C++ QLCRD32函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中QLCRD32函数的典型用法代码示例。如果您正苦于以下问题：C++ QLCRD32函数的具体用法？C++ QLCRD32怎么用？C++ QLCRD32使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了QLCRD32函数的19个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: qlcnic_set_wol

static int
qlcnic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 wol_cfg;

	if (qlcnic_83xx_check(adapter))
		return -EOPNOTSUPP;
	if (wol->wolopts & ~WAKE_MAGIC)
		return -EINVAL;

	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
	if (!(wol_cfg & (1 << adapter->portnum)))
		return -EOPNOTSUPP;

	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
	if (wol->wolopts & WAKE_MAGIC)
		wol_cfg |= 1UL << adapter->portnum;
	else
		wol_cfg &= ~(1UL << adapter->portnum);

	QLCWR32(adapter, QLCNIC_WOL_CONFIG, wol_cfg);

	return 0;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:25，代码来源:qlcnic_ethtool.c

示例2: qlcnic_get_pauseparam

static void
qlcnic_get_pauseparam(struct net_device *netdev,
			  struct ethtool_pauseparam *pause)
{
	struct qlcnic_adapter *adapter = netdev_priv(netdev);
	int port = adapter->ahw->physical_port;
	int err = 0;
	__u32 val;

	if (qlcnic_83xx_check(adapter)) {
		qlcnic_83xx_get_pauseparam(adapter, pause);
		return;
	}
	if (adapter->ahw->port_type == QLCNIC_GBE) {
		if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
			return;
		/* get flow control settings */
		val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), &err);
		if (err == -EIO)
			return;
		pause->rx_pause = qlcnic_gb_get_rx_flowctl(val);
		val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, &err);
		if (err == -EIO)
			return;
		switch (port) {
		case 0:
			pause->tx_pause = !(qlcnic_gb_get_gb0_mask(val));
			break;
		case 1:
			pause->tx_pause = !(qlcnic_gb_get_gb1_mask(val));
			break;
		case 2:
			pause->tx_pause = !(qlcnic_gb_get_gb2_mask(val));
			break;
		case 3:
		default:
			pause->tx_pause = !(qlcnic_gb_get_gb3_mask(val));
			break;
		}
	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
		if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
			return;
		pause->rx_pause = 1;
		val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, &err);
		if (err == -EIO)
			return;
		if (port == 0)
			pause->tx_pause = !(qlcnic_xg_get_xg0_mask(val));
		else
			pause->tx_pause = !(qlcnic_xg_get_xg1_mask(val));
	} else {
		dev_err(&netdev->dev, "Unknown board type: %x\n",
					adapter->ahw->port_type);
	}
}

开发者ID:PKUCloud，项目名称:samsara-linux-3.11，代码行数:55，代码来源:qlcnic_ethtool.c

示例3: qlcnic_get_drvinfo

static void
qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 fw_major, fw_minor, fw_build;

	fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR);
	fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR);
	fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB);
	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);

	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
	strlcpy(drvinfo->driver, qlcnic_driver_name, 32);
	strlcpy(drvinfo->version, QLCNIC_LINUX_VERSIONID, 32);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:15，代码来源:qlcnic_ethtool.c

示例4: qlcnic_get_wol

static void
qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 wol_cfg;

	wol->supported = 0;
	wol->wolopts = 0;

	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
	if (wol_cfg & (1UL << adapter->portnum))
		wol->supported |= WAKE_MAGIC;

	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
	if (wol_cfg & (1UL << adapter->portnum))
		wol->wolopts |= WAKE_MAGIC;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:17，代码来源:qlcnic_ethtool.c

示例5: qlcnic_test_link

static u32 qlcnic_test_link(struct net_device *dev)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 val;

	val = QLCRD32(adapter, CRB_XG_STATE_P3P);
	val = XG_LINK_STATE_P3P(adapter->ahw.pci_func, val);
	return (val == XG_LINK_UP_P3P) ? 0 : 1;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:9，代码来源:qlcnic_ethtool.c

示例6: qlcnic_reg_test

static int qlcnic_reg_test(struct net_device *dev)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 data_read;

	data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0));
	if ((data_read & 0xffff) != adapter->pdev->vendor)
		return 1;

	return 0;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:11，代码来源:qlcnic_ethtool.c

示例7: qlcnic_82xx_get_registers

static int qlcnic_82xx_get_registers(struct qlcnic_adapter *adapter,
				     u32 *regs_buff)
{
	int i, j = 0;

	for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++)
		regs_buff[i] = QLC_SHARED_REG_RD32(adapter, diag_registers[j]);
	j = 0;
	while (ext_diag_registers[j] != -1)
		regs_buff[i++] = QLCRD32(adapter, ext_diag_registers[j++]);
	return i;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:12，代码来源:qlcnic_ethtool.c

示例8: qlcnic_get_wol

static void
qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 wol_cfg;
	int err = 0;

	if (qlcnic_83xx_check(adapter))
		return;
	wol->supported = 0;
	wol->wolopts = 0;

	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV, &err);
	if (err == -EIO)
		return;
	if (wol_cfg & (1UL << adapter->portnum))
		wol->supported |= WAKE_MAGIC;

	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG, &err);
	if (wol_cfg & (1UL << adapter->portnum))
		wol->wolopts |= WAKE_MAGIC;
}

开发者ID:PKUCloud，项目名称:samsara-linux-3.11，代码行数:22，代码来源:qlcnic_ethtool.c

示例9: qlcnic_test_link

static u32 qlcnic_test_link(struct net_device *dev)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 val;

	if (qlcnic_83xx_check(adapter)) {
		val = qlcnic_83xx_test_link(adapter);
		return (val & 1) ? 0 : 1;
	}
	val = QLCRD32(adapter, CRB_XG_STATE_P3P);
	val = XG_LINK_STATE_P3P(adapter->ahw->pci_func, val);
	return (val == XG_LINK_UP_P3P) ? 0 : 1;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:13，代码来源:qlcnic_ethtool.c

示例10: qlcnic_get_eswitch_capabilities

/* Get eSwitch Capabilities */
int qlcnic_get_eswitch_capabilities(struct qlcnic_adapter *adapter, u8 port,
					struct qlcnic_eswitch *eswitch)
{
	int err = -EIO;
	u32 arg1, arg2;

	if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC)
		return err;

	err = qlcnic_issue_cmd(adapter,
			adapter->ahw.pci_func,
			adapter->fw_hal_version,
			port,
			0,
			0,
			QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY);

	if (err == QLCNIC_RCODE_SUCCESS) {
		arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
		arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);

		eswitch->port = arg1 & 0xf;
		eswitch->active_vports = LSB(arg2);
		eswitch->max_ucast_filters = MSB(arg2);
		eswitch->max_active_vlans = LSB(MSW(arg2));
		if (arg1 & BIT_6)
			eswitch->flags |= QLCNIC_SWITCH_VLAN_FILTERING;
		if (arg1 & BIT_7)
			eswitch->flags |= QLCNIC_SWITCH_PROMISC_MODE;
		if (arg1 & BIT_8)
			eswitch->flags |= QLCNIC_SWITCH_PORT_MIRRORING;
	} else {
		dev_err(&adapter->pdev->dev,
			"Failed to get eswitch capabilities%d\n", err);
	}

	return err;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:39，代码来源:qlcnic_ctx.c

示例11: qlcnic_reg_test

static int qlcnic_reg_test(struct net_device *dev)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	u32 data_read;
	int err = 0;

	if (qlcnic_83xx_check(adapter))
		return qlcnic_83xx_reg_test(adapter);

	data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0), &err);
	if (err == -EIO)
		return err;
	if ((data_read & 0xffff) != adapter->pdev->vendor)
		return 1;

	return 0;
}

开发者ID:PKUCloud，项目名称:samsara-linux-3.11，代码行数:17，代码来源:qlcnic_ethtool.c

示例12: qlcnic_fw_cmd_query_phy

int
qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
{

	if (qlcnic_issue_cmd(adapter,
			adapter->ahw.pci_func,
			adapter->fw_hal_version,
			reg,
			0,
			0,
			QLCNIC_CDRP_CMD_READ_PHY)) {

		return -EIO;
	}

	return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:17，代码来源:qlcnic_ctx.c

示例13: qlcnic_poll_rsp

static u32
qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
{
	u32 rsp;
	int timeout = 0;

	do {
		/* give atleast 1ms for firmware to respond */
		msleep(1);

		if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT)
			return QLCNIC_CDRP_RSP_TIMEOUT;

		rsp = QLCRD32(adapter, QLCNIC_CDRP_CRB_OFFSET);
	} while (!QLCNIC_CDRP_IS_RSP(rsp));

	return rsp;
}

开发者ID:Core2idiot，项目名称:Kernel-Samsung-3.0...-，代码行数:18，代码来源:qlcnic_ctx.c

示例14: qlcnic_get_regs

static void
qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
	struct qlcnic_host_sds_ring *sds_ring;
	u32 *regs_buff = p;
	int ring, i = 0, j = 0;

	memset(p, 0, qlcnic_get_regs_len(dev));
	regs->version = (QLCNIC_ETHTOOL_REGS_VER << 24) |
		(adapter->ahw.revision_id << 16) | (adapter->pdev)->device;

	regs_buff[0] = (0xcafe0000 | (QLCNIC_DEV_INFO_SIZE & 0xffff));
	regs_buff[1] = QLCNIC_MGMT_API_VERSION;

	for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++)
		regs_buff[i] = QLCRD32(adapter, diag_registers[j]);

	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
		return;

	regs_buff[i++] = 0xFFEFCDAB; /* Marker btw regs and ring count*/

	regs_buff[i++] = 1; /* No. of tx ring */
	regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer));
	regs_buff[i++] = readl(adapter->tx_ring->crb_cmd_producer);

	regs_buff[i++] = 2; /* No. of rx ring */
	regs_buff[i++] = readl(recv_ctx->rds_rings[0].crb_rcv_producer);
	regs_buff[i++] = readl(recv_ctx->rds_rings[1].crb_rcv_producer);

	regs_buff[i++] = adapter->max_sds_rings;

	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
		sds_ring = &(recv_ctx->sds_rings[ring]);
		regs_buff[i++] = readl(sds_ring->crb_sts_consumer);
	}
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:39，代码来源:qlcnic_ethtool.c

示例15: qlcnic_issue_cmd

u32
qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd)
{
	u32 rsp;
	u32 signature;
	u32 rcode = QLCNIC_RCODE_SUCCESS;
	struct pci_dev *pdev = adapter->pdev;

	signature = QLCNIC_CDRP_SIGNATURE_MAKE(pci_fn, version);

	/* Acquire semaphore before accessing CRB */
	if (qlcnic_api_lock(adapter))
		return QLCNIC_RCODE_TIMEOUT;

	QLCWR32(adapter, QLCNIC_SIGN_CRB_OFFSET, signature);
	QLCWR32(adapter, QLCNIC_ARG1_CRB_OFFSET, arg1);
	QLCWR32(adapter, QLCNIC_ARG2_CRB_OFFSET, arg2);
	QLCWR32(adapter, QLCNIC_ARG3_CRB_OFFSET, arg3);
	QLCWR32(adapter, QLCNIC_CDRP_CRB_OFFSET, QLCNIC_CDRP_FORM_CMD(cmd));

	rsp = qlcnic_poll_rsp(adapter);

	if (rsp == QLCNIC_CDRP_RSP_TIMEOUT) {
		dev_err(&pdev->dev, "card response timeout.\n");
		rcode = QLCNIC_RCODE_TIMEOUT;
	} else if (rsp == QLCNIC_CDRP_RSP_FAIL) {
		rcode = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
		dev_err(&pdev->dev, "failed card response code:0x%x\n",
				rcode);
	}

	/* Release semaphore */
	qlcnic_api_unlock(adapter);

	return rcode;
}

开发者ID:Core2idiot，项目名称:Kernel-Samsung-3.0...-，代码行数:37，代码来源:qlcnic_ctx.c

示例16: qlcnic_get_regs

static void
qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
	struct qlcnic_host_sds_ring *sds_ring;
	u32 *regs_buff = p;
	int ring, i = 0;

	memset(p, 0, qlcnic_get_regs_len(dev));
	regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
	    (adapter->pdev)->device;

	for (i = 0; diag_registers[i] != -1; i++)
		regs_buff[i] = QLCRD32(adapter, diag_registers[i]);

	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
		return;

	regs_buff[i++] = 0xFFEFCDAB; /* Marker btw regs and ring count*/

	regs_buff[i++] = 1; /* No. of tx ring */
	regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer));
	regs_buff[i++] = readl(adapter->tx_ring->crb_cmd_producer);

	regs_buff[i++] = 2; /* No. of rx ring */
	regs_buff[i++] = readl(recv_ctx->rds_rings[0].crb_rcv_producer);
	regs_buff[i++] = readl(recv_ctx->rds_rings[1].crb_rcv_producer);

	regs_buff[i++] = adapter->max_sds_rings;

	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
		sds_ring = &(recv_ctx->sds_rings[ring]);
		regs_buff[i++] = readl(sds_ring->crb_sts_consumer);
	}
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:36，代码来源:qlcnic_ethtool.c

示例17: qlcnic_set_pauseparam

static int
qlcnic_set_pauseparam(struct net_device *netdev,
			  struct ethtool_pauseparam *pause)
{
	struct qlcnic_adapter *adapter = netdev_priv(netdev);
	int port = adapter->ahw->physical_port;
	__u32 val;

	if (qlcnic_83xx_check(adapter))
		return qlcnic_83xx_set_pauseparam(adapter, pause);

	/* read mode */
	if (adapter->ahw->port_type == QLCNIC_GBE) {
		if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
			return -EIO;
		/* set flow control */
		val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port));

		if (pause->rx_pause)
			qlcnic_gb_rx_flowctl(val);
		else
			qlcnic_gb_unset_rx_flowctl(val);

		QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port),
				val);
		QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), val);
		/* set autoneg */
		val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL);
		switch (port) {
		case 0:
			if (pause->tx_pause)
				qlcnic_gb_unset_gb0_mask(val);
			else
				qlcnic_gb_set_gb0_mask(val);
			break;
		case 1:
			if (pause->tx_pause)
				qlcnic_gb_unset_gb1_mask(val);
			else
				qlcnic_gb_set_gb1_mask(val);
			break;
		case 2:
			if (pause->tx_pause)
				qlcnic_gb_unset_gb2_mask(val);
			else
				qlcnic_gb_set_gb2_mask(val);
			break;
		case 3:
		default:
			if (pause->tx_pause)
				qlcnic_gb_unset_gb3_mask(val);
			else
				qlcnic_gb_set_gb3_mask(val);
			break;
		}
		QLCWR32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, val);
	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
		if (!pause->rx_pause || pause->autoneg)
			return -EOPNOTSUPP;

		if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
			return -EIO;

		val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL);
		if (port == 0) {
			if (pause->tx_pause)
				qlcnic_xg_unset_xg0_mask(val);
			else
				qlcnic_xg_set_xg0_mask(val);
		} else {
			if (pause->tx_pause)
				qlcnic_xg_unset_xg1_mask(val);
			else
				qlcnic_xg_set_xg1_mask(val);
		}
		QLCWR32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, val);
	} else {
		dev_err(&netdev->dev, "Unknown board type: %x\n",
				adapter->ahw->port_type);
	}
	return 0;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:82，代码来源:qlcnic_ethtool.c

示例18: qlcnic_82xx_get_settings

int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
			     struct ethtool_cmd *ecmd)
{
	struct qlcnic_hardware_context *ahw = adapter->ahw;
	u32 speed, reg;
	int check_sfp_module = 0;
	u16 pcifn = ahw->pci_func;

	/* read which mode */
	if (adapter->ahw->port_type == QLCNIC_GBE) {
		ecmd->supported = (SUPPORTED_10baseT_Half |
				   SUPPORTED_10baseT_Full |
				   SUPPORTED_100baseT_Half |
				   SUPPORTED_100baseT_Full |
				   SUPPORTED_1000baseT_Half |
				   SUPPORTED_1000baseT_Full);

		ecmd->advertising = (ADVERTISED_100baseT_Half |
				     ADVERTISED_100baseT_Full |
				     ADVERTISED_1000baseT_Half |
				     ADVERTISED_1000baseT_Full);

		ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
		ecmd->duplex = adapter->ahw->link_duplex;
		ecmd->autoneg = adapter->ahw->link_autoneg;

	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
		u32 val = 0;
		val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);

		if (val == QLCNIC_PORT_MODE_802_3_AP) {
			ecmd->supported = SUPPORTED_1000baseT_Full;
			ecmd->advertising = ADVERTISED_1000baseT_Full;
		} else {
			ecmd->supported = SUPPORTED_10000baseT_Full;
			ecmd->advertising = ADVERTISED_10000baseT_Full;
		}

		if (netif_running(adapter->netdev) && ahw->has_link_events) {
			reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
			speed = P3P_LINK_SPEED_VAL(pcifn, reg);
			ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
			ethtool_cmd_speed_set(ecmd, ahw->link_speed);
			ecmd->autoneg = ahw->link_autoneg;
			ecmd->duplex = ahw->link_duplex;
			goto skip;
		}

		ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
		ecmd->duplex = DUPLEX_UNKNOWN;
		ecmd->autoneg = AUTONEG_DISABLE;
	} else
		return -EIO;

skip:
	ecmd->phy_address = adapter->ahw->physical_port;
	ecmd->transceiver = XCVR_EXTERNAL;

	switch (adapter->ahw->board_type) {
	case QLCNIC_BRDTYPE_P3P_REF_QG:
	case QLCNIC_BRDTYPE_P3P_4_GB:
	case QLCNIC_BRDTYPE_P3P_4_GB_MM:

		ecmd->supported |= SUPPORTED_Autoneg;
		ecmd->advertising |= ADVERTISED_Autoneg;
	case QLCNIC_BRDTYPE_P3P_10G_CX4:
	case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
	case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
		ecmd->supported |= SUPPORTED_TP;
		ecmd->advertising |= ADVERTISED_TP;
		ecmd->port = PORT_TP;
		ecmd->autoneg =  adapter->ahw->link_autoneg;
		break;
	case QLCNIC_BRDTYPE_P3P_IMEZ:
	case QLCNIC_BRDTYPE_P3P_XG_LOM:
	case QLCNIC_BRDTYPE_P3P_HMEZ:
		ecmd->supported |= SUPPORTED_MII;
		ecmd->advertising |= ADVERTISED_MII;
		ecmd->port = PORT_MII;
		ecmd->autoneg = AUTONEG_DISABLE;
		break;
	case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
	case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
	case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
		ecmd->advertising |= ADVERTISED_TP;
		ecmd->supported |= SUPPORTED_TP;
		check_sfp_module = netif_running(adapter->netdev) &&
				   ahw->has_link_events;
	case QLCNIC_BRDTYPE_P3P_10G_XFP:
		ecmd->supported |= SUPPORTED_FIBRE;
		ecmd->advertising |= ADVERTISED_FIBRE;
		ecmd->port = PORT_FIBRE;
		ecmd->autoneg = AUTONEG_DISABLE;
		break;
	case QLCNIC_BRDTYPE_P3P_10G_TP:
		if (adapter->ahw->port_type == QLCNIC_XGBE) {
			ecmd->autoneg = AUTONEG_DISABLE;
			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
			ecmd->advertising |=
				(ADVERTISED_FIBRE | ADVERTISED_TP);
//.........这里部分代码省略.........

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:101，代码来源:qlcnic_ethtool.c

示例19: qlcnic_set_dump

static int
qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
{
	int i;
	struct qlcnic_adapter *adapter = netdev_priv(netdev);
	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
	u32 state;

	switch (val->flag) {
	case QLCNIC_FORCE_FW_DUMP_KEY:
		if (!fw_dump->tmpl_hdr) {
			netdev_err(netdev, "FW dump not supported\n");
			return -ENOTSUPP;
		}
		if (!fw_dump->enable) {
			netdev_info(netdev, "FW dump not enabled\n");
			return 0;
		}
		if (fw_dump->clr) {
			netdev_info(netdev,
			"Previous dump not cleared, not forcing dump\n");
			return 0;
		}
		netdev_info(netdev, "Forcing a FW dump\n");
		qlcnic_dev_request_reset(adapter, val->flag);
		break;
	case QLCNIC_DISABLE_FW_DUMP:
		if (fw_dump->enable && fw_dump->tmpl_hdr) {
			netdev_info(netdev, "Disabling FW dump\n");
			fw_dump->enable = 0;
		}
		return 0;
	case QLCNIC_ENABLE_FW_DUMP:
		if (!fw_dump->tmpl_hdr) {
			netdev_err(netdev, "FW dump not supported\n");
			return -ENOTSUPP;
		}
		if (!fw_dump->enable) {
			netdev_info(netdev, "Enabling FW dump\n");
			fw_dump->enable = 1;
		}
		return 0;
	case QLCNIC_FORCE_FW_RESET:
		netdev_info(netdev, "Forcing a FW reset\n");
		qlcnic_dev_request_reset(adapter, val->flag);
		adapter->flags &= ~QLCNIC_FW_RESET_OWNER;
		return 0;
	case QLCNIC_SET_QUIESCENT:
	case QLCNIC_RESET_QUIESCENT:
		state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
		if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD))
			netdev_info(netdev, "Device in FAILED state\n");
		return 0;
	default:
		if (!fw_dump->tmpl_hdr) {
			netdev_err(netdev, "FW dump not supported\n");
			return -ENOTSUPP;
		}
		for (i = 0; i < ARRAY_SIZE(qlcnic_fw_dump_level); i++) {
			if (val->flag == qlcnic_fw_dump_level[i]) {
				fw_dump->tmpl_hdr->drv_cap_mask =
							val->flag;
				netdev_info(netdev, "Driver mask changed to: 0x%x\n",
					fw_dump->tmpl_hdr->drv_cap_mask);
				return 0;
			}
		}
		netdev_info(netdev, "Invalid dump level: 0x%x\n", val->flag);
		return -EINVAL;
	}
	return 0;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:72，代码来源:qlcnic_ethtool.c

注：本文中的QLCRD32函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ QLOG_ERROR函数代码示例发布时间：2022-05-30

C++ QL1S函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19283|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10018|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8343|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8712|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8657|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9686|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8646|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8014|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8683|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7550|2022-11-06

客服电话

电子邮件

C++ QLCRD32函数代码示例

示例1: qlcnic_set_wol

示例2: qlcnic_get_pauseparam

示例3: qlcnic_get_drvinfo

示例4: qlcnic_get_wol

示例5: qlcnic_test_link

示例6: qlcnic_reg_test

示例7: qlcnic_82xx_get_registers

示例8: qlcnic_get_wol

示例9: qlcnic_test_link

示例10: qlcnic_get_eswitch_capabilities

示例11: qlcnic_reg_test

示例12: qlcnic_fw_cmd_query_phy

示例13: qlcnic_poll_rsp

示例14: qlcnic_get_regs

示例15: qlcnic_issue_cmd

示例16: qlcnic_get_regs

示例17: qlcnic_set_pauseparam

示例18: qlcnic_82xx_get_settings

示例19: qlcnic_set_dump

请发表评论

全部评论

上一篇：

下一篇：

delphi学习笔记的例子

librespeed/speedtest: Self-hosted Speedt

CVE-2022-1948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053