C++ PLAY_SONG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PLAY_SONG函数的典型用法代码示例。如果您正苦于以下问题：C++ PLAY_SONG函数的具体用法？C++ PLAY_SONG怎么用？C++ PLAY_SONG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PLAY_SONG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: setLayer

void setLayer(int layer) {
    if (layer == _COLEMAK) {
        #ifdef AUDIO_ENABLE
            stop_all_notes();
            PLAY_SONG(marioe);
        #endif
        set_single_persistent_default_layer(_COLEMAK);
        #ifdef BACKLIGHT_ENABLE
            backlight_set(0);
        #endif
    } else if (layer == _GAME) {
        #ifdef AUDIO_ENABLE
            stop_all_notes();
            PLAY_SONG(mario);
        #endif
        set_single_persistent_default_layer(_GAME);
        #ifdef BACKLIGHT_ENABLE
            backlight_set(15);
        #endif
    } else if (layer == _MUSIC) {
        #ifdef AUDIO_ENABLE
            stop_all_notes();
            PLAY_SONG(guitar);
        #endif
        set_single_persistent_default_layer(_MUSIC);
        #ifdef BACKLIGHT_ENABLE
            backlight_set(1);
        #endif
    }
}

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:30，代码来源:keymap.c

示例2: led_set_user

void led_set_user( uint8_t usb_led )
{
  static uint8_t old_usb_led = 0;
  wait_ms( 10 ); /* gets rid of tick */

  if ( (usb_led & (1 << USB_LED_CAPS_LOCK) ) && !(old_usb_led & (1 << USB_LED_CAPS_LOCK) ) )  {
/* CAPS on */
    caps= true;
    rgblight_setrgb( 0,0,0 );
    rgblight_setrgb_at(RGB_Caps_Color,12);  // caps key
    #ifdef AUDIO_ENABLE
      PLAY_SONG( tone_caps );
    #endif
  }else if ( !(usb_led & (1 << USB_LED_CAPS_LOCK) ) && (old_usb_led & (1 << USB_LED_CAPS_LOCK) ) )  {

/* CAPS off */
    caps= false;
    if (RGB_TAP_STATE==false){
      rgblight_mode( RGB_LAYER0_mode );
    }else{
      rgblight_mode(1);
      rgblight_setrgb( 0,0,0 );
    }
    #ifdef AUDIO_ENABLE
      PLAY_SONG( tone_caps );
    #endif
  }
  old_usb_led = usb_led;
}  // End of led_set_user

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:29，代码来源:keymap.c

示例3: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case FUNC:
      if (record->event.pressed) {
        layer_on(_FUNC);
      } else {
        layer_off(_FUNC);
      }
      return false;
      break;
    case PLOVER:
      if (!record->event.pressed) {
        #ifdef AUDIO_ENABLE
          stop_all_notes();
          PLAY_SONG(plover_song);
        #endif
        layer_on(_PLOVER);
      }
      return false;
      break;
    case EXT_PLV:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_gb_song);
        #endif
        layer_off(_PLOVER);
      }
      return false;
      break;
    case MOUSE:
      if (record->event.pressed) {
        layer_on(_MOUSE);
      } else {
        layer_off(_MOUSE);
      }
      return false;
      break;
  }
  return true;
}

开发者ID:UnderSampled，项目名称:qmk_firmware，代码行数:60，代码来源:keymap.c

示例4: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(tone_qwerty);
        #endif
        persistent_default_layer_set(1UL<<_QWERTY);
      }
      return false;
      break;
    case COLEMAK:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(tone_colemak);
        #endif
        persistent_default_layer_set(1UL<<_COLEMAK);
      }
      return false;
      break;
    case DVORAK:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(tone_dvorak);
        #endif
        persistent_default_layer_set(1UL<<_DVORAK);
      }
      return false;
      break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case ADJUST:
      if (record->event.pressed) {
        layer_on(_ADJUST);
      } else {
        layer_off(_ADJUST);
      }
      return false;
      break;
  }
  return true;
}

开发者ID:adamclerk，项目名称:qmk_firmware，代码行数:60，代码来源:keymap.c

示例5: dip_update

void dip_update(uint8_t index, bool active) {
  switch (index) {
    case 0:
      if (active) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_song);
        #endif
        layer_on(_ADJUST);
      } else {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_gb_song);
        #endif
        layer_off(_ADJUST);
      }
      break;
    case 1:
      if (active) {
        muse_mode = true;
      } else {
        muse_mode = false;
        #ifdef AUDIO_ENABLE
          stop_all_notes();
        #endif
      }
      break;
    case 3:
      if (active) {
        clicky_on();
      } else {
        clicky_off();
      }
   }
}

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:33，代码来源:keymap.c

示例6: default_layer_state_set_kb

uint32_t default_layer_state_set_kb(uint32_t state) {
    if (state == 1UL<<_QWERTY) {
      PLAY_SONG(tone_qwerty);
    } else if (state == 1UL<<_NUMPAD) {
      PLAY_SONG(tone_numpad);
    }    
    return state;
}

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:8，代码来源:keymap.c

示例7: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case DVORAK:
      if (record->event.pressed) {
        set_single_persistent_default_layer(_DVORAK);
      }
      return false;
      break;
    case BACKLIT:
      if (record->event.pressed) {
        register_code(KC_RSFT);
        #ifdef BACKLIGHT_ENABLE
          backlight_step();
        #endif
        #ifdef KEYBOARD_planck_rev5
          PORTE &= ~(1<<6);
        #endif
      } else {
        unregister_code(KC_RSFT);
        #ifdef KEYBOARD_planck_rev5
          PORTE |= (1<<6);
        #endif
      }
      return false;
      break;
    case PLOVER:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          stop_all_notes();
          PLAY_SONG(plover_song);
        #endif
        layer_off(_CUSTOM);
        layer_off(_RAISE);
        layer_off(_LOWER);
        layer_off(_ADJUST);
        layer_on(_PLOVER);
        if (!eeconfig_is_enabled()) {
            eeconfig_init();
        }
        keymap_config.raw = eeconfig_read_keymap();
        keymap_config.nkro = 1;
        eeconfig_update_keymap(keymap_config.raw);
      }
      return false;
      break;
    case EXT_PLV:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_gb_song);
        #endif
        layer_off(_PLOVER);
      }
      return false;
      break;
  }
  return true;
}

开发者ID:david-pitty，项目名称:planck_layout，代码行数:57，代码来源:keymap.c

示例8: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(tone_qwerty);
        #endif
        persistant_default_layer_set(1UL<<_QWERTY);
      }
      return false;
      break;
    case GAME:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(music_scale);
        #endif
        persistant_default_layer_set(1UL<<_GAME);
      }
      return false;
      break;


      case LOWER:
        if (record->event.pressed) {
          layer_on(_LOWER);
          update_tri_layer(_LOWER, _RAISE, _ADJUST);
        } else {
          layer_off(_LOWER);
          update_tri_layer(_LOWER, _RAISE, _ADJUST);
        }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case BACKLIT:
      if (record->event.pressed) {
        register_code(KC_RSFT);
        #ifdef BACKLIGHT_ENABLE
          backlight_step();
        #endif
      } else {
        unregister_code(KC_RSFT);
      }
      return false;
      break;
     }
  return true;
}

开发者ID:ScrelliCopter，项目名称:qmk_firmware，代码行数:56，代码来源:keymap.c

示例9: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        print("mode just switched to qwerty and this is a huge string\n");
        set_single_persistent_default_layer(_QWERTY);
      }
      return false; break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false; break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false; break;
    case PLOVER:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          stop_all_notes();
          PLAY_SONG(plover_song);
        #endif
        layer_off(_RAISE);
        layer_off(_LOWER);
        layer_off(_ADJUST);
        layer_on(_PLOVER);
        if (!eeconfig_is_enabled()) {
            eeconfig_init();
        }
        keymap_config.raw = eeconfig_read_keymap();
        keymap_config.nkro = 1;
        eeconfig_update_keymap(keymap_config.raw);
      }
      return false; break;
    case EXT_PLV:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(plover_gb_song);
        #endif
        layer_off(_PLOVER);
      }
      return false; break;
  }
  return true;
}

开发者ID:0tsuki，项目名称:qmk_firmware，代码行数:55，代码来源:keymap.c

示例10: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
    switch (keycode) {
        case S_BSKTC:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_basketcase);
            }
            return false;
        case S_ODEJY:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_ode_to_joy);
            }
            return false;
        case S_RCKBY:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_rock_a_bye_baby);
            }
            return false;
        case S_DOEDR:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_doe_a_deer);
            }
            return false;
        case S_SCALE:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_scale);
            }
            return false;
        case S_ONEUP:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_one_up);
            }
            return false;
        case S_COIN:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_coin);
            }
            return false;
        case S_SONIC:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_sonic_ring);
            }
            return false;
        case S_ZELDA:
            if (record->event.pressed) {
                stop_all_notes();
                PLAY_SONG(song_zelda_puzzle);
            }
            return false;
    }
    return true;
}

开发者ID:Talljoe，项目名称:qmk_firmware，代码行数:59，代码来源:keymap.c

示例11: action_function

void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
	if (record->event.pressed) {
		switch (id) {
			case 0:
				PLAY_SONG(tone_startup);
				break;
			case 1:
				PLAY_SONG(music_scale);
				break;
			case 2:
				PLAY_SONG(tone_goodbye);
				break;
		}
	}
};

开发者ID:U47，项目名称:qmk_firmware，代码行数:15，代码来源:keymap.c

示例12: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case STENO:
      if (record->event.pressed) {
#ifdef AUDIO_ENABLE
        stop_all_notes();
        PLAY_SONG(plover_song);
#endif
        layer_off(RAISE_LAYER);
        layer_off(LOWER_LAYER);
        layer_off(ADJUST_LAYER);
        layer_on(STENO_LAYER);
        if (!eeconfig_is_enabled()) {
          eeconfig_init();
        }
        keymap_config.raw = eeconfig_read_keymap();
        keymap_config.nkro = 1;
        eeconfig_update_keymap(keymap_config.raw);
        plover_resume();
      }
      return false;
    case PV_EXIT:
      if (record->event.pressed) {
#ifdef AUDIO_ENABLE
        PLAY_SONG(plover_gb_song);
#endif
        plover_suspend();
        layer_off(STENO_LAYER);
      }
      return false;
    case PV_LOOK:
      if (record->event.pressed) {
        plover_lookup();
      }
      return false;
    case SEND_VERSION:
      if (record->event.pressed) {
        SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP "@" QMK_VERSION " (" QMK_BUILDDATE ")");
      }
      return false;
    case SEND_MAKE:
      if (record->event.pressed) {
        SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP ":dfu\n");
      }
      return false;
  }
  return true;
}

开发者ID:algernon，项目名称:qmk_firmware，代码行数:48，代码来源:keymap.c

示例13: audio_off

void audio_off(void) {
    PLAY_SONG(audio_off_song);
    wait_ms(100);
    stop_all_notes();
    audio_config.enable = 0;
    eeconfig_update_audio(audio_config.raw);
}

开发者ID:UnderSampled，项目名称:qmk_firmware，代码行数:7，代码来源:audio.c

示例14: set_single_persistent_default_layer

void set_single_persistent_default_layer(uint8_t default_layer) {
  #ifdef AUDIO_ENABLE
    PLAY_SONG(default_layer_songs[default_layer]);
  #endif
  eeconfig_update_default_layer(1U<<default_layer);
  default_layer_set(1U<<default_layer);
}

开发者ID:bdprice，项目名称:qmk_firmware，代码行数:7，代码来源:quantum.c

示例15: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case LOWER:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(tone_coin);
        #endif
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _KEYBOARD);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _KEYBOARD);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _KEYBOARD);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _KEYBOARD);
      }
      return false;
      break;
    case KC_RGUI:
      // set to pressed
      RGUI_PRESSED = record->event.pressed;
      // if left gui pressed and right gui pressed
      // turn on cap layer
      if (LGUI_PRESSED && RGUI_PRESSED) {
        // remove left gui mod
        unregister_code(KC_LGUI);
        layer_on(_CAP);
        // don't send gui in this case
        return false;
      } else {
        // if not both gui keys are pressed
        // then ensure cap layer is off
        layer_off(_CAP);
        // send gui button
        return true;
      }
      break;
    case KC_LGUI:
      // same as above
      LGUI_PRESSED = record->event.pressed;
      if (LGUI_PRESSED && RGUI_PRESSED) {
        // remove right gui mod
        unregister_code(KC_RGUI);
        layer_on(_CAP);
        return false;
      } else {
        layer_off(_CAP);
        return true;
      }
      break;
  }
  return true;
}

开发者ID:BerkeleyTrue，项目名称:dotfiles，代码行数:60，代码来源:keymap.c

示例16: shutdown_user

void shutdown_user() {
#ifdef AUDIO_ENABLE
  PLAY_SONG(tone_goodbye);
  _delay_ms(150);
  stop_all_notes();
#endif
}

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:7，代码来源:keymap.c

示例17: reset_keyboard

void reset_keyboard(void) {
  clear_keyboard();
#if defined(MIDI_ENABLE) && defined(MIDI_BASIC)
  process_midi_all_notes_off();
#endif
#ifdef AUDIO_ENABLE
  #ifndef NO_MUSIC_MODE
    music_all_notes_off();
  #endif
  uint16_t timer_start = timer_read();
  PLAY_SONG(goodbye_song);
  shutdown_user();
  while(timer_elapsed(timer_start) < 250)
    wait_ms(1);
  stop_all_notes();
#else
  shutdown_user();
  wait_ms(250);
#endif
// this is also done later in bootloader.c - not sure if it's neccesary here
#ifdef BOOTLOADER_CATERINA
  *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
#endif
  bootloader_jump();
}

开发者ID:kipricker，项目名称:qmk_firmware，代码行数:25，代码来源:quantum.c

示例18: startup_user

void startup_user() {
  _delay_ms(20); // gets rid of tick
  set_unicode_input_mode(UC_LNX);
#ifdef AUDIO_ENABLE
  PLAY_SONG(tone_startup);
#endif
}

开发者ID:0xdec，项目名称:qmk_firmware，代码行数:7，代码来源:keymap.c

示例19: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case NERD:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_SONG(tone_nerd);
        #endif
        persistent_default_layer_set(1UL<<_NERD);
      }
      return false;
      break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
  }
  return true;
}

开发者ID:ScrelliCopter，项目名称:qmk_firmware，代码行数:34，代码来源:keymap.c

示例20: set_qwerty

void set_qwerty(void) {
#ifdef AUDIO_ENABLE
    stop_all_notes();
    PLAY_SONG(qwerty_song);
#endif
    set_single_persistent_default_layer(_QWERTY);
}

开发者ID:hot-leaf-juice，项目名称:qmk_firmware，代码行数:7，代码来源:keymap.c

注：本文中的PLAY_SONG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PLL_Init函数代码示例发布时间：2022-05-30

C++ PLAY_NOTE_ARRAY函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19274|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10014|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8341|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8709|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8655|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9684|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8643|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8011|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8680|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7547|2022-11-06

客服电话

电子邮件

C++ PLAY_SONG函数代码示例

示例1: setLayer

示例2: led_set_user

示例3: process_record_user

示例4: process_record_user

示例5: dip_update

示例6: default_layer_state_set_kb

示例7: process_record_user

示例8: process_record_user

示例9: process_record_user

示例10: process_record_user

示例11: action_function

示例12: process_record_user

示例13: audio_off

示例14: set_single_persistent_default_layer

示例15: process_record_user

示例16: shutdown_user

示例17: reset_keyboard

示例18: startup_user

示例19: process_record_user

示例20: set_qwerty

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

CVE-2022-36321

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053