C++ PLUGIN_CLOSE函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PLUGIN_CLOSE函数的典型用法代码示例。如果您正苦于以下问题：C++ PLUGIN_CLOSE函数的具体用法？C++ PLUGIN_CLOSE怎么用？C++ PLUGIN_CLOSE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PLUGIN_CLOSE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: test_setDirectionMatch

void test_setDirectionMatch()
{
	Key *parentKey = keyNew ("user/tests/glob", KEY_END);
	KeySet *conf = ksNew (20,
			keyNew ("user/glob/set/#1", KEY_VALUE, "/*",
					KEY_META, "testmetakey1", "testvalue1",
					KEY_META, "testmetakey2", "testvalue2",
					KEY_END),
			keyNew ("user/glob/get/#1", KEY_VALUE, "/*/*",
					KEY_META, "testmetakey1", "testvalue1",
					KEY_META, "testmetakey2", "testvalue2",
					KEY_END),
			KS_END);
	PLUGIN_OPEN("glob");

	KeySet* ks = createKeys ();

	succeed_if(plugin->kdbSet (plugin, ks, parentKey) >= 1,
			"call to kdbSet was not successful");
	succeed_if(output_error (parentKey), "error in kdbSet");
	succeed_if(output_warnings (parentKey), "warnings in kdbSet");

	testKeys (ks);
	ksDel(ks);
	keyDel(parentKey);

	PLUGIN_CLOSE();
}

开发者ID:tryge，项目名称:libelektra，代码行数:28，代码来源:testmod_glob.c

示例2: test_readline

void test_readline(){

	char * filename = srcdir_file("line/linetest");
	Key * parentKey = keyNew ("user/tests/line", KEY_VALUE, filename, KEY_END);
	KeySet *conf = 0;
	PLUGIN_OPEN("line");
	printf("%s\n", filename);

	KeySet *ks=ksNew(0, KS_END);
	succeed_if (plugin->kdbGet(plugin, ks, parentKey) >= 1, "call to kdbGet was not successful");
	Key *key = ksLookupByName(ks, "user/tests/line/#0", 0);
	exit_if_fail (key, "line1 key not found");
	succeed_if (strcmp("test1", keyValue(key)) == 0, "line ´ does not match");

	key = ksLookupByName(ks, "user/tests/line/#_10", 0);
	exit_if_fail (key, "line11 key not found");
	succeed_if (strcmp("", keyValue(key)) == 0, "line 10 should be blank");

	key = ksLookupByName(ks, "user/tests/line/#_13", 0);
	exit_if_fail (key, "line14 key not found");
	succeed_if (strcmp("printf(\"hello world\\n\");", keyValue(key)) == 0, "line 13 not correct");

	ksDel (ks);
	keyDel(parentKey);

	PLUGIN_CLOSE();
}

开发者ID:tryge，项目名称:libelektra，代码行数:27，代码来源:testmod_line.c

示例3: test_readfstab

void test_readfstab (const char * file)
{
	Key * parentKey = keyNew ("user/tests/fstab", KEY_VALUE, srcdir_file (file), KEY_END);
	KeySet * conf = 0;
	PLUGIN_OPEN ("fstab");

	KeySet * ks = ksNew (0, KS_END);

	printf ("Reading fstab using file: %s\n", file);

	succeed_if (plugin->kdbGet (plugin, ks, parentKey) >= 1, "call to kdbGet was not successful");

	// output_keyset(ks);

	Key * key = ksLookupByName (ks, "user/tests/fstab/\\//device", 0);
	exit_if_fail (key, "rootfs device not found");
	succeed_if (strcmp ("/dev/sda1", keyValue (key)) == 0, "device not correct");

	key = ksLookupByName (ks, "user/tests/fstab/\\/media\\/ext4/device", 0);
	exit_if_fail (key, "media device not found");
	succeed_if (strcmp ("/dev/sdg1", keyValue (key)) == 0, "device not correct");

	exit_if_fail (key = ksLookupByName (ks, "user/tests/fstab/\\/media\\/ext4/dumpfreq", 0), "rootfs device not found");
	succeed_if (strcmp ("0", keyValue (key)) == 0, "dumpfreq not correct");

	ksDel (ks);
	keyDel (parentKey);

	PLUGIN_CLOSE ();
}

开发者ID:fberlakovich，项目名称:libelektra，代码行数:30，代码来源:testmod_fstab.c

示例4: test_mmap_ksCopy

static void test_mmap_ksCopy (const char * tmpFile)
{
	Key * parentKey = keyNew (TEST_ROOT_KEY, KEY_VALUE, tmpFile, KEY_END);
	KeySet * conf = ksNew (0, KS_END);
	PLUGIN_OPEN ("mmapstorage");

	KeySet * ks = simpleTestKeySet ();
	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbSet was not successful");
	succeed_if (plugin->kdbGet (plugin, ks, parentKey) == 1, "kdbGet was not successful");
	succeed_if ((ks->flags & KS_FLAG_MMAP_ARRAY) == KS_FLAG_MMAP_ARRAY, "KeySet array not in mmap");

	KeySet * copyKs = ksNew (0, KS_END);
	if (ksCopy (copyKs, ks) == 1)
	{
		compare_keyset (copyKs, ks);
		compare_keyset (ks, copyKs);
	}
	else
	{
		yield_error ("ksCopy failed");
	}

	ksDel (copyKs);
	keyDel (parentKey);
	ksDel (ks);
	PLUGIN_CLOSE ();
}

开发者ID:sanssecours，项目名称:libelektra，代码行数:27，代码来源:testmod_mmapstorage.c

示例5: test_structure

void test_structure (void)
{
	printf ("Test structure of keys returned from uname plugin");

	Key * parentKey = keyNew ("user/test/key", KEY_END);
	KeySet * keys = ksNew (0, KS_END);
	KeySet * conf = 0;

	PLUGIN_OPEN ("uname");

	succeed_if (plugin->kdbGet (plugin, keys, parentKey) == 1, "could not call kdbGet");

	succeed_if (ksGetSize (keys) == 6, "size not correct");
	succeed_if (ksLookupByName (keys, "user/test/key", 0), "parentkey not found");
	succeed_if (ksLookupByName (keys, "user/test/key/sysname", 0), "sysname key not found");
	succeed_if (ksLookupByName (keys, "user/test/key/nodename", 0), "nodename key not found");
	succeed_if (ksLookupByName (keys, "user/test/key/release", 0), "release key not found");
	succeed_if (ksLookupByName (keys, "user/test/key/version", 0), "version key not found");
	succeed_if (ksLookupByName (keys, "user/test/key/machine", 0), "machine key not found");

	ksDel (keys);
	keyDel (parentKey);

	PLUGIN_CLOSE ();
}

开发者ID:0003088，项目名称:libelektra，代码行数:25，代码来源:testmod_uname.c

示例6: test_mmap_opmphm

static void test_mmap_opmphm (const char * tmpFile)
{
	Key * parentKey = keyNew (TEST_ROOT_KEY, KEY_VALUE, tmpFile, KEY_END);
	KeySet * conf = ksNew (0, KS_END);
	PLUGIN_OPEN ("mmapstorage");
	KeySet * ks = largeTestKeySet ();

	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbSet was not successful");
	ksDel (ks);

	ks = ksNew (0, KS_END);
	succeed_if (plugin->kdbGet (plugin, ks, parentKey) == 1, "kdbGet was not successful");

	const char * name = "user/tests/mmapstorage/dir7/key3";
	Key * found = ksLookupByName (ks, name, KDB_O_OPMPHM);

	if (!found)
	{
		yield_error ("Key not found.")
	}

	// write keyset with OPMPHM structures
	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbSet was not successful");

	ksDel (ks);
	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:sanssecours，项目名称:libelektra，代码行数:28，代码来源:testmod_mmapstorage.c

示例7: test_mmap_ks_copy_with_meta

static void test_mmap_ks_copy_with_meta (const char * tmpFile)
{
	Key * parentKey = keyNew (TEST_ROOT_KEY, KEY_VALUE, tmpFile, KEY_END);
	KeySet * conf = ksNew (0, KS_END);
	PLUGIN_OPEN ("mmapstorage");
	KeySet * ks = metaTestKeySet ();
	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbSet was not successful");
	ksDel (ks);

	KeySet * returned = ksNew (0, KS_END);

	succeed_if (plugin->kdbGet (plugin, returned, parentKey) == 1, "kdbGet was not successful");

	KeySet * expected = metaTestKeySet ();
	compare_keyset (expected, returned);

	KeySet * copiedKs = ksNew (0, KS_END);
	ksCopy (copiedKs, returned);
	compare_keyset (expected, copiedKs);

	ksDel (copiedKs);
	ksDel (expected);
	ksDel (returned);

	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:sanssecours，项目名称:libelektra，代码行数:27，代码来源:testmod_mmapstorage.c

示例8: test_mmap_metacopy

static void test_mmap_metacopy (const char * tmpFile)
{
	Key * parentKey = keyNew (TEST_ROOT_KEY, KEY_VALUE, tmpFile, KEY_END);
	KeySet * conf = ksNew (0, KS_END);
	PLUGIN_OPEN ("mmapstorage");
	KeySet * ks = metaTestKeySet ();

	Key * shareMeta = keyNew (0);
	keySetMeta (shareMeta, "sharedmeta", "shared meta key test");

	Key * current;
	ksRewind (ks);
	while ((current = ksNext (ks)) != 0)
	{
		keyCopyMeta (current, shareMeta, "sharedmeta");
	}
	KeySet * expected = ksDeepDup (ks);


	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbSet was not successful");

	KeySet * returned = ksNew (0, KS_END);
	succeed_if (plugin->kdbGet (plugin, returned, parentKey) == 1, "kdbGet was not successful");


	compare_keyset (expected, returned);

	ksDel (expected);
	ksDel (returned);

	keyDel (parentKey);
	keyDel (shareMeta);
	ksDel (ks);
	PLUGIN_CLOSE ();
}

开发者ID:sanssecours，项目名称:libelektra，代码行数:35，代码来源:testmod_mmapstorage.c

示例9: test_hostLensFormatting

void test_hostLensFormatting(char *fileName)
{
	Key *parentKey = keyNew ("user/tests/augeas-hosts", KEY_VALUE,
			srcdir_file (fileName), KEY_END);
	KeySet *conf = ksNew (20,
			keyNew ("system/lens", KEY_VALUE, "Hosts.lns", KEY_END), KS_END);
	PLUGIN_OPEN("augeas");

	KeySet *ks = ksNew(0, KS_END);

	succeed_if(plugin->kdbGet (plugin, ks, parentKey) >= 1,
			"call to kdbGet was not successful");
	succeed_if(output_error (parentKey), "error in kdbGet");
	succeed_if(output_warnings (parentKey), "warnings in kdbGet");

	keySetString (parentKey, elektraFilename());

	succeed_if(plugin->kdbSet (plugin, ks, parentKey) == 1,
			"kdbSet was not successful");
	succeed_if(output_error (parentKey), "error in kdbSet");
	succeed_if(output_warnings (parentKey), "warnings in kdbSet");

	succeed_if(
			compare_line_files (srcdir_file (fileName), keyString (parentKey)),
			"files do not match as expected");

	elektraUnlink(keyString (parentKey));
	keyDel (parentKey);
	ksDel (ks);


	PLUGIN_CLOSE ()
	;

}

开发者ID:beku，项目名称:libelektra，代码行数:35，代码来源:testmod_augeas.c

示例10: test_differentMetaNames

void test_differentMetaNames () {
	Key *parentKey = keyNew ("user/tests/keytometa", KEY_END);
	KeySet *conf = ksNew (0);
	PLUGIN_OPEN("keytometa");

	KeySet *ks = createDifferentMetaNameTestKeys();
	succeed_if(plugin->kdbGet (plugin, ks, parentKey) >= 1,
			"call to kdbGet was not successful");
	succeed_if(output_error (parentKey), "error in kdbGet");
	succeed_if(output_warnings (parentKey), "warnings in kdbGet");

	Key *key = ksLookupByName(ks, "user/normalkey1", 0);
	succeed_if (key, "normalkey1 was removed");

	const Key *metaKey1 = keyGetMeta(key, "testmeta1");
	succeed_if (metaKey1, "normalkey1 contained no meta testmeta1");
	const char *expected1 = "meta line1";
	succeed_if (!strcmp (keyString(metaKey1), expected1), "metakey testmeta1 of normalkey1 contained incorrect data");

	const Key *metaKey2= keyGetMeta(key, "testmeta2");
	succeed_if (metaKey2, "normalkey1 contained no meta testmeta1");
	const char *expected2 = "meta line2";
	succeed_if (!strcmp (keyString(metaKey2), expected2), "metakey testmeta1 of normalkey1 contained incorrect data");

	keyDel (parentKey);
	ksDel(ks);
	PLUGIN_CLOSE ();
}

开发者ID:intfrr，项目名称:libelektra，代码行数:28，代码来源:testmod_keytometa.c

示例11: test_hostLensDelete

void test_hostLensDelete(char *sourceFile, char *compFile)
{
	Key *parentKey = keyNew ("user/tests/augeas-hosts", KEY_VALUE,
			srcdir_file (sourceFile), KEY_END);
	KeySet *conf = ksNew (20,
			keyNew ("system/lens", KEY_VALUE, "Hosts.lns", KEY_END), KS_END);
	PLUGIN_OPEN("augeas");

	KeySet *ks = ksNew(0, KS_END);

	succeed_if(plugin->kdbGet (plugin, ks, parentKey) >= 1,
			"call to kdbGet was not successful");
	succeed_if(output_error (parentKey), "error in kdbGet");
	succeed_if(output_warnings (parentKey), "warnings in kdbGet");

	Key *key = ksLookupByName (ks, "user/tests/augeas-hosts/1", 0);
	exit_if_fail(key, "localhost not found");
	ksPopAtCursor(ks, ksGetCursor(ks));
	keyDel (key);

	key = ksLookupByName (ks, "user/tests/augeas-hosts/1/ipaddr", 0);
	exit_if_fail(key, "ip address of localhost not found");
	ksPopAtCursor(ks, ksGetCursor(ks));
	keyDel (key);

	key = ksLookupByName (ks, "user/tests/augeas-hosts/1/canonical", 0);
	exit_if_fail(key, "canonical of localhost not found");
	ksPopAtCursor(ks, ksGetCursor(ks));
	keyDel (key);

	key = ksLookupByName (ks, "user/tests/augeas-hosts/1/#comment", 0);
	exit_if_fail(key, "comment of localhost not found");
	ksPopAtCursor(ks, ksGetCursor(ks));
	keyDel (key);

	keySetString (parentKey, elektraFilename());

	succeed_if(plugin->kdbSet (plugin, ks, parentKey) == 1,
			"kdbSet was not successful");
	succeed_if(output_error (parentKey), "error in kdbSet");
	succeed_if(output_warnings (parentKey), "warnings in kdbSet");

	succeed_if(
			compare_line_files (srcdir_file (compFile), keyString (parentKey)),
			"files do not match as expected");

	ksDel (ks);

	elektraUnlink(keyString (parentKey));
	keyDel (parentKey);

	PLUGIN_CLOSE ()
	;

}

开发者ID:beku，项目名称:libelektra，代码行数:55，代码来源:testmod_augeas.c

示例12: testinvalid

void testinvalid (const char * file)
{
	Key * parentKey = keyNew ("user/tests/lineendings", KEY_VALUE, srcdir_file (file), KEY_END);
	KeySet * conf = ksNew (20, keyNew ("system/valid", KEY_VALUE, "CRLF", KEY_END), KS_END);
	PLUGIN_OPEN ("lineendings");
	KeySet * ks = ksNew (0, KS_END);
	succeed_if (plugin->kdbGet (plugin, ks, parentKey) == 1, "kdbget failed");
	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == (-1), "should have failed");
	ksDel (ks);
	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:BernhardDenner，项目名称:libelektra，代码行数:12，代码来源:testmod_lineendings.c

示例13: testvalid

void testvalid (const char * file)
{
	Key * parentKey = keyNew ("user/tests/lineendings", KEY_VALUE, srcdir_file (file), KEY_END);
	KeySet * conf = 0;
	PLUGIN_OPEN ("lineendings");
	KeySet * ks = ksNew (0, KS_END);
	succeed_if (plugin->kdbGet (plugin, ks, parentKey) == 1, "kdbget failed");
	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbset failed");
	ksDel (ks);
	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:BernhardDenner，项目名称:libelektra，代码行数:12，代码来源:testmod_lineendings.c

示例14: test_metaMerging

void test_metaMerging ()
{
	Key *parentKey = keyNew ("user/tests/keytometa", KEY_END);
	KeySet *conf = ksNew(0, KS_END);
	PLUGIN_OPEN("keytometa");

	KeySet* ks = createMergeTestkeys ();
	succeed_if(plugin->kdbGet (plugin, ks, parentKey) >= 1,
			"call to kdbGet was not successful");
	succeed_if(output_error (parentKey), "error in kdbGet");
	succeed_if(output_warnings (parentKey), "warnings in kdbGet");

	Key *key = ksLookupByName(ks, "user/normalkey1", 0);
	succeed_if (key, "normalkey1 was removed");

	const Key *metaKey1 = keyGetMeta(key, "testmeta");
	succeed_if (metaKey1, "normalkey1 contained no metakey");
	const char *expected1 = "meta line 1\nmeta line 2\nmeta line 3";
	succeed_if (!strcmp (keyString(metaKey1), expected1), "metakey of normalkey1 contained incorrect data");

	key = ksLookupByName(ks, "user/normalkey2", 0);
	succeed_if (key, "normalkey2 was removed");

	const Key *metaKey2 = keyGetMeta(key, "testmeta");
	succeed_if (metaKey2, "normalkey2 contained no metakey");
	const char *expected2 = "meta line 30\nmeta line 31\nmeta line 32";
	succeed_if (!strcmp (keyString(metaKey2), expected2), "metakey of normalkey2 contained incorrect data");

	/* change the value of the middle key */
	keySetMeta(key, "testmeta", "meta line 30\nchanged meta line\nmeta line 32");

	succeed_if(plugin->kdbSet (plugin, ks, parentKey) >= 1,
			"call to kdbSet was not successful");
	succeed_if(output_error (parentKey), "error in kdbSet");
	succeed_if(output_warnings (parentKey), "warnings in kdbSet");

	key = ksLookupByName(ks, "user/convertkey30", 0);
	succeed_if (key, "convertkey30 was not restored");
	succeed_if (!strcmp (keyString(key), "meta line 30"), "value of convertkey30 was modified");

	key = ksLookupByName (ks, "user/convertkey31", 0);
	succeed_if (key, "convertkey31 was not restored");
	succeed_if (!strcmp (keyString(key), "changed meta line"), "meta information was not written back to convertkey31");

	key = ksLookupByName (ks, "user/convertkey32", 0);
	succeed_if (key, "convertkey32 was not restored");
	succeed_if (!strcmp (keyString(key), "meta line 32"), "value of convertkey32 was modified");

	keyDel (parentKey);
	ksDel(ks);
	PLUGIN_CLOSE ();
}

开发者ID:tryge，项目名称:libelektra，代码行数:52，代码来源:testmod_keytometa.c

示例15: clearStorage

static void clearStorage (const char * tmpFile)
{
	Key * parentKey = keyNew (TEST_ROOT_KEY, KEY_VALUE, tmpFile, KEY_END);
	KeySet * conf = ksNew (0, KS_END);
	PLUGIN_OPEN ("mmapstorage");
	KeySet * ks = ksNew (0, KS_END);

	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == 1, "kdbSet was not successful");

	keyDel (parentKey);
	ksDel (ks);
	PLUGIN_CLOSE ();
}

开发者ID:sanssecours，项目名称:libelektra，代码行数:13，代码来源:testmod_mmapstorage.c

示例16: test_hostLensWrite

void test_hostLensWrite(char *fileName)
{
	Key *parentKey = keyNew ("user/tests/augeas-hosts", KEY_VALUE,
			elektraFilename(), KEY_END);
	KeySet *conf = ksNew (20,
			keyNew ("system/lens", KEY_VALUE, "Hosts.lns", KEY_END), KS_END);
	PLUGIN_OPEN("augeas");

	KeySet *ks = ksNew (30, keyNew ("user/tests/augeas-hosts/1", KEY_END),
			keyNew ("user/tests/augeas-hosts/1/ipaddr", KEY_VALUE, "127.0.0.1",
					KEY_META, "order", "10", KEY_END),
			keyNew ("user/tests/augeas-hosts/1/canonical", KEY_VALUE,
					"localhost", KEY_META, "order", "20", KEY_END),
			keyNew ("user/tests/augeas-hosts/1/#comment", KEY_VALUE,
					"hostcomment", KEY_META, "order", "21", KEY_END),
			keyNew ("user/tests/augeas-hosts/#comment", KEY_VALUE,
					"linecomment", KEY_META, "order", "22", KEY_END),
			keyNew ("user/tests/augeas-hosts/2/ipaddr", KEY_VALUE,
					"192.168.0.1", KEY_META, "order", "30", KEY_END),
			keyNew ("user/tests/augeas-hosts/2/canonical", KEY_VALUE, "host1",
					KEY_META, "order", "40", KEY_END),
			keyNew ("user/tests/augeas-hosts/2/alias[1]", KEY_VALUE,
					"host1alias1", KEY_META, "order", "50", KEY_END),
			keyNew ("user/tests/augeas-hosts/2/alias[2]", KEY_VALUE,
					"host1alias2", KEY_META, "order", "60", KEY_END),
			keyNew ("user/tests/augeas-hosts/3/ipaddr", KEY_VALUE,
					"fd00::4711:4712:2::1", KEY_META, "order", "70", KEY_END),
			keyNew ("user/tests/augeas-hosts/3/canonical", KEY_VALUE, "host2",
					KEY_META, "order", "80", KEY_END),
			keyNew ("user/tests/augeas-hosts/3/alias[1]", KEY_VALUE,
					"host2alias1", KEY_META, "order", "90", KEY_END),
			keyNew ("user/tests/augeas-hosts/3/alias[2]", KEY_VALUE,
					"host2alias2", KEY_META, "order", "100", KEY_END), KS_END);

	ksAppendKey (ks, parentKey);

	succeed_if(plugin->kdbSet (plugin, ks, parentKey) == 1,
			"kdbSet was not successful");
	succeed_if(output_error (parentKey), "error in kdbSet");
	succeed_if(output_warnings (parentKey), "warnings in kdbSet");

	succeed_if(
			compare_line_files (srcdir_file (fileName), keyString (parentKey)),
			"files do not match as expected");

	elektraUnlink(keyString (parentKey));

	ksDel (ks);

	PLUGIN_CLOSE ();
}

开发者ID:beku，项目名称:libelektra，代码行数:51，代码来源:testmod_augeas.c

示例17: test_formatNotAccepted

static void test_formatNotAccepted (const char * format)
{
	Key * parentKey = keyNew ("user/tests/simpleini", KEY_VALUE, elektraFilename (), KEY_END);
	KeySet * conf = ksNew (1, keyNew ("system/format", KEY_VALUE, format, KEY_END), KS_END);
	PLUGIN_OPEN ("simpleini");

	KeySet * ks = ksNew (0, KS_END);

	succeed_if (plugin->kdbGet (plugin, ks, parentKey) != 1, "kdbGet was successful for an invalid format");

	ksDel (ks);
	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:reox，项目名称:libelektra，代码行数:14，代码来源:testmod_simpleini.c

示例18: testreadwriteinvalid

static void testreadwriteinvalid (const char * file)
{
	Key * parentKey = keyNew ("user/tests/csvstorage", KEY_VALUE, srcdir_file (file), KEY_END);
	KeySet * conf = ksNew (10, keyNew ("system/delimiter", KEY_VALUE, ";", KEY_END), KS_END);
	KeySet * ks = ksNew (0, KS_END);
	PLUGIN_OPEN ("csvstorage");
	succeed_if (plugin->kdbGet (plugin, ks, parentKey) > 0, "call to kdbGet was not successful");
	succeed_if (!output_warnings (parentKey), "no warnings in kdbGet");
	keySetString (parentKey, elektraFilename ());
	succeed_if (plugin->kdbSet (plugin, ks, parentKey) == (-1), "error: wrote invalid data");
	ksDel (ks);
	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:reox，项目名称:libelektra，代码行数:14，代码来源:testmod_csvstorage.c

示例19: test_hostLensRead

void test_hostLensRead(char *fileName)
{
	Key *parentKey = keyNew ("user/tests/augeas-hosts", KEY_VALUE,
			srcdir_file (fileName), KEY_END);
	KeySet *conf = ksNew (20,
			keyNew ("system/lens", KEY_VALUE, "Hosts.lns", KEY_END), KS_END);
	PLUGIN_OPEN("augeas");

	KeySet *ks = ksNew(0, KS_END);

	succeed_if(plugin->kdbGet (plugin, ks, parentKey) >= 1,
			"call to kdbGet was not successful");
	succeed_if(output_error (parentKey), "error in kdbGet");
	succeed_if(output_warnings (parentKey), "warnings in kdbGet");

	Key *key = ksLookupByName (ks, "user/tests/augeas-hosts/1/ipaddr", 0);
	exit_if_fail(key, "ip address of localhost not found");
	succeed_if(strcmp ("127.0.0.1", keyValue (key)) == 0,
			"address of localhost not correct");

	key = ksLookupByName (ks, "user/tests/augeas-hosts/1/canonical", 0);
	exit_if_fail(key, "name of localhost not found");
	succeed_if(strcmp ("localhost", keyValue (key)) == 0,
			"name of localhost not correct");

	key = ksLookupByName (ks, "user/tests/augeas-hosts/2/ipaddr", 0);
	exit_if_fail(key, "ip address of host1 not found");
	succeed_if(strcmp ("192.168.0.1", keyValue (key)) == 0,
			"address of host1 not correct");

	key = ksLookupByName (ks, "user/tests/augeas-hosts/2/canonical", 0);
	exit_if_fail(key, "name of host1 not found");
	succeed_if(strcmp ("host1", keyValue (key)) == 0,
			"name of host1 not correct");

	key = ksLookupByName (ks, "user/tests/augeas-hosts/2/alias[1]", 0);
	exit_if_fail(key, "alias1 of host1 not found");
	succeed_if(strcmp ("alias1", keyValue (key)) == 0,
			"name of alias1 of host1 not correct");

	key = ksLookupByName (ks, "user/tests/augeas-hosts/2/alias[2]", 0);
	exit_if_fail(key, "alias2 of host1 not found");
	succeed_if(strcmp ("alias2", keyValue (key)) == 0,
			"name of alias2 of host1 not correct");

	PLUGIN_CLOSE();

	ksDel (ks);
	keyDel(parentKey);
}

开发者ID:beku，项目名称:libelektra，代码行数:50，代码来源:testmod_augeas.c

示例20: test_onlyFirstMatchIsApplied

void test_onlyFirstMatchIsApplied (void)
{
	Key * parentKey = keyNew ("user/tests/glob", KEY_END);
	// clang-format off
	KeySet * conf = ksNew (20,
				keyNew ("user/glob/#1",
						KEY_VALUE, "user/tests/glob/test1*",
						KEY_META, "testmetakey1", "testvalue1",
						KEY_END),
				keyNew ("user/glob/#2",
						KEY_VALUE, "user/tests/glob/*",
						KEY_META, "testmetakey2", "testvalue2",
						KEY_END),
			       /* disable all flags */
			    keyNew ("user/glob/#1/flags",
			    		KEY_VALUE, "",
						KEY_END),
				keyNew ("user/glob/#2/flags",
				   		KEY_VALUE, "",
						KEY_END),
				KS_END);
	// clang-format on
	PLUGIN_OPEN ("glob");

	KeySet * ks = createKeys ();

	succeed_if (plugin->kdbGet (plugin, ks, parentKey) >= 1, "call to kdbSet was not successful");
	succeed_if (output_error (parentKey), "error in kdbSet");
	succeed_if (output_warnings (parentKey), "warnings in kdbSet");

	Key * key = ksLookupByName (ks, "user/tests/glob/test1", 0);
	exit_if_fail (key, "key user/tests/glob/test1 not found");
	const Key * firstMatchKey = keyGetMeta (key, "testmetakey1");
	exit_if_fail (firstMatchKey, "testmetakey1 not found");
	const Key * secondMatchKey = keyGetMeta (key, "testmetakey2");
	exit_if_fail (!secondMatchKey, "testmetakey2 was applied to testmetakey1 although another match was already applied")

		key = ksLookupByName (ks, "user/tests/glob/test2/subtest1", 0);
	exit_if_fail (key, "user/tests/glob/test2/subtest1 not found");
	exit_if_fail (keyGetMeta (key, "testmetakey2"), "testmetakey2 not found");

	key = ksLookupByName (ks, "user/tests/glob/test3", 0);
	exit_if_fail (key, "user/tests/glob/test3 not found");
	exit_if_fail (keyGetMeta (key, "testmetakey2"), "testmetakey2 not found");

	ksDel (ks);
	keyDel (parentKey);
	PLUGIN_CLOSE ();
}

开发者ID:reox，项目名称:libelektra，代码行数:49，代码来源:testmod_glob.c

注：本文中的PLUGIN_CLOSE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PLUGIN_MAKE_VERSION函数代码示例发布时间：2022-05-30

C++ PLOGE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19274|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10014|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8341|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8709|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8655|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9684|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8643|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8011|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8680|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7547|2022-11-06

客服电话

电子邮件

C++ PLUGIN_CLOSE函数代码示例

示例1: test_setDirectionMatch

示例2: test_readline

示例3: test_readfstab

示例4: test_mmap_ksCopy

示例5: test_structure

示例6: test_mmap_opmphm

示例7: test_mmap_ks_copy_with_meta

示例8: test_mmap_metacopy

示例9: test_hostLensFormatting

示例10: test_differentMetaNames

示例11: test_hostLensDelete

示例12: testinvalid

示例13: testvalid

示例14: test_metaMerging

示例15: clearStorage

示例16: test_hostLensWrite

示例17: test_formatNotAccepted

示例18: testreadwriteinvalid

示例19: test_hostLensRead

示例20: test_onlyFirstMatchIsApplied

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

CVE-2022-36321

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053