C++ PH_LOG_HELPER_ALLOCATE_TEXT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PH_LOG_HELPER_ALLOCATE_TEXT函数的典型用法代码示例。如果您正苦于以下问题：C++ PH_LOG_HELPER_ALLOCATE_TEXT函数的具体用法？C++ PH_LOG_HELPER_ALLOCATE_TEXT怎么用？C++ PH_LOG_HELPER_ALLOCATE_TEXT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PH_LOG_HELPER_ALLOCATE_TEXT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: phpalFelica_ReqC

phStatus_t phpalFelica_ReqC(
                            void* pDataParams,
                            uint8_t* pSystemCode,
                            uint8_t bTimeSlot,
                            uint8_t* pRxBuffer
                            )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalFelica_ReqC");
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pSystemCode);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bTimeSlot);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pRxBuffer);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_INFO, pSystemCode_log, pSystemCode, 2);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_INFO, bTimeSlot_log, &bTimeSlot);   
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pSystemCode);
    PH_ASSERT_NULL (pRxBuffer);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_FELICA)
    {
		status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_FELICA);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_FELICA_SW
    case PHPAL_FELICA_SW_ID:
        status = phpalFelica_Sw_ReqC((phpalFelica_Sw_DataParams_t *)pDataParams, pSystemCode, bTimeSlot, pRxBuffer);
        break;
#endif /* NXPBUILD__PHPAL_FELICA_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_FELICA);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ((status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pRxBuffer_log, pRxBuffer, PHPAL_FELICA_IDM_LENGTH + PHPAL_FELICA_PMM_LENGTH);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:60，代码来源:phpalFelica.c

示例2: phalMful_UlcAuthenticate

phStatus_t phalMful_UlcAuthenticate(
                                    void * pDataParams,
                                    uint16_t wKeyNumber,
                                    uint16_t wKeyVersion
                                    )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalMful_UlcAuthenticate");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wKeyNumber);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wKeyVersion);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wKeyNumber_log, &wKeyNumber);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wKeyVersion_log, &wKeyVersion);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_MFUL)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFUL);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_MFUL_SW
    case PHAL_MFUL_SW_ID:
        status = phalMful_Sw_UlcAuthenticate((phalMful_Sw_DataParams_t *)pDataParams, wKeyNumber, wKeyVersion);
        break;
#endif /* NXPBUILD__PHAL_MFUL_SW */

#ifdef NXPBUILD__PHAL_MFUL_SAMAV2
    case PHAL_MFUL_SAMAV2_ID:
        status = phalMful_SamAV2_UlcAuthenticate((phalMful_SamAV2_DataParams_t *)pDataParams, wKeyNumber, wKeyVersion);
        break;
#endif /* NXPBUILD__PHAL_MFUL_SAMAV2 */

#ifdef NXPBUILD__PHAL_MFUL_SAMAV2_X
    case PHAL_MFUL_SAMAV2_X_ID:
        status = phalMful_SamAV2_X_UlcAuthenticate((phalMful_SamAV2_X_DataParams_t *)pDataParams, wKeyNumber, wKeyVersion);
        break;
#endif /* NXPBUILD__PHAL_MFUL_SAMAV2_X */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFUL);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:60，代码来源:phalMful.c

示例3: phalMful_CompatibilityWrite

phStatus_t phalMful_CompatibilityWrite(
                                       void * pDataParams,
                                       uint8_t bAddress,
                                       uint8_t * pData
                                       )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalMful_CompatibilityWrite");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bAddress);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pData);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bAddress_log, &bAddress);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pData_log, pData, PHAL_MFUL_WRITE_BLOCK_LENGTH);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pData);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_MFUL)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFUL);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_MFUL_SW
    case PHAL_MFUL_SW_ID:
        status = phalMful_Sw_CompatibilityWrite((phalMful_Sw_DataParams_t *)pDataParams, bAddress, pData);
        break;
#endif /* NXPBUILD__PHAL_MFUL_SW */

#ifdef NXPBUILD__PHAL_MFUL_SAMAV2
    case PHAL_MFUL_SAMAV2_ID:
        status = phalMful_SamAV2_CompatibilityWrite((phalMful_SamAV2_DataParams_t *)pDataParams, bAddress, pData);
        break;
#endif /* NXPBUILD__PHAL_MFUL_SAMAV2 */

#ifdef NXPBUILD__PHAL_MFUL_SAMAV2_X
    case PHAL_MFUL_SAMAV2_X_ID:
        status = phalMful_SamAV2_X_CompatibilityWrite((phalMful_SamAV2_X_DataParams_t *)pDataParams, bAddress, pData);
        break;
#endif /* NXPBUILD__PHAL_MFUL_SAMAV2_X */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFUL);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:60，代码来源:phalMful.c

示例4: phpalEpcUid_Destroy

phStatus_t phpalEpcUid_Destroy(
                               void * pDataParams,
                               uint8_t bTagType,
                               uint8_t* pData,
                               uint8_t bDataLength,
                               uint8_t* pDestroyCode
                               )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalEpcUid_Destroy");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bTagType);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pData);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDestroyCode);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bTagType_log, &bTagType);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pData_log, pData, bDataLength);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pDestroyCode_log, pDestroyCode, 3);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pData);
    PH_ASSERT_NULL (pDestroyCode);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_EPCUID)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_EPCUID);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_EPCUID_SW
    case PHPAL_EPCUID_SW_ID:
        status = phpalEpcUid_Sw_Destroy(
            (phpalEpcUid_Sw_DataParams_t *)pDataParams,
            bTagType,
            pData,
            bDataLength,
            pDestroyCode);
        break;
#endif /* NXPBUILD__PHPAL_EPCUID_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_EPCUID);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:60，代码来源:phpalEpcUid.c

示例5: phalMfc_Authenticate

phStatus_t phalMfc_Authenticate(
                                void * pDataParams,
                                uint8_t bBlockNo,
                                uint8_t bKeyType,
                                uint16_t wKeyNumber,
                                uint16_t wKeyVersion,
                                uint8_t * pUid,
                                uint8_t bUidLength
                                )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalMfc_Authenticate");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bBlockNo);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bKeyType);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wKeyNumber);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wKeyVersion);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pUid);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bBlockNo_log, &bBlockNo);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bKeyType_log, &bKeyType);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wKeyNumber_log, &wKeyNumber);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wKeyVersion_log, &wKeyVersion);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pUid_log, pUid, bUidLength);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pUid);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_MFC)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_MFC_SW
    case PHAL_MFC_SW_ID:
        status = phalMfc_Sw_Authenticate((phalMfc_Sw_DataParams_t *)pDataParams, bBlockNo, bKeyType, wKeyNumber, wKeyVersion, pUid, bUidLength);
        break;
#endif /* NXPBUILD__PHAL_MFC_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:liddad，项目名称:DoorEntrySystem，代码行数:59，代码来源:phalMfc.c

示例6: phnpSnep_ClientReqPut

/* SNEP Client PUT request API */
phStatus_t phnpSnep_ClientReqPut( void                   *pDataParams,
                                 ph_NfcHandle             ConnHandle,
                                 phNfc_sData_t           *pPutData,
                                 pphnpSnep_Fri_ReqCb_t    fCbPut,
                                 void                    *cbContext
                                 )

{
    phStatus_t status = PH_ERR_SUCCESS;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phnpSnep_ClientReqPut");
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(fCbPut);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(cbContext);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (fCbPut);
    PH_ASSERT_NULL (cbContext);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_NP_SNEP)
    {
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHNP_SNEP_FRI
    case PHNP_SNEP_FRI_ID:

    status =  phnpSnep_Fri_ClientReqPut( ((phnpSnep_Fri_DataParams_t *) pDataParams),
                                         ConnHandle,
                                         pPutData,
                                         fCbPut,
                                         cbContext
                                       );

        break;
#endif /* NXPBUILD__PHNP_SNEP_FRI */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status ;

}

开发者ID:ipskid，项目名称:clev663，代码行数:59，代码来源:phnpSnep.c

示例7: phalSli_EASAlarm

phStatus_t phalSli_EASAlarm(
                            void * pDataParams,
                            uint8_t bOption,
                            uint8_t * pEasIdValue,
                            uint8_t bEasIdMaskLength,
                            uint8_t * pEas
                            )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalSli_EASAlarm");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bOption);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pEasIdValue);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pEas);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bOption_log, &bOption);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pEasIdValue_log, pEasIdValue, bEasIdMaskLength);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pEasIdValue);
	PH_ASSERT_NULL (pEas);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_SLI)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_SLI);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_SLI_SW
    case PHAL_SLI_SW_ID:
        status = phalSli_Sw_EASAlarm((phalSli_Sw_DataParams_t *)pDataParams, bOption, pEasIdValue, bEasIdMaskLength, pEas);
        break;
#endif /* NXPBUILD__PHAL_SLI_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_SLI);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ( (status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pEas_log, pEas, 32);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:58，代码来源:phalSli.c

示例8: phalSli_GetMultipleBlockProtStatus

phStatus_t phalSli_GetMultipleBlockProtStatus(
    void * pDataParams,
    uint8_t bBlockNo,
    uint16_t wNumBlocks,
    uint8_t * pProtectionStates,
    uint8_t * pNumReceivedStates
    )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalSli_GetMultipleBlockProtStatus");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bBlockNo);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wNumBlocks);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pProtectionStates);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bBlockNo_log, &bBlockNo);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wNumBlocks_log, &wNumBlocks);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pProtectionStates);
	PH_ASSERT_NULL (pNumReceivedStates);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_SLI)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_SLI);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_SLI_SW
    case PHAL_SLI_SW_ID:
        status = phalSli_Sw_GetMultipleBlockProtStatus((phalSli_Sw_DataParams_t *)pDataParams, bBlockNo, wNumBlocks, pProtectionStates, pNumReceivedStates);
        break;
#endif /* NXPBUILD__PHAL_SLI_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_SLI);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ( (status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pProtectionStates_log, pProtectionStates, *pNumReceivedStates);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:58，代码来源:phalSli.c

示例9: phalMfc_ReadValue

phStatus_t phalMfc_ReadValue(
                             void * pDataParams,
                             uint8_t bBlockNo,
                             uint8_t * pValue,
                             uint8_t * pAddrData
                             )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalMfc_ReadValue");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bBlockNo);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pValue);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pAddrData);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bBlockNo_log, &bBlockNo);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pValue);
	PH_ASSERT_NULL (pAddrData);

    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_MFC)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_MFC_SW
    case PHAL_MFC_SW_ID:
        status = phalMfc_Sw_ReadValue((phalMfc_Sw_DataParams_t *)pDataParams, bBlockNo, pValue, pAddrData);
        break;
#endif /* NXPBUILD__PHAL_MFC_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_MFC);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ((status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pValue_log, pValue, 4);
        PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, pAddrData_log, pAddrData);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
    
    return status;
}

开发者ID:liddad，项目名称:DoorEntrySystem，代码行数:58，代码来源:phalMfc.c

示例10: phpalI14443p3b_SlotMarker

phStatus_t phpalI14443p3b_SlotMarker(
                                     void * pDataParams,
                                     uint8_t bSlotNumber,
                                     uint8_t * pAtqb,
                                     uint8_t * pAtqbLen
                                     )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalI14443p3b_SlotMarker");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(bSlotNumber);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pAtqb);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_DEBUG, bSlotNumber_log, &bSlotNumber);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pAtqb);
	PH_ASSERT_NULL (pAtqbLen);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_ISO14443P3B)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_ISO14443P3B);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_I14443P3B_SW
    case PHPAL_I14443P3B_SW_ID:
		status = phpalI14443p3b_Sw_SlotMarker((phpalI14443p3b_Sw_DataParams_t *)pDataParams, bSlotNumber, pAtqb, pAtqbLen);
        break;
#endif /* NXPBUILD__PHPAL_I14443P3B_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_ISO14443P3B);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ((status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pAtqb_log, pAtqb, *pAtqbLen);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:GeorgN，项目名称:RealTime-NFC-Reader，代码行数:57，代码来源:phpalI14443p3b.c

示例11: phCidManager_GetFreeCid

phStatus_t phCidManager_GetFreeCid(
                                   void * pDataParams,
                                   uint8_t * pCid
                                   )
{
   phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phCidManager_GetFreeCid");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pCid);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pCid);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_CIDMANAGER)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        
        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_CIDMANAGER);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PH_CIDMANAGER_SW
    case PH_CIDMANAGER_SW_ID:
        status = phCidManager_Sw_GetFreeCid((phCidManager_Sw_DataParams_t *)pDataParams, pCid);
        break;
#endif /* NXPBUILD__PH_CIDMANAGER_SW */

#ifdef NXPBUILD__PH_CIDMANAGER_RD710
    case PH_CIDMANAGER_RD710_ID:
        status = phCidManager_Rd710_GetFreeCid((phCidManager_Rd710_DataParams_t *)pDataParams, pCid);
        break;
#endif /* NXPBUILD__PH_CIDMANAGER_RD710 */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_CIDMANAGER);
        break;
    }
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ((status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_UINT8(PH_LOG_LOGTYPE_INFO, pCid_log, pCid);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:57，代码来源:phCidManager.c

示例12: phalFelica_GetConfig

phStatus_t phalFelica_GetConfig(
                                   void* pDataParams,
                                   uint16_t wConfig,
                                   uint16_t* pValue
                                   )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalFelica_GetConfig");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(wConfig);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pValue);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, wConfig_log, &wConfig);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pValue);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_FELICA)
    {
		status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_FELICA);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAL_FELICA_SW
    case PHAL_FELICA_SW_ID:
        status = phalFelica_Sw_GetConfig((phalFelica_Sw_DataParams_t *)pDataParams, wConfig, pValue );
        break;
#endif /* NXPBUILD__PHAL_FELICA_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_FELICA);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ((status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_DEBUG, pValue_log, pValue);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:57，代码来源:phalFelica.c

示例13: phalFelica_Write

phStatus_t phalFelica_Write(
                    void * pDataParams,
                    uint8_t  bNumServices,
                    uint8_t* pServiceList,
                    uint8_t  bNumBlocks,
                    uint8_t* pBlockList,
                    uint8_t  bBlockListLength,
                    uint8_t* pBlockData
                 )
{
	phStatus_t PH_MEMLOC_REM status;

	PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phalFelica_Write");
	PH_LOG_HELPER_ALLOCATE_PARAMNAME(pServiceList);
	PH_LOG_HELPER_ALLOCATE_PARAMNAME(pBlockData);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_INFO, pServiceList_log, pServiceList, bNumServices);
    PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_INFO, pBlockData_log, pBlockData, bBlockListLength);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);
	PH_ASSERT_NULL (pServiceList);
	PH_ASSERT_NULL (pBlockList);
	PH_ASSERT_NULL (pBlockData);

	/* Check data parameters */
	if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AL_FELICA)
	{
		status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_FELICA);

	    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
		PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
		PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

		return status;
	}

	/* perform operation on active layer */
	switch (PH_GET_COMPID(pDataParams))
	{
#ifdef NXPBUILD__PHAL_FELICA_SW
	case PHAL_FELICA_SW_ID:
        status = phalFelica_Sw_Write((phalFelica_Sw_DataParams_t *)pDataParams,  bNumServices, pServiceList, bNumBlocks, pBlockList, bBlockListLength, pBlockData);
		break;
#endif /* NXPBUILD__PHAL_FELICA_SW */

	default:
		status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AL_FELICA);
		break;
	}

	PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

	return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:57，代码来源:phalFelica.c

示例14: phnpSnep_Server_Init

/* SNEP Server Initialization API */
phStatus_t phnpSnep_Server_Init( void                          *pDataParams,
                                phnpSnep_Fri_Config_t          *pConfigInfo,
                                pphnpSnep_Fri_ConnectCB_t       pConnCb,
                                ph_NfcHandle                   *pServerHandle,
                                phnpSnep_Fri_ServerSession_t   *pServerSession,
                                void                           *pContext)
{
    phStatus_t status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phnpSnep_ClientReqGet");
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pConfigInfo);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pConnCb);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pConnCb);
    PH_ASSERT_NULL (pContext);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_NP_SNEP)
    {
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHNP_SNEP_FRI
    case PHNP_SNEP_FRI_ID:

    status = phnpSnep_Fri_Server_Init( (phnpSnep_Fri_DataParams_t *) pDataParams,
                                       pConfigInfo,
                                       pConnCb,
                                       pServerHandle,
                                       pServerSession,
                                       pContext
                                     );
        break;
#endif /* NXPBUILD__PHNP_SNEP_FRI */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_NP_SNEP);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:58，代码来源:phnpSnep.c

示例15: phpalEpcUid_GetSerialNo

phStatus_t phpalEpcUid_GetSerialNo(
                                   void * pDataParams,
                                   uint8_t* pRxBuffer,
                                   uint8_t* pRxLength
                                   )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalEpcUid_GetSerialNo");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(pRxBuffer);
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pRxBuffer);
    PH_ASSERT_NULL (pRxLength);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_EPCUID)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_EPCUID);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_EPCUID_SW
    case PHPAL_EPCUID_SW_ID:
        status = phpalEpcUid_Sw_GetSerialNo(
            (phpalEpcUid_Sw_DataParams_t *)pDataParams,
            pRxBuffer,
            pRxLength);
        break;
#endif /* NXPBUILD__PHPAL_EPCUID_SW */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_EPCUID);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
#ifdef NXPBUILD__PH_LOG
    if ((status & PH_ERR_MASK) == PH_ERR_SUCCESS)
    {
        PH_LOG_HELPER_ADDPARAM_BUFFER(PH_LOG_LOGTYPE_DEBUG, pRxBuffer_log, pRxBuffer, *pRxLength);
    }
#endif
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:halilercikan，项目名称:DWMS，代码行数:57，代码来源:phpalEpcUid.c

示例16: phbalReg_ClosePort

phStatus_t phbalReg_ClosePort(
                              void * pDataParams
                              )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phbalReg_ClosePort");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_BAL)
    {
		status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_BAL);

        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return status;
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHBAL_REG_STUB
    case PHBAL_REG_STUB_ID:
        status = phbalReg_Stub_ClosePort((phbalReg_Stub_DataParams_t*)pDataParams);
        break;
#endif /* NXPBUILD__PHBAL_REG_STUB */

#ifdef NXPBUILD__PHBAL_REG_LPC1768SPI
    case PHBAL_REG_LPC1768SPI_ID:
        status = phbalReg_Lpc1768Spi_ClosePort((phbalReg_Lpc1768Spi_DataParams_t *)pDataParams);
        break;
#endif /* NXPBUILD__PHBAL_REG_LPC1768SPI */

#ifdef NXPBUILD__PHBAL_REG_LPC1768I2C
    case PHBAL_REG_LPC1768I2C_ID:
        status = phbalReg_Lpc1768I2c_ClosePort((phbalReg_Lpc1768I2c_DataParams_t *)pDataParams);
        break;
#endif /* NXPBUILD__PHBAL_REG_LPC1768SPI */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_BAL);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

    return status;
}

开发者ID:ipskid，项目名称:clev663，代码行数:57，代码来源:phbalReg.c

示例17: phacDiscLoop_SetPtr

phStatus_t phacDiscLoop_SetPtr(
    void * pDataParams,
    void * pI14443p3a,
    void * pI14443p4a,
    void * pI14443p3b,
    void * pFeilca,
    void * pI18092mPI
    
    )
{
    phStatus_t PH_MEMLOC_REM status;
    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phacDiscLoop_SetPtr");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams); */
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
    PH_ASSERT_NULL (pDataParams);
    PH_ASSERT_NULL (pI14443p3a);
    PH_ASSERT_NULL (pI14443p4a);
    PH_ASSERT_NULL (pI14443p3b);
    PH_ASSERT_NULL (pFeilca);
    PH_ASSERT_NULL (pI18092mPI);
    
    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_AC_DISCLOOP)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
    }
    
    switch(PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHAC_DISCLOOP_SW
    case PHAC_DISCLOOP_SW_ID:
        status = phacDiscLoop_Sw_SetPtr(pDataParams,
            pI14443p3a,
            pI14443p4a,
            pI14443p3b,
            pFeilca,
            pI18092mPI
            );
        break;
#endif /* NXPBUILD__PHAC_DISCLOOP_SW */
    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_AC_DISCLOOP);
        break;
    }
    
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);
    return status;    
}

开发者ID:idodoyo，项目名称:nxprdlib，代码行数:57，代码来源:phacDiscLoop.c

示例18: phpalI14443p3a_HaltA

phStatus_t phpalI14443p3a_HaltA(
                                void * pDataParams
                                )
{
    phStatus_t PH_MEMLOC_REM status;

    PH_LOG_HELPER_ALLOCATE_TEXT(bFunctionName, "phpalI14443p3a_HaltA");
    /*PH_LOG_HELPER_ALLOCATE_PARAMNAME(pDataParams);*/
    PH_LOG_HELPER_ALLOCATE_PARAMNAME(status);
    PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
    PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_ENTER);
	PH_ASSERT_NULL (pDataParams);

    /* Check data parameters */
    if (PH_GET_COMPCODE(pDataParams) != PH_COMP_PAL_ISO14443P3A)
    {
        PH_LOG_HELPER_ADDSTRING(PH_LOG_LOGTYPE_INFO, bFunctionName);
        PH_LOG_HELPER_ADDPARAM_UINT16(PH_LOG_LOGTYPE_INFO, status_log, &status);
        PH_LOG_HELPER_EXECUTE(PH_LOG_OPTION_CATEGORY_LEAVE);

        return PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_ISO14443P3A);
    }

    /* perform operation on active layer */
    switch (PH_GET_COMPID(pDataParams))
    {
#ifdef NXPBUILD__PHPAL_I14443P3A_SW
    case PHPAL_I14443P3A_SW_ID:
        status = phpalI14443p3a_Sw_HaltA((phpalI14443p3a_Sw_DataParams_t *)pDataParams);
        break;
#endif /* NXPBUILD__PHPAL_I14443P3A_SW */

#ifdef NXPBUILD__PHPAL_I14443P3A_RD70X
    case PHPAL_I14443P3A_RD70X_ID:
        status = phpalI14443p3a_Rd70x_HaltA((phpalI14443p3a_Rd70x_DataParams_t *)pDataParams);
        break;
#endif /* NXPBUILD__PHPAL_I14443P3A_RD70X */

#ifdef NXPBUILD__PHPAL_I14443P3A_RD710
    case PHPAL_I14443P3A_RD710_ID:
        status = phpalI14443p3a_Rd710_HaltA((phpalI14443p3a_Rd710_DataParams_t *)pDataParams);
        break;
#endif /* NXPBUILD__PHPAL_I14443P3A_RD710 */

    default:
        status = PH_ADD_COMPCODE(PH_ERR_INVALID_DATA_PARAMS, PH_COMP_PAL_ISO14443P3A);
        break;
    }

    PH_LOG_HELPER_ADDSTRING(

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PH_LOG_HELPER_EXECUTE函数代码示例发布时间：2022-05-30

C++ PH_LOG_HELPER_ALLOCATE_PARAMNAME函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19267|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10012|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8339|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8707|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8653|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9682|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8641|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8009|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8676|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7545|2022-11-06

客服电话

电子邮件

C++ PH_LOG_HELPER_ALLOCATE_TEXT函数代码示例

示例1: phpalFelica_ReqC

示例2: phalMful_UlcAuthenticate

示例3: phalMful_CompatibilityWrite

示例4: phpalEpcUid_Destroy

示例5: phalMfc_Authenticate

示例6: phnpSnep_ClientReqPut

示例7: phalSli_EASAlarm

示例8: phalSli_GetMultipleBlockProtStatus

示例9: phalMfc_ReadValue

示例10: phpalI14443p3b_SlotMarker

示例11: phCidManager_GetFreeCid

示例12: phalFelica_GetConfig

示例13: phalFelica_Write

示例14: phnpSnep_Server_Init

示例15: phpalEpcUid_GetSerialNo

示例16: phbalReg_ClosePort

示例17: phacDiscLoop_SetPtr

示例18: phpalI14443p3a_HaltA

请发表评论

全部评论

上一篇：

下一篇：

MikeMcQuaid/strap:

headcr4sh/node-maven: Maven for Node.js

CVE-2022-26527

traex/RippleEffect: Implementation of Ri

CVE-2021-23451

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053