C++ REGULATOR_SUPPLY函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中REGULATOR_SUPPLY函数的典型用法代码示例。如果您正苦于以下问题：C++ REGULATOR_SUPPLY函数的具体用法？C++ REGULATOR_SUPPLY怎么用？C++ REGULATOR_SUPPLY使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了REGULATOR_SUPPLY函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: REGULATOR_SUPPLY

#include "board-enterprise.h"
#include "pm.h"
#include "wakeups-t3.h"
#include "tegra3_tsensor.h"

#define PMC_CTRL		0x0
#define PMC_CTRL_INTR_LOW	(1 << 17)

#define PMC_DPD_PADS_ORIDE		0x01c
#define PMC_DPD_PADS_ORIDE_BLINK	(1 << 20)

static bool is_enterprise_machine = false;

/************************ TPS80031 based regulator ****************/
static struct regulator_consumer_supply tps80031_vio_supply_a02[] = {
	REGULATOR_SUPPLY("vio_1v8", NULL),
	REGULATOR_SUPPLY("avdd_osc", NULL),
	REGULATOR_SUPPLY("vddio_sys", NULL),
	REGULATOR_SUPPLY("vddio_uart", NULL),
	REGULATOR_SUPPLY("pwrdet_uart", NULL),
	REGULATOR_SUPPLY("vddio_lcd", NULL),
	REGULATOR_SUPPLY("pwrdet_lcd", NULL),
	REGULATOR_SUPPLY("vddio_audio", NULL),
	REGULATOR_SUPPLY("pwrdet_audio", NULL),
	REGULATOR_SUPPLY("vddio_bb", NULL),
	REGULATOR_SUPPLY("pwrdet_bb", NULL),
	REGULATOR_SUPPLY("vddio_gmi", NULL),
	REGULATOR_SUPPLY("avdd_usb_pll", NULL),
	REGULATOR_SUPPLY("vddio_cam", NULL),
	REGULATOR_SUPPLY("pwrdet_cam", NULL),
	REGULATOR_SUPPLY("vddio_sdmmc1", NULL),

开发者ID:pio-masaki，项目名称:android-kernel-at1s0，代码行数:31，代码来源:board-enterprise-power.c

示例2: defined

/* Fucking Power Key... */
#include <linux/interrupt.h>
#include <linux/input.h>

static struct input_dev *max77663_pwrkey; // Fucking Power Key
#endif

#define PMC_CTRL		0x0
#define PMC_CTRL_INTR_LOW	(1 << 17)


/************************ TPS80031 based regulator ****************/
#if defined(CONFIG_REGULATOR_TPS80031)

static struct regulator_consumer_supply tps80031_vio_supply[] = {
	REGULATOR_SUPPLY("avdd_osc", NULL),
	REGULATOR_SUPPLY("avdd_usb_pll", NULL),
	REGULATOR_SUPPLY("avdd_hdmi_pll", NULL),
	REGULATOR_SUPPLY("vddio_audio", NULL),
	REGULATOR_SUPPLY("vddio_lcd", NULL),
	REGULATOR_SUPPLY("vddio_cam", NULL),
	REGULATOR_SUPPLY("vddio_uart", NULL),
	REGULATOR_SUPPLY("vddio_bb", NULL),
	REGULATOR_SUPPLY("vddio_sdmmc1", NULL),
	REGULATOR_SUPPLY("vddio_sdmmc4", NULL),
	REGULATOR_SUPPLY("vddio_sys", NULL),
	REGULATOR_SUPPLY("vddio_gmi", NULL),
	REGULATOR_SUPPLY("vddio_sd_slot", NULL),

};

开发者ID:JoinTheRealms，项目名称:CopyCat-Kernel-P880，代码行数:30，代码来源:board-x3-power.c

示例3: omap_ethernet_init

static int __init omap_ethernet_init(void)
{
	int status;

	/* Request of GPIO lines */
	status = gpio_request_array(sdp4430_eth_gpios,
				    ARRAY_SIZE(sdp4430_eth_gpios));
	if (status)
		pr_err("Cannot request ETH GPIOs\n");

	return status;
}

static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
};

static struct regulator_init_data sdp4430_vbat_data = {
	.constraints = {
		.always_on	= 1,
	},
	.num_consumer_supplies	= ARRAY_SIZE(sdp4430_vbat_supply),
	.consumer_supplies	= sdp4430_vbat_supply,
};

static struct fixed_voltage_config sdp4430_vbat_pdata = {
	.supply_name	= "VBAT",
	.microvolts	= 3750000,
	.init_data	= &sdp4430_vbat_data,

开发者ID:ah-，项目名称:ubuntu-kernel-mbp，代码行数:30，代码来源:board-4430sdp.c

示例4: PCOM_VREG_NCP

#define PCOM_VREG_LDO PCOM_VREG_SMP

#define PCOM_VREG_NCP(_name, _id, _supply, _min_uV, _max_uV, _rise_time, \
		_always_on, _boot_on, _apply_uV, _supply_uV) \
{ \
	.init_data = PCOM_VREG_INIT_DATA(_name, _supply, -(_min_uV), \
		-(_max_uV), _always_on, _boot_on, _apply_uV, _supply_uV), \
	.id = _id, \
	.rise_time = _rise_time, \
	.pulldown = -1, \
	.negative = 1, \
}

PCOM_VREG_CONSUMERS(smps1) = {
    REGULATOR_SUPPLY("smps1",	NULL),
    REGULATOR_SUPPLY("msmc1",	NULL),
};

PCOM_VREG_CONSUMERS(smps2) = {
    REGULATOR_SUPPLY("smps2",	NULL),
    REGULATOR_SUPPLY("msmc2",	NULL),
};

PCOM_VREG_CONSUMERS(smps3) = {
    REGULATOR_SUPPLY("smps3",	NULL),
    REGULATOR_SUPPLY("msme1",	NULL),
    REGULATOR_SUPPLY("vcc_i2c",	"1-004a"),
    REGULATOR_SUPPLY("vcc_i2c",	"1-0038"),
};

开发者ID:juniskane，项目名称:android_kernel_nokia_msm8x25，代码行数:29，代码来源:board-msm7x27a-regulator.c

示例5: gpio_export

	gpio_export(gpio, 0);

	gpio = S5PV210_GPJ0(5);		/* XMSMADDR_5 */
	gpio_request(gpio, "TSP_INT");

	s5p_register_gpio_interrupt(gpio);
	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
	i2c2_devs[0].irq = gpio_to_irq(gpio);
}

/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)

static struct regulator_consumer_supply goni_ldo3_consumers[] = {
	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
};

static struct regulator_consumer_supply goni_ldo5_consumers[] = {
	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
};

static struct regulator_consumer_supply goni_ldo8_consumers[] = {
	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
};

static struct regulator_consumer_supply goni_ldo11_consumers[] = {
	REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */
};

static struct regulator_consumer_supply goni_ldo13_consumers[] = {

开发者ID:0987363，项目名称:BMW-OpenSource，代码行数:31，代码来源:mach-goni.c

示例6: defined

#define OVERO_GPIO_PENDOWN	114
#define OVERO_GPIO_BT_NRESET	164
#define OVERO_GPIO_USBH_CPEN	168
#define OVERO_GPIO_USBH_NRESET	183

#define OVERO_SMSC911X_CS      5
#define OVERO_SMSC911X_GPIO    176
#define OVERO_SMSC911X2_CS     4
#define OVERO_SMSC911X2_GPIO   65

#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)

/* fixed regulator for ads7846 */
static struct regulator_consumer_supply ads7846_supply[] = {
	REGULATOR_SUPPLY("vcc", "spi1.0"),
};

static struct regulator_init_data vads7846_regulator = {
	.constraints = {
		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
	.consumer_supplies	= ads7846_supply,
};

static struct fixed_voltage_config vads7846 = {
	.supply_name		= "vads7846",
	.microvolts		= 3300000, /* 3.3V */
	.gpio			= -EINVAL,
	.startup_delay		= 0,

开发者ID:7L，项目名称:pi_plus，代码行数:31，代码来源:board-overo.c

示例7: pcf8575_cir_enable


//.........这里部分代码省略.........
	case FVID2_STD_VGA_72:
	case FVID2_STD_VGA_75:
	case FVID2_STD_VGA_85:
		filter_sel = 0x02u;  /* Filter2: 1, Filter1: 0 */
		break;
	case FVID2_STD_NTSC:
	case FVID2_STD_PAL:
	case FVID2_STD_480I:
	case FVID2_STD_576I:
	case FVID2_STD_D1:
		filter_sel = 0x00u;  /* Filter2: 0, Filter1: 0 */
		break;

	default:
		filter_sel = 0x01u;  /* Filter2: 0, Filter1: 1 */
		break;
	}
	pcf8575_port[0] |=
		(filter_sel << VPS_VC_IO_EXP_THS7368_FILTER_SHIFT);
	msg.buf = pcf8575_port;
	ret =  (i2c_transfer(pcf8575_client->adapter, &msg, 1));
	if (ret < 0) {
		printk(KERN_ERR "I2C: Transfer failed at %s %d with error code: %d\n",
			__func__, __LINE__, ret);
		return ret;
	}
	return 0;
}
EXPORT_SYMBOL(vps_ti814x_set_tvp7002_filter);
/* Touchscreen platform data */
static struct qt602240_platform_data ts_platform_data = {
	.x_line		= 18,
	.y_line		= 12,
	.x_size		= 800,
	.y_size		= 480,
	.blen		= 0x01,
	.threshold	= 30,
	.voltage	= 2800000,
	.orient		= QT602240_HORIZONTAL_FLIP,
};

static struct at24_platform_data eeprom_info = {
	.byte_len       = (256*1024) / 8,
	.page_size      = 64,
	.flags          = AT24_FLAG_ADDR16,
};

static struct regulator_consumer_supply ti8148evm_mpu_supply =
	REGULATOR_SUPPLY("mpu", NULL);

/*
 * DM814x/AM387x (TI814x) devices have restriction that none of the supply to
 * the device should be turned of.
 *
 * NOTE: To prevent turning off regulators not explicitly consumed by drivers
 * depending on it, ensure following:
 *	1) Set always_on = 1 for them OR
 *	2) Avoid calling regulator_has_full_constraints()
 *
 * With just (2), there will be a warning about incomplete constraints.
 * E.g., "regulator_init_complete: incomplete constraints, leaving LDO8 on"
 *
 * In either cases, the supply won't be disabled.
 *
 * We are taking approach (1).
 */
static struct regulator_init_data tps65911_reg_data[] = {
	/* VRTC */
	{
		.constraints = {
			.min_uV = 1800000,
			.max_uV = 1800000,
			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
						REGULATOR_CHANGE_STATUS,
			.always_on = 1,
		},
	},

	/* VIO -VDDA 1.8V */
	{
		.constraints = {
			.min_uV = 1500000,
			.max_uV = 1500000,
			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
						REGULATOR_CHANGE_STATUS,
			.always_on = 1,
		},
	},

	/* VDD1 - MPU */
	{
		.constraints = {
			.min_uV = 600000,
			.max_uV = 1500000,
			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
			.always_on = 1,
		},
		.num_consumer_supplies	= 1,
		.consumer_supplies	= &ti8148evm_mpu_supply,
	},

开发者ID:antowang，项目名称:o3_linux，代码行数:101，代码来源:board-ti8148evm.c

示例8: GPIO_KEY

static struct gpio_keys_button gpio_buttons[] = {
	GPIO_KEY(KEY_4,		RCAR_GP_PIN(1, 28),	"SW2-pin4"),
	GPIO_KEY(KEY_3,		RCAR_GP_PIN(1, 26),	"SW2-pin3"),
	GPIO_KEY(KEY_2,		RCAR_GP_PIN(1, 24),	"SW2-pin2"),
	GPIO_KEY(KEY_1,		RCAR_GP_PIN(1, 14),	"SW2-pin1"),
};

static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
	.buttons	= gpio_buttons,
	.nbuttons	= ARRAY_SIZE(gpio_buttons),
};

/* Fixed 3.3V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
	REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
};

/*
 * SDHI regulator macro
 *
 ** FIXME**
 * Lager board vqmmc is provided via DA9063 PMIC chip,
 * and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
 * but, it doesn't have regulator support at this point.
 * It uses gpio-regulator for vqmmc as quick-hack.
 */
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin)				\
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer =	\
	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx);		\
									\

开发者ID:mdr78，项目名称:Linux-x1000，代码行数:31，代码来源:board-lager.c

示例9: ARRAY_SIZE

	.buttons	= gpio_buttons,
	.nbuttons	= ARRAY_SIZE(gpio_buttons),
};

static struct platform_device gpio_keys_device = {
	.name   = "gpio-keys",
	.id     = -1,
	.dev    = {
		.platform_data  = &gpio_key_info,
	},
};

/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
};

/* SDHI0 */
/*
 * FIXME
 *
 * It use polling mode here, since
 * CD (= Card Detect) pin is not connected to SDHI0_CD.
 * We can use IRQ31 as card detect irq,
 * but it needs chattering removal operation

开发者ID:Memphiz，项目名称:linux，代码行数:31，代码来源:board-armadillo800eva.c

示例10: ek_add_device_buttons

static void __init ek_add_device_buttons(void) {}
#endif

/*
 * ADCs
 */

static struct at91_adc_data ek_adc_data = {
	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
	.use_external_triggers = true,
	.vref = 3300,
};

#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
	REGULATOR_SUPPLY("AVDD", "0-001b"),
	REGULATOR_SUPPLY("HPVDD", "0-001b"),
	REGULATOR_SUPPLY("DBVDD", "0-001b"),
	REGULATOR_SUPPLY("DCVDD", "0-001b"),
};

static struct regulator_init_data ek_avdd_reg_init_data = {
	.constraints	= {
		.name	= "3V3",
		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.consumer_supplies = ek_audio_consumer_supplies,
	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
};

static struct fixed_voltage_config ek_vdd_pdata = {

开发者ID:01org，项目名称:XenGT-Preview-kernel，代码行数:31，代码来源:board-sam9g20ek.c

示例11: VREG_CONSUMERS

 */

#include <linux/regulator/pm8xxx-regulator.h>

#include "board-awifi.h"

#define VREG_CONSUMERS(_id) \
	static struct regulator_consumer_supply vreg_consumers_##_id[]

/* Regulators that are present when using either PM8921 or PM8917 */
/*
 * Consumer specific regulator names:
 *			 regulator name		consumer dev_name
 */
VREG_CONSUMERS(L1) = {
	REGULATOR_SUPPLY("8921_l1",		NULL),
};
VREG_CONSUMERS(L2) = {
	REGULATOR_SUPPLY("8921_l2",		NULL),
	REGULATOR_SUPPLY("dsi_vdda",      	"mipi_dsi.1"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_csid.0"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_csid.1"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_csid.2"),
	REGULATOR_SUPPLY("lvds_pll_vdda",	"lvds.0"),
	REGULATOR_SUPPLY("dsi1_pll_vdda",	"mipi_dsi.1"),
	REGULATOR_SUPPLY("HRD_VDDD_CDC_D",		"tabla2x-slim"),
	REGULATOR_SUPPLY("HRD_CDC_VDDA_A_1P2V",	"tabla2x-slim"),
	REGULATOR_SUPPLY("dsi_pll_vdda",	"mdp.0"),
};
VREG_CONSUMERS(L3) = {
	REGULATOR_SUPPLY("8921_l3",		NULL),

开发者ID:Fechinator，项目名称:FechdaKernel_V500，代码行数:31，代码来源:board-awifi-regulator.c

示例12: defined

#include <plat/gpio-cfg.h>

#include <mach/irqs.h>
#include <mach/hs-iic.h>

#if defined(CONFIG_MFD_MAX77802)
#include <linux/mfd/max77802.h>
#endif

#include "board-universal5410.h"

#if defined(CONFIG_REGULATOR_MAX77802)
/* max77802 */

static struct regulator_consumer_supply max77802_buck1 =
	REGULATOR_SUPPLY("vdd_mif", NULL);

static struct regulator_consumer_supply max77802_buck2 =
	REGULATOR_SUPPLY("vdd_arm", NULL);

static struct regulator_consumer_supply max77802_buck3 =
	REGULATOR_SUPPLY("vdd_int", NULL);

static struct regulator_consumer_supply max77802_buck4 =
	REGULATOR_SUPPLY("vdd_g3d", NULL);

static struct regulator_consumer_supply max77802_buck6 =
	REGULATOR_SUPPLY("vdd_kfc", NULL);

static struct regulator_consumer_supply ldo2_supply[] = {
	REGULATOR_SUPPLY("vmem2_1.2v_ap", NULL),

开发者ID:253627764，项目名称:GT-I9500，代码行数:31，代码来源:board-v1-pmic-max.c

示例13: VREG_CONSUMERS

#include "board-8064.h"

#ifdef CONFIG_REGULATOR_MAX77693
#include <linux/mfd/max77693.h>
#endif

#define VREG_CONSUMERS(_id) \
	static struct regulator_consumer_supply vreg_consumers_##_id[]

/* Regulators that are present when using either PM8921 or PM8917 */
/*
 * Consumer specific regulator names:
 *			 regulator name		consumer dev_name
 */
VREG_CONSUMERS(L1) = {
	REGULATOR_SUPPLY("8921_l1",		NULL),
};
VREG_CONSUMERS(L2) = {
	REGULATOR_SUPPLY("8921_l2",		NULL),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_csid.0"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_csid.1"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_csid.2"),
	REGULATOR_SUPPLY("lvds_pll_vdda",	"lvds.0"),
	REGULATOR_SUPPLY("dsi1_pll_vdda",	"mipi_dsi.1"),
	REGULATOR_SUPPLY("HRD_VDDD_CDC_D",		"tabla2x-slim"),
	REGULATOR_SUPPLY("HRD_CDC_VDDA_A_1P2V",	"tabla2x-slim"),
};
VREG_CONSUMERS(L3) = {
	REGULATOR_SUPPLY("8921_l3",		NULL),
	REGULATOR_SUPPLY("HSUSB_3p3",		"msm_otg"),
	REGULATOR_SUPPLY("HSUSB_3p3",		"msm_ehci_host.0"),

开发者ID:Adrioid83，项目名称:jflte_xxx，代码行数:31，代码来源:board-8064-regulator.c

示例14: REGULATOR_SUPPLY

static struct sht15_platform_data platform_data_sht15 = {
	.gpio_data =  100,
	.gpio_sck  =  98,
};

static struct platform_device sht15 = {
	.name = "sht15",
	.id = -1,
	.dev = {
		.platform_data = &platform_data_sht15,
	},
};

static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
	REGULATOR_SUPPLY("vcc", "sht15"),
};

enum stargate2_ldos{
	vcc_vref,
	vcc_cc2420,
	/* a mote connector? */
	vcc_mica,
	/* the CSR bluecore chip */
	vcc_bt,
	/* The two voltages available to sensor boards */
	vcc_sensor_1_8,
	vcc_sensor_3,
	/* directly connected to the pxa27x */
	vcc_sram_ext,
	vcc_pxa_pll,

开发者ID:LITMUS-RT，项目名称:litmus-rt-odroidx，代码行数:30，代码来源:stargate2.c

示例15: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id), \
			.consumer_supplies	= vreg_consumers_##_id, \
		}, \
		.regulator_name	= _reg_name, \
		.active_low	= _active_low, \
		.gpio_label	= _gpio_label, \
		.gpio		= _gpio, \
	}

#define GPIO_VREG_ID_EXT_2P85V	0
#define GPIO_VREG_ID_EXT_1P8V	1

static struct regulator_consumer_supply vreg_consumers_EXT_2P85V[] = {
	REGULATOR_SUPPLY("cam_ov5647_avdd", "0-006c"),
	REGULATOR_SUPPLY("cam_ov5647_truly_cm6868_avdd", "0-006c"),
	REGULATOR_SUPPLY("cam_ov7692_avdd", "0-0078"),
	REGULATOR_SUPPLY("cam_ov8825_avdd", "0-000d"),
	REGULATOR_SUPPLY("lcd_vdd", "mipi_dsi.1"),
#ifdef CONFIG_AR0543
	REGULATOR_SUPPLY("cam_ar0543_avdd", "0-0064"),
#endif
};

static struct regulator_consumer_supply vreg_consumers_EXT_1P8V[] = {
	REGULATOR_SUPPLY("cam_ov5647_vdd", "0-006c"),
	REGULATOR_SUPPLY("cam_ov5647_truly_cm6868_vdd", "0-006c"),
	REGULATOR_SUPPLY("cam_ov7692_vdd", "0-0078"),
	REGULATOR_SUPPLY("cam_ov8825_vdd", "0-000d"),
	REGULATOR_SUPPLY("lcd_vddi", "mipi_dsi.1"),

开发者ID:DeltaDroidTeam，项目名称:android_kernel_dns_s4503，代码行数:31，代码来源:board-qrd7627a.c

示例16: ARRAY_SIZE

		.type2 = -1 },
	{ .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1,
		.type2 = -1 },
	{ .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1,
		.type2 = -1 },
	{ 0, 0},
};

static struct twl4030_power_data omap3_power_pdata = {
	.scripts	= omap3_power_scripts,
	.num		= ARRAY_SIZE(omap3_power_scripts),
	.resource_config = omap3_rconfig,
};

static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};

static struct regulator_init_data omap3_vdac_idata = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 1800000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(omap3_vdda_dac_supplies),
	.consumer_supplies	= omap3_vdda_dac_supplies,
};

开发者ID:SynerconTechnologies，项目名称:FLA-Kernel，代码行数:30，代码来源:twl-common.c

示例17: REGULATOR_SUPPLY

static struct regulator_init_data pwgtx_init = {
	.constraints = {
		.boot_on	= 1,
		.always_on	= 1,
	},
};

static struct regulator_init_data gpo_init = {
	.constraints = {
		.boot_on = 1,
		.always_on = 1,
	}
};

static struct regulator_consumer_supply vmmc2_consumers[] = {
	REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
};

static struct regulator_init_data vmmc2_init = {
	.constraints = {
		.min_uV = 3000000,
		.max_uV = 3000000,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
				  REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
	.consumer_supplies = vmmc2_consumers,
};

static struct regulator_consumer_supply vmmc1_consumers[] = {
	REGULATOR_SUPPLY("vcore", "spi0.0"),

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:31，代码来源:mach-mx31_3ds.c

示例18: REGULATOR_SUPPLY

#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/pinmux.h>
#include <mach/edp.h>

#include "gpio-names.h"
#include "board.h"
#include "board-cardhu.h"
#include "wakeups-t3.h"

#define PMC_CTRL		0x0
#define PMC_CTRL_INTR_LOW	(1 << 17)

static struct regulator_consumer_supply ricoh583_dc1_supply_skubit0_0[] = {
	REGULATOR_SUPPLY("vdd_core", NULL),
	REGULATOR_SUPPLY("en_vddio_ddr_1v2", NULL),
};

static struct regulator_consumer_supply ricoh583_dc1_supply_skubit0_1[] = {
	REGULATOR_SUPPLY("en_vddio_ddr_1v2", NULL),
};

static struct regulator_consumer_supply ricoh583_dc3_supply_0[] = {
	REGULATOR_SUPPLY("vdd_gen1v5", NULL),
	REGULATOR_SUPPLY("vcore_lcd", NULL),
	REGULATOR_SUPPLY("track_ldo1", NULL),
	REGULATOR_SUPPLY("external_ldo_1v2", NULL),
	REGULATOR_SUPPLY("vcore_cam1", NULL),
	REGULATOR_SUPPLY("vcore_cam2", NULL),
};

开发者ID:Kick-Buttowski，项目名称:LiteKernel---Glide，代码行数:30，代码来源:board-cardhu-pm299-power-rails.c

示例19: defined

 */

#include <linux/i2c.h>
#include <linux/regulator/machine.h>
#include <plat/gpio-cfg.h>
#include <mach/gpio-midas.h>
#include <mach/irqs.h>

#include <linux/mfd/max77686.h>

#if defined(CONFIG_REGULATOR_MAX77686)
/* max77686 */

#ifdef CONFIG_SND_SOC_WM8994
static struct regulator_consumer_supply ldo3_supply[] = {
	REGULATOR_SUPPLY("AVDD2", NULL),
	REGULATOR_SUPPLY("CPVDD", NULL),
	REGULATOR_SUPPLY("DBVDD1", NULL),
	REGULATOR_SUPPLY("DBVDD2", NULL),
	REGULATOR_SUPPLY("DBVDD3", NULL),
};
#else
static struct regulator_consumer_supply ldo3_supply[] = {};
#endif

static struct regulator_consumer_supply ldo5_supply[] = {
	REGULATOR_SUPPLY("vcc_1.8v", NULL),
	REGULATOR_SUPPLY("touchkey", NULL), /*touchkey*/
};

static struct regulator_consumer_supply ldo8_supply[] = {

开发者ID:Andro-Boy，项目名称:Googy-Max2-Kernel，代码行数:31，代码来源:kona-power.c

示例20: VREG_CONSUMERS

#include <linux/platform_device.h>
#include <linux/regulator/pm8xxx-regulator.h>
#include <linux/regulator/gpio-regulator.h>
#include <mach/rpm-regulator.h>

#include "board-ville.h"

#define VREG_CONSUMERS(_id) \
	static struct regulator_consumer_supply vreg_consumers_##_id[]

/*
 * Consumer specific regulator names:
 *			 regulator name		consumer dev_name
 */
VREG_CONSUMERS(L1) = {
	REGULATOR_SUPPLY("8921_l1",		NULL),
};
VREG_CONSUMERS(L2) = {
	REGULATOR_SUPPLY("8921_l2",		NULL),
	REGULATOR_SUPPLY("dsi_vdda",		"mipi_dsi.1"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_camera_imx074.0"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_camera_ov2720.0"),
	REGULATOR_SUPPLY("mipi_csi_vdd",	"msm_camera_qs_mt9p017.0"),
};
VREG_CONSUMERS(L3) = {
	REGULATOR_SUPPLY("8921_l3",		NULL),
	REGULATOR_SUPPLY("HSUSB_3p3",		"msm_otg"),
};
VREG_CONSUMERS(L4) = {
	REGULATOR_SUPPLY("8921_l4",		NULL),
	REGULATOR_SUPPLY("HSUSB_1p8",		"msm_otg"),

开发者ID:KIMMINWOO，项目名称:FusionUlt-AOSP-MR1，代码行数:31，代码来源:board-ville-regulator.c

注：本文中的REGULATOR_SUPPLY函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ REG_CLR_BIT函数代码示例发布时间：2022-05-30

C++ REGISTER_SOLVER函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19287|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10021|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8344|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8714|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8658|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9688|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8647|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8014|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8683|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7550|2022-11-06

客服电话

电子邮件

C++ REGULATOR_SUPPLY函数代码示例

示例1: REGULATOR_SUPPLY

示例2: defined

示例3: omap_ethernet_init

示例4: PCOM_VREG_NCP

示例5: gpio_export

示例6: defined

示例7: pcf8575_cir_enable

示例8: GPIO_KEY

示例9: ARRAY_SIZE

示例10: ek_add_device_buttons

示例11: VREG_CONSUMERS

示例12: defined

示例13: VREG_CONSUMERS

示例14: REGULATOR_SUPPLY

示例15: ARRAY_SIZE

示例16: ARRAY_SIZE

示例17: REGULATOR_SUPPLY

示例18: REGULATOR_SUPPLY

示例19: defined

示例20: VREG_CONSUMERS

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2115

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053