• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ clk_disable函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中clk_disable函数的典型用法代码示例。如果您正苦于以下问题：C++ clk_disable函数的具体用法？C++ clk_disable怎么用？C++ clk_disable使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了clk_disable函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: s5p_g2d_probe

int s5p_g2d_probe(struct platform_device *pdev)
{

	struct resource *res;
	int ret;

#ifdef G2D_DEBUG
	printk("###########################s5p_g2d_probe called\n");
#endif

	/* find the IRQs */
	s5p_g2d_irq_num = platform_get_irq(pdev, 0);
	if(s5p_g2d_irq_num <= 0) {
		printk(KERN_ERR "failed to get irq resouce\n");
                return -ENOENT;
	}

	ret = request_irq(s5p_g2d_irq_num, s5p_g2d_irq, IRQF_DISABLED, pdev->name, NULL);
	if (ret) {
		printk("request_irq(g2d) failed.\n");
		return ret;
	}


	/* get the memory region */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if(res == NULL) {
			printk(KERN_ERR "failed to get memory region resouce\n");
			return -ENOENT;
	}

	s5p_g2d_mem = request_mem_region(res->start, res->end-res->start+1, pdev->name);
	if(s5p_g2d_mem == NULL) {
		printk(KERN_ERR "failed to reserve memory region\n");
                return -ENOENT;
	}


	s5p_g2d_base = ioremap(s5p_g2d_mem->start, s5p_g2d_mem->end - res->start + 1);
	if(s5p_g2d_base == NULL) {
		printk(KERN_ERR "failed ioremap\n");
                return -ENOENT;
	}
#if 1
	s5p_g2d_clock = clk_get(&pdev->dev, "clk_g2d");
	if (IS_ERR(s5p_g2d_clock)) {
			printk(KERN_ERR "failed to find g2d clock source\n");
			return -ENOENT;
	}
	clk_enable(s5p_g2d_clock);
#endif
	init_waitqueue_head(&waitq_g2d);

	ret = misc_register(&s5p_g2d_dev);
	if (ret) {
		printk (KERN_ERR "cannot register miscdev on minor=%d (%d)\n",
			G2D_MINOR, ret);
		return ret;
	}

	h_rot_mutex = (struct mutex *)kmalloc(sizeof(struct mutex), GFP_KERNEL);
	if (h_rot_mutex == NULL)
		return -1;
	
	mutex_init(h_rot_mutex);
	clk_disable(s5p_g2d_clock);
//#ifdef G2D_DEBUG
	printk(KERN_ALERT"##################### s5p_g2d_probe Success\n");
//#endif

	return 0;  
}
开发者ID:Arakmar，项目名称:G3MOD，代码行数:72，代码来源:g2d_dev.c


示例2: hawaii_camera_power_front


//.........这里部分代码省略.........
		regulator_enable(d_gpsr_cam0_1v8);
		usleep_range(1000, 1010);
		regulator_enable(d_3v0_mmc1_vcc);
		usleep_range(1000, 1010);

		if (mm_ccu_set_pll_select(CSI1_BYTE1_PLL, 8)) {
			pr_err("failed to set BYTE1\n");
			goto e_clk_pll;
		}
		if (mm_ccu_set_pll_select(CSI1_BYTE0_PLL, 8)) {
			pr_err("failed to set BYTE0\n");
			goto e_clk_pll;
		}
		if (mm_ccu_set_pll_select(CSI1_CAMPIX_PLL, 8)) {
			pr_err("failed to set PIXPLL\n");
			goto e_clk_pll;
		}

		value = clk_enable(lp_clock_0);
		if (value) {
			printk(KERN_ERR "Failed to enable lp clock 0\n");
			goto e_clk_lp0;
		}

		value = clk_set_rate(lp_clock_0, CSI0_LP_FREQ);
		if (value) {
			pr_err("Failed to set lp clock 0\n");
			goto e_clk_set_lp0;
		}

		value = clk_enable(lp_clock_1);
		if (value) {
			pr_err(KERN_ERR "Failed to enable lp clock 1\n");
			goto e_clk_lp1;
		}

		value = clk_set_rate(lp_clock_1, CSI1_LP_FREQ);
		if (value) {
			pr_err("Failed to set lp clock 1\n");
			goto e_clk_set_lp1;
		}

		value = clk_enable(axi_clk_0);
		if (value) {
			printk(KERN_ERR "Failed to enable axi clock 0\n");
			goto e_clk_axi_clk_0;
		}
		value = clk_enable(axi_clk);
		if (value) {
			printk(KERN_ERR "Failed to enable axi clock 1\n");
			goto e_clk_axi;
		}
		value = clk_enable(clock);
		if (value) {
			printk("Failed to enable sensor 1 clock\n");
			goto e_clk_clock;
		}
		value = clk_set_rate(clock, SENSOR_1_CLK_FREQ);
		if (value) {
			printk("Failed to set sensor 1 clock\n");
			goto e_clk_set_clock;
		}
		usleep_range(10000, 10100);
		gpio_set_value(SENSOR_1_GPIO_PWRDN, 0);
		msleep(30);
	} else {
		gpio_set_value(SENSOR_1_GPIO_PWRDN, 1);
		clk_disable(lp_clock_0);
		clk_disable(lp_clock_1);
		clk_disable(clock);
		clk_disable(axi_clk);
		clk_disable(axi_clk_0);
		regulator_disable(d_lvldo2_cam1_1v8);
		regulator_disable(d_1v8_mmc1_vcc);
		regulator_disable(d_gpsr_cam0_1v8);
		regulator_disable(d_3v0_mmc1_vcc);
		if (pi_mgr_dfs_request_update
		    (&unicam_dfs_node, PI_MGR_DFS_MIN_VALUE)) {
			printk("Failed to set DVFS for unicam\n");
		}
	}
	return 0;

e_clk_set_clock:
	clk_disable(clock);
e_clk_clock:
	clk_disable(axi_clk);
e_clk_axi:
	clk_disable(axi_clk_0);
e_clk_axi_clk_0:
e_clk_set_lp1:
	clk_disable(lp_clock_1);
e_clk_lp1:
e_clk_set_lp0:
	clk_disable(lp_clock_0);
e_clk_lp0:
e_clk_pll:
e_clk_get:
	return ret;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:101，代码来源:board-garnet.c


示例3: s3c_rtc_probe


//.........这里部分代码省略.........
	if (res == NULL) {
		dev_err(&pdev->dev, "failed to get memory region resource\n");
		return -ENOENT;
	}

	s3c_rtc_base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(s3c_rtc_base))
		return PTR_ERR(s3c_rtc_base);

	rtc_clk = devm_clk_get(&pdev->dev, "rtc");
	if (IS_ERR(rtc_clk)) {
		dev_err(&pdev->dev, "failed to find rtc clock source\n");
		ret = PTR_ERR(rtc_clk);
		rtc_clk = NULL;
		return ret;
	}

	clk_prepare_enable(rtc_clk);

	/* check to see if everything is setup correctly */

	s3c_rtc_enable(pdev, 1);

	dev_dbg(&pdev->dev, "s3c2410_rtc: RTCCON=%02x\n",
		 readw(s3c_rtc_base + S3C2410_RTCCON));

	device_init_wakeup(&pdev->dev, 1);

	/* register RTC and exit */

	rtc = devm_rtc_device_register(&pdev->dev, "s3c", &s3c_rtcops,
				  THIS_MODULE);

	if (IS_ERR(rtc)) {
		dev_err(&pdev->dev, "cannot attach rtc\n");
		ret = PTR_ERR(rtc);
		goto err_nortc;
	}

	s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev);

	/* Check RTC Time */

	s3c_rtc_gettime(NULL, &rtc_tm);

	if (rtc_valid_tm(&rtc_tm)) {
		rtc_tm.tm_year	= 100;
		rtc_tm.tm_mon	= 0;
		rtc_tm.tm_mday	= 1;
		rtc_tm.tm_hour	= 0;
		rtc_tm.tm_min	= 0;
		rtc_tm.tm_sec	= 0;

		s3c_rtc_settime(NULL, &rtc_tm);

		dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
	}

	if (s3c_rtc_cpu_type != TYPE_S3C2410)
		rtc->max_user_freq = 32768;
	else
		rtc->max_user_freq = 128;

	if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
		tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
		tmp |= S3C2443_RTCCON_TICSEL;
		writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
	}

	platform_set_drvdata(pdev, rtc);

	s3c_rtc_setfreq(&pdev->dev, 1);

	ret = devm_request_irq(&pdev->dev, s3c_rtc_alarmno, s3c_rtc_alarmirq,
			  0,  "s3c2410-rtc alarm", rtc);
	if (ret) {
		dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
		goto err_alarm_irq;
	}

	ret = devm_request_irq(&pdev->dev, s3c_rtc_tickno, s3c_rtc_tickirq,
			  0,  "s3c2410-rtc tick", rtc);
	if (ret) {
		dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
		goto err_alarm_irq;
	}

	clk_disable(rtc_clk);

	return 0;

 err_alarm_irq:
	platform_set_drvdata(pdev, NULL);

 err_nortc:
	s3c_rtc_enable(pdev, 0);
	clk_disable_unprepare(rtc_clk);

	return ret;
}
开发者ID:realmz，项目名称:blackfin-linux，代码行数:101，代码来源:rtc-s3c.c


示例4: dw_spi_mmio_probe

static int __devinit dw_spi_mmio_probe(struct platform_device *pdev)
{
	struct dw_spi_mmio *dwsmmio;
	struct dw_spi *dws;
	struct resource *mem, *ioarea;
	int ret;

	dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL);
	if (!dwsmmio) {
		ret = -ENOMEM;
		goto err_end;
	}

	dws = &dwsmmio->dws;

	/* Get basic io resource and map it */
	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!mem) {
		dev_err(&pdev->dev, "no mem resource?\n");
		ret = -EINVAL;
		goto err_kfree;
	}

	ioarea = request_mem_region(mem->start, resource_size(mem),
			pdev->name);
	if (!ioarea) {
		dev_err(&pdev->dev, "SPI region already claimed\n");
		ret = -EBUSY;
		goto err_kfree;
	}

	dws->regs = ioremap_nocache(mem->start, resource_size(mem));
	if (!dws->regs) {
		dev_err(&pdev->dev, "SPI region already mapped\n");
		ret = -ENOMEM;
		goto err_release_reg;
	}

	dws->irq = platform_get_irq(pdev, 0);
	if (dws->irq < 0) {
		dev_err(&pdev->dev, "no irq resource?\n");
		ret = dws->irq; /* -ENXIO */
		goto err_unmap;
	}

	dwsmmio->clk = clk_get(&pdev->dev, NULL);
	if (!dwsmmio->clk) {
		ret = -ENODEV;
		goto err_irq;
	}
	clk_enable(dwsmmio->clk);

	dws->parent_dev = &pdev->dev;
	dws->bus_num = 0;
	dws->num_cs = 4;
	dws->max_freq = clk_get_rate(dwsmmio->clk);

	ret = dw_spi_add_host(dws);
	if (ret)
		goto err_clk;

	platform_set_drvdata(pdev, dwsmmio);
	return 0;

err_clk:
	clk_disable(dwsmmio->clk);
	clk_put(dwsmmio->clk);
	dwsmmio->clk = NULL;
err_irq:
	free_irq(dws->irq, dws);
err_unmap:
	iounmap(dws->regs);
err_release_reg:
	release_mem_region(mem->start, resource_size(mem));
err_kfree:
	kfree(dwsmmio);
err_end:
	return ret;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:79，代码来源:dw_spi_mmio.c


示例5: ep93xx_stop_hc

static void ep93xx_stop_hc(struct device *dev)
{
	clk_disable(usb_host_clock);
}
开发者ID:JulianKemmerer，项目名称:Drexel-CS370，代码行数:4，代码来源:ohci-ep93xx.c


示例6: sysmmu_clk_disable

void sysmmu_clk_disable(sysmmu_ips ips)
{
	if (sysmmu_clk[ips])
		clk_disable(sysmmu_clk[ips]);
}
开发者ID:08opt，项目名称:linux，代码行数:5，代码来源:dev-sysmmu.c


示例7: usb_hcd_nxp_probe


//.........这里部分代码省略.........
	__raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);

	ret = i2c_add_driver(&isp1301_driver);
	if (ret < 0) {
		err("failed to add ISP1301 driver");
		goto out;
	}
	i2c_adap = i2c_get_adapter(2);
	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
	strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
						   normal_i2c, NULL);
	i2c_put_adapter(i2c_adap);
	if (!isp1301_i2c_client) {
		err("failed to connect I2C to ISP1301 USB Transceiver");
		ret = -ENODEV;
		goto out_i2c_driver;
	}

	isp1301_configure();

	/* Enable USB PLL */
	usb_clk = clk_get(&pdev->dev, "ck_pll5");
	if (IS_ERR(usb_clk)) {
		err("failed to acquire USB PLL");
		ret = PTR_ERR(usb_clk);
		goto out1;
	}

	ret = clk_enable(usb_clk);
	if (ret < 0) {
		err("failed to start USB PLL");
		goto out2;
	}

	ret = clk_set_rate(usb_clk, 48000);
	if (ret < 0) {
		err("failed to set USB clock rate");
		goto out3;
	}

	__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);

	/* Set to enable all needed USB clocks */
	__raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);

	while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
	       USB_CLOCK_MASK) ;

	hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd) {
		err("Failed to allocate HC buffer");
		ret = -ENOMEM;
		goto out3;
	}

	/* Set all USB bits in the Start Enable register */
	nxp_set_usb_bits();

	hcd->rsrc_start = pdev->resource[0].start;
	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
		dev_dbg(&pdev->dev, "request_mem_region failed\n");
		ret =  -ENOMEM;
		goto out4;
	}
	hcd->regs = (void __iomem *)pdev->resource[0].start;

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		ret = -ENXIO;
		goto out4;
	}

	nxp_start_hc();
	platform_set_drvdata(pdev, hcd);
	ohci = hcd_to_ohci(hcd);
	ohci_hcd_init(ohci);

	dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
	ret = usb_add_hcd(hcd, irq, 0);
	if (ret == 0)
		return ret;

	nxp_stop_hc();
out4:
	nxp_unset_usb_bits();
	usb_put_hcd(hcd);
out3:
	clk_disable(usb_clk);
out2:
	clk_put(usb_clk);
out1:
	i2c_unregister_device(isp1301_i2c_client);
	isp1301_i2c_client = NULL;
out_i2c_driver:
	i2c_del_driver(&isp1301_driver);
out:
	return ret;
}
开发者ID:adis1313，项目名称:android_kernel_samsung_msm8974，代码行数:101，代码来源:ohci-nxp.c


示例8: wkup_m3_init


//.........这里部分代码省略.........
		ret = -ENODEV;
		goto exit;
	}

	ipc_regs = ioremap(A8_M3_IPC_REGS, 0x4*8);
	if (!ipc_regs) {
		pr_err("Could not ioremap the IPC area\b");
		ret = -ENOMEM;
		goto exit;
	}

	m3_eoi = ioremap(M3_TXEV_EOI, 0x4);
	if (!m3_eoi) {
		pr_err("Could not ioremap the EOI register\n");
		ret = -ENOMEM;
		goto err1;
	}

	/* Reserve the MBOX for sending messages to M3 */
	m3_mbox = omap_mbox_get("wkup_m3", &wkup_m3_mbox_notifier);
	if (IS_ERR(m3_mbox)) {
		pr_err("Could not reserve mailbox for A8->M3 IPC\n");
		ret = -ENODEV;
		goto err2;
	}

	/* Enable access to the M3 code and data area from A8 */
	m3_clk = clk_get(NULL, "wkup_m3_fck");
	if (IS_ERR(m3_clk)) {
		pr_err("%s failed to enable WKUP_M3 clock\n", __func__);
		goto err3;
	}

	if (clk_enable(m3_clk)) {
		pr_err("%s WKUP_M3: clock enable Failed\n", __func__);
		goto err4;
	}

	m3_code = ioremap(M3_UMEM, SZ_16K);
	if (!m3_code) {
		pr_err("%s Could not ioremap M3 code space\n", __func__);
		ret = -ENOMEM;
		goto err5;
	}

	pr_info("Trying to load am335x-pm-firmware.bin (60 secs timeout)\n");

	ret = request_firmware(&firmware, "am335x-pm-firmware.bin", mpu_dev);
	if (ret < 0) {
		dev_err(mpu_dev, "request_firmware failed\n");
		goto err6;
	} else {
		memcpy(m3_code, firmware->data, firmware->size);
		pr_info("Copied the M3 firmware to UMEM\n");
	}

	ret = request_irq(AM33XX_IRQ_M3_M3SP_TXEV, wkup_m3_txev_handler,
			  IRQF_DISABLED, "wkup_m3_txev", NULL);
	if (ret) {
		pr_err("%s request_irq failed for 0x%x\n", __func__,
			AM33XX_IRQ_M3_M3SP_TXEV);
		goto err6;
	}

	m3_state = M3_STATE_RESET;

	/*
	 * Invalidate M3 firmware version before hardreset.
	 * Write invalid version in lower 4 nibbles of parameter
	 * register (ipc_regs + 0x8).
	 */
	ipc_reg_r = readl(ipc_regs + 0x8);
	ipc_reg_r &= 0xffff0000;
	m3_version |= ipc_reg_r;
	writel(m3_version, ipc_regs + 0x8);

	ret = omap_hwmod_deassert_hardreset(wkup_m3_oh, "wkup_m3");
	if (ret) {
		pr_err("Could not deassert the reset for WKUP_M3\n");
		goto err6;
	} else {
		return 0;
	}

err6:
	release_firmware(firmware);
	iounmap(m3_code);
err5:
	clk_disable(m3_clk);
err4:
	clk_put(m3_clk);
err3:
	omap_mbox_put(m3_mbox, &wkup_m3_mbox_notifier);
err2:
	iounmap(m3_eoi);
err1:
	iounmap(ipc_regs);
exit:
	return ret;
}
开发者ID:Potin，项目名称:linux-am33x-04.06.00.10，代码行数:101，代码来源:pm33xx.c


示例9: sdhci_pxav3_probe

static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
{
	struct sdhci_pltfm_host *pltfm_host;
	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
	struct device *dev = &pdev->dev;
	struct sdhci_host *host = NULL;
	struct sdhci_pxa *pxa = NULL;
	int ret;
	struct clk *clk;

	pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
	if (!pxa)
		return -ENOMEM;

	host = sdhci_pltfm_init(pdev, NULL);
	if (IS_ERR(host)) {
		kfree(pxa);
		return PTR_ERR(host);
	}
	pltfm_host = sdhci_priv(host);
	pltfm_host->priv = pxa;

	clk = clk_get(dev, "PXA-SDHCLK");
	if (IS_ERR(clk)) {
		dev_err(dev, "failed to get io clock\n");
		ret = PTR_ERR(clk);
		goto err_clk_get;
	}
	pltfm_host->clk = clk;
	clk_enable(clk);

	host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
		| SDHCI_QUIRK_32BIT_ADMA_SIZE;

	/* enable 1/8V DDR capable */
	host->mmc->caps |= MMC_CAP_1_8V_DDR;

	if (pdata) {
		if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
			/* on-chip device */
			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
			host->mmc->caps |= MMC_CAP_NONREMOVABLE;
		}

		/* If slot design supports 8 bit data, indicate this to MMC. */
		if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
			host->mmc->caps |= MMC_CAP_8_BIT_DATA;

		if (pdata->quirks)
			host->quirks |= pdata->quirks;
		if (pdata->host_caps)
			host->mmc->caps |= pdata->host_caps;
		if (pdata->pm_caps)
			host->mmc->pm_caps |= pdata->pm_caps;
	}

	host->ops = &pxav3_sdhci_ops;

	ret = sdhci_add_host(host);
	if (ret) {
		dev_err(&pdev->dev, "failed to add host\n");
		goto err_add_host;
	}

	platform_set_drvdata(pdev, host);

	return 0;

err_add_host:
	clk_disable(clk);
	clk_put(clk);
err_clk_get:
	sdhci_pltfm_free(pdev);
	kfree(pxa);
	return ret;
}
开发者ID:adis1313，项目名称:android_kernel_samsung_msm8974，代码行数:77，代码来源:sdhci-pxav3.c


示例10: tegra_camera_disable_csi

static int tegra_camera_disable_csi(struct tegra_camera_dev *dev)
{
	clk_disable(dev->csi_clk);
	return 0;
}
开发者ID:marcero，项目名称:android-tegra-nv-2.6.39-rel-14r7，代码行数:5，代码来源:tegra_camera.c


示例11: tegra_camera_disable_isp

static int tegra_camera_disable_isp(struct tegra_camera_dev *dev)
{
	clk_disable(dev->isp_clk);
	return 0;
}
开发者ID:marcero，项目名称:android-tegra-nv-2.6.39-rel-14r7，代码行数:5，代码来源:tegra_camera.c


示例12: sh_mobile_sdhi_probe


//.........这里部分代码省略.........
	}

	/*
	 * All SDHI blocks support 2-byte and larger block sizes in 4-bit
	 * bus width mode.
	 */
	mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES;

	/*
	 * All SDHI blocks support SDIO IRQ signalling.
	 */
	mmc_data->flags |= TMIO_MMC_SDIO_IRQ;

	ret = tmio_mmc_host_probe(&host, pdev, mmc_data);
	if (ret < 0)
		goto eprobe;

	/*
	 * Allow one or more specific (named) ISRs or
	 * one or more multiplexed (un-named) ISRs.
	 */

	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
	if (irq >= 0) {
		multiplexed_isr = false;
		ret = request_irq(irq, tmio_mmc_card_detect_irq, 0,
				  dev_name(&pdev->dev), host);
		if (ret)
			goto eirq_card_detect;
	}

	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
	if (irq >= 0) {
		multiplexed_isr = false;
		ret = request_irq(irq, tmio_mmc_sdio_irq, 0,
				  dev_name(&pdev->dev), host);
		if (ret)
			goto eirq_sdio;
	}

	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDCARD);
	if (irq >= 0) {
		multiplexed_isr = false;
		ret = request_irq(irq, tmio_mmc_sdcard_irq, 0,
				  dev_name(&pdev->dev), host);
		if (ret)
			goto eirq_sdcard;
	} else if (!multiplexed_isr) {
		dev_err(&pdev->dev,
			"Principal SD-card IRQ is missing among named interrupts\n");
		ret = irq;
		goto eirq_sdcard;
	}

	if (multiplexed_isr) {
		while (1) {
			irq = platform_get_irq(pdev, i);
			if (irq < 0)
				break;
			i++;
			ret = request_irq(irq, tmio_mmc_irq, 0,
					  dev_name(&pdev->dev), host);
			if (ret)
				goto eirq_multiplexed;
		}

		/* There must be at least one IRQ source */
		if (!i)
			goto eirq_multiplexed;
	}

	dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
		 mmc_hostname(host->mmc), (unsigned long)
		 (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start),
		 mmc_data->hclk / 1000000);

	return ret;

eirq_multiplexed:
	while (i--) {
		irq = platform_get_irq(pdev, i);
		free_irq(irq, host);
	}
eirq_sdcard:
	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_SDIO);
	if (irq >= 0)
		free_irq(irq, host);
eirq_sdio:
	irq = platform_get_irq_byname(pdev, SH_MOBILE_SDHI_IRQ_CARD_DETECT);
	if (irq >= 0)
		free_irq(irq, host);
eirq_card_detect:
	tmio_mmc_host_remove(host);
eprobe:
	clk_disable(priv->clk);
	clk_put(priv->clk);
eclkget:
	kfree(priv);
	return ret;
}
开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:101，代码来源:sh_mobile_sdhi.c


示例13: apollon_init_smc91x

static inline void __init apollon_init_smc91x(void)
{
	unsigned long base;

	unsigned int rate;
	struct clk *gpmc_fck;
	int eth_cs;

	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
	if (IS_ERR(gpmc_fck)) {
		WARN_ON(1);
		return;
	}

	clk_enable(gpmc_fck);
	rate = clk_get_rate(gpmc_fck);

	eth_cs = APOLLON_ETH_CS;

	/* Make sure CS1 timings are correct */
	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);

	if (rate >= 160000000) {
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
	} else if (rate >= 130000000) {
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
	} else {/* rate = 100000000 */
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
	}

	if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
		printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
		goto out;
	}
	apollon_smc91x_resources[0].start = base + 0x300;
	apollon_smc91x_resources[0].end   = base + 0x30f;
	udelay(100);

	omap_cfg_reg(W4__24XX_GPIO74);
	if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
			APOLLON_ETHR_GPIO_IRQ);
		gpmc_cs_free(APOLLON_ETH_CS);
		goto out;
	}
	gpio_direction_input(APOLLON_ETHR_GPIO_IRQ);

out:
	clk_disable(gpmc_fck);
	clk_put(gpmc_fck);
}
开发者ID:AppEngine，项目名称:linux-2.6，代码行数:63，代码来源:board-apollon.c


示例14: mmc_omap_probe


//.........这里部分代码省略.........
	res = request_mem_region(res->start, resource_size(res),
				 pdev->name);
	if (res == NULL)
		return -EBUSY;

	host = kzalloc(sizeof(struct mmc_omap_host), GFP_KERNEL);
	if (host == NULL) {
		ret = -ENOMEM;
		goto err_free_mem_region;
	}

	INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
	INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);

	INIT_WORK(&host->cmd_abort_work, mmc_omap_abort_command);
	setup_timer(&host->cmd_abort_timer, mmc_omap_cmd_timer,
		    (unsigned long) host);

	spin_lock_init(&host->clk_lock);
	setup_timer(&host->clk_timer, mmc_omap_clk_timer, (unsigned long) host);

	spin_lock_init(&host->dma_lock);
	setup_timer(&host->dma_timer, mmc_omap_dma_timer, (unsigned long) host);
	spin_lock_init(&host->slot_lock);
	init_waitqueue_head(&host->slot_wq);

	host->pdata = pdata;
	host->dev = &pdev->dev;
	platform_set_drvdata(pdev, host);

	host->id = pdev->id;
	host->mem_res = res;
	host->irq = irq;

	host->use_dma = 1;
	host->dev->dma_mask = &pdata->dma_mask;
	host->dma_ch = -1;

	host->irq = irq;
	host->phys_base = host->mem_res->start;
	host->virt_base = ioremap(res->start, resource_size(res));
	if (!host->virt_base)
		goto err_ioremap;

	host->iclk = clk_get(&pdev->dev, "ick");
	if (IS_ERR(host->iclk)) {
		ret = PTR_ERR(host->iclk);
		goto err_free_mmc_host;
	}
	clk_enable(host->iclk);

	host->fclk = clk_get(&pdev->dev, "fck");
	if (IS_ERR(host->fclk)) {
		ret = PTR_ERR(host->fclk);
		goto err_free_iclk;
	}

	ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host);
	if (ret)
		goto err_free_fclk;

	if (pdata->init != NULL) {
		ret = pdata->init(&pdev->dev);
		if (ret < 0)
			goto err_free_irq;
	}

	host->nr_slots = pdata->nr_slots;
	for (i = 0; i < pdata->nr_slots; i++) {
		ret = mmc_omap_new_slot(host, i);
		if (ret < 0) {
			while (--i >= 0)
				mmc_omap_remove_slot(host->slots[i]);

			goto err_plat_cleanup;
		}
	}

	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);

	return 0;

err_plat_cleanup:
	if (pdata->cleanup)
		pdata->cleanup(&pdev->dev);
err_free_irq:
	free_irq(host->irq, host);
err_free_fclk:
	clk_put(host->fclk);
err_free_iclk:
	clk_disable(host->iclk);
	clk_put(host->iclk);
err_free_mmc_host:
	iounmap(host->virt_base);
err_ioremap:
	kfree(host);
err_free_mem_region:
	release_mem_region(res->start, resource_size(res));
	return ret;
}
开发者ID:robacklin，项目名称:omap-android，代码行数:101，代码来源:omap.c


示例15: mx6q_sabrelite_sata_exit

static void mx6q_sabrelite_sata_exit(struct device *dev)
{
    clk_disable(sata_clk);
    clk_put(sata_clk);
}
开发者ID:rogrady，项目名称:lin_imx6，代码行数:5，代码来源:board-mx6q_sabrelite.c


示例16: hisik3_wdt_probe

static int __devinit hisik3_wdt_probe(struct platform_device *pdev)
{
        int ret = 0;
        struct resource *res;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                ret = -ENOENT;
                dev_warn(&pdev->dev, "WDT memory resource not defined\n");
                goto err;
        }

        if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
                dev_warn(&pdev->dev, "WDT failed to get memory region resource\n");
                ret = -ENOENT;
                goto err;
        }

        wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
        if (!wdt) {
                dev_warn(&pdev->dev, "WDT kzalloc failed\n");
                ret = -ENOMEM;
                goto err_kzalloc;
        }

        wdt->clk = clk_get(NULL,"clk_wd");
        if (IS_ERR(wdt->clk)) {
                dev_warn(&pdev->dev, "WDT clock not found\n");
                ret = PTR_ERR(wdt->clk);
                goto err_clk_get;
        }

        wdt->base = ioremap(res->start, resource_size(res));
        if (!wdt->base) {
                ret = -ENOMEM;
                dev_warn(&pdev->dev, "WDT ioremap fail\n");
                goto err_ioremap;
        }
        spin_lock_init(&wdt->lock);
        /* This checks if system booted after watchdog reset or not */
        ret = clk_enable(wdt->clk);
	if (ret) {
		dev_warn(&pdev->dev, "clock enable fail");
		goto err_clk_enable;
	}

	wdt->pdev = pdev;
	wdt_default_init(DEFAULT_TIMEOUT);
	wdt_default_config();

	INIT_DELAYED_WORK(&wdt->k3_wdt_delayed_work, wdt_mond);

	schedule_delayed_work(&wdt->k3_wdt_delayed_work, 0);

        ret = misc_register(&hisik3_wdt_miscdev);
        if (ret < 0) {
                dev_warn(&pdev->dev, "WDT cannot register misc device\n");
                goto err_misc_register;
        }

	wdt_enable();

        dev_warn(&pdev->dev,"WDT probing has been finished\n");
        return 0;

err_misc_register:
	clk_disable(wdt->clk);
err_clk_enable:
        iounmap(wdt->base);
err_ioremap:
        clk_put(wdt->clk);
err_clk_get:
        kfree(wdt);
        wdt = NULL;
err_kzalloc:
        release_mem_region(res->start, resource_size(res));
err:
	dev_warn(&pdev->dev, "WDT probe failed!!!\n");
        return ret;
}
开发者ID:printusrzero，项目名称:hwp6s-kernel，代码行数:80，代码来源:hisik3_wdt.c


示例17: omap2_mcspi_disable_clocks

static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi)
{
	clk_disable(mcspi->ick);
	clk_disable(mcspi->fck);
}
开发者ID:12rafael，项目名称:jellytimekernel，代码行数:5，代码来源:omap2_mcspi.c


示例18: dss_clks_disable

static void dss_clks_disable(void)
{
	clk_disable(dss_ick);
	clk_disable(dss_dss_fclk);
	clk_disable(dss_sys_fclk);
}
开发者ID:deviljoe9900，项目名称:Dhollmen_Kernel，代码行数:6，代码来源:board-espresso10-display.c


示例19: ath79_wdt_remove

static int ath79_wdt_remove(struct platform_device *pdev)
{
	misc_deregister(&ath79_wdt_miscdev);
	clk_disable(wdt_clk);
	return 0;
}
开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:6，代码来源:ath79_wdt.c


示例20: h4_init_debug

static inline void __init h4_init_debug(void)
{
	int eth_cs;
	unsigned long cs_mem_base;
	unsigned int muxed, rate;
	struct clk *gpmc_fck;

	eth_cs	= H4_SMC91X_CS;

	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
	if (IS_ERR(gpmc_fck)) {
		WARN_ON(1);
		return;
	}

	clk_enable(gpmc_fck);
	rate = clk_get_rate(gpmc_fck);
	clk_disable(gpmc_fck);
	clk_put(gpmc_fck);

	if (is_gpmc_muxed())
		muxed = 0x200;
	else
		muxed = 0;

	/* Make sure CS1 timings are correct */
	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
			  0x00011000 | muxed);

	if (rate >= 160000000) {
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
	} else if (rate >= 130000000) {
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
	} else {/* rate = 100000000 */
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
	}

	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
		goto out;
	}

	udelay(100);

	omap_cfg_reg(M15_24XX_GPIO92);
	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
		gpmc_cs_free(eth_cs);

out:
	clk_disable(gpmc_fck);
	clk_put(gpmc_fck);
}
开发者ID:AdiPat，项目名称:i9003_Kernel，代码行数:64，代码来源:board-h4.c



注：本文中的clk_disable函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ clk_disable_unprepare函数代码示例发布时间：2022-05-30
下一篇：
C++ clist_next函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap