• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RGN_FRAC函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RGN_FRAC函数的典型用法代码示例。如果您正苦于以下问题：C++ RGN_FRAC函数的具体用法？C++ RGN_FRAC怎么用？C++ RGN_FRAC使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RGN_FRAC函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: STEP8

static const UINT32 pts_4bits_layout_xoffset[64] =
{
	STEP8( 0*256, 4 ), STEP8( 1*256, 4 ), STEP8( 4*256, 4 ), STEP8( 5*256, 4 ),
	STEP8( 16*256, 4 ), STEP8( 17*256, 4 ), STEP8( 20*256, 4 ), STEP8( 21*256, 4 )
};

static const UINT32 pts_4bits_layout_yoffset[64] =
{
	STEP8( 0*256, 8*4 ), STEP8( 2*256, 8*4 ), STEP8( 8*256, 8*4 ), STEP8( 10*256, 8*4 ),
	STEP8( 32*256, 8*4 ), STEP8( 34*256, 8*4 ), STEP8( 40*256, 8*4 ), STEP8( 42*256, 8*4 )
};

static const gfx_layout pts_8x8_4bits_layout =
{
	8,8,	      /* 8*8 pixels */
	RGN_FRAC(1,1),        /* 65536 patterns */
	4,	          /* 4 bits per pixel */
	{ 0, 1, 2, 3 },
	EXTENDED_XOFFS,
	EXTENDED_YOFFS,
	8*8*4,
	pts_4bits_layout_xoffset,
	pts_4bits_layout_yoffset
};

static const gfx_layout pts_16x16_4bits_layout =
{
	16,16,        /* 16*16 pixels */
	RGN_FRAC(1,1),        /* 16384 patterns */
	4,	          /* 4 bits per pixel */
	{ 0, 1, 2, 3 },
开发者ID:vikke，项目名称:mame_0145，代码行数:31，代码来源:namcond1.c


示例2: PORT_BIT

	PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_COCKTAIL
	PORT_BIT( 0xc0, IP_ACTIVE_HIGH, IPT_UNKNOWN )
INPUT_PORTS_END



/*************************************
 *
 *  Graphics layouts
 *
 *************************************/

static const gfx_layout charlayout =
{
	8,8,
	RGN_FRAC(1,2),
	4,
	{ RGN_FRAC(1,2),RGN_FRAC(1,2)+4, 0,4 },
	{ STEP4(0,1), STEP4(8,1) },
	{ STEP8(0,16) },
	8*8*2
};


static const gfx_layout spritelayout =
{
	16,16,
	RGN_FRAC(1,3),
	3,
	{ RGN_FRAC(0,3), RGN_FRAC(1,3), RGN_FRAC(2,3) },
	{ STEP8(0,1), STEP8(8*8,1) },
开发者ID:Robbbert，项目名称:store1，代码行数:31，代码来源:suprridr.cpp


示例3: PORT_DIPSETTING

	PORT_DIPSETTING(    0x00, "5" )
	PORT_DIPSETTING(    0x20, "7" )
	PORT_DIPSETTING(    0x30, "9" )
	PORT_DIPNAME( 0x40, 0x00, DEF_STR( Demo_Sounds ) )	PORT_DIPLOCATION("SW2:7")
	PORT_DIPSETTING(    0x40, DEF_STR( Off ) )
	PORT_DIPSETTING(    0x00, DEF_STR( On ) )
	PORT_DIPNAME( 0x80, 0x80, "Stereo Sound" )		PORT_DIPLOCATION("SW2:8")
	PORT_DIPSETTING(    0x80, DEF_STR( Off ) )
	PORT_DIPSETTING(    0x00, DEF_STR( On ) )
INPUT_PORTS_END


static const gfx_layout tile_layout =
{
	16,16,
	RGN_FRAC(1,1),
	4,
	{ 0, 1, 2, 3 },
	{
		0*4,1*4,2*4,3*4,4*4,5*4,6*4,7*4,
		8*32+0*4,8*32+1*4,8*32+2*4,8*32+3*4,8*32+4*4,8*32+5*4,8*32+6*4,8*32+7*4
	},
	{
		0*32,1*32,2*32,3*32,4*32,5*32,6*32,7*32,
		16*32+0*32,16*32+1*32,16*32+2*32,16*32+3*32,16*32+4*32,16*32+5*32,16*32+6*32,16*32+7*32
	},
	4*8*32
};

static GFXDECODE_START( djboy )
	GFXDECODE_ENTRY( "gfx1", 0, tile_layout, 0x100, 16 ) /* sprite bank */
开发者ID:j4y4r，项目名称:j4ymame，代码行数:31，代码来源:djboy.c


示例4: PORT_DIPSETTING

	PORT_DIPSETTING(    0x00, DEF_STR( On ) )
	PORT_DIPNAME( 0x08, 0x08, "Coin Mode" )
	PORT_DIPSETTING(    0x08, "1" )
	PORT_DIPSETTING(    0x00, "2" )
	/* Coin Mode 1 */
	IREM_COIN_MODE_1_NEW
	/* Coin Mode 2, not supported yet */
//	IREM_COIN_MODE_2
INPUT_PORTS_END

/*****************************************************************************/

static struct GfxLayout charlayout =
{
	8,8,
	RGN_FRAC(1,4),
	4,
	{ RGN_FRAC(3,4), RGN_FRAC(2,4), RGN_FRAC(1,4), RGN_FRAC(0,4) },
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
	8*8
};

static struct GfxLayout spritelayout =
{
	16,16,
	RGN_FRAC(1,4),
	4,
	{ RGN_FRAC(3,4), RGN_FRAC(2,4), RGN_FRAC(1,4), RGN_FRAC(0,4) },
	{ 0, 1, 2, 3, 4, 5, 6, 7,
		16*8+0, 16*8+1, 16*8+2, 16*8+3, 16*8+4, 16*8+5, 16*8+6, 16*8+7 },
开发者ID:joolswills，项目名称:mameox，代码行数:31，代码来源:m90.c


示例5: PORT_DIPSETTING

	PORT_DIPSETTING(    0x0c, DEF_STR( Easy ) )
	PORT_DIPSETTING(    0x08, DEF_STR( Normal ) )
	PORT_DIPSETTING(    0x04, DEF_STR( Hard ) )
//  PORT_DIPSETTING(    0x00, DEF_STR( Hard ) )
	PORT_DIPNAME( 0x02, 0x02, "Bonus Time" )
	PORT_DIPSETTING(    0x00, "*2 +30" )
	PORT_DIPSETTING(    0x02, "*2 +50" )
	PORT_SERVICE( 0x01, IP_ACTIVE_LOW )
INPUT_PORTS_END



static const gfx_layout charlayout =
{
	8,8,
	RGN_FRAC(1,4),
	8,
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{   RGN_FRAC(3,4)+0, RGN_FRAC(2,4)+0, RGN_FRAC(1,4)+0, RGN_FRAC(0,4)+0,
		RGN_FRAC(3,4)+8, RGN_FRAC(2,4)+8, RGN_FRAC(1,4)+8, RGN_FRAC(0,4)+8 },
	{ 0*16, 1*16, 2*16, 3*16, 4*16, 5*16, 6*16, 7*16 },
	16*8
};

static GFXDECODE_START( mosaic )
	GFXDECODE_ENTRY( "gfx1", 0, charlayout, 0, 1 )
	GFXDECODE_ENTRY( "gfx2", 0, charlayout, 0, 1 )
GFXDECODE_END
开发者ID:jiangzhonghui，项目名称:mame，代码行数:28，代码来源:mosaic.c


示例6: RGN_FRAC

{
	8, 8,                   /* 8 x 8 characters */
	512,                    /* 512 characters */
	1,                  /* 1 bits per pixel */
	{ 0 },                  /* no bitplanes */
	/* x offsets */
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	/* y offsets */
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
	8*8                 /* every char takes 8 bytes */
};

static const gfx_layout kanji_layout =
{
	16, 16,                 /* 8 x 8 characters */
	RGN_FRAC(1,1),                  /* 512 characters */
	1,                  /* 1 bits per pixel */
	{ 0 },                  /* no bitplanes */
	/* x offsets */
	{ STEP16(0,1) },
	/* y offsets */
	{ STEP16(0,16) },
	16*16                   /* every char takes 8 bytes */
};

static GFXDECODE_START( pcjr )
	GFXDECODE_ENTRY( "gfx1", 0x0000, pc_8_charlayout, 3, 1 )
GFXDECODE_END


static ADDRESS_MAP_START(ibmpcjr_map, AS_PROGRAM, 8, pcjr_state)
开发者ID:keshbach，项目名称:mame，代码行数:31，代码来源:ibmpcjr.cpp


示例7: PORT_BIT

	PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(1)
	PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 )
	PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x1000, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2)
	PORT_BIT( 0x2000, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2)
	PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2)
	PORT_BIT( 0x8000, IP_ACTIVE_LOW, IPT_START2 )
INPUT_PORTS_END

static const gfx_layout tile_8x8_layout =
{
	8,8,
	RGN_FRAC(1,2),
	4,
	{ RGN_FRAC(1,2)+8,RGN_FRAC(1,2)+0,RGN_FRAC(0,2)+8,RGN_FRAC(0,2)+0 },
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*16, 1*16, 2*16, 3*16, 4*16, 5*16, 6*16, 7*16 },
	8*16
};

static const gfx_layout tile_16x16_layout =
{
	16,16,
	RGN_FRAC(1,2),
	4,
	{ RGN_FRAC(1,2)+8,RGN_FRAC(1,2)+0,RGN_FRAC(0,2)+8,RGN_FRAC(0,2)+0 },
	{ 256,257,258,259,260,261,262,263,0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*16, 1*16, 2*16, 3*16, 4*16, 5*16, 6*16, 7*16,8*16,9*16,10*16,11*16,12*16,13*16,14*16,15*16 },
开发者ID:CrouchingLlama，项目名称:openlase-mame，代码行数:31，代码来源:pktgaldx.c


示例8: PORT_BIT

PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SPECIAL ) PORT_COCKTAIL  /* OUT:coin lockout */
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_SPECIAL )    /* OUT:coin counter 1 */
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_SPECIAL )    /* OUT:coin counter 2 */
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("P1 Jump")
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_NAME("P1 Left")
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_NAME("P1 Right")
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_COCKTAIL PORT_NAME("P2 Jump")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_COCKTAIL PORT_NAME("P2 Left")
INPUT_PORTS_END



static const gfx_layout spritelayout =
{
    16,16,
    RGN_FRAC(1,2),
    4,
    { 0, 4, RGN_FRAC(1,2)+0, RGN_FRAC(1,2)+4 },
    { STEP4(0*8,1), STEP4(8*8,1), STEP4(16*8,1), STEP4(24*8,1) },
    { STEP8(0*8,8), STEP8(32*8,8) },
    64*8
};

static const gfx_layout charlayout =
{
    8,8,
    RGN_FRAC(1,1),
    2,
    { 0, 4 },
    { STEP4(8*8,1), STEP4(0*8,1) },
    { STEP8(0*8,8) },
开发者ID:gregdickhudl，项目名称:mame，代码行数:31，代码来源:pacland.cpp


示例9: PORT_MODIFY

	PORT_MODIFY("LIGHT0_Y")
	PORT_BIT( 0xff, 0x80, IPT_LIGHTGUN_Y ) PORT_CROSSHAIR(Y, -1.0, 0.0, 0) PORT_SENSITIVITY(25) PORT_KEYDELTA(15) PORT_PLAYER(1) PORT_REVERSE

	PORT_MODIFY("LIGHT1_X")
	PORT_BIT( 0xff, 0x80, IPT_LIGHTGUN_X ) PORT_CROSSHAIR(X, 1.0, 0.0, 0) PORT_SENSITIVITY(25) PORT_KEYDELTA(15) PORT_PLAYER(2) PORT_REVERSE

	PORT_MODIFY("LIGHT1_Y")
	PORT_BIT( 0xff, 0x80, IPT_LIGHTGUN_Y ) PORT_CROSSHAIR(Y, -1.0, 0.0, 0) PORT_SENSITIVITY(25) PORT_KEYDELTA(15) PORT_PLAYER(2) PORT_REVERSE
INPUT_PORTS_END


static const gfx_layout lethal_6bpp =
{
	16,16,
	RGN_FRAC(1,2),
	6,
	{ RGN_FRAC(1,2)+8,RGN_FRAC(1,2)+0, 8, 0, 24, 16 },
	{ 0, 1, 2, 3, 4, 5, 6, 7,
	8*32+0, 8*32+1, 8*32+2, 8*32+3, 8*32+4, 8*32+5, 8*32+6, 8*32+7 },
	{ 0*32, 1*32, 2*32, 3*32, 4*32, 5*32, 6*32, 7*32,
		16*32, 17*32, 18*32, 19*32, 20*32, 21*32, 22*32, 23*32 },
	128*8
};

/* we use this decode instead of the one done by the sprite video start due to it being 6bpp */
static GFXDECODE_START( lethal )
	GFXDECODE_ENTRY( "gfx2", 0, lethal_6bpp,   0x000/*0x400*/, 256  ) /* sprites tiles */
GFXDECODE_END
开发者ID:cdenix，项目名称:psmame，代码行数:28，代码来源:lethal.c


示例10: PORT_DIPSETTING

	PORT_DIPSETTING(    0x00, DEF_STR( Off ) )
	PORT_DIPSETTING(    0x10, DEF_STR( On ) )
	PORT_DIPNAME( 0x20, 0x20, "Demo Music" )                /* code at 0x6226 - when is it called ? */
	PORT_DIPSETTING(    0x00, DEF_STR( Off ) )
	PORT_DIPSETTING(    0x20, DEF_STR( On ) )
	PORT_DIPNAME( 0x40, 0x40, DEF_STR( Flip_Screen ) )
	PORT_DIPSETTING(    0x40, DEF_STR( Off ) )
	PORT_DIPSETTING(    0x00, DEF_STR( On ) )
	PORT_DIPUNUSED( 0x80, IP_ACTIVE_LOW )
INPUT_PORTS_END


static const gfx_layout charlayout =
{
	8,8,
	RGN_FRAC(1,1),
	2,
	{ 4, 0 },
	{ 0, 1, 2, 3, 8+0, 8+1, 8+2, 8+3 },
	{ 0*16, 1*16, 2*16, 3*16, 4*16, 5*16, 6*16, 7*16 },
	16*8
};

static const gfx_layout spritelayout =
{
	16,16,
	RGN_FRAC(1,2),
	4,
	{ RGN_FRAC(1,2)+4, RGN_FRAC(1,2)+0, 4, 0 },
	{ 0, 1, 2, 3, 8+0, 8+1, 8+2, 8+3,
			32*8+0, 32*8+1, 32*8+2, 32*8+3, 33*8+0, 33*8+1, 33*8+2, 33*8+3 },
开发者ID:DarrenBranford，项目名称:MAME4iOS，代码行数:31，代码来源:higemaru.c


示例11: PORT_START

	PORT_START("DIAL1") // player 2 8-way rotary control - converted in jackalr_rotary_r()
	PORT_BIT( 0xff, 0x00, IPT_POSITIONAL ) PORT_POSITIONS(8) PORT_WRAPS PORT_SENSITIVITY(15) PORT_KEYDELTA(1) PORT_CODE_DEC(KEYCODE_N) PORT_CODE_INC(KEYCODE_M) PORT_PLAYER(2) PORT_FULL_TURN_COUNT(8)
INPUT_PORTS_END


/*************************************
 *
 *  Graphics definitions
 *
 *************************************/

static const gfx_layout charlayout =
{
	8, 8,
	RGN_FRAC(1,4),
	8,  /* 8 bits per pixel (!) */
	{ 0, 1, 2, 3, RGN_FRAC(1,2)+0, RGN_FRAC(1,2)+1, RGN_FRAC(1,2)+2, RGN_FRAC(1,2)+3 },
	{ 0*4, 1*4, 2*4, 3*4, 4*4, 5*4, 6*4, 7*4 },
	{ 0*32, 1*32, 2*32, 3*32, 4*32, 5*32, 6*32, 7*32 },
	32*8
};

static const gfx_layout spritelayout =
{
	16, 16,
	RGN_FRAC(1,4),
	4,
	{ 0, 1, 2, 3 },
	{ 0*4, 1*4, 2*4, 3*4, 4*4, 5*4, 6*4, 7*4,
			32*8+0*4, 32*8+1*4, 32*8+2*4, 32*8+3*4, 32*8+4*4, 32*8+5*4, 32*8+6*4, 32*8+7*4 },
开发者ID:bmunger，项目名称:mame，代码行数:30，代码来源:jackal.cpp


示例12: PORT_INCLUDE

	PORT_INCLUDE( firetrapj )

	PORT_MODIFY("IN2")
	PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_SERVICE1 )
	PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_COIN1 )
	PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN2 )

	PORT_MODIFY("COIN")
	PORT_BIT( 0x07, IP_ACTIVE_LOW, IPT_UNUSED )
INPUT_PORTS_END


static const gfx_layout charlayout =
{
	8,8,
	RGN_FRAC(1,2),
	2,
	{ 0, 4 },
	{ 3, 2, 1, 0, RGN_FRAC(1,2)+3, RGN_FRAC(1,2)+2, RGN_FRAC(1,2)+1, RGN_FRAC(1,2)+0 },
	{ 7*8, 6*8, 5*8, 4*8, 3*8, 2*8, 1*8, 0*8 },
	8*8
};
static const gfx_layout tilelayout =
{
	16,16,
	RGN_FRAC(1,4),
	4,
	{ 0, 4, RGN_FRAC(1,2)+0, RGN_FRAC(1,2)+4 },
	{ 3, 2, 1, 0, RGN_FRAC(1,4)+3, RGN_FRAC(1,4)+2, RGN_FRAC(1,4)+1, RGN_FRAC(1,4)+0,
			16*8+3, 16*8+2, 16*8+1, 16*8+0, RGN_FRAC(1,4)+16*8+3, RGN_FRAC(1,4)+16*8+2, RGN_FRAC(1,4)+16*8+1, RGN_FRAC(1,4)+16*8+0 },
	{ 15*8, 14*8, 13*8, 12*8, 11*8, 10*8, 9*8, 8*8,
开发者ID:MASHinfo，项目名称:mame，代码行数:31，代码来源:firetrap.cpp


示例13: PORT_START

	PORT_START("P2")
	PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_8WAY PORT_PLAYER(2)
	PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(2)
	PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(2)
	PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_UNKNOWN )
	PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_UNKNOWN )
INPUT_PORTS_END


static const gfx_layout oneshot16x16_layout =
{
	16,16,
	RGN_FRAC(1,8),
	8,
	{ RGN_FRAC(0,8),RGN_FRAC(1,8),RGN_FRAC(2,8),RGN_FRAC(3,8),RGN_FRAC(4,8),RGN_FRAC(5,8),RGN_FRAC(6,8),RGN_FRAC(7,8) },
	{ 0,1,2,3,4,5,6,7,
		64+0,64+1,64+2,64+3,64+4,64+5,64+6,64+7 },
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8,
		128+0*8, 128+1*8, 128+2*8, 128+3*8, 128+4*8, 128+5*8, 128+6*8, 128+7*8 },
	16*16
};

static const gfx_layout oneshot8x8_layout =
{
	8,8,
	RGN_FRAC(1,8),
	8,
	{ RGN_FRAC(0,8),RGN_FRAC(1,8),RGN_FRAC(2,8),RGN_FRAC(3,8),RGN_FRAC(4,8),RGN_FRAC(5,8),RGN_FRAC(6,8),RGN_FRAC(7,8) },
开发者ID:crazii，项目名称:mameplus，代码行数:31，代码来源:oneshot.c


示例14: ADDRESS_MAP_START

	return 0;
}

static ADDRESS_MAP_START( tcl_map, AS_PROGRAM, 8, tcl_state )
	AM_RANGE(0x0000, 0x7fff) AM_ROM  /* bfff ? */
ADDRESS_MAP_END


static INPUT_PORTS_START( tcl )
	PORT_START("IN0")
INPUT_PORTS_END

static const gfx_layout charlayout =
{
	8,8,
	RGN_FRAC(1,3),
	3,
	{ 0, RGN_FRAC(1,3), RGN_FRAC(2,3) },
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
	8*8
};

static const gfx_layout charlayout2 =
{
	8,8,
	RGN_FRAC(1,4),
	4,
	{ 0, RGN_FRAC(1,4), RGN_FRAC(2,4), RGN_FRAC(3,4)},
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
开发者ID:CJBass，项目名称:mame2013-libretro，代码行数:31，代码来源:tcl.c


示例15: PORT_DIPSETTING

	PORT_DIPSETTING(          0xe0000000, DEF_STR(1C_1C))
	PORT_DIPSETTING(          0xc0000000, DEF_STR(1C_2C))
	PORT_DIPSETTING(          0xa0000000, DEF_STR(1C_3C))
	PORT_DIPSETTING(          0x80000000, DEF_STR(1C_4C))

//  PORT_START("MISC")  /* Misc inputs */
//  PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_SPECIAL ) /* VBLANK ? */
//  PORT_BIT( 0xff7f, IP_ACTIVE_LOW, IPT_UNUSED ) /* unknown / unused */
INPUT_PORTS_END


/* BACKGROUNDS */
static const gfx_layout tiles16x16x6_layout =
{
	16,16,
	RGN_FRAC(1,3),
	6,
	{ 0x0000000*8+8,0x0000000*8+0,  0x0800000*8+8, 0x0800000*8+0, 0x1000000*8+8,0x1000000*8+0 },
	{ 0, 1, 2, 3, 4, 5, 6, 7, 16, 17, 18, 19, 20, 21, 22, 23 },
	{ 0*32, 1*32, 2*32, 3*32, 4*32, 5*32, 6*32, 7*32, 8*32, 9*32, 10*32, 11*32, 12*32, 13*32, 14*32, 15*32 },
	16*32
};

static GFXDECODE_START( silkroad )
	GFXDECODE_ENTRY( "gfx1", 0, tiles16x16x6_layout,  0x0000, 256 )
GFXDECODE_END

static MACHINE_CONFIG_START( silkroad, silkroad_state )

	/* basic machine hardware */
	MCFG_CPU_ADD("maincpu", M68EC020, XTAL_32MHz/2) /* 16MHz */
开发者ID:jiangzhonghui，项目名称:mame，代码行数:31，代码来源:silkroad.c


示例16: PORT_BIT

	PORT_BIT(0x40,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F2") PORT_CODE(KEYCODE_F2)
	PORT_BIT(0x80,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("F1") PORT_CODE(KEYCODE_F1)

	PORT_START("other")
	PORT_BIT(0x01,IP_ACTIVE_HIGH,IPT_KEYBOARD) PORT_NAME("Break") PORT_CODE(KEYCODE_ESC) PORT_CHANGED_MEMBER(DEVICE_SELF,alphatro_state,alphatro_break,0)

	PORT_START("CONFIG")
	PORT_CONFNAME( 0x20, 0x00, "Monitor")
	PORT_CONFSETTING(    0x00, "RGB")
	PORT_CONFSETTING(    0x20, "Amber")
INPUT_PORTS_END

static const gfx_layout charlayout =
{
	8,16,
	RGN_FRAC(1,1),
	1,
	{ RGN_FRAC(0,1) },
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8, 8*8, 9*8, 10*8, 11*8, 12*8, 13*8, 14*8, 15*8 },
	8*16
};

static GFXDECODE_START( alphatro )
	GFXDECODE_ENTRY( "chargen", 0, charlayout, 0, 4 )
GFXDECODE_END

void alphatro_state::machine_start()
{
	m_sys_timer = timer_alloc(TIMER_SYSTEM);
	m_serial_timer = timer_alloc(TIMER_SERIAL);
开发者ID:felipesanches，项目名称:ume，代码行数:31，代码来源:alphatro.c


示例17: PORT_DIPSETTING

	PORT_DIPSETTING(    0xc0, DEF_STR( 1C_2C ))
	PORT_DIPSETTING(    0x40, DEF_STR( Free_Play ))
INPUT_PORTS_END



/*************************************
 *
 *  Graphics definitions
 *
 *************************************/

static const gfx_layout charlayout =
{
	8,8,
	RGN_FRAC(1,1),
	2,
	{ 0, 4 },
	{ STEP4(8*8,1), STEP4(0,1) },
	{ STEP8(0,8) },
	8*16
};


static const gfx_layout spritelayout =
{
	16,16,
	RGN_FRAC(1,2),
	2,
	{ RGN_FRAC(1,2), 0 },
	{ STEP8(8*16,1), STEP8(0,1) },
开发者ID:Fulg，项目名称:mame，代码行数:31，代码来源:foodf.cpp


示例18: INPUT_PORTS_START

static INPUT_PORTS_START( buccanra )
	PORT_INCLUDE( buccanrs )

	PORT_MODIFY("IN0") /* this port is reversed on this set.. */
	PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START1 )
	PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_START2 )
	PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN1 )
	PORT_SERVICE( 0xf4, IP_ACTIVE_LOW ) // any of these bits while booting will enable service mode
INPUT_PORTS_END


static const gfx_layout text_layout =
{
	8,8, /* tile size */
	RGN_FRAC(1,2), /* number of tiles */
	4, /* bits per pixel */
	{RGN_FRAC(1,2),RGN_FRAC(1,2)+4,0,4}, /* plane offsets */
	{ 0,1,2,3, 64+0,64+1,64+2,64+3 }, /* x offsets */
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 }, /* y offsets */
	128
};

static const gfx_layout sprite_layout =
{
	16,16,	/* tile size */
	RGN_FRAC(1,2),	/* number of sprites ($1000) */
	4,		/* bits per pixel */
	{RGN_FRAC(1,2),RGN_FRAC(1,2)+4,0,4}, /* plane offsets */
	{ /* x offsets */
		0x00*8+0,0x00*8+1,0x00*8+2,0x00*8+3,
开发者ID:nitrologic，项目名称:emu，代码行数:30，代码来源:vigilant.c


示例19: PORT_DIPNAME

	PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) )
	PORT_DIPSETTING(    0x80, DEF_STR( Off ) )
	PORT_DIPSETTING(    0x00, DEF_STR( On ) )
INPUT_PORTS_END


/*************************
*    Graphics Layouts    *
*************************/

static const gfx_layout charlayout =
{
	8, 8,
	0x400,  /* tiles */
	2,      /* 2 bpp */
	{ RGN_FRAC(0,2), RGN_FRAC(1,2) },
	{ 0, 1, 2, 3, 4, 5, 6, 7 },
	{ 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 },
	8*8 /* every char takes 8 consecutive bytes */
};


/******************************
* Graphics Decode Information *
******************************/

static GFXDECODE_START( gfx_jokrwild )
	GFXDECODE_ENTRY( "gfx1", 0, charlayout, 0, 16 )
GFXDECODE_END
开发者ID:PugsyMAME，项目名称:mame，代码行数:29，代码来源:jokrwild.cpp


示例20: PORT_BIT

	PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICKLEFT_DOWN )   PORT_COCKTAIL
	PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICKLEFT_UP )     PORT_COCKTAIL
	PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICKLEFT_LEFT )   PORT_COCKTAIL
	PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICKLEFT_RIGHT )  PORT_COCKTAIL
	PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICKRIGHT_DOWN )  PORT_COCKTAIL
	PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICKRIGHT_UP )    PORT_COCKTAIL
	PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_JOYSTICKRIGHT_LEFT )  PORT_COCKTAIL
	PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_JOYSTICKRIGHT_RIGHT ) PORT_COCKTAIL
INPUT_PORTS_END

/***************************************************************************/

static const gfx_layout tilelayout =
{
	8,8,    /* tile size */
	RGN_FRAC(1,2),  /* number of tiles */
	2,  /* bits per pixel */
	{ 0, 4 }, /* plane offsets */
	{ RGN_FRAC(1,2)+0,  RGN_FRAC(1,2)+1, RGN_FRAC(1,2)+2, RGN_FRAC(1,2)+3, 0,1,2,3 }, /* x offsets */
	{ 0*8,1*8,2*8,3*8, 4*8, 5*8, 6*8, 7*8 }, /* y offsets */
	8*8 /* offset to next tile */
};

static const gfx_layout tile16layout =
{
	16,16,  /* tile size */
	RGN_FRAC(1,4),  /* number of tiles */
	3,  /* bits per pixel */
	{ RGN_FRAC(1,2),0,4 }, /* plane offsets */
	{ 16*8+RGN_FRAC(1,4)+0,16*8+ RGN_FRAC(1,4)+1,16*8+ RGN_FRAC(1,4)+2,16*8+ RGN_FRAC(1,4)+3,
		0,1,2,3,
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:31，代码来源:chanbara.c



注：本文中的RGN_FRAC函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RG_DEF_METHOD函数代码示例发布时间：2022-05-30
下一篇：
C++ RGBColor函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap