• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTC_ITConfig函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTC_ITConfig函数的典型用法代码示例。如果您正苦于以下问题：C++ RTC_ITConfig函数的具体用法？C++ RTC_ITConfig怎么用？C++ RTC_ITConfig使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTC_ITConfig函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SetRTCTime

/*********************************
**函数名:SetRTCTime
**功能:设置时间，除了把Real_Time的值改变外,还要把时分秒转换为RTC计数值,年月日存到后备寄存器上
**注意事项:函数内会自动根据年月日计算星期,并且返回到*time上
**********************************/
void SetRTCTime(T_STRUCT* time)
{
	u32 count;
	RTC_ITConfig(RTC_IT_SEC, DISABLE);	//关闭秒中断

	RTC_WaitForLastTask();
	//付时间值到Real_Time上
	Real_Time.year=time->year;
	Real_Time.month=time->month;
	Real_Time.day=time->day;
	Real_Time.hour=time->hour;
	Real_Time.minute=time->minute;
	Real_Time.sec=time->sec;
	//计算星期
	time->date=Real_Time.date=GetDate(time);

	//把新的年月日存到掉电寄存器上

	BKP_WriteBackupRegister(BKP_TIME_DATE,Real_Time.date);
//	RTC_WaitForLastTask();
	BKP_WriteBackupRegister(BKP_TIME_DAY,Real_Time.day);
//	RTC_WaitForLastTask();
	BKP_WriteBackupRegister(BKP_TIME_MONTH,Real_Time.month);
//	RTC_WaitForLastTask();
	BKP_WriteBackupRegister(BKP_TIME_YEAR,Real_Time.year);
//	RTC_WaitForLastTask();

	//计算新的RTC count值
	count=Real_Time.hour*3600+Real_Time.minute*60+Real_Time.sec;
	RTC_WaitForLastTask();
	RTC_SetCounter(count);
	RTC_WaitForLastTask();
	RTC_ITConfig(RTC_IT_SEC, ENABLE); //打开秒中断
}
开发者ID:jiangtaojiang，项目名称:bloodpressure，代码行数:39，代码来源:RTC.c


示例2: sleep

/***************************************************************************
Declaration : void sleep(char wdt_prescaler)

Description : Sleep until WDT interrupt controlled by wdt_prescaler
***************************************************************************/
void sleep(int data_ms, char mode)
{
   /* Enable the RTC Alarm interrupt */
    RTC_ITConfig(RTC_IT_ALR, ENABLE);
    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();

    /* Alarm in data_ms */
 //   RTC_SetAlarm(RTC_GetCounter()+ data_ms<<5);

    RTC_SetAlarm(RTC_GetCounter()+ data_ms);
    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();

    /* Request to enter STOP mode with regulator ON */
    PWR_EnterSTOPMode(PWR_Regulator_ON, PWR_STOPEntry_WFI);
    
    /* At this stage the system has resumed from STOP mode -------------------*/

    /* Configures system clock after wake-up from STOP: enable HSE, PLL and select PLL
       as system clock source (HSE and PLL are disabled in STOP mode) */
    /* Enable the RTC Alarm interrupt */
    SYSCLKConfig_STOP();
    RTC_ITConfig(RTC_IT_ALR, DISABLE);
   /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();
	

	

}
开发者ID:QXED，项目名称:MutiNodesBy2.4GWireless，代码行数:36，代码来源:mcu.c


示例3: radiotimer_schedule

void radiotimer_schedule(uint16_t offset) {
    RTC_ITConfig(RTC_IT_ALR, DISABLE);
    //need to disable radio also in case that a radio interrupt is happening
    
    // Set the RTC alarm(RTC timer will alarm at next state of slot)
    RTC_SetAlarm(offset);
    RTC_WaitForLastTask();
    
    //set radiotimer irpstatus
    radiotimer_vars.overflowORcompare = RADIOTIMER_COMPARE;
    RTC_ClearFlag(RTC_IT_ALR);
    RTC_ITConfig(RTC_IT_ALR, ENABLE);
}
开发者ID:Babody，项目名称:openwsn-fw，代码行数:13，代码来源:radiotimer.c


示例4: radiotimer_cancel

void radiotimer_cancel() {
    RTC_ITConfig(RTC_IT_ALR, DISABLE);
    //need to disable radio also in case that a radio interrupt is happening
    
    
    // set RTC alarm (slotlength) 
    RTC_SetAlarm(radiotimer_vars.currentSlotPeriod);
    RTC_WaitForLastTask();
    
    //set radiotimer irpstatus
    radiotimer_vars.overflowORcompare = RADIOTIMER_OVERFLOW;
    RTC_ClearFlag(RTC_IT_ALR);
    RTC_ITConfig(RTC_IT_ALR, ENABLE);
}
开发者ID:Babody，项目名称:openwsn-fw，代码行数:14，代码来源:radiotimer.c


示例5: RTC_Configuration

/**
  * @brief  Configures the RTC.
  * @param  None
  * @retval : None
  */
void RTC_Configuration(void)
{
	/* Enable PWR and BKP clocks */
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
	/* Allow access to BKP Domain */
	PWR_BackupAccessCmd(ENABLE);
	/* Reset Backup Domain */
	BKP_DeInit();
	/* Enable LSE */
	RCC_LSEConfig(RCC_LSE_ON);
	/* Wait till LSE is ready */
	while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
	{} 
	/* Select LSE as RTC Clock Source */
	RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
	/* Enable RTC Clock */
	RCC_RTCCLKCmd(ENABLE);
	/* Wait for RTC registers synchronization */
	RTC_WaitForSynchro();
	/* Wait until last write operation on RTC registers has finished */
	RTC_WaitForLastTask();
	/* Enable the RTC Second */
	RTC_ITConfig(RTC_IT_SEC, ENABLE);
	/* Wait until last write operation on RTC registers has finished */
	RTC_WaitForLastTask();
	/* Set RTC prescaler: set RTC period to 1sec */
	RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) */
	/* Wait until last write operation on RTC registers has finished */
	RTC_WaitForLastTask();
}
开发者ID:zxynk666666，项目名称:bluenergy_wn，代码行数:35，代码来源:system_init.c


示例6: HAL_RTC_Set_UnixAlarm

void HAL_RTC_Set_UnixAlarm(time_t value)
{
	RTC_AlarmTypeDef RTC_AlarmStructure;

	time_t alarm_time = HAL_RTC_Get_UnixTime() + value;

	struct tm *alarm_time_tm;
	alarm_time_tm = localtime(&alarm_time);

	/* Disable the Alarm A */
	RTC_AlarmCmd(RTC_Alarm_A, DISABLE);

    RTC_AlarmStructure.RTC_AlarmTime.RTC_Hours = alarm_time_tm->tm_hour;
	RTC_AlarmStructure.RTC_AlarmTime.RTC_Minutes = alarm_time_tm->tm_min;
	RTC_AlarmStructure.RTC_AlarmTime.RTC_Seconds = alarm_time_tm->tm_sec;
    RTC_AlarmStructure.RTC_AlarmDateWeekDay = alarm_time_tm->tm_mday;
    RTC_AlarmStructure.RTC_AlarmDateWeekDaySel = RTC_AlarmDateWeekDaySel_Date;
    RTC_AlarmStructure.RTC_AlarmMask = RTC_AlarmMask_None;

	/* Configure the RTC Alarm A register */
	RTC_SetAlarm(RTC_Format_BIN, RTC_Alarm_A, &RTC_AlarmStructure);

	/* Enable the RTC Alarm A Interrupt */
	RTC_ITConfig(RTC_IT_ALRA, ENABLE);

	/* Enable the Alarm  A */
	RTC_AlarmCmd(RTC_Alarm_A, ENABLE);

	/* Clear RTC Alarm Flag */
	RTC_ClearFlag(RTC_FLAG_ALRAF);
}
开发者ID:RobertNewkirk，项目名称:particle，代码行数:31，代码来源:rtc_hal.c


示例7: RTC_Configuration

 /**
  * @file   RTC_Configuration
  * @brief  Configures the RTC.
  * @param  无
  * @retval 无
  */
static void RTC_Configuration(void)
{
  //启用PWR和BKP的时钟（from APB1）
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
  //后备域解锁
  PWR_BackupAccessCmd(ENABLE);
  //备份寄存器模块复位
  BKP_DeInit();
  //外部32.768K时钟使能
  RCC_LSEConfig(RCC_LSE_ON);
  //等待稳定
  while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
  {}
  //RTC时钟源配置成LSE（外部32.768K）
  RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
  //RTC开启
  RCC_RTCCLKCmd(ENABLE);
  //开启后需要等待APB1时钟与RTC时钟同步，才能读写寄存器
  RTC_WaitForSynchro();
  //读写寄存器前，要确定上一个操作已经结束
  RTC_WaitForLastTask();
  //使能秒中断
  RTC_ITConfig(RTC_IT_SEC, ENABLE);
  //等待寄存器写入完成
  RTC_WaitForLastTask();
  //设置RTC分频器，使RTC时钟为1Hz
  //RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1)
  RTC_SetPrescaler(32767); 
  //等待写入完成
  RTC_WaitForLastTask();
}
开发者ID:pyjhhh，项目名称:stm32_f1x，代码行数:37，代码来源:rtc.c


示例8: RTC_Configuration

/**
  * @brief  Configures RTC clock source and prescaler.
  * @param  None
  * @retval None
  */
void RTC_Configuration(void)
{
    /* RTC clock source configuration ----------------------------------------*/
	/* Allow access to BKP Domain */
  	PWR_BackupAccessCmd(ENABLE);
	
    /* Reset Backup Domain */
    BKP_DeInit();
  
    /* Enable LSE OSC */
	RCC_LSICmd(ENABLE);
    /* Wait till LSE is ready */
	while(RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET)
    {
    }

    /* Select the RTC Clock Source */
	RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI);

    /* Enable the RTC Clock */
    RCC_RTCCLKCmd(ENABLE);

    /* RTC configuration -----------------------------------------------------*/
    /* Wait for RTC APB registers synchronisation */
    RTC_WaitForSynchro();

    /* Set the RTC time base to 1s */
    RTC_SetPrescaler(32767);  
    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();
	RTC_ITConfig(RTC_IT_ALR, ENABLE);
	RTC_WaitForLastTask();
  
}
开发者ID:idaohang，项目名称:stm32gps-stop，代码行数:39，代码来源:stm32gps_config.c


示例9: rtc_InitWakeUpInterrupt

void rtc_InitWakeUpInterrupt(){
  NVIC_InitTypeDef NVIC_InitStructure;
  EXTI_InitTypeDef  EXTI_InitStructure;

     // NVIC init
    NVIC_InitStructure.NVIC_IRQChannel = RTC_WKUP_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init(&NVIC_InitStructure);

    // ext Interrupt 22 einstellen (fuer WakeUp)
    EXTI_ClearITPendingBit(EXTI_Line22);
    EXTI_InitStructure.EXTI_Line = EXTI_Line22;
    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
    EXTI_InitStructure.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStructure);

    // zum einstellen muss Wakup disabled sein
    RTC_WakeUpCmd(DISABLE);

    // Teiler 16 => 32,768kHz:16 => 2048 Hz
    RTC_WakeUpClockConfig(RTC_WakeUpClock_RTCCLK_Div16);
    // WakeUp Counter einstellen
    RTC_SetWakeUpCounter(16); //set to 16 -> 128 interrupts per second (32768Hz / Div16 = 2048; 2948 / 128 = 16

    // enable Interrupt
    RTC_ITConfig(RTC_IT_WUT, ENABLE);

    // enable Wakeup
    RTC_WakeUpCmd(ENABLE);
}
开发者ID:Quantenkosmos，项目名称:equinox_clock，代码行数:33，代码来源:RTC.c


示例10: SysSetTime

/*设置系统时间*/
void SysSetTime(FUN_BLOCK **funBlock)
{
	DIS_SING *sing_temp;

	GetSubFunBlock(&pfunSubBlock);
	sing_temp = (DIS_SING *)(pfunSubBlock->current_display);
	pfunSubBlock->data_type = ZINUM;//显示属性

	RTC_ITConfig(RTC_IT_SEC, DISABLE);	//关RTC中断，防止systmtime被修改
	strcpy(sing_temp->y2 ,  "请输入时间");
	/*取得VIRTUAL_NUM_LENGTH位数的箱门数*/
	if(CANCEL == KeyDisplay(pfunSubBlock , 10))
	{
		FreeMem();
		return;
	}
	/*读取时间值*/
	systmtime.tm_year = 2000 + (sing_temp->y3[0]-'0')*10 + sing_temp->y3[1]-'0';
	systmtime.tm_mon = (sing_temp->y3[2]-'0')*10 + sing_temp->y3[3]-'0';
	systmtime.tm_mday = (sing_temp->y3[4]-'0')*10 + sing_temp->y3[5]-'0';
	systmtime.tm_hour = (sing_temp->y3[6]-'0')*10 + sing_temp->y3[7]-'0';
	systmtime.tm_min = (sing_temp->y3[8]-'0')*10 + sing_temp->y3[9]-'0';
	memset(sing_temp->y3 , 0 , 10);
	/*写入时间*/
	RTC_Configuration();
	Time_Adjust(&systmtime);//写入系统时间
	BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);

	strcpy(sing_temp->y2 ,  "系统时间修改成功");
	DisplaySubBlock(pfunSubBlock);
		
	FreeMem();
}
开发者ID:eseawind，项目名称:touchCabinet，代码行数:34，代码来源:sysfunction.c


示例11: EnterSTANDBYMode

/**
  * @brief  Enters STANDBY mode, RTC Alarm within 3 second or an external RESET
  *         will wake-up the system from STANDBY
  * @param  None
  * @retval None
  */
static void EnterSTANDBYMode(void)
{
    RTC_AlarmTypeDef  RTC_AlarmStructure;
    RTC_TimeTypeDef   RTC_TimeStructure;

    /* Disable the Alarm A */
    RTC_AlarmCmd(RTC_Alarm_A, DISABLE);

    /* Get the current time */
    RTC_GetTime(RTC_Format_BIN, &RTC_TimeStructure);

    /* Set the alarm to current time + 3s */
    RTC_AlarmStructure.RTC_AlarmTime.RTC_H12     = RTC_TimeStructure.RTC_H12;
    RTC_AlarmStructure.RTC_AlarmTime.RTC_Hours   = RTC_TimeStructure.RTC_Hours;
    RTC_AlarmStructure.RTC_AlarmTime.RTC_Minutes = RTC_TimeStructure.RTC_Minutes;
    RTC_AlarmStructure.RTC_AlarmTime.RTC_Seconds = (RTC_TimeStructure.RTC_Seconds + 0x3) % 60;
    RTC_AlarmStructure.RTC_AlarmDateWeekDay = 31;
    RTC_AlarmStructure.RTC_AlarmDateWeekDaySel = RTC_AlarmDateWeekDaySel_Date;
    RTC_AlarmStructure.RTC_AlarmMask = RTC_AlarmMask_DateWeekDay | RTC_AlarmMask_Hours | RTC_AlarmMask_Minutes;
    RTC_SetAlarm(RTC_Format_BIN, RTC_Alarm_A, &RTC_AlarmStructure);

    /* Enable RTC Alarm A Interrupt: this Interrupt will wake-up the system from
    STANDBY mode (RTC Alarm IT not enabled in NVIC) */
    RTC_ITConfig(RTC_IT_ALRA, ENABLE);

    /* Enable the Alarm A */
    RTC_AlarmCmd(RTC_Alarm_A, ENABLE);

    /* Clear RTC Alarm Flag */
    RTC_ClearFlag(RTC_FLAG_ALRAF);

    /* Request to enter STANDBY mode (Wake Up flag is cleared in PWR_EnterSTANDBYMode function) */
    PWR_EnterSTANDBYMode();
}
开发者ID:yogiyi，项目名称:BP_STM32F030，代码行数:40，代码来源:main.c


示例12: RTC_AlarmConfig

/**
  * @brief  Configures the RTC Alarm.
  * @param  None
  * @retval None
  */
void RTC_AlarmConfig(void)
{
  EXTI_InitTypeDef EXTI_InitStructure;
  RTC_AlarmTypeDef RTC_AlarmStructure;
  NVIC_InitTypeDef NVIC_InitStructure;
  
  /* EXTI configuration */
  EXTI_ClearITPendingBit(EXTI_Line17);
  EXTI_InitStructure.EXTI_Line = EXTI_Line17;
  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
  EXTI_Init(&EXTI_InitStructure);
  
  /* Enable the RTC Alarm Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = RTC_Alarm_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
 
  /* Set the alarmA Masks */
  RTC_AlarmStructure.RTC_AlarmMask = RTC_AlarmMask_All;
  RTC_SetAlarm(RTC_Format_BIN, RTC_Alarm_A, &RTC_AlarmStructure);
  
  /* Set AlarmA subseconds and enable SubSec Alarm : generate 8 interripts per Second */
  RTC_AlarmSubSecondConfig(RTC_Alarm_A, 0xFF, RTC_AlarmSubSecondMask_SS14_5);

  /* Enable AlarmA interrupt */
  RTC_ITConfig(RTC_IT_ALRA, ENABLE);
  
  /* Enable the alarmA */
  RTC_AlarmCmd(RTC_Alarm_A, DISABLE);
  
}
开发者ID:jongtao，项目名称:stm32l-dev-chain，代码行数:40，代码来源:main.c


示例13: RtcSetAlarmConfig

static void RtcSetAlarmConfig( void )
{
    EXTI_InitTypeDef EXTI_InitStructure;
    RTC_AlarmTypeDef RTC_AlarmStructure;
    NVIC_InitTypeDef NVIC_InitStructure;

    /* EXTI configuration */
    EXTI_ClearITPendingBit( EXTI_Line17 );
    EXTI_InitStructure.EXTI_Line = EXTI_Line17;
    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
    EXTI_InitStructure.EXTI_LineCmd = ENABLE;
    EXTI_Init( &EXTI_InitStructure );

    /* Enable the RTC Alarm Interrupt */
    NVIC_InitStructure.NVIC_IRQChannel = RTC_Alarm_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
    //NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init( &NVIC_InitStructure );

    /* Set the alarmA Masks */
    RTC_AlarmStructure.RTC_AlarmMask = RTC_AlarmMask_DateWeekDay;
    RTC_SetAlarm( RTC_Format_BIN, RTC_Alarm_A, &RTC_AlarmStructure );

    /* Enable AlarmA interrupt */
    RTC_ITConfig( RTC_IT_ALRA, DISABLE );

    /* Enable the alarmA */
    RTC_AlarmCmd( RTC_Alarm_A, DISABLE );
}
开发者ID:davincicloud-kr，项目名称:im-l200，代码行数:32，代码来源:rtc-board.c


示例14: TM_RTC_DisableAlarm

void TM_RTC_DisableAlarm(TM_RTC_Alarm_t Alarm) {
	switch (Alarm) {
		case TM_RTC_Alarm_A:
			/* Disable Alarm A */
			RTC_AlarmCmd(RTC_Alarm_A, DISABLE);
			
			/* Disable Alarm A interrupt */
			RTC_ITConfig(RTC_IT_ALRA, DISABLE);
		
			/* Clear Alarm A pending bit */
			RTC_ClearFlag(RTC_IT_ALRA);
			break;
		case TM_RTC_Alarm_B:
			/* Disable Alarm B */
			RTC_AlarmCmd(RTC_Alarm_B, DISABLE);
		
			/* Disable Alarm B interrupt */
			RTC_ITConfig(RTC_IT_ALRB, DISABLE);
		
			/* Clear Alarm B pending bit */
			RTC_ClearFlag(RTC_IT_ALRB);
			break;
		default:
			break;
	}
	
	/* Clear RTC Alarm pending bit */
	EXTI_ClearITPendingBit(EXTI_Line17);
	
	/* Configure EXTI 17 as interrupt */
	EXTI_InitStruct.EXTI_Line = EXTI_Line17;
	EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
	EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising;
	EXTI_InitStruct.EXTI_LineCmd = ENABLE;
	
	/* Initialite Alarm EXTI interrupt */
	EXTI_Init(&EXTI_InitStruct);

	/* Configure the RTC Alarm Interrupt */
	NVIC_InitStruct.NVIC_IRQChannel = RTC_Alarm_IRQn;
	NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = RTC_PRIORITY;
	NVIC_InitStruct.NVIC_IRQChannelSubPriority = RTC_ALARM_SUBPRIORITY;
	NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
	
	/* Initialize RTC Alarm Interrupt */
	NVIC_Init(&NVIC_InitStruct);
}
开发者ID:Mars55，项目名称:stm32f429，代码行数:47，代码来源:tm_stm32f4_rtc.c


示例15: RTC_Configure

// 配置RTC硬件。
void RTC_Configure(void)
{
  	/* Enable PWR and BKP clocks */
  	RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
  
  	/* Allow access to BKP Domain */
  	PWR_BackupAccessCmd(ENABLE);
	
	RCC_RTCCLKCmd(ENABLE);

  	/* Reset Backup Domain */
  	BKP_DeInit();
  
  	/* Wait until last write operation on RTC registers has finished */
  	RTC_WaitForLastTask();	

#ifdef RTCClockSource_LSI

  	/* Enable LSI */ 
  	RCC_LSICmd(ENABLE);

  	/* Wait till LSI is ready */
  	while(RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET);
	
  	/* Select LSI as RTC Clock Source */
  	RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI);  

#elif defined	RTCClockSource_LSE  

  	/* Enable LSE */
  	RCC_LSEConfig(RCC_LSE_ON);

	 /* Wait till LSE is ready */
  	while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET);

  	/* Select LSE as RTC Clock Source */
  	RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);  
	
#endif

	// 上电后需要校准RTC时钟，也即准确计算出RTC的周期时长。
	RTC_Calibrate();

#ifdef RTCClockOutput_Enable  

  	/* Disable the Tamper Pin */
  	BKP_TamperPinCmd(DISABLE); /* To output RTCCLK/64 on Tamper pin, the tamper functionality must be disabled */
                               
  	/* Enable RTC Clock Output on Tamper Pin */
  	BKP_RTCCalibrationClockOutputCmd(ENABLE);
  
#endif 
  
  	/*允许RTC报警中断*/
	RTC_ITConfig(RTC_IT_ALR, ENABLE); 

  	/* Wait until last write operation on RTC registers has finished */
  	RTC_WaitForLastTask();
}
开发者ID:jianblin，项目名称:learngit，代码行数:60，代码来源:mcu_rtc.c


示例16: RTC_Init

 /**
  * @file   RTC_Init
  * @brief  RTC Initialization
  * @param  无
  * @retval 无
  */
void RTC_Init(void)
{
  if (BKP_ReadBackupRegister(BKP_DR1)!= 0xA5A5)
  {
    /* Backup data register value is not correct or not yet programmed (when
    the first time the program is executed) */
    printf("RTC not yet configured....\r\n");
    /* RTC Configuration */
     RTC_Configuration();
	   Time_Regulate();
	/* Adjust time by values entred by the user on the hyperterminal */
    printf("RTC configured....\r\n");
    BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
  }
  else
  {
    /* Check if the Power On Reset flag is set */
    if (RCC_GetFlagStatus(RCC_FLAG_PORRST) != RESET)
    {
      printf("Power On Reset occurred....\r\n");
    }
    /* Check if the Pin Reset flag is set */
    else if (RCC_GetFlagStatus(RCC_FLAG_PINRST) != RESET)
    {
      printf("External Reset occurred....\r\n");
    }

    printf("No need to configure RTC....\r\n");
    /* Wait for RTC registers synchronization */
    RTC_WaitForSynchro();

    /* Enable the RTC Second */
    RTC_ITConfig(RTC_IT_SEC, ENABLE);
    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();
  }

   /* NVIC configuration */
   NVIC_Configuration();

#ifdef RTCClockOutput_Enable
  /* Enable PWR and BKP clocks */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);

  /* Allow access to BKP Domain */
  PWR_BackupAccessCmd(ENABLE);

  /* Disable the Tamper Pin */
  BKP_TamperPinCmd(DISABLE); /* To output RTCCLK/64 on Tamper pin, the tamper
                                 functionality must be disabled */

  /* Enable RTC Clock Output on Tamper Pin */
  BKP_RTCOutputConfig(BKP_RTCOutputSource_CalibClock);
#endif

   /* Clear reset flags */
  RCC_ClearFlag();
  return;
}
开发者ID:pyjhhh，项目名称:stm32_f1x，代码行数:65，代码来源:rtc.c


示例17: radiotimer_setPeriod

void radiotimer_setPeriod(uint16_t period) {

    RTC_ITConfig(RTC_IT_ALR, DISABLE);
    //need to disable radio also in case that a radio interrupt is happening when set Alarm value
    
    
    //Reset RTC Counter to begin a new slot
    RTC_SetAlarm(period);
    RTC_WaitForLastTask();
    
    radiotimer_vars.currentSlotPeriod = period;
    
    //set radiotimer irpstatus
    radiotimer_vars.overflowORcompare = RADIOTIMER_OVERFLOW;
    RTC_ClearFlag(RTC_IT_ALR);
    RTC_ITConfig(RTC_IT_ALR, ENABLE);
}
开发者ID:Babody，项目名称:openwsn-fw，代码行数:17，代码来源:radiotimer.c


示例18: RTC_Init

uint08 RTC_Init(void)
{
    //检查是不是第一次配置时钟
    uint08 temp=0;

    if ( BKP_ReadBackupRegister(BKP_DR1) != 0x5050 )      //从指定的后备寄存器中读出数据:读出了与写入的指定数据不相乎
    {
        RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);    //使能PWR和BKP外设时钟   
        PWR_BackupAccessCmd(ENABLE);    //使能后备寄存器访问 
        BKP_DeInit();   //复位备份区域 	
        RCC_LSEConfig(RCC_LSE_ON);  //设置外部低速晶振(LSE),使用外设低速晶振
        while ( RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET && temp< 252) //检查指定的RCC标志位设置与否,等待低速晶振就绪
        {
            temp++;
            //delay_ms(10);
            //OSTimeDlyHMSM(0, 0, 0, 10); 
        }
        if ( temp>=250 )
        {
          return 1;//初始化时钟失败,晶振有问题	 
        }
        RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);     //设置RTC时钟(RTCCLK),选择LSE作为RTC时钟    
        RCC_RTCCLKCmd(ENABLE);  //使能RTC时钟  
        RTC_WaitForLastTask();  //等待最近一次对RTC寄存器的写操作完成
        RTC_WaitForSynchro();       //等待RTC寄存器同步  
        RTC_ITConfig(RTC_IT_SEC, ENABLE);       //使能RTC秒中断
        RTC_WaitForLastTask();  //等待最近一次对RTC寄存器的写操作完成
        RTC_EnterConfigMode();/// 允许配置	
        RTC_SetPrescaler(32767); //设置RTC预分频的值
        RTC_WaitForLastTask();  //等待最近一次对RTC寄存器的写操作完成
        RTC_Set(2009,12,2,10,0,55);  //设置时间	
        RTC_ExitConfigMode(); //退出配置模式  
        BKP_WriteBackupRegister(BKP_DR1, 0X5050);   //向指定的后备寄存器中写入用户程序数据
    }
    else//系统继续计时
    {

        RTC_WaitForSynchro();   //等待最近一次对RTC寄存器的写操作完成
        RTC_ITConfig(RTC_IT_SEC, ENABLE);   //使能RTC秒中断
        RTC_WaitForLastTask();  //等待最近一次对RTC寄存器的写操作完成
    }
    RTC_NVIC_Config();//RCT中断分组设置		    				     
    RTC_Get();//更新时间	
    return 0; //ok

}
开发者ID:wuzeguang，项目名称:SingleChipMicrocomputer，代码行数:46，代码来源:RTC.c


示例19: RTC_AutoTest

uint8_t RTC_AutoTest(void)
{

	uint8_t i = 0;
	/* Enable PWR and BKP clocks */
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
	
	/* Allow access to BKP Domain */
	PWR_BackupAccessCmd(ENABLE);
	
	/* Reset Backup Domain */
	BKP_DeInit();
	
	/* Enable LSE */
	RCC_LSEConfig(RCC_LSE_ON);
	
	/* Wait till LSE is ready */
	while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
	{	
		Delay_us(50000);
		i++;
		
		if(i>100) //5秒都还没起振，坏了
		{
			return 0;
		}
	}	

	/* Select LSE as RTC Clock Source */
	RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
	
	/* Enable RTC Clock */
	RCC_RTCCLKCmd(ENABLE);
	
	/* Wait for RTC registers synchronization 
	 * 因为RTC时钟是低速的，内环时钟是高速的，所以要同步
	 */
	RTC_WaitForSynchro();
	
	/* Wait until last write operation on RTC registers has finished */
	RTC_WaitForLastTask();
	
	/* Enable the RTC Second */
	RTC_ITConfig(RTC_IT_SEC, ENABLE);
	
	/* Wait until last write operation on RTC registers has finished */
	RTC_WaitForLastTask();
	
	/* Set RTC prescaler: set RTC period to 1sec */
	RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) = 1HZ */
	
	/* Wait until last write operation on RTC registers has finished */
	RTC_WaitForLastTask();
	
	return 1;


}
开发者ID:FanNiu，项目名称:wildfire_stm32_iso_mini，代码行数:58，代码来源:bsp_rtc.c


示例20: TM_RTC_Interrupts

//------------------------------------------
void TM_RTC_Interrupts(uint32_t int_value) {
  /* Clear pending bit */
  EXTI->PR = 0x00400000;

  /* Disable wakeup interrupt */
  RTC_WakeUpCmd(DISABLE);
  /* Disable RTC interrupt flag */
  RTC_ITConfig(RTC_IT_WUT, DISABLE);

  /* NVIC init for RTC */
  NVIC_InitStruct.NVIC_IRQChannel = RTC_WKUP_IRQn;
  NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = RTC_PRIORITY;
  NVIC_InitStruct.NVIC_IRQChannelSubPriority = RTC_WAKEUP_SUBPRIORITY;
  NVIC_InitStruct.NVIC_IRQChannelCmd = DISABLE;
  NVIC_Init(&NVIC_InitStruct); 

  /* RTC connected to EXTI_Line22 */
  EXTI_InitStruct.EXTI_Line = EXTI_Line22;
  EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
  EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising;
  EXTI_InitStruct.EXTI_LineCmd = DISABLE;
  EXTI_Init(&EXTI_InitStruct);

  if (int_value != TM_RTC_Int_Disable) {
    /* Enable NVIC */
    NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init(&NVIC_InitStruct); 
    /* Enable EXT1 interrupt */
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);

    /* First disable wake up command */
    RTC_WakeUpCmd(DISABLE);

    /* Clock divided by 8, 32768 / 8 = 4096 */
    /* 4096 ticks for 1second interrupt */
    RTC_WakeUpClockConfig(RTC_WakeUpClock_RTCCLK_Div8);
    /* Set RTC wakeup counter */
    RTC_SetWakeUpCounter(0x0FFF * int_value);
    /* Enable wakeup interrupt */
    RTC_ITConfig(RTC_IT_WUT, ENABLE);
    /* Enable wakeup command */
    RTC_WakeUpCmd(ENABLE);
  }
}
开发者ID:SergeyPopovGit，项目名称:MICO，代码行数:46，代码来源:rtc.c



注：本文中的RTC_ITConfig函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTC_Init函数代码示例发布时间：2022-05-30
下一篇：
C++ RTC_GetTime函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap