• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ catchEntity函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中catchEntity函数的典型用法代码示例。如果您正苦于以下问题：C++ catchEntity函数的具体用法？C++ catchEntity怎么用？C++ catchEntity使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了catchEntity函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: catchEntity

void RS_ActionDrawEllipseInscribe::mouseMoveEvent(QMouseEvent* e) {
    RS_DEBUG->print("RS_ActionDrawEllipse4Line::mouseMoveEvent begin");

    if(getStatus() == SetLine4) {
        RS_Entity*  en = catchEntity(e, RS2::EntityLine, RS2::ResolveAll);
        if(!en) return;
        if(!(en->isVisible() && en->rtti()== RS2::EntityLine)) return;
        for(auto p: lines){
            if(en == p) return; //do not pull in the same line again
        }

        if(en->getParent() && en->getParent()->ignoredOnModification()){
                return;
            }

		deletePreview();

		clearLines(true);
		lines.push_back(static_cast<RS_Line*>(en));
		if(preparePreview()) {
			lines.back()->setHighlighted(true);
			graphicView->drawEntity(lines.back());
			RS_Ellipse* e=new RS_Ellipse(preview.get(), *eData);
            preview->addEntity(e);
            drawPreview();
        }

    }
    RS_DEBUG->print("RS_ActionDrawEllipse4Line::mouseMoveEvent end");
}
开发者ID:dinkel，项目名称:LibreCAD，代码行数:30，代码来源:rs_actiondrawellipseinscribe.cpp


示例2: switch

void RS_ActionDrawLineRelAngle::mouseReleaseEvent(QMouseEvent* e) {

    if (e->button()==Qt::LeftButton) {
        switch (getStatus()) {
        case SetEntity: {
				RS_Entity* en = catchEntity(e, enTypeList, RS2::ResolveAll);
				if (en) {
                    entity = en;

                    entity->setHighlighted(true);
                    graphicView->drawEntity(entity);

                    setStatus(SetPos);
                }
            }
            break;

        case SetPos: {
                RS_CoordinateEvent ce(snapPoint(e));
                coordinateEvent(&ce);
            }
            break;

        default:
            break;
        }
    } else if (e->button()==Qt::RightButton) {
        deletePreview();
        if (entity) {
            entity->setHighlighted(false);
            graphicView->drawEntity(entity);
        }
        init(getStatus()-1);
    }
}
开发者ID:aisq2008，项目名称:LibreCAD，代码行数:35，代码来源:rs_actiondrawlinerelangle.cpp


示例3: deletePreview

void RS_ActionDrawLineBisector::mouseReleaseEvent(QMouseEvent* e) {

    if (e->button()==Qt::RightButton) {
        deletePreview();
        init(getStatus()-1);
    } else {

        RS_Vector mouse = RS_Vector(graphicView->toGraphX(e->x()),
                                    graphicView->toGraphY(e->y()));

        switch (getStatus()) {
        case SetLine1: {
                coord1 = mouse;
                RS_Entity* en = catchEntity(e, RS2::ResolveAll);
                if (en!=NULL && en->rtti()==RS2::EntityLine) {
                    line1 = (RS_Line*)en;
                }
            }
            setStatus(SetLine2);
            break;

        case SetLine2:
            coord2 = mouse;
            trigger();
            setStatus(SetLine1);
            break;
        }
    }

}
开发者ID:kevincox，项目名称:LibreCAD，代码行数:30，代码来源:rs_actiondrawlinebisector.cpp


示例4: init

void RS_ActionModifyEntity::mouseReleaseEvent(RS_MouseEvent* e) {
    if (RS2::qtToRsButtonState(e->button())==RS2::RightButton) {
        init(getStatus()-1);
    } else {
        en = catchEntity(e);
        trigger();
    }
}
开发者ID:jacklibj，项目名称:2.0.5.0-1-community.src，代码行数:8，代码来源:rs_actionmodifyentity.cpp


示例5: catchEntity

/**
 * Catches an entity which is close to the mouse cursor.
 *
 * @param e A mouse event.
 * @param level The level of resolving for iterating through the entity
 *        container
 * @return Pointer to the entity or NULL.
 */
RS_Entity* RS_Snapper::catchEntity(RS_MouseEvent* e,
                                   RS2::ResolveLevel level) {

    return catchEntity(
               RS_Vector(graphicView->toGraphX(e->x()),
                         graphicView->toGraphY(e->y())),
               level);
}
开发者ID:jacklibj，项目名称:2.0.5.0-1-community.src，代码行数:16，代码来源:rs_snapper.cpp


示例6: init

void RS_ActionSelectLayer::mouseReleaseEvent(QMouseEvent* e) {
    if (e->button()==Qt::RightButton) {
        init(getStatus()-1);
    } else {
        en = catchEntity(e);
        trigger();
    }
}
开发者ID:0825732889，项目名称:LibreCAD，代码行数:8，代码来源:rs_actionselectlayer.cpp


示例7: init

void RS_ActionSelectSingle::mouseReleaseEvent(QMouseEvent* e) {
    if (e->button()==Qt::RightButton) {
        //need to finish the parent RS_ActionSelect as well, bug#3437138
            //need to check actionSelect is set, bug#3437138
        if(actionSelect) {
            actionSelect->requestFinish(false);
        }
        init(getStatus()-1);
    } else {
        if(entityTypeList.size()) {
//            std::cout<<"RS_ActionSelectSingle::mouseReleaseEvent(): entityTypeList->size()="<< entityTypeList->size()<<std::endl;
            en = catchEntity(e, entityTypeList);
        }else{
            en = catchEntity(e);
        }
        trigger();
    }
}
开发者ID:CNClaus，项目名称:LibreCAD，代码行数:18，代码来源:rs_actionselectsingle.cpp


示例8: switch

void RS_ActionPolylineAdd::mouseReleaseEvent(QMouseEvent* e) {
        if (e->button()==Qt::LeftButton) {
                switch (getStatus()) {
                case ChooseSegment:
                        addEntity = catchEntity(e);
                        if (addEntity==NULL) {
                        RS_DIALOGFACTORY->commandMessage(tr("No Entity found."));
                        } else if (addEntity->rtti()!=RS2::EntityPolyline) {

                        RS_DIALOGFACTORY->commandMessage(
                                tr("Entity must be a polyline."));
                        } else {
                                addEntity->setHighlighted(true);
                                graphicView->drawEntity(addEntity);
                                setStatus(SetAddCoord);
////////////////////////////////////////2006/06/15
                                graphicView->redraw(RS2::RedrawDrawing);
////////////////////////////////////////
                        }
                        break;

                case SetAddCoord:
                        addCoord = snapPoint(e);
                        if (addEntity==NULL) {
                                RS_DIALOGFACTORY->commandMessage(tr("No Entity found."));
                        } else if (!addCoord.valid) {
                                RS_DIALOGFACTORY->commandMessage(tr("Adding point is invalid."));
                        } else {
                                RS_Vector clickCoord = snapPoint(e);
                                addSegment = NULL;
                                double dist = graphicView->toGraphDX(snapRange)*0.9;
                                addSegment =  ((RS_Polyline*)addEntity)->getNearestEntity( clickCoord, &dist, RS2::ResolveNone);
                                if(addSegment == NULL) {
                                        RS_DIALOGFACTORY->commandMessage(
                                                        tr("Adding point is not on entity."));
                                        break;
                                }
                                deleteSnapper();
                                trigger();
                        }
                        break;

                default:
                        break;
                }
        } else if (e->button()==Qt::RightButton) {
                deleteSnapper();
                if (addEntity) {
                        addEntity->setHighlighted(false);
                        graphicView->drawEntity(addEntity);
////////////////////////////////////////2006/06/15
                        graphicView->redraw(RS2::RedrawDrawing);
////////////////////////////////////////
                }
                init(getStatus()-1);
        }
}
开发者ID:Harpalus，项目名称:LibreCAD，代码行数:57，代码来源:rs_actionpolylineadd.cpp


示例9: catchEntity

void RS_ActionDrawEllipseInscribe::mouseReleaseEvent(QMouseEvent* e) {
    // Proceed to next status
    if (e->button()==Qt::LeftButton) {
        if (e==NULL) {
            return;
        }
        RS_Entity*  en = catchEntity(e, RS2::EntityLine, RS2::ResolveAll);
        if(en == NULL) return;
        if(!(en->isVisible() && en->rtti()== RS2::EntityLine)) return;
        for(int i=0;i<getStatus();i++) {
            if(en->getId() == lines[i]->getId()) return; //do not pull in the same line again
        }
        if(en->getParent() != NULL) {
            if ( en->getParent()->rtti() == RS2::EntityInsert         /**Insert*/
                    || en->getParent()->rtti() == RS2::EntitySpline
                    || en->getParent()->rtti() == RS2::EntityText         /**< Text 15*/
                    || en->getParent()->rtti() == RS2::EntityDimAligned   /**< Aligned Dimension */
                    || en->getParent()->rtti() == RS2::EntityDimLinear    /**< Linear Dimension */
                    || en->getParent()->rtti() == RS2::EntityDimRadial    /**< Radial Dimension */
                    || en->getParent()->rtti() == RS2::EntityDimDiametric /**< Diametric Dimension */
                    || en->getParent()->rtti() == RS2::EntityDimAngular   /**< Angular Dimension */
                    || en->getParent()->rtti() == RS2::EntityDimLeader    /**< Leader Dimension */
                    ){
                return;
        }
        }
        lines.resize(getStatus());
        lines.push_back(static_cast<RS_Line*>(en));

        switch (getStatus()) {
        case SetLine1:
        case SetLine2:
        case SetLine3:
            en->setHighlighted(true);
            setStatus(getStatus()+1);
            graphicView->redraw(RS2::RedrawDrawing);
            break;
        case SetLine4:
            if( preparePreview()) {
                trigger();
            }

        default:
            break;
        }
    } else if (e->button()==Qt::RightButton) {
        // Return to last status:
        if(getStatus()>0){
            lines[getStatus()-1]->setHighlighted(false);
            lines.pop_back();
            graphicView->redraw(RS2::RedrawDrawing);
            deletePreview();

        }
        init(getStatus()-1);
    }
}
开发者ID:RobertvonKnobloch，项目名称:LibreCAD，代码行数:57，代码来源:rs_actiondrawellipseinscribe.cpp


示例10: catchEntity

void RS_ActionModifyRound::mouseMoveEvent(RS_MouseEvent* e) {
    RS_DEBUG->print("RS_ActionModifyRound::mouseMoveEvent begin");

    RS_Vector mouse = graphicView->toGraph(e->x(), e->y());
    RS_Entity* se = catchEntity(e, RS2::ResolveAll);

    switch (getStatus()) {
    case SetEntity1:
        entity1 = se;
        coord1 = mouse;
        break;

    case SetEntity2:
        entity2 = se;
        coord2 = mouse;

        if (entity1!=NULL && entity2!=NULL && entity2->isAtomic() &&
			RS_Information::isTrimmable(entity1, entity2)) {

            deletePreview();
            clearPreview();
            //preview->addSelectionFrom(*container);
            //preview->move(targetPoint-referencePoint);
            RS_Entity* tmp1 = entity1->clone();
            RS_Entity* tmp2 = entity2->clone();
            tmp1->reparent(preview);
            tmp2->reparent(preview);
            preview->addEntity(tmp1);
            preview->addEntity(tmp2);

            bool trim = data.trim;
            data.trim = false;
            RS_Modification m(*preview, NULL, false);
            m.round(coord2,
                    coord1,
                    (RS_AtomicEntity*)tmp1,
                    coord2,
                    (RS_AtomicEntity*)tmp2,
                    data);
            data.trim = trim;

            preview->removeEntity(tmp1);
            preview->removeEntity(tmp2);
            drawPreview();
        }
        break;

    default:
        break;
    }

    RS_DEBUG->print("RS_ActionModifyRound::mouseMoveEvent end");
}
开发者ID:Akaur，项目名称:qdraw，代码行数:53，代码来源:rs_actionmodifyround.cpp


示例11: catchEntity

RS_Entity* RS_ActionDrawCircleTan1_2P::catchCircle(QMouseEvent* e) {
    RS_Entity* ret=NULL;
    RS_Entity*  en = catchEntity(e,enTypeList, RS2::ResolveAll);
    if(en == NULL) return ret;
    if(en->isVisible()==false) return ret;
    if(en->getParent() != NULL) {
        if ( en->getParent()->ignoredOnModification()){
            return NULL;
        }
    }
    return en;
}
开发者ID:CERobertson，项目名称:LibreCAD，代码行数:12，代码来源:rs_actiondrawcircletan1_2p.cpp


示例12: catchEntity

RS_Entity* RS_ActionDrawCircleTan1_2P::catchCircle(QMouseEvent* e) {
	RS_Entity* ret=nullptr;
	RS_Entity* en = catchEntity(e,enTypeList, RS2::ResolveAll);
	if (!en) return ret;
	if (!en->isVisible()) return ret;
	if (en->getParent()) {
        if ( en->getParent()->ignoredOnModification()){
			return nullptr;
        }
    }
    return en;
}
开发者ID:Aly1029，项目名称:LibreCAD，代码行数:12，代码来源:rs_actiondrawcircletan1_2p.cpp


示例13: switch

void RS_ActionPolylineDel::mouseReleaseEvent(QMouseEvent* e) {
    if (e->button()==Qt::LeftButton) {
                switch (getStatus()) {
                case ChooseEntity:
                    delEntity = catchEntity(e);
                    if (delEntity==NULL) {
                        RS_DIALOGFACTORY->commandMessage(tr("No Entity found."));
                    } else if (delEntity->rtti()!=RS2::EntityPolyline) {

                        RS_DIALOGFACTORY->commandMessage(
                            tr("Entity must be a polyline."));
                    } else {
							snapPoint(e);
                                delEntity->setHighlighted(true);
                                graphicView->drawEntity(delEntity);
                                setStatus(SetDelPoint);
////////////////////////////////////////2006/06/15
                                graphicView->redraw();
////////////////////////////////////////
                    }
                    break;

                case SetDelPoint:
                    delPoint = snapPoint(e);
                    if (delEntity==NULL) {
                                RS_DIALOGFACTORY->commandMessage(tr("No Entity found."));
                    } else if (!delPoint.valid) {
                                RS_DIALOGFACTORY->commandMessage(tr("Deleting point is invalid."));
                    } else if (!delEntity->isPointOnEntity(delPoint)) {
                                RS_DIALOGFACTORY->commandMessage(
                                    tr("Deleting point is not on entity."));
                    } else {
                                deleteSnapper();
                                trigger();
                    }
                    break;

                default:
                    break;
                }
    } else if (e->button()==Qt::RightButton) {
                deleteSnapper();
                if (delEntity) {
                delEntity->setHighlighted(false);
                graphicView->drawEntity(delEntity);
////////////////////////////////////////2006/06/15
                        graphicView->redraw();
////////////////////////////////////////
                }
                init(getStatus()-1);
    }
}
开发者ID:Harpalus，项目名称:LibreCAD，代码行数:52，代码来源:rs_actionpolylinedel.cpp


示例14: catchEntity

RS_Entity* RS_ActionDrawCircleTan2_1P::catchCircle(QMouseEvent* e) {
    RS_Entity* ret=NULL;
    RS_Entity*  en = catchEntity(e,enTypeList, RS2::ResolveAll);
    if(en == NULL) return ret;
    if(en->isVisible()==false) return ret;
	for(auto p: circles){
		if(p && en->getId() == p->getId()) return ret; //do not pull in the same line again
    }
	if(en->getParent() && en->getParent()->ignoredOnModification()){
		return nullptr;
	}
	return en;
}
开发者ID:Harpalus，项目名称:LibreCAD，代码行数:13，代码来源:rs_actiondrawcircletan2_1p.cpp


示例15: mouse

void RS_ActionDrawLineRelAngle::mouseMoveEvent(QMouseEvent* e) {
    RS_DEBUG->print("RS_ActionDrawLineRelAngle::mouseMoveEvent begin");

    RS_Vector mouse(graphicView->toGraphX(e->x()),
                    graphicView->toGraphY(e->y()));

    switch (getStatus()) {
    case SetEntity:
        entity = catchEntity(e, RS2::ResolveAll);
        break;

    case SetPos: {
            //length = graphicView->toGraphDX(graphicView->getWidth());
            //RS_Vector mouse = snapPoint(e);
            pos = snapPoint(e);

            /*RS_Creation creation(NULL, NULL);
            RS_Line* l = creation.createLineRelAngle(mouse,
                         entity,
                         angle,
                         length);*/

            deletePreview();

            RS_Creation creation(preview, NULL, false);
            creation.createLineRelAngle(pos,
                                        entity,
                                        angle,
                                        length);

            drawPreview();

            /*if (l!=NULL) {
                if (line!=NULL) {
                    delete line;
                }
                line = (RS_Line*)l->clone();

                deletePreview();
                preview->addEntity(l);
                drawPreview();
        }*/
        }
        break;

    default:
        break;
    }

    RS_DEBUG->print("RS_ActionDrawLineRelAngle::mouseMoveEvent end");
}
开发者ID:0825732889，项目名称:LibreCAD，代码行数:51，代码来源:rs_actiondrawlinerelangle.cpp


示例16: catchEntity

RS_Entity* RS_ActionDrawCircleTan2::catchCircle(QMouseEvent* e) {
    RS_Entity*  en = catchEntity(e,enTypeList, RS2::ResolveAll);
	if(en == nullptr) return nullptr;
	if(en->isVisible()==false) return nullptr;
    for(int i=0;i<getStatus();i++) {
		if(en->getId() == circles[i]->getId()) return nullptr; //do not pull in the same line again
    }
	if(en->getParent()) {
        if ( en->getParent()->ignoredOnModification()){
			return nullptr;
        }
    }
    return en;
}
开发者ID:Harpalus，项目名称:LibreCAD，代码行数:14，代码来源:rs_actiondrawcircletan2.cpp


示例17: deletePreview

void RS_ActionDrawLineOrthTan::mouseReleaseEvent(QMouseEvent* e) {

    if (e->button()==Qt::RightButton) {
        if( normal != NULL) {
            normal->setHighlighted(false);
            graphicView->drawEntity(normal);
        }
            if (tangent != NULL) {
                    delete tangent;
                    tangent=NULL;
            }
        deletePreview();
        if (getStatus() == SetLine) {
                finish(false);
        }else{
                init(getStatus()-1);
        }
    } else {
        switch (getStatus()) {
        case SetLine: {
            RS_Entity* en=catchEntity(e,RS2::EntityLine);
            if(en != NULL){
                if (en->getLength() < RS_TOLERANCE) {
                    //ignore lines not long enough
                    break;
                }
                if(normal != NULL) {
                    normal->setHighlighted(false);
                    graphicView->drawEntity(normal);
                }
                normal=static_cast<RS_Line*>(en);
                normal->setHighlighted(true);
                graphicView->drawEntity(normal);
                setStatus(SetCircle);
            }
        }
            break;

        case SetCircle:
            if(tangent!=NULL){
                trigger();
            }
            break;
        default:
            break;
        }
    }

}
开发者ID:0825732889，项目名称:LibreCAD，代码行数:49，代码来源:rs_actiondrawlineorthtan.cpp


示例18: catchEntity

void RS_ActionDrawCircleInscribe::mouseReleaseEvent(QMouseEvent* e) {
    // Proceed to next status
    if (e->button()==Qt::LeftButton) {
		if (!e) {
            return;
        }
        RS_Entity*  en = catchEntity(e, RS2::EntityLine, RS2::ResolveAll);
		if(!en) return;
        if(!(en->isVisible() && en->rtti()== RS2::EntityLine)) return;
        for(int i=0;i<getStatus();i++) {
            if(en->getId() == lines[i]->getId()) return; //do not pull in the same line again
        }
		if(en->getParent()) {
			if ( en->getParent()->ignoredOnModification()) return;
        }
		while((int) lines.size()>getStatus()){
			lines.back()->setHighlighted(false);
			graphicView->drawEntity(lines.back());
			lines.pop_back();
		}
		lines.push_back(static_cast<RS_Line*>(en));
		pPoints->coord= graphicView->toGraph(e->x(), e->y());
        switch (getStatus()) {
        case SetLine1:
        case SetLine2:
			en->setHighlighted(true);
			setStatus(getStatus()+1);
			graphicView->redraw(RS2::RedrawDrawing);
			break;
        case SetLine3:
            if( preparePreview()) {
                trigger();
            }

        default:
            break;
        }
    } else if (e->button()==Qt::RightButton) {
        // Return to last status:
		if(getStatus()>0){
			clearLines(true);
			lines.back()->setHighlighted(false);
			lines.pop_back();
            graphicView->redraw(RS2::RedrawDrawing);
            deletePreview();
        }
        init(getStatus()-1);
    }
}
开发者ID:Rupicapra-rupicapra，项目名称:LibreCAD，代码行数:49，代码来源:rs_actiondrawcircleinscribe.cpp


示例19: RS_Vector

void RS_ActionDrawLineBisector::mouseMoveEvent(QMouseEvent* e) {
    RS_DEBUG->print("RS_ActionDrawLineBisector::mouseMoveEvent begin");

    RS_Vector mouse = RS_Vector(graphicView->toGraphX(e->x()),
                                graphicView->toGraphY(e->y()));

    switch (getStatus()) {
    case SetLine1:
        break;

    case SetLine2: {
            coord2 = mouse;
            RS_Entity* en = catchEntity(e, RS2::ResolveAll);
			if(en==line1) break;
			if (en && en->rtti()==RS2::EntityLine) {
				if(line2 && line2->isHighlighted()){
					line2->setHighlighted(false);
				}
				line2 = static_cast<RS_Line*>(en);
				line2->setHighlighted(true);
				graphicView->redraw(RS2::RedrawDrawing);

                deletePreview();

				RS_Creation creation(preview.get(), nullptr, false);
                creation.createBisector(coord1,
                                        coord2,
                                        length,
                                        number,
                                        line1,
                                        line2);
                drawPreview();
			}else{
				if(line2 && line2->isHighlighted()){
					line2->setHighlighted(false);
					graphicView->redraw(RS2::RedrawDrawing);
				}
				line2=nullptr;

			}
        }
        break;

    default:
        break;
    }

    RS_DEBUG->print("RS_ActionDrawLineBisector::mouseMoveEvent end");
}
开发者ID:Harpalus，项目名称:LibreCAD，代码行数:49，代码来源:rs_actiondrawlinebisector.cpp


示例20: mouseReleaseEvent

void RS_ActionPolylineAppend::mouseReleaseEvent(QMouseEvent* e) {
        if (e->button()==Qt::LeftButton) {
		if (getStatus()==SetStartpoint) {
			originalPolyline = dynamic_cast<RS_Polyline*>(catchEntity(e));
			if (!originalPolyline) {
				RS_DIALOGFACTORY->commandMessage(tr("No Entity found."));
                                return;
			} else if (originalPolyline->rtti()!=RS2::EntityPolyline) {
				RS_DIALOGFACTORY->commandMessage(
					tr("Entity must be a polyline."));
                                return;
                        } else if (originalPolyline->isClosed()) {
                            RS_DIALOGFACTORY->commandMessage(
                                    tr("Can not append nodes in a closed polyline."));
                            return;
                        } else {
				snapPoint(e);
				RS_Polyline* op=static_cast<RS_Polyline*>(originalPolyline);
				RS_Entity* entFirst = op->firstEntity();
				RS_Entity* entLast = op->lastEntity();
				double dist = graphicView->toGraphDX(snapRange)*0.9;
				RS_Entity* nearestSegment = originalPolyline->getNearestEntity( RS_Vector(graphicView->toGraphX(e->x()),
									graphicView->toGraphY(e->y())), &dist, RS2::ResolveNone);
				polyline = static_cast<RS_Polyline*>(originalPolyline->clone());
				container->addEntity(polyline);
				prepend = false;
				if (nearestSegment == entFirst){
					prepend = true;
                                        point = originalPolyline->getStartpoint();
				}else if (nearestSegment == entLast){
                                        point = originalPolyline->getEndpoint();
				}else{
					RS_DIALOGFACTORY->commandMessage(
						tr("Click somewhere near the beginning or end of existing polyline."));
				}
			}
		}
		RS_CoordinateEvent ce(snapPoint(e));
		coordinateEvent(&ce);
        } else if (e->button()==Qt::RightButton) {
		if (getStatus()==SetNextPoint) {
			trigger();
		}
		// deletePreview();
		//clearPreview();
		deleteSnapper();
		init(getStatus()-1);
	}
}
开发者ID:rmamba，项目名称:LibreCAD，代码行数:49，代码来源:rs_actionpolylineappend.cpp



注：本文中的catchEntity函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ category函数代码示例发布时间：2022-05-30
下一篇：
C++ cat函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap