本文整理汇总了C++中PNG_ROWBYTES函数的典型用法代码示例。如果您正苦于以下问题：C++ PNG_ROWBYTES函数的具体用法？C++ PNG_ROWBYTES怎么用？C++ PNG_ROWBYTES使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了PNG_ROWBYTES函数的11个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: png_set_IHDR
void PNGAPI
png_set_IHDR(png_const_structrp png_ptr, png_inforp info_ptr,
png_uint_32 width, png_uint_32 height, int bit_depth,
int color_type, int interlace_type, int compression_type,
int filter_type)
{
png_debug1(1, "in %s storage function", "IHDR");
if (png_ptr == NULL || info_ptr == NULL)
return;
info_ptr->width = width;
info_ptr->height = height;
info_ptr->bit_depth = (png_byte)bit_depth;
info_ptr->color_type = (png_byte)color_type;
info_ptr->compression_type = (png_byte)compression_type;
info_ptr->filter_type = (png_byte)filter_type;
info_ptr->interlace_type = (png_byte)interlace_type;
png_check_IHDR (png_ptr, info_ptr->width, info_ptr->height,
info_ptr->bit_depth, info_ptr->color_type, info_ptr->interlace_type,
info_ptr->compression_type, info_ptr->filter_type);
if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE)
info_ptr->channels = 1;
else if ((info_ptr->color_type & PNG_COLOR_MASK_COLOR) != 0)
info_ptr->channels = 3;
else
info_ptr->channels = 1;
if ((info_ptr->color_type & PNG_COLOR_MASK_ALPHA) != 0)
info_ptr->channels++;
info_ptr->pixel_depth = (png_byte)(info_ptr->channels * info_ptr->bit_depth);
info_ptr->rowbytes = PNG_ROWBYTES(info_ptr->pixel_depth, width);
}
开发者ID:15521054523，项目名称:fis3，代码行数:39，代码来源:pngset.c
示例2: png_read_row
//.........这里部分代码省略.........
png_read_finish_row(png_ptr);
return;
}
break;
case 5:
if ((png_ptr->row_number & 1) || png_ptr->width < 2)
{
if (dsp_row != NULL)
png_combine_row(png_ptr, dsp_row,
png_pass_dsp_mask[png_ptr->pass]);
png_read_finish_row(png_ptr);
return;
}
break;
default:
case 6:
if (!(png_ptr->row_number & 1))
{
png_read_finish_row(png_ptr);
return;
}
break;
}
}
#endif
if (!(png_ptr->mode & PNG_HAVE_IDAT))
png_error(png_ptr, "Invalid attempt to read row data");
png_ptr->zstream.next_out = png_ptr->row_buf;
png_ptr->zstream.avail_out =
(uInt)(PNG_ROWBYTES(png_ptr->pixel_depth,
png_ptr->iwidth) + 1);
do
{
if (!(png_ptr->zstream.avail_in))
{
while (!png_ptr->idat_size)
{
png_crc_finish(png_ptr, 0);
png_ptr->idat_size = png_read_chunk_header(png_ptr);
if (png_memcmp(png_ptr->chunk_name, png_IDAT, 4))
png_error(png_ptr, "Not enough image data");
}
png_ptr->zstream.avail_in = (uInt)png_ptr->zbuf_size;
png_ptr->zstream.next_in = png_ptr->zbuf;
if (png_ptr->zbuf_size > png_ptr->idat_size)
png_ptr->zstream.avail_in = (uInt)png_ptr->idat_size;
png_crc_read(png_ptr, png_ptr->zbuf,
(png_size_t)png_ptr->zstream.avail_in);
png_ptr->idat_size -= png_ptr->zstream.avail_in;
}
ret = inflate(&png_ptr->zstream, Z_PARTIAL_FLUSH);
if (ret == Z_STREAM_END)
{
if (png_ptr->zstream.avail_out || png_ptr->zstream.avail_in ||
png_ptr->idat_size)
png_benign_error(png_ptr, "Extra compressed data");
png_ptr->mode |= PNG_AFTER_IDAT;
png_ptr->flags |= PNG_FLAG_ZLIB_FINISHED;
break;
}
if (ret != Z_OK)
开发者ID:136446529，项目名称:Tiny-Wings-Remake-on-Android，代码行数:67，代码来源:pngread.c
示例3: png_read_push_finish_row
void /* PRIVATE */
png_read_push_finish_row(png_structp png_ptr)
{
#ifdef PNG_USE_LOCAL_ARRAYS
/* arrays to facilitate easy interlacing - use pass (0 - 6) as index */
/* start of interlace block */
PNG_CONST int FARDATA png_pass_start[] = {0, 4, 0, 2, 0, 1, 0};
/* offset to next interlace block */
PNG_CONST int FARDATA png_pass_inc[] = {8, 8, 4, 4, 2, 2, 1};
/* start of interlace block in the y direction */
PNG_CONST int FARDATA png_pass_ystart[] = {0, 0, 4, 0, 2, 0, 1};
/* offset to next interlace block in the y direction */
PNG_CONST int FARDATA png_pass_yinc[] = {8, 8, 8, 4, 4, 2, 2};
/* Height of interlace block. This is not currently used - if you need
* it, uncomment it here and in png.h
PNG_CONST int FARDATA png_pass_height[] = {8, 8, 4, 4, 2, 2, 1};
*/
#endif
png_ptr->row_number++;
if (png_ptr->row_number < png_ptr->num_rows)
return;
if (png_ptr->interlaced)
{
png_ptr->row_number = 0;
png_memset_check(png_ptr, png_ptr->prev_row, 0,
png_ptr->rowbytes + 1);
do
{
png_ptr->pass++;
if ((png_ptr->pass == 1 && png_ptr->width < 5) ||
(png_ptr->pass == 3 && png_ptr->width < 3) ||
(png_ptr->pass == 5 && png_ptr->width < 2))
png_ptr->pass++;
if (png_ptr->pass > 7)
png_ptr->pass--;
if (png_ptr->pass >= 7)
break;
png_ptr->iwidth = (png_ptr->width +
png_pass_inc[png_ptr->pass] - 1 -
png_pass_start[png_ptr->pass]) /
png_pass_inc[png_ptr->pass];
png_ptr->irowbytes = PNG_ROWBYTES(png_ptr->pixel_depth,
png_ptr->iwidth) + 1;
if (png_ptr->transformations & PNG_INTERLACE)
break;
png_ptr->num_rows = (png_ptr->height +
png_pass_yinc[png_ptr->pass] - 1 -
png_pass_ystart[png_ptr->pass]) /
png_pass_yinc[png_ptr->pass];
} while (png_ptr->iwidth == 0 || png_ptr->num_rows == 0);
}
}
开发者ID:AGenews，项目名称:GUI，代码行数:65，代码来源:pngpread.c
示例4: png_push_process_row
void /* PRIVATE */
png_push_process_row(png_structp png_ptr)
{
png_ptr->row_info.color_type = png_ptr->color_type;
png_ptr->row_info.width = png_ptr->iwidth;
png_ptr->row_info.channels = png_ptr->channels;
png_ptr->row_info.bit_depth = png_ptr->bit_depth;
png_ptr->row_info.pixel_depth = png_ptr->pixel_depth;
png_ptr->row_info.rowbytes = PNG_ROWBYTES(png_ptr->row_info.pixel_depth,
png_ptr->row_info.width);
png_read_filter_row(png_ptr, &(png_ptr->row_info),
png_ptr->row_buf + 1, png_ptr->prev_row + 1,
(int)(png_ptr->row_buf[0]));
png_memcpy_check(png_ptr, png_ptr->prev_row, png_ptr->row_buf,
png_ptr->rowbytes + 1);
if (png_ptr->transformations || (png_ptr->flags&PNG_FLAG_STRIP_ALPHA))
png_do_read_transformations(png_ptr);
#if defined(PNG_READ_INTERLACING_SUPPORTED)
/* blow up interlaced rows to full size */
if (png_ptr->interlaced && (png_ptr->transformations & PNG_INTERLACE))
{
if (png_ptr->pass < 6)
/* old interface (pre-1.0.9):
png_do_read_interlace(&(png_ptr->row_info),
png_ptr->row_buf + 1, png_ptr->pass, png_ptr->transformations);
*/
png_do_read_interlace(png_ptr);
switch (png_ptr->pass)
{
case 0:
{
int i;
for (i = 0; i < 8 && png_ptr->pass == 0; i++)
{
png_push_have_row(png_ptr, png_ptr->row_buf + 1);
png_read_push_finish_row(png_ptr); /* updates png_ptr->pass */
}
if (png_ptr->pass == 2) /* pass 1 might be empty */
{
for (i = 0; i < 4 && png_ptr->pass == 2; i++)
{
png_push_have_row(png_ptr, png_bytep_NULL);
png_read_push_finish_row(png_ptr);
}
}
if (png_ptr->pass == 4 && png_ptr->height <= 4)
{
for (i = 0; i < 2 && png_ptr->pass == 4; i++)
{
png_push_have_row(png_ptr, png_bytep_NULL);
png_read_push_finish_row(png_ptr);
}
}
if (png_ptr->pass == 6 && png_ptr->height <= 4)
{
png_push_have_row(png_ptr, png_bytep_NULL);
png_read_push_finish_row(png_ptr);
}
break;
}
case 1:
{
int i;
for (i = 0; i < 8 && png_ptr->pass == 1; i++)
{
png_push_have_row(png_ptr, png_ptr->row_buf + 1);
png_read_push_finish_row(png_ptr);
}
if (png_ptr->pass == 2) /* skip top 4 generated rows */
{
for (i = 0; i < 4 && png_ptr->pass == 2; i++)
{
png_push_have_row(png_ptr, png_bytep_NULL);
png_read_push_finish_row(png_ptr);
}
}
break;
}
case 2:
{
int i;
for (i = 0; i < 4 && png_ptr->pass == 2; i++)
{
png_push_have_row(png_ptr, png_ptr->row_buf + 1);
png_read_push_finish_row(png_ptr);
}
for (i = 0; i < 4 && png_ptr->pass == 2; i++)
{
png_push_have_row(png_ptr, png_bytep_NULL);
png_read_push_finish_row(png_ptr);
}
if (png_ptr->pass == 4) /* pass 3 might be empty */
{
for (i = 0; i < 2 && png_ptr->pass == 4; i++)
//.........这里部分代码省略.........
开发者ID:AGenews，项目名称:GUI，代码行数:101，代码来源:pngpread.c
示例5: png_push_read_chunk
//.........这里部分代码省略.........
}
png_handle_PLTE(png_ptr, info_ptr, png_ptr->push_length);
}
else if (!png_memcmp(png_ptr->chunk_name, png_IDAT, 4))
{
/* If we reach an IDAT chunk, this means we have read all of the
* header chunks, and we can start reading the image (or if this
* is called after the image has been read - we have an error).
*/
if (!(png_ptr->mode & PNG_HAVE_IHDR))
png_error(png_ptr, "Missing IHDR before IDAT");
else if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE &&
!(png_ptr->mode & PNG_HAVE_PLTE))
png_error(png_ptr, "Missing PLTE before IDAT");
if (png_ptr->mode & PNG_HAVE_IDAT)
{
if (!(png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT))
if (png_ptr->push_length == 0)
return;
if (png_ptr->mode & PNG_AFTER_IDAT)
png_error(png_ptr, "Too many IDAT's found");
}
png_ptr->idat_size = png_ptr->push_length;
png_ptr->mode |= PNG_HAVE_IDAT;
png_ptr->process_mode = PNG_READ_IDAT_MODE;
png_push_have_info(png_ptr, info_ptr);
png_ptr->zstream.avail_out =
(uInt) PNG_ROWBYTES(png_ptr->pixel_depth,
png_ptr->iwidth) + 1;
png_ptr->zstream.next_out = png_ptr->row_buf;
return;
}
#ifdef PNG_READ_gAMA_SUPPORTED
else if (!png_memcmp(png_ptr->chunk_name, png_gAMA, 4))
{
if (png_ptr->push_length + 4 > png_ptr->buffer_size)
{
png_push_save_buffer(png_ptr);
return;
}
png_handle_gAMA(png_ptr, info_ptr, png_ptr->push_length);
}
#endif
#ifdef PNG_READ_sBIT_SUPPORTED
else if (!png_memcmp(png_ptr->chunk_name, png_sBIT, 4))
{
if (png_ptr->push_length + 4 > png_ptr->buffer_size)
{
png_push_save_buffer(png_ptr);
return;
}
png_handle_sBIT(png_ptr, info_ptr, png_ptr->push_length);
}
#endif
#ifdef PNG_READ_cHRM_SUPPORTED
开发者ID:111111111，项目名称:AROMA-Installer，代码行数:67，代码来源:pngpread.c
示例6: png_process_IDAT_data
void /* PRIVATE */
png_process_IDAT_data(png_structp png_ptr, png_bytep buffer,
png_size_t buffer_length)
{
/* The caller checks for a non-zero buffer length. */
if (!(buffer_length > 0) || buffer == NULL)
png_error(png_ptr, "No IDAT data (internal error)");
/* This routine must process all the data it has been given
* before returning, calling the row callback as required to
* handle the uncompressed results.
*/
png_ptr->zstream.next_in = buffer;
png_ptr->zstream.avail_in = (uInt)buffer_length;
/* Keep going until the decompressed data is all processed
* or the stream marked as finished.
*/
while (png_ptr->zstream.avail_in > 0 &&
!(png_ptr->flags & PNG_FLAG_ZLIB_FINISHED))
{
int ret;
/* We have data for zlib, but we must check that zlib
* has somewhere to put the results. It doesn't matter
* if we don't expect any results -- it may be the input
* data is just the LZ end code.
*/
if (!(png_ptr->zstream.avail_out > 0))
{
png_ptr->zstream.avail_out =
(uInt) PNG_ROWBYTES(png_ptr->pixel_depth,
png_ptr->iwidth) + 1;
png_ptr->zstream.next_out = png_ptr->row_buf;
}
/* Using Z_SYNC_FLUSH here means that an unterminated
* LZ stream can still be handled (a stream with a missing
* end code), otherwise (Z_NO_FLUSH) a future zlib
* implementation might defer output and, therefore,
* change the current behavior. (See comments in inflate.c
* for why this doesn't happen at present with zlib 1.2.5.)
*/
ret = inflate(&png_ptr->zstream, Z_SYNC_FLUSH);
/* Check for any failure before proceeding. */
if (ret != Z_OK && ret != Z_STREAM_END)
{
/* Terminate the decompression. */
png_ptr->flags |= PNG_FLAG_ZLIB_FINISHED;
/* This may be a truncated stream (missing or
* damaged end code). Treat that as a warning.
*/
if (png_ptr->row_number >= png_ptr->num_rows ||
png_ptr->pass > 6)
png_warning(png_ptr, "Truncated compressed data in IDAT");
else
png_error(png_ptr, "Decompression error in IDAT");
/* Skip the check on unprocessed input */
return;
}
/* Did inflate output any data? */
if (png_ptr->zstream.next_out != png_ptr->row_buf)
{
/* Is this unexpected data after the last row?
* If it is, artificially terminate the LZ output
* here.
*/
if (png_ptr->row_number >= png_ptr->num_rows ||
png_ptr->pass > 6)
{
/* Extra data. */
png_warning(png_ptr, "Extra compressed data in IDAT");
png_ptr->flags |= PNG_FLAG_ZLIB_FINISHED;
/* Do no more processing; skip the unprocessed
* input check below.
*/
return;
}
/* Do we have a complete row? */
if (png_ptr->zstream.avail_out == 0)
png_push_process_row(png_ptr);
}
/* And check for the end of the stream. */
if (ret == Z_STREAM_END)
png_ptr->flags |= PNG_FLAG_ZLIB_FINISHED;
}
/* All the data should have been processed, if anything
* is left at this point we have bytes of IDAT data
* after the zlib end code.
*/
if (png_ptr->zstream.avail_in > 0)
png_warning(png_ptr, "Extra compression data");
}
开发者ID:111111111，项目名称:AROMA-Installer，代码行数:100，代码来源:pngpread.c
示例7: png_push_process_row
void /* PRIVATE */
png_push_process_row(png_structrp png_ptr)
{
/* 1.5.6: row_info moved out of png_struct to a local here. */
png_row_info row_info;
row_info.width = png_ptr->iwidth; /* NOTE: width of current interlaced row */
row_info.color_type = png_ptr->color_type;
row_info.bit_depth = png_ptr->bit_depth;
row_info.channels = png_ptr->channels;
row_info.pixel_depth = png_ptr->pixel_depth;
row_info.rowbytes = PNG_ROWBYTES(row_info.pixel_depth, row_info.width);
if (png_ptr->row_buf[0] > PNG_FILTER_VALUE_NONE)
{
if (png_ptr->row_buf[0] < PNG_FILTER_VALUE_LAST)
png_read_filter_row(png_ptr, &row_info, png_ptr->row_buf + 1,
png_ptr->prev_row + 1, png_ptr->row_buf[0]);
else
png_error(png_ptr, "bad adaptive filter value");
}
/* libpng 1.5.6: the following line was copying png_ptr->rowbytes before
* 1.5.6, while the buffer really is this big in current versions of libpng
* it may not be in the future, so this was changed just to copy the
* interlaced row count:
*/
memcpy(png_ptr->prev_row, png_ptr->row_buf, row_info.rowbytes + 1);
#ifdef PNG_READ_TRANSFORMS_SUPPORTED
if (png_ptr->transformations != 0)
png_do_read_transformations(png_ptr, &row_info);
#endif
/* The transformed pixel depth should match the depth now in row_info. */
if (png_ptr->transformed_pixel_depth == 0)
{
png_ptr->transformed_pixel_depth = row_info.pixel_depth;
if (row_info.pixel_depth > png_ptr->maximum_pixel_depth)
png_error(png_ptr, "progressive row overflow");
}
else if (png_ptr->transformed_pixel_depth != row_info.pixel_depth)
png_error(png_ptr, "internal progressive row size calculation error");
#ifdef PNG_READ_INTERLACING_SUPPORTED
/* Expand interlaced rows to full size */
if (png_ptr->interlaced != 0 &&
(png_ptr->transformations & PNG_INTERLACE) != 0)
{
if (png_ptr->pass < 6)
png_do_read_interlace(&row_info, png_ptr->row_buf + 1, png_ptr->pass,
png_ptr->transformations);
switch (png_ptr->pass)
{
case 0:
{
int i;
for (i = 0; i < 8 && png_ptr->pass == 0; i++)
{
png_push_have_row(png_ptr, png_ptr->row_buf + 1);
png_read_push_finish_row(png_ptr); /* Updates png_ptr->pass */
}
if (png_ptr->pass == 2) /* Pass 1 might be empty */
{
for (i = 0; i < 4 && png_ptr->pass == 2; i++)
{
png_push_have_row(png_ptr, NULL);
png_read_push_finish_row(png_ptr);
}
}
if (png_ptr->pass == 4 && png_ptr->height <= 4)
{
for (i = 0; i < 2 && png_ptr->pass == 4; i++)
{
png_push_have_row(png_ptr, NULL);
png_read_push_finish_row(png_ptr);
}
}
if (png_ptr->pass == 6 && png_ptr->height <= 4)
{
png_push_have_row(png_ptr, NULL);
png_read_push_finish_row(png_ptr);
}
break;
}
case 1:
{
int i;
for (i = 0; i < 8 && png_ptr->pass == 1; i++)
{
png_push_have_row(png_ptr, png_ptr->row_buf + 1);
png_read_push_finish_row(png_ptr);
//.........这里部分代码省略.........
开发者ID:007Indian，项目名称:opencv，代码行数:101，代码来源:pngpread.c
示例8: png_push_read_chunk
void /* PRIVATE */
png_push_read_chunk(png_structrp png_ptr, png_inforp info_ptr)
{
png_uint_32 chunk_name;
#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED
int keep; /* unknown handling method */
#endif
/* First we make sure we have enough data for the 4-byte chunk name
* and the 4-byte chunk length before proceeding with decoding the
* chunk data. To fully decode each of these chunks, we also make
* sure we have enough data in the buffer for the 4-byte CRC at the
* end of every chunk (except IDAT, which is handled separately).
*/
if ((png_ptr->mode & PNG_HAVE_CHUNK_HEADER) == 0)
{
png_byte chunk_length[4];
png_byte chunk_tag[4];
PNG_PUSH_SAVE_BUFFER_IF_LT(8)
png_push_fill_buffer(png_ptr, chunk_length, 4);
png_ptr->push_length = png_get_uint_31(png_ptr, chunk_length);
png_reset_crc(png_ptr);
png_crc_read(png_ptr, chunk_tag, 4);
png_ptr->chunk_name = PNG_CHUNK_FROM_STRING(chunk_tag);
png_check_chunk_name(png_ptr, png_ptr->chunk_name);
png_ptr->mode |= PNG_HAVE_CHUNK_HEADER;
}
chunk_name = png_ptr->chunk_name;
if (chunk_name == png_IDAT)
{
if ((png_ptr->mode & PNG_AFTER_IDAT) != 0)
png_ptr->mode |= PNG_HAVE_CHUNK_AFTER_IDAT;
/* If we reach an IDAT chunk, this means we have read all of the
* header chunks, and we can start reading the image (or if this
* is called after the image has been read - we have an error).
*/
if ((png_ptr->mode & PNG_HAVE_IHDR) == 0)
png_error(png_ptr, "Missing IHDR before IDAT");
else if (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE &&
(png_ptr->mode & PNG_HAVE_PLTE) == 0)
png_error(png_ptr, "Missing PLTE before IDAT");
png_ptr->mode |= PNG_HAVE_IDAT;
png_ptr->process_mode = PNG_READ_IDAT_MODE;
if ((png_ptr->mode & PNG_HAVE_CHUNK_AFTER_IDAT) == 0)
if (png_ptr->push_length == 0)
return;
if ((png_ptr->mode & PNG_AFTER_IDAT) != 0)
png_benign_error(png_ptr, "Too many IDATs found");
}
if (chunk_name == png_IHDR)
{
if (png_ptr->push_length != 13)
png_error(png_ptr, "Invalid IHDR length");
PNG_PUSH_SAVE_BUFFER_IF_FULL
png_handle_IHDR(png_ptr, info_ptr, png_ptr->push_length);
}
else if (chunk_name == png_IEND)
{
PNG_PUSH_SAVE_BUFFER_IF_FULL
png_handle_IEND(png_ptr, info_ptr, png_ptr->push_length);
png_ptr->process_mode = PNG_READ_DONE_MODE;
png_push_have_end(png_ptr, info_ptr);
}
#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED
else if ((keep = png_chunk_unknown_handling(png_ptr, chunk_name)) != 0)
{
PNG_PUSH_SAVE_BUFFER_IF_FULL
png_handle_unknown(png_ptr, info_ptr, png_ptr->push_length, keep);
if (chunk_name == png_PLTE)
png_ptr->mode |= PNG_HAVE_PLTE;
}
#endif
else if (chunk_name == png_PLTE)
{
PNG_PUSH_SAVE_BUFFER_IF_FULL
png_handle_PLTE(png_ptr, info_ptr, png_ptr->push_length);
}
else if (chunk_name == png_IDAT)
{
png_ptr->idat_size = png_ptr->push_length;
png_ptr->process_mode = PNG_READ_IDAT_MODE;
png_push_have_info(png_ptr, info_ptr);
png_ptr->zstream.avail_out =
(uInt) PNG_ROWBYTES(png_ptr->pixel_depth,
//.........这里部分代码省略.........
开发者ID:007Indian，项目名称:opencv，代码行数:101，代码来源:pngpread.c
示例9: png_process_IDAT_data
void /* PRIVATE */
png_process_IDAT_data(png_structrp png_ptr, png_bytep buffer,
png_size_t buffer_length)
{
/* The caller checks for a non-zero buffer length. */
if (!(buffer_length > 0) || buffer == NULL)
png_error(png_ptr, "No IDAT data (internal error)");
#ifdef PNG_READ_APNG_SUPPORTED
/* If the app is not APNG-aware, decode only the first frame */
if ((png_ptr->apng_flags & PNG_APNG_APP) == 0 &&
png_ptr->num_frames_read > 0)
{
png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED;
return;
}
#endif
/* This routine must process all the data it has been given
* before returning, calling the row callback as required to
* handle the uncompressed results.
*/
png_ptr->zstream.next_in = buffer;
/* TODO: WARNING: TRUNCATION ERROR: DANGER WILL ROBINSON: */
png_ptr->zstream.avail_in = (uInt)buffer_length;
/* Keep going until the decompressed data is all processed
* or the stream marked as finished.
*/
while (png_ptr->zstream.avail_in > 0 &&
(png_ptr->flags & PNG_FLAG_ZSTREAM_ENDED) == 0)
{
int ret;
/* We have data for zlib, but we must check that zlib
* has someplace to put the results. It doesn't matter
* if we don't expect any results -- it may be the input
* data is just the LZ end code.
*/
if (!(png_ptr->zstream.avail_out > 0))
{
/* TODO: WARNING: TRUNCATION ERROR: DANGER WILL ROBINSON: */
png_ptr->zstream.avail_out = (uInt)(PNG_ROWBYTES(png_ptr->pixel_depth,
png_ptr->iwidth) + 1);
png_ptr->zstream.next_out = png_ptr->row_buf;
}
/* Using Z_SYNC_FLUSH here means that an unterminated
* LZ stream (a stream with a missing end code) can still
* be handled, otherwise (Z_NO_FLUSH) a future zlib
* implementation might defer output and therefore
* change the current behavior (see comments in inflate.c
* for why this doesn't happen at present with zlib 1.2.5).
*/
ret = PNG_INFLATE(png_ptr, Z_SYNC_FLUSH);
/* Check for any failure before proceeding. */
if (ret != Z_OK && ret != Z_STREAM_END)
{
/* Terminate the decompression. */
png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED;
png_ptr->zowner = 0;
/* This may be a truncated stream (missing or
* damaged end code). Treat that as a warning.
*/
if (png_ptr->row_number >= png_ptr->num_rows ||
png_ptr->pass > 6)
png_warning(png_ptr, "Truncated compressed data in IDAT");
else
{
if (ret == Z_DATA_ERROR)
png_benign_error(png_ptr, "IDAT: ADLER32 checksum mismatch");
else
png_error(png_ptr, "Decompression error in IDAT");
}
/* Skip the check on unprocessed input */
return;
}
/* Did inflate output any data? */
if (png_ptr->zstream.next_out != png_ptr->row_buf)
{
/* Is this unexpected data after the last row?
* If it is, artificially terminate the LZ output
* here.
*/
if (png_ptr->row_number >= png_ptr->num_rows ||
png_ptr->pass > 6)
{
/* Extra data. */
png_warning(png_ptr, "Extra compressed data in IDAT");
png_ptr->flags |= PNG_FLAG_ZSTREAM_ENDED;
png_ptr->zowner = 0;
/* Do no more processing; skip the unprocessed
* input check below.
//.........这里部分代码省略.........
开发者ID:subsevenx2001，项目名称:gecko-dev，代码行数:101，代码来源:pngpread.c
示例10: PNG_ROWBYTES
v = 0;
} else {
shift -= 4;
}
sp++;
}
if (shift != 4) {
*dp = (png_byte)v;
}
break;
}
}
row_info->bit_depth = (png_byte)bit_depth;
row_info->pixel_depth = (png_byte)(bit_depth * row_info->channels);
row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth,
row_info->width);
}
}
#endif
#if defined(PNG_WRITE_SHIFT_SUPPORTED)
/* Shift pixel values to take advantage of whole range. Pass the
* true number of bits in bit_depth. The row should be packed
* according to row_info->bit_depth. Thus, if you had a row of
* bit depth 4, but the pixels only had values from 0 to 7, you
* would pass 3 as bit_depth, and this routine would translate the
* data to 0 to 15.
*/
void /* PRIVATE */
png_do_shift(png_row_infop row_info, png_bytep row, png_color_8p bit_depth) {
png_debug(1, "in png_do_shift\n");
开发者ID:353，项目名称:viewercv，代码行数:32，代码来源:pngwtran.c
示例11: png_push_read_chunk
//.........这里部分代码省略.........
{
if (png_ptr->push_length + 4 > png_ptr->buffer_size)
{
png_push_save_buffer(png_ptr);
return;
}
png_handle_unknown(png_ptr, info_ptr, png_ptr->push_length, keep);
if (chunk_name == png_PLTE)
png_ptr->mode |= PNG_HAVE_PLTE;
}
#endif
else if (chunk_name == png_PLTE)
{
if (png_ptr->push_length + 4 > png_ptr->buffer_size)
{
png_push_save_buffer(png_ptr);
return;
}
png_handle_PLTE(png_ptr, info_ptr, png_ptr->push_length);
}
else if (chunk_name == png_IDAT)
{
#ifdef PNG_READ_APNG_SUPPORTED
png_have_info(png_ptr, info_ptr);
#endif
png_ptr->idat_size = png_ptr->push_length;
png_ptr->process_mode = PNG_READ_IDAT_MODE;
png_push_have_info(png_ptr, info_ptr);
png_ptr->zstream.avail_out =
(uInt) PNG_ROWBYTES(png_ptr->pixel_depth,
png_ptr->iwidth) + 1;
png_ptr->zstream.next_out = png_ptr->row_buf;
return;
}
#ifdef PNG_READ_gAMA_SUPPORTED
else if (png_ptr->chunk_name == png_gAMA)
{
if (png_ptr->push_length + 4 > png_ptr->buffer_size)
{
png_push_save_buffer(png_ptr);
return;
}
png_handle_gAMA(png_ptr, info_ptr, png_ptr->push_length);
}
#endif
#ifdef PNG_READ_sBIT_SUPPORTED
else if (png_ptr->chunk_name == png_sBIT)
{
if (png_ptr->push_length + 4 > png_ptr->buffer_size)
{
png_push_save_buffer(png_ptr);
return;
}
png_handle_sBIT(png_ptr, info_ptr, png_ptr->push_length);
}
#endif
#ifdef PNG_READ_cHRM_SUPPORTED
开发者ID:blue119，项目名称:gecko-dev，代码行数:67，代码来源:pngpread.c
注：本文中的PNG_ROWBYTES函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论