• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ btd_get_dbus_connection函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中btd_get_dbus_connection函数的典型用法代码示例。如果您正苦于以下问题：C++ btd_get_dbus_connection函数的具体用法？C++ btd_get_dbus_connection怎么用？C++ btd_get_dbus_connection使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了btd_get_dbus_connection函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: bnep_watchdog_cb

static gboolean bnep_watchdog_cb(GIOChannel *chan, GIOCondition cond,
				gpointer data)
{
	struct network_conn *nc = data;
	DBusConnection *conn = btd_get_dbus_connection();
	const char *path = device_get_path(nc->peer->device);

	g_dbus_emit_property_changed(conn, path,
					NETWORK_PEER_INTERFACE, "Connected");
	g_dbus_emit_property_changed(conn, path,
					NETWORK_PEER_INTERFACE, "Interface");
	g_dbus_emit_property_changed(conn, path,
					NETWORK_PEER_INTERFACE, "UUID");
	device_remove_disconnect_watch(nc->peer->device, nc->dc_id);
	nc->dc_id = 0;

	btd_service_disconnecting_complete(nc->service, 0);

	info("%s disconnected", nc->dev);

	bnep_if_down(nc->dev);
	nc->state = DISCONNECTED;
	memset(nc->dev, 0, sizeof(nc->dev));
	strcpy(nc->dev, "bnep%d");

	return FALSE;
}
开发者ID:DaisyPi，项目名称:sensortag，代码行数:27，代码来源:connection.c


示例2: g_new0

static struct network_peer *create_peer(struct btd_device *device)
{
	struct network_peer *peer;
	const char *path;

	peer = g_new0(struct network_peer, 1);
	peer->device = btd_device_ref(device);

	path = device_get_path(device);

	if (g_dbus_register_interface(btd_get_dbus_connection(), path,
					NETWORK_PEER_INTERFACE,
					connection_methods,
					NULL, connection_properties,
					peer, path_unregister) == FALSE) {
		error("D-Bus failed to register %s interface",
			NETWORK_PEER_INTERFACE);
		peer_free(peer);
		return NULL;
	}

	DBG("Registered interface %s on path %s",
		NETWORK_PEER_INTERFACE, path);

	return peer;
}
开发者ID:DaisyPi，项目名称:sensortag，代码行数:26，代码来源:connection.c


示例3: sap_io_destroy

static void sap_io_destroy(void *data)
{
	struct sap_server *server = data;
	struct sap_connection *conn = server->conn;

	DBG("conn %p", conn);

	if (!conn || !conn->io)
		return;

	stop_guard_timer(server);

	if (conn->state != SAP_STATE_CONNECT_IN_PROGRESS &&
				conn->state != SAP_STATE_CONNECT_MODEM_BUSY)
		g_dbus_emit_property_changed(btd_get_dbus_connection(),
					adapter_get_path(server->adapter),
					SAP_SERVER_INTERFACE,
					"Connected");

	if (conn->state == SAP_STATE_CONNECT_IN_PROGRESS ||
			conn->state == SAP_STATE_CONNECT_MODEM_BUSY ||
			conn->state == SAP_STATE_CONNECTED ||
			conn->state == SAP_STATE_GRACEFUL_DISCONNECT)
		sap_disconnect_req(server, 1);

	sap_server_remove_conn(server);
}
开发者ID:AndroidXperia，项目名称:android_external_bluetooth_bluez，代码行数:27，代码来源:server.c


示例4: sap_server_unregister

void sap_server_unregister(const char *path)
{
	g_dbus_unregister_interface(btd_get_dbus_connection(),
						path, SAP_SERVER_INTERFACE);

	sap_exit();
}
开发者ID:AndroidXperia，项目名称:android_external_bluetooth_bluez，代码行数:7，代码来源:server.c


示例5: agent_sendfd

static gboolean agent_sendfd(struct hf_agent *agent, int fd,
		DBusPendingCallNotifyFunction notify, void *data)
{
	struct audio_device *dev = data;
	struct gateway *gw = dev->gateway;
	DBusMessage *msg;

	if (agent->call)
		return FALSE;

	msg = dbus_message_new_method_call(agent->name, agent->path,
			"org.bluez.HandsfreeAgent", "NewConnection");

	dbus_message_append_args(msg, DBUS_TYPE_UNIX_FD, &fd,
					DBUS_TYPE_UINT16, &gw->version,
					DBUS_TYPE_INVALID);

	if (dbus_connection_send_with_reply(btd_get_dbus_connection(), msg,
						&agent->call, -1) == FALSE) {
		dbus_message_unref(msg);
		return FALSE;
	}

	dbus_pending_call_set_notify(agent->call, notify, dev, NULL);
	dbus_message_unref(msg);

	return TRUE;
}
开发者ID:intgr，项目名称:bluez，代码行数:28，代码来源:gateway.c


示例6: controlpoint_method_reply

static void controlpoint_method_reply(struct controlpoint_req *req,
								uint8_t code)
{
	DBusMessage *reply;

	switch (code) {
	case RSP_SUCCESS:
		reply = dbus_message_new_method_return(req->msg);
		break;
	case RSP_NOT_SUPPORTED:
		reply = btd_error_not_supported(req->msg);
		break;
	case RSP_INVALID_PARAM:
		reply = btd_error_invalid_args(req->msg);
		break;
	case RSP_FAILED:
		reply = btd_error_failed(req->msg, "Failed");
		break;
	default:
		reply = btd_error_failed(req->msg, "Unknown error");
		break;
	}

	g_dbus_send_message(btd_get_dbus_connection(), reply);

	dbus_message_unref(req->msg);
}
开发者ID:CarbonDevXperia，项目名称:android_external_bluetooth_bluez，代码行数:27，代码来源:cyclingspeed.c


示例7: read_location_cb

static void read_location_cb(guint8 status, const guint8 *pdu,
						guint16 len, gpointer user_data)
{
	struct csc *csc = user_data;
	uint8_t value;
	ssize_t vlen;

	if (status) {
		error("Sensor Location read failed: %s", att_ecode2str(status));
		return;
	}

	vlen = dec_read_resp(pdu, len, &value, sizeof(value));
	if (vlen < 0) {
		error("Protocol error");
		return;
	}

	if (vlen != sizeof(value)) {
		error("Invalid value length for Sensor Location");
		return;
	}

	csc->has_location = TRUE;
	csc->location = value;

	g_dbus_emit_property_changed(btd_get_dbus_connection(),
					device_get_path(csc->dev),
					CYCLINGSPEED_INTERFACE, "Location");
}
开发者ID:CarbonDevXperia，项目名称:android_external_bluetooth_bluez，代码行数:30，代码来源:cyclingspeed.c


示例8: new0

static struct notify_client *notify_client_create(struct characteristic *chrc,
							const char *owner)
{
	struct notify_client *client;

	client = new0(struct notify_client, 1);
	if (!client)
		return NULL;

	client->chrc = chrc;
	client->owner = strdup(owner);
	if (!client->owner) {
		free(client);
		return NULL;
	}

	client->watch = g_dbus_add_disconnect_watch(btd_get_dbus_connection(),
						owner, notify_client_disconnect,
						client, NULL);
	if (!client->watch) {
		free(client->owner);
		free(client);
		return NULL;
	}

	return notify_client_ref(client);
}
开发者ID:GeniALE，项目名称:BlueZDev，代码行数:27，代码来源:gatt-client.c


示例9: display_pincode_request_new

static int display_pincode_request_new(struct agent_request *req,
					const char *device_path,
					const char *pincode)
{
	struct agent *agent = req->agent;

	req->msg = dbus_message_new_method_call(agent->owner, agent->path,
					AGENT_INTERFACE, "DisplayPinCode");
	if (req->msg == NULL) {
		error("Couldn't allocate D-Bus message");
		return -ENOMEM;
	}

	dbus_message_append_args(req->msg,
					DBUS_TYPE_OBJECT_PATH, &device_path,
					DBUS_TYPE_STRING, &pincode,
					DBUS_TYPE_INVALID);

	if (g_dbus_send_message_with_reply(btd_get_dbus_connection(), req->msg,
				&req->call, REQUEST_TIMEOUT) == FALSE) {
		error("D-Bus send failed");
		return -EIO;
	}

	dbus_pending_call_set_notify(req->call, display_pincode_reply,
								req, NULL);

	return 0;
}
开发者ID:DaisyPi，项目名称:sensortag，代码行数:29，代码来源:agent.c


示例10: csc_device_remove

static void csc_device_remove(struct btd_service *service)
{
	struct btd_device *device = btd_service_get_device(service);
	struct btd_adapter *adapter;
	struct csc_adapter *cadapter;
	struct csc *csc;
	GSList *l;

	adapter = device_get_adapter(device);

	cadapter = find_csc_adapter(adapter);
	if (cadapter == NULL)
		return;

	l = g_slist_find_custom(cadapter->devices, device, cmp_device);
	if (l == NULL)
		return;

	csc = l->data;

	cadapter->devices = g_slist_remove(cadapter->devices, csc);

	g_dbus_unregister_interface(btd_get_dbus_connection(),
						device_get_path(device),
						CYCLINGSPEED_INTERFACE);
}
开发者ID:CarbonDevXperia，项目名称:android_external_bluetooth_bluez，代码行数:26，代码来源:cyclingspeed.c


示例11: immediate_timeout

static gboolean immediate_timeout(gpointer user_data)
{
	struct monitor *monitor = user_data;
	const char *path = device_get_path(monitor->device);

	monitor->immediateto = 0;

	if (g_strcmp0(monitor->immediatelevel, "none") == 0)
		return FALSE;

	if (monitor->attrib) {
		uint8_t value = ALERT_NONE;
		gatt_write_cmd(monitor->attrib, monitor->immediatehandle,
				&value, 1, NULL, NULL);
	}

	g_free(monitor->immediatelevel);
	monitor->immediatelevel = g_strdup("none");


	g_dbus_emit_property_changed(btd_get_dbus_connection(), path,
				PROXIMITY_INTERFACE, "ImmediateAlertLevel");

	return FALSE;
}
开发者ID:LegacySlimXperia，项目名称:android_hardware_semc，代码行数:25，代码来源:monitor.c


示例12: device_get_path

static struct monitor *register_monitor(struct btd_device *device)
{
	const char *path = device_get_path(device);
	struct monitor *monitor;
	char *level;

	monitor = find_monitor(device);
	if (monitor != NULL)
		return monitor;

	level = read_proximity_config(device, "LinkLossAlertLevel");

	monitor = g_new0(struct monitor, 1);
	monitor->device = btd_device_ref(device);
	monitor->linklosslevel = (level ? : g_strdup("high"));
	monitor->signallevel = g_strdup("unknown");
	monitor->immediatelevel = g_strdup("none");

	monitors = g_slist_append(monitors, monitor);

	if (g_dbus_register_interface(btd_get_dbus_connection(), path,
				PROXIMITY_INTERFACE,
				NULL, NULL, monitor_device_properties,
				monitor, monitor_destroy) == FALSE) {
		error("D-Bus failed to register %s interface",
						PROXIMITY_INTERFACE);
		monitor_destroy(monitor);
		return NULL;
	}

	DBG("Registered interface %s on path %s", PROXIMITY_INTERFACE, path);

	return monitor;
}
开发者ID:LegacySlimXperia，项目名称:android_hardware_semc，代码行数:34，代码来源:monitor.c


示例13: controlpoint_write_cb

static void controlpoint_write_cb(guint8 status, const guint8 *pdu, guint16 len,
							gpointer user_data)
{
	struct controlpoint_req *req = user_data;

	if (status == 0) {
		req->timeout = g_timeout_add_seconds(ATT_TIMEOUT,
							controlpoint_timeout,
							req);
		return;
	}

	error("SC Control Point write failed (opcode=%d)", req->opcode);

	if (req->opcode == UPDATE_SENSOR_LOC) {
		g_dbus_pending_property_error(req->reply_id,
					ERROR_INTERFACE ".Failed",
					"Operation failed (%d)", status);
	} else if  (req->opcode == SET_CUMULATIVE_VALUE) {
		DBusMessage *reply;

		reply = btd_error_failed(req->msg, "Operation failed");

		g_dbus_send_message(btd_get_dbus_connection(), reply);

		dbus_message_unref(req->msg);
	}

	req->csc->pending_req = NULL;
	g_free(req);
}
开发者ID:CarbonDevXperia，项目名称:android_external_bluetooth_bluez，代码行数:31，代码来源:cyclingspeed.c


示例14: set_setting

static int set_setting(const char *key, const char *value, void *user_data)
{
	struct media_player *mp = user_data;
	const char *iface = MEDIA_PLAYER_INTERFACE;
	DBusMessage *msg;
	DBusMessageIter iter;

	DBG("%s = %s", key, value);

	if (!g_hash_table_lookup(mp->settings, key))
		return -EINVAL;

	msg = dbus_message_new_method_call(mp->sender, mp->path,
					DBUS_INTERFACE_PROPERTIES, "Set");
	if (msg == NULL) {
		error("Couldn't allocate D-Bus message");
		return -ENOMEM;
	}

	dbus_message_iter_init_append(msg, &iter);
	dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, &iface);

	if (strcasecmp(key, "Shuffle") == 0)
		set_shuffle_setting(&iter, value);
	else if (strcasecmp(key, "Repeat") == 0)
		set_repeat_setting(&iter, value);

	g_dbus_send_message(btd_get_dbus_connection(), msg);

	return 0;
}
开发者ID:Thread974，项目名称:bz，代码行数:31，代码来源:media.c


示例15: agent_display_passkey

int agent_display_passkey(struct agent *agent, struct btd_device *device,
				uint32_t passkey, uint16_t entered)
{
	DBusMessage *message;
	const char *dev_path = device_get_path(device);

	message = dbus_message_new_method_call(agent->owner, agent->path,
					AGENT_INTERFACE, "DisplayPasskey");
	if (!message) {
		error("Couldn't allocate D-Bus message");
		return -1;
	}

	dbus_message_append_args(message,
				DBUS_TYPE_OBJECT_PATH, &dev_path,
				DBUS_TYPE_UINT32, &passkey,
				DBUS_TYPE_UINT16, &entered,
				DBUS_TYPE_INVALID);

	if (!g_dbus_send_message(btd_get_dbus_connection(), message)) {
		error("D-Bus send failed");
		return -1;
	}

	return 0;
}
开发者ID:DaisyPi，项目名称:sensortag，代码行数:26，代码来源:agent.c


示例16: write_result_cb

static void write_result_cb(bool success, bool reliable_error,
					uint8_t att_ecode, void *user_data)
{
	struct async_dbus_op *op = user_data;
	DBusMessage *reply;

	if (op->complete && !op->complete(op->data)) {
		reply = btd_error_failed(op->msg, "Operation failed");
		goto done;
	}

	if (!success) {
		if (reliable_error)
			reply = btd_error_failed(op->msg,
						"Reliable write failed");
		else
			reply = create_gatt_dbus_error(op->msg, att_ecode);

		goto done;
	}

	reply = g_dbus_create_reply(op->msg, DBUS_TYPE_INVALID);
	if (!reply) {
		error("Failed to allocate D-Bus message reply");
		return;
	}

done:
	g_dbus_send_message(btd_get_dbus_connection(), reply);
}
开发者ID:GeniALE，项目名称:BlueZDev，代码行数:30，代码来源:gatt-client.c


示例17: read_ext_props_cb

static void read_ext_props_cb(bool success, uint8_t att_ecode,
					const uint8_t *value, uint16_t length,
					void *user_data)
{
	struct characteristic *chrc = user_data;
	struct service *service = chrc->service;

	if (!success) {
		error("Failed to obtain extended properties - error: 0x%02x",
								att_ecode);
		return;
	}

	if (!value || length != 2) {
		error("Malformed extended properties value");
		return;
	}

	chrc->ext_props = get_le16(value);
	if (chrc->ext_props)
		g_dbus_emit_property_changed(btd_get_dbus_connection(),
						chrc->path,
						GATT_CHARACTERISTIC_IFACE,
						"Flags");

	queue_remove(service->pending_ext_props, chrc);

	notify_chrcs(service);
}
开发者ID:GeniALE，项目名称:BlueZDev，代码行数:29，代码来源:gatt-client.c


示例18: confirmation_request_new

static int confirmation_request_new(struct agent_request *req,
					const char *device_path,
					uint32_t passkey)
{
	struct agent *agent = req->agent;

	req->msg = dbus_message_new_method_call(agent->name, agent->path,
				"org.bluez.Agent", "RequestConfirmation");
	if (req->msg == NULL) {
		error("Couldn't allocate D-Bus message");
		return -ENOMEM;
	}

	dbus_message_append_args(req->msg,
				DBUS_TYPE_OBJECT_PATH, &device_path,
				DBUS_TYPE_UINT32, &passkey,
				DBUS_TYPE_INVALID);

	if (dbus_connection_send_with_reply(btd_get_dbus_connection(), req->msg,
				&req->call, REQUEST_TIMEOUT) == FALSE) {
		error("D-Bus send failed");
		return -EIO;
	}

	dbus_pending_call_set_notify(req->call, simple_agent_reply, req, NULL);

	return 0;
}
开发者ID:intgr，项目名称:bluez，代码行数:28，代码来源:agent.c


示例19: cleanup_monitor

static void cleanup_monitor(struct monitor *monitor)
{
	struct btd_device *device = monitor->device;
	const char *path = device_get_path(device);

	if (monitor->immediate != NULL || monitor->txpower != NULL)
		return;

	if (monitor->immediateto != 0) {
		g_source_remove(monitor->immediateto);
		monitor->immediateto = 0;
	}

	if (monitor->linkloss != NULL)
		return;

	if (monitor->attioid != 0) {
		btd_device_remove_attio_callback(device, monitor->attioid);
		monitor->attioid = 0;
	}

	if (monitor->attrib != NULL) {
		g_attrib_unref(monitor->attrib);
		monitor->attrib = NULL;
	}

	g_dbus_unregister_interface(btd_get_dbus_connection(), path,
							PROXIMITY_INTERFACE);
}
开发者ID:LegacySlimXperia，项目名称:android_hardware_semc，代码行数:29，代码来源:monitor.c


示例20: confirm_mode_change_request_new

static int confirm_mode_change_request_new(struct agent_request *req,
						const char *mode)
{
	struct agent *agent = req->agent;

	req->msg = dbus_message_new_method_call(agent->name, agent->path,
				"org.bluez.Agent", "ConfirmModeChange");
	if (req->msg == NULL) {
		error("Couldn't allocate D-Bus message");
		return -ENOMEM;
	}

	dbus_message_append_args(req->msg,
				DBUS_TYPE_STRING, &mode,
				DBUS_TYPE_INVALID);

	if (dbus_connection_send_with_reply(btd_get_dbus_connection(), req->msg,
					&req->call, REQUEST_TIMEOUT) == FALSE) {
		error("D-Bus send failed");
		return -EIO;
	}

	dbus_pending_call_set_notify(req->call, simple_agent_reply, req, NULL);
	return 0;
}
开发者ID:intgr，项目名称:bluez，代码行数:25，代码来源:agent.c



注：本文中的btd_get_dbus_connection函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ btd_service_get_device函数代码示例发布时间：2022-05-30
下一篇：
C++ btd_error_invalid_args函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap