C++ PMAC_STRUCT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PMAC_STRUCT函数的典型用法代码示例。如果您正苦于以下问题：C++ PMAC_STRUCT函数的具体用法？C++ PMAC_STRUCT怎么用？C++ PMAC_STRUCT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PMAC_STRUCT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: csrTdlsSendLinkEstablishParams

/*
 * TDLS request API, called from HDD to Send Link Establishment Parameters
 */
VOS_STATUS csrTdlsSendLinkEstablishParams(tHalHandle hHal,
                                                 tANI_U8 sessionId,
                                                 tSirMacAddr peerMac,
                                                 tCsrTdlsLinkEstablishParams *tdlsLinkEstablishParams)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    tSmeCmd *tdlsLinkEstablishCmd;
    eHalStatus status = eHAL_STATUS_FAILURE ;
    //If connected and in Infra. Only then allow this
    if( CSR_IS_SESSION_VALID( pMac, sessionId ) &&
        csrIsConnStateConnectedInfra( pMac, sessionId ) &&
        (NULL != peerMac) )
    {
        tdlsLinkEstablishCmd = csrGetCommandBuffer(pMac) ;

        if(tdlsLinkEstablishCmd)
        {
            tTdlsLinkEstablishCmdInfo *tdlsLinkEstablishCmdInfo =
            &tdlsLinkEstablishCmd->u.tdlsCmd.u.tdlsLinkEstablishCmdInfo ;

            tdlsLinkEstablishCmd->sessionId = sessionId;

            vos_mem_copy( tdlsLinkEstablishCmdInfo->peerMac,
                          peerMac, sizeof(tSirMacAddr));
            tdlsLinkEstablishCmdInfo->isBufSta = tdlsLinkEstablishParams->isBufSta;
            tdlsLinkEstablishCmdInfo->isResponder = tdlsLinkEstablishParams->isResponder;
            tdlsLinkEstablishCmdInfo->maxSp = tdlsLinkEstablishParams->maxSp;
            tdlsLinkEstablishCmdInfo->uapsdQueues = tdlsLinkEstablishParams->uapsdQueues;
            tdlsLinkEstablishCmdInfo->isOffChannelSupported =
                                               tdlsLinkEstablishParams->isOffChannelSupported;

            vos_mem_copy(tdlsLinkEstablishCmdInfo->supportedChannels,
                          tdlsLinkEstablishParams->supportedChannels,
                          tdlsLinkEstablishParams->supportedChannelsLen);
            tdlsLinkEstablishCmdInfo->supportedChannelsLen =
                                    tdlsLinkEstablishParams->supportedChannelsLen;

            vos_mem_copy(tdlsLinkEstablishCmdInfo->supportedOperClasses,
                          tdlsLinkEstablishParams->supportedOperClasses,
                          tdlsLinkEstablishParams->supportedOperClassesLen);
            tdlsLinkEstablishCmdInfo->supportedOperClassesLen =
                                    tdlsLinkEstablishParams->supportedOperClassesLen;
            tdlsLinkEstablishCmdInfo->isResponder= tdlsLinkEstablishParams->isResponder;
            tdlsLinkEstablishCmdInfo->maxSp= tdlsLinkEstablishParams->maxSp;
            tdlsLinkEstablishCmdInfo->uapsdQueues= tdlsLinkEstablishParams->uapsdQueues;
            tdlsLinkEstablishCmd->command = eSmeCommandTdlsLinkEstablish ;
            tdlsLinkEstablishCmd->u.tdlsCmd.size = sizeof(tTdlsLinkEstablishCmdInfo) ;
            smePushCommand(pMac, tdlsLinkEstablishCmd, FALSE) ;
            status = eHAL_STATUS_SUCCESS ;
        }
    }

    return status ;
}

开发者ID:AmperificSuperKANG，项目名称:android_kernel_mako，代码行数:57，代码来源:csrTdlsProcess.c

示例2: sme_SetFTPTKState

void sme_SetFTPTKState(tHalHandle hHal, tANI_U32 sessionId, v_BOOL_t state)
{
   tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
   tCsrRoamSession *pSession = CSR_GET_SESSION(pMac, sessionId);

   if (!pSession) {
      smsLog(pMac, LOGE, FL("pSession is NULL"));
      return;
   }
   pSession->ftSmeContext.setFTPTKState = state;
}

开发者ID:Tkkg1994，项目名称:qcacld-2.0，代码行数:11，代码来源:sme_FTApi.c

示例3: csrCheckPSReady

tANI_BOOLEAN csrCheckPSReady(void *pv)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( pv );

    if (pMac->roam.sPendingCommands < 0)
    {
       VOS_ASSERT( pMac->roam.sPendingCommands >= 0 );
       return 0;
    }
    return (pMac->roam.sPendingCommands == 0);
}

开发者ID:Tkkg1994，项目名称:qcacld-2.0，代码行数:11，代码来源:csrCmdProcess.c

示例4: ccmStart

void ccmStart(tHalHandle hHal)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );

    pMac->ccm.state = eCCM_STARTED ;

#if defined(ANI_LOGDUMP)
    ccmDumpInit(hHal);
#endif //#if defined(ANI_LOGDUMP)

    return ;
}

开发者ID:fantomlez，项目名称:android_kernel_acer_hemingway，代码行数:12，代码来源:ccmApi.c

示例5: sme_NanRegisterCallback

/******************************************************************************
 * Function: sme_NanRegisterCallback
 *
 * Description:
 * This function gets called when HDD wants register nan rsp callback with
 * sme layer.
 *
 * Args:
 * hHal and callback which needs to be registered.
 *
 * Returns:
 * void
 *****************************************************************************/
void sme_NanRegisterCallback(tHalHandle hHal, NanCallback callback)
{
	 tpAniSirGlobal pMac = NULL;

	 if (NULL == hHal) {
		 VOS_TRACE(VOS_MODULE_ID_SME, VOS_TRACE_LEVEL_ERROR,
				FL("hHal is not valid"));
		 return;
	 }
	 pMac = PMAC_STRUCT(hHal);
	 pMac->sme.nanCallback = callback;
}

开发者ID:dianlujitao，项目名称:platform_vendor_qcom-opensource_wlan_qcacld-2.0，代码行数:25，代码来源:nan_Api.c

示例6: ccmStop

void ccmStop(tHalHandle hHal)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );

    pMac->ccm.state = eCCM_STOPPED ;

    pal_local_bh_disable() ;
    purgeReqQ(hHal);
    pal_local_bh_enable() ;

    return ;
}

开发者ID:fantomlez，项目名称:android_kernel_acer_hemingway，代码行数:12，代码来源:ccmApi.c

示例7: ccmCfgUpdate

eHalStatus ccmCfgUpdate(tHalHandle hHal, tCcmCfgSetCallback callback)
{
    tHddHandle hHdd = halHandle2HddHandle(hHal);
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus status ;

    pal_local_bh_disable() ;

    status = cfgUpdate(pMac, hHdd, callback) ;
    if (status == eHAL_STATUS_SUCCESS)
    {
        if (pMac->ccm.replay.nr_param == 0)
        {
            /* there is nothing saved at comp[], so we are done! */
            pMac->ccm.replay.started = 0 ;
        }
        else
        {
            /* we have sent update message to MAC SW */
            void *sem ;

            status = palMutexAllocLocked( hHdd, &sem ) ;
            if (status != eHAL_STATUS_SUCCESS)
            {
                smsLog(pMac, LOGE, FL("mutex alloc failed"));
                pMac->ccm.replay.started = 0 ;
            }
            else
            {
                pMac->ccm.replay.done = sem ;
            }
        }
    }

    pal_local_bh_enable() ;

    /* Waiting here ... */
    if (status == eHAL_STATUS_SUCCESS && pMac->ccm.replay.done)
    {
#ifdef CCM_DEBUG
        smsLog(pMac, LOGW, FL("ccmWaitForCompletion(%p)"), pMac->ccm.replay.done);
#endif
        ccmWaitForCompletion(hHdd, pMac->ccm.replay.done);

#ifdef CCM_DEBUG
        smsLog(pMac, LOGW, FL("free(%p)"), pMac->ccm.replay.done);
#endif
        palSemaphoreFree( hHdd, pMac->ccm.replay.done) ;
    }

    return status ;
}

开发者ID:fantomlez，项目名称:android_kernel_acer_hemingway，代码行数:52，代码来源:ccmApi.c

示例8: sme_FTReset

/*--------------------------------------------------------------------------
  Reset the FT context.
  ------------------------------------------------------------------------*/
void sme_FTReset(tHalHandle hHal)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    if (pMac == NULL)
    {
        VOS_TRACE(VOS_MODULE_ID_SME, VOS_TRACE_LEVEL_ERROR, FL("pMac is NULL"));
        return;
    }
    if (pMac->ft.ftSmeContext.auth_ft_ies != NULL)
    {
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
        smsLog( pMac, LOGE, FL(" Freeing FT Auth IE %p and setting to NULL"),
            pMac->ft.ftSmeContext.auth_ft_ies);
#endif
        vos_mem_free(pMac->ft.ftSmeContext.auth_ft_ies);
    }
    pMac->ft.ftSmeContext.auth_ft_ies = NULL;
    pMac->ft.ftSmeContext.auth_ft_ies_length = 0;

    if (pMac->ft.ftSmeContext.reassoc_ft_ies != NULL)
    {
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
        smsLog( pMac, LOGE, FL(" Freeing FT Reassoc  IE %p and setting to NULL"),
            pMac->ft.ftSmeContext.auth_ft_ies);
#endif
        vos_mem_free(pMac->ft.ftSmeContext.reassoc_ft_ies);
    }
    pMac->ft.ftSmeContext.reassoc_ft_ies = NULL;
    pMac->ft.ftSmeContext.reassoc_ft_ies_length = 0;

    if (pMac->ft.ftSmeContext.psavedFTPreAuthRsp != NULL)
    {
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
        smsLog( pMac, LOGE, FL("Freeing FtPreAuthRsp %p and setting to NULL"),
            pMac->ft.ftSmeContext.psavedFTPreAuthRsp);
#endif
        vos_mem_free(pMac->ft.ftSmeContext.psavedFTPreAuthRsp);
    }
    pMac->ft.ftSmeContext.psavedFTPreAuthRsp = NULL;
    pMac->ft.ftSmeContext.setFTPreAuthState = FALSE;
    pMac->ft.ftSmeContext.setFTPTKState = FALSE;

    if (pMac->ft.ftSmeContext.pCsrFTKeyInfo != NULL)
    {
        vos_mem_zero(pMac->ft.ftSmeContext.pCsrFTKeyInfo,
                       sizeof(tCsrRoamSetKey));
        vos_mem_free(pMac->ft.ftSmeContext.pCsrFTKeyInfo);
    }
    pMac->ft.ftSmeContext.pCsrFTKeyInfo = NULL;
    vos_mem_zero(pMac->ft.ftSmeContext.preAuthbssId, ANI_MAC_ADDR_SIZE);
    pMac->ft.ftSmeContext.FTState = eFT_START_READY;
}

开发者ID:supercairos，项目名称:android_kernel_doro_msm8916_2，代码行数:55，代码来源:sme_FTApi.c

示例9: sme_p2p_close

CDF_STATUS sme_p2p_close(tHalHandle hHal)
{
	tpAniSirGlobal pMac = PMAC_STRUCT(hHal);

	if (pMac->p2pContext.probeRspIe) {
		cdf_mem_free(pMac->p2pContext.probeRspIe);
		pMac->p2pContext.probeRspIe = NULL;
	}

	pMac->p2pContext.probeRspIeLength = 0;

	return CDF_STATUS_SUCCESS;
}

开发者ID:S5-APQ8084，项目名称:qcacld-3.0，代码行数:13，代码来源:p2p_api.c

示例10: sme_p2p_open

CDF_STATUS sme_p2p_open(tHalHandle hHal)
{
	tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
	CDF_STATUS status = CDF_STATUS_SUCCESS;

	/* If static structure is too big, Need to change this function to allocate memory dynamically */
	cdf_mem_zero(&pMac->p2pContext, sizeof(tp2pContext));

	if (!CDF_IS_STATUS_SUCCESS(status)) {
		sme_p2p_close(hHal);
	}

	return status;
}

开发者ID:S5-APQ8084，项目名称:qcacld-3.0，代码行数:14，代码来源:p2p_api.c

示例11: sme_p2pClose

eHalStatus sme_p2pClose( tHalHandle hHal )
{
   tpAniSirGlobal pMac = PMAC_STRUCT(hHal);

    if( pMac->p2pContext.probeRspIe )
    {
        vos_mem_free(pMac->p2pContext.probeRspIe);
        pMac->p2pContext.probeRspIe = NULL;
    }

    pMac->p2pContext.probeRspIeLength = 0;

   return eHAL_STATUS_SUCCESS;
}

开发者ID:dianlujitao，项目名称:platform_vendor_qcom-opensource_wlan_qcacld-2.0，代码行数:14，代码来源:p2p_Api.c

示例12: sme_FTReset

/*--------------------------------------------------------------------------
  Reset the FT context.
  ------------------------------------------------------------------------*/
void sme_FTReset(tHalHandle hHal, tANI_U32 sessionId)
{
   tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
   tCsrRoamSession *pSession = NULL;

   if (pMac == NULL) {
      VOS_TRACE(VOS_MODULE_ID_SME, VOS_TRACE_LEVEL_ERROR, FL("pMac is NULL"));
      return;
   }

   pSession = CSR_GET_SESSION(pMac, sessionId);
   if (NULL != pSession) {
      if (pSession->ftSmeContext.auth_ft_ies != NULL) {
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
          smsLog(pMac, LOG1, FL("Freeing FT Auth IE %p and setting to NULL"),
                pSession->ftSmeContext.auth_ft_ies);
#endif
         vos_mem_free(pSession->ftSmeContext.auth_ft_ies);
         pSession->ftSmeContext.auth_ft_ies = NULL;
      }
      pSession->ftSmeContext.auth_ft_ies_length = 0;

      if (pSession->ftSmeContext.reassoc_ft_ies != NULL) {
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
          smsLog(pMac, LOG1,
                 FL("Freeing FT Reassoc IE %p and setting to NULL"),
                 pSession->ftSmeContext.reassoc_ft_ies);
#endif
         vos_mem_free(pSession->ftSmeContext.reassoc_ft_ies);
         pSession->ftSmeContext.reassoc_ft_ies = NULL;
      }
      pSession->ftSmeContext.reassoc_ft_ies_length = 0;

      if (pSession->ftSmeContext.psavedFTPreAuthRsp != NULL) {
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
          smsLog( pMac, LOG1, FL("Freeing FtPreAuthRsp %p and setting to NULL"),
                pSession->ftSmeContext.psavedFTPreAuthRsp);
#endif
          vos_mem_free(pSession->ftSmeContext.psavedFTPreAuthRsp);
          vos_mem_set(pSession->ftSmeContext.psavedFTPreAuthRsp,
                        sizeof(tSirFTPreAuthRsp), 0);
      }
      pSession->ftSmeContext.setFTPreAuthState = VOS_FALSE;
      pSession->ftSmeContext.setFTPTKState = VOS_FALSE;

      vos_mem_zero(pSession->ftSmeContext.preAuthbssId, ANI_MAC_ADDR_SIZE);
      pSession->ftSmeContext.FTState = eFT_START_READY;
   }
}

开发者ID:gicho，项目名称:qcacld-2.0，代码行数:52，代码来源:sme_FTApi.c

示例13: sme_p2pOpen

eHalStatus sme_p2pOpen( tHalHandle hHal )
{
   tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
   eHalStatus status = eHAL_STATUS_SUCCESS;

   //If static structure is too big, Need to change this function to allocate memory dynamically
   vos_mem_zero(&pMac->p2pContext, sizeof( tp2pContext ));

   if(!HAL_STATUS_SUCCESS(status))
   {
      sme_p2pClose(hHal);
    }

   return status;
}

开发者ID:dianlujitao，项目名称:platform_vendor_qcom-opensource_wlan_qcacld-2.0，代码行数:15，代码来源:p2p_Api.c

示例14: csrFullPowerCallback

void csrFullPowerCallback(void *pv, eHalStatus status)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( pv );
    tListElem *pEntry;
    tSmeCmd *pCommand;

    (void)status;
    
    while( NULL != ( pEntry = csrLLRemoveHead( &pMac->roam.roamCmdPendingList, eANI_BOOLEAN_TRUE ) ) )
    {
        pCommand = GET_BASE_ADDR( pEntry, tSmeCmd, Link );
        smePushCommand( pMac, pCommand, eANI_BOOLEAN_FALSE );
    }

}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:15，代码来源:csrCmdProcess.c

示例15: sme_send_action_cnf

CDF_STATUS sme_send_action_cnf(tHalHandle hHal, uint8_t *pMsg)
{
	tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
	CDF_STATUS status = CDF_STATUS_SUCCESS;
	tCsrRoamInfo RoamInfo;
	tSirSmeRsp *pSmeRsp = (tSirSmeRsp *) pMsg;

	/* forward the indication to HDD */
	/* RoamInfo can be passed as NULL....todo */
	csr_roam_call_callback(pMac, pSmeRsp->sessionId, &RoamInfo, 0,
			       eCSR_ROAM_SEND_ACTION_CNF,
			       (pSmeRsp->statusCode == eSIR_SME_SUCCESS) ? 0 :
			       eCSR_ROAM_RESULT_SEND_ACTION_FAIL);
	return status;
}

开发者ID:S5-APQ8084，项目名称:qcacld-3.0，代码行数:15，代码来源:p2p_api.c

示例16: sme_FTOpen

/*--------------------------------------------------------------------------
  Initialize the FT context. 
  ------------------------------------------------------------------------*/
void sme_FTOpen(tHalHandle hHal)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus     status = eHAL_STATUS_SUCCESS;

    //Clear the FT Context.
    sme_FTReset(hHal);
    status = vos_timer_init(&pMac->ft.ftSmeContext.preAuthReassocIntvlTimer,VOS_TIMER_TYPE_SW,
                            sme_PreauthReassocIntvlTimerCallback, (void *)pMac);

    if (eHAL_STATUS_SUCCESS != status)
    {
        smsLog(pMac, LOGE, FL("Preauth Reassoc interval Timer allocation failed"));
        return;
    }                 
}

开发者ID:GSandeep24，项目名称:android_kernel_lenovo_msm8916，代码行数:19，代码来源:sme_FTApi.c

示例17: sme_GetFTPreAuthResponse

/*--------------------------------------------------------------------------
 *
 * HDD Interface to SME. SME now sends the Auth 2 and RIC IEs up to the supplicant.
 * The supplicant will then proceed to send down the
 * Reassoc Req.
 *
 *------------------------------------------------------------------------*/
void sme_GetFTPreAuthResponse( tHalHandle hHal, tANI_U32 sessionId, tANI_U8 *ft_ies,
                               tANI_U32 ft_ies_ip_len, tANI_U16 *ft_ies_length )
{
   tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
   tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, sessionId );
   eHalStatus status = eHAL_STATUS_FAILURE;

   if (!pSession)
   {
      smsLog( pMac, LOGE, FL("pSession is NULL"));
      return;
   }

   *ft_ies_length = 0;

   status = sme_AcquireGlobalLock( &pMac->sme );
   if (!( HAL_STATUS_SUCCESS( status )))
      return;

   /* All or nothing - proceed only if both BSSID and FT IE fit */
   if((ANI_MAC_ADDR_SIZE +
     pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies_length) > ft_ies_ip_len)
   {
      sme_ReleaseGlobalLock( &pMac->sme );
      return;
   }

   // hdd needs to pack the bssid also along with the
   // auth response to supplicant
   vos_mem_copy(ft_ies, pSession->ftSmeContext.preAuthbssId, ANI_MAC_ADDR_SIZE);

   // Copy the auth resp FTIEs
   vos_mem_copy(&(ft_ies[ANI_MAC_ADDR_SIZE]),
         pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies,
         pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies_length);

   *ft_ies_length = ANI_MAC_ADDR_SIZE +
      pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies_length;

   pSession->ftSmeContext.FTState = eFT_REASSOC_REQ_WAIT;

#ifdef WLAN_FEATURE_VOWIFI_11R_DEBUG
   smsLog( pMac, LOG1, FL(" Filled auth resp = %d"), *ft_ies_length);
#endif
   sme_ReleaseGlobalLock( &pMac->sme );
   return;
}

开发者ID:Tkkg1994，项目名称:qcacld-2.0，代码行数:54，代码来源:sme_FTApi.c

示例18: p2pRemainOnChannel

/* ---------------------------------------------------------------------------

    \fn p2pRemainOnChannel
    \brief  API to post the remain on channel command.
    \param  hHal - The handle returned by macOpen.
    \param  sessinId - HDD session ID.
    \param  channel - Channel to remain on channel.
    \param  duration - Duration for which we should remain on channel
    \param  callback - callback function.
    \param  pContext - argument to the callback function
    \return eHalStatus

  -------------------------------------------------------------------------------*/
eHalStatus p2pRemainOnChannel(tHalHandle hHal, tANI_U8 sessionId,
         tANI_U8 channel, tANI_U32 duration,
        remainOnChanCallback callback,
        void *pContext, tANI_U8 isP2PProbeReqAllowed
        )
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
    tSmeCmd *pRemainChlCmd = NULL;
    tANI_U32 phyMode;

    pRemainChlCmd = smeGetCommandBuffer(pMac);
    if(pRemainChlCmd == NULL)
        return eHAL_STATUS_FAILURE;

    if (SIR_BAND_5_GHZ == GetRFBand(channel))
    {
       phyMode = WNI_CFG_PHY_MODE_11A;
    }
    else
    {
       phyMode = WNI_CFG_PHY_MODE_11G;
    }

    cfgSetInt(pMac, WNI_CFG_PHY_MODE, phyMode);

    do
    {
        /* call set in context */
        pRemainChlCmd->command = eSmeCommandRemainOnChannel;
        pRemainChlCmd->sessionId = sessionId;
        pRemainChlCmd->u.remainChlCmd.chn = channel;
        pRemainChlCmd->u.remainChlCmd.duration = duration;
        pRemainChlCmd->u.remainChlCmd.isP2PProbeReqAllowed = isP2PProbeReqAllowed;
        pRemainChlCmd->u.remainChlCmd.callback = callback;
        pRemainChlCmd->u.remainChlCmd.callbackCtx = pContext;

        //Put it at the head of the Q if we just finish finding the peer and ready to send a frame
        status = csrQueueSmeCommand(pMac, pRemainChlCmd, eANI_BOOLEAN_FALSE);
    } while(0);

    smsLog(pMac, LOGW, "exiting function %s", __func__);

    return(status);
}

开发者ID:dianlujitao，项目名称:platform_vendor_qcom-opensource_wlan_qcacld-2.0，代码行数:58，代码来源:p2p_Api.c

示例19: ccmCfgGetInt

eHalStatus ccmCfgGetInt(tHalHandle hHal, tANI_U32 cfgId, tANI_U32 *pValue)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus status = eHAL_STATUS_SUCCESS ;
    tCfgReq *req = pMac->ccm.comp[cfgId] ;

    if (req && req->state == eCCM_REQ_DONE)
    {
        *pValue = req->ccmValue ; 
    }
    else
    {
        if (wlan_cfgGetInt(pMac, (tANI_U16)cfgId, pValue) != eSIR_SUCCESS)
            status = eHAL_STATUS_FAILURE;
    }

    return status ;
}

开发者ID:fantomlez，项目名称:android_kernel_acer_hemingway，代码行数:18，代码来源:ccmApi.c

示例20: oemData_OemDataReqOpen

eHalStatus oemData_OemDataReqOpen(tHalHandle hHal)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tpAniSirGlobal pMac = PMAC_STRUCT(hHal);

    do
    {
        //initialize all the variables to null
        vos_mem_set(&(pMac->oemData), sizeof(tOemDataStruct), 0);
        if(!HAL_STATUS_SUCCESS(status))
        {
            smsLog(pMac, LOGE, "oemData_OemDataReqOpen: Cannot allocate memory for the timer function");
            break;
        }
    } while(0);

    return status;
}

开发者ID:Arunvasu，项目名称:taoshan，代码行数:18，代码来源:oemDataApi.c

注：本文中的PMAC_STRUCT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。