C++ PRINTK_2函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PRINTK_2函数的典型用法代码示例。如果您正苦于以下问题：C++ PRINTK_2函数的具体用法？C++ PRINTK_2怎么用？C++ PRINTK_2使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PRINTK_2函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: dsp3780I_WriteGenCfg

static void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex,
                                 unsigned char ucValue)
{
    DSP_ISA_SLAVE_CONTROL rSlaveControl;
    DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;


    PRINTK_4(TRACE_3780I,
             "3780i::dsp3780i_WriteGenCfg entry usDspBaseIO %x uIndex %x ucValue %x\n",
             usDspBaseIO, uIndex, ucValue);

    MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);

    PRINTK_2(TRACE_3780I,
             "3780i::dsp3780i_WriteGenCfg rSlaveControl %x\n",
             MKBYTE(rSlaveControl));

    rSlaveControl_Save = rSlaveControl;
    rSlaveControl.ConfigMode = TRUE;

    PRINTK_2(TRACE_3780I,
             "3780i::dsp3780i_WriteGenCfg entry rSlaveControl+ConfigMode %x\n",
             MKBYTE(rSlaveControl));

    OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
    OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
    OutByteDsp(DSP_ConfigData, ucValue);
    OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));

    PRINTK_1(TRACE_3780I, "3780i::dsp3780i_WriteGenCfg exit\n");


}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:33，代码来源:3780i.c

示例2: tp3780I_ClaimResources

int tp3780I_ClaimResources(THINKPAD_BD_DATA * pBDData)
{
	int retval = 0;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
	struct resource *pres;
#endif

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_ClaimResources entry pBDData %p\n", pBDData);

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
	pres = request_region(pSettings->usDspBaseIO, 16, "mwave_3780i");
	if ( pres == NULL ) retval = -EIO;
#else
	retval = check_region(pSettings->usDspBaseIO, 16);
	if (!retval) request_region(pSettings->usDspBaseIO, 16, "mwave_3780i");
#endif
	if (retval) {
		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_ClaimResources: Error: Could not claim I/O region starting at %x\n", pSettings->usDspBaseIO);
		retval = -EIO;
	}

	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_ClaimResources exit retval %x\n", retval);

	return retval;
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:27，代码来源:tp3780i.c

示例3: DspInterrupt

static irqreturn_t DspInterrupt(int irq, void *dev_id)
{
	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pDrvData->rBDData.rDspSettings;
	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
	unsigned short usIPCSource = 0, usIsolationMask, usPCNum;

	PRINTK_3(TRACE_TP3780I,
		"tp3780i::DspInterrupt entry irq %x dev_id %p\n", irq, dev_id);

	if (dsp3780I_GetIPCSource(usDspBaseIO, &usIPCSource) == 0) {
		PRINTK_2(TRACE_TP3780I,
			"tp3780i::DspInterrupt, return from dsp3780i_GetIPCSource, usIPCSource %x\n",
			usIPCSource);
		usIsolationMask = 1;
		for (usPCNum = 1; usPCNum <= 16; usPCNum++) {
			if (usIPCSource & usIsolationMask) {
				usIPCSource &= ~usIsolationMask;
				PRINTK_3(TRACE_TP3780I,
					"tp3780i::DspInterrupt usPCNum %x usIPCSource %x\n",
					usPCNum, usIPCSource);
				if (pDrvData->IPCs[usPCNum - 1].usIntCount == 0) {
					pDrvData->IPCs[usPCNum - 1].usIntCount = 1;
				}
				PRINTK_2(TRACE_TP3780I,
					"tp3780i::DspInterrupt usIntCount %x\n",
					pDrvData->IPCs[usPCNum - 1].usIntCount);
				if (pDrvData->IPCs[usPCNum - 1].bIsEnabled == TRUE) {
					PRINTK_2(TRACE_TP3780I,
						"tp3780i::DspInterrupt, waking up usPCNum %x\n",
						usPCNum - 1);
					wake_up_interruptible(&pDrvData->IPCs[usPCNum - 1].ipc_wait_queue);
				} else {
					PRINTK_2(TRACE_TP3780I,
						"tp3780i::DspInterrupt, no one waiting for IPC %x\n",
						usPCNum - 1);
				}
			}
			if (usIPCSource == 0)
				break;
			/*              */
			usIsolationMask = usIsolationMask << 1;
		}
	} else {
		PRINTK_1(TRACE_TP3780I,
			"tp3780i::DspInterrupt, return false from dsp3780i_GetIPCSource\n");
	}
	PRINTK_1(TRACE_TP3780I, "tp3780i::DspInterrupt exit\n");
	return IRQ_HANDLED;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:50，代码来源:tp3780i.c

示例4: dsp3780I_ReadGenCfg

unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO,
                                  unsigned uIndex)
{
    DSP_ISA_SLAVE_CONTROL rSlaveControl;
    DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;
    unsigned char ucValue;


    PRINTK_3(TRACE_3780I,
             "3780i::dsp3780i_ReadGenCfg entry usDspBaseIO %x uIndex %x\n",
             usDspBaseIO, uIndex);

    MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);
    rSlaveControl_Save = rSlaveControl;
    rSlaveControl.ConfigMode = TRUE;
    OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
    OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
    ucValue = InByteDsp(DSP_ConfigData);
    OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));

    PRINTK_2(TRACE_3780I,
             "3780i::dsp3780i_ReadGenCfg exit ucValue %x\n", ucValue);


    return ucValue;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:26，代码来源:3780i.c

示例5: tp3780I_QueryAbilities

int tp3780I_QueryAbilities(THINKPAD_BD_DATA * pBDData, MW_ABILITIES * pAbilities)
{
	int retval = 0;

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_QueryAbilities entry pBDData %p\n", pBDData);

	/*                                   */
	pAbilities->instr_per_sec = pBDData->rDspSettings.uIps;
	pAbilities->data_size = pBDData->rDspSettings.uDStoreSize;
	pAbilities->inst_size = pBDData->rDspSettings.uIStoreSize;
	pAbilities->bus_dma_bw = pBDData->rDspSettings.uDmaBandwidth;

	/*                                        */
	pAbilities->component_list[0] = 0x00010000 | MW_ADC_MASK;
	pAbilities->component_list[1] = 0x00010000 | MW_ACI_MASK;
	pAbilities->component_list[2] = 0x00010000 | MW_AIC1_MASK;
	pAbilities->component_list[3] = 0x00010000 | MW_AIC2_MASK;
	pAbilities->component_list[4] = 0x00010000 | MW_CDDAC_MASK;
	pAbilities->component_list[5] = 0x00010000 | MW_MIDI_MASK;
	pAbilities->component_list[6] = 0x00010000 | MW_UART_MASK;
	pAbilities->component_count = 7;

	/*                                       */

	memcpy(pAbilities->mwave_os_name, TP_ABILITIES_MWAVEOS_NAME,
		sizeof(TP_ABILITIES_MWAVEOS_NAME));
	memcpy(pAbilities->bios_task_name, TP_ABILITIES_BIOSTASK_NAME,
		sizeof(TP_ABILITIES_BIOSTASK_NAME));

	PRINTK_1(TRACE_TP3780I,
		"tp3780i::tp3780I_QueryAbilities exit retval=SUCCESSFUL\n");

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:35，代码来源:tp3780i.c

示例6: tp3780I_ReadWriteDspIStore

int tp3780I_ReadWriteDspIStore(THINKPAD_BD_DATA * pBDData, unsigned int uOpcode,
                               void __user *pvBuffer, unsigned int uCount,
                               unsigned long ulDSPAddr)
{
	int retval = 0;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;
	unsigned short usDspBaseIO = pSettings->usDspBaseIO;
	BOOLEAN bRC = 0;

	PRINTK_6(TRACE_TP3780I,
		"tp3780i::tp3780I_ReadWriteDspIStore entry pBDData %p, uOpcode %x, pvBuffer %p, uCount %x, ulDSPAddr %lx\n",
		pBDData, uOpcode, pvBuffer, uCount, ulDSPAddr);

	if (pBDData->bDSPEnabled) {
		switch (uOpcode) {
		case IOCTL_MW_READ_INST:
			bRC = dsp3780I_ReadIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
			break;

		case IOCTL_MW_WRITE_INST:
			bRC = dsp3780I_WriteIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
			break;
		}
	}

	retval = (bRC) ? -EIO : 0;

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_ReadWriteDspIStore exit retval %x\n", retval);

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:32，代码来源:tp3780i.c

示例7: tp3780I_StartDSP

int tp3780I_StartDSP(THINKPAD_BD_DATA * pBDData)
{
	int retval = 0;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;

	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP entry pBDData %p\n", pBDData);

	if (dsp3780I_Run(pSettings) == 0) {
		//                               
	} else {
		retval = -EIO;
	}

	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_StartDSP exit retval %x\n", retval);

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:17，代码来源:tp3780i.c

示例8: tp3780I_Cleanup

int tp3780I_Cleanup(THINKPAD_BD_DATA * pBDData)
{
	int retval = 0;

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_Cleanup entry and exit pBDData %p\n", pBDData);

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:9，代码来源:tp3780i.c

示例9: dsp3780I_Reset

int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings)
{
    unsigned long flags;
    unsigned short usDspBaseIO = pSettings->usDspBaseIO;
    DSP_BOOT_DOMAIN rBootDomain;
    DSP_HBRIDGE_CONTROL rHBridgeControl;


    PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset entry\n");

    spin_lock_irqsave(&dsp_lock, flags);
    /* Mask DSP to PC interrupt */
    MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);

    PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rHBridgeControl %x\n",
             MKWORD(rHBridgeControl));

    rHBridgeControl.EnableDspInt = FALSE;
    OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
    spin_unlock_irqrestore(&dsp_lock, flags);

    /* Reset the core via the boot domain register */
    rBootDomain.ResetCore = TRUE;
    rBootDomain.Halt = TRUE;
    rBootDomain.NMI = TRUE;
    rBootDomain.Reserved = 0;

    PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rBootDomain %x\n",
             MKWORD(rBootDomain));

    WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));

    /* Reset all the chiplets and then reactivate them */
    WriteMsaCfg(DSP_ChipReset, 0xFFFF);
    udelay(5);
    WriteMsaCfg(DSP_ChipReset,
                (unsigned short) (~pSettings->usChipletEnable));


    PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset exit bRC=0\n");

    return 0;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:43，代码来源:3780i.c

示例10: tp3780I_ReleaseResources

int tp3780I_ReleaseResources(THINKPAD_BD_DATA * pBDData)
{
	int retval = 0;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_ReleaseResources entry pBDData %p\n", pBDData);

	release_region(pSettings->usDspBaseIO & (~3), 16);

	if (pSettings->bInterruptClaimed) {
		free_irq(pSettings->usDspIrq, NULL);
		pSettings->bInterruptClaimed = FALSE;
	}

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_ReleaseResources exit retval %x\n", retval);

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:20，代码来源:tp3780i.c

示例11: mwave_open

static int mwave_open(struct inode *inode, struct file *file)
{
	unsigned int retval = 0;

	PRINTK_3(TRACE_MWAVE,
		"mwavedd::mwave_open, entry inode %p file %p\n",
		 inode, file);
	PRINTK_2(TRACE_MWAVE,
		"mwavedd::mwave_open, exit return retval %x\n", retval);

	return retval;
}

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:12，代码来源:mwavedd.c

示例12: tp3780I_DisableDSP

int tp3780I_DisableDSP(THINKPAD_BD_DATA * pBDData)
{
	int retval = 0;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;

	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP entry pBDData %p\n", pBDData);

	if (pBDData->bDSPEnabled) {
		dsp3780I_DisableDSP(&pBDData->rDspSettings);
		if (pSettings->bInterruptClaimed) {
			free_irq(pSettings->usDspIrq, NULL);
			pSettings->bInterruptClaimed = FALSE;
		}
		smapi_set_DSP_power_state(FALSE);
		pBDData->bDSPEnabled = FALSE;
	}

	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_DisableDSP exit retval %x\n", retval);

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:21，代码来源:tp3780i.c

示例13: mwave_open

static int mwave_open(struct inode *inode, struct file *file)
{
	unsigned int retval = 0;

	PRINTK_3(TRACE_MWAVE,
		"mwavedd::mwave_open, entry inode %x file %x\n",
		(int) inode, (int) file);
	PRINTK_2(TRACE_MWAVE,
		"mwavedd::mwave_open, exit return retval %x\n", retval);

	MOD_INC_USE_COUNT;
	return retval;
}

开发者ID:jameshilliard，项目名称:core1-tar4F9632C8CCCE，代码行数:13，代码来源:mwavedd.c

示例14: tp3780I_InitializeBoardData

int tp3780I_InitializeBoardData(THINKPAD_BD_DATA * pBDData)
{
	int retval = 0;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;


	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData entry pBDData %p\n", pBDData);

	pBDData->bDSPEnabled = FALSE;
	pSettings->bInterruptClaimed = FALSE;

	retval = smapi_init();
	if (retval) {
		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine\n");
	} else {
		if (mwave_3780i_irq || mwave_3780i_io || mwave_uart_irq || mwave_uart_io) {
			retval = smapi_set_DSP_cfg();
		}
	}

	PRINTK_2(TRACE_TP3780I, "tp3780i::tp3780I_InitializeBoardData exit retval %x\n", retval);

	return retval;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:24，代码来源:tp3780i.c

示例15: tp3780I_CalcResources

int tp3780I_CalcResources(THINKPAD_BD_DATA * pBDData)
{
	SMAPI_DSP_SETTINGS rSmapiInfo;
	DSP_3780I_CONFIG_SETTINGS *pSettings = &pBDData->rDspSettings;

	PRINTK_2(TRACE_TP3780I,
		"tp3780i::tp3780I_CalcResources entry pBDData %p\n", pBDData);

	if (smapi_query_DSP_cfg(&rSmapiInfo)) {
		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting.\n");
		return -EIO;
	}

	/*              */
	if (
		( rSmapiInfo.usDspIRQ == 0 )
		|| ( rSmapiInfo.usDspBaseIO ==  0 )
		|| ( rSmapiInfo.usUartIRQ ==  0 )
		|| ( rSmapiInfo.usUartBaseIO ==  0 )
	) {
		PRINTK_ERROR(KERN_ERR_MWAVE "tp3780i::tp3780I_CalcResources: Error: Illegal resource setting. Aborting.\n");
		return -EIO;
	}

	pSettings->bDSPEnabled = (rSmapiInfo.bDSPEnabled && rSmapiInfo.bDSPPresent);
	pSettings->bModemEnabled = rSmapiInfo.bModemEnabled;
	pSettings->usDspIrq = rSmapiInfo.usDspIRQ;
	pSettings->usDspDma = rSmapiInfo.usDspDMA;
	pSettings->usDspBaseIO = rSmapiInfo.usDspBaseIO;
	pSettings->usUartIrq = rSmapiInfo.usUartIRQ;
	pSettings->usUartBaseIO = rSmapiInfo.usUartBaseIO;

	pSettings->uDStoreSize = TP_ABILITIES_DATA_SIZE;
	pSettings->uIStoreSize = TP_ABILITIES_INST_SIZE;
	pSettings->uIps = TP_ABILITIES_INTS_PER_SEC;

	if (pSettings->bDSPEnabled && pSettings->bModemEnabled && pSettings->usDspIrq == pSettings->usUartIrq) {
		pBDData->bShareDspIrq = pBDData->bShareUartIrq = 1;
	} else {
		pBDData->bShareDspIrq = pBDData->bShareUartIrq = 0;
	}

	PRINTK_1(TRACE_TP3780I, "tp3780i::tp3780I_CalcResources exit\n");

	return 0;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:46，代码来源:tp3780i.c

示例16: dsp3780I_Run

int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings)
{
    unsigned long flags;
    unsigned short usDspBaseIO = pSettings->usDspBaseIO;
    DSP_BOOT_DOMAIN rBootDomain;
    DSP_HBRIDGE_CONTROL rHBridgeControl;


    PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run entry\n");


    /* Transition the core to a running state */
    rBootDomain.ResetCore = TRUE;
    rBootDomain.Halt = FALSE;
    rBootDomain.NMI = TRUE;
    rBootDomain.Reserved = 0;
    WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));

    udelay(5);

    rBootDomain.ResetCore = FALSE;
    WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
    udelay(5);

    rBootDomain.NMI = FALSE;
    WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
    udelay(5);

    /* Enable DSP to PC interrupt */
    spin_lock_irqsave(&dsp_lock, flags);
    MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
    rHBridgeControl.EnableDspInt = TRUE;

    PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Run rHBridgeControl %x\n",
             MKWORD(rHBridgeControl));

    OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
    spin_unlock_irqrestore(&dsp_lock, flags);


    PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run exit bRC=TRUE\n");

    return 0;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:44，代码来源:3780i.c

示例17: dsp3780I_ReadMsaCfg

unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO,
                                   unsigned long ulMsaAddr)
{
    unsigned short val;

    PRINTK_3(TRACE_3780I,
             "3780i::dsp3780I_ReadMsaCfg entry usDspBaseIO %x ulMsaAddr %lx\n",
             usDspBaseIO, ulMsaAddr);

    spin_lock_irqsave(&dsp_lock, flags);
    OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
    OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
    val = InWordDsp(DSP_MsaDataDSISHigh);
    spin_unlock_irqrestore(&dsp_lock, flags);

    PRINTK_2(TRACE_3780I, "3780i::dsp3780I_ReadMsaCfg exit val %x\n", val);

    return val;
}

开发者ID:BackupTheBerlios，项目名称:tuxap，代码行数:19，代码来源:3780i.c

示例18: dsp3780I_GetIPCSource

int dsp3780I_GetIPCSource(unsigned short usDspBaseIO,
                          unsigned short *pusIPCSource)
{
    unsigned long flags;
    DSP_HBRIDGE_CONTROL rHBridgeControl;
    unsigned short temp;


    PRINTK_3(TRACE_3780I,
             "3780i::dsp3780I_GetIPCSource entry usDspBaseIO %x pusIPCSource %p\n",
             usDspBaseIO, pusIPCSource);

    /*
    * Disable DSP to PC interrupts, read the interrupt register,
    * clear the pending IPC bits, and reenable DSP to PC interrupts
    */
    spin_lock_irqsave(&dsp_lock, flags);
    MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
    rHBridgeControl.EnableDspInt = FALSE;
    OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));

    *pusIPCSource = InWordDsp(DSP_Interrupt);
    temp = (unsigned short) ~(*pusIPCSource);

    PRINTK_3(TRACE_3780I,
             "3780i::dsp3780I_GetIPCSource, usIPCSource %x ~ %x\n",
             *pusIPCSource, temp);

    OutWordDsp(DSP_Interrupt, (unsigned short) ~(*pusIPCSource));

    rHBridgeControl.EnableDspInt = TRUE;
    OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
    spin_unlock_irqrestore(&dsp_lock, flags);


    PRINTK_2(TRACE_3780I,
             "3780i::dsp3780I_GetIPCSource exit usIPCSource %x\n",
             *pusIPCSource);

    return 0;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:41，代码来源:3780i.c

示例19: mwave_init

static int __init mwave_init(void)
{
	int i;
	int retval = 0;
	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;

	PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n");

	memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA));

	pDrvData->bBDInitialized = FALSE;
	pDrvData->bResourcesClaimed = FALSE;
	pDrvData->bDSPEnabled = FALSE;
	pDrvData->bDSPReset = FALSE;
	pDrvData->bMwaveDevRegistered = FALSE;
	pDrvData->sLine = -1;

	for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
		pDrvData->IPCs[i].bIsEnabled = FALSE;
		pDrvData->IPCs[i].bIsHere = FALSE;
		pDrvData->IPCs[i].usIntCount = 0;	/* no ints received yet */
		init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
	}

	retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
	PRINTK_2(TRACE_MWAVE,
		"mwavedd::mwave_init, return from tp3780I_InitializeBoardData"
		" retval %x\n",
		retval);
	if (retval) {
		PRINTK_ERROR(KERN_ERR_MWAVE
				"mwavedd::mwave_init: Error:"
				" Failed to initialize board data\n");
		goto cleanup_error;
	}
	pDrvData->bBDInitialized = TRUE;

	retval = tp3780I_CalcResources(&pDrvData->rBDData);
	PRINTK_2(TRACE_MWAVE,
		"mwavedd::mwave_init, return from tp3780I_CalcResources"
		" retval %x\n",
		retval);
	if (retval) {
		PRINTK_ERROR(KERN_ERR_MWAVE
				"mwavedd:mwave_init: Error:"
				" Failed to calculate resources\n");
		goto cleanup_error;
	}

	retval = tp3780I_ClaimResources(&pDrvData->rBDData);
	PRINTK_2(TRACE_MWAVE,
		"mwavedd::mwave_init, return from tp3780I_ClaimResources"
		" retval %x\n",
		retval);
	if (retval) {
		PRINTK_ERROR(KERN_ERR_MWAVE
				"mwavedd:mwave_init: Error:"
				" Failed to claim resources\n");
		goto cleanup_error;
	}
	pDrvData->bResourcesClaimed = TRUE;

	retval = tp3780I_EnableDSP(&pDrvData->rBDData);
	PRINTK_2(TRACE_MWAVE,
		"mwavedd::mwave_init, return from tp3780I_EnableDSP"
		" retval %x\n",
		retval);
	if (retval) {
		PRINTK_ERROR(KERN_ERR_MWAVE
				"mwavedd:mwave_init: Error:"
				" Failed to enable DSP\n");
		goto cleanup_error;
	}
	pDrvData->bDSPEnabled = TRUE;

	if (misc_register(&mwave_misc_dev) < 0) {
		PRINTK_ERROR(KERN_ERR_MWAVE
				"mwavedd:mwave_init: Error:"
				" Failed to register misc device\n");
		goto cleanup_error;
	}
	pDrvData->bMwaveDevRegistered = TRUE;

	pDrvData->sLine = register_serial_portandirq(
		pDrvData->rBDData.rDspSettings.usUartBaseIO,
		pDrvData->rBDData.rDspSettings.usUartIrq
	);
	if (pDrvData->sLine < 0) {
		PRINTK_ERROR(KERN_ERR_MWAVE
				"mwavedd:mwave_init: Error:"
				" Failed to register serial driver\n");
		goto cleanup_error;
	}
	/* uart is registered */

#if 0
	/* sysfs */
	memset(&mwave_device, 0, sizeof (struct device));
	dev_set_name(&mwave_device, "mwave");

//.........这里部分代码省略.........

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:101，代码来源:mwavedd.c

示例20: mwave_ioctl

static int mwave_ioctl(struct inode *inode, struct file *file,
                       unsigned int iocmd, unsigned long ioarg)
{
	unsigned int retval = 0;
	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;

	PRINTK_5(TRACE_MWAVE,
		"mwavedd::mwave_ioctl, entry inode %x file %x cmd %x arg %x\n",
		(int) inode, (int) file, iocmd, (int) ioarg);

	switch (iocmd) {

		case IOCTL_MW_RESET:
			PRINTK_1(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_RESET calling tp3780I_ResetDSP\n");
			retval = tp3780I_ResetDSP(&pDrvData->rBDData);
			PRINTK_2(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_RESET retval %x from tp3780I_ResetDSP\n",
				retval);
			break;
	
		case IOCTL_MW_RUN:
			PRINTK_1(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_RUN calling tp3780I_StartDSP\n");
			retval = tp3780I_StartDSP(&pDrvData->rBDData);
			PRINTK_2(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_RUN retval %x from tp3780I_StartDSP\n",
				retval);
			break;
	
		case IOCTL_MW_DSP_ABILITIES: {
			MW_ABILITIES rAbilities;
	
			PRINTK_1(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES calling tp3780I_QueryAbilities\n");
			retval = tp3780I_QueryAbilities(&pDrvData->rBDData, &rAbilities);
			PRINTK_2(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES retval %x from tp3780I_QueryAbilities\n",
				retval);
			if (retval == 0) {
				if( copy_to_user((char *) ioarg, (char *) &rAbilities, sizeof(MW_ABILITIES)) )
					return -EFAULT;
			}
			PRINTK_2(TRACE_MWAVE,
				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES exit retval %x\n",
				retval);
		}
			break;
	
		case IOCTL_MW_READ_DATA:
		case IOCTL_MW_READCLEAR_DATA: {
			MW_READWRITE rReadData;
			unsigned short *pusBuffer = 0;
	
			if( copy_from_user((char *) &rReadData, (char *) ioarg, sizeof(MW_READWRITE)) )
				return -EFAULT;
			pusBuffer = (unsigned short *) (rReadData.pBuf);
	
			PRINTK_4(TRACE_MWAVE,
				"mwavedd::mwave_ioctl IOCTL_MW_READ_DATA, size %lx, ioarg %lx pusBuffer %p\n",
				rReadData.ulDataLength, ioarg, pusBuffer);
			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, iocmd,
				(void *) pusBuffer, rReadData.ulDataLength, rReadData.usDspAddress);
		}
			break;
	
		case IOCTL_MW_READ_INST: {
			MW_READWRITE rReadData;
			unsigned short *pusBuffer = 0;
	
			if( copy_from_user((char *) &rReadData, (char *) ioarg, sizeof(MW_READWRITE)) )
				return -EFAULT;
			pusBuffer = (unsigned short *) (rReadData.pBuf);
	
			PRINTK_4(TRACE_MWAVE,
				"mwavedd::mwave_ioctl IOCTL_MW_READ_INST, size %lx, ioarg %lx pusBuffer %p\n",
				rReadData.ulDataLength / 2, ioarg,
				pusBuffer);
			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
				iocmd, pusBuffer,
				rReadData.ulDataLength / 2,
				rReadData.usDspAddress);
		}
			break;
	
		case IOCTL_MW_WRITE_DATA: {
			MW_READWRITE rWriteData;
			unsigned short *pusBuffer = 0;
	
			if( copy_from_user((char *) &rWriteData, (char *) ioarg, sizeof(MW_READWRITE)) )
				return -EFAULT;
			pusBuffer = (unsigned short *) (rWriteData.pBuf);
	
			PRINTK_4(TRACE_MWAVE,
				"mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA, size %lx, ioarg %lx pusBuffer %p\n",
				rWriteData.ulDataLength, ioarg,
				pusBuffer);
			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, iocmd,
				pusBuffer, rWriteData.ulDataLength, rWriteData.usDspAddress);
		}
//.........这里部分代码省略.........

开发者ID:jameshilliard，项目名称:core1-tar4F9632C8CCCE，代码行数:101，代码来源:mwavedd.c

注：本文中的PRINTK_2函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PRINTK_AUDDRV函数代码示例发布时间：2022-05-30

C++ PRINTF_DEBUG函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19274|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10014|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8341|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8709|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8655|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9684|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8643|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8011|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8680|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7547|2022-11-06

客服电话

电子邮件

C++ PRINTK_2函数代码示例

示例1: dsp3780I_WriteGenCfg

示例2: tp3780I_ClaimResources

示例3: DspInterrupt

示例4: dsp3780I_ReadGenCfg

示例5: tp3780I_QueryAbilities

示例6: tp3780I_ReadWriteDspIStore

示例7: tp3780I_StartDSP

示例8: tp3780I_Cleanup

示例9: dsp3780I_Reset

示例10: tp3780I_ReleaseResources

示例11: mwave_open

示例12: tp3780I_DisableDSP

示例13: mwave_open

示例14: tp3780I_InitializeBoardData

示例15: tp3780I_CalcResources

示例16: dsp3780I_Run

示例17: dsp3780I_ReadMsaCfg

示例18: dsp3780I_GetIPCSource

示例19: mwave_init

示例20: mwave_ioctl

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

CVE-2022-36321

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053