C++ REG_SET_BIT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中REG_SET_BIT函数的典型用法代码示例。如果您正苦于以下问题：C++ REG_SET_BIT函数的具体用法？C++ REG_SET_BIT怎么用？C++ REG_SET_BIT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了REG_SET_BIT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: emac_set_clk_rmii

void emac_set_clk_rmii(void)
{
    //select ex clock source
    REG_SET_BIT(EMAC_EX_CLK_CTRL_REG, EMAC_EX_EXT_OSC_EN);
    //ex clk enable
    REG_SET_BIT(EMAC_EX_OSCCLK_CONF_REG, EMAC_EX_OSC_CLK_SEL);
}

开发者ID:jchunhua163，项目名称:esp-idf-zh，代码行数:7，代码来源:emac_dev.c

示例2: emac_mac_init

void emac_mac_init(void)
{
    REG_SET_BIT(EMAC_GMACCONFIG_REG, EMAC_GMACDUPLEX);
    REG_SET_BIT(EMAC_GMACCONFIG_REG, EMAC_GMACMIIGMII);
    REG_CLR_BIT(EMAC_GMACCONFIG_REG, EMAC_GMACFESPEED);
    REG_SET_BIT(EMAC_GMACFRAMEFILTER_REG, EMAC_PROMISCUOUS_MODE);
}

开发者ID:jchunhua163，项目名称:esp-idf-zh，代码行数:7，代码来源:emac_dev.c

示例3: ar9003_mci_2g5g_switch

void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
{
	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;

	if (!mci->update_2g5g && !force)
		return;

	if (mci->is_2g) {
		ar9003_mci_send_2g5g_status(ah, true);
		ar9003_mci_send_lna_transfer(ah, true);
		udelay(5);

		REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
		REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
			    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);

		if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
			ar9003_mci_osla_setup(ah, true);
	} else {
		ar9003_mci_send_lna_take(ah, true);
		udelay(5);

		REG_SET_BIT(ah, AR_MCI_TX_CTRL,
			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
		REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
			    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);

		ar9003_mci_osla_setup(ah, false);
		ar9003_mci_send_2g5g_status(ah, true);
	}
}

开发者ID:BreakDaLotus，项目名称:attitude_adjustment，代码行数:32，代码来源:ar9003_mci.c

示例4: ar9003_mci_2g5g_switch

void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
{
	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;

	if (mci->update_2g5g) {
		if (mci->is_2g) {
			ar9003_mci_send_2g5g_status(ah, true);
			ar9003_mci_send_lna_transfer(ah, true);
			udelay(5);

			REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
				    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
			REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
				    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);

			if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) {
				REG_SET_BIT(ah, AR_BTCOEX_CTRL,
					    AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
			}
		} else {
			ar9003_mci_send_lna_take(ah, true);
			udelay(5);

			REG_SET_BIT(ah, AR_MCI_TX_CTRL,
				    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
			REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
				    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
			REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
				    AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);

			ar9003_mci_send_2g5g_status(ah, true);
		}
	}
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:34，代码来源:ar9003_mci.c

示例5: emac_dma_init

void emac_dma_init(void)
{
    REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_FORWARD_UNDERSIZED_GOOD_FRAMES);
    REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_OPERATE_SECOND_FRAME);
    REG_SET_FIELD(EMAC_DMABUSMODE_REG, EMAC_PROG_BURST_LEN, 4);
    REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_DMAOPERATION_MODE_REG);
}

开发者ID:jchunhua163，项目名称:esp-idf-zh，代码行数:7，代码来源:emac_dev.c

示例6: ath9k_hw_abort_tx_dma

void ath9k_hw_abort_tx_dma(struct ath_hw *ah)
{
	int maxdelay = 1000;
	int i, q;

	if (ah->curchan) {
		if (IS_CHAN_HALF_RATE(ah->curchan))
			maxdelay *= 2;
		else if (IS_CHAN_QUARTER_RATE(ah->curchan))
			maxdelay *= 4;
	}

	REG_WRITE(ah, AR_Q_TXD, AR_Q_TXD_M);

	REG_SET_BIT(ah, AR_PCU_MISC, AR_PCU_FORCE_QUIET_COLL | AR_PCU_CLEAR_VMF);
	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
	REG_SET_BIT(ah, AR_D_GBL_IFS_MISC, AR_D_GBL_IFS_MISC_IGNORE_BACKOFF);

	for (q = 0; q < AR_NUM_QCU; q++) {
		for (i = 0; i < maxdelay; i++) {
			if (i)
				udelay(5);

			if (!ath9k_hw_numtxpending(ah, q))
				break;
		}
	}

	REG_CLR_BIT(ah, AR_PCU_MISC, AR_PCU_FORCE_QUIET_COLL | AR_PCU_CLEAR_VMF);
	REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
	REG_CLR_BIT(ah, AR_D_GBL_IFS_MISC, AR_D_GBL_IFS_MISC_IGNORE_BACKOFF);

	REG_WRITE(ah, AR_Q_TXD, 0);
}

开发者ID:020gzh，项目名称:linux，代码行数:34，代码来源:mac.c

示例7: ath9k_hw_abort_tx_dma

void ath9k_hw_abort_tx_dma(struct ath_hw *ah)
{
	int i, q;

	REG_WRITE(ah, AR_Q_TXD, AR_Q_TXD_M);

	REG_SET_BIT(ah, AR_PCU_MISC, AR_PCU_FORCE_QUIET_COLL | AR_PCU_CLEAR_VMF);
	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
	REG_SET_BIT(ah, AR_D_GBL_IFS_MISC, AR_D_GBL_IFS_MISC_IGNORE_BACKOFF);

	for (q = 0; q < AR_NUM_QCU; q++) {
		for (i = 0; i < 1000; i++) {
			if (i)
				udelay(5);

			if (!ath9k_hw_numtxpending(ah, q))
				break;
		}
	}

	REG_CLR_BIT(ah, AR_PCU_MISC, AR_PCU_FORCE_QUIET_COLL | AR_PCU_CLEAR_VMF);
	REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
	REG_CLR_BIT(ah, AR_D_GBL_IFS_MISC, AR_D_GBL_IFS_MISC_IGNORE_BACKOFF);

	REG_WRITE(ah, AR_Q_TXD, 0);
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:26，代码来源:mac.c

示例8: ath9k_hw_start_nfcal

void ath9k_hw_start_nfcal(struct ath_hw *ah)
{
	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
		    AR_PHY_AGC_CONTROL_ENABLE_NF);
	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:8，代码来源:calib.c

示例9: emac_enable_flowctrl

void emac_enable_flowctrl(void)
{
    REG_SET_BIT(EMAC_GMACFLOWCONTROL_REG, EMAC_TRANSMIT_FLOW_CONTROL_ENABLE);
    REG_SET_BIT(EMAC_GMACFLOWCONTROL_REG, EMAC_RECEIVE_FLOW_CONTROL_ENABLE);
    REG_CLR_BIT(EMAC_GMACFLOWCONTROL_REG, EMAC_DISABLE_ZERO_QUANTA_PAUSE);
    REG_SET_FIELD(EMAC_GMACFLOWCONTROL_REG, EMAC_PAUSE_TIME, 0x1648);
    REG_SET_FIELD(EMAC_GMACFLOWCONTROL_REG, EMAC_PAUSE_LOW_THRESHOLD, 0x1);
}

开发者ID:jchunhua163，项目名称:esp-idf-zh，代码行数:8，代码来源:emac_dev.c

示例10: esp_mpi_release_hardware

void esp_mpi_release_hardware( void )
{
    REG_SET_BIT(DPORT_RSA_PD_CTRL_REG, DPORT_RSA_PD);

    /* don't reset digital signature unit, as this resets AES also */
    REG_SET_BIT(DPORT_PERI_RST_EN_REG, DPORT_PERI_EN_RSA);
    REG_CLR_BIT(DPORT_PERI_CLK_EN_REG, DPORT_PERI_EN_RSA);

    _lock_release(&mpi_lock);
}

开发者ID:jchunhua163，项目名称:esp-idf-zh，代码行数:10，代码来源:esp_bignum.c

示例11: emac_set_clk_mii

void emac_set_clk_mii(void)
{
    //select ex clock source
    REG_SET_BIT(EMAC_EX_CLK_CTRL_REG, EMAC_EX_EXT_OSC_EN);
    //ex clk enable
    REG_SET_BIT(EMAC_EX_OSCCLK_CONF_REG, EMAC_EX_OSC_CLK_SEL);

    //set mii mode rx/tx clk enable
    REG_SET_BIT(EMAC_EX_CLK_CTRL_REG, EMAC_EX_MII_CLK_RX_EN);
    REG_SET_BIT(EMAC_EX_CLK_CTRL_REG, EMAC_EX_MII_CLK_TX_EN);
}

开发者ID:jchunhua163，项目名称:esp-idf-zh，代码行数:11，代码来源:emac_dev.c

示例12: ar9003_mci_observation_set_up

static void ar9003_mci_observation_set_up(struct ath_hw *ah)
{
	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;

	if (mci->config & ATH_MCI_CONFIG_MCI_OBS_MCI) {
		ath9k_hw_gpio_request_out(ah, 3, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_DATA);
		ath9k_hw_gpio_request_out(ah, 2, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_CLK);
		ath9k_hw_gpio_request_out(ah, 1, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
		ath9k_hw_gpio_request_out(ah, 0, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
	} else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_TXRX) {
		ath9k_hw_gpio_request_out(ah, 3, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_WL_IN_TX);
		ath9k_hw_gpio_request_out(ah, 2, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_WL_IN_RX);
		ath9k_hw_gpio_request_out(ah, 1, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
		ath9k_hw_gpio_request_out(ah, 0, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
		ath9k_hw_gpio_request_out(ah, 5, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
	} else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_BT) {
		ath9k_hw_gpio_request_out(ah, 3, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
		ath9k_hw_gpio_request_out(ah, 2, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
		ath9k_hw_gpio_request_out(ah, 1, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
		ath9k_hw_gpio_request_out(ah, 0, NULL,
					  AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
	} else
		return;

	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);

	REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_DS_JTAG_DISABLE, 1);
	REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_WLAN_UART_INTF_EN, 0);
	REG_SET_BIT(ah, AR_GLB_GPIO_CONTROL, ATH_MCI_CONFIG_MCI_OBS_GPIO);

	REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_GPIO_OBS_SEL, 0);
	REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL, 1);
	REG_WRITE(ah, AR_OBS, 0x4b);
	REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL1, 0x03);
	REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL2, 0x01);
	REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_LSB, 0x02);
	REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_MSB, 0x03);
	REG_RMW_FIELD(ah, AR_PHY_TEST_CTL_STATUS,
		      AR_PHY_TEST_CTL_DEBUGPORT_SEL, 0x07);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:52，代码来源:ar9003_mci.c

示例13: hw_trng_enable

void hw_trng_enable(hw_trng_cb callback)
{
    if (callback != NULL)
    {
        trng_cb = callback;
        hw_trng_clear_pending();
        NVIC_EnableIRQ(TRNG_IRQn);
    }

    GLOBAL_INT_DISABLE();
    REG_SET_BIT(CRG_TOP, CLK_AMBA_REG, TRNG_CLK_ENABLE);
    GLOBAL_INT_RESTORE();
    REG_SET_BIT(TRNG, TRNG_CTRL_REG, TRNG_ENABLE);
}

开发者ID:GiedriusM，项目名称:openthread，代码行数:14，代码来源:hw_trng.c

示例14: ar9003_mci_set_power_awake

void ar9003_mci_set_power_awake(struct ath_hw *ah)
{
	u32 btcoex_ctrl2, diag_sw;
	int i;
	u8 lna_ctrl, bt_sleep;

	for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
		btcoex_ctrl2 = REG_READ(ah, AR_BTCOEX_CTRL2);
		if (btcoex_ctrl2 != 0xdeadbeef)
			break;
		udelay(AH_TIME_QUANTUM);
	}
	REG_WRITE(ah, AR_BTCOEX_CTRL2, (btcoex_ctrl2 | BIT(23)));

	for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
		diag_sw = REG_READ(ah, AR_DIAG_SW);
		if (diag_sw != 0xdeadbeef)
			break;
		udelay(AH_TIME_QUANTUM);
	}
	REG_WRITE(ah, AR_DIAG_SW, (diag_sw | BIT(27) | BIT(19) | BIT(18)));
	lna_ctrl = REG_READ(ah, AR_OBS_BUS_CTRL) & 0x3;
	bt_sleep = REG_READ(ah, AR_MCI_RX_STATUS) & AR_MCI_RX_REMOTE_SLEEP;

	REG_WRITE(ah, AR_BTCOEX_CTRL2, btcoex_ctrl2);
	REG_WRITE(ah, AR_DIAG_SW, diag_sw);

	if (bt_sleep && (lna_ctrl == 2)) {
		REG_SET_BIT(ah, AR_BTCOEX_RC, 0x1);
		REG_CLR_BIT(ah, AR_BTCOEX_RC, 0x1);
		udelay(50);
	}
}

开发者ID:BreakDaLotus，项目名称:attitude_adjustment，代码行数:33，代码来源:ar9003_mci.c

示例15: ath9k_hw_setup_calibration

static void ath9k_hw_setup_calibration(struct ath_hal *ah,
				       struct hal_cal_list *currCal)
{
	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
		      currCal->calData->calCountMax);

	switch (currCal->calData->calType) {
	case IQ_MISMATCH_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
			"starting IQ Mismatch Calibration\n");
		break;
	case ADC_GAIN_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
			"starting ADC Gain Calibration\n");
		break;
	case ADC_DC_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
			"starting ADC DC Calibration\n");
		break;
	case ADC_DC_INIT_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
			"starting Init ADC DC Calibration\n");
		break;
	}

	REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
		    AR_PHY_TIMING_CTRL4_DO_CAL);
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:33，代码来源:calib.c

示例16: ar9002_hw_setup_calibration

static void ar9002_hw_setup_calibration(struct ath_hw *ah,
					struct ath9k_cal_list *currCal)
{
	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
		      currCal->calData->calCountMax);

	switch (currCal->calData->calType) {
	case IQ_MISMATCH_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
		DBG2("ath9k: "
			"starting IQ Mismatch Calibration\n");
		break;
	case ADC_GAIN_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
		DBG2("ath9k: "
			"starting ADC Gain Calibration\n");
		break;
	case ADC_DC_CAL:
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
		DBG2("ath9k: "
			"starting ADC DC Calibration\n");
		break;
	}

	REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
		    AR_PHY_TIMING_CTRL4_DO_CAL);
}

开发者ID:42wim，项目名称:ipxe，代码行数:28，代码来源:ath9k_ar9002_calib.c

示例17: ar9003_hw_configpcipowersave

/*
 * Helper for ASPM support.
 *
 * Disable PLL when in L0s as well as receiver clock when in L1.
 * This power saving option must be enabled through the SerDes.
 *
 * Programming the SerDes must go through the same 288 bit serial shift
 * register as the other analog registers.  Hence the 9 writes.
 */
static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
					 bool power_off)
{
	/* Nothing to do on restore for 11N */
	if (!power_off /* !restore */) {
		/* set bit 19 to allow forcing of pcie core into L1 state */
		REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);

		/* Several PCIe massages to ensure proper behaviour */
		if (ah->config.pcie_waen)
			REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
		else
			REG_WRITE(ah, AR_WA, ah->WARegVal);
	}

	/*
	 * Configire PCIE after Ini init. SERDES values now come from ini file
	 * This enables PCIe low power mode.
	 */
	if (ah->config.pcieSerDesWrite) {
		unsigned int i;
		struct ar5416IniArray *array;

		array = power_off ? &ah->iniPcieSerdes :
				    &ah->iniPcieSerdesLowPower;

		for (i = 0; i < array->ia_rows; i++) {
			REG_WRITE(ah,
				  INI_RA(array, i, 0),
				  INI_RA(array, i, 1));
		}
	}
}

开发者ID:AllenWeb，项目名称:linux，代码行数:42，代码来源:ar9003_hw.c

示例18: ar9003_mci_mute_bt

static void ar9003_mci_mute_bt(struct ath_hw *ah)
{
	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;

	/* disable all MCI messages */
	REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
	REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);

	/* wait pending HW messages to flush out */
	udelay(10);

	/*
	 * Send LNA_TAKE and SYS_SLEEPING when
	 * 1. reset not after resuming from full sleep
	 * 2. before reset MCI RX, to quiet BT and avoid MCI RX misalignment
	 */
	if (MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
		ar9003_mci_send_lna_take(ah, true);
		udelay(5);
	}

	ar9003_mci_send_sys_sleeping(ah, true);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:27，代码来源:ar9003_mci.c

示例19: ar9003_hw_setup_calibration

static void ar9003_hw_setup_calibration(struct ath_hw *ah,
					struct ath9k_cal_list *currCal)
{
	/* Select calibration to run */
	switch (currCal->calData->calType) {
	case IQ_MISMATCH_CAL:
		/*
		 * Start calibration with
		 * 2^(INIT_IQCAL_LOG_COUNT_MAX+1) samples
		 */
		REG_RMW_FIELD(ah, AR_PHY_TIMING4,
			      AR_PHY_TIMING4_IQCAL_LOG_COUNT_MAX,
		currCal->calData->calCountMax);
		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);

		DBG2("ath9k: "
			"starting IQ Mismatch Calibration\n");

		/* Kick-off cal */
		REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL);
		break;
	case TEMP_COMP_CAL:
		REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
			      AR_PHY_65NM_CH0_THERM_LOCAL, 1);
		REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
			      AR_PHY_65NM_CH0_THERM_START, 1);

		DBG2("ath9k: "
			"starting Temperature Compensation Calibration\n");
		break;
	}
}

开发者ID:42wim，项目名称:ipxe，代码行数:32，代码来源:ath9k_ar9003_calib.c

示例20: ath9k_hw_setrxabort

/*
 * This can stop or re-enables RX.
 *
 * If bool is set this will kill any frame which is currently being
 * transferred between the MAC and baseband and also prevent any new
 * frames from getting started.
 */
bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
{
	u32 reg;

	if (set) {
		REG_SET_BIT(ah, AR_DIAG_SW,
			    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));

		if (!ath9k_hw_wait(ah, AR_OBS_BUS_1, AR_OBS_BUS_1_RX_STATE,
				   0, AH_WAIT_TIMEOUT)) {
			REG_CLR_BIT(ah, AR_DIAG_SW,
				    (AR_DIAG_RX_DIS |
				     AR_DIAG_RX_ABORT));

			reg = REG_READ(ah, AR_OBS_BUS_1);
			ath_err(ath9k_hw_common(ah),
				"RX failed to go idle in 10 ms RXSM=0x%x\n",
				reg);

			return false;
		}
	} else {
		REG_CLR_BIT(ah, AR_DIAG_SW,
			    (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
	}

	return true;
}

开发者ID:020gzh，项目名称:linux，代码行数:35，代码来源:mac.c

注：本文中的REG_SET_BIT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。