interrupts */
		l = dma_read(CSR(lch));
	}
	
	if (cpu_class_is_omap2()) {
		int i;
		void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
		for (i = 0; i < 0x44; i += 4)
			__raw_writel(0, lch_base + i);
	}
	
	splx(flags);
}
开发者ID:christinaa，项目名称:Daisy，代码行数:30，代码来源:dma.c


示例12: omap_set_dma_dest_params

/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
							  unsigned long dest_start,
							  int dst_ei, int dst_fi)
{
	u32 l;
	
	if (cpu_class_is_omap1()) {
		l = dma_read(CSDP(lch));
		l &= ~(0x1f << 9);
		l |= dest_port << 9;
		dma_write(l, CSDP(lch));
	}
	
	l = dma_read(CCR(lch));
	l &= ~(0x03 << 14);
	l |= dest_amode << 14;
	dma_write(l, CCR(lch));
	
	if (cpu_class_is_omap1()) {
		dma_write(dest_start >> 16, CDSA_U(lch));
		dma_write(dest_start, CDSA_L(lch));
	}
	
	if (cpu_class_is_omap2())
		dma_write(dest_start, CDSA(lch));
	
	dma_write(dst_ei, CDEI(lch));
	dma_write(dst_fi, CDFI(lch));
}
开发者ID:christinaa，项目名称:Daisy，代码行数:30，代码来源:dma.c


示例13: omap_set_dma_src_params

/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
							 unsigned long src_start,
							 int src_ei, int src_fi)
{
	u32 l;
	
	if (cpu_class_is_omap1()) {
		u16 w;
		
		w = dma_read(CSDP(lch));
		w &= ~(0x1f << 2);
		w |= src_port << 2;
		dma_write(w, CSDP(lch));
	}
	
	l = dma_read(CCR(lch));
	l &= ~(0x03 << 12);
	l |= src_amode << 12;
	dma_write(l, CCR(lch));
	
	if (cpu_class_is_omap1()) {
		dma_write(src_start >> 16, CSSA_U(lch));
		dma_write((u16)src_start, CSSA_L(lch));
	}
	
	if (cpu_class_is_omap2())
		dma_write(src_start, CSSA(lch));
	
	dma_write(src_ei, CSEI(lch));
	dma_write(src_fi, CSFI(lch));
}
开发者ID:christinaa，项目名称:Daisy，代码行数:32，代码来源:dma.c


示例14: omap_writew

void omap_writew(u16 v, u32 pa)
{
	if (cpu_class_is_omap1())
		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
	else
		__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
}
开发者ID:Aircell，项目名称:asp-kernel，代码行数:7，代码来源:io.c


示例15: omap_set_dma_transfer_params

void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
								  int frame_count, int sync_mode,
								  int dma_trigger, int src_or_dst_synch)
{
	u32 l;
	
	l = dma_read(CSDP(lch));
	l &= ~0x03;
	l |= data_type;
	dma_write(l, CSDP(lch));
	
	if (cpu_class_is_omap1()) {
		u16 ccr;
		
		ccr = dma_read(CCR(lch));
		ccr &= ~(1 << 5);
		if (sync_mode == OMAP_DMA_SYNC_FRAME)
			ccr |= 1 << 5;
		dma_write(ccr, CCR(lch));
		
		ccr = dma_read(CCR2(lch));
		ccr &= ~(1 << 2);
		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
			ccr |= 1 << 2;
		dma_write(ccr, CCR2(lch));
	}
	
	if (cpu_class_is_omap2() && dma_trigger) {
		u32 val;
		
		val = dma_read(CCR(lch));
		
		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
		val &= ~((3 << 19) | 0x1f);
		val |= (dma_trigger & ~0x1f) << 14;
		val |= dma_trigger & 0x1f;
		
		if (sync_mode & OMAP_DMA_SYNC_FRAME)
			val |= 1 << 5;
		else
			val &= ~(1 << 5);
		
		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
			val |= 1 << 18;
		else
			val &= ~(1 << 18);
		
		if (src_or_dst_synch)
			val |= 1 << 24;		/* source synch */
		else
			val &= ~(1 << 24);	/* dest synch */
		
		dma_write(val, CCR(lch));
	}
	
	dma_write(elem_count, CEN(lch));
	dma_write(frame_count, CFN(lch));
}
开发者ID:christinaa，项目名称:Daisy，代码行数:58，代码来源:dma.c


示例16: omap1_pm_runtime_init

static int __init omap1_pm_runtime_init(void)
{
	if (!cpu_class_is_omap1())
		return -ENODEV;

	pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);

	return 0;
}
开发者ID:0x000000FF，项目名称:edison-linux，代码行数:9，代码来源:pm_bus.c


示例17: omap_register_i2c_bus

int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
			  struct i2c_board_info const *info,
			  unsigned len)
{
	int ports, err;
	struct platform_device *pdev;
	struct resource *res;
	resource_size_t base, irq;

	if (cpu_class_is_omap1())
		ports = 1;
	else if (cpu_is_omap24xx())
		ports = 2;
	else if (cpu_is_omap34xx())
		ports = 3;

	BUG_ON(bus_id < 1 || bus_id > ports);

	if (info) {
		err = i2c_register_board_info(bus_id, info, len);
		if (err)
			return err;
	}

	pdev = &omap_i2c_devices[bus_id - 1];
	*(u32 *)pdev->dev.platform_data = clkrate;

	if (bus_id == 1) {
		res = pdev->resource;
		if (cpu_class_is_omap1()) {
			base = OMAP1_I2C_BASE;
			irq = INT_I2C;
		} else {
			base = OMAP2_I2C_BASE1;
			irq = INT_24XX_I2C1_IRQ;
		}
		res[0].start = base;
		res[0].end = base + OMAP_I2C_SIZE;
		res[1].start = irq;
	}

	omap_i2c_mux_pins(bus_id - 1);
	return platform_device_register(pdev);
}
开发者ID:10x-Amin，项目名称:nAa-kernel，代码行数:44，代码来源:i2c.c


示例18: omap_set_dma_channel_mode

void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
	if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
		u32 l;
		
		l = dma_read(LCH_CTRL(lch));
		l &= ~0x7;
		l |= mode;
		dma_write(l, LCH_CTRL(lch));
	}
}
开发者ID:christinaa，项目名称:Daisy，代码行数:11，代码来源:dma.c


示例19: omap_plat_register_i2c_bus

/**
 * omap_plat_register_i2c_bus - register I2C bus with device descriptors
 * @bus_id: bus id counting from number 1
 * @clkrate: clock rate of the bus in kHz
 * @info: pointer into I2C device descriptor table or NULL
 * @len: number of descriptors in the table
 *
 * Returns 0 on success or an error code.
 */
int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
			  struct omap_i2c_bus_board_data *pdata,
			  struct i2c_board_info const *info,
			  unsigned len)
{
	int err;
	int nr_ports = 0;

	if (cpu_class_is_omap1())
		nr_ports = omap1_i2c_nr_ports();
	else if (cpu_class_is_omap2())
		nr_ports = omap2_i2c_nr_ports();

	BUG_ON(bus_id < 1 || bus_id > nr_ports);

	if (info) {
		err = i2c_register_board_info(bus_id, info, len);
		if (err)
			return err;
	}

	if (!omap_i2c_pdata[bus_id - 1].rate)
		omap_i2c_pdata[bus_id - 1].rate = clkrate;
	omap_i2c_pdata[bus_id - 1].rate &= ~OMAP_I2C_CMDLINE_SETUP;

	if (pdata != NULL && pdata->handle != NULL) {
		omap_i2c_pdata[bus_id - 1].handle = pdata->handle;
		omap_i2c_pdata[bus_id - 1].hwspinlock_lock
						= pdata->hwspinlock_lock;
		omap_i2c_pdata[bus_id - 1].hwspinlock_unlock
						= pdata->hwspinlock_unlock;
	}


	if (cpu_class_is_omap1())
		return omap1_i2c_add_bus(bus_id);
	else if (cpu_class_is_omap2())
		return omap2_i2c_add_bus(bus_id);

	return 0;
}
开发者ID:egonalter，项目名称:R-Link_kernel，代码行数:50，代码来源:i2c.c


示例20: omap_enable_channel_irq

static inline void omap_enable_channel_irq(int lch)
{
	u32 status;
	
	/* Clear CSR */
	if (cpu_class_is_omap1())
		status = dma_read(CSR(lch));
	else if (cpu_class_is_omap2())
		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
	
	/* Enable some nice interrupts. */
	dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
}
开发者ID:christinaa，项目名称:Daisy，代码行数:13，代码来源:dma.c



注：本文中的cpu_class_is_omap1函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ cpu_class_is_omap2函数代码示例发布时间：2022-05-30
下一篇：
C++ cpu_cause_interrupt函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap