• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ bytesChanged函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中bytesChanged函数的典型用法代码示例。如果您正苦于以下问题：C++ bytesChanged函数的具体用法？C++ bytesChanged怎么用？C++ bytesChanged使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了bytesChanged函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mempoolSizeChanged

void ClientModel::updateTimer()
{
    // no locking required at this point
    // the following calls will acquire the required lock
    Q_EMIT mempoolSizeChanged(m_node.getMempoolSize(), m_node.getMempoolDynamicUsage());
    Q_EMIT bytesChanged(m_node.getTotalBytesRecv(), m_node.getTotalBytesSent());
}
开发者ID:Chovanec，项目名称:bitcoin，代码行数:7，代码来源:clientmodel.cpp


示例2: TRY_LOCK

void ClientModel::updateTimer()
{
    // Get required lock upfront. This avoids the GUI from getting stuck on
    // periodical polls if the core is holding the locks for a longer time -
    // for example, during a wallet rescan.
    TRY_LOCK(cs_main, lockMain);
    if(!lockMain)
        return;
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();

    // check for changed number of blocks we have, number of blocks peers claim to have, reindexing state and importing state
    if (cachedNumBlocks != newNumBlocks ||
        cachedReindexing != fReindex || cachedImporting != fImporting)
    {
        cachedNumBlocks = newNumBlocks;
        cachedReindexing = fReindex;
        cachedImporting = fImporting;

        emit numBlocksChanged(newNumBlocks);
    }

    emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:KendrickBitz，项目名称:cryptotarget，代码行数:25，代码来源:clientmodel.cpp


示例3: getNumBlocks

void ClientModel::updateTimer()
{
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();
    int newNumHeaders = getNumHeaders();
    int totalMissing = getTotalMissing();
    int trieComplete = getTrieComplete();

    //printf("Tick\n");

    // check for changed number of blocks we have, number of blocks peers claim to have, reindexing state and importing state
    if (cachedNumBlocks != newNumBlocks || cachedNumHeaders != newNumHeaders ||
        cachedReindexing != fReindex || cachedImporting != fImporting || cachedTrieOnline != fTrieOnline ||
	cachedTotalMissing != totalMissing || cachedTrieComplete != trieComplete || cachedValidating != fValidating ||
	cachedProgress != nProgress)
    {
        cachedNumBlocks = newNumBlocks;
        cachedNumHeaders = newNumHeaders;
	cachedTotalMissing = totalMissing;
        cachedReindexing = fReindex;
        cachedImporting = fImporting;
	cachedTrieOnline = fTrieOnline;
	cachedTrieComplete = trieComplete;
	cachedValidating = fValidating;
	cachedProgress = nProgress;

        // ensure we return the maximum of newNumBlocksTotal and newNumBlocks to not create weird displays in the GUI
        emit numBlocksChanged(newNumBlocks, newNumHeaders);
    }

    emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:JacobBruce，项目名称:Cryptonite，代码行数:33，代码来源:clientmodel.cpp


示例4: connect

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if(model)
    {
        // Subscribe to information, replies, messages, errors
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks());
        connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());

        setNumConnections(model->getNumConnections());
        ui->isTestNet->setChecked(model->isTestNet());
    }
}
开发者ID:BoodleKing，项目名称:Boodle，代码行数:25，代码来源:rpcconsole.cpp


示例5: setNumConnections

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if(model)
    {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks());
        connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());

        ui->networkName->setText(model->getNetworkName());
    }
}
开发者ID:Stennsan，项目名称:ziftrcoin，代码行数:25，代码来源:rpcconsole.cpp


示例6: TRY_LOCK

void ClientModel::updateTimer()
{
    // Get required lock upfront. This avoids the GUI from getting stuck on
    // periodical polls if the core is holding the locks for a longer time -
    // for example, during a wallet rescan.
    TRY_LOCK(cs_main, lockMain);
    if(!lockMain)
        return;
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();
    int newNumBlocksOfPeers = getNumBlocksOfPeers();

    if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
    {
        cachedNumBlocks = newNumBlocks;
        cachedNumBlocksOfPeers = newNumBlocksOfPeers;
		
        emit numBlocksChanged(newNumBlocks, newNumBlocksOfPeers);
	}
	if (GetArg("-suppressnetworkgraph", "false") != "true")
	{
		emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
	}
    
}
开发者ID:Erkan-Yilmaz，项目名称:Gridcoin-Research，代码行数:26，代码来源:clientmodel.cpp


示例7: bytesChanged

void TelegramFileLocation::setBytes(const QByteArray &bytes)
{
    if(p->bytes == bytes)
        return;

    p->bytes = bytes;
    Q_EMIT bytesChanged();
}
开发者ID:Aseman-Land，项目名称:TelegramQML，代码行数:8，代码来源:telegramfilelocation.cpp


示例8: bytesChanged

void MessageContainerBase::setBytes(const QByteArray& bytes) {
    
    if(!this->isValidFormat(bytes)) {
        return;
    }
    
    emit bytesChanged(this->bytesBuffer);
    emit textChanged(this->textBlock);
}
开发者ID:sassman，项目名称:stegano.kde4，代码行数:9，代码来源:messagecontainer.cpp


示例9: setNumConnections

void RPCConsole::setClientModel(ClientModel* model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if (model) {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks());
        connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));

        setMasternodeCount(model->getMasternodeCountString());
        connect(model, SIGNAL(strMasternodesChanged(QString)), this, SLOT(setMasternodeCount(QString)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64, quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);

        // connect the peerWidget selection model to our peerSelected() handler
        connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection&, const QItemSelection&)),
            this, SLOT(peerSelected(const QItemSelection&, const QItemSelection&)));
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());
        ui->networkName->setText(QString::fromStdString(Params().NetworkIDString()));

        //Setup autocomplete and attach it
        QStringList wordList;
        std::vector<std::string> commandList = tableRPC.listCommands();
        for (size_t i = 0; i < commandList.size(); ++i)
        {
            wordList << commandList[i].c_str();
        }

        autoCompleter = new QCompleter(wordList, this);
        ui->lineEdit->setCompleter(autoCompleter);

        // clear the lineEdit after activating from QCompleter
        autoCompleter->popup()->installEventFilter(this);
    }
}
开发者ID:nashanas，项目名称:ColossusCoinXT，代码行数:55，代码来源:rpcconsole.cpp


示例10: setNumConnections

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if(model)
    {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks(), model->getLastBlockDate());
        connect(model, SIGNAL(numBlocksChanged(int,QDateTime)), this, SLOT(setNumBlocks(int,QDateTime)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);

        // create context menu actions
        QAction* disconnectAction = new QAction(tr("&Disconnect Node"), this);

        // create context menu
        contextMenu = new QMenu();
        contextMenu->addAction(disconnectAction);

        // context menu signals
        connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showMenu(const QPoint&)));
        connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));

        // connect the peerWidget selection model to our peerSelected() handler
        connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
             this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientUserAgent->setText(model->formatSubVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());
        ui->networkName->setText(QString::fromStdString(Params().NetworkIDString()));
    }
}
开发者ID:recalibrate，项目名称:bitcoin，代码行数:52，代码来源:rpcconsole.cpp


示例11: getNumBlocks

void ClientModel::updateTimer()
{
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();
    int newNumBlocksOfPeers = getNumBlocksOfPeers();

    if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
    {
        cachedNumBlocks = newNumBlocks;
        cachedNumBlocksOfPeers = newNumBlocksOfPeers;

        emit numBlocksChanged(newNumBlocks, newNumBlocksOfPeers);
    }

    emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:sppl，项目名称:iti，代码行数:17，代码来源:clientmodel.cpp


示例12: getNumBlocks

void ClientModel::updateTimer()
{
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();
    int newNumBlocksOfPeers = getNumBlocksOfPeers();

    if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
    {
        cachedNumBlocks = newNumBlocks;
        cachedNumBlocksOfPeers = newNumBlocksOfPeers;

        // ensure we return the maximum of newNumBlocksOfPeers and newNumBlocks to not create weird displays in the GUI 
        emit numBlocksChanged(newNumBlocks, std::max(newNumBlocksOfPeers, newNumBlocks)); 
    }
	
	    emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:lightsplasher，项目名称:Truckcoin，代码行数:18，代码来源:clientmodel.cpp


示例13: setNumConnections

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if(model)
    {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks());
        connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));

        setMasternodeCount(model->getMasternodeCountString());
        connect(model, SIGNAL(strMasternodesChanged(QString)), this, SLOT(setMasternodeCount(QString)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);

        // connect the peerWidget selection model to our peerSelected() handler
        connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
             this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());

        ui->networkName->setText(QString::fromStdString(Params().NetworkIDString()));
    }
}
开发者ID:bagcoin，项目名称:bagcoin，代码行数:43，代码来源:rpcconsole.cpp


示例14: setNumConnections

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if(model)
    {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks());
        connect(model, SIGNAL(numBlocksChanged(int)), this, SLOT(setNumBlocks(int)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        columnResizingFixer = new GUIUtil::TableViewLastColumnResizingFixer(ui->peerWidget, MINIMUM_COLUMN_WIDTH, MINIMUM_COLUMN_WIDTH);

        // connect the peerWidget's selection model to our peerSelected() handler
        QItemSelectionModel *peerSelectModel = ui->peerWidget->selectionModel();
        connect(peerSelectModel, SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
             this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());

        ui->networkName->setText(model->getNetworkName());
    }
}
开发者ID:KryptonDon，项目名称:bitcoin，代码行数:40，代码来源:rpcconsole.cpp


示例15: getNumBlocks

void ClientModel::updateTimer()
{
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();
    int newNumBlocksOfPeers = getNumBlocksOfPeers();

    // check for changed number of blocks we have, number of blocks peers claim to have, reindexing state and importing state
    if (cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers ||
        cachedReindexing != fReindex || cachedImporting != fImporting)
    {
        cachedNumBlocks = newNumBlocks;
        cachedNumBlocksOfPeers = newNumBlocksOfPeers;
        cachedReindexing = fReindex;
        cachedImporting = fImporting;

        // ensure we return the maximum of newNumBlocksOfPeers and newNumBlocks to not create weird displays in the GUI
        emit numBlocksChanged(newNumBlocks, std::max(newNumBlocksOfPeers, newNumBlocks));
    }

    emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:csbitcoin，项目名称:sidecoin，代码行数:22，代码来源:clientmodel.cpp


示例16: TRY_LOCK

void ClientModel::updateTimer()
{
    // Get required lock upfront. This avoids the GUI from getting stuck on
    // periodical polls if the core is holding the locks for a longer time -
    // for example, during a wallet rescan.
    TRY_LOCK(cs_main, lockMain);
    if(!lockMain)
        return;
    // Some quantities (such as number of blocks) change so fast that we don't want to be notified for each change.
    // Periodically check and update with a timer.
    int newNumBlocks = getNumBlocks();
    int newNumBlocksOfPeers = getNumBlocksOfPeers();

    if(cachedNumBlocks != newNumBlocks || cachedNumBlocksOfPeers != newNumBlocksOfPeers)
    {
        cachedNumBlocks = newNumBlocks;
        cachedNumBlocksOfPeers = newNumBlocksOfPeers;

        // ensure we return the maximum of newNumBlocksOfPeers and newNumBlocks to not create weird displays in the GUI
        emit numBlocksChanged(newNumBlocks, std::max(newNumBlocksOfPeers, newNumBlocks));
    }
    
    emit bytesChanged(getTotalBytesRecv(), getTotalBytesSent());
}
开发者ID:ChemCoin，项目名称:Chemcoin，代码行数:24，代码来源:clientmodel.cpp


示例17: setNumConnections

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if (model && clientModel->getPeerTableModel() && clientModel->getBanTableModel()) {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks(), model->getLastBlockDate());
        connect(model, SIGNAL(numBlocksChanged(int,QDateTime)), this, SLOT(setNumBlocks(int,QDateTime)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
        ui->peerWidget->horizontalHeader()->setStretchLastSection(true);

        // create peer table context menu actions
        QAction* disconnectAction = new QAction(tr("&Disconnect Node"), this);
        QAction* banAction1h      = new QAction(tr("Ban Node for") + " " + tr("1 &hour"), this);
        QAction* banAction24h     = new QAction(tr("Ban Node for") + " " + tr("1 &day"), this);
        QAction* banAction7d      = new QAction(tr("Ban Node for") + " " + tr("1 &week"), this);
        QAction* banAction365d    = new QAction(tr("Ban Node for") + " " + tr("1 &year"), this);

        // create peer table context menu
        peersTableContextMenu = new QMenu();
        peersTableContextMenu->addAction(disconnectAction);
        peersTableContextMenu->addAction(banAction1h);
        peersTableContextMenu->addAction(banAction24h);
        peersTableContextMenu->addAction(banAction7d);
        peersTableContextMenu->addAction(banAction365d);

        // Add a signal mapping to allow dynamic context menu arguments.
        // We need to use int (instead of int64_t), because signal mapper only supports
        // int or objects, which is okay because max bantime (1 year) is < int_max.
        QSignalMapper* signalMapper = new QSignalMapper(this);
        signalMapper->setMapping(banAction1h, 60*60);
        signalMapper->setMapping(banAction24h, 60*60*24);
        signalMapper->setMapping(banAction7d, 60*60*24*7);
        signalMapper->setMapping(banAction365d, 60*60*24*365);
        connect(banAction1h, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction24h, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction7d, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction365d, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(banSelectedNode(int)));

        // peer table context menu signals
        connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showPeersTableContextMenu(const QPoint&)));
        connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));

        // peer table signal handling - update peer details when selecting new node
        connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
            this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
        // peer table signal handling - update peer details when new nodes are added to the model
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));

        // set up ban table
        ui->banlistWidget->setModel(model->getBanTableModel());
        ui->banlistWidget->verticalHeader()->hide();
        ui->banlistWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->banlistWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->banlistWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->banlistWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->banlistWidget->setColumnWidth(BanTableModel::Address, BANSUBNET_COLUMN_WIDTH);
        ui->banlistWidget->setColumnWidth(BanTableModel::Bantime, BANTIME_COLUMN_WIDTH);
        ui->banlistWidget->horizontalHeader()->setStretchLastSection(true);

        // create ban table context menu action
        QAction* unbanAction = new QAction(tr("&Unban Node"), this);

        // create ban table context menu
        banTableContextMenu = new QMenu();
        banTableContextMenu->addAction(unbanAction);

        // ban table context menu signals
        connect(ui->banlistWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showBanTableContextMenu(const QPoint&)));
        connect(unbanAction, SIGNAL(triggered()), this, SLOT(unbanSelectedNode()));

        // ban table signal handling - clear peer details when clicking a peer in the ban table
        connect(ui->banlistWidget, SIGNAL(clicked(const QModelIndex&)), this, SLOT(clearSelectedNode()));
        // ban table signal handling - ensure ban table is shown or hidden (if empty)
        connect(model->getBanTableModel(), SIGNAL(layoutChanged()), this, SLOT(showOrHideBanTableIfRequired()));
        showOrHideBanTableIfRequired();

        // Provide initial values
        ui->clientVersion->setText(model->formatFullVersion());
        ui->clientUserAgent->setText(model->formatSubVersion());
        ui->clientName->setText(model->clientName());
        ui->buildDate->setText(model->formatBuildDate());
        ui->startupTime->setText(model->formatClientStartupTime());
//.........这里部分代码省略.........
开发者ID:josephbisch，项目名称:namecoin-core-1，代码行数:101，代码来源:rpcconsole.cpp


示例18: setNumConnections

void RPCConsole::setClientModel(ClientModel *model)
{
    clientModel = model;
    ui->trafficGraph->setClientModel(model);
    if (model && clientModel->getPeerTableModel() && clientModel->getBanTableModel()) {
        // Keep up to date with client
        setNumConnections(model->getNumConnections());
        connect(model, SIGNAL(numConnectionsChanged(int)), this, SLOT(setNumConnections(int)));

        setNumBlocks(model->getNumBlocks(), model->getLastBlockDate(), model->getVerificationProgress(nullptr), false);
        connect(model, SIGNAL(numBlocksChanged(int,QDateTime,double,bool)), this, SLOT(setNumBlocks(int,QDateTime,double,bool)));

        updateNetworkState();
        connect(model, SIGNAL(networkActiveChanged(bool)), this, SLOT(setNetworkActive(bool)));

        updateTrafficStats(model->getTotalBytesRecv(), model->getTotalBytesSent());
        connect(model, SIGNAL(bytesChanged(quint64,quint64)), this, SLOT(updateTrafficStats(quint64, quint64)));

        connect(model, SIGNAL(mempoolSizeChanged(long,size_t)), this, SLOT(setMempoolSize(long,size_t)));

        // set up peer table
        ui->peerWidget->setModel(model->getPeerTableModel());
        ui->peerWidget->verticalHeader()->hide();
        ui->peerWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->peerWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->peerWidget->setSelectionMode(QAbstractItemView::ExtendedSelection);
        ui->peerWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->peerWidget->setColumnWidth(PeerTableModel::Address, ADDRESS_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Subversion, SUBVERSION_COLUMN_WIDTH);
        ui->peerWidget->setColumnWidth(PeerTableModel::Ping, PING_COLUMN_WIDTH);
        ui->peerWidget->horizontalHeader()->setStretchLastSection(true);

        // create peer table context menu actions
        QAction* disconnectAction = new QAction(tr("&Disconnect"), this);
        QAction* banAction1h      = new QAction(tr("Ban for") + " " + tr("1 &hour"), this);
        QAction* banAction24h     = new QAction(tr("Ban for") + " " + tr("1 &day"), this);
        QAction* banAction7d      = new QAction(tr("Ban for") + " " + tr("1 &week"), this);
        QAction* banAction365d    = new QAction(tr("Ban for") + " " + tr("1 &year"), this);

        // create peer table context menu
        peersTableContextMenu = new QMenu(this);
        peersTableContextMenu->addAction(disconnectAction);
        peersTableContextMenu->addAction(banAction1h);
        peersTableContextMenu->addAction(banAction24h);
        peersTableContextMenu->addAction(banAction7d);
        peersTableContextMenu->addAction(banAction365d);

        // Add a signal mapping to allow dynamic context menu arguments.
        // We need to use int (instead of int64_t), because signal mapper only supports
        // int or objects, which is okay because max bantime (1 year) is < int_max.
        QSignalMapper* signalMapper = new QSignalMapper(this);
        signalMapper->setMapping(banAction1h, 60*60);
        signalMapper->setMapping(banAction24h, 60*60*24);
        signalMapper->setMapping(banAction7d, 60*60*24*7);
        signalMapper->setMapping(banAction365d, 60*60*24*365);
        connect(banAction1h, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction24h, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction7d, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(banAction365d, SIGNAL(triggered()), signalMapper, SLOT(map()));
        connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(banSelectedNode(int)));

        // peer table context menu signals
        connect(ui->peerWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showPeersTableContextMenu(const QPoint&)));
        connect(disconnectAction, SIGNAL(triggered()), this, SLOT(disconnectSelectedNode()));

        // peer table signal handling - update peer details when selecting new node
        connect(ui->peerWidget->selectionModel(), SIGNAL(selectionChanged(const QItemSelection &, const QItemSelection &)),
            this, SLOT(peerSelected(const QItemSelection &, const QItemSelection &)));
        // peer table signal handling - update peer details when new nodes are added to the model
        connect(model->getPeerTableModel(), SIGNAL(layoutChanged()), this, SLOT(peerLayoutChanged()));
        // peer table signal handling - cache selected node ids
        connect(model->getPeerTableModel(), SIGNAL(layoutAboutToBeChanged()), this, SLOT(peerLayoutAboutToChange()));
        
        // set up ban table
        ui->banlistWidget->setModel(model->getBanTableModel());
        ui->banlistWidget->verticalHeader()->hide();
        ui->banlistWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
        ui->banlistWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
        ui->banlistWidget->setSelectionMode(QAbstractItemView::SingleSelection);
        ui->banlistWidget->setContextMenuPolicy(Qt::CustomContextMenu);
        ui->banlistWidget->setColumnWidth(BanTableModel::Address, BANSUBNET_COLUMN_WIDTH);
        ui->banlistWidget->setColumnWidth(BanTableModel::Bantime, BANTIME_COLUMN_WIDTH);
        ui->banlistWidget->horizontalHeader()->setStretchLastSection(true);

        // create ban table context menu action
        QAction* unbanAction = new QAction(tr("&Unban"), this);

        // create ban table context menu
        banTableContextMenu = new QMenu(this);
        banTableContextMenu->addAction(unbanAction);

        // ban table context menu signals
        connect(ui->banlistWidget, SIGNAL(customContextMenuRequested(const QPoint&)), this, SLOT(showBanTableContextMenu(const QPoint&)));
        connect(unbanAction, SIGNAL(triggered()), this, SLOT(unbanSelectedNode()));

        // ban table signal handling - clear peer details when clicking a peer in the ban table
        connect(ui->banlistWidget, SIGNAL(clicked(const QModelIndex&)), this, SLOT(clearSelectedNode()));
        // ban table signal handling - ensure ban table is shown or hidden (if empty)
        connect(model->getBanTableModel(), SIGNAL(layoutChanged()), this, SLOT(showOrHideBanTableIfRequired()));
        showOrHideBanTableIfRequired();
//.........这里部分代码省略.........
开发者ID:AmesianX，项目名称:bitcoin，代码行数:101，代码来源:rpcconsole.cpp



注：本文中的bytesChanged函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ bytesWritten函数代码示例发布时间：2022-05-30
下一篇：
C++ bytesAvailable函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap