C++ PCI_VDEVICE函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中PCI_VDEVICE函数的典型用法代码示例。如果您正苦于以下问题：C++ PCI_VDEVICE函数的具体用法？C++ PCI_VDEVICE怎么用？C++ PCI_VDEVICE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了PCI_VDEVICE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sis_init_one

	SIS182_SATA1_OFS	= 0x20, /* offset from sata0->sata1 phy regs */
	SIS_PMR			= 0x90, /* port mapping register */
	SIS_PMR_COMBINED	= 0x30,

	/* random bits */
	SIS_FLAG_CFGSCR		= (1 << 30), /* host flag: SCRs via PCI cfg */

	GENCTL_IOMAPPED_SCR	= (1 << 26), /* if set, SCRs are in IO space */
};

static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static int sis_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);

static const struct pci_device_id sis_pci_tbl[] = {
	{ PCI_VDEVICE(SI, 0x0180), sis_180 },		/* SiS 964/180 */
	{ PCI_VDEVICE(SI, 0x0181), sis_180 },		/* SiS 964/180 */
	{ PCI_VDEVICE(SI, 0x0182), sis_180 },		/* SiS 965/965L */
	{ PCI_VDEVICE(SI, 0x0183), sis_180 },		/* SiS 965/965L */
	{ PCI_VDEVICE(SI, 0x1182), sis_180 },		/* SiS 966/680 */
	{ PCI_VDEVICE(SI, 0x1183), sis_180 },		/* SiS 966/966L/968/680 */

	{ }	/* terminate list */
};

static struct pci_driver sis_pci_driver = {
	.name			= DRV_NAME,
	.id_table		= sis_pci_tbl,
	.probe			= sis_init_one,
	.remove			= ata_pci_remove_one,
};

开发者ID:dsdbook，项目名称:dsd_orsoc，代码行数:31，代码来源:sata_sis.c

示例2: scc_remove

static void __devexit scc_remove(struct pci_dev *dev)
{
	struct scc_ports *ports = pci_get_drvdata(dev);
	struct ide_host *host = ports->host;

	ide_host_remove(host);

	iounmap((void*)ports->dma);
	iounmap((void*)ports->ctl);
	pci_release_selected_regions(dev, (1 << 2) - 1);
	memset(ports, 0, sizeof(*ports));
}

static const struct pci_device_id scc_pci_tbl[] = {
	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);

static struct pci_driver scc_pci_driver = {
	.name = "SCC IDE",
	.id_table = scc_pci_tbl,
	.probe = scc_init_one,
	.remove = __devexit_p(scc_remove),
};

static int scc_ide_init(void)
{
	return ide_pci_register_driver(&scc_pci_driver);
}

开发者ID:ClarkChen633，项目名称:rtl819x-toolchain，代码行数:30，代码来源:scc_pata.c

示例3: DEFINE_MUTEX

	int ch_num;
};


static int pch_i2c_speed = 100; /* I2C bus speed in Kbps */
static int pch_clk = 50000;	/* specifies I2C clock speed in KHz */
static wait_queue_head_t pch_event;
static DEFINE_MUTEX(pch_mutex);

/* Definition for ML7213 by OKI SEMICONDUCTOR */
#define PCI_VENDOR_ID_ROHM		0x10DB
#define PCI_DEVICE_ID_ML7213_I2C	0x802D
#define PCI_DEVICE_ID_ML7223_I2C	0x8010

static struct pci_device_id __devinitdata pch_pcidev_id[] = {
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
	{0,}
};

static irqreturn_t pch_i2c_handler(int irq, void *pData);

static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask)
{
	u32 val;
	val = ioread32(addr + offset);
	val |= bitmask;
	iowrite32(val, addr + offset);
}

开发者ID:TheDudeWithThreeHands，项目名称:ubuntu-precise-lowlatency，代码行数:30，代码来源:i2c-eg20t.c

示例4: snd_card_free

	dev++;
	return err;
out_free:
	snd_card_free(card);
	return err;
}

static void __devexit lola_remove(struct pci_dev *pci)
{
	snd_card_free(pci_get_drvdata(pci));
	pci_set_drvdata(pci, NULL);
}

/* PCI IDs */
static DEFINE_PCI_DEVICE_TABLE(lola_ids) = {
	{ PCI_VDEVICE(DIGIGRAM, 0x0001) },
	{ 0, }
};
MODULE_DEVICE_TABLE(pci, lola_ids);

/* pci_driver definition */
static struct pci_driver driver = {
	.name = KBUILD_MODNAME,
	.id_table = lola_ids,
	.probe = lola_probe,
	.remove = __devexit_p(lola_remove),
};

static int __init alsa_card_lola_init(void)
{
	return pci_register_driver(&driver);

开发者ID:303750856，项目名称:linux-3.1，代码行数:31，代码来源:lola.c

示例5: MODULE_PARM_DESC

MODULE_PARM_DESC(id, "ID string for the Yamaha DS-1 PCI soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Yamaha DS-1 soundcard.");
module_param_array(mpu_port, long, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 Port.");
module_param_array(fm_port, long, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM OPL-3 Port.");
#ifdef SUPPORT_JOYSTICK
module_param_array(joystick_port, long, NULL, 0444);
MODULE_PARM_DESC(joystick_port, "Joystick port address");
#endif
module_param_array(rear_switch, bool, NULL, 0444);
MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");

static const struct pci_device_id snd_ymfpci_ids[] = {
	{ PCI_VDEVICE(YAMAHA, 0x0004), 0, },   /* YMF724 */
	{ PCI_VDEVICE(YAMAHA, 0x000d), 0, },   /* YMF724F */
	{ PCI_VDEVICE(YAMAHA, 0x000a), 0, },   /* YMF740 */
	{ PCI_VDEVICE(YAMAHA, 0x000c), 0, },   /* YMF740C */
	{ PCI_VDEVICE(YAMAHA, 0x0010), 0, },   /* YMF744 */
	{ PCI_VDEVICE(YAMAHA, 0x0012), 0, },   /* YMF754 */
	{ 0, }
};

MODULE_DEVICE_TABLE(pci, snd_ymfpci_ids);

#ifdef SUPPORT_JOYSTICK
static int snd_ymfpci_create_gameport(struct snd_ymfpci *chip, int dev,
				      int legacy_ctrl, int legacy_ctrl2)
{
	struct gameport *gp;

开发者ID:020gzh，项目名称:linux，代码行数:31，代码来源:ymfpci.c

示例6: pci_get_drvdata

    struct ata_host *host = pci_get_drvdata(dev);
    int rc;

    rc = ata_pci_device_do_resume(dev);
    if (rc)
        return rc;

    hpt3x3_init_chipset(dev);

    ata_host_resume(host);
    return 0;
}
#endif

static const struct pci_device_id hpt3x3[] = {
    { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },

    { },
};

static struct pci_driver hpt3x3_pci_driver = {
    .name 		= DRV_NAME,
    .id_table	= hpt3x3,
    .probe 		= hpt3x3_init_one,
    .remove		= ata_pci_remove_one,
#ifdef CONFIG_PM_SLEEP
    .suspend	= ata_pci_device_suspend,
    .resume		= hpt3x3_reinit_one,
#endif
};

开发者ID:atmark-techno，项目名称:linux-3.14-at，代码行数:30，代码来源:pata_hpt3x3.c

示例7: BANK

#define DENALI_READ	0
#define DENALI_WRITE	0x100

/* types of device accesses. We can issue commands and get status */
#define COMMAND_CYCLE	0
#define ADDR_CYCLE	1
#define STATUS_CYCLE	2

/* this is a helper macro that allows us to
 * format the bank into the proper bits for the controller */
#define BANK(x) ((x) << 24)

/* List of platforms this NAND controller has be integrated into */
static const struct pci_device_id denali_pci_ids[] = {
	{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
	{ PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
	{ /* end: all zeroes */ }
};

/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali,
							uint32_t irq_mask);
static void denali_irq_enable(struct denali_nand_info *denali,
							uint32_t int_mask);
static uint32_t read_interrupt_status(struct denali_nand_info *denali);

/* Certain operations for the denali NAND controller use
 * an indexed mode to read/write data. The operation is
 * performed by writing the address value of the command

开发者ID:125radheyshyam，项目名称:linux，代码行数:30，代码来源:denali.c

示例8: amplc_dio200_common_attach

		if (ret < 0)
			return ret;
	}

	return amplc_dio200_common_attach(dev, pci_dev->irq, IRQF_SHARED);
}

static struct comedi_driver dio200_pci_comedi_driver = {
	.driver_name	= "amplc_dio200_pci",
	.module		= THIS_MODULE,
	.auto_attach	= dio200_pci_auto_attach,
	.detach		= comedi_pci_detach,
};

static const struct pci_device_id dio200_pci_table[] = {
	{ PCI_VDEVICE(AMPLICON, 0x000b), pci215_model },
	{ PCI_VDEVICE(AMPLICON, 0x000a), pci272_model },
	{ PCI_VDEVICE(AMPLICON, 0x0011), pcie236_model },
	{ PCI_VDEVICE(AMPLICON, 0x0012), pcie215_model },
	{ PCI_VDEVICE(AMPLICON, 0x0014), pcie296_model },
	{0}
};

MODULE_DEVICE_TABLE(pci, dio200_pci_table);

static int dio200_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	return comedi_pci_auto_config(dev, &dio200_pci_comedi_driver,
				      id->driver_data);
}

开发者ID:383530895，项目名称:linux，代码行数:30，代码来源:amplc_dio200_pci.c

示例9: printk

	if (use_msr)
		printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");

	cs5536_read(dev, CFG, &cfg);

	if ((cfg & IDE_CFG_CHANEN) == 0) {
		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
		return -ENODEV;
	}

	return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
}

static const struct pci_device_id cs5536[] = {
	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE), },
	{ },
};

static struct pci_driver cs5536_pci_driver = {
	.name		= DRV_NAME,
	.id_table	= cs5536,
	.probe		= cs5536_init_one,
	.remove		= ata_pci_remove_one,
#ifdef CONFIG_PM
	.suspend	= ata_pci_device_suspend,
	.resume		= ata_pci_device_resume,
#endif
};

static int __init cs5536_init(void)

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:30，代码来源:pata_cs5536.c

示例10: PCI_VDEVICE

#include <linux/ipv6.h>
#include <linux/tcp.h>
#include <net/ip6_checksum.h>

#include "cq_enet_desc.h"
#include "vnic_dev.h"
#include "vnic_intr.h"
#include "vnic_stats.h"
#include "enic_res.h"
#include "enic.h"

#define ENIC_NOTIFY_TIMER_PERIOD	(2 * HZ)

/* Supported devices */
static struct pci_device_id enic_id_table[] = {
	{ PCI_VDEVICE(CISCO, 0x0043) },
	{ 0, }	/* end of table */
};

MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR("Scott Feldman <[email protected]>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, enic_id_table);

struct enic_stat {
	char name[ETH_GSTRING_LEN];
	unsigned int offset;
};

#define ENIC_TX_STAT(stat)	\

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:31，代码来源:enic_main.c

示例11: dev_printk

        dev_printk(KERN_DEBUG, &pdev->dev,
                   "version " DRV_VERSION "\n");

    rc = pcim_enable_device(pdev);
    if (rc)
        return rc;

    /* Select 512 byte sectors */
    pci_write_config_byte(pdev, 0x55, 0xEE);
    /* Select PIO0 8bit clocking */
    pci_write_config_byte(pdev, 0x54, 0xB7);
    return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
}

static const struct pci_device_id ns87415_pci_tbl[] = {
    { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), },

    { }	/* terminate list */
};

static struct pci_driver ns87415_pci_driver = {
    .name			= DRV_NAME,
    .id_table		= ns87415_pci_tbl,
    .probe			= ns87415_init_one,
    .remove			= ata_pci_remove_one,
#ifdef CONFIG_PM
    .suspend		= ata_pci_device_suspend,
    .resume			= ata_pci_device_resume,
#endif
};

开发者ID:chunyenho，项目名称:RTS-hw2，代码行数:30，代码来源:pata_ns87415.c

示例12: atiixp_init_one

/**
 *	atiixp_init_one	-	called when a ATIIXP is found
 *	@dev: the atiixp device
 *	@id: the matching pci id
 *
 *	Called when the PCI registration layer (or the IDE initialization)
 *	finds a device matching our IDE device tables.
 */

static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]);
}

static const struct pci_device_id atiixp_pci_tbl[] = {
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);

static struct pci_driver driver = {
	.name		= "ATIIXP_IDE",
	.id_table	= atiixp_pci_tbl,
	.probe		= atiixp_init_one,
};

static int __init atiixp_ide_init(void)

开发者ID:maraz，项目名称:linux-2.6，代码行数:31，代码来源:atiixp.c

示例13: configure_pcie_bridge

static void configure_pcie_bridge(struct pci_dev *pci)
{
	enum { PEX811X, PI7C9X110 };
	static const struct pci_device_id bridge_ids[] = {
		{ PCI_VDEVICE(PLX, 0x8111), .driver_data = PEX811X },

开发者ID:303750856，项目名称:linux-3.1，代码行数:5，代码来源:oxygen_lib.c

示例14: MODULE_AUTHOR

MODULE_AUTHOR("Intel Corporation");

#define PCI_DEVICE_ID_INTEL_IOAT_IVB0	0x0e20
#define PCI_DEVICE_ID_INTEL_IOAT_IVB1	0x0e21
#define PCI_DEVICE_ID_INTEL_IOAT_IVB2	0x0e22
#define PCI_DEVICE_ID_INTEL_IOAT_IVB3	0x0e23
#define PCI_DEVICE_ID_INTEL_IOAT_IVB4	0x0e24
#define PCI_DEVICE_ID_INTEL_IOAT_IVB5	0x0e25
#define PCI_DEVICE_ID_INTEL_IOAT_IVB6	0x0e26
#define PCI_DEVICE_ID_INTEL_IOAT_IVB7	0x0e27
#define PCI_DEVICE_ID_INTEL_IOAT_IVB8	0x0e2e
#define PCI_DEVICE_ID_INTEL_IOAT_IVB9	0x0e2f

static struct pci_device_id ioat_pci_tbl[] = {
	/* I/OAT v1 platforms */
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB)  },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SCNB) },
	{ PCI_VDEVICE(UNISYS, PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR) },

	/* I/OAT v2 platforms */
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },

	/* I/OAT v3 platforms */
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG0) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG1) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG2) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG3) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG4) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG5) },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG6) },

开发者ID:AllenDou，项目名称:linux，代码行数:31，代码来源:pci.c

示例15: crystalhd_resume

		return -ENODEV;
	}

	sts = crystalhd_resume(&adp->cmds);
	if (sts != BC_STS_SUCCESS) {
		BCMLOG_ERR("BCM70012 Resume %d\n", sts);
		pci_disable_device(pdev);
		return -ENODEV;
	}

	return 0;
}
#endif

static DEFINE_PCI_DEVICE_TABLE(chd_dec_pci_id_table) = {
	{ PCI_VDEVICE(BROADCOM, 0x1612), 8 },
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, chd_dec_pci_id_table);

static struct pci_driver bc_chd_70012_driver = {
	.name     = "Broadcom 70012 Decoder",
	.probe    = chd_dec_pci_probe,
	.remove   = __devexit_p(chd_dec_pci_remove),
	.id_table = chd_dec_pci_id_table,
#ifdef CONFIG_PM
	.suspend  = chd_dec_pci_suspend,
	.resume   = chd_dec_pci_resume
#endif
};

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:30，代码来源:crystalhd_lnx.c

示例16: module_param_array

module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for the CS46xx soundcard.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for the CS46xx soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable CS46xx soundcard.");
module_param_array(external_amp, bool, NULL, 0444);
MODULE_PARM_DESC(external_amp, "Force to enable external amplifer.");
module_param_array(thinkpad, bool, NULL, 0444);
MODULE_PARM_DESC(thinkpad, "Force to enable Thinkpad's CLKRUN control.");
module_param_array(mmap_valid, bool, NULL, 0444);
MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");

static DEFINE_PCI_DEVICE_TABLE(snd_cs46xx_ids) = {
	{ PCI_VDEVICE(CIRRUS, 0x6001), 0, },   /* CS4280 */
	{ PCI_VDEVICE(CIRRUS, 0x6003), 0, },   /* CS4612 */
	{ PCI_VDEVICE(CIRRUS, 0x6004), 0, },   /* CS4615 */
	{ 0, }
};

MODULE_DEVICE_TABLE(pci, snd_cs46xx_ids);

static int snd_card_cs46xx_probe(struct pci_dev *pci,
				 const struct pci_device_id *pci_id)
{
	static int dev;
	struct snd_card *card;
	struct snd_cs46xx *chip;
	int err;

开发者ID:AeroGirl，项目名称:VAR-SOM-AM33-SDK7-Kernel，代码行数:29，代码来源:cs46xx.c

示例17: ide_pci_init_one

		if (dev->revision < 5) {
			d.udma_mask = 0x00;
			if (dev->revision < 3) {
				d.enablebits[0].reg = 0;
				d.port_ops = &cmd64x_port_ops;
				if (dev->revision == 1)
					d.dma_ops = &cmd646_rev1_dma_ops;
			}
		}
	}

	return ide_pci_init_one(dev, &d, NULL);
}

static const struct pci_device_id cmd64x_pci_tbl[] = {
	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 },
	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 },
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);

static struct pci_driver cmd64x_pci_driver = {
	.name		= "CMD64x_IDE",
	.id_table	= cmd64x_pci_tbl,
	.probe		= cmd64x_init_one,
	.remove		= ide_pci_remove,
	.suspend	= ide_pci_suspend,
	.resume		= ide_pci_resume,
};

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:31，代码来源:cmd64x.c

示例18: PCI_VDEVICE

	{"RSVD",			SPT_PMC_BIT_RSVD_1A},
	{"CSME_SMS2",			SPT_PMC_BIT_CSME_SMS2},
	{"CSME_SMS1",			SPT_PMC_BIT_CSME_SMS1},
	{"CSME_RTC",			SPT_PMC_BIT_CSME_RTC},
	{"CSME_PSF",			SPT_PMC_BIT_CSME_PSF},
	{},
};

static const struct pmc_reg_map spt_reg_map = {
	.pfear_sts = spt_pfear_map,
	.mphy_sts = spt_mphy_map,
	.pll_sts = spt_pll_map,
};

static const struct pci_device_id pmc_pci_ids[] = {
	{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID),
					(kernel_ulong_t)&spt_reg_map },
	{ 0, },
};

static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
{
	return readb(pmcdev->regbase + offset);
}

static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
{
	return readl(pmcdev->regbase + reg_offset);
}

static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int

开发者ID:AshishNamdev，项目名称:linux，代码行数:31，代码来源:intel_pmc_core.c

示例19: PCI_VDEVICE

			status = io->inputb(io, 1);
			io->io_cleanup(io);
			if (status)
				return regspacing;
			regspacing *= 4;
		}
	}
	return DEFAULT_REGSPACING;
}

static struct pci_device_id ipmi_pci_blacklist[] = {
	/*
	 * This is a "Virtual IPMI device", whatever that is.  It appears
	 * as a KCS device by the class, but it is not one.
	 */
	{ PCI_VDEVICE(REALTEK, 0x816c) },
	{ 0, }
};

static int ipmi_pci_probe(struct pci_dev *pdev,
				    const struct pci_device_id *ent)
{
	int rv;
	struct si_sm_io io;

	if (pci_match_id(ipmi_pci_blacklist, pdev))
		return -ENODEV;

	memset(&io, 0, sizeof(io));
	io.addr_source = SI_PCI;
	dev_info(&pdev->dev, "probing via PCI");

开发者ID:Anjali05，项目名称:linux，代码行数:31，代码来源:ipmi_si_pci.c

示例20: inw

	if (rc)
		return rc;

	/* Fixed location chipset magic */
	inw(0x1F1);
	inw(0x1F1);
	pci_clock = inb(0x1F5) & 1;		/* 0 = 33Mhz, 1 = 25Mhz */

	if (optiplus_with_udma(dev))
		ppi[0] = &info_82c700_udma;

	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
}

static const struct pci_device_id optidma[] = {
	{ PCI_VDEVICE(OPTI, 0xD568), },		/* Opti 82C700 */

	{ },
};

static struct pci_driver optidma_pci_driver = {
	.name 		= DRV_NAME,
	.id_table	= optidma,
	.probe 		= optidma_init_one,
	.remove		= ata_pci_remove_one,
#ifdef CONFIG_PM
	.suspend	= ata_pci_device_suspend,
	.resume		= ata_pci_device_resume,
#endif
};

开发者ID:mikeberkelaar，项目名称:grhardened，代码行数:30，代码来源:pata_optidma.c

注：本文中的PCI_VDEVICE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ PCI_VENDOR函数代码示例发布时间：2022-05-30

C++ PCI_SLOT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19266|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10012|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8339|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8706|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8653|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9681|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8640|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8009|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8676|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7545|2022-11-06

客服电话

电子邮件

C++ PCI_VDEVICE函数代码示例

示例1: sis_init_one

示例2: scc_remove

示例3: DEFINE_MUTEX

示例4: snd_card_free

示例5: MODULE_PARM_DESC

示例6: pci_get_drvdata

示例7: BANK

示例8: amplc_dio200_common_attach

示例9: printk

示例10: PCI_VDEVICE

示例11: dev_printk

示例12: atiixp_init_one

示例13: configure_pcie_bridge

示例14: MODULE_AUTHOR

示例15: crystalhd_resume

示例16: module_param_array

示例17: ide_pci_init_one

示例18: PCI_VDEVICE

示例19: PCI_VDEVICE

示例20: inw

请发表评论

全部评论

上一篇：

下一篇：

zakkg3/ClusterSecret: Kubernetes Cluster

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053