C++ RELEASE_NDIS_PACKET函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中RELEASE_NDIS_PACKET函数的典型用法代码示例。如果您正苦于以下问题：C++ RELEASE_NDIS_PACKET函数的具体用法？C++ RELEASE_NDIS_PACKET怎么用？C++ RELEASE_NDIS_PACKET使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了RELEASE_NDIS_PACKET函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: WDS_PacketSend

int WDS_PacketSend(
    IN	PNDIS_PACKET				pSkb,
    IN	PNET_DEV					dev,
    IN	RTMP_NET_PACKET_TRANSMIT	Func)
{
    UCHAR i;
    RTMP_ADAPTER *pAd;
    PNDIS_PACKET pPacket = (PNDIS_PACKET) pSkb;

    pAd = (PRTMP_ADAPTER) RTMP_OS_NETDEV_GET_PRIV(dev);


#ifdef RALINK_ATE
    if (ATE_ON(pAd))
    {
        RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
        return 0;
    }
#endif // RALINK_ATE //

    if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) ||
            (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))          ||
            (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)))
    {
        RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
        return 0;
    }

    if (!(RTMP_OS_NETDEV_STATE_RUNNING(dev)))
    {
        RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
        return 0;
    }

    for (i = 0; i < MAX_WDS_ENTRY; i++)
    {
        if (ValidWdsEntry(pAd, i) && (pAd->WdsTab.WdsEntry[i].dev == dev))
        {
            RTMP_SET_PACKET_NET_DEVICE_WDS(pSkb, i);
            SET_OS_PKT_NETDEV(pSkb, pAd->net_dev);

            return Func(pSkb);
        }
    }


    RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);

    return 0;
}

开发者ID:philenotfound，项目名称:belkin-wemo-linux-2.6.21.x，代码行数:50，代码来源:ap_wds.c

示例2: TxSwQDepthAdjust

VOID TxSwQDepthAdjust(IN RTMP_ADAPTER *pAd, IN UINT32 qLen)
{
	ULONG IrqFlags;
	INT qIdx;
	QUEUE_HEADER *pTxQ, *pEntry;
	PNDIS_PACKET pPacket;

	RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
	pAd->TxSwQMaxLen = qLen;
	for (qIdx = 0; qIdx < NUM_OF_TX_RING; qIdx++)
	{
		pTxQ = &pAd->TxSwQueue[qIdx];
		while(pTxQ->Number >= pAd->TxSwQMaxLen)
		{
			pEntry = RemoveHeadQueue(pTxQ);
			if (pEntry)
			{
				pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
				RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
			}
			else
				break;
		}
	}
	RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);

	DBGPRINT(RT_DEBUG_OFF, ("%s():Set TxSwQMaxLen as %d\n",
			__FUNCTION__, pAd->TxSwQMaxLen));
}

开发者ID:mickeyreg，项目名称:driver，代码行数:29，代码来源:cmm_video.c

示例3: ba_reordering_resource_release

/* 
 * free all resource for reordering mechanism 
 */
void ba_reordering_resource_release(PRTMP_ADAPTER pAd) 
{
	BA_TABLE        *Tab;
	PBA_REC_ENTRY   pBAEntry;
	struct reordering_mpdu *mpdu_blk;
	int i;

	Tab = &pAd->BATable;

	/* I.  release all pending reordering packet */
	NdisAcquireSpinLock(&pAd->BATabLock);
	for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++)
	{
		pBAEntry = &Tab->BARecEntry[i];
		if (pBAEntry->REC_BA_Status != Recipient_NONE)
		{
			while ((mpdu_blk = ba_reordering_mpdu_dequeue(&pBAEntry->list)))
			{
				ASSERT(mpdu_blk->pPacket);
				RELEASE_NDIS_PACKET(pAd, mpdu_blk->pPacket, NDIS_STATUS_FAILURE);
				ba_mpdu_blk_free(pAd, mpdu_blk);
			}           
		}
	}
	NdisReleaseSpinLock(&pAd->BATabLock);

	ASSERT(pBAEntry->list.qlen == 0);
	/* II. free memory of reordering mpdu table */
	NdisAcquireSpinLock(&pAd->mpdu_blk_pool.lock);
	os_free_mem(pAd, pAd->mpdu_blk_pool.mem);
	NdisReleaseSpinLock(&pAd->mpdu_blk_pool.lock);
}

开发者ID:acassis，项目名称:emlinux-ssd1935，代码行数:35，代码来源:ba_action.c

示例4: RTUSBRejectPendingPackets

/*
	========================================================================
	
	Routine Description:

	Arguments:

	Return Value:

	IRQL = 
	
	Note:
	
	========================================================================
*/
VOID	RTUSBRejectPendingPackets(
	IN	PRTMP_ADAPTER	pAd)
{
	UCHAR			Index;
	PQUEUE_ENTRY	pEntry;
	PNDIS_PACKET	pPacket;
	PQUEUE_HEADER	pQueue;
	
#ifdef RELEASE_EXCLUDE
	DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RejectPendingPackets\n"));
#endif // RELEASE_EXCLUDE //

	for (Index = 0; Index < 4; Index++)
	{
		NdisAcquireSpinLock(&pAd->TxSwQueueLock[Index]);
		while (pAd->TxSwQueue[Index].Head != NULL)
		{
			pQueue = (PQUEUE_HEADER) &(pAd->TxSwQueue[Index]);
			pEntry = RemoveHeadQueue(pQueue);
			pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
		}
		NdisReleaseSpinLock(&pAd->TxSwQueueLock[Index]);

	}
#ifdef RELEASE_EXCLUDE
	DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RejectPendingPackets\n"));
#endif // RELEASE_EXCLUDE //

}

开发者ID:vanhoefm，项目名称:rt2870linux，代码行数:45，代码来源:rtusb_data.c

示例5: ba_enqueue_reordering_packet

static void ba_enqueue_reordering_packet(struct rt_rtmp_adapter *pAd,
					 struct rt_ba_rec_entry *pBAEntry,
					 struct rt_rx_blk *pRxBlk,
					 u8 FromWhichBSSID)
{
	struct reordering_mpdu *mpdu_blk;
	u16 Sequence = (u16)pRxBlk->pHeader->Sequence;

	mpdu_blk = ba_mpdu_blk_alloc(pAd);
	if ((mpdu_blk != NULL) && (!RX_BLK_TEST_FLAG(pRxBlk, fRX_EAP))) {
		/* Write RxD buffer address & allocated buffer length */
		NdisAcquireSpinLock(&pBAEntry->RxReRingLock);

		mpdu_blk->Sequence = Sequence;

		mpdu_blk->bAMSDU = RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU);

		convert_reordering_packet_to_preAMSDU_or_802_3_packet(pAd,
								      pRxBlk,
								      FromWhichBSSID);

		STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);

		/* */
		/* it is necessary for reordering packet to record */
		/* which BSS it come from */
		/* */
		RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);

		mpdu_blk->pPacket = pRxBlk->pRxPacket;

		if (ba_reordering_mpdu_insertsorted(&pBAEntry->list, mpdu_blk)
		    == FALSE) {
			/* had been already within reordering list */
			/* don't indicate */
			RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
					    NDIS_STATUS_SUCCESS);
			ba_mpdu_blk_free(pAd, mpdu_blk);
		}

		ASSERT((0 <= pBAEntry->list.qlen)
		       && (pBAEntry->list.qlen <= pBAEntry->BAWinSize));
		NdisReleaseSpinLock(&pBAEntry->RxReRingLock);
	} else {
		DBGPRINT(RT_DEBUG_ERROR,
			 (" (%d) Can't allocate reordering mpdu blk\n",
			  pBAEntry->list.qlen));

		/*
		 * flush all pending reordering mpdus
		 * and receving mpdu to upper layer
		 * make tcp/ip to take care reordering mechanism
		 */
		/*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
		ba_indicate_reordering_mpdus_le_seq(pAd, pBAEntry, Sequence);

		pBAEntry->LastIndSeq = Sequence;
		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
	}
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:60，代码来源:ba_action.c

示例6: client

/*
	========================================================================
	Routine Description:
		This routine is used to do insert packet into power-saveing queue.
	
	Arguments:
		pAd: Pointer to our adapter
		pPacket: Pointer to send packet
		pMacEntry: portint to entry of MacTab. the pMacEntry store attribute of client (STA).
		QueIdx: Priority queue idex.

	Return Value:
		NDIS_STATUS_SUCCESS:If succes to queue the packet into TxSwQueue.
		NDIS_STATUS_FAILURE: If failed to do en-queue.
========================================================================
*/
NDIS_STATUS RtmpInsertPsQueue(
	IN PRTMP_ADAPTER pAd,
	IN PNDIS_PACKET pPacket,
	IN MAC_TABLE_ENTRY *pMacEntry,
	IN UCHAR QueIdx)
{
	ULONG IrqFlags;
#ifdef UAPSD_SUPPORT
	/* put the U-APSD packet to its U-APSD queue by AC ID */
	UINT32 ac_id = QueIdx - QID_AC_BE; /* should be >= 0 */


	if (UAPSD_MR_IS_UAPSD_AC(pMacEntry, ac_id))
	{
		UAPSD_PacketEnqueue(pAd, pMacEntry, pPacket, ac_id);

#ifdef DOT11Z_TDLS_SUPPORT
		TDLS_UAPSDP_TrafficIndSend(pAd, pMacEntry->Addr);
#endif /* DOT11Z_TDLS_SUPPORT */
	}
	else
#endif /* UAPSD_SUPPORT */
	{
		if (pMacEntry->PsQueue.Number >= MAX_PACKETS_IN_PS_QUEUE)
		{
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);			
			return NDIS_STATUS_FAILURE;			
		}
		else
		{
			DBGPRINT(RT_DEBUG_TRACE, ("legacy ps> queue a packet!\n"));
			RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
			InsertTailQueue(&pMacEntry->PsQueue, PACKET_TO_QUEUE_ENTRY(pPacket));
			RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
		}
	}

#ifdef CONFIG_AP_SUPPORT
	/* mark corresponding TIM bit in outgoing BEACON frame */
#ifdef UAPSD_SUPPORT
	if (UAPSD_MR_IS_NOT_TIM_BIT_NEEDED_HANDLED(pMacEntry, QueIdx))
	{
		/* 1. the station is UAPSD station;
		2. one of AC is non-UAPSD (legacy) AC;
		3. the destinated AC of the packet is UAPSD AC. */
		/* So we can not set TIM bit due to one of AC is legacy AC */
	}
	else
#endif /* UAPSD_SUPPORT */
	{
		WLAN_MR_TIM_BIT_SET(pAd, pMacEntry->apidx, pMacEntry->Aid);

	}
#endif /* CONFIG_AP_SUPPORT */

	return NDIS_STATUS_SUCCESS;
}

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:73，代码来源:ps.c

示例7: CFG80211_PacketSend

static INT CFG80211_PacketSend(PNDIS_PACKET pPktSrc, PNET_DEV pDev, RTMP_NET_PACKET_TRANSMIT Func)
{
    	PRTMP_ADAPTER pAd;
    	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
    	ASSERT(pAd);

	/* To Indicate from Which VIF */
	switch (pDev->ieee80211_ptr->iftype)
	{
		case RT_CMD_80211_IFTYPE_AP:
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_AP;
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;

		case RT_CMD_80211_IFTYPE_P2P_GO:;
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_P2P_GO;
			if(!OPSTATUS_TEST_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED)) 
			{
			        DBGPRINT(RT_DEBUG_TRACE, ("Drop the Packet due P2P GO not in ready state\n"));
			        RELEASE_NDIS_PACKET(pAd, pPktSrc, NDIS_STATUS_FAILURE);
				return 0;
			}
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;	

		case RT_CMD_80211_IFTYPE_P2P_CLIENT:
			//minIdx = MIN_NET_DEVICE_FOR_CFG80211_VIF_P2P_CLI;
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;				

		case RT_CMD_80211_IFTYPE_STATION:
		default:
			DBGPRINT(RT_DEBUG_TRACE, ("Unknown CFG80211 I/F Type(%d)\n", pDev->ieee80211_ptr->iftype));	
			RELEASE_NDIS_PACKET(pAd, pPktSrc, NDIS_STATUS_FAILURE);
			return 0;
	}	

	DBGPRINT(RT_DEBUG_INFO, ("CFG80211 Packet Type  [%s](%d)\n", 
					pDev->name, pDev->ieee80211_ptr->iftype));

	RTMP_SET_PACKET_NET_DEVICE_MBSSID(pPktSrc, MAIN_MBSSID);
	
	return Func(RTPKT_TO_OSPKT(pPktSrc));
}

开发者ID:pierce1234，项目名称:rt-n56u，代码行数:44，代码来源:cfg80211_inf.c

示例8: IgmpPktInfoQuery

NDIS_STATUS IgmpPktInfoQuery(
	IN PRTMP_ADAPTER pAd,
	IN PUCHAR pSrcBufVA,
	IN PNDIS_PACKET pPacket,
	IN UCHAR FromWhichBSSID,
	OUT INT *pInIgmpGroup,
	OUT PMULTICAST_FILTER_TABLE_ENTRY *ppGroupEntry)
{
	if(IS_MULTICAST_MAC_ADDR(pSrcBufVA))
	{
		INT32 ExcludedGroupType = -1;
		UINT16 EtherType = ntohs(*((UINT16 *)(pSrcBufVA + 12)));
 
		if (EtherType == ETH_P_IPV6)
		{
			ExcludedGroupType = IPv6MulticastFilterExcluded(pSrcBufVA);
		}
		else if(EtherType == ETH_P_IP)
		{
			ExcludedGroupType = IPv4MulticastFilterExcluded(pSrcBufVA);
		}

		if (ExcludedGroupType)
		{
			*ppGroupEntry = NULL;
			
			if (ExcludedGroupType == 1)
				*pInIgmpGroup = IGMP_PKT;
		}
		else if ((*ppGroupEntry = MulticastFilterTableLookup(pAd->pMulticastFilterTable, pSrcBufVA,
									get_netdev_from_bssid(pAd, FromWhichBSSID))) == NULL)
		{
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
			return NDIS_STATUS_FAILURE;
		}
		else
			*pInIgmpGroup = IGMP_IN_GROUP;
	}
	else if (IS_BROADCAST_MAC_ADDR(pSrcBufVA))
	{
		PUCHAR pDstIpAddr = pSrcBufVA + 30; /* point to Destination of Ip address of IP header. */
		UCHAR GroupMacAddr[6];
		PUCHAR pGroupMacAddr = (PUCHAR)&GroupMacAddr;
		
		ConvertMulticastIP2MAC(pDstIpAddr, (PUCHAR *)&pGroupMacAddr, ETH_P_IP);
		if ((*ppGroupEntry = MulticastFilterTableLookup(pAd->pMulticastFilterTable, pGroupMacAddr,
								get_netdev_from_bssid(pAd, FromWhichBSSID))) != NULL)
		{
			*pInIgmpGroup = IGMP_IN_GROUP;
		}
	}

	return NDIS_STATUS_SUCCESS;
}

开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:54，代码来源:igmp_snoop.c

示例9: MtEnqTxSwqFromPsQueue

VOID MtEnqTxSwqFromPsQueue(RTMP_ADAPTER *pAd, UCHAR qidx, STA_TR_ENTRY *tr_entry)
{
	ULONG IrqFlags = 0;
	//struct tx_swq_fifo *fifo_swq;
	QUEUE_ENTRY *pQEntry;
	QUEUE_HEADER *pAcPsQue;
	QUEUE_HEADER *pAcTxQue;
#ifdef UAPSD_SUPPORT
	MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[tr_entry->wcid];
#endif /* UAPSD_SUPPORT */ 

	//fifo_swq = &pAd->tx_swq[qidx];
	pAcPsQue = &tr_entry->ps_queue;
	pAcTxQue = &tr_entry->tx_queue[qidx];
	
	RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
#ifdef UAPSD_SUPPORT
	if (UAPSD_MR_IS_UAPSD_AC(pEntry, qidx))
	{
		while(pAcPsQue->Head)
		{
			pQEntry = RemoveTailQueue(pAcPsQue);
			UAPSD_PacketEnqueue(pAd, pEntry, PACKET_TO_QUEUE_ENTRY(pQEntry), qidx, TRUE);
		}
	}
	else
#endif /* UAPSD_SUPPORT */
	{
		/*check and insert PS Token queue*/
		if(pAcPsQue->Number > 0  && tr_entry->wcid > 0 && tr_entry->wcid < MAX_LEN_OF_TR_TABLE)
		{
			rtmp_ps_enq(pAd,tr_entry);
			DBGPRINT(RT_DEBUG_TRACE | DBG_FUNC_PS, ("pAcPsQue->Number=%d,PS:%d\n",pAcPsQue->Number,tr_entry->PsTokenFlag));			
		}

		while(pAcPsQue->Head)
		{
			pQEntry = RemoveTailQueue(pAcPsQue);
			if(tr_entry->enqCount > SQ_ENQ_NORMAL_MAX) {
			RELEASE_NDIS_PACKET(pAd, QUEUE_ENTRY_TO_PACKET(pQEntry), NDIS_STATUS_FAILURE);
			continue;
                        }
		InsertHeadQueue(pAcTxQue, pQEntry); 			
#ifdef LIMIT_GLOBAL_SW_QUEUE
			TR_ENQ_COUNT_INC(tr_entry, &pAd->TxSwQueue[qidx]);
#else /* LIMIT_GLOBAL_SW_QUEUE */
		TR_ENQ_COUNT_INC(tr_entry);
#endif /* ! LIMIT_GLOBAL_SW_QUEUE */
		}
	}
	RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);

	return;
}

开发者ID:pierce1234，项目名称:rt-n56u，代码行数:54，代码来源:mt_ps.c

示例10: CFG80211_PacketSend

static INT CFG80211_PacketSend(PNDIS_PACKET pPktSrc, PNET_DEV pDev, RTMP_NET_PACKET_TRANSMIT Func)
{
	PRTMP_ADAPTER pAd;
	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	ASSERT(pAd);

	/* To Indicate from Which VIF */
	switch (pDev->ieee80211_ptr->iftype)
	{
		case RT_CMD_80211_IFTYPE_AP:
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;

		case RT_CMD_80211_IFTYPE_P2P_GO:;
			if(!OPSTATUS_TEST_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED)) 
			{
		        MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("Drop the Packet due P2P GO not in ready state\n"));
		        RELEASE_NDIS_PACKET(pAd, pPktSrc, NDIS_STATUS_FAILURE);
				return 0;
			}
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			break;	

		case RT_CMD_80211_IFTYPE_P2P_CLIENT:
		case RT_CMD_80211_IFTYPE_STATION:
			RTMP_SET_PACKET_OPMODE(pPktSrc, OPMODE_AP);
			//printk("%s: tx ==> %d\n", __FUNCTION__, RTMP_GET_PACKET_OPMODE(pPktSrc));
			break;				

		default:
			MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("Unknown CFG80211 I/F Type(%d)\n", pDev->ieee80211_ptr->iftype));	
			RELEASE_NDIS_PACKET(pAd, pPktSrc, NDIS_STATUS_FAILURE);
			return 0;
	}	

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_INFO, ("CFG80211 Packet Type  [%s](%d)\n", 
					pDev->name, pDev->ieee80211_ptr->iftype));

	return Func(RTPKT_TO_OSPKT(pPktSrc));
}

开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:40，代码来源:cfg80211_inf.c

示例11: RTMPHandleMgmtRingDmaDoneInterrupt

/*
	========================================================================

	Routine Description:
		Process MGMT ring DMA done interrupt, running in DPC level

	Arguments:
		pAd	Pointer to our adapter

	Return Value:
		None

	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
void RTMPHandleMgmtRingDmaDoneInterrupt(struct rt_rtmp_adapter *pAd)
{
	struct rt_txd * pTxD;
	void *pPacket;
/*      int              i; */
	u8 FREE = 0;
	struct rt_rtmp_mgmt_ring *pMgmtRing = &pAd->MgmtRing;

	NdisAcquireSpinLock(&pAd->MgmtRingLock);

	RTMP_IO_READ32(pAd, TX_MGMTDTX_IDX, &pMgmtRing->TxDmaIdx);
	while (pMgmtRing->TxSwFreeIdx != pMgmtRing->TxDmaIdx) {
		FREE++;
		pTxD =
		    (struct rt_txd *) (pMgmtRing->Cell[pAd->MgmtRing.TxSwFreeIdx].
				  AllocVa);
		pTxD->DMADONE = 0;
		pPacket = pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNdisPacket;

		if (pPacket) {
			PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr0, pTxD->SDLen0,
					 PCI_DMA_TODEVICE);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
		}
		pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNdisPacket = NULL;

		pPacket =
		    pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNextNdisPacket;
		if (pPacket) {
			PCI_UNMAP_SINGLE(pAd, pTxD->SDPtr1, pTxD->SDLen1,
					 PCI_DMA_TODEVICE);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
		}
		pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNextNdisPacket = NULL;
		INC_RING_INDEX(pMgmtRing->TxSwFreeIdx, MGMT_RING_SIZE);

	}
	NdisReleaseSpinLock(&pAd->MgmtRingLock);

}

开发者ID:AbheekG，项目名称:XIA-for-Linux，代码行数:58，代码来源:cmm_data_pci.c

示例12: IgmpPktInfoQuery

NDIS_STATUS IgmpPktInfoQuery(
	IN PRTMP_ADAPTER pAd,
	IN PUCHAR pSrcBufVA,
	IN PNDIS_PACKET pPacket,
	IN struct wifi_dev *wdev,
	OUT INT *pInIgmpGroup,
	OUT PMULTICAST_FILTER_TABLE_ENTRY *ppGroupEntry)
{
	if(IS_MULTICAST_MAC_ADDR(pSrcBufVA))
	{
		BOOLEAN IgmpMldPkt = FALSE;
		PUCHAR pIpHeader = pSrcBufVA + 12;

		if(ntohs(*((UINT16 *)(pIpHeader))) == ETH_P_IPV6)
			IgmpMldPkt = IPv6MulticastFilterExcluded(pSrcBufVA, pIpHeader);
		else
			IgmpMldPkt = isIgmpPkt(pSrcBufVA, pIpHeader);

		if (IgmpMldPkt)
		{
			*ppGroupEntry = NULL;
			*pInIgmpGroup = IGMP_PKT;
		}
		else if ((*ppGroupEntry = MulticastFilterTableLookup(pAd->pMulticastFilterTable, pSrcBufVA,
									wdev->if_dev)) == NULL)
		{
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
			return NDIS_STATUS_FAILURE;
		}
		else
			*pInIgmpGroup = IGMP_IN_GROUP;
	}
	else if (IS_BROADCAST_MAC_ADDR(pSrcBufVA))
	{
		PUCHAR pDstIpAddr = pSrcBufVA + 30; /* point to Destination of Ip address of IP header. */
		UCHAR GroupMacAddr[6];
		PUCHAR pGroupMacAddr = (PUCHAR)&GroupMacAddr;

		ConvertMulticastIP2MAC(pDstIpAddr, (PUCHAR *)&pGroupMacAddr, ETH_P_IP);
		if ((*ppGroupEntry = MulticastFilterTableLookup(pAd->pMulticastFilterTable, pGroupMacAddr,
								wdev->if_dev)) != NULL)
		{
			*pInIgmpGroup = IGMP_IN_GROUP;
		}
	}

	return NDIS_STATUS_SUCCESS;
}

开发者ID:jing-git，项目名称:rt-n56u-1，代码行数:48，代码来源:igmp_snoop.c

示例13: MBSS_VirtualIF_PacketSend

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
	pPktSrc			points to our adapter
	pDev			which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
int MBSS_VirtualIF_PacketSend(
	IN PNDIS_PACKET			pPktSrc, 
	IN PNET_DEV				pDev)
{

	MEM_DBG_PKT_ALLOC_INC(pPktSrc);

	if(!(RTMP_OS_NETDEV_STATE_RUNNING(pDev)))
	{
		/* the interface is down */
		RELEASE_NDIS_PACKET(NULL, pPktSrc, NDIS_STATUS_FAILURE);
		return 0;
	} /* End of if */

	return MBSS_PacketSend(pPktSrc, pDev, rt28xx_packet_xmit);
} /* End of MBSS_VirtualIF_PacketSend */

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:32，代码来源:ap_mbss_inf.c

示例14: wdev_tx_pkts

/*
========================================================================
Routine Description:
    Early checking and OS-depened parsing for Tx packet to AP device.

Arguments:
    NDIS_HANDLE 	MiniportAdapterContext	Pointer refer to the device handle, i.e., the pAd.
	PPNDIS_PACKET	ppPacketArray			The packet array need to do transmission.
	UINT			NumberOfPackets			Number of packet in packet array.

Return Value:
	NONE

Note:
	This function do early checking and classification for send-out packet.
	You only can put OS-depened & AP related code in here.
========================================================================
*/
VOID wdev_tx_pkts(NDIS_HANDLE dev_hnd, PPNDIS_PACKET pkt_list, UINT pkt_cnt, struct wifi_dev *wdev)
{
    RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)dev_hnd;
    PNDIS_PACKET pPacket;
    BOOLEAN allowToSend;
    UCHAR wcid = MCAST_WCID;
    UINT Index;



    for (Index = 0; Index < pkt_cnt; Index++)
    {
        pPacket = pkt_list[Index];

        if (RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS |
                                 fRTMP_ADAPTER_HALT_IN_PROGRESS |
                                 fRTMP_ADAPTER_RADIO_OFF |
                                 fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)))
        {
            /* Drop send request since hardware is in reset state */
            RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
            continue;
        }

        if ((wdev->allow_data_tx == TRUE) && (wdev->tx_pkt_allowed))
            allowToSend = wdev->tx_pkt_allowed(pAd, wdev, pPacket, &wcid);
        else
            allowToSend = FALSE;

        if (allowToSend == TRUE)
        {
            RTMP_SET_PACKET_WCID(pPacket, wcid);
            RTMP_SET_PACKET_WDEV(pPacket, wdev->wdev_idx);
            NDIS_SET_PACKET_STATUS(pPacket, NDIS_STATUS_PENDING);
            pAd->RalinkCounters.PendingNdisPacketCount++;

#ifdef CONFIG_AP_SUPPORT
            IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
            {
#ifdef DELAYED_TCP_ACK
                if(!delay_tcp_ack(pAd, wcid, pPacket))
#endif /* DELAYED_TCP_ACK */
                    APSendPacket(pAd, pPacket);
            }
#endif /* CONFIG_AP_SUPPORT */

        } else {

开发者ID:jing-git，项目名称:rt-n56u，代码行数:65，代码来源:wdev_tx.c

示例15: rt28xx_send_packets

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
    skb_p           points to our adapter
    dev_p           which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
static int rt28xx_send_packets(
	IN struct sk_buff		*skb_p,
	IN struct net_device	*net_dev)
{
	RTMP_ADAPTER *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);

	if (!(net_dev->flags & IFF_UP))
	{
		RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
		return 0;
	}

	NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);

	return rt28xx_packet_xmit(skb_p);
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:33，代码来源:rt_main_dev.c

示例16: RTUSBRejectPendingPackets

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
void RTUSBRejectPendingPackets(struct rt_rtmp_adapter *pAd)
{
	u8 Index;
	struct rt_queue_entry *pEntry;
	void *pPacket;
	struct rt_queue_header *pQueue;

	for (Index = 0; Index < 4; Index++) {
		NdisAcquireSpinLock(&pAd->TxSwQueueLock[Index]);
		while (pAd->TxSwQueue[Index].Head != NULL) {
			pQueue = (struct rt_queue_header *)& (pAd->TxSwQueue[Index]);
			pEntry = RemoveHeadQueue(pQueue);
			pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
		}
		NdisReleaseSpinLock(&pAd->TxSwQueueLock[Index]);

	}

}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:35，代码来源:rtusb_data.c

示例17: P2P_VirtualIF_PacketSend

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
    skb_p           points to our adapter
    dev_p           which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
int P2P_VirtualIF_PacketSend(
    IN PNDIS_PACKET 	skb_p,
    IN PNET_DEV			dev_p)
{
    /*PRTMP_ADAPTER pAd; */
    /*PAPCLI_STRUCT pApCli; */


    MEM_DBG_PKT_ALLOC_INC(skb_p);

    if(!(RTMP_OS_NETDEV_STATE_RUNNING(dev_p)))
    {
        /* the interface is down */
        RELEASE_NDIS_PACKET(NULL, skb_p, NDIS_STATUS_FAILURE);
        return 0;
    }

    return P2P_PacketSend(skb_p, dev_p, rt28xx_packet_xmit);

} /* End of P2P_VirtualIF_PacketSend */

开发者ID:vision8520，项目名称:kernel-amlogic-mx，代码行数:36，代码来源:p2p_inf.c

示例18: RtmpCleanupPsQueue

/*
	==========================================================================
	Description:
		This routine is used to clean up a specified power-saving queue. It's
		used whenever a wireless client is deleted.
	==========================================================================
 */
VOID RtmpCleanupPsQueue(RTMP_ADAPTER *pAd, QUEUE_HEADER *pQueue)
{
	QUEUE_ENTRY *pQEntry;
	PNDIS_PACKET pPacket;

	DBGPRINT(RT_DEBUG_TRACE, ("RtmpCleanupPsQueue (0x%08lx)...\n", (ULONG)pQueue));

	while (pQueue->Head)
	{
		DBGPRINT(RT_DEBUG_TRACE,
					("RtmpCleanupPsQueue %ld...\n",pQueue->Number));

		pQEntry = RemoveHeadQueue(pQueue);
		/*pPacket = CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx); */
		pPacket = QUEUE_ENTRY_TO_PACKET(pQEntry);
		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);

		DBGPRINT(RT_DEBUG_TRACE, ("RtmpCleanupPsQueue pkt = %lx...\n", (ULONG)pPacket));
	}
}

开发者ID:23171580，项目名称:ralink，代码行数:27，代码来源:ps.c

示例19: CFG80211_VirtualIF_PacketSend

static INT CFG80211_VirtualIF_PacketSend(
	struct sk_buff *skb, PNET_DEV dev_p)
{
	struct wifi_dev *wdev;
	
	DBGPRINT(RT_DEBUG_INFO, ("%s ---> %d\n", __FUNCTION__, dev_p->ieee80211_ptr->iftype));

	if(!(RTMP_OS_NETDEV_STATE_RUNNING(dev_p)))
	{
		/* the interface is down */
		RELEASE_NDIS_PACKET(NULL, skb, NDIS_STATUS_FAILURE);
		return 0;
	}

	/* The device not ready to send packt. */
	wdev = RTMP_OS_NETDEV_GET_WDEV(dev_p);
	ASSERT(wdev);
	if (!wdev) return -1;

	return CFG80211_PacketSend(skb, dev_p, rt28xx_packet_xmit);
}

开发者ID:pierce1234，项目名称:rt-n56u，代码行数:21，代码来源:cfg80211_inf.c

示例20: rt28xx_send_packets

/*
========================================================================
Routine Description:
    Send a packet to WLAN.

Arguments:
    skb_p           points to our adapter
    dev_p           which WLAN network interface

Return Value:
    0: transmit successfully
    otherwise: transmit fail

Note:
========================================================================
*/
static int rt28xx_send_packets(
	IN struct sk_buff 		*skb_p, 
	IN struct net_device 	*net_dev)
{
	RTMP_ADAPTER *pAd = NULL;

	GET_PAD_FROM_NET_DEV(pAd, net_dev);	

	if (!(RTMP_OS_NETDEV_STATE_RUNNING(net_dev)))
	{
		RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
		return 0;
	}

	NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
	RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);

	MEM_DBG_PKT_ALLOC_INC(pAd);

	return rt28xx_packet_xmit(skb_p);
}

开发者ID:jing-git，项目名称:rt-n56u，代码行数:37，代码来源:rt_main_dev.c

注：本文中的RELEASE_NDIS_PACKET函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ REMARK函数代码示例发布时间：2022-05-30

C++ RELEASE_LOCK函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19286|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10021|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8344|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8713|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8658|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9688|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8647|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8014|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8683|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7550|2022-11-06

客服电话

电子邮件

C++ RELEASE_NDIS_PACKET函数代码示例

示例1: WDS_PacketSend

示例2: TxSwQDepthAdjust

示例3: ba_reordering_resource_release

示例4: RTUSBRejectPendingPackets

示例5: ba_enqueue_reordering_packet

示例6: client

示例7: CFG80211_PacketSend

示例8: IgmpPktInfoQuery

示例9: MtEnqTxSwqFromPsQueue

示例10: CFG80211_PacketSend

示例11: RTMPHandleMgmtRingDmaDoneInterrupt

示例12: IgmpPktInfoQuery

示例13: MBSS_VirtualIF_PacketSend

示例14: wdev_tx_pkts

示例15: rt28xx_send_packets

示例16: RTUSBRejectPendingPackets

示例17: P2P_VirtualIF_PacketSend

示例18: RtmpCleanupPsQueue

示例19: CFG80211_VirtualIF_PacketSend

示例20: rt28xx_send_packets

请发表评论

全部评论

上一篇：

下一篇：

配置Delphi工具菜单转

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053