• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ PetscViewerASCIIAddTab函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中PetscViewerASCIIAddTab函数的典型用法代码示例。如果您正苦于以下问题：C++ PetscViewerASCIIAddTab函数的具体用法？C++ PetscViewerASCIIAddTab怎么用？C++ PetscViewerASCIIAddTab使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了PetscViewerASCIIAddTab函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: value

/*@C
   KSPMonitorRange - Prints the percentage of residual elements that are more then 10 percent of the maximum value.

   Collective on KSP

   Input Parameters:
+  ksp   - iterative context
.  it    - iteration number
.  rnorm - 2-norm (preconditioned) residual value (may be estimated).
-  dummy - an ASCII viewer

   Options Database Key:
.  -ksp_monitor_range - Activates KSPMonitorRange()

   Level: intermediate

.keywords: KSP, default, monitor, residual

.seealso: KSPMonitorSet(), KSPMonitorDefault(), KSPMonitorLGResidualNormCreate()
@*/
PetscErrorCode  KSPMonitorRange(KSP ksp,PetscInt it,PetscReal rnorm,PetscViewerAndFormat *dummy)
{
    PetscErrorCode   ierr;
    PetscReal        perc,rel;
    PetscViewer      viewer = dummy->viewer;
    /* should be in a MonitorRangeContext */
    static PetscReal prev;

    PetscFunctionBegin;
    PetscValidHeaderSpecific(viewer,PETSC_VIEWER_CLASSID,4);
    ierr = PetscViewerPushFormat(viewer,dummy->format);
    CHKERRQ(ierr);
    ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);
    CHKERRQ(ierr);
    if (!it) prev = rnorm;
    if (it == 0 && ((PetscObject)ksp)->prefix) {
        ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms for %s solve.\n",((PetscObject)ksp)->prefix);
        CHKERRQ(ierr);
    }
    ierr = KSPMonitorRange_Private(ksp,it,&perc);
    CHKERRQ(ierr);

    rel  = (prev - rnorm)/prev;
    prev = rnorm;
    ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP preconditioned resid norm %14.12e Percent values above 20 percent of maximum %5.2f relative decrease %5.2e ratio %5.2e \n",it,(double)rnorm,(double)(100.0*perc),(double)rel,(double)(rel/perc));
    CHKERRQ(ierr);
    ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);
    CHKERRQ(ierr);
    ierr = PetscViewerPopFormat(viewer);
    CHKERRQ(ierr);
    PetscFunctionReturn(0);
}
开发者ID:tom-klotz，项目名称:petsc，代码行数:52，代码来源:iterativ.c


示例2: norm

/*@C
   KSPMonitorTrueResidualMaxNorm - Prints the true residual max norm as well as the preconditioned
   residual norm at each iteration of an iterative solver.

   Collective on KSP

   Input Parameters:
+  ksp   - iterative context
.  n     - iteration number
.  rnorm - norm (preconditioned) residual value (may be estimated).
-  dummy - an ASCII viewer

   Options Database Key:
.  -ksp_monitor_max - Activates KSPMonitorTrueResidualMaxNorm()

   Notes:
   This could be implemented (better) with a flag in ksp.

   Level: intermediate

.keywords: KSP, default, monitor, residual

.seealso: KSPMonitorSet(), KSPMonitorDefault(), KSPMonitorLGResidualNormCreate(),KSPMonitorTrueResidualNorm()
@*/
PetscErrorCode  KSPMonitorTrueResidualMaxNorm(KSP ksp,PetscInt n,PetscReal rnorm,void *dummy)
{
  PetscErrorCode ierr;
  Vec            resid;
  PetscReal      truenorm,bnorm;
  PetscViewer    viewer = (PetscViewer)dummy;
  char           normtype[256];

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer,PETSC_VIEWER_CLASSID,4);
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  if (n == 0 && ((PetscObject)ksp)->prefix) {
    ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms (max) for %s solve.\n",((PetscObject)ksp)->prefix);CHKERRQ(ierr);
  }
  ierr = KSPBuildResidual(ksp,NULL,NULL,&resid);CHKERRQ(ierr);
  ierr = VecNorm(resid,NORM_INFINITY,&truenorm);CHKERRQ(ierr);
  ierr = VecDestroy(&resid);CHKERRQ(ierr);
  ierr = VecNorm(ksp->vec_rhs,NORM_INFINITY,&bnorm);CHKERRQ(ierr);
  ierr = PetscStrncpy(normtype,KSPNormTypes[ksp->normtype],sizeof(normtype));CHKERRQ(ierr);
  ierr = PetscStrtolower(normtype);CHKERRQ(ierr);
  /* ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP %s resid norm %14.12e true resid norm %14.12e ||r(i)||_inf/||b||_inf %14.12e\n",n,normtype,(double)rnorm,(double)truenorm,(double)(truenorm/bnorm));CHKERRQ(ierr); */
  ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP true resid max norm %14.12e ||r(i)||/||b|| %14.12e\n",n,(double)truenorm,(double)(truenorm/bnorm));CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:mchandra，项目名称:petsc，代码行数:49，代码来源:iterativ.c


示例3: value

/*@C
   KSPMonitorSNES - Print the residual norm of the nonlinear function at each iteration of the linear iterative solver.

   Collective on KSP

   Input Parameters:
+  ksp   - iterative context
.  n     - iteration number
.  rnorm - 2-norm (preconditioned) residual value (may be estimated).
-  dummy - unused monitor context

   Level: intermediate

.keywords: KSP, default, monitor, residual

.seealso: KSPMonitorSet(), KSPMonitorTrueResidualNorm(), KSPMonitorLGResidualNormCreate()
@*/
PetscErrorCode  KSPMonitorSNES(KSP ksp,PetscInt n,PetscReal rnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer;
  SNES           snes = (SNES) dummy;
  Vec            snes_solution,work1,work2;
  PetscReal      snorm;

  PetscFunctionBegin;
  ierr = SNESGetSolution(snes,&snes_solution);CHKERRQ(ierr);
  ierr = VecDuplicate(snes_solution,&work1);CHKERRQ(ierr);
  ierr = VecDuplicate(snes_solution,&work2);CHKERRQ(ierr);
  ierr = KSPBuildSolution(ksp,work1,NULL);CHKERRQ(ierr);
  ierr = VecAYPX(work1,-1.0,snes_solution);CHKERRQ(ierr);
  ierr = SNESComputeFunction(snes,work1,work2);CHKERRQ(ierr);
  ierr = VecNorm(work2,NORM_2,&snorm);CHKERRQ(ierr);
  ierr = VecDestroy(&work1);CHKERRQ(ierr);
  ierr = VecDestroy(&work2);CHKERRQ(ierr);

  ierr = PetscViewerASCIIGetStdout(PetscObjectComm((PetscObject)ksp),&viewer);CHKERRQ(ierr);
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  if (n == 0 && ((PetscObject)ksp)->prefix) {
    ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms for %s solve.\n",((PetscObject)ksp)->prefix);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES Residual norm %5.3e KSP Residual norm %5.3e \n",n,(double)snorm,(double)rnorm);CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:pombredanne，项目名称:petsc，代码行数:45，代码来源:snesut.c


示例4: SNESCreate

/*@
  PetscConvEstRateView - Displays the convergence rate to a viewer

   Collective on SNES

   Parameter:
+  snes - iterative context obtained from SNESCreate()
.  alpha - the convergence rate for each field
-  viewer - the viewer to display the reason

   Options Database Keys:
.  -snes_convergence_estimate - print the convergence rate

   Level: developer

.seealso: PetscConvEstGetRate()
@*/
PetscErrorCode PetscConvEstRateView(PetscConvEst ce, const PetscReal alpha[], PetscViewer viewer)
{
  PetscBool      isAscii;
  PetscErrorCode ierr;

  PetscFunctionBegin;
  ierr = PetscObjectTypeCompare((PetscObject) viewer, PETSCVIEWERASCII, &isAscii);CHKERRQ(ierr);
  if (isAscii) {
    DM       dm;
    PetscInt Nf, f;

    ierr = SNESGetDM(ce->snes, &dm);CHKERRQ(ierr);
    ierr = DMGetNumFields(dm, &Nf);CHKERRQ(ierr);
    ierr = PetscViewerASCIIAddTab(viewer, ((PetscObject) ce)->tablevel);CHKERRQ(ierr);
    ierr = PetscViewerASCIIPrintf(viewer, "L_2 convergence rate: ");CHKERRQ(ierr);
    if (Nf > 1) {ierr = PetscViewerASCIIPrintf(viewer, "[");CHKERRQ(ierr);}
    for (f = 0; f < Nf; ++f) {
      if (f > 0) {ierr = PetscViewerASCIIPrintf(viewer, ", ");CHKERRQ(ierr);}
      ierr = PetscViewerASCIIPrintf(viewer, "%#.2g", (double) alpha[f]);CHKERRQ(ierr);
    }
    if (Nf > 1) {ierr = PetscViewerASCIIPrintf(viewer, "]");CHKERRQ(ierr);}
    ierr = PetscViewerASCIIPrintf(viewer, "\n");CHKERRQ(ierr);
    ierr = PetscViewerASCIISubtractTab(viewer, ((PetscObject) ce)->tablevel);CHKERRQ(ierr);
  }
  PetscFunctionReturn(0);
}
开发者ID:petsc，项目名称:petsc，代码行数:43，代码来源:convest.c


示例5: value

/*@C
   KSPMonitorTrueResidualNorm - Prints the true residual norm as well as the preconditioned
   residual norm at each iteration of an iterative solver.

   Collective on KSP

   Input Parameters:
+  ksp   - iterative context
.  n     - iteration number
.  rnorm - 2-norm (preconditioned) residual value (may be estimated).
-  dummy - unused monitor context

   Options Database Key:
.  -ksp_monitor_true_residual - Activates KSPMonitorTrueResidualNorm()

   Notes:
   When using right preconditioning, these values are equivalent.

   Level: intermediate

.keywords: KSP, default, monitor, residual

.seealso: KSPMonitorSet(), KSPMonitorDefault(), KSPMonitorLGResidualNormCreate(),KSPMonitorTrueResidualMaxNorm()
@*/
PetscErrorCode  KSPMonitorTrueResidualNorm(KSP ksp,PetscInt n,PetscReal rnorm,void *dummy)
{
  PetscErrorCode ierr;
  Vec            resid;
  PetscReal      truenorm,bnorm;
  PetscViewer    viewer = (PetscViewer)dummy;
  char           normtype[256];

  PetscFunctionBegin;
  if (!viewer) {
    ierr = PetscViewerASCIIGetStdout(PetscObjectComm((PetscObject)ksp),&viewer);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  if (n == 0 && ((PetscObject)ksp)->prefix) {
    ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms for %s solve.\n",((PetscObject)ksp)->prefix);CHKERRQ(ierr);
  }
  ierr = KSPBuildResidual(ksp,NULL,NULL,&resid);CHKERRQ(ierr);
  ierr = VecNorm(resid,NORM_2,&truenorm);CHKERRQ(ierr);
  ierr = VecDestroy(&resid);CHKERRQ(ierr);
  ierr = VecNorm(ksp->vec_rhs,NORM_2,&bnorm);CHKERRQ(ierr);
  ierr = PetscStrncpy(normtype,KSPNormTypes[ksp->normtype],sizeof(normtype));CHKERRQ(ierr);
  ierr = PetscStrtolower(normtype);CHKERRQ(ierr);
  ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP %s resid norm %14.12e true resid norm %14.12e ||r(i)||/||b|| %14.12e\n",n,normtype,(double)rnorm,(double)truenorm,(double)(truenorm/bnorm));CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:ZJLi2013，项目名称:petsc，代码行数:50，代码来源:iterativ.c


示例6: KSPMonitorSingularValue

/*@C
    KSPMonitorSingularValue - Prints the two norm of the true residual and
    estimation of the extreme singular values of the preconditioned problem
    at each iteration.

    Logically Collective on KSP

    Input Parameters:
+   ksp - the iterative context
.   n  - the iteration
-   rnorm - the two norm of the residual

    Options Database Key:
.   -ksp_monitor_singular_value - Activates KSPMonitorSingularValue()

    Notes:
    The CG solver uses the Lanczos technique for eigenvalue computation,
    while GMRES uses the Arnoldi technique; other iterative methods do
    not currently compute singular values.

    Level: intermediate

.keywords: KSP, CG, default, monitor, extreme, singular values, Lanczos, Arnoldi

.seealso: KSPComputeExtremeSingularValues()
@*/
PetscErrorCode  KSPMonitorSingularValue(KSP ksp,PetscInt n,PetscReal rnorm,PetscViewerAndFormat *dummy)
{
    PetscReal      emin,emax,c;
    PetscErrorCode ierr;
    PetscViewer    viewer = dummy->viewer;

    PetscFunctionBegin;
    PetscValidHeaderSpecific(ksp,KSP_CLASSID,1);
    PetscValidHeaderSpecific(viewer,PETSC_VIEWER_CLASSID,4);
    ierr = PetscViewerPushFormat(viewer,dummy->format);
    CHKERRQ(ierr);
    ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);
    CHKERRQ(ierr);
    if (!ksp->calc_sings) {
        ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %14.12e \n",n,(double)rnorm);
        CHKERRQ(ierr);
    } else {
        ierr = KSPComputeExtremeSingularValues(ksp,&emax,&emin);
        CHKERRQ(ierr);
        c    = emax/emin;
        ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %14.12e %% max %14.12e min %14.12e max/min %14.12e\n",n,(double)rnorm,(double)emax,(double)emin,(double)c);
        CHKERRQ(ierr);
    }
    ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);
    CHKERRQ(ierr);
    ierr = PetscViewerPopFormat(viewer);
    CHKERRQ(ierr);
    PetscFunctionReturn(0);
}
开发者ID:tom-klotz，项目名称:petsc，代码行数:55，代码来源:iterativ.c


示例7: Default

/*
  Default (short) KSP Monitor, same as KSPMonitorDefault() except
  it prints fewer digits of the residual as the residual gets smaller.
  This is because the later digits are meaningless and are often
  different on different machines; by using this routine different
  machines will usually generate the same output.
*/
PetscErrorCode  KSPMonitorDefaultShort(KSP ksp,PetscInt its,PetscReal fnorm,PetscViewerAndFormat *dummy)
{
    PetscErrorCode ierr;
    PetscViewer    viewer = dummy->viewer;

    PetscFunctionBegin;
    PetscValidHeaderSpecific(viewer,PETSC_VIEWER_CLASSID,4);
    ierr = PetscViewerPushFormat(viewer,dummy->format);
    CHKERRQ(ierr);
    ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);
    CHKERRQ(ierr);
    if (its == 0 && ((PetscObject)ksp)->prefix) {
        ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms for %s solve.\n",((PetscObject)ksp)->prefix);
        CHKERRQ(ierr);
    }

    if (fnorm > 1.e-9) {
        ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %g \n",its,(double)fnorm);
        CHKERRQ(ierr);
    } else if (fnorm > 1.e-11) {
        ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %5.3e \n",its,(double)fnorm);
        CHKERRQ(ierr);
    } else {
        ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm < 1.e-11\n",its);
        CHKERRQ(ierr);
    }
    ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);
    CHKERRQ(ierr);
    ierr = PetscViewerPopFormat(viewer);
    CHKERRQ(ierr);
    PetscFunctionReturn(0);
}
开发者ID:tom-klotz，项目名称:petsc，代码行数:39，代码来源:iterativ.c


示例8: SNESQNApply_BadBroyden

PetscErrorCode SNESQNApply_BadBroyden(SNES snes,PetscInt it,Vec Y,Vec X,Vec Xold,Vec D,Vec Dold)
{
  PetscErrorCode ierr;
  SNES_QN        *qn = (SNES_QN*)snes->data;
  Vec            W   = snes->work[3];
  Vec            *U  = qn->U;
  Vec            *T  = qn->V;

  /* ksp thing for Jacobian scaling */
  PetscInt           h,k,j,i,lits;
  PetscInt           m = qn->m;
  PetscScalar        gdot,udot;
  PetscInt           l = m;

  PetscFunctionBegin;
  if (it < m) l = it;
  ierr = VecCopy(D,Y);CHKERRQ(ierr);
  if (l > 0) {
    k    = (it-1)%l;
    ierr = SNESLineSearchGetLambda(snes->linesearch,&qn->lambda[k]);CHKERRQ(ierr);
    ierr = VecCopy(Dold,U[k]);CHKERRQ(ierr);
    ierr = VecAXPY(U[k],-1.0,D);CHKERRQ(ierr);
    ierr = VecCopy(Xold,T[k]);CHKERRQ(ierr);
    ierr = VecAXPY(T[k],-1.0,X);CHKERRQ(ierr);
  }

  if (qn->scale_type == SNES_QN_SCALE_JACOBIAN) {
    ierr = KSPSolve(snes->ksp,Y,W);CHKERRQ(ierr);
    SNESCheckKSPSolve(snes);
    ierr              = KSPGetIterationNumber(snes->ksp,&lits);CHKERRQ(ierr);
    snes->linear_its += lits;
    ierr              = VecCopy(W,Y);CHKERRQ(ierr);
  } else {
    ierr = VecScale(Y,qn->scaling);CHKERRQ(ierr);
  }

  /* inward recursion starting at the first update and working forward */
  if (l > 0) {
    for (i = 0; i < l-1; i++) {
      j    = (it+i-l)%l;
      k    = (it+i-l+1)%l;
      h    = (it-1)%l;
      ierr = VecDotBegin(U[j],U[h],&gdot);CHKERRQ(ierr);
      ierr = VecDotBegin(U[j],U[j],&udot);CHKERRQ(ierr);
      ierr = VecDotEnd(U[j],U[h],&gdot);CHKERRQ(ierr);
      ierr = VecDotEnd(U[j],U[j],&udot);CHKERRQ(ierr);
      ierr = VecAXPY(Y,PetscRealPart(gdot)/PetscRealPart(udot),T[k]);CHKERRQ(ierr);
      ierr = VecAXPY(Y,-(1.-qn->lambda[k])*PetscRealPart(gdot)/PetscRealPart(udot),T[j]);CHKERRQ(ierr);
      if (qn->monitor) {
        ierr = PetscViewerASCIIAddTab(qn->monitor,((PetscObject)snes)->tablevel+2);CHKERRQ(ierr);
        ierr = PetscViewerASCIIPrintf(qn->monitor, "it: %d k: %d gdot: %14.12e\n", it, k, PetscRealPart(gdot));CHKERRQ(ierr);
        ierr = PetscViewerASCIISubtractTab(qn->monitor,((PetscObject)snes)->tablevel+2);CHKERRQ(ierr);
      }
    }
  }
  PetscFunctionReturn(0);
}
开发者ID:pombredanne，项目名称:petsc，代码行数:57，代码来源:qn.c


示例9: TSAdaptCheckStage

/*@
   TSAdaptCheckStage - checks whether to accept a stage, (e.g. reject and change time step size if nonlinear solve fails)

   Collective on TSAdapt

   Input Arguments:
+  adapt - adaptive controller context
.  ts - time stepper
.  t - Current simulation time
-  Y - Current solution vector

   Output Arguments:
.  accept - PETSC_TRUE to accept the stage, PETSC_FALSE to reject

   Level: developer

.seealso:
@*/
PetscErrorCode TSAdaptCheckStage(TSAdapt adapt,TS ts,PetscReal t,Vec Y,PetscBool *accept)
{
  PetscErrorCode      ierr;
  SNESConvergedReason snesreason = SNES_CONVERGED_ITERATING;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(adapt,TSADAPT_CLASSID,1);
  PetscValidHeaderSpecific(ts,TS_CLASSID,2);
  PetscValidIntPointer(accept,3);

  if (ts->snes) {ierr = SNESGetConvergedReason(ts->snes,&snesreason);CHKERRQ(ierr);}
  if (snesreason < 0) {
    *accept = PETSC_FALSE;
    if (++ts->num_snes_failures >= ts->max_snes_failures && ts->max_snes_failures > 0) {
      ts->reason = TS_DIVERGED_NONLINEAR_SOLVE;
      ierr = PetscInfo2(ts,"Step=%D, nonlinear solve failures %D greater than current TS allowed, stopping solve\n",ts->steps,ts->num_snes_failures);CHKERRQ(ierr);
      if (adapt->monitor) {
        ierr = PetscViewerASCIIAddTab(adapt->monitor,((PetscObject)adapt)->tablevel);CHKERRQ(ierr);
        ierr = PetscViewerASCIIPrintf(adapt->monitor,"    TSAdapt %s step %3D stage rejected t=%-11g+%10.3e, nonlinear solve failures %D greater than current TS allowed\n",((PetscObject)adapt)->type_name,ts->steps,(double)ts->ptime,(double)ts->time_step,ts->num_snes_failures);CHKERRQ(ierr);
        ierr = PetscViewerASCIISubtractTab(adapt->monitor,((PetscObject)adapt)->tablevel);CHKERRQ(ierr);
      }
    }
  } else {
    *accept = PETSC_TRUE;
    ierr = TSFunctionDomainError(ts,t,Y,accept);CHKERRQ(ierr);
    if(*accept && adapt->checkstage) {
      ierr = (*adapt->checkstage)(adapt,ts,t,Y,accept);CHKERRQ(ierr);
    }
  }

  if(!(*accept) && !ts->reason) {
    PetscReal dt,new_dt;
    ierr = TSGetTimeStep(ts,&dt);CHKERRQ(ierr);
    new_dt = dt * adapt->scale_solve_failed;
    ierr = TSSetTimeStep(ts,new_dt);CHKERRQ(ierr);
    adapt->timestepjustdecreased += adapt->timestepjustdecreased_delay;
    if (adapt->monitor) {
      ierr = PetscViewerASCIIAddTab(adapt->monitor,((PetscObject)adapt)->tablevel);CHKERRQ(ierr);
      ierr = PetscViewerASCIIPrintf(adapt->monitor,"    TSAdapt %s step %3D stage rejected (%s) t=%-11g+%10.3e retrying with dt=%-10.3e\n",((PetscObject)adapt)->type_name,ts->steps,SNESConvergedReasons[snesreason],(double)ts->ptime,(double)dt,(double)new_dt);CHKERRQ(ierr);
      ierr = PetscViewerASCIISubtractTab(adapt->monitor,((PetscObject)adapt)->tablevel);CHKERRQ(ierr);
    }
  }
  PetscFunctionReturn(0);
}
开发者ID:petsc，项目名称:petsc，代码行数:62，代码来源:tsadapt.c


示例10: solvers

/*@C
   SNESMonitorDefault - Monitors progress of the SNES solvers (default).

   Collective on SNES

   Input Parameters:
+  snes - the SNES context
.  its - iteration number
.  fgnorm - 2-norm of residual
-  dummy - unused context

   Notes:
   This routine prints the residual norm at each iteration.

   Level: intermediate

.keywords: SNES, nonlinear, default, monitor, norm

.seealso: SNESMonitorSet(), SNESMonitorSolution()
@*/
PetscErrorCode  SNESMonitorDefault(SNES snes,PetscInt its,PetscReal fgnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer = dummy ? (PetscViewer) dummy : PETSC_VIEWER_STDOUT_(((PetscObject)snes)->comm);

  PetscFunctionBegin;
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES Function norm %14.12e \n",its,(double)fgnorm);CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:erdc-cm，项目名称:petsc-dev，代码行数:31，代码来源:snesut.c


示例11: solvers

/*@C
   SNESMonitorDefault - Monitors progress of the SNES solvers (default).

   Collective on SNES

   Input Parameters:
+  snes - the SNES context
.  its - iteration number
.  fgnorm - 2-norm of residual
-  dummy - unused context

   Notes:
   This routine prints the residual norm at each iteration.

   Level: intermediate

.keywords: SNES, nonlinear, default, monitor, norm

.seealso: SNESMonitorSet(), SNESMonitorSolution()
@*/
PetscErrorCode  SNESMonitorDefault(SNES snes,PetscInt its,PetscReal fgnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer = (PetscViewer) dummy;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer,PETSC_VIEWER_CLASSID,4);
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES Function norm %14.12e \n",its,(double)fgnorm);CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:pombredanne，项目名称:petsc，代码行数:32，代码来源:snesut.c


示例12: TSAdaptCandidatesClear

/*@C
   TSAdaptChoose - choose which method and step size to use for the next step

   Collective on TSAdapt

   Input Arguments:
+  adapt - adaptive contoller
-  h - current step size

   Output Arguments:
+  next_sc - optional, scheme to use for the next step
.  next_h - step size to use for the next step
-  accept - PETSC_TRUE to accept the current step, PETSC_FALSE to repeat the current step with the new step size

   Note:
   The input value of parameter accept is retained from the last time step, so it will be PETSC_FALSE if the step is
   being retried after an initial rejection.

   Level: developer

.seealso: TSAdapt, TSAdaptCandidatesClear(), TSAdaptCandidateAdd()
@*/
PetscErrorCode TSAdaptChoose(TSAdapt adapt,TS ts,PetscReal h,PetscInt *next_sc,PetscReal *next_h,PetscBool *accept)
{
  PetscErrorCode ierr;
  PetscInt       ncandidates = adapt->candidates.n;
  PetscInt       scheme = 0;
  PetscReal      wlte = -1.0;
  PetscReal      wltea = -1.0;
  PetscReal      wlter = -1.0;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(adapt,TSADAPT_CLASSID,1);
  PetscValidHeaderSpecific(ts,TS_CLASSID,2);
  if (next_sc) PetscValidIntPointer(next_sc,4);
  PetscValidPointer(next_h,5);
  PetscValidIntPointer(accept,6);
  if (next_sc) *next_sc = 0;

  /* Do not mess with adaptivity while handling events*/
  if (ts->event && ts->event->status != TSEVENT_NONE) {
    *next_h = h;
    *accept = PETSC_TRUE;
    PetscFunctionReturn(0);
  }

  ierr = (*adapt->ops->choose)(adapt,ts,h,&scheme,next_h,accept,&wlte,&wltea,&wlter);CHKERRQ(ierr);
  if (scheme < 0 || (ncandidates > 0 && scheme >= ncandidates)) SETERRQ2(PetscObjectComm((PetscObject)adapt),PETSC_ERR_ARG_OUTOFRANGE,"Chosen scheme %D not in valid range 0..%D",scheme,ncandidates-1);
  if (*next_h < 0) SETERRQ1(PetscObjectComm((PetscObject)adapt),PETSC_ERR_ARG_OUTOFRANGE,"Computed step size %g must be positive",(double)*next_h);
  if (next_sc) *next_sc = scheme;

  if (*accept && ts->exact_final_time == TS_EXACTFINALTIME_MATCHSTEP) {
    /* Increase/reduce step size if end time of next step is close to or overshoots max time */
    PetscReal t = ts->ptime + ts->time_step, h = *next_h;
    PetscReal tend = t + h, tmax = ts->max_time, hmax = tmax - t;
    PetscReal a = (PetscReal)(1.0 + adapt->matchstepfac[0]);
    PetscReal b = adapt->matchstepfac[1];
    if (t < tmax && tend > tmax) *next_h = hmax;
    if (t < tmax && tend < tmax && h*b > hmax) *next_h = hmax/2;
    if (t < tmax && tend < tmax && h*a > hmax) *next_h = hmax;
  }

  if (adapt->monitor) {
    const char *sc_name = (scheme < ncandidates) ? adapt->candidates.name[scheme] : "";
    ierr = PetscViewerASCIIAddTab(adapt->monitor,((PetscObject)adapt)->tablevel);CHKERRQ(ierr);
    if (wlte < 0) {
      ierr = PetscViewerASCIIPrintf(adapt->monitor,"    TSAdapt %s %s %D:%s step %3D %s t=%-11g+%10.3e dt=%-10.3e\n",((PetscObject)adapt)->type_name,((PetscObject)ts)->type_name,scheme,sc_name,ts->steps,*accept ? "accepted" : "rejected",(double)ts->ptime,(double)h,(double)*next_h);CHKERRQ(ierr);
    } else {
      ierr = PetscViewerASCIIPrintf(adapt->monitor,"    TSAdapt %s %s %D:%s step %3D %s t=%-11g+%10.3e dt=%-10.3e wlte=%5.3g  wltea=%5.3g wlter=%5.3g\n",((PetscObject)adapt)->type_name,((PetscObject)ts)->type_name,scheme,sc_name,ts->steps,*accept ? "accepted" : "rejected",(double)ts->ptime,(double)h,(double)*next_h,(double)wlte,(double)wltea,(double)wlter);CHKERRQ(ierr);
    }
    ierr = PetscViewerASCIISubtractTab(adapt->monitor,((PetscObject)adapt)->tablevel);CHKERRQ(ierr);
  }
  PetscFunctionReturn(0);
}
开发者ID:petsc，项目名称:petsc，代码行数:74，代码来源:tsadapt.c


示例13: value

/*@C
   KSPMonitorDefault - Print the residual norm at each iteration of an
   iterative solver.

   Collective on KSP

   Input Parameters:
+  ksp   - iterative context
.  n     - iteration number
.  rnorm - 2-norm (preconditioned) residual value (may be estimated).
-  dummy - an ASCII PetscViewer

   Level: intermediate

.keywords: KSP, default, monitor, residual

.seealso: KSPMonitorSet(), KSPMonitorTrueResidualNorm(), KSPMonitorLGResidualNormCreate()
@*/
PetscErrorCode  KSPMonitorDefault(KSP ksp,PetscInt n,PetscReal rnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer = (PetscViewer) dummy;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer,PETSC_VIEWER_CLASSID,4);
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  if (n == 0 && ((PetscObject)ksp)->prefix) {
    ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms for %s solve.\n",((PetscObject)ksp)->prefix);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %14.12e \n",n,(double)rnorm);CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:mchandra，项目名称:petsc，代码行数:33，代码来源:iterativ.c


示例14: MonitorNorms

static PetscErrorCode  
MonitorNorms(SNES snes, PetscInt its, PetscReal fgnorm, void *dummy)
{
  PetscViewer    viewer = PETSC_VIEWER_STDOUT_WORLD;

  Vec dx;
  SNESGetSolutionUpdate(snes, &dx);
  PetscReal dxnorm;
  VecNorm(dx, NORM_2, &dxnorm);
  PetscInt tablevel;
  PetscObjectGetTabLevel(((PetscObject)snes), &tablevel);
  PetscViewerASCIIAddTab(viewer, tablevel);
  PetscViewerASCIIPrintf(viewer,"%3D SNES Function norm %14.12e, Solution residual norm %14.12e\n",
                         its, (double)fgnorm, (double)dxnorm);
  PetscViewerASCIISubtractTab(viewer, tablevel);
  return(0);
}
开发者ID:kglass，项目名称:GridPACK，代码行数:17，代码来源:petsc_nonlinear_solver_implementation.cpp


示例15: Default

/*
     Default (short) SNES Monitor, same as SNESMonitorDefault() except
  it prints fewer digits of the residual as the residual gets smaller.
  This is because the later digits are meaningless and are often
  different on different machines; by using this routine different
  machines will usually generate the same output.
*/
PetscErrorCode  SNESMonitorDefaultShort(SNES snes,PetscInt its,PetscReal fgnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer = dummy ? (PetscViewer) dummy : PETSC_VIEWER_STDOUT_(((PetscObject)snes)->comm);

  PetscFunctionBegin;
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  if (fgnorm > 1.e-9) {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES Function norm %G \n",its,fgnorm);CHKERRQ(ierr);
  } else if (fgnorm > 1.e-11){
    ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES Function norm %5.3e \n",its,fgnorm);CHKERRQ(ierr);
  } else {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES Function norm < 1.e-11\n",its);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:erdc-cm，项目名称:petsc-dev，代码行数:24，代码来源:snesut.c


示例16: value

/*@C
   KSPLSQRMonitorDefault - Print the residual norm at each iteration of the LSQR method and the norm of the residual of the normal equations A'*A x = A' b

   Collective on KSP

   Input Parameters:
+  ksp   - iterative context
.  n     - iteration number
.  rnorm - 2-norm (preconditioned) residual value (may be estimated).
-  dummy - unused monitor context

   Level: intermediate

.keywords: KSP, default, monitor, residual

.seealso: KSPMonitorSet(), KSPMonitorTrueResidualNorm(), KSPMonitorLGResidualNormCreate(), KSPMonitorDefault()
@*/
PetscErrorCode  KSPLSQRMonitorDefault(KSP ksp,PetscInt n,PetscReal rnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer = dummy ? (PetscViewer) dummy : PETSC_VIEWER_STDOUT_(PetscObjectComm((PetscObject)ksp));
  KSP_LSQR       *lsqr  = (KSP_LSQR*)ksp->data;

  PetscFunctionBegin;
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  if (((PetscObject)ksp)->prefix) {
    ierr = PetscViewerASCIIPrintf(viewer,"  Residual norm and norm of normal equations for %s solve.\n",((PetscObject)ksp)->prefix);CHKERRQ(ierr);
  }
  if (!n) {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %14.12e\n",n,rnorm);CHKERRQ(ierr);
  } else {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %14.12e Residual norm normal equations %14.12e\n",n,rnorm,lsqr->arnorm);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:feelpp，项目名称:debian-petsc，代码行数:36，代码来源:lsqr.c


示例17: value

/*@C
   SNESMonitorRange - Prints the percentage of residual elements that are more then 10 percent of the maximum value.

   Collective on SNES

   Input Parameters:
+  snes   - iterative context
.  it    - iteration number
.  rnorm - 2-norm (preconditioned) residual value (may be estimated).
-  dummy - unused monitor context

   Options Database Key:
.  -snes_monitor_range - Activates SNESMonitorRange()

   Level: intermediate

.keywords: SNES, default, monitor, residual

.seealso: SNESMonitorSet(), SNESMonitorDefault(), SNESMonitorLGCreate()
@*/
PetscErrorCode  SNESMonitorRange(SNES snes,PetscInt it,PetscReal rnorm,void *dummy)
{
  PetscErrorCode   ierr;
  PetscReal        perc,rel;
  PetscViewer      viewer = dummy ? (PetscViewer) dummy : PETSC_VIEWER_STDOUT_(((PetscObject)snes)->comm);
  /* should be in a MonitorRangeContext */
  static PetscReal prev;

  PetscFunctionBegin;
  if (!it) prev = rnorm;
  ierr = SNESMonitorRange_Private(snes,it,&perc);CHKERRQ(ierr);

  rel  = (prev - rnorm)/prev;
  prev = rnorm;
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  ierr = PetscViewerASCIIPrintf(viewer,"%3D SNES preconditioned resid norm %14.12e Percent values above 20 percent of maximum %5.2f relative decrease %5.2e ratio %5.2e \n",it,(double)rnorm,(double)100.0*perc,(double)rel,(double)rel/perc);CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:erdc-cm，项目名称:petsc-dev，代码行数:39，代码来源:snesut.c


示例18: residual

/*@C
   SNESMonitorRatio - Monitors progress of the SNES solvers by printing the ratio
   of residual norm at each iteration to the previous.

   Collective on SNES

   Input Parameters:
+  snes - the SNES context
.  its - iteration number
.  fgnorm - 2-norm of residual (or gradient)
-  dummy -  context of monitor

   Level: intermediate

.keywords: SNES, nonlinear, monitor, norm

.seealso: SNESMonitorSet(), SNESMonitorSolution()
@*/
PetscErrorCode  SNESMonitorRatio(SNES snes,PetscInt its,PetscReal fgnorm,void *dummy)
{
  PetscErrorCode          ierr;
  PetscInt                len;
  PetscReal               *history;
  SNESMonitorRatioContext *ctx = (SNESMonitorRatioContext*)dummy;

  PetscFunctionBegin;
  ierr = SNESGetConvergenceHistory(snes,&history,PETSC_NULL,&len);CHKERRQ(ierr);
  ierr = PetscViewerASCIIAddTab(ctx->viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  if (!its || !history || its > len) {
    ierr = PetscViewerASCIIPrintf(ctx->viewer,"%3D SNES Function norm %14.12e \n",its,(double)fgnorm);CHKERRQ(ierr);
  } else {
    PetscReal ratio = fgnorm/history[its-1];
    ierr = PetscViewerASCIIPrintf(ctx->viewer,"%3D SNES Function norm %14.12e %14.12e \n",its,(double)fgnorm,(double)ratio);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIISubtractTab(ctx->viewer,((PetscObject)snes)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:erdc-cm，项目名称:petsc-dev，代码行数:37，代码来源:snesut.c


示例19: TSPseudoMonitorDefault

PetscErrorCode TSPseudoMonitorDefault(TS ts,PetscInt step,PetscReal ptime,Vec v,void *dummy)
{
  TS_Pseudo      *pseudo = (TS_Pseudo*)ts->data;
  PetscErrorCode ierr;
  PetscViewer    viewer = (PetscViewer) dummy;

  PetscFunctionBegin;
  if (!viewer) {
    ierr = PetscViewerASCIIGetStdout(PetscObjectComm((PetscObject)ts),&viewer);CHKERRQ(ierr);
  }
  if (pseudo->fnorm < 0) {      /* The last computed norm is stale, recompute */
    ierr = VecZeroEntries(pseudo->xdot);CHKERRQ(ierr);
    ierr = TSComputeIFunction(ts,ts->ptime,ts->vec_sol,pseudo->xdot,pseudo->func,PETSC_FALSE);CHKERRQ(ierr);
    ierr = VecNorm(pseudo->func,NORM_2,&pseudo->fnorm);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ts)->tablevel);CHKERRQ(ierr);
  ierr = PetscViewerASCIIPrintf(viewer,"TS %D dt %g time %g fnorm %g\n",step,(double)ts->time_step,(double)ptime,(double)pseudo->fnorm);CHKERRQ(ierr);
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ts)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:00liujj，项目名称:petsc，代码行数:20，代码来源:posindep.c


示例20: Default

/*
  Default (short) KSP Monitor, same as KSPMonitorDefault() except
  it prints fewer digits of the residual as the residual gets smaller.
  This is because the later digits are meaningless and are often
  different on different machines; by using this routine different
  machines will usually generate the same output.
*/
PetscErrorCode  KSPMonitorDefaultShort(KSP ksp,PetscInt its,PetscReal fnorm,void *dummy)
{
  PetscErrorCode ierr;
  PetscViewer    viewer = (PetscViewer)dummy;

  PetscFunctionBegin;
  if (!viewer) {
    ierr = PetscViewerASCIIGetStdout(PetscObjectComm((PetscObject)ksp),&viewer);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIIAddTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  if (its == 0 && ((PetscObject)ksp)->prefix) {
    ierr = PetscViewerASCIIPrintf(viewer,"  Residual norms for %s solve.\n",((PetscObject)ksp)->prefix);CHKERRQ(ierr);
  }

  if (fnorm > 1.e-9) {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %G \n",its,fnorm);CHKERRQ(ierr);
  } else if (fnorm > 1.e-11) {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm %5.3e \n",its,(double)fnorm);CHKERRQ(ierr);
  } else {
    ierr = PetscViewerASCIIPrintf(viewer,"%3D KSP Residual norm < 1.e-11\n",its);CHKERRQ(ierr);
  }
  ierr = PetscViewerASCIISubtractTab(viewer,((PetscObject)ksp)->tablevel);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}
开发者ID:ZJLi2013，项目名称:petsc，代码行数:31，代码来源:iterativ.c



注：本文中的PetscViewerASCIIAddTab函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ PetscViewerASCIIOpen函数代码示例发布时间：2022-05-30
下一篇：
C++ PetscValidPointer函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap