C++ PRINT1函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PRINT1函数的典型用法代码示例。如果您正苦于以下问题：C++ PRINT1函数的具体用法？C++ PRINT1怎么用？C++ PRINT1使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PRINT1函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: PRINT

// -----------------------------------------------------------------------------
// CGetPartialObject::VerifyParametersL
// Verify if the parameter of the request (i.e. offset) is good.
// -----------------------------------------------------------------------------
//
TBool CGetPartialObject::VerifyParametersL()
    {
    PRINT( _L( "MM MTP => CGetPartialObject::VerifyParametersL" ) );

    __ASSERT_DEBUG( iRequestChecker, Panic( EMmMTPDpRequestCheckNull ) );
    TBool result = EFalse;
    iObjectHandle = Request().Uint32( TMTPTypeRequest::ERequestParameter1 );
    iOffset = Request().Uint32( TMTPTypeRequest::ERequestParameter2 );
    iPartialDataLength = Request().Uint32( TMTPTypeRequest::ERequestParameter3 );

    PRINT3( _L( "MM MTP <> CGetPartialObject::VerifyParametersL iObjectHandle = 0x%x, iOffset = 0x%x, iMaxLength = 0x%x " ),
        iObjectHandle,
        iOffset,
        iPartialDataLength );

    //get object info, but do not have the ownship of the object
    CMTPObjectMetaData* objectInfo = iRequestChecker->GetObjectInfo( iObjectHandle );
    __ASSERT_DEBUG( objectInfo, Panic( EMmMTPDpObjectNull ) );

    const TDesC& suid( objectInfo->DesC( CMTPObjectMetaData::ESuid ) );
    PRINT1( _L( "MM MTP <> CGetPartialObject::VerifyParametersL suid = %S" ), &suid );

    TEntry fileEntry;
    User::LeaveIfError( iFramework.Fs().Entry( suid, fileEntry ) );
    if ( iOffset < fileEntry.FileSize() )
        {
        result = ETrue;
        }

    PRINT1( _L( "MM MTP <= CGetPartialObject::VerifyParametersL result = %d" ), result );
    return result;
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:37，代码来源:cgetpartialobject.cpp

示例2: main

int main(int argc, const char * argv[])
{
    int x, y=1, z;

    if( y!=0) x=5;
    PRINT1(d,x);    //(3.1)

    if(y==0) x=3;
    else x=5;
    PRINT1(d,x);    //(3.2)

    x=1;
    if(y<0) if (y>0) x=3;
        else x=5;
    PRINT1(d,x);    //(3.3)

    if (z=y<0) x=3;
    else if (y==0) x=5;
    else x=7;
    PRINT2(d,x,z);  //(3.4)

    if(z =(y==0))x=5;
    x=3;
    PRINT2(d,x,z);  //(3.5)

    if(x=z=y);
    x=3;
    PRINT2(d,x,z);  //(3.6)
    return 0;
}

开发者ID:risgk，项目名称:misra_c_problems，代码行数:30，代码来源:problem_3.c

示例3: defined

// ----------------------------------------------------------------------------
// CPcsKeyMap::GetMappedString
// ----------------------------------------------------------------------------
QString CPcsKeyMap::GetMappedString(QString aSource) const
	{
#if defined(WRITE_PRED_SEARCH_LOGS)
	const int KLogLength = 30;
	TBuf<KLogLength> log(aSource.left(KLogLength).utf16());
	PRINT1(_L("Enter CPcsKeyMap::GetMappedString input '%S'"), &log);
#endif

	QString destination;
	TBool skipHashStar = DetermineSpecialCharBehaviour(aSource);
	TInt length = aSource.length();

    for (int i = 0; i < length; ++i)
        {
        if (aSource[i] == KSpaceChar)
            {
            destination.append(KSeparatorChar);
            }
        else
			{
			QChar ch(0);
            ch = MappedKeyForChar(aSource[i]);
			if (!ShouldSkipChar(ch, skipHashStar))
				{
				destination.append(ch);
				}
			}
		}
#if defined(WRITE_PRED_SEARCH_LOGS)
	log = destination.left(KLogLength).utf16();
	PRINT1(_L("End CPcsKeyMap::GetMappedString result '%S'"), &log);
#endif
    return destination;
	}

开发者ID:kuailexs，项目名称:symbiandump-mw3，代码行数:37，代码来源:cpcskeymap.cpp

示例4: PRINT1

TBool CPredictiveSearchSynchronizer::CheckIfPredSearchTableExistsL(
	const TDesC& aTableName) const
	{
	PRINT1(_L("CPredictiveSearchSynchronizer::CheckIfPredSearchTableExistsL table='%S'"),
		   &aTableName);

	_LIT(KSelectFirstTableFormat,
		 "SELECT name FROM sqlite_master WHERE type='table' AND name='%S';");

	TInt bufSize = KSelectFirstTableFormat().Length() +
				   aTableName.Length();
	HBufC* select = HBufC::NewLC(bufSize);
	select->Des().AppendFormat(KSelectFirstTableFormat, &aTableName);
	RSqlStatement stmnt;
	CleanupClosePushL(stmnt);
    stmnt.PrepareL(iDatabase, *select);

	TBool tableExists = (stmnt.Next() == KSqlAtRow);

	CleanupStack::PopAndDestroy(&stmnt);
	CleanupStack::PopAndDestroy(select);

	PRINT1(_L("CPredictiveSearchSynchronizer::CheckIfPredSearchTablesExistL return %d"),
		   tableExists);
	return tableExists;
	}

开发者ID:bavanisp，项目名称:qtmobility-1.1.0，代码行数:26，代码来源:cpredictivesearchsynchronizer.cpp

示例5: PRINT1

// -----------------------------------------------------------------------------
// CMediaMtpDataProviderEnumerator::RunL
// Update the mpx db flag for round trip
// -----------------------------------------------------------------------------
//
void CMediaMtpDataProviderEnumerator::RunL()
    {
    PRINT1( _L( "MM MTP => CMediaMtpDataProviderEnumerator::RunL iStorages.Count() = %d" ), iStorages.Count() );

    if ( iStorages.Count() > 0 )
        {
        const CMTPStorageMetaData& storage( iFramework.StorageMgr().StorageL( iStorages[0] ) );
        TPtrC root( storage.DesC( CMTPStorageMetaData::EStorageSuid ) );
        GetModifiedContentL( root );
        TRAPD( err, iDataProvider.GetWrapperL().UpdateMusicCollectionL( root ) );
        if ( err != KErrNone )
            {
            PRINT1( _L("MM MTP <> CMediaMtpDataProviderEnumerator::RunL, UpdateMusicCollectionL err =%d "), err );            
            }
        iStorages.Remove( 0 );
        TRequestStatus* status = &iStatus;
        User::RequestComplete( status, iStatus.Int() );
        SetActive();
        }
    else
        {
        iStorages.Reset();
        SignalCompleteL( iDataProvider );
        }
    PRINT( _L( "MM MTP <= CMediaMtpDataProviderEnumerator::RunL" ) );
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:31，代码来源:cmediamtpdataproviderenumerator.cpp

示例6: PRINT

// -----------------------------------------------------------------------------
// CSendObject::SaveEmptyFileL
// -----------------------------------------------------------------------------
//
void CSendObject::SaveEmptyFileL()
    {
    PRINT( _L( "MM MTP => CSendObject::SaveEmptyFileL" ) );

    if ( EMTPFormatCodeAbstractAudioVideoPlaylist == iObjectFormat )
        {
        TInt err = iFileReceived->File().SetAtt( KEntryAttSystem | KEntryAttHidden,
            KEntryAttReadOnly | KEntryAttNormal );
        if ( err != KErrNone )
            PRINT1( _L( "MM MTP <> CSendObject::SaveEmptyFileL err = %d" ), err );
        iDpConfig.GetWrapperL().AddDummyFileL( iFullPath );
        }

    // Set subformat code to avoid MPX query for the first time to GetObjectReference,
    // in which case references has been kept in fw.
    if ( MmMtpDpUtility::HasReference( iObjectFormat ) )
        iReceivedObjectInfo->SetUint( CMTPObjectMetaData::EFormatSubCode, EMTPSubFormatCodeUndefined );

    // add playlist to MPX DB
    TRAPD( err, AddMediaToStoreL() );

    if ( err != KErrNone )
        iRollbackList.Append( &CSendObject::RemoveObjectFromDbL );
    else
        iRollbackList.Reset();

    PRINT1( _L( "MM MTP <= CSendObject::SaveEmptyFileL err = %d" ), err );
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:32，代码来源:csendobject.cpp

示例7: PRINT1

// -----------------------------------------------------------------------------
// CSendObject::ExistsL
// Check if the file already exists on the storage.
// -----------------------------------------------------------------------------
//
TBool CSendObject::ExistsL( const TDesC& aName ) const
    {
    PRINT1( _L( "MM MTP => CSendObject::Exists aName = %S" ), &aName );
    // This detects both files and folders
    TBool ret( EFalse );
    ret = BaflUtils::FileExists( iFramework.Fs(), aName );

#ifdef MMMTPDP_REPLACE_EXIST_FILE
    if( ret )
        {
        // delete the old one and replace
        TInt delErr = iFramework.Fs().Delete( aName );
        PRINT1( _L( "MM MTP <> CSendObject::Exists delErr = %d" ), delErr );
        // delete from the metadata DB
        TRAPD( err, iFramework.ObjectMgr().RemoveObjectL( aName ) );
        PRINT1( _L( "MM MTP <> CSendObject::Exists err = %d" ), err );
        if( err == KErrNone )
            {
            // do nothing, ignore warning
            }
        // delete from video/mpx DB
        CMTPObjectMetaData* objectInfo = CMTPObjectMetaData::NewLC(); // + objectInfo
        if ( iFramework.ObjectMgr().ObjectL( aName, *objectInfo ) )
            {
            TRAP_IGNORE( iWrapper.DeleteObjectL( aName,
                    objectInfo->Uint( CMTPObjectMetaData::EFormatCode ) ) );
            }
        CleanupStack::PopAndDestroy( objectInfo ); // - objectInfo
        ret = EFalse;
        }
#endif
    PRINT1( _L( "MM MTP <= CSendObject::Exists ret = %d" ), ret );
    return ret;
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:39，代码来源:csendobject.cpp

示例8: PRINT

// -----------------------------------------------------------------------------
// CGetObject::ServiceL
// GetObject request handler
// -----------------------------------------------------------------------------
//
void CGetObject::ServiceL()
    {
    PRINT( _L( "MM MTP => CGetObject::ServiceL" ) );
    
    MmMtpDpUtility::SetPSStatus(EMtpPSStatusActive);

    // Get the objectinfo
    TUint32 objectHandle = Request().Uint32( TMTPTypeRequest::ERequestParameter1 );
    PRINT1( _L( "MM MTP <> CGetObject::ServiceL objectHandle = 0x%x" ), objectHandle );

    // NOTE: shouldn't be deleted in destructor, don't have the ownership
    iObjectInfo = iRequestChecker->GetObjectInfo( objectHandle );

    if ( iObjectInfo != NULL )
        {
        // Get the file
        GetObjectL( iObjectInfo->DesC( CMTPObjectMetaData::ESuid  ) );

        // Send the data (file)
        SendDataL( *iFileObject );
        }
    else
        {
        // The object handle has already been checked, so an invalid handle can
        // only occur if it was invalidated during a context switch between
        // the validation time and now.
        iError = EMTPRespCodeInvalidObjectHandle;
        }

    PRINT1( _L( "MM MTP <= CGetObject::ServiceL iError = 0x%x" ), iError );
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:36，代码来源:cgetobject.cpp

示例9: CacheSize

void CacheSize(TUint aMin, TUint aMax)
	{
	SVMCacheInfo info;
	if (UserSvr::HalFunction(EHalGroupVM,EVMHalGetCacheSize,&info,0) != KErrNone)
		{
		return;
		}
	
	if (aMin > 0 || aMax > 0)
		{
		if (aMin > 0)
			{
			info.iMinSize = aMin;
			}
		if (aMax > 0)
			{
			info.iMaxSize = aMax;
			}
		UserSvr::HalFunction(EHalGroupVM,EVMHalSetCacheSize,(TAny*)info.iMinSize,(TAny*)info.iMaxSize);
		if (UserSvr::HalFunction(EHalGroupVM,EVMHalGetCacheSize,&info,0) != KErrNone)
			{
			return;
			}
		}

	PRINT1(_L("Paging Cache min size %d"),info.iMinSize);
	PRINT1(_L("  max size %d"),info.iMaxSize);
	PRINT1(_L("  current size %d\n"),info.iCurrentSize);
	}

开发者ID:kuailexs，项目名称:symbiandump-os1，代码行数:29，代码来源:t_wdpsoak.cpp

示例10: PRINT

// ----------------------------------------------------------------------------
// C12keyKeyMap::ReadExtraCharacters
// The special chars that are listed in HbKeyboardSctPortrait, but not in
// HbKeyboardVirtual12Key, are mapped to key-* except the hardcoded characters
// "+*#".
// ----------------------------------------------------------------------------
TInt C12keyKeyMap::ReadExtraCharacters(const HbInputLanguage& aLanguage)
	{
	PRINT(_L("C12keyKeyMap::ReadExtraCharacters"));

	TInt count(0); // How many new keys have been mapped

#if defined(NEW_KEYMAP_FACTORY_API)
	// Takes ownership
	QScopedPointer<const HbKeymap> keymap(
		HbKeymapFactory::instance()->keymap(aLanguage, HbKeymapFactory::NoCaching));
#else
	const HbKeymap* keymap =
		HbKeymapFactory::instance()->keymap(aLanguage, HbKeymapFactory::Default);
#endif

	if (keymap)
		{
		TInt i(0);
		const HbMappedKey* mappedKey = keymap->keyForIndex(HbKeyboardSctPortrait, i);
		while (mappedKey)
			{
			AddNewKeyToMap(EKeyStar, mappedKey->characters(HbModifierNone), count);
			mappedKey = keymap->keyForIndex(HbKeyboardSctPortrait, ++i);
			}
		}
	else
		{
		PRINT1(_L("no keymap for language %d"), aLanguage.language());
		}

    PRINT1(_L("End C12keyKeyMap::ReadExtraCharacters added %d chars"), count);
	return count;
	}

开发者ID:bavanisp，项目名称:qtmobility-1.1.0，代码行数:39，代码来源:c12keykeymap.cpp

示例11: TRAPD

// ----------------------------------------------------------------------------
// CCsServer::RefreshConversations
// Refresh conversations.
// ----------------------------------------------------------------------------
void CCsServer::RefreshConversations()
{
    // NOTE:- NO CHECK DONE NOW ON NUMBER OF PLUGINS TO KEEP IT SIMPLE.
    // NOT EXPECTED TO BE MORE THAN 1 PLUGIN FOR TB 9.2.

    // Delete and recreate cache.
    if (iConversationCache)
    {
        delete iConversationCache;
        iConversationCache = NULL;

        iCsCachingStatus = KCachingStatusUnknown;
        TRAPD(error, iConversationCache = CCsConversationCache::
                NewL(iContactsManager, this));
        if (error != KErrNone)
        {
            PRINT1 ( _L("CCsServer::RefreshConversations - Error:%d"), error );
        }
    }

    // Notify client to refresh
    NotifySessions(NULL, KConversationEventRefresh);
    NotifySessions(NULL, KConversationEventListRefresh);
    // Read again.
    TRAPD(error, iConversationPlugin->GetConversationsL());
    if (error != KErrNone)
    {
        PRINT1 ( _L("CCsServer::RefreshConversations - Error:%d"), error );
    }
}

开发者ID:cdaffara，项目名称:symbiandump-ossapps，代码行数:34，代码来源:ccsserver.cpp

示例12: CHOLMOD

int CHOLMOD(reallocate_factor)
(
    /* ---- input ---- */
    size_t nznew,	/* new # of entries in L */
    /* ---- in/out --- */
    cholmod_factor *L,	/* factor to modify */
    /* --------------- */
    cholmod_common *Common
)
{
    /* ---------------------------------------------------------------------- */
    /* get inputs */
    /* ---------------------------------------------------------------------- */

    RETURN_IF_NULL_COMMON (FALSE) ;
    RETURN_IF_NULL (L, FALSE) ;
    RETURN_IF_XTYPE_INVALID (L, CHOLMOD_REAL, CHOLMOD_ZOMPLEX, FALSE) ;
    PRINT1 (("realloc factor: xtype %d\n", L->xtype)) ;
    if (L->is_super)
    {
	/* L must be simplicial, and not symbolic */
	ERROR (CHOLMOD_INVALID, "L invalid") ;
	return (FALSE) ;
    }
    Common->status = CHOLMOD_OK ;
    PRINT1 (("realloc factor %g to %g\n", (double) L->nzmax, (double) nznew)) ;

    /* ---------------------------------------------------------------------- */
    /* resize (or allocate) the L->i and L->x components of the factor */
    /* ---------------------------------------------------------------------- */

    CHOLMOD(realloc_multiple) (nznew, 1, L->xtype, &(L->i), NULL,
	    &(L->x), &(L->z), &(L->nzmax), Common) ;
    return (Common->status == CHOLMOD_OK) ;
}

开发者ID:Al-th，项目名称:matlab，代码行数:35，代码来源:cholmod_factor.c

示例13: PRINT

TBool CPredictiveSearchSynchronizer::ReadMailAddressesL(CContactItem& aContact)
	{
	PRINT(_L("CPredictiveSearchSynchronizer::ReadMailAddressesL"));

	// SELECT value FROM comm_addr
	//	 WHERE contact_id = [contact id value] AND type = [type value];
    _LIT(KSelectMailAddrFormat, "SELECT %S FROM %S WHERE %S = %d AND %S = %d;");
	const TInt KContactIdLength = 10;
	const TInt KCommAddrTypeLength = 2; // CPplCommAddrTable::EEmailAddress is enum
	TInt bufSize = KSelectMailAddrFormat().Length() +
				   KCommAddrValue().Length() +
				   KSqlContactCommAddrTableName().Length() +
				   KCommAddrContactId().Length() +
				   KContactIdLength +
				   KCommAddrType().Length() +
				   KCommAddrTypeLength;
	HBufC* sqlStatement = HBufC::NewLC(bufSize);
	sqlStatement->Des().AppendFormat(KSelectMailAddrFormat,
		&KCommAddrValue,
		&KSqlContactCommAddrTableName,
		&KCommAddrContactId,
		aContact.Id(),
		&KCommAddrType,
		CPplCommAddrTable::EEmailAddress);

	RSqlStatement stmnt;
	CleanupClosePushL(stmnt);
	PRINT1(_L("prepare SQL statement:%S"), sqlStatement);
    stmnt.PrepareL(iDatabase, *sqlStatement);

	const TInt KValueIndex = 0;
	TBool foundMailAddress(EFalse);
	TInt err(KErrNone);
    while ((err = stmnt.Next()) == KSqlAtRow)
        {
		TPtrC value;
		if (stmnt.ColumnText(KValueIndex, value) == KErrNone)
			{
			PRINT2(_L("  id=%d, found mail address=%S"), aContact.Id(), &value);
			CContactItemField* field =
				CContactItemField::NewLC(KStorageTypeText, KUidContactFieldEMail);
			CContactTextField* textfield = field->TextStorage();
			textfield->SetTextL(value);
			aContact.AddFieldL(*field); // Takes ownership
			CleanupStack::Pop(field);
			foundMailAddress = ETrue;
			}
        }

    if (err != KSqlAtEnd)
        {
		PRINT1(_L("CPredictiveSearchSynchronizer::ReadMailAddressesL SQL err=%d"), err);
        User::Leave(err);
        }
    CleanupStack::PopAndDestroy(&stmnt);
	CleanupStack::PopAndDestroy(sqlStatement);
	PRINT1(_L("CPredictiveSearchSynchronizer::ReadMailAddressesL return %d"), foundMailAddress);
	return foundMailAddress;
	}

开发者ID:bavanisp，项目名称:qtmobility-1.1.0，代码行数:59，代码来源:cpredictivesearchsynchronizer.cpp

示例14: cc_process_volume_usage

static void
cc_process_volume_usage(struct hid_appcol *ha, struct hid_report *hr, int value)
{
	struct hid_interface *hi;
	struct hid_field *hf;
	int i, flags, total;
	struct hid_key keycodes[MAX_KEYCODE];
	uint16_t key;

	/*
	 * HUG_VOLUME has Usage Type LC (linear control). Usually it has
	 * value range [-Min, Max]. Positive value n increments the volume
	 * by n. Negative value -n decrements the volumn by n. To fit in
	 * our key press/release model, HUG_VOLUME is simulated by
	 * pressing/releasing HUG_VOLUME_UP or HUG_VLOLUME_DOWN n times.
	 */

	hi = hid_appcol_get_parser_private(ha);
	assert(hi != NULL);

	/* Do nothing if value is 0. */
	if (value == 0)
		return;

	/* The keyboard driver needs to know the total number of keys. */
	total = 0;
	hf = NULL;
	while ((hf = hid_report_get_next_field(hr, hf, HID_INPUT)) != NULL) {
		flags = hid_field_get_flags(hf);
		if (flags & HIO_CONST)
			continue;
		for (i = 0; i < hf->hf_count; i++)
			total++;
	}
	if (total >= MAX_KEYCODE)
		return;

	if (value < 0)
		key = HUG_VOLUME_DOWN;
	else
		key = HUG_VOLUME_UP;
	value = abs(value);

	memset(keycodes, 0, sizeof(keycodes));
	for (i = 0; i < value; i++) {
		/* Key press. */
		keycodes[0].code = key;
		keycodes[0].up = HUP_CONSUMER;
		kbd_input(ha, 0, keycodes, total);
		if (verbose > 1)
			PRINT1("hid codes: 0x%02X (HUG_VOLUME)\n",
			    keycodes[0].code);
		/* Key release. */
		keycodes[0].code = 0;
		kbd_input(ha, 0, keycodes, total);
		if (verbose > 1)
			PRINT1("hid codes: none (HUG_VOLUME)\n");
	}
}

开发者ID:HenryHu，项目名称:uhidd，代码行数:59，代码来源:uhidd_cc.c

示例15: PRINT

// ---------------------------------------------------------------------------
// CMmMtpDpMetadataAccessWrapper::GetObjectMetadataValueL
// Gets a piece of metadata from the collection
// ---------------------------------------------------------------------------
//
EXPORT_C void CMmMtpDpMetadataAccessWrapper::GetObjectMetadataValueL( const TUint16 aPropCode,
    MMTPType& aNewData,
    const CMTPObjectMetaData& aObjectMetaData )
    {
    PRINT( _L( "MM MTP => CMmMtpDpMetadataAccessWrapper::GetObjectMetadataValueL" ) );

    TMPXGeneralCategory category = Category( aObjectMetaData );
    switch ( category )
        {
        case EMPXAbstractAlbum:
            if ( aPropCode == EMTPObjectPropCodeDateAdded && EMTPTypeString == aNewData.Type() )
                {
                TBuf<KMtpMaxDateTimeStringLength> timeStr;
                MmMtpDpUtility::GetObjectDateModifiedL( iFs,
                    aObjectMetaData.DesC( CMTPObjectMetaData::ESuid ),
                    timeStr );
                PRINT1( _L( "MM MTP <> CGetObjectPropList::ServiceOneObjectPropertyL Date time %S" ), &timeStr );

                ( ( CMTPTypeString & ) aNewData ).SetL( timeStr );
                break;
                }
            // else
            // Fall through on purpoe to get from mpx
        case EMPXPlaylist:
        case EMPXSong:
            {
            iMmMtpDpMetadataMpxAccess->GetObjectMetadataValueL( aPropCode,
                aNewData,
                aObjectMetaData.DesC( CMTPObjectMetaData::ESuid ),
                category );
            }
            break;
        case EMPXVideo:
            if ( aPropCode == EMTPObjectPropCodeDateAdded && EMTPTypeString == aNewData.Type() )
                {
                TBuf<KMtpMaxDateTimeStringLength> timeStr;
                MmMtpDpUtility::GetObjectDateModifiedL( iFs,
                    aObjectMetaData.DesC( CMTPObjectMetaData::ESuid ),
                    timeStr );
                PRINT1( _L( "MM MTP <> CGetObjectPropList::ServiceOneObjectPropertyL Date time %S" ), &timeStr );

                ( ( CMTPTypeString & ) aNewData ).SetL( timeStr );
                }
            else
                {
                iMmMtpDpMetadataVideoAccess->GetObjectMetadataValueL( aPropCode,
                    aNewData,
                    aObjectMetaData );
                }
            break;
        default:
            // do nothing
            break;
        }

    PRINT( _L( "MM MTP <= CMmMtpDpMetadataAccessWrapper::GetObjectMetadataValueL" ) );
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:62，代码来源:cmmmtpdpmetadataaccesswrapper.cpp

示例16: CreateChunk

void CreateChunk(RChunk * aChunk, TUint aSize)
	{
	TESTNEXT(_L("Creating a paged chunk"));
	TChunkCreateInfo createInfo;
	PRINT1(_L("Creating chunk size 0x%08X bytes "),aSize);
	PRINT1(_L("at index %d\n"),gNextChunk);
	createInfo.SetPaging(TChunkCreateInfo::EPaged);
	createInfo.SetNormal(aSize,aSize);
	test_KErrNone(aChunk->Create(createInfo));
	}

开发者ID:kuailexs，项目名称:symbiandump-os1，代码行数:10，代码来源:t_wdpsoak.cpp

示例17: switch

// -----------------------------------------------------------------------------
// CMediaMtpDataProvider::Supported
// Defines the supported operations and formats of the data provider
// -----------------------------------------------------------------------------
//
void CMediaMtpDataProvider::Supported( TMTPSupportCategory aCategory,
    RArray<TUint>& aArray ) const
    {
    switch ( aCategory )
        {
        case EEvents:
            break;

        case EObjectCaptureFormats:
        case EObjectPlaybackFormats:
            {
            TInt count = sizeof( KMediaMtpDataProviderSupportedFormats ) / sizeof( TUint16 );
            for ( TInt i = 0; i < count; i++ )
                {
                aArray.Append( KMediaMtpDataProviderSupportedFormats[i] );
                }
            PRINT1( _L( "MM MTP <> CMediaMtpDataProvider::Supported format count = %d" ), count );
            }
            break;

        case EOperations:
            {
            TInt count = sizeof( KMediaMtpDataProviderSupportedOperations ) / sizeof( TUint16 );

            for ( TInt i = 0; i < count; i++ )
                {
                aArray.Append( KMediaMtpDataProviderSupportedOperations[i] );
                }
            PRINT1( _L( "MM MTP <> CMediaMtpDataProvider::Supported operation count = %d" ), count );
            }
            break;

        case EObjectProperties:
            {
            TInt count = iSupportedPropAll.Count();

            for ( TInt i = 0; i < count; i++ )
                {
                aArray.Append( iSupportedPropAll[i] );
                }
            PRINT1( _L( "MM MTP <> CMediaMtpDataProvider::Supported properties count = %d" ), aArray.Count() );
            }
            break;

        case EStorageSystemTypes:
            {
            aArray.Append( CMTPStorageMetaData::ESystemTypeDefaultFileSystem );
            }
            break;

        default:
            // Unrecognised category, leave aArray unmodified.
            break;
        }
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:60，代码来源:cmediamtpdataprovider.cpp

示例18: Request

// -----------------------------------------------------------------------------
// CSendObject::MatchStoreAndParentL
// -----------------------------------------------------------------------------
//
TMTPResponseCode CSendObject::MatchStoreAndParentL()
    {
    TMTPResponseCode responseCode = EMTPRespCodeOK;

    iStorageId = Request().Uint32( TMTPTypeRequest::ERequestParameter1 );
    iParentHandle = Request().Uint32( TMTPTypeRequest::ERequestParameter2 );
    PRINT2( _L( "MM MTP <> CSendObject::MatchStoreAndParentL, iStorageId = 0x%x, iParentHandle = 0x%x" ),
        iStorageId,
        iParentHandle );

    if ( iStorageId == KMTPStorageDefault )
        {
        iStorageId = iDpConfig.GetDefaultStorageIdL();
        PRINT1( _L( "MM MTP <> CSendObject::GetDefaultStorageIdL, iStorageId = 0x%x" ), iStorageId );
        }

    delete iParentSuid;
    iParentSuid = NULL;

    if( iParentHandle == KMTPHandleNone )   // parentHandle is not used by initiator, set it to root
        {
        iParentHandle = KMTPHandleAll;
        }
    if ( iParentHandle == KMTPHandleAll )   // According to spec, KMTPHandleAll means initiator wish to place in the root
        {
        PRINT( _L( "MM MTP <> CSendObject::MatchStoreAndParentL, iParentSuid = KMTPHandleAll" ) );
        iParentSuid = iFramework.StorageMgr().StorageL( iStorageId ).DesC( CMTPStorageMetaData::EStorageSuid ).AllocL();
        PRINT1( _L( "MM MTP <> CSendObject::MatchStoreAndParentL, iParentSuid = %S" ), iParentSuid );
        }
    else    // parentHandle is specified by initiator
        {
        // does not take owernship
        CMTPObjectMetaData* parentObjInfo = iRequestChecker->GetObjectInfo( iParentHandle );
        __ASSERT_DEBUG( parentObjInfo, Panic( EMmMTPDpObjectNull ) );

        if ( parentObjInfo->Uint( CMTPObjectMetaData::EStorageId ) != iStorageId )
            {
            responseCode = EMTPRespCodeInvalidObjectHandle;
            PRINT( _L( "MM MTP <> CSendObject::MatchStoreAndParentL, STORAGEID DOES NOT MATCH WITH PARENTHANDLE!" ) );
            }
        else
            {
            iParentSuid = parentObjInfo->DesC( CMTPObjectMetaData::ESuid ).AllocL();
            }
        }
    PRINT1( _L( "MM MTP <> CSendObject::MatchStoreAndParentL, iParentSuid = %S" ), iParentSuid );

    if ( ( responseCode == EMTPRespCodeOK ) && !BaflUtils::PathExists( iFramework.Fs(), *iParentSuid ) )
        {
        responseCode = EMTPRespCodeInvalidDataset;
        }

    return responseCode;
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:58，代码来源:csendobject.cpp

示例19: PRINT1

// -----------------------------------------------------------------------------
// CMmMtpDpMetadataAccessWrapper::DeleteDummyFile
// Delete one dummy file from dummy files array
// -----------------------------------------------------------------------------
//
EXPORT_C void CMmMtpDpMetadataAccessWrapper::DeleteDummyFile( const TDesC& aDummyFileName )
    {
    PRINT1( _L( "MM MTP <> CMmMtpDpMetadataAccessWrapper::DeleteDummyFile aDummyFileName(%S)" ), &aDummyFileName );
    TInt pos = 0;
    if ( iAbstractMediaArray->Count() > 0 )
        {
        if ( 0 == iAbstractMediaArray->Find( aDummyFileName, pos ) )
            {
            PRINT1( _L( "MM MTP <> CMmMtpDpMetadataAccessWrapper::DeleteDummyFile pos = %d" ), pos );
            iAbstractMediaArray->Delete( pos );
            }
        }
    }

开发者ID:cdaffara，项目名称:symbiandump-mw2，代码行数:18，代码来源:cmmmtpdpmetadataaccesswrapper.cpp

示例20: assert

void ThreadedAudioDevice::waitForThread(int waitMs)
{
	if (!isPassive()) {
		assert(_thread != 0);	// should not get called again!
		PRINT1("ThreadedAudioDevice::waitForThread: waiting for thread to finish\n");
		if (pthread_join(_thread, NULL) == -1) {
			PRINT0("ThreadedAudioDevice::doStop: terminating thread!\n");
			// JWM: pthread_cancel is not available in Android
			//pthread_cancel(_thread);
			//_thread = 0;
		}
		PRINT1("\tThreadedAudioDevice::waitForThread: thread done\n");
	}
}

开发者ID:eriser，项目名称:rtcmix-android，代码行数:14，代码来源:ThreadedAudioDevice.cpp

注：本文中的PRINT1函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PRINT6ADDR函数代码示例发布时间：2022-05-30

C++ PRINT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19274|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10014|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8341|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8709|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8655|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9684|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8643|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8011|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8680|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7547|2022-11-06

客服电话

电子邮件

C++ PRINT1函数代码示例

示例1: PRINT

示例2: main

示例3: defined

示例4: PRINT1

示例5: PRINT1

示例6: PRINT

示例7: PRINT1

示例8: PRINT

示例9: CacheSize

示例10: PRINT

示例11: TRAPD

示例12: CHOLMOD

示例13: PRINT

示例14: cc_process_volume_usage

示例15: PRINT

示例16: CreateChunk

示例17: switch

示例18: Request

示例19: PRINT1

示例20: assert

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

CVE-2022-36321

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053