• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTMP_IO_READ32函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTMP_IO_READ32函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMP_IO_READ32函数的具体用法？C++ RTMP_IO_READ32怎么用？C++ RTMP_IO_READ32使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTMP_IO_READ32函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: EWDS

static inline VOID EWDS(
	IN PRTMP_ADAPTER	pAd)
{
	UINT32	x;

	// reset bits and set EECS
	RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
	x &= ~(EEDI | EEDO | EESK);
	x |= EECS;
	RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);

	// kick a pulse
	RaiseClock(pAd, &x);
	LowerClock(pAd, &x);

	// output the read_opcode and six pulse in that order    
	ShiftOutBits(pAd, EEPROM_EWDS_OPCODE, 5);
	ShiftOutBits(pAd, 0, 6);

	EEpromCleanup(pAd);    
}
开发者ID:esironal，项目名称:mywdtvlive，代码行数:21，代码来源:ee_prom.c


示例2: WaitForAsicReady

BOOLEAN WaitForAsicReady(RTMP_ADAPTER *pAd)
{
	UINT32 mac_val = 0, reg = MAC_CSR0;
	int idx = 0;

	do {
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
			return FALSE;

		RTMP_IO_READ32(pAd, reg, &mac_val);
		if ((mac_val != 0x00) && (mac_val != 0xFFFFFFFF))
			return TRUE;

		RtmpOsMsDelay(5);
	} while (idx++ < 500);

	DBGPRINT(RT_DEBUG_ERROR, ("%s(0x%x):AsicNotReady!\n", 
			__FUNCTION__, mac_val));

	return FALSE;
}
开发者ID:BenMueller，项目名称:netgear-a6210-driver-dkms，代码行数:21，代码来源:rtmp_chip.c


示例3: RTMPHandleMgmtRingDmaDoneInterrupt

/*
	========================================================================

	Routine Description:
		Process MGMT ring DMA done interrupt, running in DPC level

	Arguments:
		pAd	Pointer to our adapter

	Return Value:
		None

	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
void RTMPHandleMgmtRingDmaDoneInterrupt(struct rt_rtmp_adapter *pAd)
{
	struct rt_txd * pTxD;
	void *pPacket;
/*      int              i; */
	u8 FREE = 0;
	struct rt_rtmp_mgmt_ring *pMgmtRing = &pAd->MgmtRing;

	NdisAcquireSpinLock(&pAd->MgmtRingLock);

	RTMP_IO_READ32(pAd, TX_MGMTDTX_IDX, &pMgmtRing->TxDmaIdx);
	while (pMgmtRing->TxSwFreeIdx != pMgmtRing->TxDmaIdx) {
		FREE++;
		pTxD =
		    (struct rt_txd *) (pMgmtRing->Cell[pAd->MgmtRing.TxSwFreeIdx].
				  AllocVa);
		pTxD->DMADONE = 0;
		pPacket = pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNdisPacket;

		if (pPacket) {
			PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0,
					 PCI_DMA_TODEVICE);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
		}
		pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNdisPacket = NULL;

		pPacket =
		    pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNextNdisPacket;
		if (pPacket) {
			PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1,
					 PCI_DMA_TODEVICE);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
		}
		pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNextNdisPacket = NULL;
		INC_RING_INDEX(pMgmtRing->TxSwFreeIdx, MGMT_RING_SIZE);

	}
	NdisReleaseSpinLock(&pAd->MgmtRingLock);

}
开发者ID:AbheekG，项目名称:XIA-for-Linux，代码行数:58，代码来源:cmm_data_pci.c


示例4: Show_LedCfg_Proc

INT Show_LedCfg_Proc(
	IN PRTMP_ADAPTER pAd,
	IN PSTRING arg)
{
	LED_CFG_T macLedCfg;
	ULED_PARAMETER *pLedParameter;
	
	pLedParameter = &pAd->LedCntl.SWMCULedCntl.LedParameter;

	printk("LedAMode_RadioOnLinkA=%d\n", pLedParameter->LedAgCfg.field.LedAMode_RadioOnLinkA);
	printk("LedGMode_RadioOnLinkA=%d\n", pLedParameter->LedAgCfg.field.LedGMode_RadioOnLinkA);
	printk("LedAMode_RadioOnLinkG=%d\n", pLedParameter->LedAgCfg.field.LedAMode_RadioOnLinkG);
	printk("LedGMode_RadioOnLinkG=%d\n", pLedParameter->LedAgCfg.field.LedGMode_RadioOnLinkG);
	printk("LedAMode_RadioOnLinkDown=%d\n", pLedParameter->LedAgCfg.field.LedAMode_RadioOnLinkDown);
	printk("LedGMode_RadioOnLinkDown=%d\n", pLedParameter->LedAgCfg.field.LedGMode_RadioOnLinkDown);
	printk("LedAMode_RadioOff=%d\n", pLedParameter->LedAgCfg.field.LedAMode_RadioOff);
	printk("LedGMode_RadioOff=%d\n", pLedParameter->LedAgCfg.field.LedGMode_RadioOff);

	printk("LedActModeNoTx_RadioOnLinkA=%d\n", pLedParameter->LedActCfg.field.LedActModeNoTx_RadioOnLinkA);
	printk("LedActMode_RadioOnLinkA=%d\n", pLedParameter->LedActCfg.field.LedActMode_RadioOnLinkA);
	printk("LedActModeNoTx_RadioOnLinkG=%d\n", pLedParameter->LedActCfg.field.LedActModeNoTx_RadioOnLinkG);
	printk("LedActMode_RadioOnLinkG=%d\n", pLedParameter->LedActCfg.field.LedActMode_RadioOnLinkG);
	printk("LedActModeNoTx_RadioOnLinkDown=%d\n", pLedParameter->LedActCfg.field.LedActModeNoTx_RadioOnLinkDown);
	printk("LedActMode_RadioOnLinkDown=%d\n", pLedParameter->LedActCfg.field.LedActMode_RadioOnLinkDown);
	printk("LedActModeNoTx_RadioOff=%d\n", pLedParameter->LedActCfg.field.LedActModeNoTx_RadioOff);
	printk("LedActMode_RadioOff=%d\n", pLedParameter->LedActCfg.field.LedActMode_RadioOff);

	RTMP_IO_READ32(pAd, MAC_LED_CFG, &macLedCfg.word);
	
	printk("LED_CFG = %x\n\n", macLedCfg.word);
	printk("LED_ON_TIME = %d\n", macLedCfg.field.LED_ON_TIME);
	printk("LED_OFF_TIME = %d\n", macLedCfg.field.LED_OFF_TIME);
	printk("SLOW_BLK_TIME = %d\n", macLedCfg.field.SLOW_BLK_TIME);
	printk("R_LED_MODE (A) = %d\n", macLedCfg.field.R_LED_MODE);
	printk("G_LED_MODE (ACT) = %d\n", macLedCfg.field.G_LED_MODE);
	printk("Y_LED_MODE (A) = %d\n", macLedCfg.field.Y_LED_MODE);
	printk("LED_POL = %d\n", macLedCfg.field.LED_POL);

	return TRUE;
}
开发者ID:2812015651，项目名称:cuckoo，代码行数:40，代码来源:rt_led.c


示例5: mt7628_init_mac_cr

static VOID mt7628_init_mac_cr(RTMP_ADAPTER *pAd)
{
	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_OFF, ("%s()-->\n", __FUNCTION__));

	// enable MAC2MAC mode
#ifdef MT7628_FPGA
	UINT32 mac_val;
	RTMP_IO_READ32(pAd, RMAC_MISC, &mac_val);
	mac_val |= BIT18;
	RTMP_IO_WRITE32(pAd, RMAC_MISC, mac_val);

	mac_val = 0x00d700d7;
	RTMP_IO_WRITE32(pAd, TMAC_CDTR, mac_val);
	mac_val = 0x00d700d7;
	RTMP_IO_WRITE32(pAd, TMAC_ODTR, mac_val);
#endif /* MT7628_FPGA */

	/* TxS Setting */
	InitTxSTypeTable(pAd);
	MtAsicSetTxSClassifyFilter(pAd, TXS2HOST, TXS2H_QID1, TXS2HOST_AGGNUMS, 0x00);
	MtAsicSetTxSClassifyFilter(pAd, TXS2MCU, TXS2M_QID0, TXS2MCU_AGGNUMS, 0x00);
}
开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:22，代码来源:mt7628.c


示例6: RT30xxWriteRFRegister

/*
	========================================================================
	
	Routine Description: Write RT30xx RF register through MAC

	Arguments:

	Return Value:

	IRQL = 
	
	Note:
	
	========================================================================
*/
NDIS_STATUS RT30xxWriteRFRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			regID,
	IN	UCHAR			value)
{
	RF_CSR_CFG_STRUC	rfcsr = { { 0 } };
	UINT				i = 0;



	{
		ASSERT((regID <= pAd->chipCap.MaxNumOfRfId)); /* R0~R31 or R63*/

		do
		{
			RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);

			if (!rfcsr.field.RF_CSR_KICK)
				break;
			i++;
		}
		while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

		if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
		{
			DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
			return STATUS_UNSUCCESSFUL;
		}

		rfcsr.field.RF_CSR_WR = 1;
		rfcsr.field.RF_CSR_KICK = 1;
		rfcsr.field.TESTCSR_RFACC_REGNUM = regID; /* R0~R31*/
		rfcsr.field.RF_CSR_DATA = value;
		
		RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
	}

	return NDIS_STATUS_SUCCESS;
}
开发者ID:celeduc，项目名称:rt3572sta，代码行数:54，代码来源:rt_rf.c


示例7: rf_csr_poll_idle

static inline BOOLEAN rf_csr_poll_idle(RTMP_ADAPTER *pAd, UINT32 *rfcsr)
{
    RF_CSR_CFG_STRUC *csr_val;
    BOOLEAN idle = BUSY;
    INT i = 0;

    do
    {
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
            break;

        RTMP_IO_READ32(pAd, RF_CSR_CFG, rfcsr);

        csr_val = (RF_CSR_CFG_STRUC *)rfcsr;
#ifdef RT6352
        if (IS_RT6352(pAd))
            idle = csr_val->bank_6352.RF_CSR_KICK;
        else
#endif /* RT6352 */
#ifdef RT65xx
            if (IS_RT65XX(pAd))
                idle = csr_val->bank_65xx.RF_CSR_KICK;
            else
#endif /* RT65xx */
                idle = csr_val->non_bank.RF_CSR_KICK;

        if (idle == IDLE)
            break;

        i++;
    } while (i < MAX_BUSY_COUNT);

    if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
    {
        DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed(cnt=%d)!\n", i));
    }

    return idle;
}
开发者ID:vm3vuy，项目名称:my-local-repository，代码行数:39，代码来源:rlt_rf.c


示例8: CheckSkipTX

VOID CheckSkipTX(
	RTMP_ADAPTER *pAd,
	MAC_TABLE_ENTRY *pEntry)
{
	struct wtbl_entry tb_entry;
	union WTBL_1_DW3 *dw3 = (union WTBL_1_DW3 *)&tb_entry.wtbl_1.wtbl_1_d3.word;
	STA_TR_ENTRY *tr_entry;
	CHAR isChange = FALSE;

	NdisZeroMemory(&tb_entry, sizeof(tb_entry));
	if (mt_wtbl_get_entry234(pAd, pEntry->wcid, &tb_entry) == FALSE) 
	{
		DBGPRINT(RT_DEBUG_INFO | DBG_FUNC_PS, ("%s():Cannot found WTBL2/3/4\n",__FUNCTION__));
		return;
	}
	tr_entry = &pAd->MacTab.tr_entry[pEntry->wcid];

	RTMP_IO_READ32(pAd, tb_entry.wtbl_addr[0]+12, &dw3->word);
	if ((tr_entry->ps_state != APPS_RETRIEVE_START_PS) && (dw3->field.skip_tx == 1))
	{
		dw3->field.skip_tx = 0;
		isChange = TRUE;
	}

	if ((tr_entry->ps_state < APPS_RETRIEVE_DONE) && (dw3->field.du_i_psm == 1))
	{
		dw3->field.du_i_psm = 0;
		dw3->field.i_psm = 0;
		/* also sync pEntry flag*/
		pEntry->i_psm = 0 ;
		isChange = TRUE;
	}

	if (isChange == TRUE) {
		pAd->SkipTxRCount++;		
		RTMP_IO_WRITE32(pAd, tb_entry.wtbl_addr[0]+12, dw3->word);
	}
	return;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:39，代码来源:mt_ps.c


示例9: RTMPInitPCIeDevice

/***************************************************************************
 *
 *	PCIe device initialization related procedures.
 *
 ***************************************************************************/
static void RTMPInitPCIeDevice(struct pci_dev *pci_dev, struct rt_rtmp_adapter *pAd)
{
	u16 device_id;
	struct os_cookie *pObj;

	pObj = (struct os_cookie *)pAd->OS_Cookie;
	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &device_id);
	device_id = le2cpu16(device_id);
	pObj->DeviceID = device_id;
	if (
#ifdef RT2860
		   (device_id == NIC2860_PCIe_DEVICE_ID) ||
		   (device_id == NIC2790_PCIe_DEVICE_ID) ||
		   (device_id == VEN_AWT_PCIe_DEVICE_ID) ||
#endif
#ifdef RT3090
		   (device_id == NIC3090_PCIe_DEVICE_ID) ||
		   (device_id == NIC3091_PCIe_DEVICE_ID) ||
		   (device_id == NIC3092_PCIe_DEVICE_ID) ||
#endif /* RT3090 // */
		   0) {
		u32 MacCsr0 = 0, Index = 0;
		do {
			RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);

			if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
				break;

			RTMPusecDelay(10);
		} while (Index++ < 100);

		/* Support advanced power save after 2892/2790. */
		/* MAC version at offset 0x1000 is 0x2872XXXX/0x2870XXXX(PCIe, USB, SDIO). */
		if ((MacCsr0 & 0xffff0000) != 0x28600000) {
			OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PCIE_DEVICE);
		}
	}
}
开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:43，代码来源:pci_main_dev.c


示例10: bbp_set_bw

INT bbp_set_bw(struct _RTMP_ADAPTER *pAd, UINT8 bw)
{
	INT result = FALSE;

	if (pAd->phy_op && pAd->phy_op->bbp_set_bw)
		result = pAd->phy_op->bbp_set_bw(pAd, bw);

	if (result == TRUE)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("%s(): Set PhyBW as %sHz.l\n",
				__FUNCTION__, get_bw_str(bw)));
	}

	// TODO: shiang-7603, revise following code
#ifdef MT_MAC
	if (pAd->chipCap.hif_type == HIF_MT) {
		UINT32 val;
		
		RTMP_IO_READ32(pAd, AGG_BWCR, &val);
		val &= (~0x0c);
		switch (bw)
		{
			case BW_20:
				val |= (0);
				break;
			case BW_40:
				val |= (0x1 << 2);
				break;
			case BW_80:
				val |= (0x2 << 2);
				break;
		}
		RTMP_IO_WRITE32(pAd, AGG_BWCR, val);
	}
#endif /* MT_MAC */

	return result;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:38，代码来源:phy.c


示例11: RTMPHandleRxCoherentInterrupt

VOID	RTMPHandleRxCoherentInterrupt(
	IN	PRTMP_ADAPTER	pAd)
{
	WPDMA_GLO_CFG_STRUC	GloCfg;

	if (pAd == NULL)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("====> pAd is NULL, return.\n"));
		return;
	}
	
	DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPHandleRxCoherentInterrupt \n"));
	
	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG , &GloCfg.word);

	GloCfg.field.EnTXWriteBackDDONE = 0;
	GloCfg.field.EnableRxDMA = 0;
	GloCfg.field.EnableTxDMA = 0;
	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);

	DBGPRINT_TX_RING(pAd, QID_AC_BE);
	DBGPRINT_TX_RING(pAd, QID_AC_BK);
	DBGPRINT_TX_RING(pAd, QID_AC_VI);
	DBGPRINT_TX_RING(pAd, QID_AC_VO);
	DBGPRINT_TX_RING(pAd, QID_MGMT);

	RTMPRingCleanUp(pAd, QID_AC_BE);
	RTMPRingCleanUp(pAd, QID_AC_BK);
	RTMPRingCleanUp(pAd, QID_AC_VI);
	RTMPRingCleanUp(pAd, QID_AC_VO);
	RTMPRingCleanUp(pAd, QID_HCCA);
	RTMPRingCleanUp(pAd, QID_MGMT);
	RTMPRingCleanUp(pAd, QID_RX);

	RTMPEnableRxTx(pAd);
	
	DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPHandleRxCoherentInterrupt \n"));
}
开发者ID:houzhenggang，项目名称:mt7688_mips_ecos，代码行数:38，代码来源:cmm_data_pci.c


示例12: RTMPInitPCIeDevice

/***************************************************************************
 *
 *	PCIe device initialization related procedures.
 *
 ***************************************************************************/
 static VOID RTMPInitPCIeDevice(
    IN  struct pci_dev   *pci_dev,
    IN PRTMP_ADAPTER     pAd)
{
	USHORT  device_id;
	POS_COOKIE pObj;

	pObj = (POS_COOKIE) pAd->OS_Cookie;
	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &device_id);
	device_id = le2cpu16(device_id);
	pObj->DeviceID = device_id;
	if (
#ifdef RT3090
		(device_id == NIC3090_PCIe_DEVICE_ID) ||
		(device_id == NIC3091_PCIe_DEVICE_ID) ||
		(device_id == NIC3092_PCIe_DEVICE_ID) ||
#endif // RT3090 //
		 0)
	{
		UINT32 MacCsr0 = 0, Index= 0;
		do
		{
			RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);

			if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
				break;

			RTMPusecDelay(10);
		} while (Index++ < 100);

		// Support advanced power save after 2892/2790.
		// MAC version at offset 0x1000 is 0x2872XXXX/0x2870XXXX(PCIe, USB, SDIO).
		if ((MacCsr0&0xffff0000) != 0x28600000)
		{
			OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PCIE_DEVICE);
		}
	}
}
开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:43，代码来源:pci_main_dev.c


示例13: rtmp_ee_prom_read16

// IRQL = PASSIVE_LEVEL
int rtmp_ee_prom_read16(
	IN PRTMP_ADAPTER	pAd,
	IN USHORT			Offset,
	OUT USHORT			*pValue)
{
	UINT32		x;
	USHORT		data;


	Offset /= 2;
	// reset bits and set EECS
	RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
	x &= ~(EEDI | EEDO | EESK);
	x |= EECS;
	RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);

	// patch can not access e-Fuse issue
	if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd) || IS_RT3593(pAd)))
	{
		// kick a pulse
		RaiseClock(pAd, &x);
		LowerClock(pAd, &x);
	}

	// output the read_opcode and register number in that order    
	ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
	ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);

	// Now read the data (16 bits) in from the selected EEPROM word
	data = ShiftInBits(pAd);

	EEpromCleanup(pAd);


	*pValue = data;

	return NDIS_STATUS_SUCCESS;
}
开发者ID:jhbsz，项目名称:ralink_2860xx，代码行数:39，代码来源:ee_prom.c


示例14: rtmp_mac_set_band

int rtmp_mac_set_band(RTMP_ADAPTER *pAd, int  band)
{
	UINT32 val, band_cfg;


	RTMP_IO_READ32(pAd, TX_BAND_CFG, &band_cfg);
	val = band_cfg & (~0x6);
	switch (band)
	{
		case BAND_5G:
			val |= 0x02;
			break;
		case BAND_24G:
		default:
			val |= 0x4;
			break;
	}

	if (val != band_cfg)
		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, val);

	return TRUE;
}
开发者ID:derekcentrico，项目名称:m6.kernel.3.x，代码行数:23，代码来源:rtmp_mac.c


示例15: AsicGetMacVersion

INT AsicGetMacVersion(
	IN RTMP_ADAPTER *pAd)
{
	UINT32 reg = MAC_CSR0;

#ifdef RT3290
	if (IS_RT3290(pAd))
		reg = 0x0;
#endif /* RT3290 */

	if (WaitForAsicReady(pAd) == TRUE)
	{
		RTMP_IO_READ32(pAd, reg, &pAd->MACVersion);
		DBGPRINT(RT_DEBUG_OFF, ("MACVersion[Ver:Rev]=0x%08x\n",
					pAd->MACVersion));
		return TRUE;
	}
	else
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s() failed!\n", __FUNCTION__));
		return FALSE;
	}
}
开发者ID:2421，项目名称:mt7601u_driver_linux，代码行数:23，代码来源:rtmp_chip.c


示例16: CFG80211DRV_DisableApInterface

static VOID CFG80211DRV_DisableApInterface(
        VOID                                            *pAdOrg)
{
	UINT32 Value;
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdOrg;
	pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE;

        /* Disable pre-tbtt interrupt */
        RTMP_IO_READ32(pAd, INT_TIMER_EN, &Value);
        Value &=0xe;
        RTMP_IO_WRITE32(pAd, INT_TIMER_EN, Value);

        if (!INFRA_ON(pAd))
        {
                /* Disable piggyback */
                RTMPSetPiggyBack(pAd, FALSE);
                AsicUpdateProtect(pAd, 0,  (ALLN_SETPROTECT|CCKSETPROTECT|OFDMSETPROTECT), TRUE, FALSE);

        }

        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
        {
                /*RTMP_ASIC_INTERRUPT_DISABLE(pAd); */
                AsicDisableSync(pAd);

#ifdef LED_CONTROL_SUPPORT
                /* Set LED */
                RTMPSetLED(pAd, LED_LINK_DOWN);
#endif /* LED_CONTROL_SUPPORT */
        }

#ifdef RTMP_MAC_USB
        /* For RT2870, we need to clear the beacon sync buffer. */
        RTUSBBssBeaconExit(pAd);
#endif /* RTMP_MAC_USB */
	
}
开发者ID:andyvand，项目名称:mt7601u-ap，代码行数:37，代码来源:cfg80211drv.c


示例17: rtmp_ac0_dma_done_tasklet

static void rtmp_ac0_dma_done_tasklet(unsigned long data)
{
	UINT32		irqsave;
	UINT32		irqMask;
	PRTMP_ADAPTER pAdapter = (PRTMP_ADAPTER) data;
    INT_SOURCE_CSR_STRUC	IntSource;

	/* device had been closed */
	if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_REMOVE_IN_PROGRESS)) {
		return;
	}


	IntSource.word = 0;
	IntSource.field.Ac0DmaDone = 1;

	RTMPHandleTxRingDmaDoneInterrupt(pAdapter, IntSource);
	
	RTMP_IRQ_LOCK(irqsave);

	/*
	 * double check to avoid rotting packet 
	 */

	if (pAdapter->Rtmp_Masked_Int & RTMP_MASK_INT_AC0_DMA_DONE) {	
		pAdapter->Rtmp_Masked_Int &= ~RTMP_MASK_INT_AC0_DMA_DONE;	
		tasklet_hi_schedule(&pAdapter->ac0_dma_done_task);
	} else {
		/* enable ac0 interrupt */
		RTMP_IO_READ32(pAdapter, INT_MASK_CSR,  &irqMask);
		RTMP_IO_WRITE32(pAdapter, INT_MASK_CSR,  irqMask & ~RTMP_MASK_INT_AC0_DMA_DONE);
		pAdapter->ac0_dma_done_running = FALSE;
	}
		
	RTMP_IRQ_UNLOCK(irqsave);
}
开发者ID:niubl，项目名称:camera_project，代码行数:36，代码来源:rtmp_task.c


示例18: RT30xx_ChipBBPAdjust

VOID RT30xx_ChipBBPAdjust(
    IN RTMP_ADAPTER            *pAd)
{
    UINT32 Value;
    UCHAR byteValue = 0;

    {
//        pAd->CommonCfg.BBPCurrentBW = BW_20;
//        pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
        
        /*  TX : control channel at lower */
        RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
        Value &= (~0x1);
        RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);

        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &byteValue);
        byteValue &= (~0x18);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, byteValue);
        
        /* 20 MHz bandwidth*/

        /* request by Gary 20070208*/
        /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, 0x30);*/
        /* request by Brian 20070306*/
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, 0x38);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x12);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x10);
    }
    
     /* request by Gary 20070208 for middle and long range G band*/
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, 0x2D);
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, 0x2D);
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, 0x2D);
    /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x2D);*/
}
开发者ID:gexueyuan，项目名称:Cygnoides，代码行数:36，代码来源:rt30xx.c


示例19: rtmp_mac_set_ctrlch

INT rtmp_mac_set_ctrlch(RTMP_ADAPTER *pAd, UINT8 extch)
{
	UINT32 val, band_cfg;

	RTMP_IO_READ32(pAd, TX_BAND_CFG, &band_cfg);
	val = band_cfg & (~0x1);
	switch (extch)
	{
		case EXTCHA_ABOVE:
			val &= (~0x1);
			break;
		case EXTCHA_BELOW:
			val |= (0x1);
			break;
		case EXTCHA_NONE:
			val &= (~0x1);
			break;
	}

	if (val != band_cfg)
		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, val);
	
	return TRUE;
}
开发者ID:Brainiarc7，项目名称:mtk-wifi-gpl，代码行数:24，代码来源:rtmp_mac.c


示例20: RT35xx_ChipSwitchChannel


//.........这里部分代码省略.........
				/* tx_lo1*/
				RT30xxWriteRFRegister(pAd, RF_R17, (UCHAR)0x23);

				/* tx_lo2*/
				RFValue = ((Channel <= 14) ? (0x93) : ((Channel <= 64) ? (0xb7) : ((Channel <= 128) ? (0x74) : (0x72))));
				RT30xxWriteRFRegister(pAd, RF_R19, (UCHAR)RFValue);

				/* rx_l01*/
				RFValue = ((Channel <= 14) ? (0xB3) : ((Channel <= 64) ? (0xF6) : ((Channel <= 128) ? (0xF4) : (0xF3))));
				RT30xxWriteRFRegister(pAd, RF_R20, (UCHAR)RFValue);

				/* pfd_delay*/
				RFValue = ((Channel <= 14) ? (0x15) : ((Channel <= 64) ? (0x3d) : ((Channel <= 128) ? (0x01) : (0x01))));
				RT30xxWriteRFRegister(pAd, RF_R25, (UCHAR)RFValue);

				/* rx_lo2*/
				if  (Channel <= 14)
					RT30xxWriteRFRegister(pAd, RF_R26, (UCHAR)0x85);
				else
					RT30xxWriteRFRegister(pAd, RF_R26, (UCHAR)0x87);

				/* ldo_rf_vc*/
				if  (Channel <= 14)
					RT30xxWriteRFRegister(pAd, RF_R27, (UCHAR)0x00);
				else
					RT30xxWriteRFRegister(pAd, RF_R27, (UCHAR)0x01);

				/* drv_cc*/
				if  (Channel <= 14)
					RT30xxWriteRFRegister(pAd, RF_R29, (UCHAR)0x9B);
				else
					RT30xxWriteRFRegister(pAd, RF_R29, (UCHAR)0x9F);

				RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
				if  (Channel <= 14)
					Value = ((Value & 0xFFFF7FFF) | 0x00000080);
				else
					Value = (Value & 0xFFFF7F7F);
				RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);

				/* Enable RF tuning, this must be in the last*/
				RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue);
				RFValue = RFValue | 0x1;
				RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue);

				RTMPusecDelay(2000);

				/* latch channel for future usage.*/
				pAd->LatchRfRegs.Channel = Channel;
				
				DBGPRINT(RT_DEBUG_TRACE, ("RT35xx: SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
					Channel, 
					pAd->RfIcType, 
					TxPwer,
					TxPwer2,
					pAd->Antenna.field.TxPath,
					FreqItems3572[index].N, 
					FreqItems3572[index].K, 
					FreqItems3572[index].R));
				break;
			}
		}
	}
	else
#endif /* RT35xx */
	{
开发者ID:celeduc，项目名称:rt3572sta，代码行数:67，代码来源:rt35xx.c



注：本文中的RTMP_IO_READ32函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTMP_IO_WRITE32函数代码示例发布时间：2022-05-30
下一篇：
C++ RTMP_INT_UNLOCK函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap