• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTMP_OS_NETDEV_GET_PRIV函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTMP_OS_NETDEV_GET_PRIV函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMP_OS_NETDEV_GET_PRIV函数的具体用法？C++ RTMP_OS_NETDEV_GET_PRIV怎么用？C++ RTMP_OS_NETDEV_GET_PRIV使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTMP_OS_NETDEV_GET_PRIV函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MBSS_VirtualIF_Close

/*
========================================================================
Routine Description:
    Close a virtual network interface.

Arguments:
    pDev           which WLAN network interface

Return Value:
    0: close successfully
    otherwise: close fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_Close(
	IN	PNET_DEV	pDev)
{
	PRTMP_ADAPTER pAd;
	INT BssId;

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_close\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
	if (BssId < 0)
    	    return -1;

	RTMP_OS_NETDEV_STOP_QUEUE(pDev);

	/* kick out all stas behind the Bss */
	MbssKickOutStas(pAd, BssId, REASON_DISASSOC_INACTIVE);

	pAd->ApCfg.MBSSID[BssId].bBcnSntReq = FALSE;
	APMakeAllBssBeacon(pAd);
	APUpdateAllBeaconFrame(pAd);


	VIRTUAL_IF_DOWN(pAd);

	RT_MOD_DEC_USE_COUNT();
	return 0;
} /* End of MBSS_VirtualIF_Close */
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:43，代码来源:ap_mbss.c


示例2: CFG80211_VirtualIF_Close

static INT CFG80211_VirtualIF_Close(PNET_DEV dev_p)
{
	VOID *pAdSrc;

	pAdSrc = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAdSrc);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;

#ifdef RT_CFG80211_P2P_SUPPORT
	if (dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_P2P_CLIENT)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_VirtualIF_Close\n"));
		CFG80211OS_ScanEnd(pAd->pCfg80211_CB, TRUE);
		RT_MOD_DEC_USE_COUNT();
		return ApCli_Close(pAd, dev_p);
	}
#endif /* RT_CFG80211_P2P_SUPPORT */
	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	RTMP_OS_NETDEV_STOP_QUEUE(dev_p);
	
	if (netif_carrier_ok(dev_p))
		netif_carrier_off(dev_p);
	else
		AsicDisableSync(pAd);

	//VIRTUAL_IF_DOWN(pAd);

	RT_MOD_DEC_USE_COUNT();
	return 0;
}
开发者ID:Brainiarc7，项目名称:mtk-wifi-gpl，代码行数:31，代码来源:cfg80211_inf.c


示例3: CFG80211_VirtualIF_Close

static INT CFG80211_VirtualIF_Close(struct net_device *dev_p)
{
	struct rtmp_adapter *pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	RTMP_OS_NETDEV_STOP_QUEUE(dev_p);

	if (netif_carrier_ok(dev_p))
		netif_carrier_off(dev_p);
#ifdef CONFIG_STA_SUPPORT
	if (INFRA_ON(pAd))
		AsicEnableBssSync(pAd);

	else if (ADHOC_ON(pAd))
		AsicEnableIbssSync(pAd);
#else
	else
		AsicDisableSync(pAd);
#endif

	//VIRTUAL_IF_DOWN(pAd);

	RT_MOD_DEC_USE_COUNT();
	return 0;
}
开发者ID:ulli-kroll，项目名称:mt7612u，代码行数:29，代码来源:cfg80211_inf.c


示例4: CFG80211_VirtualIF_Open

static INT CFG80211_VirtualIF_Open(PNET_DEV dev_p)
{
	VOID *pAdSrc;
	
	pAdSrc = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAdSrc);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
	
	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %d,%s\n", __FUNCTION__, dev_p->ifindex, 
						RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	//if (VIRTUAL_IF_UP(pAd) != 0)
	//	return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	if ((dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_P2P_CLIENT) 
#ifdef CFG80211_MULTI_STA	
		|| (dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_STATION)
#endif /* CFG80211_MULTI_STA */		
	   )
	{
		DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_VirtualIF_Open\n"));
		pAd->flg_apcli_init = TRUE;
		ApCli_Open(pAd, dev_p);
		return 0;
	}

	RTMP_OS_NETDEV_START_QUEUE(dev_p);
	DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	return 0;
}
开发者ID:eager7，项目名称:linux-kernel，代码行数:34，代码来源:cfg80211_inf.c


示例5: rt2860_suspend

static int rt2860_suspend(
	struct pci_dev *pci_dev,
	pm_message_t state)
{
	struct net_device *net_dev = pci_get_drvdata(pci_dev);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)NULL;
	INT32 retval = 0;


	DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_suspend()\n"));

	if (net_dev == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("net_dev == NULL!\n"));
	}
	else
	{
		pAd = (PRTMP_ADAPTER)RTMP_OS_NETDEV_GET_PRIV(net_dev);

		/* we can not use IFF_UP because ra0 down but ra1 up */
		/* and 1 suspend/resume function for 1 module, not for each interface */
		/* so Linux will call suspend/resume function once */
		if (VIRTUAL_IF_NUM(pAd) > 0)
		{
			// avoid users do suspend after interface is down

			// stop interface
			netif_carrier_off(net_dev);
			netif_stop_queue(net_dev);

			// mark device as removed from system and therefore no longer available
			netif_device_detach(net_dev);

			// mark halt flag
			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);

			// take down the device
			rt28xx_close((PNET_DEV)net_dev);

			RT_MOD_DEC_USE_COUNT();
		}
	}

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
	// reference to http://vovo2000.com/type-lab/linux/kernel-api/linux-kernel-api.html
	// enable device to generate PME# when suspended
	// pci_choose_state(): Choose the power state of a PCI device to be suspended
	retval = pci_enable_wake(pci_dev, pci_choose_state(pci_dev, state), 1);
	// save the PCI configuration space of a device before suspending
	pci_save_state(pci_dev);
	// disable PCI device after use
	pci_disable_device(pci_dev);

	retval = pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
#endif

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_suspend()\n"));
	return retval;
}
开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:60，代码来源:pci_main_dev.c


示例6: ApCli_VirtualIF_Close

/*
========================================================================
Routine Description:
    Close a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: close successfully
    otherwise: close fail

Note:
========================================================================
*/
INT ApCli_VirtualIF_Close(
	IN	PNET_DEV	dev_p)
{
	UCHAR ifIndex;
	PRTMP_ADAPTER pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	for (ifIndex = 0; ifIndex < MAX_APCLI_NUM; ifIndex++)
	{
		if (pAd->ApCfg.ApCliTab[ifIndex].dev == dev_p)
		{
			RTMP_OS_NETDEV_STOP_QUEUE(dev_p);
			
			// send disconnect-req to sta State Machine.
			if (pAd->ApCfg.ApCliTab[ifIndex].Enable)
			{
				MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_DISCONNECT_REQ, 0, NULL, ifIndex);
				RTMP_MLME_HANDLER(pAd);
				DBGPRINT(RT_DEBUG_TRACE, ("(%s) ApCli interface[%d] startdown.\n", __FUNCTION__, ifIndex));
			}
			break;
		}
	}

	VIRTUAL_IF_DOWN(pAd);

	RT_MOD_DEC_USE_COUNT();

	return 0;
} /* End of ApCli_VirtualIF_Close */
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:49，代码来源:ap_apcli_inf.c


示例7: RTMP_OS_NETDEV_GET_PRIV

struct iw_statistics *rt73_get_wireless_stats(
	IN  struct net_device *net_dev)
{
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)  RTMP_OS_NETDEV_GET_PRIV(net_dev);

	DBGPRINT(RT_DEBUG_TRACE, "rt73_get_wireless_stats --->\n");

	// TODO: All elements are zero before be implemented

	pAd->iw_stats.status = 0;   // Status - device dependent for now

	pAd->iw_stats.qual.qual = pAd->Mlme.ChannelQuality; // link quality (%retries, SNR, %missed beacons or better...)
#ifdef RTMP_EMBEDDED
	pAd->iw_stats.qual.level = rt_abs(pAd->PortCfg.LastRssi);   // signal level (dBm)
#else
	pAd->iw_stats.qual.level = abs(pAd->PortCfg.LastRssi);      // signal level (dBm)
#endif
	pAd->iw_stats.qual.level += 256 - pAd->BbpRssiToDbmDelta;

	pAd->iw_stats.qual.noise = (pAd->BbpWriteLatch[17] > pAd->BbpTuning.R17UpperBoundG) ? pAd->BbpTuning.R17UpperBoundG : ((ULONG) pAd->BbpWriteLatch[17]); // noise level (dBm)
	pAd->iw_stats.qual.noise += 256 - 143;
	pAd->iw_stats.qual.updated = 1;     // Flags to know if updated

	pAd->iw_stats.discard.nwid = 0;     // Rx : Wrong nwid/essid
	pAd->iw_stats.miss.beacon = 0;      // Missed beacons/superframe

	// pAd->iw_stats.discard.code, discard.fragment, discard.retries, discard.misc has counted in other place

	return &pAd->iw_stats;
}
开发者ID:fgoncalves，项目名称:Ralink-Driver-Hack，代码行数:30，代码来源:rtmp_main.c


示例8: MBSS_Close

/*
========================================================================
Routine Description:
    Close a virtual network interface.

Arguments:
    pDev           which WLAN network interface

Return Value:
    0: close successfully
    otherwise: close fail

Note:
========================================================================
*/
INT MBSS_Close(PNET_DEV pDev)
{
	PRTMP_ADAPTER pAd;
	INT BssId;


	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
    if (BssId < 0)
        return -1;

	RTMP_OS_NETDEV_STOP_QUEUE(pDev);

	/* kick out all stas behind the Bss */
	MbssKickOutStas(pAd, BssId, REASON_DISASSOC_INACTIVE);

	pAd->ApCfg.MBSSID[BssId].bBcnSntReq = FALSE;

	APMakeAllBssBeacon(pAd);
	APUpdateAllBeaconFrame(pAd);

#ifdef MESH_SUPPORT
	MeshMakeBeacon(pAd, MESH_BEACON_IDX(pAd));
	MeshUpdateBeaconFrame(pAd, MESH_BEACON_IDX(pAd));
#endif /* MESH_SUPPORT */
	return 0;
}
开发者ID:vm3vuy，项目名称:my-local-repository，代码行数:42，代码来源:ap_mbss.c


示例9: MBSS_VirtualIF_Open

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
	pDev			which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_Open(
	IN	PNET_DEV	pDev)
{
	PRTMP_ADAPTER pAd;
	INT BssId;

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
    if (BssId < 0)
        return -1;
    
    pAd->ApCfg.MBSSID[BssId].bBcnSntReq = TRUE;

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(pDev);

	return 0;
} /* End of MBSS_VirtualIF_Open */
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:40，代码来源:ap_mbss.c


示例10: rt28xx_ioctl

INT rt28xx_ioctl(
	IN	PNET_DEV	net_dev,
	IN	OUT	struct ifreq	*rq,
	IN	INT					cmd)
{
	RTMP_ADAPTER	*pAd = NULL;
	INT				ret = 0;

	pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);
	if (pAd == NULL)
	{
		/* if 1st open fail, pAd will be free;
		   So the net_dev->priv will be NULL in 2rd open */
		return -ENETDOWN;
	}


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
	}
#endif // CONFIG_STA_SUPPORT //

	return ret;
}
开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:26，代码来源:rt_main_dev.c


示例11: P2P_VirtualIF_Open

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
int P2P_VirtualIF_Open(
    IN PNET_DEV		dev_p)
{
    VOID *pAd;
    /*PMULTISSID_STRUCT	pMbss; */

    pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
    ASSERT(pAd);

    DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

    if (RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_OPEN_PRE, 0,
                             dev_p, 0) != NDIS_STATUS_SUCCESS)
        return -1;

    if (VIRTUAL_IF_UP(pAd) != 0)
        return -1;

    /* increase MODULE use count */
    RT_MOD_INC_USE_COUNT();

    RTMP_OS_NETDEV_START_QUEUE(dev_p);

    if (RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_OPEN_POST, 0,
                             dev_p, 0) != NDIS_STATUS_SUCCESS)
        return -1;

    DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

    return 0;
}
开发者ID:vision8520，项目名称:kernel-amlogic-mx，代码行数:46，代码来源:p2p_inf.c


示例12: ApCli_VirtualIF_Open

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT ApCli_VirtualIF_Open(
	IN PNET_DEV		dev_p)
{
	UCHAR ifIndex;
	PRTMP_ADAPTER pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();

	for (ifIndex = 0; ifIndex < MAX_APCLI_NUM; ifIndex++)
	{
		if (pAd->ApCfg.ApCliTab[ifIndex].dev == dev_p)
		{
			RTMP_OS_NETDEV_START_QUEUE(dev_p);
			ApCliIfUp(pAd);
		}
	}

	return 0;
} /* End of ApCli_VirtualIF_Open */
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:43，代码来源:ap_apcli_inf.c


示例13: MBSS_VirtualIF_PacketSend

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
	pPktSrc			points to our adapter
	pDev			which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_PacketSend(
	IN PNDIS_PACKET		pPktSrc, 
	IN PNET_DEV		pDev)
{
	RTMP_ADAPTER     *pAd;
	MULTISSID_STRUCT *pMbss;
	PNDIS_PACKET     pPkt = (PNDIS_PACKET)pPktSrc;
	INT              IdBss;

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	ASSERT(pAd);

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
	{
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}
#endif // RALINK_ATE //

	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))          ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
	{
		/* wlan is scanning/disabled/reset */
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}

	if(!(RTMP_OS_NETDEV_STATE_RUNNING(pDev)))
	{
		/* the interface is down */
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}

	/* 0 is main BSS, dont handle it here */
	/* FIRST_MBSSID = 1 */
	pMbss = pAd->ApCfg.MBSSID;

	for(IdBss=FIRST_MBSSID; IdBss<pAd->ApCfg.BssidNum; IdBss++)
	{
		/* find the device in our MBSS list */
		if (pMbss[IdBss].MSSIDDev == pDev)
		{
			NdisZeroMemory((PUCHAR)&(RTPKT_TO_OSPKT(pPktSrc))->cb[CB_OFF], 15);
			RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, IdBss);
//			SET_OS_PKT_NETDEV(pPktSrc, pDev); /* MBSS used original interface for TX */
			
			/* transmit the packet */
			return rt28xx_packet_xmit(pPktSrc);
		}
	}

	/* can not find the BSS so discard the packet */
	RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);

	return 0;
} /* End of MBSS_VirtualIF_PacketSend */
开发者ID:schidler，项目名称:flyzjhz-rt-n56u，代码行数:75，代码来源:ap_mbss.c


示例14: MBSS_PacketSend

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
	pPktSrc			points to our adapter
	pDev			which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
int MBSS_PacketSend(
	IN	PNDIS_PACKET				pPktSrc, 
	IN	PNET_DEV					pDev,
	IN	RTMP_NET_PACKET_TRANSMIT	Func)
{
    RTMP_ADAPTER     *pAd;
    MULTISSID_STRUCT *pMbss;
    PNDIS_PACKET     pPkt = (PNDIS_PACKET)pPktSrc;
    int              IdBss;


	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	ASSERT(pAd);

#ifdef RALINK_ATE
    if (ATE_ON(pAd))
    {
        RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
        return 0;
    }
#endif /* RALINK_ATE */

	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))          ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
	{
		/* wlan is scanning/disabled/reset */
		RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);
		return 0;
	}


    /* 0 is main BSS, dont handle it here */
    /* FIRST_MBSSID = 1 */
    pMbss = pAd->ApCfg.MBSSID;

    for(IdBss=FIRST_MBSSID; IdBss<pAd->ApCfg.BssidNum; IdBss++)
    {
	/* find the device in our MBSS list */
	if (pMbss[IdBss].MSSIDDev == pDev)
	{
/*			NdisZeroMemory((PUCHAR)&(RTPKT_TO_OSPKT(pPktSrc))->cb[CB_OFF], 15); */
			NdisZeroMemory((PUCHAR)(GET_OS_PKT_CB(pPktSrc) + CB_OFF), 15);
            RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, IdBss);
/*			SET_OS_PKT_NETDEV(pPktSrc, pDev); */
		 

            /* transmit the packet */
            return Func(pPktSrc);
		}
	}

    /* can not find the BSS so discard the packet */
	RELEASE_NDIS_PACKET(pAd, pPkt, NDIS_STATUS_FAILURE);

    return 0;
}
开发者ID:derekcentrico，项目名称:m6.kernel.3.x，代码行数:73，代码来源:ap_mbss.c


示例15: rt73_ethtool_get_link

static uint32 rt73_ethtool_get_link(struct net_device *dev)
{
	RTMP_ADAPTER *pAd;

	ASSERT((dev));
	pAd = (PRTMP_ADAPTER) RTMP_OS_NETDEV_GET_PRIV(dev);

	//We return true if we already associated to some AP.
	return(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED));
}
开发者ID:fgoncalves，项目名称:Ralink-Driver-Hack，代码行数:10，代码来源:rtmp_main.c


示例16: rt73_get_drvinfo

static void
rt73_get_drvinfo(struct net_device *net_dev,
        struct ethtool_drvinfo *drvinfo)
{
        PRTMP_ADAPTER   pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);

        strcpy(drvinfo->driver, NIC_DEVICE_NAME);
        strcpy(drvinfo->version, DRIVER_VERSION);
		
		snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d(%d)", pAd->FirmwareVersion, pAd->EepromVersion);
		usb_make_path(pAd->pUsb_Dev, drvinfo->bus_info, sizeof(drvinfo->bus_info));
}
开发者ID:fgoncalves，项目名称:Ralink-Driver-Hack，代码行数:12，代码来源:rtmp_main.c


示例17: priv_cmd_get_p2p_dev_addr

static INT priv_cmd_get_p2p_dev_addr(PNET_DEV net_dev, PCHAR command, INT total_len)
{
	VOID *pAdSrc;	
	pAdSrc = RTMP_OS_NETDEV_GET_PRIV(net_dev);
	ASSERT(pAdSrc);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
	INT bytes_written = 0;
	
	COPY_MAC_ADDR(command, pAd->cfg80211_ctrl.P2PCurrentAddress, MAC_ADDR_LEN);
	bytes_written = MAC_ADDR_LEN;
	
	return bytes_written;
}
开发者ID:23171580，项目名称:ralink，代码行数:13，代码来源:android_priv_cmd.c


示例18: MBSS_Open

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
	pDev			which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT MBSS_Open(PNET_DEV pDev)
{
	PRTMP_ADAPTER pAd;
	INT BssId;

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
	if (BssId < 0)
		return -1;
    
	pAd->ApCfg.MBSSID[BssId].bBcnSntReq = TRUE;
		return 0;
}
开发者ID:Brainiarc7，项目名称:mtk-wifi-gpl，代码行数:28，代码来源:ap_mbss.c


示例19: rt73_get_regs

static void
rt73_get_regs(struct net_device *net_dev,
        struct ethtool_regs *regs, void *data)
{
	PRTMP_ADAPTER   pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);
	unsigned int counter;

	regs->len = CSR_REG_SIZE;

	for (counter = 0; counter < CSR_REG_SIZE; counter += sizeof(UINT32)) {
		RTUSBReadMACRegister(pAd, CSR_REG_BASE + counter, (PULONG)data);
		data += sizeof(UINT32);
	}
}
开发者ID:fgoncalves，项目名称:Ralink-Driver-Hack，代码行数:14，代码来源:rtmp_main.c


示例20: WDS_PacketSend

int WDS_PacketSend(
	IN	PNDIS_PACKET				pSkb, 
	IN	PNET_DEV					dev,
	IN	RTMP_NET_PACKET_TRANSMIT	Func)
{
	UCHAR i;
	RTMP_ADAPTER *pAd;
	PNDIS_PACKET pPacket = (PNDIS_PACKET) pSkb;

	pAd = (PRTMP_ADAPTER) RTMP_OS_NETDEV_GET_PRIV(dev);


#ifdef RALINK_ATE
	if (ATE_ON(pAd))
	{
		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
		return 0;
	}
#endif /* RALINK_ATE */

	if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))          ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
	{
		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
		return 0;
	}
	
	if (!(RTMP_OS_NETDEV_STATE_RUNNING(dev)))
	{
		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
		return 0;
	}

	for (i = 0; i < MAX_WDS_ENTRY; i++)
	{
		if (ValidWdsEntry(pAd, i) && (pAd->WdsTab.WdsEntry[i].dev == dev))
		{
			RTMP_SET_PACKET_NET_DEVICE_WDS(pSkb, i);
			SET_OS_PKT_NETDEV(pSkb, pAd->net_dev);

			return Func(pSkb);
		}
	}

	
	RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);

	return 0;
}
开发者ID:23171580，项目名称:ralink，代码行数:50，代码来源:ap_wds.c



注：本文中的RTMP_OS_NETDEV_GET_PRIV函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTMP_SEM_LOCK函数代码示例发布时间：2022-05-30
下一篇：
C++ RTMP_OS_NETDEV_GET_DEVNAME函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap