C++ complete_vfork_done函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中complete_vfork_done函数的典型用法代码示例。如果您正苦于以下问题：C++ complete_vfork_done函数的具体用法？C++ complete_vfork_done怎么用？C++ complete_vfork_done使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了complete_vfork_done函数的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mm_release

void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	
#ifdef CONFIG_FUTEX
	if (unlikely(tsk->robust_list)) {
		exit_robust_list(tsk);
		tsk->robust_list = NULL;
	}
#ifdef CONFIG_COMPAT
	if (unlikely(tsk->compat_robust_list)) {
		compat_exit_robust_list(tsk);
		tsk->compat_robust_list = NULL;
	}
#endif
	if (unlikely(!list_empty(&tsk->pi_state_list)))
		exit_pi_state_list(tsk);
#endif

	
	deactivate_mm(tsk, mm);

	if (tsk->vfork_done)
		complete_vfork_done(tsk);

	if (tsk->clear_child_tid) {
		if (!(tsk->flags & PF_SIGNALED) &&
		    atomic_read(&mm->mm_users) > 1) {
			put_user(0, tsk->clear_child_tid);
			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
					1, NULL, NULL, 0);
		}
		tsk->clear_child_tid = NULL;
	}
}

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:34，代码来源:fork.c

示例2: mm_release

/* Please note the differences between mmput and mm_release.
 * mmput is called whenever we stop holding onto a mm_struct,
 * error success whatever.
 *
 * mm_release is called after a mm_struct has been removed
 * from the current process.
 *
 * This difference is important for error handling, when we
 * only half set up a mm_struct for a new process and need to restore
 * the old one.  Because we mmput the new mm_struct before
 * restoring the old one. . .
 * Eric Biederman 10 January 1998
 */
void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	/* Get rid of any futexes when releasing the mm */
#ifdef CONFIG_FUTEX
	if (unlikely(tsk->robust_list)) {
		exit_robust_list(tsk);
		tsk->robust_list = NULL;
	}
#ifdef CONFIG_COMPAT
	if (unlikely(tsk->compat_robust_list)) {
		compat_exit_robust_list(tsk);
		tsk->compat_robust_list = NULL;
	}
#endif
	if (unlikely(!list_empty(&tsk->pi_state_list)))
		exit_pi_state_list(tsk);
#endif

	uprobe_free_utask(tsk);

	/* Get rid of any cached register state */
	deactivate_mm(tsk, mm);

	/*
	 * If we're exiting normally, clear a user-space tid field if
	 * requested.  We leave this alone when dying by signal, to leave
	 * the value intact in a core dump, and to save the unnecessary
	 * trouble, say, a killed vfork parent shouldn't touch this mm.
	 * Userland only wants this done for a sys_exit.
	 */
	if (tsk->clear_child_tid) {
		if (!(tsk->flags & PF_SIGNALED) &&
		    atomic_read(&mm->mm_users) > 1) {

			struct syscall_result* psr; /* REPLAY */
			if (current->record_thrd) new_syscall_enter_external (TID_WAKE_CALL);                                /* REPLAY */
			else if (current->replay_thrd) get_next_syscall_enter_external (TID_WAKE_CALL, NULL, &psr);          /* REPLAY */

			/*
			 * We don't check the error code - if userspace has
			 * not set up a proper pointer then tough luck.
			 */
			put_user(0, tsk->clear_child_tid);
			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
					1, NULL, NULL, 0);

			if (current->record_thrd) new_syscall_exit_external (TID_WAKE_CALL, 0, NULL);  /* REPLAY */
			else if (current->replay_thrd && psr) get_next_syscall_exit_external (psr);    /* REPLAY */
		}
		tsk->clear_child_tid = NULL;
	}

	/*
	 * All done, finally we can wake up parent and return this mm to him.
	 * Also kthread_stop() uses this completion for synchronization.
	 */
	if (tsk->vfork_done)
		complete_vfork_done(tsk);
}

开发者ID:andrewjylee，项目名称:omniplay，代码行数:72，代码来源:fork.c

示例3: mm_release

/* Please note the differences between mmput and mm_release.
 * mmput is called whenever we stop holding onto a mm_struct,
 * error success whatever.
 *
 * mm_release is called after a mm_struct has been removed
 * from the current process.
 *
 * This difference is important for error handling, when we
 * only half set up a mm_struct for a new process and need to restore
 * the old one.  Because we mmput the new mm_struct before
 * restoring the old one. . .
 * Eric Biederman 10 January 1998
 */
void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
	/* Get rid of any futexes when releasing the mm */
#ifdef CONFIG_FUTEX
	if (unlikely(tsk->robust_list)) {
		exit_robust_list(tsk);
		tsk->robust_list = NULL;
	}
#ifdef CONFIG_COMPAT
	if (unlikely(tsk->compat_robust_list)) {
		compat_exit_robust_list(tsk);
		tsk->compat_robust_list = NULL;
	}
#endif
	if (unlikely(!list_empty(&tsk->pi_state_list)))
		exit_pi_state_list(tsk);
#endif

	uprobe_free_utask(tsk);

	/* Get rid of any cached register state */
	deactivate_mm(tsk, mm);

	if (tsk->vfork_done)
		complete_vfork_done(tsk);

	/*
	 * If we're exiting normally, clear a user-space tid field if
	 * requested.  We leave this alone when dying by signal, to leave
	 * the value intact in a core dump, and to save the unnecessary
	 * trouble, say, a killed vfork parent shouldn't touch this mm.
	 * Userland only wants this done for a sys_exit.
	 */
	if (tsk->clear_child_tid) {
		if (!(tsk->flags & PF_SIGNALED) &&
		    atomic_read(&mm->mm_users) > 1) {
			/*
			 * We don't check the error code - if userspace has
			 * not set up a proper pointer then tough luck.
			 */
			put_user(0, tsk->clear_child_tid);
			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
					1, NULL, NULL, 0);
		}
		tsk->clear_child_tid = NULL;
	}
}

开发者ID:tcreech，项目名称:tilegx-linux-3.4.68-politestackrehome，代码行数:60，代码来源:fork.c

注：本文中的complete_vfork_done函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。