本文整理汇总了C++中common_start函数的典型用法代码示例。如果您正苦于以下问题：C++ common_start函数的具体用法？C++ common_start怎么用？C++ common_start使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了common_start函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: common_start
void nes_namcot163_device::device_start()
{
common_start();
irq_timer = timer_alloc(TIMER_IRQ);
irq_timer->adjust(attotime::zero, 0, machine().device<cpu_device>("maincpu")->cycles_to_attotime(1));
save_item(NAME(m_irq_enable));
save_item(NAME(m_irq_count));
save_item(NAME(m_wram_protect));
save_item(NAME(m_latch));
save_item(NAME(m_chr_bank));
save_item(NAME(m_n163_ram));
m_mapper_sram_size = 0x2000;
m_mapper_sram = m_n163_ram;
}
开发者ID:broftkd，项目名称:mame，代码行数:16，代码来源:namcot.cpp
示例2: common_start
void nes_konami_vrc4_device::device_start()
{
common_start();
irq_timer = timer_alloc(TIMER_IRQ);
irq_timer->adjust(attotime::zero, 0, machine().device<cpu_device>("maincpu")->cycles_to_attotime(1));
save_item(NAME(m_irq_mode));
save_item(NAME(m_irq_prescale));
save_item(NAME(m_irq_enable));
save_item(NAME(m_irq_enable_latch));
save_item(NAME(m_irq_count));
save_item(NAME(m_irq_count_latch));
save_item(NAME(m_latch));
save_item(NAME(m_mmc_prg_bank));
save_item(NAME(m_mmc_vrom_bank));
}
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:16，代码来源:nes_konami.c
示例3: common_start
void nes_namcot175_device::device_start()
{
common_start();
irq_timer = timer_alloc(TIMER_IRQ);
irq_timer->adjust(attotime::zero, 0, machine().device<cpu_device>("maincpu")->cycles_to_attotime(1));
save_item(NAME(m_irq_enable));
save_item(NAME(m_irq_count));
save_item(NAME(m_wram_protect));
m_n163_ram = auto_alloc_array_clear(machine(), UINT8, 0x2000);
save_pointer(NAME(m_n163_ram), 0x2000);
m_mapper_sram_size = 0x2000;
m_mapper_sram = m_n163_ram;
}
开发者ID:CJBass，项目名称:mame2013-libretro，代码行数:16，代码来源:nes_namcot.c
示例4: common_start
void nes_tengen032_device::device_start()
{
common_start();
irq_timer = timer_alloc(TIMER_IRQ);
irq_timer->reset();
timer_freq = machine().device<cpu_device>("maincpu")->cycles_to_attotime(4);
save_item(NAME(m_mmc_prg_bank));
save_item(NAME(m_mmc_vrom_bank));
save_item(NAME(m_latch));
save_item(NAME(m_irq_mode));
save_item(NAME(m_irq_reset));
save_item(NAME(m_irq_enable));
save_item(NAME(m_irq_count));
save_item(NAME(m_irq_count_latch));
}
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:17，代码来源:nes_tengen.c
示例5: common_start
void nes_event_device::device_start()
{
common_start();
event_timer = timer_alloc(TIMER_EVENT);
event_timer->adjust(attotime::never);
timer_freq = machine().device<cpu_device>("maincpu")->cycles_to_attotime(1);
save_item(NAME(m_latch));
save_item(NAME(m_count));
save_item(NAME(m_reg));
save_item(NAME(m_reg_write_enable));
save_item(NAME(m_nwc_init));
save_item(NAME(m_timer_count));
save_item(NAME(m_timer_on));
save_item(NAME(m_timer_enabled));
}
开发者ID:DanielAeolusLaude，项目名称:mame，代码行数:17，代码来源:event.c
示例6: common_start
void nes_txrom_device::mmc3_start()
{
common_start();
save_item(NAME(m_mmc_prg_bank));
save_item(NAME(m_mmc_vrom_bank));
save_item(NAME(m_latch));
save_item(NAME(m_wram_protect));
save_item(NAME(m_prg_base));
save_item(NAME(m_prg_mask));
save_item(NAME(m_chr_base));
save_item(NAME(m_chr_mask));
save_item(NAME(m_alt_irq));
save_item(NAME(m_irq_enable));
save_item(NAME(m_irq_count));
save_item(NAME(m_irq_count_latch));
save_item(NAME(m_irq_clear));
}
开发者ID:BrandoCommando，项目名称:mame，代码行数:17，代码来源:mmc3.c
示例7: test_icap_stats
static int
test_icap_stats(void){
struct timeval tv;
int ret = -1;
Gettimeofday(&tv,NULL);
if(common_start()){
goto done;
}
if(init_ctlserver(CUNIT_CTLSERVER)){
goto done;
}
printf(" Testing ICAP statistics (twice)...\n");
if(ctlclient_quiet("icap_stats_dump") < 0){
goto done;
}
if(ctlclient_quiet("pfd_table_dump") < 0){
goto done;
}
if(ctlclient_quiet("snare_dump") < 0){
goto done;
}
time_oqueue_session(&tv);
Gettimeofday(&tv,NULL);
time_oqueue_session(&tv);
Gettimeofday(&tv,NULL);
time_oqueue_session(&tv);
Gettimeofday(&tv,NULL);
time_oqueue_session(&tv);
Gettimeofday(&tv,NULL);
time_oqueue_session(&tv);
Gettimeofday(&tv,NULL);
ret = (ctlclient_quiet("icap_stats_dump") < 0);
ret |= (ctlclient_quiet("pfd_table_dump") < 0);
ret |= (ctlclient_quiet("snare_dump") < 0);
done:
ret |= close_icap_servers();
ret |= reap_poller_thread(snarepoller);
ret |= destroy_poller(snarepoller);
ret |= stop_config();
ret |= stop_fileconf();
ret |= stop_ctlserver();
return ret;
}
开发者ID:dankamongmen，项目名称:snare，代码行数:45，代码来源:test_icapsrv.c
示例8: common_start
void nes_74x377_device::device_start()
{
common_start();
}
开发者ID:DragonMinded，项目名称:mame，代码行数:4，代码来源:discrete.cpp
示例9: common_start
void nes_ffe3_device::device_start()
{
common_start();
}
开发者ID:vorlenko，项目名称:mame，代码行数:4，代码来源:legacy.c
示例10: common_start
void nes_cne_fsb_device::device_start()
{
common_start();
}
开发者ID:Dagarman，项目名称:mame，代码行数:4，代码来源:cne.cpp
示例11: common_start
void nes_sachen_sa0037_device::device_start()
{
common_start();
}
开发者ID:broftkd，项目名称:mame，代码行数:4，代码来源:sachen.cpp
示例12: common_start
void nes_jf19_device::device_start()
{
common_start();
}
开发者ID:Ashura-X，项目名称:mame，代码行数:4，代码来源:jaleco.cpp
示例13: common_start
void nes_hes_device::device_start()
{
common_start();
}
开发者ID:Ander-son，项目名称:libretro-mame，代码行数:4，代码来源:hes.c
示例14: common_start
void nes_karaokestudio_device::device_start()
{
common_start();
}
开发者ID:felipesanches，项目名称:ume，代码行数:4，代码来源:nes_bandai.c
示例15: common_start
void nes_ggenie_device::device_start()
{
common_start();
save_item(NAME(m_gg_bypass));
}
开发者ID:Robbbert，项目名称:store1，代码行数:5，代码来源:ggenie.cpp
示例16: common_start
void nes_oekakids_device::device_start()
{
common_start();
save_item(NAME(m_latch));
save_item(NAME(m_reg));
}
开发者ID:DragonMinded，项目名称:mame，代码行数:6，代码来源:bandai.cpp
注：本文中的common_start函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论