• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ PathStrokeType函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中PathStrokeType函数的典型用法代码示例。如果您正苦于以下问题:C++ PathStrokeType函数的具体用法?C++ PathStrokeType怎么用?C++ PathStrokeType使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了PathStrokeType函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: trans

void OldSchoolLookAndFeel::drawTickBox (Graphics& g,
                                        Component& /*component*/,
                                        float x, float y, float w, float h,
                                        const bool ticked,
                                        const bool isEnabled,
                                        const bool /*isMouseOverButton*/,
                                        const bool isButtonDown)
{
    Path box;
    box.addRoundedRectangle (0.0f, 2.0f, 6.0f, 6.0f, 1.0f);

    g.setColour (isEnabled ? Colours::blue.withAlpha (isButtonDown ? 0.3f : 0.1f)
                           : Colours::lightgrey.withAlpha (0.1f));

    AffineTransform trans (AffineTransform::scale (w / 9.0f, h / 9.0f).translated (x, y));

    g.fillPath (box, trans);

    g.setColour (Colours::black.withAlpha (0.6f));
    g.strokePath (box, PathStrokeType (0.9f), trans);

    if (ticked)
    {
        Path tick;
        tick.startNewSubPath (1.5f, 3.0f);
        tick.lineTo (3.0f, 6.0f);
        tick.lineTo (6.0f, 0.0f);

        g.setColour (isEnabled ? Colours::black : Colours::grey);
        g.strokePath (tick, PathStrokeType (2.5f), trans);
    }
}
开发者ID:randi2kewl,项目名称:ShoutOut,代码行数:32,代码来源:juce_OldSchoolLookAndFeel.cpp


示例2: getWidth

void HoaMeterComponent::draw_leds(Graphics& g)
{
    int i;
    float j, dB;
    float angle_start, angle, angle_end, radius, center_x, center_y;
    float led_width = 0.49 * getWidth() / 18.;
    float h = led_width * 18.;
    float thickness  = led_width - 2;
    if(getWidth() < 125)
        thickness = led_width - 1;

    Path p;

    for(i = 0; i < m_meter->getNumberOfChannels(); i++)
    {
        angle   = -m_meter->getChannelAzimuthMapped(i);

        center_x    = Hoa::abscissa(m_radius - h, angle);
        center_y    = Hoa::ordinate(m_radius - h, angle);

        angle_start = angle - m_meter->getChannelWidth(i) * 0.5f;
        angle_end   = angle + m_meter->getChannelWidth(i) * 0.5f;


        for(j = 11, dB = -34.5; j > -1; j--, dB += 3.)
        {
            radius    = (j + 5.) * led_width;
            if(m_meter->getChannelEnergy(i) > dB)
            {
                if(j > 8)
                    g.setColour(Colours::green);
                else if(j > 5)
                    g.setColour(Colours::greenyellow);
                else if(j > 2)
                    g.setColour(Colours::yellow);
                else
                    g.setColour(Colours::orange);

                p.addCentredArc(center_x + m_center, center_y + m_center, radius, radius, HOA_2PI, angle_start, angle_end, 1);
                g.strokePath(p, PathStrokeType(thickness, PathStrokeType::beveled, PathStrokeType::butt));
                p.clear();
            }
            else if(j != -1)
            {
                g.setColour(Colours::grey);
                p.addCentredArc(center_x + m_center, center_y + m_center, radius, radius, HOA_2PI, angle_start, angle_end, 1);
                g.strokePath(p, PathStrokeType(thickness, PathStrokeType::beveled, PathStrokeType::butt));
                p.clear();
            }
        }
    }
};
开发者ID:avilleret,项目名称:HoaLibrary,代码行数:52,代码来源:HoaMeterComponent.cpp


示例3: baseColour

void IntrojucerLookAndFeel::drawButtonBackground (Graphics& g,
                                                  Button& button,
                                                  const Colour& backgroundColour,
                                                  bool isMouseOverButton,
                                                  bool isButtonDown)
{
    const bool flatOnLeft   = button.isConnectedOnLeft();
    const bool flatOnRight  = button.isConnectedOnRight();
    const bool flatOnTop    = button.isConnectedOnTop();
    const bool flatOnBottom = button.isConnectedOnBottom();

    const float width  = (float) button.getWidth();
    const float height = (float) button.getHeight();

    const float x = 0.5f;
    const float y = 0.5f;
    const float w = width  - 1.0f;
    const float h = height - 1.0f;
    const float cornerSize = 4.0f;

    Colour baseColour (backgroundColour.withMultipliedSaturation (button.hasKeyboardFocus (true)
                                                                      ? 1.3f : 0.9f)
                                       .withMultipliedAlpha (button.isEnabled() ? 0.9f : 0.5f));

    if (isButtonDown)           baseColour = baseColour.contrasting (0.2f);
    else if (isMouseOverButton) baseColour = baseColour.contrasting (0.1f);

    const float mainBrightness = baseColour.getBrightness();
    const float mainAlpha = baseColour.getFloatAlpha();

    Path outline;
    outline.addRoundedRectangle (x, y, w, h, cornerSize, cornerSize,
                                 ! (flatOnLeft  || flatOnTop),
                                 ! (flatOnRight || flatOnTop),
                                 ! (flatOnLeft  || flatOnBottom),
                                 ! (flatOnRight || flatOnBottom));

    g.setGradientFill (ColourGradient (baseColour.brighter (0.2f), 0.0f, 0.0f,
                                       baseColour.darker (0.25f), 0.0f, height, false));
    g.fillPath (outline);

    g.setColour (Colours::white.withAlpha (0.4f * mainAlpha * mainBrightness * mainBrightness));
    g.strokePath (outline, PathStrokeType (1.0f), AffineTransform::translation (0.0f, 1.0f)
                                                        .scaled (1.0f, (h - 1.6f) / h));

    g.setColour (Colours::black.withAlpha (0.4f * mainAlpha));
    g.strokePath (outline, PathStrokeType (1.0f));
}
开发者ID:lauyoume,项目名称:JUCE,代码行数:48,代码来源:jucer_AppearanceSettings.cpp


示例4: drawTrail

    void drawTrail (Trail& trail, Graphics& g)
    {
        g.setColour (trail.colour);
        g.strokePath (trail.path, PathStrokeType (20.0f, PathStrokeType::curved, PathStrokeType::rounded));

        const float radius = 40.0f;

        g.setColour (Colours::black);
        g.drawEllipse (trail.currentPosition.x - radius,
                       trail.currentPosition.y - radius,
                       radius * 2.0f, radius * 2.0f, 2.0f);

        g.setFont (14.0f);

        String desc ("Mouse #");
        desc << trail.source.getIndex();

        if (trail.modifierKeys.isCommandDown()) desc << " (CMD)";
        if (trail.modifierKeys.isShiftDown())   desc << " (SHIFT)";
        if (trail.modifierKeys.isCtrlDown())    desc << " (CTRL)";
        if (trail.modifierKeys.isAltDown())     desc << " (ALT)";

        g.drawText (desc,
                    Rectangle<int> ((int) trail.currentPosition.x - 200,
                                    (int) trail.currentPosition.y - 60,
                                    400, 20),
                    Justification::centredTop, false);
    }
开发者ID:AmirooR,项目名称:JUCE,代码行数:28,代码来源:MultiTouch.cpp


示例5: PathStrokeType

void DistortionComponent::paint (Graphics& g)
{
    g.drawImageAt (background, 0, 0);
    
    g.setColour (Colours::white);
    g.strokePath (path, PathStrokeType (2.0f));
}
开发者ID:Salimlou,项目名称:drowaudio,代码行数:7,代码来源:DistortionComponent.cpp


示例6: paint

    void paint (Graphics& g) override
    {
        // (Our component is opaque, so we must completely fill the background with a solid colour)
        g.fillAll (Colours::black);

        g.setColour (Colours::white);
        const int fishLength = 15;

        Path spinePath;

        for (int i = 0; i < fishLength; ++i)
        {
            const float radius = 100 + 10 * std::sin (getFrameCounter() * 0.1f + i * 0.5f);

            Point<float> p (getWidth()  / 2.0f + 1.5f * radius * std::sin (getFrameCounter() * 0.02f + i * 0.12f),
                            getHeight() / 2.0f + 1.0f * radius * std::cos (getFrameCounter() * 0.04f + i * 0.12f));

            // draw the circles along the fish
            g.fillEllipse (p.x - i, p.y - i, 2.0f + 2.0f * i, 2.0f + 2.0f * i);

            if (i == 0)
                spinePath.startNewSubPath (p);  // if this is the first point, start a new path..
            else
                spinePath.lineTo (p);           // ...otherwise add the next point
        }

        // draw an outline around the path that we have created
        g.strokePath (spinePath, PathStrokeType (4.0f));
    }
开发者ID:0x4d52,项目名称:JUCE,代码行数:29,代码来源:MainComponent.cpp


示例7: drawGlassLozenge

void NonShinyLookAndFeel::drawTickBox (Graphics& g,
                               Component& component,
                               float x, float y, float w, float h,
                               const bool ticked,
                               const bool isEnabled,
                               const bool isMouseOverButton,
                               const bool isButtonDown)
{
    const float boxSize = w * 0.8f;

    drawGlassLozenge (g,x,y+(h-boxSize)*0.5f,boxSize,boxSize,
					  createBaseColour (component.findColour (TextButton::buttonColourId)
                                                 .withMultipliedAlpha (isEnabled ? 1.0f : 0.5f),
									    true,
                                        isMouseOverButton,
                                        isButtonDown),
					  isEnabled ? ((isButtonDown || isMouseOverButton) ? 1.2f : 0.7f) : 0.4f,
					  -1.0f,true,true,true,true);

    if (ticked)
    {
        Path tick;
        tick.startNewSubPath (2.0f, 3.0f);
        tick.lineTo (3.5f, 6.0f);
        tick.lineTo (6.5f, 0.0f);

        g.setColour (isEnabled ? Colours::black : Colours::grey);

        const AffineTransform trans (AffineTransform::scale (w / 9.0f, h / 9.0f)
                                         .translated (x, y));

        g.strokePath (tick, PathStrokeType (2.5f), trans);
    }
}
开发者ID:Amcut,项目名称:pizmidi,代码行数:34,代码来源:LookAndFeel.cpp


示例8: drawRotarySlider

    void drawRotarySlider (Graphics& g, int x, int y, int width, int height, float sliderPos,
                           float rotaryStartAngle, float rotaryEndAngle, Slider& slider) override
    {
        const float radius = jmin (width / 2, height / 2) - 2.0f;
        const float centreX = x + width * 0.5f;
        const float centreY = y + height * 0.5f;
        const float rx = centreX - radius;
        const float ry = centreY - radius;
        const float rw = radius * 2.0f;
        const float angle = rotaryStartAngle + sliderPos * (rotaryEndAngle - rotaryStartAngle);
        const bool isMouseOver = slider.isMouseOverOrDragging() && slider.isEnabled();

        if (slider.isEnabled())
            g.setColour (slider.findColour (Slider::rotarySliderFillColourId).withAlpha (isMouseOver ? 1.0f : 0.7f));
        else
            g.setColour (Colour (0x80808080));

        {
            Path filledArc;
            filledArc.addPieSegment (rx, ry, rw, rw, rotaryStartAngle, angle, 0.0);
            g.fillPath (filledArc);
        }

        {
            const float lineThickness = jmin (15.0f, jmin (width, height) * 0.45f) * 0.1f;
            Path outlineArc;
            outlineArc.addPieSegment (rx, ry, rw, rw, rotaryStartAngle, rotaryEndAngle, 0.0);
            g.strokePath (outlineArc, PathStrokeType (lineThickness));
        }
    }
开发者ID:Neknail,项目名称:JUCE,代码行数:30,代码来源:LookAndFeelDemo.cpp


示例9: jmin

void MyLookAndFeel::drawRotarySlider(Graphics& g,
                                     int x, int y,
                                     int width, int height,
                                     float sliderPos,
                                     const float rotaryStartAngle,
                                     const float rotaryEndAngle,
                                     Slider& /*slider*/)
{
    const float radius = jmin (width / 2, height / 2) - 2.0f;
    const float centreX = x + width * 0.5f;
    const float centreY = y + height * 0.5f;
    const float rx = centreX - radius;
    const float ry = centreY - radius;
    const float rw = radius * 2.0f;
    const float angle = rotaryStartAngle + sliderPos * (rotaryEndAngle - rotaryStartAngle);

    //const bool isMouseOver = slider.isMouseOverOrDragging() && slider.isEnabled();
    //const float zeroPos = rotaryStartAngle + std::abs((float)slider.getMinimum() / ((float)slider.getMaximum() - (float)slider.getMinimum())) * (rotaryEndAngle - rotaryStartAngle);

    Path p;

    PathStrokeType (rw * 0.01f).createStrokedPath (p, p);

    p.addLineSegment (Line<float>(0.0f, -radius * 0.5f, 0.00f, -radius), rw * 0.08f);

    g.setColour (Colours::white.withAlpha (1.0f));

    g.fillPath (p, AffineTransform::rotation (angle).translated (centreX, centreY));

    g.setColour (Colours::black.withAlpha (0.7f));
    g.drawEllipse (rx, ry, rw, rw, 1.0f);
}
开发者ID:jrigg,项目名称:DISTRHO-Ports,代码行数:32,代码来源:MyLookAndFeel.cpp


示例10: getWidth

void FilterResponseDisplay::paint(Graphics& g)
{
    float width = (float) getWidth();
    float height = (float) getHeight();
    
    g.setColour(displayBackgroundColor);
    g.fillRect(0.0, 0.0, width, height);
    
    magnitudeResponsePath.clear();
    
    int filterType = filterToUse->getFilterType();
    switch (filterType) {
        case AudioFilter::filterTypeList::LowPass:
            drawLowpass();
            break;
        case AudioFilter::filterTypeList::HighPass:
            drawHighpass();
            break;
    }

    //Close the response path drawn
    magnitudeResponsePath.closeSubPath();
    
    g.setColour(magResponseColour);
    g.strokePath(magnitudeResponsePath, PathStrokeType(filterPathThickness));
    
    /*
       Fill area under/inside path with same colour at a lower alpha / highlight value.
       Try setting magResponseColour.withAlpha value to different values to get a fill shade you like.
     */
    g.setColour(magResponseColour.withAlpha((uint8) 0x9a));
    g.fillPath(magnitudeResponsePath);
    
}
开发者ID:JoshMarler,项目名称:filter-gui-demo,代码行数:34,代码来源:FilterResponseDisplay.cpp


示例11: getWidth

void ShapeButton::paintButton (Graphics& g, bool isMouseOverButton, bool isButtonDown)
{
    if (! isEnabled())
    {
        isMouseOverButton = false;
        isButtonDown = false;
    }

    g.setColour ((isButtonDown) ? downColour
                                : (isMouseOverButton) ? overColour
                                                      : normalColour);

    int w = getWidth();
    int h = getHeight();

    if (getComponentEffect() != nullptr)
    {
        w -= 4;
        h -= 4;
    }

    const float offset = (outlineWidth * 0.5f) + (isButtonDown ? 1.5f : 0.0f);

    const AffineTransform trans (shape.getTransformToScaleToFit (offset, offset,
                                                                 w - offset - outlineWidth,
                                                                 h - offset - outlineWidth,
                                                                 maintainShapeProportions));
    g.fillPath (shape, trans);

    if (outlineWidth > 0.0f)
    {
        g.setColour (outlineColour);
        g.strokePath (shape, PathStrokeType (outlineWidth), trans);
    }
}
开发者ID:pingdynasty,项目名称:BlipZones,代码行数:35,代码来源:juce_ShapeButton.cpp


示例12: PathStrokeType

//==============================================================================
void DrumSynthEnvelope::paint (Graphics& g)
{
    const int dotSize = MAX_ENVELOPE_DOT_SIZE;
    const int halfDotSize = dotSize / 2;

    g.fillAll (Colour (0x47ffffff));

    Path myPath;
    myPath.startNewSubPath (0, points[0][1]);
    for (int i = 1; i < MAX_ENVELOPE_POINTS; i++)
        myPath.lineTo (points[i][0], points[i][1]);

    g.setColour (Colours::white);
    g.strokePath (myPath, PathStrokeType (2.0f));

    g.setColour (Colours::black);
    for (int i = 0; i < MAX_ENVELOPE_POINTS; i++)
    {
        int x = (int) (points[i][0]);
        int y = (int) (points[i][1]);
        
        g.setColour (Colours::white);
        g.fillEllipse (x - halfDotSize, y - halfDotSize, dotSize, dotSize);
        
        if (draggingPoint == i) {
            g.setColour (Colours::red);
            g.drawEllipse (x - halfDotSize, y - halfDotSize, dotSize, dotSize, 2);
        } else {
            g.setColour (Colours::black);
            g.drawEllipse (x - halfDotSize, y - halfDotSize, dotSize, dotSize, 1);
        }
开发者ID:alessandropetrolati,项目名称:juced,代码行数:32,代码来源:DrumSynthEnvelope.cpp


示例13: paint

    //==============================================================================
    void paint (Graphics& g) override
    {
        // (Our component is opaque, so we must completely fill the background with a solid colour)
        g.fillAll (Colours::black);

        const float centreY = getHeight() / 2.0f;
        const float radius = amplitude * 200.0f;

        // Draw an ellipse based on the mouse position and audio volume
        g.setColour (Colours::lightgreen);
        g.fillEllipse  (lastMousePosition.x - radius / 2.0f,
                        lastMousePosition.y - radius / 2.0f,
                        radius, radius);

        // Draw a representative sine wave.
        Path wavePath;
        wavePath.startNewSubPath (0, centreY);

        for (float x = 1.0f; x < getWidth(); ++x)
            wavePath.lineTo (x, centreY + amplitude * getHeight() * 2.0f
                                            * std::sin (x * frequency * 0.0001f));

        g.setColour (Colours::grey);
        g.strokePath (wavePath, PathStrokeType (2.0f));
    }
开发者ID:soundradix,项目名称:JUCE,代码行数:26,代码来源:MainComponent.cpp


示例14: isMouseOverOrDragging

//==============================================================================
void GraphLinkComponent::paint (Graphics& g)
{
    Colour wireColour = Colours::black;
    if ((to != 0 && from != 0))
    {
        GraphNodeComponent* node = to->getParentGraphComponent ();
        wireColour = node->getConnectorColour (to, isMouseOverOrDragging());
    }
    else
    {
        if (to)
        {
            GraphNodeComponent* node = to->getParentGraphComponent ();
            wireColour = node->getConnectorColour (to, true);
        }
        else if (from)
        {
            GraphNodeComponent* node = from->getParentGraphComponent ();
            wireColour = node->getConnectorColour (from, true);
        }
    }

    g.setColour (wireColour);
    g.strokePath (path, PathStrokeType (lineThickness));
开发者ID:alessandropetrolati,项目名称:juced,代码行数:25,代码来源:jucetice_GraphLinkComponent.cpp


示例15: thumbCol

void IntrojucerLookAndFeel::drawScrollbar (Graphics& g, ScrollBar& scrollbar, int x, int y, int width, int height,
                                           bool isScrollbarVertical, int thumbStartPosition, int thumbSize,
                                           bool isMouseOver, bool isMouseDown)
{
    Path thumbPath;

    if (thumbSize > 0)
    {
        const float thumbIndent = (isScrollbarVertical ? width : height) * 0.25f;
        const float thumbIndentx2 = thumbIndent * 2.0f;

        if (isScrollbarVertical)
            thumbPath.addRoundedRectangle (x + thumbIndent, thumbStartPosition + thumbIndent,
                                           width - thumbIndentx2, thumbSize - thumbIndentx2, (width - thumbIndentx2) * 0.5f);
        else
            thumbPath.addRoundedRectangle (thumbStartPosition + thumbIndent, y + thumbIndent,
                                           thumbSize - thumbIndentx2, height - thumbIndentx2, (height - thumbIndentx2) * 0.5f);
    }

    Colour thumbCol (scrollbar.findColour (ScrollBar::thumbColourId, true));

    if (isMouseOver || isMouseDown)
        thumbCol = thumbCol.withMultipliedAlpha (2.0f);

    g.setColour (thumbCol);
    g.fillPath (thumbPath);

    g.setColour (thumbCol.contrasting ((isMouseOver  || isMouseDown) ? 0.2f : 0.1f));
    g.strokePath (thumbPath, PathStrokeType (1.0f));
}
开发者ID:lauyoume,项目名称:JUCE,代码行数:30,代码来源:jucer_AppearanceSettings.cpp


示例16: PathStrokeType

//==============================================================================
void StereoSourceSeparationAudioProcessorEditor::paint (Graphics& g)
{
    g.fillAll(Colours::darkgrey);
    g.setColour (paintColour);
    g.fillPath (internalPath);
    g.strokePath (internalPath, PathStrokeType (1.200f));
    g.setColour(Colour (0xff3b3b3b));
    g.fillPath (arrowPath);
    g.strokePath (arrowPath, PathStrokeType (1.200f));
    g.setColour (Colours::wheat);
    g.drawEllipse(50+5, 100+5, width_-10, 2*height_-10, 8);
    g.setColour(Colours::lightgrey);
    g.drawLine(600, 90, 600, 190);
    g.setColour(Colours::darkgrey);
    g.fillRect(0, 100+height_, getWidth(), getHeight()-height_-100);
}
开发者ID:jrigg,项目名称:DISTRHO-Ports,代码行数:17,代码来源:PluginEditor.cpp


示例17: getHeight

void ControlPanelButton::paint(Graphics& g)
{
    //g.fillAll(Colour(58,58,58));

    g.setColour(Colours::white);

    Path p;

    float h = getHeight();
    float w = getWidth();

    if (open)
    {
        p.addTriangle(0.5f*w, 0.8f*h,
                      0.2f*w, 0.2f*h,
                      0.8f*w, 0.2f*h);
    }
    else
    {
        p.addTriangle(0.8f*w, 0.8f*h,
                      0.2f*w, 0.5f*h,
                      0.8f*w, 0.2f*h);
    }

    PathStrokeType pst = PathStrokeType(1.0f, PathStrokeType::curved, PathStrokeType::rounded);

    g.strokePath(p, pst);

}
开发者ID:andrelockmann,项目名称:GUI,代码行数:29,代码来源:ControlPanel.cpp


示例18: PathStrokeType

void ProjucerLookAndFeel::drawCallOutBoxBackground (CallOutBox&, Graphics& g, const Path& path, Image&)
{
    g.setColour (findColour (secondaryBackgroundColourId));
    g.fillPath (path);

    g.setColour (findColour (userButtonBackgroundColourId));
    g.strokePath (path, PathStrokeType (2.0f));
}
开发者ID:azeteg,项目名称:HISE,代码行数:8,代码来源:jucer_ProjucerLookAndFeel.cpp


示例19: jmin

//==============================================================================
void DrawablePad::drawButtonBackground (Graphics& g,
                                        Button& button,
                                        const Colour& backgroundColour,
                                        bool isMouseOverButton,
                                        bool isButtonDown)
{
    const int width = button.getWidth();
    const int height = button.getHeight();

    const float indent = 2.0f;
    const int cornerSize = jmin (roundFloatToInt (width * roundness),
                                 roundFloatToInt (height * roundness));

    Colour bc (backgroundColour);
    if (isMouseOverButton)
    {
        if (isButtonDown)
            bc = bc.brighter();
        else if (bc.getBrightness() > 0.5f)
            bc = bc.darker (0.1f);
        else
            bc = bc.brighter (0.1f);
    }

    g.setColour (bc);

    if (hex)
    {
        g.fillPath (hexpath);

        g.setColour (bc.contrasting().withAlpha ((isMouseOverButton) ? 0.6f : 0.4f));
        g.strokePath (hexpath, PathStrokeType ((isMouseOverButton) ? 2.0f : 1.4f));
    }
    else
    {
        Path p;
        p.addRoundedRectangle (indent, indent,
                               width - indent * 2.0f,
                               height - indent * 2.0f,
                               (float) cornerSize);
        g.fillPath (p);

        g.setColour (bc.contrasting().withAlpha ((isMouseOverButton) ? 0.6f : 0.4f));
        g.strokePath (p, PathStrokeType ((isMouseOverButton) ? 2.0f : 1.4f));
    }
}
开发者ID:alessandropetrolati,项目名称:juced,代码行数:47,代码来源:jucetice_DrawablePad.cpp


示例20: createPath

void Box2DRenderer::DrawPolygon (const b2Vec2* vertices, int32 vertexCount, const b2Color& color)
{
    graphics->setColour (getColour (color));

    Path p;
    createPath (p, vertices, vertexCount);
    graphics->strokePath (p, PathStrokeType (getLineThickness()));
}
开发者ID:0x4d52,项目名称:JUCE,代码行数:8,代码来源:juce_Box2DRenderer.cpp



注:本文中的PathStrokeType函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ PathType函数代码示例发布时间:2022-05-30
下一篇:
C++ PathRemoveFileSpec函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap