本文整理汇总了C++中PUTCHAR函数的典型用法代码示例。如果您正苦于以下问题：C++ PUTCHAR函数的具体用法？C++ PUTCHAR怎么用？C++ PUTCHAR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了PUTCHAR函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ChapSendResponse
/* ARGSUSED */
static void
ChapSendResponse(
chap_state *cstate)
{
u_char *outp;
int outlen, md_len, name_len;
md_len = cstate->resp_length;
name_len = strlen(cstate->resp_name);
outlen = CHAP_HEADERLEN + sizeof (u_char) + md_len + name_len;
outp = outpacket_buf;
MAKEHEADER(outp, PPP_CHAP);
PUTCHAR(CHAP_RESPONSE, outp); /* we are a response */
PUTCHAR(cstate->resp_id, outp); /* copy id from challenge packet */
PUTSHORT(outlen, outp); /* packet length */
PUTCHAR(md_len, outp); /* length of MD */
BCOPY(cstate->response, outp, md_len); /* copy MD to buffer */
INCPTR(md_len, outp);
BCOPY(cstate->resp_name, outp, name_len); /* append our name */
/* send the packet */
output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
cstate->clientstate = CHAPCS_RESPONSE;
TIMEOUT(ChapResponseTimeout, cstate, cstate->timeouttime);
++cstate->resp_transmits;
}
开发者ID:AoLaD，项目名称:rtems，代码行数:32，代码来源:chap.c
示例2: upap_sauthreq
/*
* upap_sauthreq - Send an Authenticate-Request.
*/
static void
upap_sauthreq(upap_state *u)
{
u_char *outp;
int outlen;
outlen = UPAP_HEADERLEN + 2 * sizeof (u_char)
+ u->us_userlen + u->us_passwdlen;
outp = outpacket_buf[u->us_unit];
MAKEHEADER(outp, PPP_PAP);
PUTCHAR(UPAP_AUTHREQ, outp);
PUTCHAR(++u->us_id, outp);
PUTSHORT(outlen, outp);
PUTCHAR(u->us_userlen, outp);
BCOPY(u->us_user, outp, u->us_userlen);
INCPTR(u->us_userlen, outp);
PUTCHAR(u->us_passwdlen, outp);
BCOPY(u->us_passwd, outp, u->us_passwdlen);
pppWrite(u->us_unit, outpacket_buf[u->us_unit], outlen + PPP_HDRLEN);
UPAPDEBUG((LOG_INFO, "pap_sauth: Sent id %d\n", u->us_id));
TIMEOUT(upap_timeout, u, u->us_timeouttime);
++u->us_transmits;
u->us_clientstate = UPAPCS_AUTHREQ;
}
开发者ID:krzint，项目名称:Szyfrator_NET，代码行数:32，代码来源:pap.c
示例3: upap_sresp
/*
* upap_sresp - Send a response (ack or nak).
*/
static void upap_sresp(ppp_pcb *pcb, u_char code, u_char id, const char *msg, int msglen) {
struct pbuf *p;
u_char *outp;
int outlen;
outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen;
p = pbuf_alloc(PBUF_RAW, (u16_t)(PPP_HDRLEN +outlen), PPP_CTRL_PBUF_TYPE);
if(NULL == p)
return;
if(p->tot_len != p->len) {
pbuf_free(p);
return;
}
outp = (u_char*)p->payload;
MAKEHEADER(outp, PPP_PAP);
PUTCHAR(code, outp);
PUTCHAR(id, outp);
PUTSHORT(outlen, outp);
PUTCHAR(msglen, outp);
MEMCPY(outp, msg, msglen);
ppp_write(pcb, p);
}
开发者ID:crvv，项目名称:lwip，代码行数:28，代码来源:upap.c
示例4: ChapSendStatus
/*
* ChapSendStatus - Send a status response (ack or nak).
*/
static void
ChapSendStatus(
chap_state *cstate,
int code)
{
u_char *outp;
int outlen, msglen;
char msg[256];
if (code == CHAP_SUCCESS)
slprintf(msg, sizeof(msg), "Welcome to %s.", hostname);
else
slprintf(msg, sizeof(msg), "I don't like you. Go 'way.");
msglen = strlen(msg);
outlen = CHAP_HEADERLEN + msglen;
outp = outpacket_buf;
MAKEHEADER(outp, PPP_CHAP); /* paste in a header */
PUTCHAR(code, outp);
PUTCHAR(cstate->chal_id, outp);
PUTSHORT(outlen, outp);
BCOPY(msg, outp, msglen);
output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
}
开发者ID:AoLaD，项目名称:rtems，代码行数:29，代码来源:chap.c
示例5: upap_sauthreq
/*
* upap_sauthreq - Send an Authenticate-Request.
*/
static void upap_sauthreq(ppp_pcb *pcb) {
struct pbuf *p;
u_char *outp;
int outlen;
outlen = UPAP_HEADERLEN + 2 * sizeof (u_char) +
pcb->upap.us_userlen + pcb->upap.us_passwdlen;
p = pbuf_alloc(PBUF_RAW, (u16_t)(PPP_HDRLEN +outlen), PPP_CTRL_PBUF_TYPE);
if(NULL == p)
return;
if(p->tot_len != p->len) {
pbuf_free(p);
return;
}
outp = (u_char*)p->payload;
MAKEHEADER(outp, PPP_PAP);
PUTCHAR(UPAP_AUTHREQ, outp);
PUTCHAR(++pcb->upap.us_id, outp);
PUTSHORT(outlen, outp);
PUTCHAR(pcb->upap.us_userlen, outp);
MEMCPY(outp, pcb->upap.us_user, pcb->upap.us_userlen);
INCPTR(pcb->upap.us_userlen, outp);
PUTCHAR(pcb->upap.us_passwdlen, outp);
MEMCPY(outp, pcb->upap.us_passwd, pcb->upap.us_passwdlen);
ppp_write(pcb, p);
TIMEOUT(upap_timeout, pcb, pcb->settings.pap_timeout_time);
++pcb->upap.us_transmits;
pcb->upap.us_clientstate = UPAPCS_AUTHREQ;
}
开发者ID:crvv，项目名称:lwip，代码行数:36，代码来源:upap.c
示例6: set_rime_addr
/*---------------------------------------------------------------------------*/
static void
set_rime_addr(void)
{
uint8_t *addr_long = NULL;
uint16_t addr_short = 0;
char i;
__xdata unsigned char * macp = &X_IEEE_ADDR;
PUTSTRING("Rime is 0x");
PUTHEX(sizeof(rimeaddr_t));
PUTSTRING(" bytes long\n");
PUTSTRING("Reading MAC from Info Page\n");
for(i = (RIMEADDR_SIZE - 1); i >= 0; --i) {
rimeaddr_node_addr.u8[i] = *macp;
macp++;
}
/* Now the address is stored MSB first */
#if STARTUP_VERBOSE
PUTSTRING("Rime configured with address ");
for(i = 0; i < RIMEADDR_SIZE - 1; i++) {
PUTHEX(rimeaddr_node_addr.u8[i]);
PUTCHAR(':');
}
PUTHEX(rimeaddr_node_addr.u8[i]);
PUTCHAR('\n');
#endif
cc2530_rf_set_addr(IEEE802154_PANID);
}
开发者ID:GDanii，项目名称:contiki-mirror-MICAz-IPv6，代码行数:34，代码来源:contiki-main.c
示例7: ChapSendChallenge
/*
* ChapSendChallenge - Send an Authenticate challenge.
*/
static void
ChapSendChallenge(
chap_state *cstate)
{
u_char *outp;
int chal_len, name_len;
int outlen;
chal_len = cstate->chal_len;
name_len = strlen(cstate->chal_name);
outlen = CHAP_HEADERLEN + sizeof (u_char) + chal_len + name_len;
outp = outpacket_buf;
MAKEHEADER(outp, PPP_CHAP); /* paste in a CHAP header */
PUTCHAR(CHAP_CHALLENGE, outp);
PUTCHAR(cstate->chal_id, outp);
PUTSHORT(outlen, outp);
PUTCHAR(chal_len, outp); /* put length of challenge */
BCOPY(cstate->challenge, outp, chal_len);
INCPTR(chal_len, outp);
BCOPY(cstate->chal_name, outp, name_len); /* append hostname */
output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
TIMEOUT(ChapChallengeTimeout, cstate, cstate->timeouttime);
++cstate->chal_transmits;
}
开发者ID:AoLaD，项目名称:rtems，代码行数:33，代码来源:chap.c
示例8: do_conversion_string
static int
do_conversion_string (const char *str, int f, int width, int precision,
int (*func)(int c, void *data), void *data)
{
int len;
int n = 0;
int leftsp = 0, rightsp = 0;
len = 0;
while (!((f & HAS_PRECISION) && len >= precision) &&
str[len] != '\0')
len++;
if ((f & HAS_WIDTH) && width > len) {
if (f & FLAG_LEFT_ADJUSTED)
rightsp = width - len;
else
leftsp = width - len;
}
while (leftsp--)
PUTCHAR (' ');
while (len--)
PUTCHAR (*str++);
while (rightsp--)
PUTCHAR (' ');
error:
return n;
}
开发者ID:anbangr，项目名称:bitvisor-dev，代码行数:27，代码来源:lib_printf.c
示例9: main
int main()
{
int t;
t=readInt();
while(t--)
{
int num=103993%33102;
int den=33102;
int n;
n=readInt();
PUTCHAR('3');
if(n>0)
{
PUTCHAR('.');
while(n)
{
num=num*10;
PUTCHAR('0'+num/den);
num=num%den;
n--;
}
}
PUTCHAR('\n');
}
return 0;
}
开发者ID:PeacefulAbhyasi，项目名称:Competitive-Programming，代码行数:28，代码来源:APPROXC.cpp
示例10: fsm_sdata
/*
* fsm_sdata - Send some data.
*
* Used for all packets sent to our peer by this module.
*/
void fsm_sdata(fsm *f, u_char code, u_char id, const u_char *data, int datalen) {
ppp_pcb *pcb = f->pcb;
struct pbuf *p;
u_char *outp;
int outlen;
/* Adjust length to be smaller than MTU */
if (datalen > pcb->peer_mru - HEADERLEN)
datalen = pcb->peer_mru - HEADERLEN;
outlen = datalen + HEADERLEN;
p = pbuf_alloc(PBUF_RAW, (u16_t)(outlen + PPP_HDRLEN), PPP_CTRL_PBUF_TYPE);
if(NULL == p)
return;
if(p->tot_len != p->len) {
pbuf_free(p);
return;
}
outp = (u_char*)p->payload;
if (datalen) /* && data != outp + PPP_HDRLEN + HEADERLEN) -- was only for fsm_sconfreq() */
MEMCPY(outp + PPP_HDRLEN + HEADERLEN, data, datalen);
MAKEHEADER(outp, f->protocol);
PUTCHAR(code, outp);
PUTCHAR(id, outp);
PUTSHORT(outlen, outp);
ppp_write(pcb, p);
}
开发者ID:MuesliReep，项目名称:STM-Nucleo-F746ZG-TCP-UDP-example，代码行数:33，代码来源:fsm.c
示例11: my_puts
void my_puts(char *s)
{
while(*s)
PUTCHAR(*s++);
PUTCHAR('\n');
}
开发者ID:phanirajkiran，项目名称:cs107e.github.io，代码行数:7，代码来源:program.c
示例12: SendKeys
void
SendKeys (int player, int c)
{
PUTHEAD (SKEY);
PUTCHAR (buffer + HEADSIZE, c);
PUTCHAR (buffer + HEADSIZE + 1, player);
csendreliable (buffer, HEADSIZE + 2);
}
开发者ID:senquack，项目名称:Koules-for-Handhelds，代码行数:8，代码来源:client.c
示例13: SendRotation
void
SendRotation (int player, int c)
{
PUTHEAD (SROT);
PUTCHAR (buffer + HEADSIZE, c);
PUTCHAR (buffer + HEADSIZE + 1, player);
csendreliable (buffer, HEADSIZE + 2);
}
开发者ID:senquack，项目名称:Koules-for-Handhelds，代码行数:8，代码来源:client.c
示例14: printf_response
/*********************************************************************************************************
* Function to print a modem response to the serial terminal
* This function is used instead of printf because the PE Micro terminal only sends \r for a keyboard entry
* The function adds a \n to every \r received
************************************************************************************************************/
void printf_response(char * ptr)
{
while(*ptr != '\0')
{
PUTCHAR(*ptr);
if(*ptr++ == '\r')
PUTCHAR('\n');
}
}
开发者ID:saoirse-stewie，项目名称:Project-，代码行数:14，代码来源:Uart_gsm.c
示例15: fsm_sconfreq
/*
* fsm_sconfreq - Send a Configure-Request.
*/
static void fsm_sconfreq(fsm *f, int retransmit) {
ppp_pcb *pcb = f->pcb;
struct pbuf *p;
u_char *outp;
int cilen;
if( f->state != PPP_FSM_REQSENT && f->state != PPP_FSM_ACKRCVD && f->state != PPP_FSM_ACKSENT ){
/* Not currently negotiating - reset options */
if( f->callbacks->resetci )
(*f->callbacks->resetci)(f);
f->nakloops = 0;
f->rnakloops = 0;
}
if( !retransmit ){
/* New request - reset retransmission counter, use new ID */
f->retransmits = pcb->settings.fsm_max_conf_req_transmits;
f->reqid = ++f->id;
}
f->seen_ack = 0;
/*
* Make up the request packet
*/
if( f->callbacks->cilen && f->callbacks->addci ){
cilen = (*f->callbacks->cilen)(f);
if( cilen > pcb->peer_mru - HEADERLEN )
cilen = pcb->peer_mru - HEADERLEN;
} else
cilen = 0;
p = pbuf_alloc(PBUF_RAW, (u16_t)(cilen + HEADERLEN + PPP_HDRLEN), PPP_CTRL_PBUF_TYPE);
if(NULL == p)
return;
if(p->tot_len != p->len) {
pbuf_free(p);
return;
}
/* send the request to our peer */
outp = (u_char*)p->payload;
MAKEHEADER(outp, f->protocol);
PUTCHAR(CONFREQ, outp);
PUTCHAR(f->reqid, outp);
PUTSHORT(cilen + HEADERLEN, outp);
if (cilen != 0) {
(*f->callbacks->addci)(f, outp, &cilen);
LWIP_ASSERT("cilen == p->len - HEADERLEN - PPP_HDRLEN", cilen == p->len - HEADERLEN - PPP_HDRLEN);
}
ppp_write(pcb, p);
/* start the retransmit timer */
--f->retransmits;
TIMEOUT(fsm_timeout, f, pcb->settings.fsm_timeout_time);
}
开发者ID:MuesliReep，项目名称:STM-Nucleo-F746ZG-TCP-UDP-example，代码行数:60，代码来源:fsm.c
示例16: SendJoystick
void
SendJoystick (int player, int x, int y, int buttons)
{
PUTHEAD (SJOYSTICK);
PUTSHORT (buffer + HEADSIZE, x);
PUTSHORT (buffer + HEADSIZE + 2, y);
PUTCHAR (buffer + HEADSIZE + 4, buttons);
PUTCHAR (buffer + HEADSIZE + 5, player);
csendreliable (buffer, HEADSIZE + 6);
}
开发者ID:senquack，项目名称:Koules-for-Handhelds，代码行数:10，代码来源:client.c
示例17: SendMouse
void
SendMouse (int player, int x, int y, int buttons)
{
PUTHEAD (SMOUSE);
PUTSHORT (buffer + HEADSIZE, x);
PUTSHORT (buffer + HEADSIZE + 2, y);
PUTCHAR (buffer + HEADSIZE + 4, buttons);
PUTCHAR (buffer + HEADSIZE + 5, player);
csendreliable (buffer, HEADSIZE + 6);
}
开发者ID:senquack，项目名称:Koules-for-Handhelds，代码行数:10，代码来源:client.c
示例18: GetString
//-----------------------------------------------------------------------------
// GetString
//-----------------------------------------------------------------------------
//
// Return Value : Pointer to string containing buffer read from UART.
// Parameters : <buf> to store string; maximum <n>umber of characters to
// read; <n> must be 2 or greater.
//
// This function returns a string of maximum length <n>.
//-----------------------------------------------------------------------------
int GetString()
{
char c;
int len = 0;
char *buffer = Command;
int max_length = sizeof(Command) - 1;
SetLedPeriod(900, 100);
printf("READY\r\n> ");
while(1)
{
c = GETCHAR();
if (c != '\0')
{
if (c == '\b' || c == 0x7F)
{
if (len != 0)
{
PUTCHAR(c);
--len;
--buffer;
}
}
else if (c == '\r' || c == '\n')
{
SetLedPeriod(0, 0);
PUTCHAR('\n');
if (max_length == 0)
{
printf("Result: FF COMMAND_TOO_LONG\n");
buffer = Command;
}
*buffer = '\0';
return len;
}
else if (len != max_length)
{
PUTCHAR(c);
*buffer++ = c;
len++;
}
else
{
max_length = 0;
len = 0;
}
}
}
}
开发者ID:conorpp，项目名称:C2.Flash，代码行数:60，代码来源:C2_Main.c
示例19: UARTCharPut
void UARTCharPut(unsigned long ulBase, unsigned char ucData)
/*****************************************************************************
* Function: See header file.
****************************************************************************/
{
PUTCHAR(ucData);
}
开发者ID:anbae12，项目名称:Code，代码行数:7，代码来源:uartprintf.c
示例20: PROCESS_THREAD
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(border_router_process, ev, data)
{
static struct etimer et;
PROCESS_BEGIN();
PUTSTRING("Border Router started\n");
prefix_set = 0;
leds_on(LEDS_GREEN);
/* Request prefix until it has been received */
while(!prefix_set) {
leds_on(LEDS_RED);
PUTSTRING("Prefix request.\n");
etimer_set(&et, CLOCK_SECOND);
request_prefix();
leds_off(LEDS_RED);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
}
/* We have created a new DODAG when we reach here */
PUTSTRING("On Channel ");
PUTDEC(cc2530_rf_channel_get());
PUTCHAR('\n');
print_local_addresses();
leds_off(LEDS_GREEN);
PROCESS_EXIT();
PROCESS_END();
}
开发者ID:1uk3，项目名称:contiki，代码行数:33，代码来源:border-router.c
注：本文中的PUTCHAR函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论