• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RNA_int_set函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RNA_int_set函数的典型用法代码示例。如果您正苦于以下问题：C++ RNA_int_set函数的具体用法？C++ RNA_int_set怎么用？C++ RNA_int_set使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RNA_int_set函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: nlaedit_select_leftright_invoke

static int nlaedit_select_leftright_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
	bAnimContext ac;
	short leftright = RNA_enum_get(op->ptr, "mode");
	
	/* get editor data */
	if (ANIM_animdata_get_context(C, &ac) == 0)
		return OPERATOR_CANCELLED;
		
	/* handle mode-based testing */
	if (leftright == NLAEDIT_LRSEL_TEST) {
		Scene *scene = ac.scene;
		ARegion *ar = ac.ar;
		View2D *v2d = &ar->v2d;
		float x;
		
		/* determine which side of the current frame mouse is on */
		UI_view2d_region_to_view(v2d, event->mval[0], event->mval[1], &x, NULL);
		if (x < CFRA)
			RNA_int_set(op->ptr, "mode", NLAEDIT_LRSEL_LEFT);
		else 	
			RNA_int_set(op->ptr, "mode", NLAEDIT_LRSEL_RIGHT);
	}
	
	/* perform selection */
	return nlaedit_select_leftright_exec(C, op);
}
开发者ID:vanangamudi，项目名称:blender-main，代码行数:27，代码来源:nla_select.c


示例2: node_select_invoke

static int node_select_invoke(bContext *C, wmOperator *op, const wmEvent *event)
{
	RNA_int_set(op->ptr, "mouse_x", event->mval[0]);
	RNA_int_set(op->ptr, "mouse_y", event->mval[1]);

	return node_select_exec(C, op);
}
开发者ID:bitfusionio，项目名称:blender，代码行数:7，代码来源:node_select.c


示例3: ED_view3d_operator_properties_viewmat_set

void ED_view3d_operator_properties_viewmat_set(bContext *C, wmOperator *op)
{
	ARegion *ar = CTX_wm_region(C);
	RegionView3D *rv3d = ED_view3d_context_rv3d(C);

	if (!RNA_struct_property_is_set(op->ptr, "region_width"))
		RNA_int_set(op->ptr, "region_width", ar->winx);

	if (!RNA_struct_property_is_set(op->ptr, "region_height"))
		RNA_int_set(op->ptr, "region_height", ar->winy);

	if (!RNA_struct_property_is_set(op->ptr, "perspective_matrix"))
		RNA_float_set_array(op->ptr, "perspective_matrix", (float *)rv3d->persmat);
}
开发者ID:greg100795，项目名称:blender-git，代码行数:14，代码来源:view3d_view.c


示例4: graphview_cursor_setprops

/* set the operator properties from the initial event */
static void graphview_cursor_setprops(bContext *C, wmOperator *op, const wmEvent *event)
{
	Scene *scene = CTX_data_scene(C);
	ARegion *ar = CTX_wm_region(C);
	float viewx, viewy;
	int frame;
	
	/* abort if not active region (should not really be possible) */
	if (ar == NULL)
		return;
	
	/* convert from region coordinates to View2D 'tot' space */
	UI_view2d_region_to_view(&ar->v2d, event->mval[0], event->mval[1], &viewx, &viewy);
	
	/* frame is rounded to the nearest int, since frames are ints */
	frame = iroundf(viewx);
	
	if (scene->r.flag & SCER_LOCK_FRAME_SELECTION) {
		CLAMP(frame, PSFRA, PEFRA);
	}
	
	/* store the values in the operator properties */
	RNA_int_set(op->ptr, "frame", frame);
	RNA_float_set(op->ptr, "value", viewy);
}
开发者ID:shyamalschandra，项目名称:blender_2.75a，代码行数:26，代码来源:graph_ops.c


示例5: change_frame_modal

/* Modal event handling of frame changing */
static int change_frame_modal(bContext *C, wmOperator *op, const wmEvent *event)
{
	/* execute the events */
	switch (event->type) {
		case ESCKEY:
			return OPERATOR_FINISHED;
		
		case MOUSEMOVE:
			RNA_int_set(op->ptr, "frame", frame_from_event(C, event));
			change_frame_apply(C, op);
			break;
		
		case LEFTMOUSE: 
		case RIGHTMOUSE:
		case MIDDLEMOUSE:
			/* we check for either mouse-button to end, as checking for ACTIONMOUSE (which is used to init 
			 * the modal op) doesn't work for some reason
			 */
			if (event->val == KM_RELEASE)
				return OPERATOR_FINISHED;
			break;
	}

	return OPERATOR_RUNNING_MODAL;
}
开发者ID:SuriyaaKudoIsc，项目名称:blender-git，代码行数:26，代码来源:anim_ops.c


示例6: ed_marker_move_cancel

/* only for modal */
static void ed_marker_move_cancel(bContext *C, wmOperator *op)
{
	RNA_int_set(op->ptr, "frames", 0);
	ed_marker_move_apply(C, op);
	ed_marker_move_exit(C, op);	
	
	WM_event_add_notifier(C, NC_SCENE|ND_MARKERS, NULL);
}
开发者ID:jinjoh，项目名称:NOOR，代码行数:9，代码来源:anim_markers.c


示例7: ed_marker_move_cancel

/* only for modal */
static int ed_marker_move_cancel(bContext *C, wmOperator *op)
{
	RNA_int_set(op->ptr, "frames", 0);
	ed_marker_move_apply(C, op);
	ed_marker_move_exit(C, op);

	return OPERATOR_CANCELLED;
}
开发者ID:JasonWilkins，项目名称:blender-wayland，代码行数:9，代码来源:anim_markers.c


示例8: actkeys_duplicate_invoke

static int actkeys_duplicate_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
	actkeys_duplicate_exec(C, op);
	
	RNA_int_set(op->ptr, "mode", TFM_TIME_TRANSLATE);
	WM_operator_name_call(C, "TFM_OT_transform", WM_OP_INVOKE_REGION_WIN, op->ptr);

	return OPERATOR_FINISHED;
}
开发者ID:jinjoh，项目名称:NOOR，代码行数:9，代码来源:action_edit.c


示例9: wm_alembic_export_draw

static void wm_alembic_export_draw(bContext *C, wmOperator *op)
{
	PointerRNA ptr;

	RNA_pointer_create(NULL, op->type->srna, op->properties, &ptr);

	/* Conveniently set start and end frame to match the scene's frame range. */
	Scene *scene = CTX_data_scene(C);

	if (scene != NULL && RNA_boolean_get(&ptr, "init_scene_frame_range")) {
		RNA_int_set(&ptr, "start", SFRA);
		RNA_int_set(&ptr, "end", EFRA);

		RNA_boolean_set(&ptr, "init_scene_frame_range", false);
	}

	ui_alembic_export_settings(op->layout, &ptr);
}
开发者ID:wisaac407，项目名称:blender，代码行数:18，代码来源:io_alembic.c


示例10: gp_convert_set_end_frame

/* Check end_frame is always > start frame! */
static void gp_convert_set_end_frame(struct Main *UNUSED(main), struct Scene *UNUSED(scene), struct PointerRNA *ptr)
{
	int start_frame = RNA_int_get(ptr, "start_frame");
	int end_frame = RNA_int_get(ptr, "end_frame");
	
	if (end_frame <= start_frame) {
		RNA_int_set(ptr, "end_frame", start_frame + 1);
	}
}
开发者ID:DarkDefender，项目名称:blender-npr-tess2，代码行数:10，代码来源:gpencil_convert.c


示例11: pose_groups_menu_invoke

/* invoke callback which presents a list of bone-groups for the user to choose from */
static int pose_groups_menu_invoke(bContext *C, wmOperator *op, const wmEvent *UNUSED(event))
{
	Object *ob = ED_pose_object_from_context(C);
	bPose *pose;
	PropertyRNA *prop = RNA_struct_find_property(op->ptr, "type");

	uiPopupMenu *pup;
	uiLayout *layout;
	bActionGroup *grp;
	int i;

	/* only continue if there's an object, and a pose there too */
	if (ELEM(NULL, ob, ob->pose))
		return OPERATOR_CANCELLED;
	pose = ob->pose;

	/* If group index is set, try to use it! */
	if (RNA_property_is_set(op->ptr, prop)) {
		const int num_groups = BLI_listbase_count(&pose->agroups);
		const int group = RNA_property_int_get(op->ptr, prop);

		/* just use the active group index, and call the exec callback for the calling operator */
		if (group > 0 && group <= num_groups) {
			return op->type->exec(C, op);
		}
	}

	/* if there's no active group (or active is invalid), create a new menu to find it */
	if (pose->active_group <= 0) {
		/* create a new menu, and start populating it with group names */
		pup = UI_popup_menu_begin(C, op->type->name, ICON_NONE);
		layout = UI_popup_menu_layout(pup);

		/* special entry - allow to create new group, then use that
		 *	(not to be used for removing though)
		 */
		if (strstr(op->idname, "assign")) {
			uiItemIntO(layout, "New Group", ICON_NONE, op->idname, "type", 0);
			uiItemS(layout);
		}

		/* add entries for each group */
		for (grp = pose->agroups.first, i = 1; grp; grp = grp->next, i++)
			uiItemIntO(layout, grp->name, ICON_NONE, op->idname, "type", i);

		/* finish building the menu, and process it (should result in calling self again) */
		UI_popup_menu_end(C, pup);

		return OPERATOR_INTERFACE;
	}
	else {
		/* just use the active group index, and call the exec callback for the calling operator */
		RNA_int_set(op->ptr, "type", pose->active_group);
		return op->type->exec(C, op);
	}
}
开发者ID:Ichthyostega，项目名称:blender，代码行数:57，代码来源:pose_group.c


示例12: pose_calculate_paths_invoke

/* show popup to determine settings */
static int pose_calculate_paths_invoke(bContext *C, wmOperator *op, const wmEvent *UNUSED(event))
{	
	Object *ob = BKE_object_pose_armature_get(CTX_data_active_object(C));
	
	if (ELEM(NULL, ob, ob->pose))
		return OPERATOR_CANCELLED;
	
	/* set default settings from existing/stored settings */
	{
		bAnimVizSettings *avs = &ob->pose->avs;
		PointerRNA avs_ptr;
		
		RNA_int_set(op->ptr, "start_frame", avs->path_sf);
		RNA_int_set(op->ptr, "end_frame", avs->path_ef);
		
		RNA_pointer_create(NULL, &RNA_AnimVizMotionPaths, avs, &avs_ptr);
		RNA_enum_set(op->ptr, "bake_location", RNA_enum_get(&avs_ptr, "bake_location"));
	}
	
	/* show popup dialog to allow editing of range... */
	// FIXME: hardcoded dimensions here are just arbitrary
	return WM_operator_props_dialog_popup(C, op, 10 * UI_UNIT_X, 10 * UI_UNIT_Y);
}
开发者ID:Moguri，项目名称:blender，代码行数:24，代码来源:pose_edit.c


示例13: change_frame_invoke

/* Modal Operator init */
static int change_frame_invoke(bContext *C, wmOperator *op, const wmEvent *event)
{
	/* Change to frame that mouse is over before adding modal handler,
	 * as user could click on a single frame (jump to frame) as well as
	 * click-dragging over a range (modal scrubbing).
	 */
	RNA_int_set(op->ptr, "frame", frame_from_event(C, event));
	
	change_frame_apply(C, op);
	
	/* add temp handler */
	WM_event_add_modal_handler(C, op);

	return OPERATOR_RUNNING_MODAL;
}
开发者ID:SuriyaaKudoIsc，项目名称:blender-git，代码行数:16，代码来源:anim_ops.c


示例14: view3d_layers_invoke

/* the local per-keymap-entry keymap will solve it */
static int view3d_layers_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
	if(event->ctrl || event->oskey)
		return OPERATOR_PASS_THROUGH;
	
	if(event->shift)
		RNA_boolean_set(op->ptr, "extend", 1);
	
	if(event->alt) {
		int nr= RNA_int_get(op->ptr, "nr") + 10;
		RNA_int_set(op->ptr, "nr", nr);
	}
	view3d_layers_exec(C, op);
	
	return OPERATOR_FINISHED;
}
开发者ID:BHCLL，项目名称:blendocv，代码行数:17，代码来源:view3d_header.c


示例15: select_report_pick_invoke

static int select_report_pick_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
	SpaceInfo *sinfo = CTX_wm_space_info(C);
	ARegion *ar = CTX_wm_region(C);
	ReportList *reports = CTX_wm_reports(C);
	Report *report;

	/* uses opengl */
	wmSubWindowSet(CTX_wm_window(C), ar->swinid);
	
	report = info_text_pick(sinfo, ar, reports, event->mval[1]);

	RNA_int_set(op->ptr, "report_index", BLI_findindex(&reports->list, report));

	return select_report_pick_exec(C, op);
}
开发者ID:danielmarg，项目名称:blender-main，代码行数:16，代码来源:info_report.c


示例16: edbm_bevel_numinput_set_value

static void edbm_bevel_numinput_set_value(wmOperator *op)
{
	BevelData *opdata = op->customdata;
	float value;
	int vmode;

	vmode = opdata->value_mode;
	value = (vmode == SEGMENTS_VALUE) ?
		opdata->segments : RNA_float_get(op->ptr, value_rna_name[vmode]);
	applyNumInput(&opdata->num_input[vmode], &value);
	CLAMP(value, value_clamp_min[vmode], value_clamp_max[vmode]);
	if (vmode == SEGMENTS_VALUE) {
		opdata->segments = value;
		RNA_int_set(op->ptr, "segments", (int)value);
	}
	else {
		RNA_float_set(op->ptr, value_rna_name[vmode], value);
	}
}
开发者ID:wisaac407，项目名称:blender，代码行数:19，代码来源:editmesh_bevel.c


示例17: ed_marker_move_invoke

static int ed_marker_move_invoke(bContext *C, wmOperator *op, const wmEvent *event)
{
	if (ed_marker_move_init(C, op)) {
		MarkerMove *mm = op->customdata;
		
		mm->evtx = event->x;
		mm->firstx = event->x;
		mm->event_type = event->type;
		
		/* add temp handler */
		WM_event_add_modal_handler(C, op);
		
		/* reset frs delta */
		RNA_int_set(op->ptr, "frames", 0);
		
		return OPERATOR_RUNNING_MODAL;
	}
	
	return OPERATOR_CANCELLED;
}
开发者ID:JasonWilkins，项目名称:blender-wayland，代码行数:20，代码来源:anim_markers.c


示例18: change_frame_modal

/* Modal event handling of frame changing */
static int change_frame_modal(bContext *C, wmOperator *op, const wmEvent *event)
{
	int ret = OPERATOR_RUNNING_MODAL;
	/* execute the events */
	switch (event->type) {
		case ESCKEY:
			ret = OPERATOR_FINISHED;
			break;

		case MOUSEMOVE:
			RNA_int_set(op->ptr, "frame", frame_from_event(C, event));
			change_frame_apply(C, op);
			break;
		
		case LEFTMOUSE: 
		case RIGHTMOUSE:
		case MIDDLEMOUSE:
			/* we check for either mouse-button to end, as checking for ACTIONMOUSE (which is used to init 
			 * the modal op) doesn't work for some reason
			 */
			if (event->val == KM_RELEASE)
				ret = OPERATOR_FINISHED;
			break;

		case LEFTCTRLKEY:
		case RIGHTCTRLKEY:
			if (event->val == KM_RELEASE) {
				RNA_boolean_set(op->ptr, "snap", false);
			}
			else if (event->val == KM_PRESS) {
				RNA_boolean_set(op->ptr, "snap", true);
			}
			break;
	}

	if (ret != OPERATOR_RUNNING_MODAL) {
		change_frame_seq_preview_end(C);
	}

	return ret;
}
开发者ID:UPBGE，项目名称:blender，代码行数:42，代码来源:anim_ops.c


示例19: edbm_bevel_mouse_set_value

static void edbm_bevel_mouse_set_value(wmOperator *op, const wmEvent *event)
{
  BevelData *opdata = op->customdata;
  int vmode = opdata->value_mode;
  float mdiff[2];
  float value;

  mdiff[0] = opdata->mcenter[0] - event->mval[0];
  mdiff[1] = opdata->mcenter[1] - event->mval[1];

  value = ((len_v2(mdiff) - MVAL_PIXEL_MARGIN) - opdata->initial_length[vmode]);

  /* Scale according to value mode */
  value = value_start[vmode] + value * opdata->scale[vmode];

  /* Fake shift-transform... */
  if (event->shift) {
    if (opdata->shift_value[vmode] < 0.0f) {
      opdata->shift_value[vmode] = (vmode == SEGMENTS_VALUE) ?
                                       opdata->segments :
                                       RNA_float_get(op->ptr, value_rna_name[vmode]);
    }
    value = (value - opdata->shift_value[vmode]) * 0.1f + opdata->shift_value[vmode];
  }
  else if (opdata->shift_value[vmode] >= 0.0f) {
    opdata->shift_value[vmode] = -1.0f;
  }

  /* clamp accordingto value mode, and store value back */
  CLAMP(value, value_clamp_min[vmode], value_clamp_max[vmode]);
  if (vmode == SEGMENTS_VALUE) {
    opdata->segments = value;
    RNA_int_set(op->ptr, "segments", (int)(value + 0.5f));
  }
  else {
    RNA_float_set(op->ptr, value_rna_name[vmode], value);
  }
}
开发者ID:dfelinto，项目名称:blender，代码行数:38，代码来源:editmesh_bevel.c


示例20: sequencer_keymap


//.........这里部分代码省略.........
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_strip_jump", PAGEUPKEY, KM_PRESS, 0, 0);
	RNA_boolean_set(kmi->ptr, "next", true);
	RNA_boolean_set(kmi->ptr, "center", false);
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_strip_jump", PAGEDOWNKEY, KM_PRESS, 0, 0);
	RNA_boolean_set(kmi->ptr, "next", false);
	RNA_boolean_set(kmi->ptr, "center", false);

	/* alt for center */
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_strip_jump", PAGEUPKEY, KM_PRESS, KM_ALT, 0);
	RNA_boolean_set(kmi->ptr, "next", true);
	RNA_boolean_set(kmi->ptr, "center", true);
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_strip_jump", PAGEDOWNKEY, KM_PRESS, KM_ALT, 0);
	RNA_boolean_set(kmi->ptr, "next", false);
	RNA_boolean_set(kmi->ptr, "center", true);

	RNA_enum_set(WM_keymap_add_item(keymap, "SEQUENCER_OT_swap", LEFTARROWKEY, KM_PRESS, KM_ALT, 0)->ptr, "side", SEQ_SIDE_LEFT);
	RNA_enum_set(WM_keymap_add_item(keymap, "SEQUENCER_OT_swap", RIGHTARROWKEY, KM_PRESS, KM_ALT, 0)->ptr, "side", SEQ_SIDE_RIGHT);

	RNA_boolean_set(WM_keymap_add_item(keymap, "SEQUENCER_OT_gap_remove", BACKSPACEKEY, KM_PRESS, 0, 0)->ptr, "all", false);
	RNA_boolean_set(WM_keymap_add_item(keymap, "SEQUENCER_OT_gap_remove", BACKSPACEKEY, KM_PRESS, KM_SHIFT, 0)->ptr, "all", true);
	WM_keymap_add_item(keymap, "SEQUENCER_OT_gap_insert", EQUALKEY, KM_PRESS, KM_SHIFT, 0);
	
	WM_keymap_add_item(keymap, "SEQUENCER_OT_snap", SKEY, KM_PRESS, KM_SHIFT, 0);
	WM_keymap_add_item(keymap, "SEQUENCER_OT_swap_inputs", SKEY, KM_PRESS, KM_ALT, 0);

	/* multicam editing keyboard layout, switch to camera 1-10 using
	 * regular number keys */
	{
		int keys[] = { ONEKEY, TWOKEY, THREEKEY, FOURKEY, FIVEKEY,
			           SIXKEY, SEVENKEY, EIGHTKEY, NINEKEY, ZEROKEY };
		int i;

		for (i = 1; i <= 10; i++) {
			RNA_int_set(WM_keymap_add_item(keymap, "SEQUENCER_OT_cut_multicam", keys[i - 1], KM_PRESS, 0, 0)->ptr, "camera", i);
		}
	}

	/* Mouse selection, a bit verbose :/ */
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_select", SELECTMOUSE, KM_PRESS, 0, 0);
	RNA_boolean_set(kmi->ptr, "extend", false);
	RNA_boolean_set(kmi->ptr, "linked_handle", false);
	RNA_enum_set(kmi->ptr, "left_right", SEQ_SELECT_LR_NONE);
	RNA_boolean_set(kmi->ptr, "linked_time", false);
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_select", SELECTMOUSE, KM_PRESS, KM_SHIFT, 0);
	RNA_boolean_set(kmi->ptr, "extend", true);
	RNA_boolean_set(kmi->ptr, "linked_handle", false);
	RNA_enum_set(kmi->ptr, "left_right", SEQ_SELECT_LR_NONE);
	RNA_boolean_set(kmi->ptr, "linked_time", false);


	/* 2.4x method, now use Alt for handles and select the side based on which handle was selected */
#if 0
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_select", SELECTMOUSE, KM_PRESS, KM_CTRL, 0);
	RNA_boolean_set(kmi->ptr, "linked_left", true);
	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_select", SELECTMOUSE, KM_PRESS, KM_ALT, 0);
	RNA_boolean_set(kmi->ptr, "linked_right", true);

	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_select", SELECTMOUSE, KM_PRESS, KM_CTRL | KM_ALT, 0);
	RNA_boolean_set(kmi->ptr, "linked_left", true);
	RNA_boolean_set(kmi->ptr, "linked_right", true);

	kmi = WM_keymap_add_item(keymap, "SEQUENCER_OT_select", SELECTMOUSE, KM_PRESS, KM_SHIFT | KM_CTRL | KM_ALT, 0);
	RNA_boolean_set(kmi->ptr, "extend", true);
	RNA_boolean_set(kmi->ptr, "linked_left", true);
	RNA_boolean_set(kmi->ptr, "linked_right", true);
开发者ID:DrangPo，项目名称:blender，代码行数:66，代码来源:sequencer_ops.c



注：本文中的RNA_int_set函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RNA_pointer_create函数代码示例发布时间：2022-05-30
下一篇：
C++ RNA_float_set函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap