C++ RTC_ClearITPendingBit函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中RTC_ClearITPendingBit函数的典型用法代码示例。如果您正苦于以下问题：C++ RTC_ClearITPendingBit函数的具体用法？C++ RTC_ClearITPendingBit怎么用？C++ RTC_ClearITPendingBit使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了RTC_ClearITPendingBit函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: RTC_IRQHandler

/*******************************************************************************
* 函 数 名:	
* 功    能:	
* 参    数：
* 返    回:	
*******************************************************************************/
void RTC_IRQHandler(void)
{	
	//秒钟中断	    
	if( RTC_GetITStatus(RTC_IT_SEC) != RESET )
	{							
		if( sec_irq_handle != NULL)
		{
			sec_irq_handle();	
		}
		
		RTC_ClearITPendingBit(RTC_IT_SEC);
	}
	//闹钟中断
	if(RTC_GetITStatus(RTC_IT_ALR) != RESET)
	{
		if(alrf_irq_hanle != NULL)
		{
			alrf_irq_hanle();
		}
		RTC_ClearITPendingBit(RTC_IT_ALR);
	} 	
	//溢出中断
	if(RTC_GetITStatus(RTC_IT_OW) != RESET)
	{
		if(ow_irq_hanle != NULL)
		{
			ow_irq_hanle();
		}
		RTC_ClearITPendingBit(RTC_IT_OW);
	}	   	
	RTC_WaitForLastTask();				 	   	 
}

开发者ID:tixlegeek，项目名称:STM32F103RBT6，代码行数:38，代码来源:rtc.c

示例2: RTC_IRQHandler

/*
************************************************************
*	函数名称：	RTC_IRQHandler
*
*	函数功能：	RTC一般功能中断
*
*	入口参数：	无
*
*	返回参数：	无
*
*	说明：		
************************************************************
*/
void RTC_IRQHandler(void)
{

	//秒中断
	if(RTC_GetITStatus(RTC_IT_SEC))
	{
		RTC_ClearITPendingBit(RTC_IT_SEC); //清秒中断
		//........do something
	}
	//溢出中断
	if(RTC_GetITStatus(RTC_IT_OW))
	{
		RTC_ClearITPendingBit(RTC_IT_OW); //清溢出中断
		//........do something
	}
	//闹钟中断
	if(RTC_GetITStatus(RTC_IT_ALR))
	{
		RTC_ClearITPendingBit(RTC_IT_ALR); //清闹钟中断
		//........do something
	}
	
	RTC_WaitForLastTask(); //等待操作完成

}

开发者ID:yzfcer，项目名称:wind-os，代码行数:38，代码来源:rtc.c

示例3: RTC_WKUP_IRQHandler

/*
 * RTC wakeup interrupt handler.
 */
void RTC_WKUP_IRQHandler(void)
{
#if POSCFG_FEATURE_TICKLESS != 0

  if (RTC_GetITStatus(RTC_IT_WUT) != RESET) {

/*
 * Stop wakeup counter and ensure 
 * system wakes up from sleep.
 */
    RTC_WakeUpCmd(DISABLE);
    RTC_ClearITPendingBit(RTC_IT_WUT);
    EXTI_ClearITPendingBit(EXTI_Line22);
    SCB->SCR &= ~SCB_SCR_SLEEPONEXIT_Msk;
  }

#else

  c_pos_intEnter();

  if (RTC_GetITStatus(RTC_IT_WUT) != RESET) {

    RTC_ClearITPendingBit(RTC_IT_WUT);
    EXTI_ClearITPendingBit(EXTI_Line22);
    c_pos_timerInterrupt();
  }

  c_pos_intExitQuick();

#endif
}

开发者ID:AriZuu，项目名称:picoos，代码行数:34，代码来源:tick_rtc.c

示例4: RTC_IRQHandler

void RTC_IRQHandler(void)
{
    if (RTC_GetITStatus(RTC_IT_SEC) != RESET)
    {
    /* Clear the RTC Second interrupt */
    RTC_ClearITPendingBit(RTC_IT_SEC);

    /* Enable time update */

    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();
    Time_Display();
    }

    if (RTC_GetITStatus(RTC_IT_ALR) != RESET)
    {
    /* Clear the RTC Second interrupt */
    RTC_ClearITPendingBit(RTC_IT_ALR);

    /* Enable time update */

    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();
    printf(" RTC WAKEUP\r\n");
    }
}

开发者ID:emlslxl，项目名称:STM32_uCOS-III，代码行数:26，代码来源:stm32f10x_it.c

示例5: RTC_IRQHandler

void RTC_IRQHandler(void) {
#ifdef STM32F1
  RTC_ClearITPendingBit(RTC_IT_ALR);
#else
  RTC_ClearITPendingBit(RTC_IT_ALRA);
#endif
}

开发者ID:RobinLin，项目名称:Espruino，代码行数:7，代码来源:stm32_it.c

示例6: rtcIrqHandler

void rtcIrqHandler(void)
{
    if (RTC_GetITStatus(RTC_IT_SEC) != RESET) {
        RTC_ClearITPendingBit(RTC_FLAG_SEC);
#ifdef PRECISION_IN_MS
        if (RTC_GetCounter() / 999 >= 1) {
            RTC_WaitForLastTask();
            RTC_SetCounter(0);
            RTC_WaitForLastTask();

            ++seconds;
        }
#endif
    }

    /* ignore overflow */
    //if (RTC_GetITStatus(RTC_IT_OW) != RESET) {
    //    RTC_ClearITPendingBit(RTC_FLAG_OW);
    //}
#ifndef PRECISION_IN_MS
    if (RTC_GetITStatus(RTC_IT_ALR) != RESET) {
        RTC_ClearITPendingBit(RTC_FLAG_ALR);
        if (alarm > 0 && alarm != NULL) {
            alarmProc();
        }
    }
#else
    if (alarm > 0 && alarm == seconds
        && alarm != NULL) {
        alarmProc();
    }
#endif
}

开发者ID:running1919，项目名称:qianlab，代码行数:33，代码来源:clock.c

示例7: RTC_IRQHandler

//RTC时钟中断
//每秒触发一次  
//extern u16 tcnt; 
void RTC_IRQHandler(void)
{		 
	if (RTC_GetITStatus(RTC_IT_SEC) != RESET)//秒钟中断
	{							
		RTC_Get();//更新时间   
 	}
	if(RTC_GetITStatus(RTC_IT_ALR)!= RESET)//闹钟中断
	{
		RTC_ClearITPendingBit(RTC_IT_ALR);		//清闹钟中断	  	   
  	} 				  								 
	RTC_ClearITPendingBit(RTC_IT_SEC|RTC_IT_OW);		//清闹钟中断
	RTC_WaitForLastTask();	  	    						 	   	 
}

开发者ID:FateMouse，项目名称:STM32-ExampleCodeAllTest，代码行数:16，代码来源:rtc.c

示例8: RTC_Alarm_IRQHandler

void RTC_Alarm_IRQHandler(void)
{
    if(RTC_GetITStatus(RTC_IT_ALRA) != RESET){
        RTC_ClearITPendingBit(RTC_IT_ALRA);
        EXTI_ClearITPendingBit(EXTI_Line17);
    } 
}

开发者ID:Lejacming，项目名称:The-sea-water-temperature-acquisition-system，代码行数:7，代码来源:RTC.c

示例9: RTC_IRQHandler

/*******************************************************************************
* Function Name  : RTC_IRQHandler
* Description    : This function handles RTC global interrupt request.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RTC_IRQHandler(void)
{
  volatile unsigned long int stanRTC;
  static unsigned char stanRTCTekst[17] = {"0\0"};
  unsigned long int godziny, minuty, sekundy;

  if (RTC_GetITStatus(RTC_IT_SEC) != RESET)
  {
    // Czekaj na zakonczenie ewentualnych operacji zapisu do rejestrów RTC
    RTC_WaitForLastTask();

    // Wyczysc flage od przerwania RTC
    RTC_ClearITPendingBit(RTC_IT_SEC);

    // Zmiana stanu wyprowadzenia PB15 co 1s
    GPIO_WriteBit(GPIOB, GPIO_Pin_15, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIOB, GPIO_Pin_15)));

		stanRTC=RTC_GetCounter();
    //sprintf((char *)stanRTCTekst,"%16i\0",stanRTC);
    //LCD_WriteTextXY(stanRTCTekst,0,1);		   

    sekundy=stanRTC%60;               //liczba sekund od ostatniej pelnej minuty
    minuty=(long int)(stanRTC)/60;    //dzielenie calkowite, "usuniecie" sekund, czas pracy w samych minutach
    godziny=(long int)(minuty)/60;    //dzielenie calkowite, "usuniecie" minut, czas pracy w samych godzinach
    minuty=minuty%60;                 //liczba minut od ostatniej pelnej godziny

    sprintf((char *)stanRTCTekst,"%3i:%02i:%02i\0",godziny,minuty,sekundy);
    LCD_WriteTextXY(stanRTCTekst,7,1);	
  }
}

开发者ID:develorn，项目名称:ARM_function_kamami，代码行数:37，代码来源:stm32f10x_it.c

示例10: RTCAlarm_IRQHandler

/*******************************************************************************
* Function Name  : RTCAlarm_IRQHandler
* Description    : This function handles RTC Alarm interrupt request.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RTCAlarm_IRQHandler(void)
{
	if(RTC_GetITStatus(RTC_IT_ALR) != RESET)
	{
		SPARK_WLAN_SLEEP = 0;

		/* Clear EXTI line17 pending bit */
		EXTI_ClearITPendingBit(EXTI_Line17);

		/* Check if the Wake-Up flag is set */
		if(PWR_GetFlagStatus(PWR_FLAG_WU) != RESET)
		{
			/* Clear Wake Up flag */
			PWR_ClearFlag(PWR_FLAG_WU);
		}

		/* Wait until last write operation on RTC registers has finished */
		RTC_WaitForLastTask();

		/* Clear RTC Alarm interrupt pending bit */
		RTC_ClearITPendingBit(RTC_IT_ALR);

		/* Wait until last write operation on RTC registers has finished */
		RTC_WaitForLastTask();
	}
}

开发者ID:Mike43110，项目名称:core-firmware，代码行数:33，代码来源:stm32_it.cpp

示例11: RTC_IRQHandler

//RTC时钟中断
//每秒触发一次  
//extern u16 tcnt; 
void RTC_IRQHandler(void)
{		 
	if (RTC_GetITStatus(RTC_IT_SEC) != RESET)//秒钟中断
	{							
		RTC_Get();//更新时间   
 	}
	if(RTC_GetITStatus(RTC_IT_ALR)!= RESET)//闹钟中断
	{
		RTC_ClearITPendingBit(RTC_IT_ALR);		//清闹钟中断	  	
	  RTC_Get();				//更新时间   
  	printf("Alarm Time:%d-%d-%d %d:%d:%d\n",calendar.w_year,calendar.w_month,calendar.w_date,calendar.hour,calendar.min,calendar.sec);//输出闹铃时间	
		
  	} 				  								 
	RTC_ClearITPendingBit(RTC_IT_SEC|RTC_IT_OW);		//清闹钟中断
	RTC_WaitForLastTask();	  	    						 	   	 
}

开发者ID:wangdie1，项目名称:ElectronicDesignContest，代码行数:19，代码来源:rtc.c

示例12: RTC_IRQHandler

void RTC_IRQHandler(void)
{
	/* 判断中断标志位_秒中断 是否被置位 */
	if (RTC_GetITStatus(RTC_IT_SEC) != RESET)
	{
		/* Clear the RTC Second interrupt */
		RTC_ClearITPendingBit(RTC_IT_SEC);
		
		/* Toggle GPIO_LED pin 6 each 1s */
		//GPIO_WriteBit(GPIO_LED, GPIO_Pin_6, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIO_LED, GPIO_Pin_6)));
		
		/* Enable time update
		 * TimeDisplay是一个标志位，只有等于1时才让串口发送时 间数据，即让串口一秒发一次时间值 */
		TimeDisplay = 1;
		
		/* Wait until last write operation on RTC registers has finished */
		RTC_WaitForLastTask();
		/* Reset RTC Counter when Time is 23:59:59
		 * 当时间走到23:59:59秒时RTC计数器中的值清零，0x00015180=23*3600+56*60+59 */
		if (RTC_GetCounter() == 0x00015180)
		{
			RTC_SetCounter(0x0);
			/* Wait until last write operation on RTC registers has finished */
			RTC_WaitForLastTask();
		}
	}
}

开发者ID:vcheung，项目名称:STM32，代码行数:27，代码来源:stm32f10x_it.c

示例13: RTC_IRQHandler

/*******************************************************************************
 * Function Name  : RTC_IRQHandler
 * Description    : This function handles RTC global interrupt request.
 * Input          : None
 * Output         : None
 * Return         : None
 *******************************************************************************/
void RTC_IRQHandler(void)
{
	if(RTC_GetITStatus(RTC_IT_SEC) != RESET)
	{
//		/* If counter is equal to 86339: one day was elapsed */
//		if((RTC_GetCounter() / 3600 == 23)
//				&& (((RTC_GetCounter() % 3600) / 60) == 59)
//				&& (((RTC_GetCounter() % 3600) % 60) == 59)) /* 23*3600 + 59*60 + 59 = 86339 */
//		{
//			/* Wait until last write operation on RTC registers has finished */
//			RTC_WaitForLastTask();
//
//			/* Reset counter value */
//			RTC_SetCounter(0x0);
//
//			/* Wait until last write operation on RTC registers has finished */
//			RTC_WaitForLastTask();
//
//			/* Increment no_of_days_elapsed variable here */
//		}

		/* Clear the RTC Second Interrupt pending bit */
		RTC_ClearITPendingBit(RTC_IT_SEC);

		/* Wait until last write operation on RTC registers has finished */
		RTC_WaitForLastTask();
	}
}

开发者ID:Mike43110，项目名称:core-firmware，代码行数:35，代码来源:stm32_it.cpp

示例14: p_pos_powerTickResume

void p_pos_powerTickResume()
{
/*
 * Make sure that wakeup counter is disabled.
 */
  NVIC_DisableIRQ(RTC_WKUP_IRQn);
  RTC_WakeUpCmd(DISABLE);
  RTC_ClearITPendingBit(RTC_IT_WUT);
  EXTI_ClearITPendingBit(EXTI_Line22);

/*
 * Do application-specific clock setup after sleep.
 */
  portRestoreClocksAfterWakeup();

/*
 * Now step the timer with amount of ticks we really slept.
 */
  c_pos_timerStep(HZ * (rtcTimeNow() - startTime) / 1000);

/*
 * Safe to enable systick now.
 */
  SysTick->CTRL |= (SysTick_CTRL_TICKINT_Msk |
                    SysTick_CTRL_ENABLE_Msk);
}

开发者ID:AriZuu，项目名称:picoos，代码行数:26，代码来源:tick_rtc.c

示例15: RTC_IRQHandler

void RTC_IRQHandler(void)
{
    long xHigherPriorityTaskWoken = pdFALSE;

    current_rtime.sec += 1;
    if (current_rtime.sec >= 60) {
        current_rtime.sec -= 60;
        current_rtime.min += 1;
        if (current_rtime.min >= 60) {
            current_rtime.min -= 60;
            current_rtime.hour += 1;
            if (current_rtime.hour >= 24) {
                current_rtime.hour -= 24;
            }
        }

        struct guievent gevnt;
        gevnt.evnt = GUI_E_CLOCK;
        gevnt.buf = NULL;
        gevnt.kpar = 0;
        xQueueSendFromISR(toGuiQueue, &gevnt, &xHigherPriorityTaskWoken);
    }

    /* clear RTC irq pending bit of the 'seconds' irq */
    RTC_ClearITPendingBit(RTC_IT_SEC);

    /* signal end-of-irq and possible reschedule point */
    portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
}

开发者ID:herling，项目名称:PIP-Watch，代码行数:29，代码来源:rtclock.c

示例16: RTC_Alarm_IRQHandler

void RTC_Alarm_IRQHandler()
{
    if(RTC_GetITStatus(RTC_IT_ALRA) != RESET)
    {
    	//RTC_AlarmCmd(RTC_Alarm_A, ENABLE);

    	PWR_RTCAccessCmd(ENABLE); // Доступ в RTC
    	RTC_ClearITPendingBit(RTC_IT_ALRA);
    	RTC_ClearFlag(RTC_FLAG_ALRAF);
    	PWR_RTCAccessCmd(DISABLE);

        EXTI_ClearITPendingBit(EXTI_Line17);
        //OLED_DrawString_fast(0,0,"alarm",10);
    }

    /////////////////////////?????????????????????????????????????????????????????????????????????????????????????
    if(RTC_GetFlagStatus(RTC_FLAG_ALRAF) != RESET)
    {
    	PWR_RTCAccessCmd(ENABLE);
    	RTC_ClearFlag(RTC_FLAG_ALRAF);
    	PWR_RTCAccessCmd(DISABLE);
    	//f_WakeupToAlarm=1;
    	curent_cmd = 5;

    }
/////////////////////////



}

开发者ID:tymbys，项目名称:Watch，代码行数:30，代码来源:main.c

示例17: RTC_IRQHandler

/*******************************************************************************
* Function Name  : RTC_IRQHandler
* Description    : This function handles RTC global interrupt request.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RTC_IRQHandler(void)
{
    if(RTC_GetFlagStatus(RTC_IT_ALR) != RESET)
    {
      RTC_ClearITPendingBit(RTC_IT_ALR);      //Clear RTC Alarm interrupt pending bit
      RTC_WaitForLastTask();                  //Wait until last write operation on RTC registers has finished
    }
}

开发者ID:barriquello，项目名称:iotstack，代码行数:15，代码来源:stm32f10x_it.c

示例18: RTC_IRQHandler

/*******************************************************************************
* Function Name  : RTC_IRQHandler
* Description    : This function handles RTC global interrupt request.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RTC_IRQHandler(void)
{
  if( RTC_GetITStatus(RTC_IT_ALR) == SET ) {
    cmdPowerUp();  // it's a hard kick in the pants!
    
    RTC_ClearITPendingBit(RTC_IT_ALR);
  }
}

开发者ID:sutajiokousagi，项目名称:cpid，代码行数:15，代码来源:stm32f10x_it.c

示例19: RTC_WKUP_IRQHandler

void RTC_WKUP_IRQHandler(void)
{
  if (RTC_GetITStatus(RTC_IT_WUT) != RESET) {
    EXTI_ClearITPendingBit(EXTI_Line22);
    RTC_ClearITPendingBit(RTC_IT_WUT);
    RTC_ClearFlag(RTC_FLAG_WUTF);
  }
}

开发者ID:RobinLin，项目名称:Espruino，代码行数:8，代码来源:stm32_it.c

示例20: RTC_IRQHandler

void RTC_IRQHandler(void)
{
  if (RTC_GetITStatus(RTC_IT_SEC) != RESET)
  {
	/* Clear the RTC Second interrupt */
	RTC_ClearITPendingBit(RTC_IT_SEC);  
  }
}

开发者ID:ECOORG，项目名称:gokit-mcu-hw2，代码行数:8，代码来源:stm32f10x_it.c

注：本文中的RTC_ClearITPendingBit函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。