• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ cli_usage_out函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中cli_usage_out函数的典型用法代码示例。如果您正苦于以下问题：C++ cli_usage_out函数的具体用法？C++ cli_usage_out怎么用？C++ cli_usage_out使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了cli_usage_out函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cli_cmd_peer_probe_cbk

int
cli_cmd_peer_probe_cbk (struct cli_state *state, struct cli_cmd_word *word,
                   const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        dict_t                  *dict = NULL;
        int                     sent = 0;
        int                     parse_error = 0;

        if (!(wordcount == 3)) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_PROBE];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        dict = dict_new ();
        if (!dict)
                goto out;

        ret = dict_set_str (dict, "hostname", (char *)words[2]);
        if (ret)
                goto out;

        ret = valid_internet_address ((char *) words[2], _gf_false);
        if (ret == 1) {
                ret = 0;
        } else {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }
/*        if (words[3]) {
                ret = dict_set_str (dict, "port", (char *)words[3]);
                if (ret)
                        goto out;
        }
*/
        if (proc->fn) {
                ret = proc->fn (frame, THIS, dict);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Peer probe failed");
        }
        if (frame)
                STACK_DESTROY (frame->root);

        return ret;
}
开发者ID:rsevero，项目名称:glusterfs，代码行数:60，代码来源:cli-cmd-peer.c


示例2: cli_cmd_volume_start_cbk

int
cli_cmd_volume_start_cbk (struct cli_state *state, struct cli_cmd_word *word,
                          const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        gf1_cli_start_vol_req    req = {0,};
        int                     sent = 0;
        int                     parse_error = 0;

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        if (wordcount < 3 || wordcount > 4) {
               cli_usage_out (word->pattern);
                parse_error = 1;
               goto out;
        }

        req.volname = (char *)words[2];
        if (!req.volname)
                goto out;

        if (wordcount == 4) {
                if (!strcmp("force", words[3])) {
                        req.flags |= GF_CLI_FLAG_OP_FORCE;
                } else {
                        ret = -1;
                        cli_usage_out (word->pattern);
                        parse_error = 1;
                        goto out;
                }
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_START_VOLUME];

        if (proc->fn) {
                ret = proc->fn (frame, THIS, &req);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume start failed");
        }

        return ret;
}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:51，代码来源:cli-cmd-volume.c


示例3: cli_cmd_peer_status_cbk

int
cli_cmd_peer_status_cbk (struct cli_state *state, struct cli_cmd_word *word,
                        const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        int                     sent = 0;
        int                     parse_error = 0;

        if (wordcount != 2) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_LIST_FRIENDS];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        if (proc->fn) {
                ret = proc->fn (frame, THIS, (char *)words[1] );
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Peer status failed");
        }
        return ret;
}
开发者ID:BillTheBest，项目名称:glusterfs，代码行数:34，代码来源:cli-cmd-peer.c


示例4: cli_cmd_fsm_log_cbk

int
cli_cmd_fsm_log_cbk (struct cli_state *state, struct cli_cmd_word *word,
                     const char **words, int wordcount)
{
        int                             ret = -1;
        rpc_clnt_procedure_t            *proc = NULL;
        call_frame_t                    *frame = NULL;
        char                            *name = "";

        if ((wordcount != 4) && (wordcount != 3)) {
                cli_usage_out (word->pattern);
                goto out;
        }

        if (wordcount == 4)
                name = (char*)words[3];
        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_FSM_LOG];
        if (proc && proc->fn) {
                frame = create_frame (THIS, THIS->ctx->pool);
                if (!frame)
                        goto out;
                ret = proc->fn (frame, THIS, (void*)name);
        }
out:
        return ret;
}
开发者ID:ArikaChen，项目名称:glusterfs，代码行数:26，代码来源:cli-cmd-system.c


示例5: cli_cmd_uuid_reset_cbk

int
cli_cmd_uuid_reset_cbk (struct cli_state *state, struct cli_cmd_word *word,
                        const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        int                     sent = 0;
        int                     parse_error = 0;
        gf_answer_t             answer = GF_ANSWER_NO;
        char                    *question = NULL;
        cli_local_t             *local = NULL;
        dict_t                  *dict  = NULL;
        xlator_t                *this  = NULL;

        question = "Resetting uuid changes the uuid of local glusterd. "
                   "Do you want to continue?";

        if (wordcount != 3) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_UUID_RESET];

        this = THIS;
        frame = create_frame (this, this->ctx->pool);
        if (!frame)
                goto out;

        dict = dict_new ();
        if (!dict) {
                ret = -1;
                goto out;
        }
        CLI_LOCAL_INIT (local, words, frame, dict);
        answer = cli_cmd_get_confirmation (state, question);

        if (GF_ANSWER_NO == answer) {
                ret = 0;
                goto out;
        }

        //send NULL as argument since no dictionary is sent to glusterd
        if (proc->fn) {
                ret = proc->fn (frame, this, dict);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("uuid reset failed");
        }

        CLI_STACK_DESTROY (frame);

        return ret;
}
开发者ID:ArikaChen，项目名称:glusterfs，代码行数:60，代码来源:cli-cmd-system.c


示例6: cli_cmd_volume_rename_cbk

int
cli_cmd_volume_rename_cbk (struct cli_state *state, struct cli_cmd_word *word,
                           const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        dict_t                  *dict = NULL;
        int                     sent = 0;
        int                     parse_error = 0;


        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        dict = dict_new ();
        if (!dict)
                goto out;

        if (wordcount != 4) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        ret = dict_set_str (dict, "old-volname", (char *)words[2]);

        if (ret)
                goto out;

        ret = dict_set_str (dict, "new-volname", (char *)words[3]);

        if (ret)
                goto out;

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_RENAME_VOLUME];

        if (proc->fn) {
                ret = proc->fn (frame, THIS, dict);
        }

out:
        if (dict)
                dict_destroy (dict);

        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume rename on '%s' failed", (char *)words[2]);
        }

        return ret;
}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:54，代码来源:cli-cmd-volume.c


示例7: cli_cmd_volume_remove_brick_cbk

int
cli_cmd_volume_remove_brick_cbk (struct cli_state *state,
                                 struct cli_cmd_word *word, const char **words,
                                 int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        dict_t                  *options = NULL;
        gf_answer_t             answer = GF_ANSWER_NO;
        int                     sent = 0;
        int                     parse_error = 0;

        const char *question = "Removing brick(s) can result in data loss. "
                               "Do you want to Continue?";

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        ret = cli_cmd_volume_remove_brick_parse (words, wordcount, &options);

        if (ret) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        answer = cli_cmd_get_confirmation (state, question);

        if (GF_ANSWER_NO == answer) {
                ret = 0;
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_REMOVE_BRICK];

        if (proc->fn) {
                ret = proc->fn (frame, THIS, options);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume remove-brick failed");
        }

        if (options)
                dict_unref (options);
        return ret;

}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:53，代码来源:cli-cmd-volume.c


示例8: cli_cmd_quota_cbk

int
cli_cmd_quota_cbk (struct cli_state *state, struct cli_cmd_word *word,
                   const char **words, int wordcount)
{

        int                      ret       = 0;
        int                      parse_err = 0;
        int32_t                  type      = 0;
        rpc_clnt_procedure_t    *proc      = NULL;
        call_frame_t            *frame     = NULL;
        dict_t                  *options   = NULL;
        gf_answer_t              answer    = GF_ANSWER_NO;
        const char *question = "Disabling quota will delete all the quota "
                               "configuration. Do you want to continue?";

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_QUOTA];
        if (proc == NULL) {
                ret = -1;
                goto out;
        }

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame) {
                ret = -1;
                goto out;
        }

        ret = cli_cmd_quota_parse (words, wordcount, &options);
        if (ret < 0) {
                cli_usage_out (word->pattern);
                parse_err = 1;
                goto out;
        } else if (dict_get_int32 (options, "type", &type) == 0 &&
                   type == GF_QUOTA_OPTION_TYPE_DISABLE) {
                answer = cli_cmd_get_confirmation (state, question);
                if (answer == GF_ANSWER_NO)
                        goto out;
        }

        if (proc->fn)
                ret = proc->fn (frame, THIS, options);

out:
        if (options)
                dict_unref (options);

        if (ret && parse_err == 0)
                cli_out ("Quota command failed");

        return ret;

}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:52，代码来源:cli-cmd-volume.c


示例9: cli_cmd_snapshot_cbk

int
cli_cmd_snapshot_cbk (struct cli_state *state, struct cli_cmd_word *word,
                      const char **words, int wordcount)
{
        int                      ret       = 0;
        int                      parse_err = 0;
        dict_t                  *options   = NULL;
        rpc_clnt_procedure_t    *proc      = NULL;
        call_frame_t            *frame     = NULL;
        cli_local_t             *local     = NULL;

        proc = &cli_rpc_prog->proctable [GLUSTER_CLI_SNAP];
        if (proc == NULL) {
               ret = -1;
                goto out;
        }

        frame = create_frame (THIS, THIS->ctx->pool);
        if (frame == NULL) {
                ret = -1;
                goto out;
        }

        /* Parses the command entered by the user */
        ret = cli_cmd_snapshot_parse (words, wordcount, &options, state);
        if (ret) {
                if (ret < 0) {
                        cli_usage_out (word->pattern);
                        parse_err = 1;
                } else {
                        /* User might have cancelled the snapshot operation */
                        ret = 0;
                }
                goto out;
        }

        CLI_LOCAL_INIT (local, words, frame, options);

        if (proc->fn)
                ret = proc->fn (frame, THIS, options);

out:
        if (ret && parse_err == 0)
                cli_out ("Snapshot command failed");

        CLI_STACK_DESTROY (frame);

        return ret;
}
开发者ID:GlusterFS，项目名称:glusterfs，代码行数:49，代码来源:cli-cmd-snapshot.c


示例10: cli_cmd_volume_delete_cbk

int
cli_cmd_volume_delete_cbk (struct cli_state *state, struct cli_cmd_word *word,
                           const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        char                    *volname = NULL;
        gf_answer_t             answer = GF_ANSWER_NO;
        const char              *question = NULL;
        int                     sent = 0;
        int                     parse_error = 0;

        question = "Deleting volume will erase all information about the volume. "
                   "Do you want to continue?";
        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_DELETE_VOLUME];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        if (wordcount != 3) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        answer = cli_cmd_get_confirmation (state, question);

        if (GF_ANSWER_NO == answer) {
                ret = 0;
                goto out;
        }

        volname = (char *)words[2];

        if (proc->fn) {
                ret = proc->fn (frame, THIS, volname);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume delete failed");
        }

        return ret;
}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:49，代码来源:cli-cmd-volume.c


示例11: cli_cmd_ganesha_cbk

int cli_cmd_ganesha_cbk (struct cli_state *state, struct cli_cmd_word *word,
                         const char **words, int wordcount)

{
         int                     sent        =   0;
         int                     parse_error =   0;
         int                     ret         =  -1;
         rpc_clnt_procedure_t    *proc       =  NULL;
         call_frame_t            *frame      =  NULL;
         dict_t                  *options    =  NULL;
         cli_local_t             *local      =  NULL;
         char                    *op_errstr  =  NULL;

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_GANESHA];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        ret = cli_cmd_ganesha_parse (state, words, wordcount,
                                     &options, &op_errstr);
        if (ret) {
                if (op_errstr) {
                    cli_err ("%s", op_errstr);
                    GF_FREE (op_errstr);
                } else
                    cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        CLI_LOCAL_INIT (local, words, frame, options);

        if (proc->fn) {
                ret = proc->fn (frame, THIS, options);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Setting global option failed");
        }

        CLI_STACK_DESTROY (frame);
        return ret;
}
开发者ID:RichWpg，项目名称:glusterfs，代码行数:47，代码来源:cli-cmd-global.c


示例12: cli_cmd_volume_replace_brick_cbk

int
cli_cmd_volume_replace_brick_cbk (struct cli_state *state,
                                  struct cli_cmd_word *word,
                                  const char **words,
                                  int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        dict_t                  *options = NULL;
        int                     sent = 0;
        int                     parse_error = 0;

#ifdef GF_SOLARIS_HOST_OS
        cli_out ("Command not supported on Solaris");
        goto out;
#endif
        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_REPLACE_BRICK];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        ret = cli_cmd_volume_replace_brick_parse (words, wordcount, &options);

        if (ret) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        if (proc->fn) {
                ret = proc->fn (frame, THIS, options);
        }

out:
        if (options)
                dict_unref (options);

        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume replace-brick failed");
        }

        return ret;
}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:47，代码来源:cli-cmd-volume.c


示例13: cli_cmd_uuid_get_cbk

int
cli_cmd_uuid_get_cbk (struct cli_state *state, struct cli_cmd_word *word,
                      const char **words, int wordcount)
{
        int                     ret = -1;
        int                     sent = 0;
        int                     parse_error = 0;
        dict_t                  *dict  = NULL;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        cli_local_t             *local = NULL;
        xlator_t                *this  = NULL;

        this = THIS;
        if (wordcount != 3) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_UUID_GET];
        frame = create_frame (this, this->ctx->pool);
        if (!frame)
                goto out;

        dict = dict_new ();
        if (!dict)
                goto out;

        CLI_LOCAL_INIT (local, words, frame, dict);
        if (proc->fn)
                ret = proc->fn (frame, this, dict);

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("uuid get failed");
        }

        if (dict)
                dict_unref (dict);

        CLI_STACK_DESTROY (frame);
        return ret;
}
开发者ID:ArikaChen，项目名称:glusterfs，代码行数:46，代码来源:cli-cmd-system.c


示例14: cli_cmd_sync_volume_cbk

int
cli_cmd_sync_volume_cbk (struct cli_state *state, struct cli_cmd_word *word,
                         const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        gf1_cli_sync_volume_req req = {0,};
        int                     sent = 0;
        int                     parse_error = 0;

        if ((wordcount < 3) || (wordcount > 4)) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        if ((wordcount == 3) || !strcmp(words[3], "all")) {
                req.flags = GF_CLI_SYNC_ALL;
                req.volname = "";
        } else {
                req.volname = (char *)words[3];
        }

        req.hostname = (char *)words[2];

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_SYNC_VOLUME];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        if (proc->fn) {
                ret = proc->fn (frame, THIS, &req);
        }

out:
        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume sync failed");
        }

        return ret;
}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:45，代码来源:cli-cmd-volume.c


示例15: cli_cmd_umount_cbk

int
cli_cmd_umount_cbk (struct cli_state *state, struct cli_cmd_word *word,
                   const char **words, int wordcount)
{
        rpc_clnt_procedure_t *proc = NULL;
        call_frame_t *frame        = NULL;
        int ret                    = -1;
        dict_t *dict               = NULL;

        if (!(wordcount == 3 ||
              (wordcount == 4 && strcmp (words[3], "lazy") == 0))) {
                cli_usage_out (word->pattern);
                goto out;
        }

        dict = dict_new ();
        if (!dict)
                goto out;

        ret = dict_set_str (dict, "path", (char *)words[2]);
        if (ret != 0)
                goto out;
        ret = dict_set_int32 (dict, "lazy", wordcount == 4);
        if (ret != 0)
                goto out;

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_UMOUNT];
        if (proc && proc->fn) {
                frame = create_frame (THIS, THIS->ctx->pool);
                if (!frame)
                        goto out;
                ret = proc->fn (frame, THIS, dict);
        }

 out:
        if (dict)
                dict_unref (dict);

        if (!proc && ret)
                cli_out ("Umount command failed");

        return ret;
}
开发者ID:ArikaChen，项目名称:glusterfs，代码行数:43，代码来源:cli-cmd-system.c


示例16: cli_cmd_volume_top_cbk

int
cli_cmd_volume_top_cbk (struct cli_state *state, struct cli_cmd_word *word,
                          const char **words, int wordcount)
{

        int                     ret      = -1;
        rpc_clnt_procedure_t    *proc    = NULL;
        call_frame_t            *frame   = NULL;
        dict_t                  *options = NULL;
        int                     sent     = 0;
        int                     parse_error = 0;

        ret = cli_cmd_volume_top_parse (words, wordcount, &options);

        if (ret) {
                parse_error = 1;
                cli_usage_out (word->pattern);
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_TOP_VOLUME];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        if (proc->fn) {
                ret = proc->fn (frame, THIS, options);
        }

out:
        if (options)
                dict_unref (options);

        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("Volume top failed");
        }

        return ret;

}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:43，代码来源:cli-cmd-volume.c


示例17: cli_cmd_log_locate_cbk

int
cli_cmd_log_locate_cbk (struct cli_state *state, struct cli_cmd_word *word,
                        const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        dict_t                  *options = NULL;
        int                     sent = 0;
        int                     parse_error = 0;

        if (!((wordcount == 4) || (wordcount == 5))) {
                cli_usage_out (word->pattern);
                parse_error = 1;
                goto out;
        }

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_LOG_LOCATE];

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        ret = cli_cmd_log_locate_parse (words, wordcount, &options);
        if (ret)
                goto out;

        if (proc->fn) {
                ret = proc->fn (frame, THIS, options);
        }

out:
        if (options)
                dict_destroy (options);

        if (ret) {
                cli_cmd_sent_status_get (&sent);
                if ((sent == 0) && (parse_error == 0))
                        cli_out ("getting log file location information failed");
        }

        return ret;
}
开发者ID:pavantc，项目名称:glusterd_scalability，代码行数:43，代码来源:cli-cmd-volume.c


示例18: cli_cmd_pmap_b2p_cbk

int
cli_cmd_pmap_b2p_cbk (struct cli_state *state, struct cli_cmd_word *word,
                 const char **words, int wordcount)
{
        int                     ret = -1;
        rpc_clnt_procedure_t    *proc = NULL;
        call_frame_t            *frame = NULL;
        dict_t                  *dict = NULL;

        frame = create_frame (THIS, THIS->ctx->pool);
        if (!frame)
                goto out;

        dict = dict_new ();
        if (!dict)
                goto out;

        if (wordcount != 4) {
                cli_usage_out (word->pattern);
                goto out;
        }

        ret = dict_set_str (dict, "brick", (char *)words[3]);
        if (ret)
                goto out;

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_PMAP_PORTBYBRICK];
        if (proc->fn) {
                ret = proc->fn (frame, THIS, dict);
        }

out:
        if (!proc && ret) {
                if (dict)
                        dict_destroy (dict);
                if (wordcount > 1)
                        cli_out ("Fetching spec for volume %s failed",
                                 (char *)words[3]);
        }

        return ret;
}
开发者ID:ArikaChen，项目名称:glusterfs，代码行数:42，代码来源:cli-cmd-system.c


示例19: cli_cmd_copy_file_cbk

int
cli_cmd_copy_file_cbk (struct cli_state *state, struct cli_cmd_word *word,
                       const char **words, int wordcount)
{
        int                    ret      = -1;
        rpc_clnt_procedure_t  *proc     = NULL;
        call_frame_t          *frame    = NULL;
        char                  *filename = "";
        dict_t                *dict     = NULL;
        cli_local_t           *local    = NULL;

        if (wordcount != 4) {
                cli_usage_out (word->pattern);
                goto out;
        }

        dict = dict_new ();
        if (!dict)
                goto out;

        filename = (char*)words[3];
        ret = dict_set_str (dict, "source", filename);
        if (ret)
                 gf_log ("", GF_LOG_ERROR, "Unable to set filename in dict");

        ret = dict_set_str (dict, "volname", "N/A");
        if (ret)
                 gf_log ("", GF_LOG_ERROR, "Unable to set volname in dict");

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_COPY_FILE];
        if (proc && proc->fn) {
                frame = create_frame (THIS, THIS->ctx->pool);
                if (!frame)
                        goto out;
                CLI_LOCAL_INIT (local, words, frame, dict);
                ret = proc->fn (frame, THIS, (void*)dict);
        }
out:
        return ret;
}
开发者ID:Anna-Miya-Dan，项目名称:glusterfs，代码行数:40，代码来源:cli-cmd-system.c


示例20: cli_cmd_mount_cbk

int
cli_cmd_mount_cbk (struct cli_state *state, struct cli_cmd_word *word,
                   const char **words, int wordcount)
{
        rpc_clnt_procedure_t *proc = NULL;
        call_frame_t *frame        = NULL;
        int ret                    = -1;
        dict_t *dict               = NULL;
        void *dataa[]              = {NULL, NULL};

        if (wordcount < 4) {
                cli_usage_out (word->pattern);
                goto out;
        }

        dict = make_seq_dict (wordcount - 3, (char **)words + 3);
        if (!dict)
                goto out;

        dataa[0] = (void *)words[2];
        dataa[1] = dict;

        proc = &cli_rpc_prog->proctable[GLUSTER_CLI_MOUNT];
        if (proc && proc->fn) {
                frame = create_frame (THIS, THIS->ctx->pool);
                if (!frame)
                        goto out;
                ret = proc->fn (frame, THIS, dataa);
        }

 out:
        if (dict)
                dict_unref (dict);

        if (!proc && ret)
                cli_out ("Mount command failed");

        return ret;
}
开发者ID:ArikaChen，项目名称:glusterfs，代码行数:39，代码来源:cli-cmd-system.c



注：本文中的cli_usage_out函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ cli_warnmsg函数代码示例发布时间：2022-05-30
下一篇：
C++ cli_shutdown函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap