• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTC_SetTime函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTC_SetTime函数的典型用法代码示例。如果您正苦于以下问题：C++ RTC_SetTime函数的具体用法？C++ RTC_SetTime怎么用？C++ RTC_SetTime使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTC_SetTime函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: TM_RTC_SetDateTime

void TM_RTC_SetDateTime(TM_RTC_Time_t* data, TM_RTC_Format_t format) {	
	/* Fill time */
	RTC_TimeStruct.RTC_Hours = data->hours;
	RTC_TimeStruct.RTC_Minutes = data->minutes;
	RTC_TimeStruct.RTC_Seconds = data->seconds;
	/* Fill date */
	RTC_DateStruct.RTC_Date = data->date;
	RTC_DateStruct.RTC_Month = data->month;
	RTC_DateStruct.RTC_Year = data->year;
	RTC_DateStruct.RTC_WeekDay = data->day;
	
	/* Set the RTC time base to 1s and hours format to 24h */
	RTC_InitStruct.RTC_HourFormat = RTC_HourFormat_24;
	RTC_InitStruct.RTC_AsynchPrediv = uwAsynchPrediv;
	RTC_InitStruct.RTC_SynchPrediv = uwSynchPrediv;
	RTC_Init(&RTC_InitStruct);

	if (format == TM_RTC_Format_BCD) {
		RTC_SetTime(RTC_Format_BCD, &RTC_TimeStruct);
	} else {
		RTC_SetTime(RTC_Format_BIN, &RTC_TimeStruct);
	}
	
	if (format == TM_RTC_Format_BCD) {
		RTC_SetDate(RTC_Format_BCD, &RTC_DateStruct);
	} else {
		RTC_SetDate(RTC_Format_BIN, &RTC_DateStruct);
	}	
	
	if (TM_RTC_Status != RTC_STATUS_ZERO) {
		/* Write backup registers */
		RTC_WriteBackupRegister(RTC_STATUS_REG, RTC_STATUS_TIME_OK);
	}
}
开发者ID:Mars55，项目名称:stm32f429，代码行数:34，代码来源:tm_stm32f4_rtc.c


示例2: UB_RTC_SetClock

//--------------------------------------------------------------
// RTC setzen
// vor dem Aufruf muss die aktuelle Uhrzeit und das Datum
// in der Struktur "UB_RTC" gespeichert werden
// format : [RTC_DEC, RTC_HEX]
//--------------------------------------------------------------
void UB_RTC_SetClock(RTC_FORMAT_t format)
{
  // Check auf Min+Max
  if(UB_RTC.std>23) UB_RTC.std=23;
  if(UB_RTC.min>59) UB_RTC.min=59;
  if(UB_RTC.sek>59) UB_RTC.sek=59;

  if(UB_RTC.tag<1) UB_RTC.tag=1;
  if(UB_RTC.tag>31) UB_RTC.tag=31;
  if(UB_RTC.monat<1) UB_RTC.monat=1;
  if(UB_RTC.monat>12) UB_RTC.monat=12;
  if(UB_RTC.jahr>99) UB_RTC.jahr=99;
  if(UB_RTC.wotag<1) UB_RTC.wotag=1;
  if(UB_RTC.wotag>7) UB_RTC.wotag=7;

  // Zeit einstellen
  RTC_TimeStructure.RTC_Hours = UB_RTC.std;
  RTC_TimeStructure.RTC_Minutes = UB_RTC.min;
  RTC_TimeStructure.RTC_Seconds = UB_RTC.sek;
  if(format==RTC_DEC) {
    RTC_SetTime(RTC_Format_BIN, &RTC_TimeStructure);   
  }
  else {
    RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);
  }

  // Datum einstellen
  RTC_DateStructure.RTC_Date = UB_RTC.tag;
  RTC_DateStructure.RTC_Month = UB_RTC.monat;
  RTC_DateStructure.RTC_Year = UB_RTC.jahr;
  RTC_DateStructure.RTC_WeekDay = UB_RTC.wotag;
  if(format==RTC_DEC) {
    RTC_SetDate(RTC_Format_BIN, &RTC_DateStructure); 
  }
  else {
    RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure); 
  }

  // Sonstige Settings
  RTC_InitStructure.RTC_AsynchPrediv = 0x7F;
  RTC_InitStructure.RTC_SynchPrediv =  0xFF;
  RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
  RTC_Init(&RTC_InitStructure);  

  // Status-Register beschreiben
  // falls Settings vom User gemacht wurden
  if(UB_RTC.status!=RTC_UNDEFINED) {
    RTC_WriteBackupRegister(RTC_STATUS_REG, RTC_STATUS_TIME_OK); 
  }
}
开发者ID:Jinzuu，项目名称:wc_ws，代码行数:56，代码来源:stm32_ub_rtc.c


示例3: set_time

//设置时间
// RTC_H12_AM                     ((uint8_t)0x00)
// RTC_H12_PM                     ((uint8_t)0x40)
void set_time(	unsigned char year,
				unsigned char mounth,
				unsigned char day,
				unsigned char hour,
				unsigned char min,
				unsigned char sec,
				unsigned char week,
				unsigned char ampm)
{
	
	RTC_TimeTypeDef RTC_TimeStructure;
	RTC_DateTypeDef RTC_DateStructure;
	
	RTC_DateStructure.RTC_Year = year;
	RTC_DateStructure.RTC_Month = mounth;
	RTC_DateStructure.RTC_Date = day;
	RTC_DateStructure.RTC_WeekDay = week;
	//设置时间
	RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);
	
	
	RTC_TimeStructure.RTC_H12     = ampm;
	RTC_TimeStructure.RTC_Hours   = hour;
	RTC_TimeStructure.RTC_Minutes = min;
	RTC_TimeStructure.RTC_Seconds = sec; 
	RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);   

	RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F1);
}
开发者ID:big-big，项目名称:RD15002WV，代码行数:32，代码来源:bsp_rtc.c


示例4: main

/* start the main program */
void main() 
{
  
   unsigned char sec,min,hour,day,month,year;

  /* Initialize the lcd before displaying any thing on the lcd */
    LCD_Init(8,2,16);

  /* Initialize the RTC(ds1307) before reading or writing time/date */
    RTC_Init();


   /*##### Set the time and Date only once. Once the Time and Date is set, comment these lines
         and reflash the code. Else the time will be set every time the controller is reset*/
    RTC_SetTime(0x10,0x40,0x00);  //  10:40:20 am
    RTC_SetDate(0x01,0x01,0x15);  //  1st Jan 2015



   /* Display the Time and Date continuously */ 
   while(1)
    {
		LCD_GoToLine(1);
	   /* Read the Time from RTC(ds1307) */ 
        RTC_GetTime(&hour,&min,&sec);    
		
	   /* Read the Date from RTC(ds1307) */ 
       RTC_GetDate(&day,&month,&year);     		 
        
	   LCD_Printf("\n\rtime:%2x:%2x:%2x  \nDate:%2x/%2x/%2x",(uint16_t)hour,(uint16_t)min,(uint16_t)sec,(uint16_t)day,(uint16_t)month,(uint16_t)year);
	}		

  }
开发者ID:Amritach，项目名称:Code-Libraries，代码行数:34，代码来源:main.c


示例5: bsp_RTCSet

void bsp_RTCSet(uint8_t year, uint8_t month, uint8_t day, uint8_t hour, uint8_t minute, uint8_t second)
{
	RTC_TimeTypeDef RTC_TimeStructure;
	RTC_DateTypeDef RTC_DateStructure;
	RTC_TimeStructure.RTC_H12 = RTC_H12_AM;
	RTC_TimeStructure.RTC_Hours = hour; 
  RTC_TimeStructure.RTC_Minutes = minute;
  RTC_TimeStructure.RTC_Seconds = second;
	
	RTC_DateStructure.RTC_WeekDay = 0;
	RTC_DateStructure.RTC_Date = day;
	RTC_DateStructure.RTC_Month = month;
	RTC_DateStructure.RTC_Year = year;
	
	
	if(RTC_SetTime(RTC_Format_BIN, &RTC_TimeStructure) == ERROR)
	{
		//printf("\n\r>> !! RTC Set Time failed. !! <<\n\r");
	} 
	
	if(RTC_SetDate(RTC_Format_BIN, &RTC_DateStructure) == ERROR)
	{
		//printf("\n\r>> !! RTC Set Time failed. !! <<\n\r");
	} 
	
}
开发者ID:wwwqimo，项目名称:Cube_Sw，代码行数:26，代码来源:bsp_rtc.c


示例6: main

/* start the main program */
void main() 
{
   unsigned char sec,min,hour,day,month,year;

  /* Initilize the Uart before Transmiting/Reaceiving any data */
    UART_Init(9600);

  /* Initilize the RTC(ds1307) before reading or writing time/date */
    RTC_Init();

	UART_TxString(" Testing RTC ");
 /*##### Set the time and Date only once. Once the Time and Date is set, comment these lines
         and reflash the code. Else the time will be set every time the controller is reset*/
    RTC_SetTime(0x10,0x40,0x00);  //  10:40:20 am
    RTC_SetDate(0x01,0x01,0x15);  //  1st Jan 2015



   /* Display the Time and Date continuously */ 
   while(1)
    {
	   /* Read the Time from RTC(ds1307) */ 
        RTC_GetTime(&hour,&min,&sec);      
		
	    /* Read the Date from RTC(ds1307) */ 
        RTC_GetDate(&day,&month,&year);        
	 
        UART_Printf("\n\r the time is :%2x:%2x:%2x  \nDate:%2x/%2x/%2x",(uint16_t)hour,(uint16_t)min,(uint16_t)sec,(uint16_t)day,(uint16_t)month,(uint16_t)year);
	  }		

  }
开发者ID:Rajusr70，项目名称:AT89S52_Ultra_Development_Kit，代码行数:32，代码来源:main.c


示例7: time_main

void time_main(void *args) 
{
    char * datetime ;
    RTC_TimeTypeDef RTC_Time ;
    RTC_DateTypeDef RTC_Date ;
    int year ;
    if( args == NULL || ((func_args *)args)->argc == 1) {
        RTC_GetTime(RTC_Format_BIN, &RTC_Time) ;
        RTC_GetDate(RTC_Format_BIN, &RTC_Date) ;
        printf("Date: %d/%d/%d, Time: %02d:%02d:%02d\n", 
             RTC_Date.RTC_Month, RTC_Date.RTC_Date, RTC_Date.RTC_Year+2000,  
             RTC_Time.RTC_Hours,  RTC_Time.RTC_Minutes,  RTC_Time.RTC_Seconds) ;              
    } else if(((func_args *)args)->argc == 3 && 
              ((func_args *)args)->argv[1][0] == '-' && 
              ((func_args *)args)->argv[1][1] == 'd' ) {
        datetime = ((func_args *)args)->argv[2];
        sscanf(datetime, "%d/%d/%d", 
             (int *)&RTC_Date.RTC_Month, (int *)&RTC_Date.RTC_Date, &year) ;
        RTC_Date.RTC_Year = year - 2000 ;   
        RTC_Date.RTC_WeekDay = 0 ;
        RTC_SetDate(RTC_Format_BIN, &RTC_Date) ;        
    } else if(((func_args *)args)->argc == 3 && 
              ((func_args *)args)->argv[1][0] == '-' && 
              ((func_args *)args)->argv[1][1] == 't' ) {
        datetime = ((func_args *)args)->argv[2];
        sscanf(datetime, "%d:%d:%d",            
            (int *)&RTC_Time.RTC_Hours, 
            (int *)&RTC_Time.RTC_Minutes, 
            (int *)&RTC_Time.RTC_Seconds
        ) ;
        RTC_SetTime(RTC_Format_BIN, &RTC_Time) ;
    } else printf("Invalid argument\n") ; 
}
开发者ID:EvertYing，项目名称:cyassl，代码行数:33，代码来源:time-STM32F2xx.c


示例8: RTC_cfg

unsigned int RTC_cfg(void)
{
	unsigned int ret;
	RTC_DateTypeDef   RTC_DateStruct;
	RTC_TimeTypeDef   RTC_TimeStruct;
	
	ret = 0;

	if (RTC_ReadBackupRegister(RTC_BKP_DR1) != 0xA5A5)
	{
	  	ret = 1;
		
		/* Allow access to BKP Domain */
		PWR_BackupAccessCmd(ENABLE);
	 
		/* Reset Backup Domain */
		RTC_DeInit();
	 
		/* Enable LSE */
		RCC_LSEConfig(RCC_LSE_ON);
		
		/* Wait till LSE is ready */
		while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
		{}
	 
		/* Select LSE as RTC Clock Source */
		RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
	 
		/* Enable RTC Clock */
		RCC_RTCCLKCmd(ENABLE);
	 
		/* Wait for RTC registers synchronization */
		RTC_WaitForSynchro();
	 
		/* Adjust time */
		RTC_DateStruct.RTC_Year = 13;
		RTC_DateStruct.RTC_Month = 05;
		RTC_DateStruct.RTC_Date = 29;
		RTC_DateStruct.RTC_WeekDay = 3;
		RTC_TimeStruct.RTC_Hours = 11;
		RTC_TimeStruct.RTC_Minutes = 0;	
		RTC_TimeStruct.RTC_Seconds = 0;
		RTC_SetTime(RTC_Format_BIN, &RTC_TimeStruct);	
		RTC_SetDate(RTC_Format_BIN, &RTC_DateStruct);
			
		RTC_WriteBackupRegister(RTC_BKP_DR1, 0xA5A5);
	}
	else
	{
	
		/* Allow access to BKP Domain */
		PWR_BackupAccessCmd(ENABLE);

		/* Wait for RTC registers synchronization */
		RTC_WaitForSynchro();
		while (RTC_GetFlagStatus(RTC_FLAG_RSF) == RESET);
		
	}
	return ret;
}
开发者ID:ADTL，项目名称:AFGUI，代码行数:60，代码来源:hw_init.c


示例9: MicoRtcSetTime

/**
* This function will set MCU RTC time to a new value. Time value must be given in the format of
* the structure wiced_rtc_time_t
*
* @return    WICED_SUCCESS : on success.
* @return    WICED_ERROR   : if an error occurred with any step
*/
OSStatus MicoRtcSetTime(mico_rtc_time_t* time)
{
#ifdef MICO_ENABLE_MCU_RTC
  RTC_TimeTypeDef rtc_write_time;
  RTC_DateTypeDef rtc_write_date;
  bool    valid = false;
  
  MicoMcuPowerSaveConfig(false);
  
  MICO_VERIFY_TIME(time, valid);
  if( valid == false )
  {
    return kParamErr;
  }
  rtc_write_time.RTC_Seconds = time->sec;
  rtc_write_time.RTC_Minutes = time->min;
  rtc_write_time.RTC_Hours   = time->hr;
  rtc_write_date.RTC_WeekDay = time->weekday;
  rtc_write_date.RTC_Date    = time->date;
  rtc_write_date.RTC_Month   = time->month;
  rtc_write_date.RTC_Year    = time->year;
  
  
  RTC_SetTime( RTC_Format_BIN, &rtc_write_time );
  RTC_SetDate( RTC_Format_BIN, &rtc_write_date );
  
  MicoMcuPowerSaveConfig(true);
  return kNoErr;
#else /* #ifdef MICO_ENABLE_MCU_RTC */
  UNUSED_PARAMETER(time);
  return kUnsupportedErr;
#endif /* #ifdef MICO_ENABLE_MCU_RTC */
}
开发者ID:yantrabuddhi，项目名称:bootlaoder_EMW3165，代码行数:40，代码来源:MicoDriverRtc.c


示例10: rtc_test

void rtc_test()
{
    unsigned char sec,min,hour,day,month,year;
    UART_Printf("\n\rConnections SCL->P0.6 SDA->P0.7");
	UART_Printf("\n\r Make connections and hit 'k' to test! ");
    while(UART_RxChar()!='k');   

	RTC_Init();

	
 /*##### Set the time and Date only once. Once the Time and Date is set, comment these lines
         and reflash the code. Else the time will be set every time the controller is reset*/
    RTC_SetTime(0x10,0x40,0x00);  //  10:40:20 am
    RTC_SetDate(0x01,0x01,0x15);  //  1st Jan 2015

   /* Display the Time and Date continuously */ 
   while(1)
    {
        RTC_GetTime(&hour,&min,&sec);      
        RTC_GetDate(&day,&month,&year);        
        UART_Printf("\n\rtime:%2x:%2x:%2x  \nDate:%2x/%2x/%2x",(uint16_t)hour,(uint16_t)min,(uint16_t)sec,(uint16_t)day,(uint16_t)month,(uint16_t)year);
     }
    
   
}
开发者ID:Rajusr70，项目名称:AT89S52_Ultra_Development_Kit，代码行数:25，代码来源:main.c


示例11: RTC_to_default_config

void RTC_to_default_config(void)
{
    //enable clk for PWR & allow access to RTC
    /* Enable the PWR clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */
    PWR_RTCAccessCmd(ENABLE);

    /* RTC Configuration -------------------------------------------------------*/
    RTC_Config();
    RTC_DateStructure.RTC_Month = RTC_Month_May;
    RTC_DateStructure.RTC_Date = 1;
    RTC_DateStructure.RTC_Year = 13;
    RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Wednesday;


    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours = 12;
    RTC_TimeStructure.RTC_Minutes = 00;
    RTC_TimeStructure.RTC_Seconds = 00;


    RTC_SetTime(RTC_Format_BIN, &RTC_TimeStructure);
    //RTC_SetDate(RTC_Format_BIN,&RTC_DateStructure);

    //disable access to RTC & disable clk to PWR
    PWR_RTCAccessCmd(DISABLE);
    //RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, DISABLE);
}
开发者ID:jackyogi，项目名称:WorkingUniversal，代码行数:30，代码来源:GTSV_RTC.c


示例12: conv2d

void RTCDue::setTime (const char* time)
{
  _hour   = conv2d(time);
  _minute = conv2d(time + 3);
  _second = conv2d(time + 6);
  
  RTC_SetTime (RTC, _hour, _minute, _second);
}
开发者ID:MarkusLange，项目名称:RTCDue，代码行数:8，代码来源:RTCDue.cpp


示例13: rtc_write

void rtc_write(void) {
  if(!rtc_ok) {
    // Enable the PWR clock
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    // Allow access to RTC
    PWR_BackupAccessCmd(ENABLE);

    // Enable the LSE OSC
    RCC_LSEConfig(RCC_LSE_ON);
  
    // Wait till LSE is ready
    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET);
  
    // Select the RTC Clock Source
    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
  
    // Enable the RTC Clock
    RCC_RTCCLKCmd(ENABLE);

    // Wait for RTC APB registers synchronisation
    RTC_WaitForSynchro();

    // Enable The TimeStamp 
    RTC_TimeStampCmd(RTC_TimeStampEdge_Falling, ENABLE); // TODO: can return ERROR

    RTC_InitTypeDef RTC_InitStructure;
  
    RTC_InitStructure.RTC_AsynchPrediv = 0x7F;
    RTC_InitStructure.RTC_SynchPrediv = 0xFF;
    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
    RTC_Init(&RTC_InitStructure);
  }
  
  RTC_TimeTypeDef TimeRTC;
  RTC_DateTypeDef DateRTC;

  TimeRTC.RTC_H12     = RTC_H12_AM; // Always AM for 24H
  TimeRTC.RTC_Hours   = rtc_hour;
  TimeRTC.RTC_Minutes = rtc_minute;
  TimeRTC.RTC_Seconds = rtc_second;
  
  RTC_SetTime(RTC_Format_BIN, &TimeRTC);
  
  (void)RTC->DR;
  
  DateRTC.RTC_WeekDay = rtc_day;
  DateRTC.RTC_Date    = rtc_date;
  DateRTC.RTC_Month   = rtc_month;
  DateRTC.RTC_Year    = rtc_year;
  
  RTC_SetDate(RTC_Format_BIN, &DateRTC); // TODO: can return ERROR

  RTC_WriteBackupRegister(RTC_BKP_DR0, 0xCA7E);
  
  rtc_ok = true;
}
开发者ID:stg，项目名称:SmartWatch，代码行数:57，代码来源:driver_rtc.c


示例14: SetRTC_Time

void SetRTC_Time(void)
{
		// Set the time to 01h 00mn 00s AM 
	RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
	RTC_TimeStructure.RTC_Hours   = 0x01;
	RTC_TimeStructure.RTC_Minutes = 0x00;
	RTC_TimeStructure.RTC_Seconds = 0x00;  

	RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure); // Write values to registers
}
开发者ID:Bigboy20769，项目名称:TCode，代码行数:10，代码来源:RTC.cpp


示例15: RTC_change_time

void RTC_change_time(uint8_t hr, uint8_t min, uint8_t s)
{
    PWR_RTCAccessCmd(ENABLE);
    RTC_TimeStructure.RTC_H12     = RTC_H12_AM;
    RTC_TimeStructure.RTC_Hours = hr;
    RTC_TimeStructure.RTC_Minutes = min;
    RTC_TimeStructure.RTC_Seconds = s;
    RTC_SetTime(RTC_Format_BIN, &RTC_TimeStructure);
    PWR_RTCAccessCmd(DISABLE);
}
开发者ID:jackyogi，项目名称:WorkingUniversal，代码行数:10，代码来源:GTSV_RTC.c


示例16: setting_time

static void setting_time(void)
{
  /* set 8:29:55 */
  RTC_TimeTypeDef RTC_TimeStruct;
  RTC_TimeStruct.RTC_Hours = 0x08;
  RTC_TimeStruct.RTC_Minutes = 0x29;
  RTC_TimeStruct.RTC_Seconds = 0x55;

  RTC_SetTime(RTC_Format_BCD, &RTC_TimeStruct);

}
开发者ID:fboris，项目名称:stm32_RTC_demo，代码行数:11，代码来源:RTC.c


示例17: rtc_set_cb

void rtc_set_cb(guiObject_t *obj, const void *data)
{
    (void)obj;
    if ((long)data == TIMEBUTTON) {
        RTC_SetTime(Rtc.value[HOUR], Rtc.value[MINUTE], Rtc.value[SECOND]);
        GUI_Redraw(&gui->acttime);
    } else if ((long)data == DATEBUTTON) {
        RTC_SetDate(Rtc.value[YEAR], Rtc.value[MONTH], Rtc.value[DAY]);
        GUI_Redraw(&gui->actdate);
    }
}
开发者ID:TheSFReader，项目名称:deviation，代码行数:11，代码来源:rtc_config.c


示例18: RTC_Set

void RTC_Set(tm_elems *tm){
    LDD_RTC_TTime ttime;
    ttime.Day = tm->date;
    ttime.DayOfWeek = tm->dow;
    ttime.Hour = tm->hours;
    ttime.Minute = tm->minutes;
    ttime.Month = tm->month;
    ttime.Second = tm->seconds;
    ttime.Year = tm->year + 2000;

    RTC_SetTime(RTC, &ttime);
}
开发者ID:SeismicPi，项目名称:SeismicPi，代码行数:12，代码来源:HAL_RTC.cpp


示例19: changeHours

void changeHours(struct tm *dt)
{
	unsigned int buttonsState;
	unsigned int nextState;
	
	LCD_Clear();
	LCD_Goto(0,1);
	LCD_WriteString(str1);
	
	while(nextState != SET_HOURS)
	{
		buttonsState = Button_Read();
		nextState = decodeButtons_inHours(buttonsState);
		
		//Actualizar o LCD para os novos valores das horas
		LCD_Goto(0,0);
		strftime(buffer,16,"%T",dt);
		LCD_WriteString(buffer);

		switch(nextState)
		{
			case INC_HOURS:
				LCD_Goto(0,1);
				incrementHours(dt);
				break;
				
			case DEC_HOURS:
				LCD_Goto(0,1);
				decrementHours(dt);
				break;
			
			case INC_MINUTES:
				incrementMinutes(dt);
				break;
			
			case DEC_MINUTES:
				decrementMinutes(dt);
				break;
			
			case CHANGE_FIELD:
				actualPosition = (actualPosition + 1)%LEN_ENUM;
				break;
					
			default:
				break;
		}
	}
	RTC_SetTime(dt);
	RTC_SetDate(dt);
	RTC_SetDays(dt);
	LCD_Clear();

}
开发者ID:isel-31612，项目名称:SE1SemInv1314，代码行数:53，代码来源:ChangeTime.c


示例20: System_Time_Init

static void System_Time_Init(void)
{
	/* RTC Block section ------------------------------------------------------ */
	// Init RTC module
	RTC_Init(LPC_RTC);

    /* Disable RTC interrupt */
    NVIC_DisableIRQ(RTC_IRQn);
    /* preemption = 1, sub-priority = 1 */
    NVIC_SetPriority(RTC_IRQn, ((0x01<<3)|0x01));

	/* Enable rtc (starts increase the tick counter and second counter register) */
	RTC_ResetClockTickCounter(LPC_RTC);
	RTC_Cmd(LPC_RTC, ENABLE);
	RTC_CalibCounterCmd(LPC_RTC, DISABLE);

	/* Set current time for RTC */
	// Current time is 06:45:00PM, 2011-03-25
	RTC_SetTime (LPC_RTC, RTC_TIMETYPE_SECOND, 0);
	RTC_SetTime (LPC_RTC, RTC_TIMETYPE_MINUTE, 45);
	RTC_SetTime (LPC_RTC, RTC_TIMETYPE_HOUR, 15);
	RTC_SetTime (LPC_RTC, RTC_TIMETYPE_MONTH, 3);
	RTC_SetTime (LPC_RTC, RTC_TIMETYPE_YEAR, 2014);
	RTC_SetTime (LPC_RTC, RTC_TIMETYPE_DAYOFMONTH, 30);

	return;
}
开发者ID:waitig，项目名称:GasSub_LPC1788，代码行数:27，代码来源:user_main.c



注：本文中的RTC_SetTime函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTC_WaitForLastTask函数代码示例发布时间：2022-05-30
下一篇：
C++ RTC_SetPrescaler函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap