• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ PIN_ERR_IS_ERR函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中PIN_ERR_IS_ERR函数的典型用法代码示例。如果您正苦于以下问题:C++ PIN_ERR_IS_ERR函数的具体用法?C++ PIN_ERR_IS_ERR怎么用?C++ PIN_ERR_IS_ERR使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了PIN_ERR_IS_ERR函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: fm_bal_pol_get_bal_grp_and_svc

/********************************************************************
 * fm_bal_pol_get_bal_grp_and_svc()
 ********************************************************************/
static void 
fm_bal_pol_get_bal_grp_and_svc(
	pcm_context_t           *ctxp,
	int			flags,
	pin_flist_t 		*i_flistp,
	pin_flist_t 		*r_flistp,
	pin_errbuf_t            *ebufp)
{
	int             err = PIN_ERR_NONE;
	

	if (PIN_ERR_IS_ERR(ebufp))
	{
		return ;
	}
        PIN_ERR_CLEAR_ERR(ebufp);


	if (PIN_ERR_IS_ERR(ebufp)){
		/***************************************************
		 * Log Error Buffer and return.
		 ***************************************************/
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"fm_bal_pol_get_bal_grp_and_svc error", ebufp);
	}
	return ;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:30,代码来源:fm_bal_pol_get_bal_grp_and_svc.c


示例2: fm_cust_pol_set_brandinfo

static void
fm_cust_pol_set_brandinfo(
	pcm_context_t		*ctxp,
	int32			opflags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**r_flistpp,
	pin_errbuf_t		*ebufp)
{
	/*
	 * If there are pending errors, then short circuit immediately
	 */
        if (PIN_ERR_IS_ERR(ebufp))
                return;
        PIN_ERR_CLEAR_ERR(ebufp);

	/* Attempt to set the brand name */
	fm_cust_pol_set_brandname(ctxp, opflags, i_flistp, r_flistpp, ebufp);

	/* If there's no pending errors, then just use what we got */
	if(!PIN_ERR_IS_ERR(ebufp)) {
		*r_flistpp = PIN_FLIST_COPY(i_flistp, ebufp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:25,代码来源:fm_cust_pol_set_brandinfo.c


示例3: fm_cust_pol_get_config

/*******************************************************************
 * fm_cust_pol_get_config()
 *
 *	Policy that takes the incoming flist of info contained
 *	on an srvc array and other, and adds more information and
 *	sends out the config information in big flist.
 *
 *******************************************************************/
static void
fm_cust_pol_get_config(
	pcm_context_t		*ctxp,
	pin_flist_t		*in_flistp,
	pin_flist_t		**out_flistpp,
        pin_errbuf_t		*ebufp)
{
	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Copy the incoming flist.
	 ***********************************************************/
	*out_flistpp = PIN_FLIST_COPY(in_flistp, ebufp);

	/***********************************************************
	 * Add the file configed parameters.
	 ***********************************************************/
	fm_cust_pol_read_config(*out_flistpp, in_flistp, ebufp);

	/***********************************************************
	 * Error?
	 ***********************************************************/
	if(PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"fm_cust_pol_get_config error", ebufp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:39,代码来源:fm_cust_pol_get_config.c


示例4: fm_price_pol_prep_dependency

/*******************************************************************
 * fm_price_pol_prep_dependency():
 *
 *	Prepare the given dependency flist for database insertion.
 *
 *	XXX NOOP - STUBBED PROTOTYPE ONLY XXX
 *
 *******************************************************************/
void
fm_price_pol_prep_dependency(
	pcm_context_t		*ctxp,
	u_int32			flags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**o_flistpp,
        pin_errbuf_t		*ebufp)
{
	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/*
	 * Copy the input to output
	 */

	*o_flistpp = PIN_FLIST_COPY(i_flistp, ebufp);


	/*
	 * Error?
	 */
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"fm_price_pol_prep_dependency error", ebufp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:37,代码来源:fm_price_pol_prep_dependency.c


示例5: op_device_pol_set_state

/*******************************************************************
 * Main routine for the PCM_OP_DEVICE_POL_SET_STATE operation.
 *******************************************************************/
void
op_device_pol_set_state(
	cm_nap_connection_t	*connp,
	int32			opcode,
	int32			flags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**r_flistpp,
	pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;
	pin_flist_t	*r_flistp = NULL;

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Null out results
	 ***********************************************************/
	*r_flistpp = NULL;

	/***********************************************************
	 * Insanity check.
	 ***********************************************************/
	if (opcode != PCM_OP_DEVICE_POL_SET_STATE) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_device_pol_set_state opcode error", ebufp);

		return;
	}
	
	/***********************************************************
	 * Debut what we got.
         ***********************************************************/
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_device_pol_set_state input flist", i_flistp);

	/***********************************************************
	 * Main rountine for this opcode
	 ***********************************************************/
	fm_device_pol_set_state(ctxp, flags, i_flistp, r_flistpp, ebufp);
	
	/***********************************************************
	 * Error?
	 ***********************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_FLIST_DESTROY_EX(r_flistpp, ebufp);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_device_pol_set_state error", ebufp);
	} else {
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_device_pol_set_state output flist", *r_flistpp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:62,代码来源:fm_device_pol_set_state.c


示例6: op_bill_pol_get_pending_items

/*******************************************************************
 * PCM_OP_BILL_POL_GET_PENDING_ITEMS 
 *
 * This policy provides a hook to the Bill Now opcode for selecting 
 * the Pending Items to be included in the Bill. The default 
 * implementation select all the Pending Items to be included in the
 * Bill.
 *******************************************************************/
void 
op_bill_pol_get_pending_items(
	cm_nap_connection_t	*connp,
	int32			opcode,
	int32			flags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**r_flistpp,
	pin_errbuf_t		*ebufp)
{
	void		*vp = NULL;
	pcm_context_t	*ctxp = connp->dm_ctx;
	
	*r_flistpp = NULL;
	
	if (PIN_ERR_IS_ERR(ebufp)) {
		return;
	}
	PIN_ERR_CLEAR_ERR(ebufp);

	/*******************************************************************
	 * Insanity Check 
	 *******************************************************************/
	if (opcode != PCM_OP_BILL_POL_GET_PENDING_ITEMS) {
		pin_set_err(ebufp, PIN_ERRLOC_FM, 
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_bill_pol_get_pending_items error",
			ebufp);
		return;
	}

	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG, 
		"op_bill_pol_get_pending_items input flist", i_flistp);

	/*******************************************************************
	 * Call the function in order to get pending items to be included
	 *  into the Bill Now. 
	 *******************************************************************/
	fm_bill_pol_get_pending_items(ctxp, i_flistp, r_flistpp, ebufp);
	
	 /******************************************************************
         * Set account poid and bill_type to the output flist.
         ******************************************************************/
	
	vp = PIN_FLIST_FLD_GET(i_flistp, PIN_FLD_POID, 0, ebufp);
	PIN_FLIST_FLD_SET(*r_flistpp, PIN_FLD_POID, vp, ebufp);
	
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR, 
			"op_bill_pol_get_pending_items error", ebufp);
	}
	else {
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG, 
		"op_bill_pol_get_pending_items output flist", *r_flistpp);
	}
	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:66,代码来源:fm_bill_pol_get_pending_items.c


示例7: fm_cust_pol_valid_passwd

/*******************************************************************
 * fm_cust_pol_valid_passwd()
 *
 *	Validate the given passwd according to the given poid type.
 *
 *******************************************************************/
static void
fm_cust_pol_valid_passwd(
	pcm_context_t		*ctxp,
	pin_flist_t		*in_flistp,
	pin_flist_t		**out_flistpp,
        pin_errbuf_t		*ebufp)
{
	pin_flist_t		*r_flistp = NULL;

	poid_t			*o_pdp;
	const char		*o_type = NULL;

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Create outgoing flist
	 ***********************************************************/
	r_flistp = PIN_FLIST_CREATE(ebufp);
	*out_flistpp = r_flistp;

	/***********************************************************
	 * Get (and add) the object poid.
	 ***********************************************************/
	o_pdp = (poid_t *)PIN_FLIST_FLD_GET(in_flistp, PIN_FLD_POID, 0, ebufp);
	PIN_FLIST_FLD_SET(r_flistp, PIN_FLD_POID, (void *)o_pdp, ebufp);

	/***********************************************************
	 * We might have different rules for different services.
	 ***********************************************************/
	o_type = PIN_POID_GET_TYPE(o_pdp);

	if (!strncmp(o_type, "/service", 8)) {

		/* Any service password */
		fm_cust_pol_valid_pwd_srvc(ctxp, in_flistp, r_flistp, ebufp);

	} else {

		/* Error - unknown/usupported type */
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_POID_TYPE, PIN_FLD_POID, 0, 0);

	}

	/***********************************************************
	 * Error?
	 ***********************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"fm_cust_pol_valid_passwd error", ebufp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:63,代码来源:fm_cust_pol_valid_passwd.c


示例8: op_cust_pol_get_config

/*******************************************************************
 * Main routine for the PCM_OP_CUST_POL_GET_CONFIG operation.
 *******************************************************************/
void
op_cust_pol_get_config(
        cm_nap_connection_t	*connp,
	u_int			opcode,
        u_int			flags,
        pin_flist_t		*in_flistp,
        pin_flist_t		**ret_flistpp,
        pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;
	pin_flist_t		*r_flistp = NULL;

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Insanity check.
	 ***********************************************************/
	if (opcode != PCM_OP_CUST_POL_GET_CONFIG) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"bad opcode in op_cust_pol_get_config",  ebufp);
		return;
	}

	/***********************************************************
	 * Debug: What did we get?
	 ***********************************************************/
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_cust_pol_get_config input flist", in_flistp);

	/***********************************************************
	 * Call main function to do it
	 ***********************************************************/
	fm_cust_pol_get_config(ctxp, in_flistp, &r_flistp, ebufp);

	/***********************************************************
	 * Results.
	 ***********************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		*ret_flistpp = (pin_flist_t *)NULL;
		PIN_FLIST_DESTROY(r_flistp, NULL);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_cust_pol_get_config error", ebufp);
	} else {
		*ret_flistpp = r_flistp;
		PIN_ERR_CLEAR_ERR(ebufp);
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_cust_pol_get_config return flist", r_flistp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:59,代码来源:fm_cust_pol_get_config.c


示例9: op_act_pol_post_authorize

/*******************************************************************
 * PCM_OP_ACT_POL_POST_AUTHORIZE  
 *******************************************************************/
void 
op_act_pol_post_authorize(
	cm_nap_connection_t	*connp,
	int32			opcode,
	int32			flags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**r_flistpp,
	pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;

	*r_flistpp = NULL;
	
	if (PIN_ERR_IS_ERR(ebufp)) {
		return;
	}
	PIN_ERR_CLEAR_ERR(ebufp);

	/*******************************************************************
	 * Insanity Check 
	 *******************************************************************/
	if (opcode != PCM_OP_ACT_POL_POST_AUTHORIZE) {
		pin_set_err(ebufp, PIN_ERRLOC_FM, 
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_act_pol_post_authorize error",
			ebufp);
		return;
	}

	/*******************************************************************
	 * Debug: Input flist 
	 *******************************************************************/
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG, 
		"op_act_pol_post_authorize input flist", i_flistp);
	
	/*******************************************************************
	 * Call the default implementation 
	 *******************************************************************/
	fm_act_pol_post_authorize(ctxp, flags, i_flistp, r_flistpp, ebufp);

	/*******************************************************************
	 * Errors? 
	 *******************************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR, 
			"op_act_pol_post_authorize error", ebufp);
	}
	else {
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG, 
			"op_act_pol_post_authorize output flist", 
			*r_flistpp);
	}
	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:59,代码来源:fm_act_pol_post_authorize.c


示例10: op_bill_pol_reverse_payment

/*******************************************************************
 * Main routine for PCM_OP_BILL_POL_REVERSE_PAYMENT  
 *******************************************************************/
void
op_bill_pol_reverse_payment(
	cm_nap_connection_t	*connp,
	int			opcode,
	int			flags,
	pin_flist_t		*in_flistp,
	pin_flist_t		**ret_flistpp,
	pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;

	if (PIN_ERR_IS_ERR(ebufp)) {
		return;
	}
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Null out results until we have some.
	 ***********************************************************/
	*ret_flistpp = (pin_flist_t *)NULL;

	/***********************************************************
	 * Insanity check.
	 ***********************************************************/
	if (opcode != PCM_OP_BILL_POL_REVERSE_PAYMENT) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"bad opcode in op_bill_pol_reverse_payment", ebufp);
		return;
	}

	/***********************************************************
	 * Debug: What did we get?
	 ***********************************************************/
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_bill_pol_reverse_payment input flist", in_flistp);
	
	fm_bill_pol_reverse_payment(ctxp, flags, in_flistp, ret_flistpp, ebufp);	

	/***********************************************************
	* Results.
	***********************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_bill_pol_reverse_payment error", ebufp);
	} else {
		PIN_ERR_CLEAR_ERR(ebufp);
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_bill_pol_reverse_payment return flist", 
			*ret_flistpp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:59,代码来源:fm_bill_pol_reverse_payment.c


示例11: op_rate_pol_get_taxcode

/*******************************************************************
 * Main routine for the PCM_OP_RATE_POL_GET_TAXCODE operation.
 *******************************************************************/
void
op_rate_pol_get_taxcode(
        cm_nap_connection_t	*connp,
	u_int			opcode,
        u_int			flags,
        pin_flist_t		*i_flistp,
        pin_flist_t		**o_flistpp,
        pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;

	if (PIN_ERR_IS_ERR(ebufp)) {
		return;
	}
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Insanity check.
	 ***********************************************************/
	if (opcode != PCM_OP_RATE_POL_GET_TAXCODE) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_rate_pol_get_taxcode opcode error", ebufp);
		return;
		/*****/
	}

	/***********************************************************
	 * Debug: What we got.
	 ***********************************************************/
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_rate_pol_get_taxcode input flist", i_flistp);

	/***********************************************************
	 * Do the actual op in a sub.
	 ***********************************************************/
	fm_rate_pol_get_taxcode(ctxp, i_flistp, o_flistpp, ebufp);

	/***********************************************************
	 * Error?
	 ***********************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_rate_pol_get_taxcode error", ebufp);
	} else {
		/***************************************************
		 * Debug: What we're sending back.
		 ***************************************************/
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		  "op_rate_pol_get_taxcode return flist", *o_flistpp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:59,代码来源:fm_rate_pol_tax_code.c


示例12: op_price_pol_prep_dependency

/*******************************************************************
 * Main routine for the PCM_OP_PRICE_POL_PREP_DEPENDENCY  command
 *******************************************************************/
EXPORT_OP void
op_price_pol_prep_dependency(
        cm_nap_connection_t	*connp,
	u_int32			opcode,
        u_int32			flags,
        pin_flist_t		*i_flistp,
        pin_flist_t		**o_flistpp,
        pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;
	pin_flist_t		*r_flistp = NULL;

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/*
	 * Null out results until we have some.
	 */
	*o_flistpp = NULL;

	/*
	 * Insanity check.
	 */
	if (opcode != PCM_OP_PRICE_POL_PREP_DEPENDENCY) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"bad opcode in op_price_pol_prep_dependency", ebufp);
		return;
	}

	/*
	 * Do the actual prep in a lower routine
	 */
	fm_price_pol_prep_dependency(ctxp, flags, i_flistp, &r_flistp, ebufp);

	/*
	 * Results.
	 */
	if (PIN_ERR_IS_ERR(ebufp)) {
		*o_flistpp = (pin_flist_t *)NULL;
		PIN_FLIST_DESTROY(r_flistp, NULL);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_price_pol_prep_dependency error", ebufp);
	} else {
		*o_flistpp = r_flistp;
		PIN_ERR_CLEAR_ERR(ebufp);
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_price_pol_prep_dependency return flist", r_flistp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:58,代码来源:fm_price_pol_prep_dependency.c


示例13: op_cust_pol_prep_topup

/*******************************************************************
 * Main routine for the PCM_OP_CUST_POL_PREP_TOPUP operation
 *******************************************************************/
void
op_cust_pol_prep_topup(
        cm_nap_connection_t     *connp,
        int32                   opcode,
        int32                   flags,
        pin_flist_t             *i_flistp,
        pin_flist_t             **r_flistpp,
        pin_errbuf_t            *ebufp)
{
        pcm_context_t           *ctxp = connp->dm_ctx;

        if (PIN_ERR_IS_ERR(ebufp))
                return;
        PIN_ERR_CLEAR_ERR(ebufp);

        /*
         * Null out results until we have some.
         */
        *r_flistpp = NULL;

        /*
         * Insanity check.
         */

        if (opcode != PCM_OP_CUST_POL_PREP_TOPUP) {
                pin_set_err(ebufp, PIN_ERRLOC_FM,
                        PIN_ERRCLASS_SYSTEM_DETERMINATE,
                        PIN_ERR_BAD_OPCODE, 0, 0, opcode);
                PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
                        "bad opcode in op_cust_pol_prep_topup", ebufp);
                return;
        }


        PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
                          "op_cust_pol_prep_topup input flist:",
                          i_flistp);

        /*
         * Call the main function.
         */
        fm_cust_pol_prep_topup(ctxp, flags, i_flistp, r_flistpp, ebufp);

        PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
                          "op_cust_pol_prep_topup output flist:",
                          *r_flistpp);


        if (PIN_ERR_IS_ERR(ebufp))
                PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
                                 "op_cust_pol_prep_topup flist error",
                                 ebufp);

        return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:58,代码来源:fm_cust_pol_prep_topup.c


示例14: op_bill_pol_post_billing

/*******************************************************************
 * Main routine for the PCM_OP_BILL_POL_POST_BILLING
 *******************************************************************/
void
op_bill_pol_post_billing(
	cm_nap_connection_t	*connp,
	int32			opcode,
	int32			flags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**r_flistpp,
	pin_errbuf_t		*ebufp)
{
	pcm_context_t           *ctxp = connp->dm_ctx;
	void			*vp = NULL;

	*r_flistpp = NULL;

	if (PIN_ERR_IS_ERR(ebufp)) {
		return;
	}
	PIN_ERR_CLEAR_ERR(ebufp);

	/*******************************************************************
	 * Insanity check.
	 *******************************************************************/
	if (opcode != PCM_OP_BILL_POL_POST_BILLING) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_bill_pol_post_billing bad opcode error", 
			ebufp);
		return;
	}

	/*******************************************************************
	 * Debug: What we got.
	 *******************************************************************/
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_bill_pol_post_billing input flist", i_flistp);


	/*******************************************************************
	 * Call the default implementation in order to stop billing of the 
	 * closed accounts
	 *******************************************************************/
	fm_bill_pol_stop_billing(ctxp, flags, i_flistp, r_flistpp, ebufp);

	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
		"op_bill_pol_post_billing error", ebufp);
	} else {

		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_bill_pol_post_billing output flist", *r_flistpp);
	}
	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:58,代码来源:fm_bill_pol_post_billing.c


示例15: op_cust_pol_tax_init

/*******************************************************************
 * Main routine for the PCM_OP_CUST_POL_TAX_INIT command
 *******************************************************************/
void
op_cust_pol_tax_init(
	cm_nap_connection_t	*connp,
	int32			opcode,
	int32			flags,
	pin_flist_t		*in_flistp,
	pin_flist_t		**out_flistpp,
	pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/*
	 * Insanity check.
	 */
	if (opcode != PCM_OP_CUST_POL_TAX_INIT) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_cust_pol_tax_init opcode error", ebufp);
		return;
	}

	/*
	 * Debug - What we got.
	 */
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_cust_pol_tax_init input flist", in_flistp);

	/*
	 * Do the actual op in a sub. 
	 */
	fm_cust_pol_tax_init(ctxp, in_flistp, out_flistpp, ebufp);

	/*
	 * Error?
	 */
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_DEBUG,
			"op_cust_pol_tax_init error", ebufp);
	} else {
		/*
		 * Debug: What we're sending back.
		 */
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_cust_pol_tax_init return flist", *out_flistpp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:57,代码来源:fm_cust_pol_tax_init.c


示例16: fm_cust_pol_valid_pwd_srvc

/*******************************************************************
 * fm_cust_pol_valid_pwd_srvc():
 *
 *	Validate the service level password.
 *
 *******************************************************************/
static void
fm_cust_pol_valid_pwd_srvc(
	pcm_context_t		*ctxp,
	pin_flist_t		*i_flistp,
	pin_flist_t		*r_flistp,
        pin_errbuf_t		*ebufp)
{
	u_int			result;
        const char              *pwd = NULL;

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	/***********************************************************
	 * Pass by default.
	 ***********************************************************/
	result = PIN_CUST_VERIFY_PASSED;
	PIN_FLIST_FLD_SET(r_flistp, PIN_FLD_RESULT, (void *)&result, ebufp);

	pwd = PIN_FLIST_FLD_GET(i_flistp, PIN_FLD_PASSWD_CLEAR, 0, ebufp); 
	if (pwd && !strncmp(pwd, FM_PWD_INVALID_PASSWD, strlen(FM_PWD_INVALID_PASSWD))) {
		PIN_ERR_LOG_MSG(PIN_ERR_LEVEL_ERROR, " Invalid Password."); 
		pin_errbuf_set_err( ebufp, PIN_ERRLOC_FM, PIN_ERRCLASS_SYSTEM_DETERMINATE,
                                     PIN_ERR_VALIDATION_FAILED, 0, 0, 0, PIN_DOMAIN_ERRORS,
                                     PIN_ERR_VALIDATE_PASSWORD,1, 0, NULL);
		goto cleanup;
		/***********/
	}



	/***********************************************************
	 * If it's there, is it too long?
         * Try to validate based on /config/fld_validate (Pswd) obj.
         ***********************************************************/
	fm_cust_pol_validate_fld_value( ctxp, i_flistp, i_flistp, r_flistp,
		PIN_FLD_PASSWD_CLEAR,
		0,              /* element_id   */
		"Pswd",
		1,
		ebufp);

cleanup:
	/***********************************************************
	 * Error?
	 ***********************************************************/
	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"fm_cust_pol_valid_pwd_srvc error", ebufp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:60,代码来源:fm_cust_pol_valid_passwd.c


示例17: fm_validate_existence_and_get

/************************************************************************
 * fm_validate_existence_and_get ()
 *
 *   	Function to validate the existence of a field.  If a null
 *	pointer was found, an error is returned.  If not, then the
 *      (pointer to the) value is returned.
 *
 ************************************************************************/
void
fm_validate_existence_and_get(
pin_flist_t	*flistp,		/* Pointer to input flist	*/
int		partial,		/* If set, no mandatory fields  */
u_int		pin_fld_field_num,	/* Field currently checked	*/
void		**valpp,  		/* Set if empty field found	*/
pin_errbuf_t	*ebufp)			/* Error buffer pointer		*/

{
	void	*vp = NULL;			/* Void pointer			*/

	if (PIN_ERR_IS_ERR(ebufp))
		return;
	PIN_ERR_CLEAR_ERR(ebufp);

	if (partial) {
		vp = PIN_FLIST_FLD_GET(flistp, pin_fld_field_num, 1, ebufp);
	} else {
		vp = PIN_FLIST_FLD_GET(flistp, pin_fld_field_num, 0, ebufp);
	}

	if ( (vp == (void *)NULL)  && !partial) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			    PIN_ERRCLASS_SYSTEM_DETERMINATE, 
			    PIN_ERR_MISSING_ARG,
			    pin_fld_field_num, 0, 0);
                PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
				 "fm_validate_existence(): NULL ptr.", ebufp);
	}
	*valpp = vp;
	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:40,代码来源:fm_cust_pol_valid_all.c


示例18: op_cust_pol_set_brandinfo

void
op_cust_pol_set_brandinfo(
	cm_nap_connection_t	*connp,
	int32			opcode,
	int32			opflags,
	pin_flist_t		*i_flistp,
	pin_flist_t		**r_flistpp,
	pin_errbuf_t		*ebufp)
{
        pcm_context_t           *ctxp = connp->dm_ctx;

	/*
	 * If there are pending errors, then short circuit immediately
	 */
        if (PIN_ERR_IS_ERR(ebufp))
                return;
        PIN_ERR_CLEAR_ERR(ebufp);

        /*
         * Null out results until we're sure there's something to send back
         */
        *r_flistpp = NULL;

        /*
         * Sanity check -- make sure we've routed the opcode appropriately
         */
        if (opcode != PCM_OP_CUST_POL_SET_BRANDINFO) {
                pin_set_err(ebufp, PIN_ERRLOC_FM,
                        PIN_ERRCLASS_SYSTEM_DETERMINATE,
                        PIN_ERR_BAD_OPCODE, 0, 0, opcode);
                PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
                        "bad opcode in op_cust_pol_set_brandinfo", ebufp);
                return;
        }

	/*
	 * For completeness, dump the input flist if debugging is enabled.
	 */
        PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
                          "op_cust_pol_set_brandinfo input flist:",
                          i_flistp);

	/*
 	 * Call the main function -- this is where all the real work is done.
	 */
	fm_cust_pol_set_brandinfo(ctxp, opflags, i_flistp, r_flistpp, ebufp);

	/*
	 * For completeness, dump the results flist if debugging is enabled
	 * and we actually have a results flist.
	 */
	if(*r_flistpp != (pin_flist_t *)NULL) {
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_cust_pol_set_brandinfo output flist:",
			*r_flistpp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:59,代码来源:fm_cust_pol_set_brandinfo.c


示例19: op_cust_pol_valid_status

/*******************************************************************
 * Main routine for the PCM_OP_CUST_POL_VALID_STATUS operation.
 *******************************************************************/
void
op_cust_pol_valid_status(
        cm_nap_connection_t	*connp,
	u_int			opcode,
        u_int			flags,
        pin_flist_t		*i_flistp,
        pin_flist_t		**ret_flistpp,
        pin_errbuf_t		*ebufp)
{
	pcm_context_t		*ctxp = connp->dm_ctx;
	pin_flist_t		*r_flistp = NULL;


	/*
	 * Null out results until we have some.
	 */
	*ret_flistpp = NULL;
	PIN_ERR_CLEAR_ERR(ebufp);

	/*
	 * Insanity check.
	 */
	if (opcode != PCM_OP_CUST_POL_VALID_STATUS) {
		pin_set_err(ebufp, PIN_ERRLOC_FM,
			PIN_ERRCLASS_SYSTEM_DETERMINATE,
			PIN_ERR_BAD_OPCODE, 0, 0, opcode);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"bad opcode in op_cust_pol_valid_status", ebufp);
		return; 
	}

	/*
	 * Debug: what did we get?
	 */
	PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
		"op_cust_pol_valid_status input flist", i_flistp);

	/*
	 * Call main function to do it
	 */
	fm_cust_pol_valid_status(ctxp, i_flistp, &r_flistp, ebufp);

	/*
	 * Results.
	 */
	if (PIN_ERR_IS_ERR(ebufp)) {
		*ret_flistpp = (pin_flist_t *)NULL;
		PIN_FLIST_DESTROY(r_flistp, NULL);
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
			"op_cust_pol_valid_status error", ebufp);
	} else {
		*ret_flistpp = r_flistp;
		PIN_ERR_CLEAR_ERR(ebufp);
		PIN_ERR_LOG_FLIST(PIN_ERR_LEVEL_DEBUG,
			"op_cust_pol_valid_status return flist", r_flistp);
	}

	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:62,代码来源:fm_cust_pol_valid_status.c


示例20: fm_bill_pol_reverse_payment

/************************************************************************
 * fm_bill_pol_reverse_payment()
 ************************************************************************/
static  void
fm_bill_pol_reverse_payment(
	pcm_context_t      	*ctxp,
	int			flags,
	pin_flist_t             *in_flistp,
	pin_flist_t             **ret_flistpp,
	pin_errbuf_t       	*ebufp)	
{
	poid_t                  *a_pdp 		= NULL;
	pin_flist_t             *inh_flistp 	= NULL;
	
	if (PIN_ERR_IS_ERR(ebufp)){
		return;
	}
	PIN_ERR_CLEAR_ERR(ebufp);

	*ret_flistpp	=  PIN_FLIST_CREATE(ebufp);

	/***********************************************************
	 * Get and set PIN_FLD_POID in the output flist
	 ***********************************************************/
	a_pdp = PIN_FLIST_FLD_GET(in_flistp, PIN_FLD_POID, 0, ebufp);
	PIN_FLIST_FLD_SET(*ret_flistpp, PIN_FLD_POID, (void *)a_pdp, ebufp);

	/***********************************************************
	 * Get INHERITED_INFO from the input flist and
	 * Set in the ouput flist if present
	 ***********************************************************/
	inh_flistp = PIN_FLIST_SUBSTR_GET(in_flistp,
				PIN_FLD_INHERITED_INFO, 1, ebufp);
	if ( inh_flistp ) {
		PIN_FLIST_SUBSTR_SET(*ret_flistpp, inh_flistp, 
				PIN_FLD_INHERITED_INFO, ebufp);
	}

	fm_bill_pol_reverse_payment_writeoff_account(ctxp, flags, in_flistp,
						 ebufp);

	if (PIN_ERR_IS_ERR(ebufp)) {
		PIN_ERR_LOG_EBUF(PIN_ERR_LEVEL_ERROR,
				"fm_bill_pol_reverse_payment error", ebufp);
	} else {
		PIN_ERR_CLEAR_ERR(ebufp);
	}
	return;
}
开发者ID:cubastion-umesh,项目名称:cubnbrm,代码行数:49,代码来源:fm_bill_pol_reverse_payment.c



注:本文中的PIN_ERR_IS_ERR函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ PIN_ERR_LOG_EBUF函数代码示例发布时间:2022-05-30
下一篇:
C++ PIN_ERR_CLEAR_ERR函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap