本文整理汇总了C++中OstTrace1函数的典型用法代码示例。如果您正苦于以下问题:C++ OstTrace1函数的具体用法?C++ OstTrace1怎么用?C++ OstTrace1使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了OstTrace1函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: OstTraceFunctionEntry0
/**
Concludes an USB MTP device class specific request request processing sequence.
*/
void CMTPUsbEpControl::SendControlRequestStatus()
{
OstTraceFunctionEntry0( CMTPUSBEPCONTROL_SENDCONTROLREQUESTSTATUS_ENTRY );
OstTrace1( TRACE_NORMAL, CMTPUSBEPCONTROL_SENDCONTROLREQUESTSTATUS,
"CMTPUsbEpControl state on entry = %d", iState );
__ASSERT_DEBUG(((iState == EControlRequestStatusSend) || (iState == EControlRequestSetupComplete)), Panic(EMTPUsbBadState));
TInt ret = Connection().Ldd().SendEp0StatusPacket();
OstTrace1( TRACE_NORMAL, DUP1_CMTPUSBEPCONTROL_SENDCONTROLREQUESTSTATUS,
"SendEp0StatusPacket result = %d.", ret );
SetState(EIdle);
OstTrace1( TRACE_NORMAL, DUP2_CMTPUSBEPCONTROL_SENDCONTROLREQUESTSTATUS,
"CMTPUsbEpControl state on exit = %d", iState );
OstTraceFunctionExit0( CMTPUSBEPCONTROL_SENDCONTROLREQUESTSTATUS_EXIT );
}
开发者ID:kuailexs,项目名称:symbiandump-mw3,代码行数:17,代码来源:cmtpusbepcontrol.cpp
示例2: OstTraceFunctionEntry0
void CCdcDataInterface::ReadOneOrMoreCompleted(TInt aError)
/**
* The completion function, called when a ReadOneOrMore request is completed
* by the LDD.
*
* @param aError The result of the read request.
*/
{
OstTraceFunctionEntry0( CCDCDATAINTERFACE_READONEORMORECOMPLETED_ENTRY );
OstTrace1( TRACE_NORMAL, CCDCDATAINTERFACE_READONEORMORECOMPLETED, "CCdcDataInterface::ReadOneOrMoreCompleted;aError=%d", aError );
#ifdef __HEADLESS_ACM_TEST_CODE__
OstTrace1( TRACE_NORMAL, CCDCDATAINTERFACE_READONEORMORECOMPLETED_DUP1,
"CCdcDataInterface::ReadOneOrMoreCompleted;__HEADLESS_ACM_TEST_CODE__- issuing Write for %d bytes", iHeadlessAcmBuffer.Length() );
// Write back the data just read.
// If the ReadOneOrMore completed with an error, we panic, as it's
// invalidating the test.
if (aError != KErrNone)
{
OstTrace1( TRACE_FATAL, CCDCDATAINTERFACE_READONEORMORECOMPLETED_DUP2,
"CCdcDataInterface::ReadOneOrMoreCompleted;aError=%d", aError );
__ASSERT_DEBUG( EFalse, User::Panic(KAcmPanicCat, EPanicInternalError) );
}
if (!iWriter)
{
OstTraceExt1( TRACE_FATAL, CCDCDATAINTERFACE_READONEORMORECOMPLETED_DUP3,
"CCdcDataInterface::ReadOneOrMoreCompleted;iWriter=%p", iWriter );
__ASSERT_DEBUG( EFalse, User::Panic(KAcmPanicCat, EPanicInternalError) );
}
iWriter->Write(iHeadlessAcmBuffer, iHeadlessAcmBuffer.Length(), EFalse);
#else
if (!iReadOneOrMoreObserver)
{
OstTraceExt1( TRACE_FATAL, CCDCDATAINTERFACE_READONEORMORECOMPLETED_DUP4,
"CCdcDataInterface::ReadOneOrMoreCompleted;iReadOneOrMoreObserver=%p", iReadOneOrMoreObserver );
__ASSERT_DEBUG( EFalse, User::Panic(KAcmPanicCat, EPanicInternalError) );
}
// See comment in WriteCompleted.
MReadOneOrMoreObserver* temp = iReadOneOrMoreObserver;
iReadOneOrMoreObserver = NULL;
OstTrace0( TRACE_NORMAL, CCDCDATAINTERFACE_READONEORMORECOMPLETED_DUP5,
"CCdcDataInterface::ReadOneOrMoreCompleted;\tcalling ReadOneOrMoreCompleted on observer" );
temp->ReadOneOrMoreCompleted(aError);
#endif // __HEADLESS_ACM_TEST_CODE__
OstTraceFunctionExit0( CCDCDATAINTERFACE_READONEORMORECOMPLETED_EXIT );
}
开发者ID:cdaffara,项目名称:symbiandump-os2,代码行数:50,代码来源:CdcDataInterface.cpp
示例3: OstTraceFunctionEntryExt
void CUT_PBASE_T_USBDI_0485::Ep0TransferCompleteL(TInt aCompletionCode)
{
OstTraceFunctionEntryExt( CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL_ENTRY, this );
OstTrace1(TRACE_NORMAL, CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL, "Ep0TransferCompleteL with aCompletionCode = %d",aCompletionCode);
switch(iCaseStep)
{
case EInProgress:
{
if(aCompletionCode != KErrCancel)
{
OstTrace1(TRACE_NORMAL, CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL_DUP01, "<Error %d> Nakking request was not cancelled by stack",aCompletionCode);
return TestFailed(aCompletionCode);
}
// No panic or leave so passed
OstTrace0(TRACE_NORMAL, CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL_DUP02, "No leave or panic occured so open interface again and send test passed");
// Open the interface
TInt err(iUsbInterface0.Open(iToken0));
if(err != KErrNone)
{
OstTrace1(TRACE_NORMAL, CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL_DUP03, "<Error %d> Unable to open interface 0", err);
return TestFailed(err);
}
OstTrace0(TRACE_NORMAL, CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL_DUP04, "Interface 0 re-opened");
iCaseStep = EPassed;
TTestCasePassed request;
iControlEp0->SendRequest(request,this);
}
break;
case EPassed:
TestPassed();
break;
case EFailed:
default:
TestFailed(KErrCompletion);
break;
}
OstTraceFunctionExit1( CUT_PBASE_T_USBDI_0485_EP0TRANSFERCOMPLETEL_EXIT, this );
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:48,代码来源:PBASE-T_USBDI-0485.cpp
示例4: OstTrace0
// ---------------------------------------------------------
// CDpMif::SendMessage
// Send ISI message, given receiver device, receiver object,
// resource, transaction id, message id and message.
// (other items were commented in a header).
// ---------------------------------------------------------
//
TInt CDpMif::SendMessage(
TUint8 aRecDevice,
TUint8 aRecObject,
TUint8 aResource,
TUint8 aTransactionId,
TUint8 aMessageId,
const TDesC8& aMessage )
{
OstTrace0( TRACE_NORMAL, DUP1_CDPMIF_SENDMESSAGE, "CDpMif::SendMessage" );
OstTrace1( TRACE_NORMAL, DUP15_CDPMIF_SENDMESSAGE, "CDpMif:: Port: %u", iDataPort.PortUnit() );
OstTraceExt1( TRACE_NORMAL, DUP14_CDPMIF_SENDMESSAGE, "CDpMif:: ==> receiver dev.: 0x%hhx", aRecDevice );
OstTraceExt1( TRACE_NORMAL, DUP13_CDPMIF_SENDMESSAGE, "CDpMif:: ==> receiver obj.: 0x%hhx", aRecObject );
OstTraceExt1( TRACE_NORMAL, DUP12_CDPMIF_SENDMESSAGE, "CDpMif:: ==> resource: 0x%hhx", aResource );
OstTraceExt1( TRACE_NORMAL, DUP11_CDPMIF_SENDMESSAGE, "CDpMif:: ==> tra id: 0x%hhx", aTransactionId );
OstTraceExt1( TRACE_NORMAL, DUP10_CDPMIF_SENDMESSAGE, "CDpMif:: ==> msg id: 0x%hhx", aMessageId );
LOGM1(" CDpMif::SendMessage - Port %d", iDataPort.PortUnit() );
LOGM1(" ==> receiver dev.: 0x%x", aRecDevice );
LOGM1(" ==> receiver obj.: 0x%x", aRecObject );
LOGM1(" ==> resource: 0x%x", aResource );
LOGM1(" ==> tra id: 0x%x", aTransactionId );
LOGM1(" ==> msg id: 0x%x", aMessageId );
// We shall use send buffer
iSendMessage.Zero();
TIsiSend msg( iSendMessage );
msg.Set8bit( ISI_HEADER_OFFSET_RECEIVERDEVICE, aRecDevice );
msg.Set8bit( ISI_HEADER_OFFSET_RESOURCEID, aResource );
msg.Set8bit( ISI_HEADER_OFFSET_RECEIVEROBJECT, aRecObject );
msg.Set8bit( ISI_HEADER_OFFSET_TRANSID, aTransactionId );
msg.Set8bit( ISI_HEADER_OFFSET_MESSAGEID, aMessageId );
// Copy message data (+2 => after msgid and traid)
msg.CopyData( ISI_HEADER_SIZE + 2, aMessage );
// Add paddings
while ( iSendMessage.Length() % 4 )
{
iSendMessage.Append( 0x00 );
}
OstTrace1( TRACE_NORMAL, DUP8_CDPMIF_SENDMESSAGE, "CDpMif:: ==> message length: %d", iSendMessage.Length() );
OstPrintIsiMessage( iSendMessage );
LOGM1(" ==> message length: %d", iSendMessage.Length() );
LOGMESSAGE( iSendMessage );
return iDataPort.ISAHandle().Send( msg.Complete() );
}
开发者ID:wannaphongcom,项目名称:symbian-incubation-projects.fcl-modemadaptation,代码行数:55,代码来源:dpmif.cpp
示例5: OstTraceFunctionEntry0
// -------------------------------------------------------------------------------------
// CUpnpTmClientProfileService::SetClientProfileActionL
// @param aAction Pointer to UPnP action object
// @return Returns upnp error code
// ---------------------------------------------------------------------------------
//
TUpnpErrorCode CUpnpTmClientProfileService::SetClientProfileActionL( CUpnpAction* aAction )
{
OstTraceFunctionEntry0( CUPNPTMCLIENTPROFILESERVICE_SETCLIENTPROFILEACTIONL_ENTRY );
TUint profileIdInt;
// Fetch the value for profile ID argument
TLex8 lex( aAction->ArgumentValue(KProfileId) );
lex.Val(profileIdInt);
OstTrace1( TRACE_ERROR, CUPNPTMCLIENTPROFILESERVICE_SETCLIENTPROFILEACTIONL, "CUpnpTmClientProfileService::SetClientProfileActionL;profileIdInt=%d", profileIdInt );
// Fetch the value for client profile argument
const TDesC8& clientProfile = aAction->ArgumentValue(KClientProfile);
RBuf8 resultProfileBuf;
TTerminalModeErrorCode ret = iTmServerImpl.SetClientProfile( profileIdInt,clientProfile,resultProfileBuf );
if ( ret != ETerminalModeSuccess )
{
resultProfileBuf.Close();
OstTrace0( TRACE_ERROR, DUP1_CUPNPTMCLIENTPROFILESERVICE_SETCLIENTPROFILEACTIONL, "CUpnpTmClientProfileService::SetClientProfileActionL" );
return TUpnpErrorCode( ret );
}
CleanupClosePushL(resultProfileBuf);
aAction->SetArgumentL( KResultProfile , resultProfileBuf );
CleanupStack::PopAndDestroy(&resultProfileBuf);
OstTraceFunctionExit0( CUPNPTMCLIENTPROFILESERVICE_SETCLIENTPROFILEACTIONL_EXIT );
return EHttpOk;
}
开发者ID:kuailexs,项目名称:symbiandump-mw4,代码行数:32,代码来源:upnptmclientprofileservice.cpp
示例6: OstTraceFunctionEntry0
/**
Check if we can copy the file to the new location
*/
TMTPResponseCode CMTPImageDpCopyObject::CanCopyObjectL(const TDesC& aOldName, const TDesC& aNewName) const
{
OstTraceFunctionEntry0( CMTPIMAGEDPCOPYOBJECT_CANCOPYOBJECTL_ENTRY );
TMTPResponseCode result = EMTPRespCodeOK;
TEntry fileEntry;
LEAVEIFERROR(iFramework.Fs().Entry(aOldName, fileEntry),
OstTraceExt2( TRACE_ERROR, DUP1_CMTPIMAGEDPCOPYOBJECT_CANCOPYOBJECTL,
"Gets the entry details for %S failed! error code %d", aOldName, munged_err ));
TDriveNumber drive(static_cast<TDriveNumber>(iFramework.StorageMgr().DriveNumber(iStorageId)));
LEAVEIFERROR(drive,
OstTraceExt2( TRACE_ERROR, DUP2_CMTPIMAGEDPCOPYOBJECT_CANCOPYOBJECTL,
"Gets drive for storage %d failed! error code %d", iStorageId, munged_err ));
TVolumeInfo volumeInfo;
LEAVEIFERROR(iFramework.Fs().Volume(volumeInfo, drive),
OstTraceExt2( TRACE_ERROR, DUP3_CMTPIMAGEDPCOPYOBJECT_CANCOPYOBJECTL,
"Gets volume information for driver %d failed! error code %d", drive, munged_err ));
if(volumeInfo.iFree < fileEntry.FileSize())
{
result = EMTPRespCodeStoreFull;
}
else if (BaflUtils::FileExists(iFramework.Fs(), aNewName))
{
result = EMTPRespCodeInvalidParentObject;
}
OstTrace1( TRACE_NORMAL, CMTPIMAGEDPCOPYOBJECT_CANCOPYOBJECTL,
"CanCopyObjectL - Exit with response code 0x%04X", result );
OstTraceFunctionExit0( CMTPIMAGEDPCOPYOBJECT_CANCOPYOBJECTL_EXIT );
return result;
}
开发者ID:kuailexs,项目名称:symbiandump-mw3,代码行数:34,代码来源:cmtpimagedpcopyobject.cpp
示例7: OstTraceFunctionEntry1
void CUT_PBASE_T_USBDI_1231::ExecuteHostTestCaseL()
{
OstTraceFunctionEntry1( CUT_PBASE_T_USBDI_1231_EXECUTEHOSTTESTCASEL_ENTRY, this );
OstTrace1(TRACE_NORMAL, CUT_PBASE_T_USBDI_1231_DCUT_PBASE_T_USBDI_1231_DUP01, "====> ExecuteHostTestCaseL entry priority = %d",
RThread().Priority());
// Bump thread priority for this test only
RThread().SetPriority(EPriorityAbsoluteHigh);
OstTraceExt2(TRACE_NORMAL, CUT_PBASE_T_USBDI_1231_DCUT_PBASE_T_USBDI_1231_DUP02, "Thread priority raised %d->%d", iPriority, RThread().Priority());
iCaseStep = EInProcess;
iActorFDF = CActorFDF::NewL(*this);
iControlEp0 = new (ELeave) CEp0Transfer(iUsbInterface0);
iInterface0Watcher = new (ELeave) CInterfaceWatcher(iUsbInterface0,TCallBack(CUT_PBASE_T_USBDI_1231::Interface0ResumedL,this));
iInterface1Watcher = new (ELeave) CInterfaceWatcher(iUsbInterface1,TCallBack(CUT_PBASE_T_USBDI_1231::Interface1ResumedL,this));
// Monitor for device connections
iActorFDF->Monitor();
// Start the connection timeout
TimeoutIn(30);
OstTraceFunctionExit1( CUT_PBASE_T_USBDI_1231_EXECUTEHOSTTESTCASEL_EXIT, this );
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:25,代码来源:PBASE-T_USBDI-1231.cpp
示例8: OstTraceFunctionEntry0
void CDeviceProxy::ReadStringDescriptorsL()
{
OstTraceFunctionEntry0( CDEVICEPROXY_READSTRINGDESCRIPTORSL_ENTRY );
// wait 10 ms before reading any string descriptors
// to avoid IOP issues with some USB devices (e.g. PNY Attache)
User::After(10000);
// First read string descriptor 0 (supported languages).
// For each supported language, read the manufacturer, product and serial
// number string descriptors (as supported). (These are not cached in
// USBD.)
// To look up these string descriptors we need to get the device
// descriptor. The device descriptor *is* cached in USBD, so we don't
// remember our own copy, even though it is queried later by the CFdf.
// '0' is the index of the string descriptor which holds the supported
// language IDs.
TBuf8<256> stringBuf;
TUsbStringDescriptor* stringDesc = NULL;
if(!(iHandle.Handle()))
{
OstTrace0( TRACE_FATAL, CDEVICEPROXY_READSTRINGDESCRIPTORSL_DUP1, "Empty handler" );
__ASSERT_DEBUG(EFalse,User::Panic(KPanicCategory, __LINE__));
}
TInt err=iHandle.GetStringDescriptor(stringDesc, stringBuf, 0);
LEAVEIFERRORL(err, OstTrace1( TRACE_ERROR, CDEVICEPROXY_READSTRINGDESCRIPTORSL_DUP6,
"iHandle.GetStringDescriptor error %d", err ););
开发者ID:cdaffara,项目名称:symbiandump-os2,代码行数:30,代码来源:deviceproxy.cpp
示例9: OstTraceFunctionEntryExt
void CUT_PBASE_T_USBDI_0479::Ep0TransferCompleteL(TInt aCompletionCode)
{
OstTraceFunctionEntryExt( CUT_PBASE_T_USBDI_0479_EP0TRANSFERCOMPLETEL_ENTRY, this );
OstTrace1(TRACE_NORMAL, CUT_PBASE_T_USBDI_0479_EP0TRANSFERCOMPLETEL, "Ep0TransferCompleteL with aCompletionCode = %d",aCompletionCode);
if(aCompletionCode != KErrNone)
{
TBuf<256> msg;
msg.Format(_L("<Error %d> Transfer to control endpoint 0 was not successful"),aCompletionCode);
OstTrace0(TRACE_NORMAL, CUT_PBASE_T_USBDI_0479_EP0TRANSFERCOMPLETEL_DUP01, msg);
}
if(iCaseStep == EPassed)
{
if(aCompletionCode == KErrNone)
{
return TestPassed();
}
// else error
iCaseStep = EFailed;
}
if(iCaseStep == EFailed)
{
return TestFailed(KErrCompletion);
}
OstTraceFunctionExit1( CUT_PBASE_T_USBDI_0479_EP0TRANSFERCOMPLETEL_EXIT, this );
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:29,代码来源:PBASE-T_USBDI-0479.cpp
示例10: OstTraceFunctionEntry1
//
//Start the control channel of NCM
//
TInt CNcmCommunicationInterface::Start()
{
OstTraceFunctionEntry1( CNCMCOMMUNICATIONINTERFACE_START_ENTRY, this );
if (iStarted)
{
OstTrace0( TRACE_WARNING, CNCMCOMMUNICATIONINTERFACE_START, "CNcmCommunicationInterface, already started!" );
OstTraceFunctionExit1( CNCMCOMMUNICATIONINTERFACE_START_EXIT, this );
return KErrInUse;
}
TInt ret = GetInterfaceNumber();
if (ret != KErrNone)
{
OstTrace1( TRACE_FATAL, CNCMCOMMUNICATIONINTERFACE_START1, "GetInterfaceNumber failed ret=%d", ret);
OstTraceFunctionExit1( CNCMCOMMUNICATIONINTERFACE_START_EXIT_DUP1, this );
return ret;
}
iStarted = ETrue;
iRWState = EStateInitial;
iSenderAndReceiver->Start();
//force a call to RunL
SetActive();
TRequestStatus* status=&iStatus;
User::RequestComplete(status, KErrNone);
OstTraceFunctionExit1( CNCMCOMMUNICATIONINTERFACE_START_EXIT_DUP2, this );
return KErrNone;
}
开发者ID:kuailexs,项目名称:symbiandump-os2,代码行数:33,代码来源:ncmcommunicationinterface.cpp
示例11: OstTrace0
void COtgRoot::otgDeactivateFdfActor()
{
if(!iFdfActorActive)
{
OstTrace0(TRACE_NORMAL, COTGROOT_OTGDEACTIVATEFDFACTOR, "FdfActor is not running!");
return;
}
// If iFdfActorActive is set, the FDF Actor should be waiting to
// rendezvous with us before it shuts down...
// First of all, logon to wait for it to close down properly
TRequestStatus waitForCloseStat;
iFdfActorProcess.Logon(waitForCloseStat);
// Now, trigger the FDF Actor to close down
RProcess::Rendezvous(KErrNone);
// ...and wait for it to go away.
User::WaitForRequest(waitForCloseStat);
test.Printf(_L("T_OTGDI confirms FDF Actor has gone away %d\n"), waitForCloseStat.Int());
OstTrace1(TRACE_NORMAL, COTGROOT_OTGDEACTIVATEFDFACTOR_DUP01, "T_OTGDI confirms FDF Actor has gone away %d\n", waitForCloseStat.Int());
// Now close our handle, and record that the process is no more...
iFdfActorProcess.Close();
iFdfActorActive = EFalse;
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:27,代码来源:otgroot.cpp
示例12: __PRINT1
TInt TFsFormatNext::DoRequestL(CFsRequest* aRequest)
//
// Format the next part of the media.
//
{
__PRINT1(_L("TFsFormatNext::DoRequestL() drv:%d"), aRequest->DriveNumber());
CFormatCB* format=(CFormatCB*)aRequest->ScratchValue();
TInt r=format->CheckMount();
if (r!=KErrNone && r!=KErrInUse)
{
__PRINT1(_L("TFsFormatNext::DoRequestL() err:%d"), r);
return r;
}
TPtr8 pStep((TUint8*)&format->CurrentStep(),sizeof(TInt));
aRequest->ReadL(KMsgPtr0,pStep);
OstTrace1(TRACE_FILESYSTEM, FSYS_ECFORMATCBDOFORMATSTEPL, "this %x", format);
TRAP(r,format->DoFormatStepL());
OstTraceExt2(TRACE_FILESYSTEM, FSYS_ECFORMATCBDOFORMATSTEPLRET, "r %d iCurrentStep %d", r, (TUint) format->CurrentStep());
if (r==KErrNone)
aRequest->WriteL(KMsgPtr0,pStep);
if (r==KErrNone && format->CurrentStep()==0)
{
FsNotify::DiskChange(aRequest->DriveNumber());
}
return(r);
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:32,代码来源:sf_fmt.cpp
示例13: OstTraceFunctionEntry1
//
//RunL, looply receive data from share chunk LDD until receive all required data
//
void CNcmCommInterfaceSenderAndReceiver::RunL()
{
OstTraceFunctionEntry1( CNCMCOMMINTERFACESENDERANDRECEIVER_RUNL_ENTRY, this );
if(iStatus.Int() != KErrNone)
{
if (KErrCancel == iStatus.Int() )
{
OstTrace0( TRACE_NORMAL, CNCMCOMMINTERFACESENDERANDRECEIVER_RUNL,"CNcmCommInterfaceSenderAndReceiver, control channel is cancelled" );
}
else
{
OstTrace1( TRACE_NORMAL, CNCMCOMMINTERFACESENDERANDRECEIVER_RUNL1, "CNcmCommInterfaceSenderAndReceiver::RunL error %d", iStatus.Int());
}
User::RequestComplete(iCompleteStatus, iStatus.Int());
}
else
{
if (iState == EReceiving)
{
ReadData();
}
else if (iState == ESending)
{
User::RequestComplete(iCompleteStatus, KErrNone);
iState = EIdle;
OstTrace0( TRACE_NORMAL, CNCMCOMMINTERFACESENDERANDRECEIVER_RUNL2,"Complete write request" );
}
}
OstTraceFunctionExit1( CNCMCOMMINTERFACESENDERANDRECEIVER_RUNL_EXIT, this );
}
开发者ID:cdaffara,项目名称:symbiandump-os2,代码行数:33,代码来源:ncmcomminterfacesenderandreceiver.cpp
示例14: TN_DEBUG2
// ---------------------------------------------------------------------------
// CThumbnailMDSQueryTask::DoCancel()
// ---------------------------------------------------------------------------
//
void CThumbnailMDSQueryTask::DoCancel()
{
TN_DEBUG2( "CThumbnailMDSQueryTask(0x%08x)::DoCancel()", this );
OstTrace1( TRACE_NORMAL, CTHUMBNAILMDSQUERYTASK_DOCANCEL, "CThumbnailMDSQueryTask::DoCancel;this=%o", this );
iQuery->Cancel();
}
开发者ID:kuailexs,项目名称:symbiandump-mw1,代码行数:11,代码来源:thumbnailmdsquerytask.cpp
示例15: OstTraceFunctionEntry0
TBool COtgRoot::otgIdPinPresent()
{
if(gVerboseOutput)
{
OstTraceFunctionEntry0(COTGROOT_OTGIDPINPRESENT);
}
TRequestStatus aStatus;
RUsbOtgDriver::TOtgIdPin aPin;
oUsbOtgDriver.QueueOtgIdPinNotification(aPin, aStatus); // the kernel driver populates aPin...
LOG_VERBOSE2(_L("(sync) ID_PIN=%d\n"), iOTGIdPin);
if(gVerboseOutput)
{
OstTrace1(TRACE_VERBOSE, COTGROOT_OTGIDPINPRESENT_DUP01, "(sync) ID_PIN=%d\n", iOTGIdPin);
}
oUsbOtgDriver.CancelOtgIdPinNotification();
// swallow the event
User::WaitForRequest(aStatus);
if (RUsbOtgDriver::EIdPinAPlug == aPin) // at this stage, the aPin value is known
{
return(ETrue);
}
return(EFalse);
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:25,代码来源:otgroot.cpp
示例16: OstTraceExt2
// -----------------------------------------------------------------------------
// CSACommonIscServiceChannelListener::NewL
// Two-phased constructor.
// -----------------------------------------------------------------------------
//
CSACommonIscServiceChannelListener* CSACommonIscServiceChannelListener::NewL(
MSAIscService& aAdaptation,
RIscApi& aIscApi)
{
OstTraceExt2( TRACE_NORMAL, SA_COMMON_ISC_SERVICE_CHANNEL_LISTENER_AUTOMATED_5,
"ISCSERVICE - CSACommonIscServiceChannelListener::NewL(0x%x,0x%x)",
(TUint)&aAdaptation, (TUint)&aIscApi );
INTERNAL_TRACE( ( _L( "ISCSERVICE - CSACommonIscServiceChannelListener::NewL(0x%x,0x%x)" ),
&aAdaptation, &aIscApi ) );
CSACommonIscServiceChannelListener* self = new( ELeave ) CSACommonIscServiceChannelListener(
aAdaptation,
aIscApi );
CleanupStack::PushL( self );
self->ConstructL();
CleanupStack::Pop( self );
OstTrace1( TRACE_NORMAL, SA_COMMON_ISC_SERVICE_CHANNEL_LISTENER_AUTOMATED_6,
"ISCSERVICE - CSACommonIscServiceChannelListener::NewL - return 0x%x", self );
INTERNAL_TRACE( ( _L( "ISCSERVICE - CSACommonIscServiceChannelListener::NewL - return 0x%x" ),
self ) );
return self;
}
开发者ID:wannaphongcom,项目名称:symbian-incubation-projects.fcl-modemadaptation,代码行数:30,代码来源:sa_common_isc_service_channel_listener.cpp
示例17: OstTraceFunctionEntry1
void CSoftwareConnectTimer::RunL()
{
OstTraceFunctionEntry1( CSOFTWARECONNECTTIMER_RUNL_ENTRY, this );
TInt completionCode(iStatus.Int());
if(completionCode != KErrNone)
{
OstTrace1(TRACE_NORMAL, CSOFTWARECONNECTTIMER_RUNL, "<Error %d> software connect/disconnect timer error",completionCode);
iTestDevice.ReportError(completionCode);
}
else
{
switch(iConnectType)
{
case EConnect:
iTestDevice.SoftwareConnect();
break;
case EDisconnect:
iTestDevice.SoftwareDisconnect();
break;
case EUnknown:
OstTrace0(TRACE_NORMAL, CSOFTWARECONNECTTIMER_RUNL_DUP01, "<Error> Unknown state for software connect timer");
break;
default:
break;
}
}
OstTraceFunctionExit1( CSOFTWARECONNECTTIMER_RUNL_EXIT, this );
}
开发者ID:kuailexs,项目名称:symbiandump-os1,代码行数:32,代码来源:SoftwareConnectTimer.cpp
示例18: OstTraceFunctionEntry0
// --------------------------------------------------------------------------
//
// --------------------------------------------------------------------------
//
void CPtpTimer::RunL()
{
OstTraceFunctionEntry0( CPTPTIMER_RUNL_ENTRY );
if (iStatus.Int() == KErrNone)
{
OstTrace0( TRACE_NORMAL, CPTPTIMER_RUNL, "--- timer expired, because of:" );
if (iSession.ServerP()->Printer()->Status() == CMTPPictBridgePrinter::ENotConnected) // must be DPS discovery, since no other service is supported
{
OstTrace0( TRACE_NORMAL, DUP1_CPTPTIMER_RUNL, "--- Dps printer not available" );
iSession.ServerP()->Printer()->NoDpsDiscovery();
iSession.IsDpsPrinterCompleted(EPrinterNotAvailable);
}
else if (iSession.ServerP()->Printer()->SendObjectPending())
{
OstTrace0( TRACE_NORMAL, DUP2_CPTPTIMER_RUNL, "---SendObject timeout" );
iSession.ServerP()->Printer()->DpsFileSent(KErrTimedOut);
}
else
{
OstTrace0( TRACE_NORMAL, DUP3_CPTPTIMER_RUNL, "---something else, do not care" );
}
}
else if (iStatus.Int() == KErrCancel)
{
OstTrace0( TRACE_NORMAL, DUP4_CPTPTIMER_RUNL, "--- RunL Cancelled." );
}
else
{
OstTrace1( TRACE_WARNING, DUP5_CPTPTIMER_RUNL, "!!!Error: Err %d returned.", iStatus.Int() );
}
OstTraceFunctionExit0( CPTPTIMER_RUNL_EXIT );
}
开发者ID:kuailexs,项目名称:symbiandump-mw3,代码行数:37,代码来源:cptptimer.cpp
示例19: OstTraceFunctionEntry0
void CMTPDeviceDataProvider::SessionOpenedL(const TMTPNotificationParamsSessionChange& /*aSession*/)
#endif
{
OstTraceFunctionEntry0( CMTPDEVICEDATAPROVIDER_SESSIONOPENEDL_ENTRY );
OstTrace1(TRACE_NORMAL, CMTPDEVICEDATAPROVIDER_SESSIONOPENEDL, "SessionID = %d", aSession.iMTPId);
OstTraceFunctionExit0( CMTPDEVICEDATAPROVIDER_SESSIONOPENEDL_EXIT);
}
开发者ID:kuailexs,项目名称:symbiandump-mw3,代码行数:7,代码来源:cmtpdevicedp.cpp
示例20: OstTrace0
// ---------------------------------------------------------
// CDpDataBuffer::SetLength
// This method sets length of buffer. This is called from
// CDpDataPort::SetReceiveBufferLength() method.
// ---------------------------------------------------------
//
TInt CDpDataBuffer::SetLength(
const TInt aLen)
{
OstTrace0( TRACE_NORMAL, CDPDATABUFFER_SETLENGTH, "CDpDataBuffer::SetLength" );
LOGM(" CDpDataBuffer::SetLength");
//Initialization
TInt max( 0 );
TInt ret( KErrNone );
if ( iHead + iWE.iSize > iEnd )
{
max = iHead + iWE.iSize;
}
else
{
max = iEnd;
}
OstTraceExt2( TRACE_NORMAL, DUP1_CDPDATABUFFER_SETLENGTH, "CDpDataBuffer:: iHead: %d, iWE.iSize: %d", iHead, iWE.iSize );
OstTraceExt2( TRACE_NORMAL, DUP2_CDPDATABUFFER_SETLENGTH, "CDpDataBuffer:: iEnd : %d, aLen : %d", iEnd, aLen );
LOG2(" iHead: %d, \t iWE.iSize: %d", iHead, iWE.iSize );
LOG2(" iEnd : %d, \t aLen : %d", iEnd, aLen );
if ( ( max >= ( aLen + iMaxReservationSize ) ) ||
( aLen < 2*iMaxReservationSize ) )
{
// buffer may be filled further than length
OstTrace0( TRACE_NORMAL, DUP3_CDPDATABUFFER_SETLENGTH, "CDpDataBuffer:: ERROR, Client tried to reserve too big or too small Receive Buffer Size" );
OstTraceExt2( TRACE_NORMAL, DUP4_CDPDATABUFFER_SETLENGTH, "CDpDataBuffer:: aLen: %d, iMaxReservationSize: %d", aLen, iMaxReservationSize );
OstTrace1( TRACE_NORMAL, DUP5_CDPDATABUFFER_SETLENGTH, "CDpDataBuffer:: max: %d", max );
LOG(" ERROR, Client tried to reserve too big or too small Receive Buffer Size");
LOG2(" aLen: %d, \t iMaxReservationSize: %d", aLen, iMaxReservationSize );
LOG1(" max: %d", max );
ret = KErrArgument;
}
else
{
iBuf->Des().SetLength( max );
HBufC8* tmp = NULL;
// ReAllocL returns address of the expanded or contracted HBufC descriptor.
// ReAllocL() leaves, if there is insufficient memory.
TRAP(ret, ( tmp = iBuf->ReAllocL( aLen+iMaxReservationSize ) ));
if ( KErrNone == ret )
{
iBuf=tmp;
iBuf->Des().SetLength( aLen + iMaxReservationSize );
iBufSize = aLen + iMaxReservationSize;
iTreshold = aLen;
}
}
return ret;
}
开发者ID:wannaphongcom,项目名称:symbian-incubation-projects.fcl-modemadaptation,代码行数:66,代码来源:dpdatabuffer.cpp
注:本文中的OstTrace1函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论