C++ RMAddr函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中RMAddr函数的典型用法代码示例。如果您正苦于以下问题：C++ RMAddr函数的具体用法？C++ RMAddr怎么用？C++ RMAddr使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了RMAddr函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: RMAddr

BX_CPU_C::Resolve64Mod0Base2(bxInstruction_c *i)
{
  if (i->sibIndex() != 4)
    RMAddr(i) = RDX + (BX_READ_64BIT_REG(i->sibIndex()) << i->sibScale());
  else
    RMAddr(i) = RDX;
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:7，代码来源:resolve64.cpp

示例2: BX_CPP_AttrRegparmN

void BX_CPP_AttrRegparmN(1) BX_CPU_C::XADD_EwGwM(bxInstruction_c *i)
{
#if BX_CPU_LEVEL >= 4
  Bit16u op1_16, op2_16, sum_16;

  /* XADD dst(r/m), src(r)
   * temp <-- src + dst         | sum = op2 + op1
   * src  <-- dst               | op2 = op1
   * dst  <-- tmp               | op1 = sum
   */

  BX_CPU_CALL_METHODR(i->ResolveModrm, (i));

  op1_16 = read_RMW_virtual_word(i->seg(), RMAddr(i));
  op2_16 = BX_READ_16BIT_REG(i->nnn());
  sum_16 = op1_16 + op2_16;
  write_RMW_virtual_word(sum_16);

  /* and write destination into source */
  BX_WRITE_16BIT_REG(i->nnn(), op1_16);

  SET_FLAGS_OSZAPC_ADD_16(op1_16, op2_16, sum_16);
#else
  BX_INFO(("XADD_EwGw: not supported on < 80486"));
  UndefinedOpcode(i);
#endif
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:27，代码来源:arith16.cpp

示例3: BX_CPP_AttrRegparmN

/* DB /7 */
void BX_CPP_AttrRegparmN(1) BX_CPU_C::FSTP_EXTENDED_REAL(bxInstruction_c *i)
{
#if BX_SUPPORT_FPU
  BX_CPU_THIS_PTR prepareFPU(i);

  clear_C1();

  floatx80 save_reg = floatx80_default_nan; /* The masked response */

  if (IS_TAG_EMPTY(0))
  {
     BX_CPU_THIS_PTR FPU_exception(FPU_EX_Stack_Underflow);

     if (! (BX_CPU_THIS_PTR the_i387.is_IA_masked()))
        return;
  }
  else
  {
     save_reg = BX_READ_FPU_REG(0);
  }

  write_virtual_tword(i->seg(), RMAddr(i), &save_reg);

  BX_CPU_THIS_PTR the_i387.FPU_pop();
#else
  BX_INFO(("FSTP_EXTENDED_REAL: required FPU, configure --enable-fpu"));
#endif
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:29，代码来源:fpu_load_store.cpp

示例4: BX_CPP_AttrRegparmN

/* 0F 0F /r 0D */
void BX_CPP_AttrRegparmN(1) BX_CPU_C::PI2FD_PqQq(bxInstruction_c *i)
{
  BxPackedMmxRegister result, op;

  BX_CPU_THIS_PTR prepareMMX();

  /* op is a register or memory reference */
  if (i->modC0()) {
    op = BX_READ_MMX_REG(i->rm());
  }
  else {
    BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
    /* pointer, segment address pair */
    MMXUQ(op) = read_virtual_qword(i->seg(), RMAddr(i));
  }

  float_status_t status_word;
  prepare_softfloat_status_word(status_word, float_round_to_zero);

  MMXUD0(result) =
        int32_to_float32(MMXSD0(op), status_word);
  MMXUD1(result) =
        int32_to_float32(MMXSD1(op), status_word);

  /* now write result back to destination */
  BX_WRITE_MMX_REG(i->nnn(), result);
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:28，代码来源:3dnow.cpp

示例5: BX_READ_64BIT_REG

void BX_CPU_C::BSR_GqEq(bxInstruction_c *i)
{
  /* for 64 bit operand size mode */
  Bit64u op1_64, op2_64;

  /* op2_64 is a register or memory reference */
  if (i->modC0()) {
    op2_64 = BX_READ_64BIT_REG(i->rm());
  }
  else {
    /* pointer, segment address pair */
    read_virtual_qword(i->seg(), RMAddr(i), &op2_64);
  }

  if (op2_64 == 0) {
    assert_ZF(); /* op1_64 undefined */
    return;
  }

  op1_64 = 63;
  while ( (op2_64 & BX_CONST64(0x8000000000000000)) == 0 ) {
    op1_64--;
    op2_64 <<= 1;
  }

  SET_FLAGS_OSZAPC_RESULT_64(op1_64, BX_INSTR_BITSCAN64);
  
  /* now write result back to destination */
  BX_WRITE_64BIT_REG(i->nnn(), op1_64);
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:30，代码来源:bit.cpp

示例6: BX_READ_32BIT_REG

void BX_CPU_C::BSR_GdEd(bxInstruction_c *i)
{
  /* for 32 bit operand size mode */
  Bit32u op1_32, op2_32;

  /* op2_32 is a register or memory reference */
  if (i->modC0()) {
    op2_32 = BX_READ_32BIT_REG(i->rm());
  }
  else {
    /* pointer, segment address pair */
    read_virtual_dword(i->seg(), RMAddr(i), &op2_32);
  }

  if (op2_32 == 0) {
    assert_ZF(); /* op1_32 undefined */
    return;
  }

  op1_32 = 31;
  while ( (op2_32 & 0x80000000) == 0 ) {
    op1_32--;
    op2_32 <<= 1;
  }

  SET_FLAGS_OSZAPC_RESULT_32(op1_32, BX_INSTR_BITSCAN32);

  /* now write result back to destination */
  BX_WRITE_32BIT_REGZ(i->nnn(), op1_32);
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:30，代码来源:bit.cpp

示例7: BX_READ_16BIT_REG

void BX_CPU_C::BSR_GwEw(bxInstruction_c *i)
{
  Bit16u op1_16, op2_16;

  /* op2_16 is a register or memory reference */
  if (i->modC0()) {
    op2_16 = BX_READ_16BIT_REG(i->rm());
  }
  else {
    /* pointer, segment address pair */
    read_virtual_word(i->seg(), RMAddr(i), &op2_16);
  }

  if (op2_16 == 0) {
    assert_ZF(); /* op1_16 undefined */
    return;
  }

  op1_16 = 15;
  while ( (op2_16 & 0x8000) == 0 ) {
    op1_16--;
    op2_16 <<= 1;
  }

  SET_FLAGS_OSZAPC_RESULT_16(op1_16, BX_INSTR_BITSCAN16);

  /* now write result back to destination */
  BX_WRITE_16BIT_REG(i->nnn(), op1_16);
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:29，代码来源:bit.cpp

示例8: BX_DEBUG

void BX_CPU_C::LDS_GwMp(bxInstruction_c *i)
{
  if (i->modC0()) {
    BX_DEBUG(("LDS_GwMp: invalid use of LDS, must be memory reference!"));
    UndefinedOpcode(i);
  }

  Bit16u reg_16, ds;

  read_virtual_word(i->seg(), RMAddr(i), &reg_16);
  read_virtual_word(i->seg(), RMAddr(i) + 2, &ds);

  load_seg_reg(&BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS], ds);

  BX_WRITE_16BIT_REG(i->nnn(), reg_16);
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:16，代码来源:segment_ctrl.cpp

示例9: BX_CPP_AttrRegparmN

void BX_CPP_AttrRegparmN(1) BX_CPU_C::MOV_SwEw(bxInstruction_c *i)
{
  Bit16u op2_16;

  /* Attempt to load CS or nonexisting segment register */
  if (i->nnn() >= 6 || i->nnn() == BX_SEG_REG_CS) {
    BX_INFO(("MOV_EwSw: can't use this segment register %d", i->nnn()));
    UndefinedOpcode(i);
  }

  if (i->modC0()) {
    op2_16 = BX_READ_16BIT_REG(i->rm());
  }
  else {
    BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
    /* pointer, segment address pair */
    op2_16 = read_virtual_word(i->seg(), RMAddr(i));
  }

  load_seg_reg(&BX_CPU_THIS_PTR sregs[i->nnn()], op2_16);

  if (i->nnn() == BX_SEG_REG_SS) {
    // MOV SS inhibits interrupts, debug exceptions and single-step
    // trap exceptions until the execution boundary following the
    // next instruction is reached.
    // Same code as POP_SS()
    BX_CPU_THIS_PTR inhibit_mask |= BX_INHIBIT_INTERRUPTS | BX_INHIBIT_DEBUG;
    BX_CPU_THIS_PTR async_event = 1;
  }
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:30，代码来源:data_xfer16.cpp

示例10: BX_CPP_AttrRegparmN

BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::FCOM_DOUBLE_REAL(bxInstruction_c *i)
{
  BX_CPU_THIS_PTR prepareFPU(i);

  int pop_stack = i->nnn() & 1, rc;

  RMAddr(i) = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
  float64 load_reg = read_virtual_qword(i->seg(), RMAddr(i));

  BX_CPU_THIS_PTR FPU_update_last_instruction(i);

  clear_C1();

  if (IS_TAG_EMPTY(0))
  {
      FPU_exception(FPU_EX_Stack_Underflow);
      setcc(FPU_SW_C0|FPU_SW_C2|FPU_SW_C3);

      if(BX_CPU_THIS_PTR the_i387.is_IA_masked())
      {
          if (pop_stack)
              BX_CPU_THIS_PTR the_i387.FPU_pop();
      }
      BX_NEXT_INSTR(i);
  }

  float_status_t status =
      FPU_pre_exception_handling(BX_CPU_THIS_PTR the_i387.get_control_word());

  floatx80 a = BX_READ_FPU_REG(0);

  if (floatx80_is_nan(a) || floatx80_is_unsupported(a) || float64_is_nan(load_reg)) {
    rc = float_relation_unordered;
    float_raise(status, float_flag_invalid);
  }
  else {
    rc = floatx80_compare(a, float64_to_floatx80(load_reg, status), status);
  }
  setcc(status_word_flags_fpu_compare(rc));

  if (! FPU_exception(status.float_exception_flags)) {
     if (pop_stack)
         BX_CPU_THIS_PTR the_i387.FPU_pop();
  }

  BX_NEXT_INSTR(i);
}

开发者ID:iver6，项目名称:BA，代码行数:47，代码来源:fpu_compare.cpp

示例11: BX_CPP_AttrRegparmN

/* 66 0F 3A 62 */
void BX_CPP_AttrRegparmN(1) BX_CPU_C::PCMPISTRM_VdqWdqIb(bxInstruction_c *i)
{
#if (BX_SUPPORT_SSE >= 5) || (BX_SUPPORT_SSE >= 4 && BX_SUPPORT_SSE_EXTENSION > 0)
    BX_CPU_THIS_PTR prepareSSE();

    BxPackedXmmRegister op1 = BX_READ_XMM_REG(i->nnn()), op2, result;
    Bit8u imm8 = i->Ib();

    /* op2 is a register or memory reference */
    if (i->modC0()) {
        op2 = BX_READ_XMM_REG(i->rm());
    }
    else {
        BX_CPU_CALL_METHODR(i->ResolveModrm, (i));
        /* pointer, segment address pair */
        readVirtualDQwordAligned(i->seg(), RMAddr(i), (Bit8u *) &op2);
    }

    // compare all pairs of Ai, Bj
    bx_bool BoolRes[16][16];
    compare_strings(BoolRes, op1, op2, imm8);

    unsigned num_elements = (imm8 & 0x1) ? 8 : 16;
    unsigned len1 = find_eos(op1, imm8);
    unsigned len2 = find_eos(op2, imm8);
    Bit16u result2 = aggregate(BoolRes, len1, len2, imm8);

    // As defined by imm8[6], result2 is then either stored to the least
    // significant bits of XMM0 (zero extended to 128 bits) or expanded
    // into a byte/word-mask and then stored to XMM0
    if (imm8 & 0x40) {
        if (num_elements == 8) {
            for (int index = 0; index < 8; index++)
                result.xmm16u(index) = (result2 & (1<<index)) ? 0xffff : 0;
        }
        else {  // num_elements = 16
            for (int index = 0; index < 16; index++)
                result.xmmubyte(index) = (result2 & (1<<index)) ? 0xff : 0;
        }
    }
    else {
        result.xmm64u(1) = 0;
        result.xmm64u(0) = (Bit64u) result2;
    }

    Bit32u flags = 0;
    if (result2 != 0) flags |= EFlagsCFMask;
    if (len1 < num_elements) flags |= EFlagsSFMask;
    if (len2 < num_elements) flags |= EFlagsZFMask;
    if (result2 & 0x1)
        flags |= EFlagsOFMask;
    setEFlagsOSZAPC(flags);

    BX_WRITE_XMM_REG(0, result); /* store result XMM0 */
#else
    BX_INFO(("PCMPISTRM_VdqWdqIb: required SSE4.2, use --enable-sse and --enable-sse-extension options"));
    UndefinedOpcode(i);
#endif
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:60，代码来源:sse_string.cpp

示例12: BX_CPP_AttrRegparmN

void BX_CPP_AttrRegparmN(1) BX_CPU_C::PUSH_EdM(bxInstruction_c *i)
{
  BX_CPU_CALL_METHODR(i->ResolveModrm, (i));

  Bit32u op1_32 = read_virtual_dword(i->seg(), RMAddr(i));

  push_32(op1_32);
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:8，代码来源:stack32.cpp

示例13: BX_CPP_AttrRegparmN

BX_INSF_TYPE BX_CPP_AttrRegparmN(1) BX_CPU_C::FIST_DWORD_INTEGER(bxInstruction_c *i)
{
  BX_CPU_THIS_PTR prepareFPU(i);

  RMAddr(i) = BX_CPU_CALL_METHODR(i->ResolveModrm, (i));

  FPU_update_last_instruction(i);

  Bit16u x87_sw = FPU_PARTIAL_STATUS;

  Bit32s save_reg = int32_indefinite; /* The masked response */

  int pop_stack = i->nnn() & 1;

  clear_C1();

  if (IS_TAG_EMPTY(0))
  {
     FPU_exception(FPU_EX_Stack_Underflow);

     if (! BX_CPU_THIS_PTR the_i387.is_IA_masked())
        BX_NEXT_INSTR(i);
  }
  else
  {
     float_status_t status =
         FPU_pre_exception_handling(BX_CPU_THIS_PTR the_i387.get_control_word());

     save_reg = floatx80_to_int32(BX_READ_FPU_REG(0), status);

     if (FPU_exception(status.float_exception_flags, 1))
         BX_NEXT_INSTR(i);
  }

  // store to the memory might generate an exception, in this case origial FPU_SW must be kept
  swap_values16u(x87_sw, FPU_PARTIAL_STATUS);

  write_virtual_dword(i->seg(), RMAddr(i), (Bit32u)(save_reg));

  FPU_PARTIAL_STATUS = x87_sw;
  if (pop_stack)
     BX_CPU_THIS_PTR the_i387.FPU_pop();

  BX_NEXT_INSTR(i);
}

开发者ID:iver6，项目名称:BA，代码行数:45，代码来源:fpu_load_store.cpp

示例14: BX_CPP_AttrRegparmN

void BX_CPP_AttrRegparmN(1) BX_CPU_C::NOT_EqM(bxInstruction_c *i)
{
  Bit64u op1_64;

  BX_CPU_CALL_METHODR(i->ResolveModrm, (i));

  op1_64 = read_RMW_virtual_qword_64(i->seg(), RMAddr(i));
  op1_64 = ~op1_64;
  write_RMW_virtual_qword(op1_64);
}

开发者ID:hack477，项目名称:bochs4wii，代码行数:10，代码来源:logical64.cpp

示例15: BX_INFO

void BX_CPU_C::LEA_GdM(bxInstruction_c *i)
{
  if (i->modC0()) {
    BX_INFO(("LEA_GdM: op2 is a register"));
    UndefinedOpcode(i);
  }

  /* write effective address of op2 in op1 */
  BX_WRITE_32BIT_REGZ(i->nnn(), RMAddr(i));
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:10，代码来源:data_xfer32.cpp

示例16: BX_WRITE_8BIT_REGx

void BX_CPU_C::MOV_EbIb(bxInstruction_c *i)
{
  Bit8u op2 = i->Ib();

  if (i->modC0()) {
    BX_WRITE_8BIT_REGx(i->rm(), i->extend8bitL(), op2);
  }
  else {
    write_virtual_byte(i->seg(), RMAddr(i), &op2);
  }
}

开发者ID:ralvaradoc，项目名称:libsf，代码行数:11，代码来源:data_xfer8.cpp

注：本文中的RMAddr函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。