C++ configure_usart0_pins函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中configure_usart0_pins函数的典型用法代码示例。如果您正苦于以下问题：C++ configure_usart0_pins函数的具体用法？C++ configure_usart0_pins怎么用？C++ configure_usart0_pins使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了configure_usart0_pins函数的6个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: at91_register_uart

void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
	struct platform_device *pdev;
	struct atmel_uart_data *pdata;

	switch (id) {
		case 0:		/* DBGU */
			pdev = &at91rm9200_dbgu_device;
			configure_dbgu_pins();
			break;
		case AT91RM9200_ID_US0:
			pdev = &at91rm9200_uart0_device;
			configure_usart0_pins(pins);
			break;
		case AT91RM9200_ID_US1:
			pdev = &at91rm9200_uart1_device;
			configure_usart1_pins(pins);
			break;
		case AT91RM9200_ID_US2:
			pdev = &at91rm9200_uart2_device;
			configure_usart2_pins(pins);
			break;
		case AT91RM9200_ID_US3:
			pdev = &at91rm9200_uart3_device;
			configure_usart3_pins(pins);
			break;
		default:
			return;
	}
	pdata = pdev->dev.platform_data;
	pdata->num = portnr;		/* update to mapped ID */

	if (portnr < ATMEL_MAX_UART)
		at91_uarts[portnr] = pdev;
}

开发者ID:hellolwq，项目名称:linux-2.6-Note，代码行数:35，代码来源:at91rm9200_devices.c

示例2: at91_register_uart

void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
	struct platform_device *pdev;

	switch (id) {
		case 0:		/* DBGU */
			pdev = &at91cap9_dbgu_device;
			configure_dbgu_pins();
			at91_clock_associate("mck", &pdev->dev, "usart");
			break;
		case AT91CAP9_ID_US0:
			pdev = &at91cap9_uart0_device;
			configure_usart0_pins(pins);
			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
			break;
		case AT91CAP9_ID_US1:
			pdev = &at91cap9_uart1_device;
			configure_usart1_pins(pins);
			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
			break;
		case AT91CAP9_ID_US2:
			pdev = &at91cap9_uart2_device;
			configure_usart2_pins(pins);
			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
			break;
		default:
			return;
	}
	pdev->id = portnr;		/* update to mapped ID */

	if (portnr < ATMEL_MAX_UART)
		at91_uarts[portnr] = pdev;
}

开发者ID:kozmikkick，项目名称:eternityprj-kernel-endeavoru-128，代码行数:33，代码来源:at91cap9_devices.c

示例3: at32_map_usart

void __init at32_map_usart(unsigned int hw_id, unsigned int line)
{
	struct platform_device *pdev;

	switch (hw_id) {
	case 0:
		pdev = &atmel_usart0_device;
		configure_usart0_pins();
		break;
	case 1:
		pdev = &atmel_usart1_device;
		configure_usart1_pins();
		break;
	case 2:
		pdev = &atmel_usart2_device;
		configure_usart2_pins();
		break;
	case 3:
		pdev = &atmel_usart3_device;
		configure_usart3_pins();
		break;
	default:
		return;
	}

	if (PXSEG(pdev->resource[0].start) == P4SEG) {
		/* Addresses in the P4 segment are permanently mapped 1:1 */
		struct atmel_uart_data *data = pdev->dev.platform_data;
		data->regs = (void __iomem *)pdev->resource[0].start;
	}

	pdev->id = line;
	at32_usarts[line] = pdev;
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:34，代码来源:at32ap7000.c

示例4: at91_init_serial

void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
	int i;

	/* Fill in list of supported UARTs */
	for (i = 0; i < config->nr_tty; i++) {
		switch (config->tty_map[i]) {
			case 0:
				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
				at91_uarts[i] = &at91sam9260_uart0_device;
				at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
				break;
			case 1:
				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
				at91_uarts[i] = &at91sam9260_uart1_device;
				at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
				break;
			case 2:
				configure_usart2_pins(0);
				at91_uarts[i] = &at91sam9260_uart2_device;
				at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
				break;
			case 3:
				configure_usart3_pins(0);
				at91_uarts[i] = &at91sam9260_uart3_device;
				at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
				break;
			case 4:
				configure_usart4_pins();
				at91_uarts[i] = &at91sam9260_uart4_device;
				at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
				break;
			case 5:
				configure_usart5_pins();
				at91_uarts[i] = &at91sam9260_uart5_device;
				at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
				break;
			case 6:
				configure_dbgu_pins();
				at91_uarts[i] = &at91sam9260_dbgu_device;
				at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
				break;
			default:
				continue;
		}
		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
	}

	/* Set serial console device */
	if (config->console_tty < ATMEL_MAX_UART)
		atmel_default_console_device = at91_uarts[config->console_tty];
	if (!atmel_default_console_device)
		printk(KERN_INFO "AT91: No default serial console defined.\n");
}

开发者ID:xiaowei942，项目名称:kernel-11，代码行数:54，代码来源:at91sam9260_devices.c

示例5: at91_register_uart

struct device_d * __init at91_register_uart(unsigned id, unsigned pins)
{
	resource_size_t start;

	switch (id) {
		case 0:		/* DBGU */
			configure_dbgu_pins();
			start = AT91_BASE_SYS + AT91_DBGU;
			id = 0;
			break;
		case AT91SAM9260_ID_US0:
			configure_usart0_pins(pins);
			start = AT91SAM9260_BASE_US0;
			id = 1;
			break;
		case AT91SAM9260_ID_US1:
			configure_usart1_pins(pins);
			start = AT91SAM9260_BASE_US1;
			id = 2;
			break;
		case AT91SAM9260_ID_US2:
			configure_usart2_pins(pins);
			start = AT91SAM9260_BASE_US2;
			id = 3;
			break;
		case AT91SAM9260_ID_US3:
			configure_usart3_pins(pins);
			start = AT91SAM9260_BASE_US3;
			id = 4;
			break;
		case AT91SAM9260_ID_US4:
			configure_usart4_pins();
			start = AT91SAM9260_BASE_US4;
			id = 5;
			break;
		case AT91SAM9260_ID_US5:
			configure_usart5_pins();
			start = AT91SAM9260_BASE_US5;
			id = 6;
			break;
		default:
			return NULL;
	}

	return add_generic_device("atmel_usart", id, NULL, start, 4096,
			   IORESOURCE_MEM, NULL);
}

开发者ID:prpplague，项目名称:das_oszi_barebox，代码行数:47，代码来源:at91sam9260_devices.c

示例6: at91_register_uart

void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
	struct platform_device *pdev;

	switch (id) {
		case 0:		
			pdev = &at91sam9rl_dbgu_device;
			configure_dbgu_pins();
			at91_clock_associate("mck", &pdev->dev, "usart");
			break;
		case AT91SAM9RL_ID_US0:
			pdev = &at91sam9rl_uart0_device;
			configure_usart0_pins(pins);
			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
			break;
		case AT91SAM9RL_ID_US1:
			pdev = &at91sam9rl_uart1_device;
			configure_usart1_pins(pins);
			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
			break;
		case AT91SAM9RL_ID_US2:
			pdev = &at91sam9rl_uart2_device;
			configure_usart2_pins(pins);
			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
			break;
		case AT91SAM9RL_ID_US3:
			pdev = &at91sam9rl_uart3_device;
			configure_usart3_pins(pins);
			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
			break;
		default:
			return;
	}
	pdev->id = portnr;		

	if (portnr < ATMEL_MAX_UART)
		at91_uarts[portnr] = pdev;
}

开发者ID:leemgs，项目名称:OptimusOneKernel-KandroidCommunity，代码行数:38，代码来源:at91sam9rl_devices.c

注：本文中的configure_usart0_pins函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。