本文整理汇总了C++中QUEUE_REMOVE函数的典型用法代码示例。如果您正苦于以下问题：C++ QUEUE_REMOVE函数的具体用法？C++ QUEUE_REMOVE怎么用？C++ QUEUE_REMOVE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了QUEUE_REMOVE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: uv_udp_init_ex
int uv_udp_init_ex(uv_loop_t* loop, uv_udp_t* handle, unsigned int flags) {
int domain;
/* Use the lower 8 bits for the domain */
domain = flags & 0xFF;
if (domain != AF_INET && domain != AF_INET6 && domain != AF_UNSPEC)
return UV_EINVAL;
if (flags & ~0xFF)
return UV_EINVAL;
uv__handle_init(loop, (uv_handle_t*) handle, UV_UDP);
handle->socket = INVALID_SOCKET;
handle->reqs_pending = 0;
handle->activecnt = 0;
handle->func_wsarecv = WSARecv;
handle->func_wsarecvfrom = WSARecvFrom;
handle->send_queue_size = 0;
handle->send_queue_count = 0;
uv_req_init(loop, (uv_req_t*) &(handle->recv_req));
handle->recv_req.type = UV_UDP_RECV;
handle->recv_req.data = handle;
/* If anything fails beyond this point we need to remove the handle from
* the handle queue, since it was added by uv__handle_init.
*/
if (domain != AF_UNSPEC) {
SOCKET sock;
DWORD err;
sock = socket(domain, SOCK_DGRAM, 0);
if (sock == INVALID_SOCKET) {
err = WSAGetLastError();
QUEUE_REMOVE(&handle->handle_queue);
return uv_translate_sys_error(err);
}
err = uv_udp_set_socket(handle->loop, handle, sock, domain);
if (err) {
closesocket(sock);
QUEUE_REMOVE(&handle->handle_queue);
return uv_translate_sys_error(err);
}
}
return 0;
}
开发者ID:0-wiz-0，项目名称:libuv，代码行数:48，代码来源:udp.c
示例2: uv__io_close
void uv__io_close(uv_loop_t* loop, uv__io_t* w) {
uv__io_stop(loop, w, POLLIN | POLLOUT | UV__POLLRDHUP);
QUEUE_REMOVE(&w->pending_queue);
/* Remove stale events for this file descriptor */
uv__platform_invalidate_fd(loop, w->fd);
}
开发者ID:Fantasticer，项目名称:libuv，代码行数:7，代码来源:core.c
示例3: uv__cf_loop_cb
static void uv__cf_loop_cb(void* arg) {
uv_loop_t* loop;
QUEUE* item;
QUEUE split_head;
uv__cf_loop_signal_t* s;
loop = arg;
uv_mutex_lock(&loop->cf_mutex);
QUEUE_INIT(&split_head);
if (!QUEUE_EMPTY(&loop->cf_signals)) {
QUEUE* split_pos = QUEUE_HEAD(&loop->cf_signals);
QUEUE_SPLIT(&loop->cf_signals, split_pos, &split_head);
}
uv_mutex_unlock(&loop->cf_mutex);
while (!QUEUE_EMPTY(&split_head)) {
item = QUEUE_HEAD(&split_head);
s = QUEUE_DATA(item, uv__cf_loop_signal_t, member);
/* This was a termination signal */
if (s->cb == NULL)
CFRunLoopStop(loop->cf_loop);
else
s->cb(s->arg);
QUEUE_REMOVE(item);
free(s);
}
}
开发者ID:70s-dad，项目名称:node，代码行数:31，代码来源:darwin.c
示例4: uv__io_stop
void uv__io_stop(uv_loop_t* loop, uv__io_t* w, unsigned int events) {
assert(0 == (events & ~(POLLIN | POLLOUT | UV__POLLRDHUP)));
assert(0 != events);
if (w->fd == -1)
return;
assert(w->fd >= 0);
/* Happens when uv__io_stop() is called on a handle that was never started. */
if ((unsigned) w->fd >= loop->nwatchers)
return;
w->pevents &= ~events;
if (w->pevents == 0) {
QUEUE_REMOVE(&w->watcher_queue);
QUEUE_INIT(&w->watcher_queue);
if (loop->watchers[w->fd] != NULL) {
assert(loop->watchers[w->fd] == w);
assert(loop->nfds > 0);
loop->watchers[w->fd] = NULL;
loop->nfds--;
w->events = 0;
}
}
else if (QUEUE_EMPTY(&w->watcher_queue))
QUEUE_INSERT_TAIL(&loop->watcher_queue, &w->watcher_queue);
}
开发者ID:Fantasticer，项目名称:libuv，代码行数:30，代码来源:core.c
示例5: uv__work_done
void uv__work_done(uv_async_t* handle) {
struct uv__work* w;
uv_loop_t* loop;
QUEUE* q;
QUEUE wq;
int err;
loop = container_of(handle, uv_loop_t, wq_async);
QUEUE_INIT(&wq);
uv_mutex_lock(&loop->wq_mutex);
if (!QUEUE_EMPTY(&loop->wq)) {
q = QUEUE_HEAD(&loop->wq);
QUEUE_SPLIT(&loop->wq, q, &wq);
}
uv_mutex_unlock(&loop->wq_mutex);
while (!QUEUE_EMPTY(&wq)) {
q = QUEUE_HEAD(&wq);
QUEUE_REMOVE(q);
w = container_of(q, struct uv__work, wq);
err = (w->work == uv__cancelled) ? UV_ECANCELED : 0;
w->done(w, err);
}
}
开发者ID:1234-，项目名称:passenger，代码行数:26，代码来源:threadpool.c
示例6: uv__udp_finish_close
void uv__udp_finish_close(uv_udp_t* handle) {
uv_udp_send_t* req;
QUEUE* q;
assert(!uv__io_active(&handle->io_watcher, UV__POLLIN | UV__POLLOUT));
assert(handle->io_watcher.fd == -1);
while (!QUEUE_EMPTY(&handle->write_queue)) {
q = QUEUE_HEAD(&handle->write_queue);
QUEUE_REMOVE(q);
req = QUEUE_DATA(q, uv_udp_send_t, queue);
req->status = -ECANCELED;
QUEUE_INSERT_TAIL(&handle->write_completed_queue, &req->queue);
}
uv__udp_run_completed(handle);
assert(handle->send_queue_size == 0);
assert(handle->send_queue_count == 0);
/* Now tear down the handle. */
handle->recv_cb = NULL;
handle->alloc_cb = NULL;
/* but _do not_ touch close_cb */
}
开发者ID:Muraad，项目名称:harmony，代码行数:26，代码来源:udp.c
示例7: uv__udp_run_completed
static void uv__udp_run_completed(uv_udp_t* handle) {
uv_udp_send_t* req;
QUEUE* q;
while (!QUEUE_EMPTY(&handle->write_completed_queue)) {
q = QUEUE_HEAD(&handle->write_completed_queue);
QUEUE_REMOVE(q);
req = QUEUE_DATA(q, uv_udp_send_t, queue);
uv__req_unregister(handle->loop, req);
if (req->bufs != req->bufsml)
free(req->bufs);
req->bufs = NULL;
if (req->send_cb == NULL)
continue;
/* req->status >= 0 == bytes written
* req->status < 0 == errno
*/
if (req->status >= 0)
req->send_cb(req, 0);
else
req->send_cb(req, req->status);
}
}
开发者ID:AmericanDragon1976，项目名称:libuv，代码行数:27，代码来源:udp.c
示例8: uv__udp_finish_close
void uv__udp_finish_close(uv_udp_t* handle) {
uv_udp_send_t* req;
QUEUE* q;
assert(!uv__io_active(&handle->io_watcher, UV__POLLIN | UV__POLLOUT));
assert(handle->io_watcher.fd == -1);
uv__udp_run_completed(handle);
while (!QUEUE_EMPTY(&handle->write_queue)) {
q = QUEUE_HEAD(&handle->write_queue);
QUEUE_REMOVE(q);
req = QUEUE_DATA(q, uv_udp_send_t, queue);
uv__req_unregister(handle->loop, req);
if (req->bufs != req->bufsml)
free(req->bufs);
req->bufs = NULL;
if (req->send_cb != NULL)
req->send_cb(req, -ECANCELED);
}
/* Now tear down the handle. */
handle->recv_cb = NULL;
handle->alloc_cb = NULL;
/* but _do not_ touch close_cb */
}
开发者ID:AmericanDragon1976，项目名称:libuv，代码行数:29，代码来源:udp.c
示例9: uv_tcp_init_ex
int uv_tcp_init_ex(uv_loop_t* loop, uv_tcp_t* tcp, unsigned int flags) {
int domain;
/* Use the lower 8 bits for the domain */
domain = flags & 0xFF;
if (domain != AF_INET && domain != AF_INET6 && domain != AF_UNSPEC)
return -EINVAL;
if (flags & ~0xFF)
return -EINVAL;
uv__stream_init(loop, (uv_stream_t*)tcp, UV_TCP);
/* If anything fails beyond this point we need to remove the handle from
* the handle queue, since it was added by uv__handle_init in uv_stream_init.
*/
if (domain != AF_UNSPEC) {
int err = maybe_new_socket(tcp, domain, 0);
if (err) {
QUEUE_REMOVE(&tcp->handle_queue);
return err;
}
}
return 0;
}
开发者ID:AndreasBriese，项目名称:node9，代码行数:27，代码来源:tcp.c
示例10: uv__cf_loop_cb
void uv__cf_loop_cb(void* arg) {
uv_loop_t* loop;
QUEUE* item;
QUEUE split_head;
uv__cf_loop_signal_t* s;
loop = arg;
uv_mutex_lock(&loop->cf_mutex);
QUEUE_INIT(&split_head);
if (!QUEUE_EMPTY(&loop->cf_signals)) {
QUEUE* split_pos = QUEUE_HEAD(&loop->cf_signals);
QUEUE_SPLIT(&loop->cf_signals, split_pos, &split_head);
}
uv_mutex_unlock(&loop->cf_mutex);
while (!QUEUE_EMPTY(&split_head)) {
item = QUEUE_HEAD(&split_head);
s = QUEUE_DATA(item, uv__cf_loop_signal_t, member);
s->cb(s->arg);
QUEUE_REMOVE(item);
free(s);
}
}
开发者ID:1GHL，项目名称:learn_libuv，代码行数:26，代码来源:darwin.c
示例11: uv__write_callbacks
static void uv__write_callbacks(uv_stream_t* stream) {
uv_write_t* req;
QUEUE* q;
while (!QUEUE_EMPTY(&stream->write_completed_queue)) {
/* Pop a req off write_completed_queue. */
q = QUEUE_HEAD(&stream->write_completed_queue);
req = QUEUE_DATA(q, uv_write_t, queue);
QUEUE_REMOVE(q);
uv__req_unregister(stream->loop, req);
if (req->bufs != NULL) {
stream->write_queue_size -= uv__write_req_size(req);
if (req->bufs != req->bufsml)
free(req->bufs);
req->bufs = NULL;
}
/* NOTE: call callback AFTER freeing the request data. */
if (req->cb)
req->cb(req, req->error);
}
assert(QUEUE_EMPTY(&stream->write_completed_queue));
}
开发者ID:esevan，项目名称:libtuv，代码行数:25，代码来源:uv_mbed_stream.c
示例12: uv__io_start
void uv__io_start(uv_loop_t* loop, uv__io_t* w, unsigned int events) {
assert(0 == (events & ~(POLLIN | POLLOUT | UV__POLLRDHUP)));
assert(0 != events);
assert(w->fd >= 0);
assert(w->fd < INT_MAX);
w->pevents |= events;
maybe_resize(loop, w->fd + 1);
#if !defined(__sun)
/* The event ports backend needs to rearm all file descriptors on each and
* every tick of the event loop but the other backends allow us to
* short-circuit here if the event mask is unchanged.
*/
if (w->events == w->pevents) {
if (w->events == 0 && !QUEUE_EMPTY(&w->watcher_queue)) {
QUEUE_REMOVE(&w->watcher_queue);
QUEUE_INIT(&w->watcher_queue);
}
return;
}
#endif
if (QUEUE_EMPTY(&w->watcher_queue))
QUEUE_INSERT_TAIL(&loop->watcher_queue, &w->watcher_queue);
if (loop->watchers[w->fd] == NULL) {
loop->watchers[w->fd] = w;
loop->nfds++;
}
}
开发者ID:Fantasticer，项目名称:libuv，代码行数:31，代码来源:core.c
示例13: uv__work_done
void uv__work_done(uv_async_t* handle) {
struct uv__work* w;
uv_loop_t* loop;
QUEUE* q;
QUEUE wq;
int err;
loop = container_of(handle, uv_loop_t, wq_async);
QUEUE_INIT(&wq);
// uv_mutex_lock(&loop->wq_mutex);
if (!QUEUE_EMPTY(&loop->wq)) {
q = QUEUE_HEAD(&loop->wq);
QUEUE_SPLIT(&loop->wq, q, &wq);
}
// uv_mutex_unlock(&loop->wq_mutex);
while (!QUEUE_EMPTY(&wq)) {
q = QUEUE_HEAD(&wq);
QUEUE_REMOVE(q);
w = container_of(q, struct uv__work, wq);
w->done(w, 0, NULL, 0);
}
}
开发者ID:letoche，项目名称:codius-nacl-node，代码行数:25，代码来源:threadpool.c
示例14: uv_tcp_init_ex
int uv_tcp_init_ex(uv_loop_t* loop, uv_tcp_t* handle, unsigned int flags) {
int domain;
/* Use the lower 8 bits for the domain */
domain = flags & 0xFF;
if (domain != AF_INET && domain != AF_INET6 && domain != AF_UNSPEC)
return UV_EINVAL;
if (flags & ~0xFF)
return UV_EINVAL;
uv_stream_init(loop, (uv_stream_t*) handle, UV_TCP);
handle->tcp.serv.accept_reqs = NULL;
handle->tcp.serv.pending_accepts = NULL;
handle->socket = INVALID_SOCKET;
handle->reqs_pending = 0;
handle->tcp.serv.func_acceptex = NULL;
handle->tcp.conn.func_connectex = NULL;
handle->tcp.serv.processed_accepts = 0;
handle->delayed_error = 0;
/* If anything fails beyond this point we need to remove the handle from
* the handle queue, since it was added by uv__handle_init in uv_stream_init.
*/
if (domain != AF_UNSPEC) {
SOCKET sock;
DWORD err;
sock = socket(domain, SOCK_STREAM, 0);
if (sock == INVALID_SOCKET) {
err = WSAGetLastError();
QUEUE_REMOVE(&handle->handle_queue);
return uv_translate_sys_error(err);
}
err = uv_tcp_set_socket(handle->loop, handle, sock, domain, 0);
if (err) {
closesocket(sock);
QUEUE_REMOVE(&handle->handle_queue);
return uv_translate_sys_error(err);
}
}
return 0;
}
开发者ID:AlexanderPankiv，项目名称:node，代码行数:47，代码来源:tcp.c
示例15: uv__inotify_read
static void uv__inotify_read(uv_loop_t* loop,
uv__io_t* dummy,
unsigned int events) {
const struct uv__inotify_event* e;
struct watcher_list* w;
uv_fs_event_t* h;
QUEUE queue;
QUEUE* q;
const char* path;
ssize_t size;
const char *p;
/* needs to be large enough for sizeof(inotify_event) + strlen(path) */
char buf[4096];
while (1) {
do
size = read(loop->inotify_fd, buf, sizeof(buf));
while (size == -1 && errno == EINTR);
if (size == -1) {
assert(errno == EAGAIN || errno == EWOULDBLOCK);
break;
}
assert(size > 0); /* pre-2.6.21 thing, size=0 == read buffer too small */
/* Now we have one or more inotify_event structs. */
for (p = buf; p < buf + size; p += sizeof(*e) + e->len) {
e = (const struct uv__inotify_event*)p;
events = 0;
if (e->mask & (UV__IN_ATTRIB|UV__IN_MODIFY))
events |= UV_CHANGE;
if (e->mask & ~(UV__IN_ATTRIB|UV__IN_MODIFY))
events |= UV_RENAME;
w = find_watcher(loop, e->wd);
if (w == NULL)
continue; /* Stale event, no watchers left. */
/* inotify does not return the filename when monitoring a single file
* for modifications. Repurpose the filename for API compatibility.
* I'm not convinced this is a good thing, maybe it should go.
*/
path = e->len ? (const char*) (e + 1) : uv__basename_r(w->path);
QUEUE_MOVE(&w->watchers, &queue);
while (!QUEUE_EMPTY(&queue)) {
q = QUEUE_HEAD(&queue);
h = QUEUE_DATA(q, uv_fs_event_t, watchers);
QUEUE_REMOVE(q);
QUEUE_INSERT_TAIL(&w->watchers, q);
h->cb(h, path, events, 0);
}
}
}
}
开发者ID:MaxTan，项目名称:cozy，代码行数:59，代码来源:linux-inotify.c
示例16: timer_close
int timer_close (evHandle *handle) {
handle->flags |= HANDLE_CLOSING;
timer_stop(handle);
QUEUE_REMOVE(&handle->queue);
QUEUE_INSERT_TAIL(&handle->loop->closing_queue,
&handle->queue);
return 0;
}
开发者ID:catoc，项目名称:Comojs，代码行数:8，代码来源:core.c
示例17: stack_pop
static Token stack_pop(QUEUE *stack)
{
QUEUE *h = QUEUE_HEAD(stack);
queue_item *item = queue_node_data(h);
QUEUE_REMOVE(&item->node);
Token token = item->item;
free(item);
return token;
}
开发者ID:jollywho，项目名称:nav，代码行数:9，代码来源:cmdline.c
示例18: uv__udp_run_pending
static void uv__udp_run_pending(uv_udp_t* handle) {
uv_udp_send_t* req;
QUEUE* q;
struct msghdr h;
ssize_t size;
while (!QUEUE_EMPTY(&handle->write_queue)) {
q = QUEUE_HEAD(&handle->write_queue);
assert(q != NULL);
req = QUEUE_DATA(q, uv_udp_send_t, queue);
assert(req != NULL);
memset(&h, 0, sizeof h);
h.msg_name = &req->addr;
h.msg_namelen = (req->addr.sin6_family == AF_INET6 ?
sizeof(struct sockaddr_in6) : sizeof(struct sockaddr_in));
h.msg_iov = (struct iovec*)req->bufs;
h.msg_iovlen = req->bufcnt;
do {
size = sendmsg(handle->io_watcher.fd, &h, 0);
}
while (size == -1 && errno == EINTR);
/* TODO try to write once or twice more in the
* hope that the socket becomes readable again?
*/
if (size == -1 && (errno == EAGAIN || errno == EWOULDBLOCK))
break;
req->status = (size == -1 ? -errno : size);
#ifndef NDEBUG
/* Sanity check. */
if (size != -1) {
ssize_t nbytes;
int i;
for (nbytes = i = 0; i < req->bufcnt; i++)
nbytes += req->bufs[i].len;
assert(size == nbytes);
}
#endif
/* Sending a datagram is an atomic operation: either all data
* is written or nothing is (and EMSGSIZE is raised). That is
* why we don't handle partial writes. Just pop the request
* off the write queue and onto the completed queue, done.
*/
QUEUE_REMOVE(&req->queue);
QUEUE_INSERT_TAIL(&handle->write_completed_queue, &req->queue);
}
}
开发者ID:AmericanDragon1976，项目名称:libuv，代码行数:55，代码来源:udp.c
示例19: loop_run_immediate
static void loop_run_immediate(evLoop *loop) {
QUEUE *q;
evHandle *handle;
while ( !QUEUE_EMPTY(&loop->handle_queue) ){
q = QUEUE_HEAD(&(loop)->handle_queue);
QUEUE_REMOVE(q);
handle = QUEUE_DATA(q, evHandle, queue);
assert(handle);
handle->cb(handle);
}
}
开发者ID:catoc，项目名称:Comojs，代码行数:11，代码来源:core.c
示例20: queue_pop
static Event queue_pop(Queue *queue)
{
QUEUE *h = QUEUE_HEAD(&queue->headtail);
queue_item *item = queue_node_data(h);
QUEUE_REMOVE(&item->node);
Event e;
e = item->item;
free(item);
return e;
}
开发者ID:jollywho，项目名称:nav，代码行数:11，代码来源:event.c
注：本文中的QUEUE_REMOVE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论