C++ Osal_MemSet函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Osal_MemSet函数的典型用法代码示例。如果您正苦于以下问题：C++ Osal_MemSet函数的具体用法？C++ Osal_MemSet怎么用？C++ Osal_MemSet使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Osal_MemSet函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: aci_l2cap_connection_parameter_update_response

tBleStatus aci_l2cap_connection_parameter_update_response(uint16_t conn_handle, uint16_t interval_min,
							 uint16_t interval_max, uint16_t slave_latency,
							 uint16_t timeout_multiplier, uint8_t id, uint8_t accept)
{
  struct hci_request rq;
  uint8_t status;
  l2cap_conn_param_update_resp_cp cp;

  cp.conn_handle = htobs(conn_handle);
  cp.interval_min = htobs(interval_min);
  cp.interval_max = htobs(interval_max);
  cp.slave_latency = htobs(slave_latency);
  cp.timeout_multiplier = htobs(timeout_multiplier);
  cp.id = id;
  cp.accept = accept;

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_L2CAP_CONN_PARAM_UPDATE_REQ;
  rq.cparam = &cp;
  rq.clen = L2CAP_CONN_PARAM_UPDATE_REQ_CP_SIZE;
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:jtheffernan，项目名称:stm32-nucleof4，代码行数:30，代码来源:bluenrg_l2cap_aci.c

示例2: aci_hal_set_tx_power_level

tBleStatus aci_hal_set_tx_power_level(uint8_t en_high_power, uint8_t pa_level)
{
  struct hci_request rq;
  hal_set_tx_power_level_cp cp;    
  uint8_t status;
    
  cp.en_high_power = en_high_power;
  cp.pa_level = pa_level;

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_HAL_SET_TX_POWER_LEVEL;
  rq.cparam = &cp;
  rq.clen = HAL_SET_TX_POWER_LEVEL_CP_SIZE;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  if (status) {
    return status;
  }

  return 0;
}

开发者ID:JUMA-IO，项目名称:STM32_Platform，代码行数:26，代码来源:bluenrg_hal_aci.c

示例3: aci_gatt_signed_write_without_resp

tBleStatus aci_gatt_signed_write_without_resp(uint16_t conn_handle, uint16_t attr_handle,
                                              uint8_t val_len, uint8_t* attr_val)
{
  struct hci_request rq;
  uint8_t status;
  gatt_signed_write_without_resp_cp cp;
  
  if(val_len > sizeof(cp.attr_val))
    return BLE_STATUS_INVALID_PARAMS;

  cp.conn_handle = htobs(conn_handle);
  cp.attr_handle = htobs(attr_handle);
  cp.val_len = val_len;
  Osal_MemCpy(cp.attr_val, attr_val, val_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_SIGNED_WRITE_WITHOUT_RESPONSE;
  rq.cparam = &cp;
  rq.clen = GATT_SIGNED_WRITE_WITHOUT_RESPONSE_CP_SIZE + val_len;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:28，代码来源:bluenrg_gatt_aci.c

示例4: aci_gatt_read_handle_value_offset_IDB05A1

tBleStatus aci_gatt_read_handle_value_offset_IDB05A1(uint16_t attr_handle, uint8_t offset, uint16_t data_len, uint16_t *data_len_out_p, uint8_t *data)
{
  struct hci_request rq;
  gatt_read_handle_val_offset_cp cp;
  gatt_read_handle_val_offset_rp rp;
  
  if(data_len > sizeof(rp.value))
    return BLE_STATUS_INVALID_PARAMS;

  cp.attr_handle = htobs(attr_handle);
  cp.offset = offset;

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_READ_HANDLE_VALUE_OFFSET;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.rparam = &rp;
  rq.rlen = sizeof(rp);

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;
  
  if(rp.status)
    return rp.status;

  *data_len_out_p = rp.value_len;

  Osal_MemCpy(data, rp.value, MIN(data_len, *data_len_out_p));

  return 0; 
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:32，代码来源:bluenrg_gatt_aci.c

示例5: aci_gap_start_connection_update

tBleStatus aci_gap_start_connection_update(uint16_t conn_handle, uint16_t conn_min_interval,	
                                           uint16_t conn_max_interval, uint16_t conn_latency,	
                                           uint16_t supervision_timeout, uint16_t min_conn_length, 
                                           uint16_t max_conn_length)
{
  struct hci_request rq;
  gap_start_connection_update_cp cp;
  uint8_t status;  

  cp.conn_handle = htobs(conn_handle);
  cp.conn_min_interval = htobs(conn_min_interval);
  cp.conn_max_interval = htobs(conn_max_interval);
  cp.conn_latency = htobs(conn_latency);
  cp.supervision_timeout = htobs(supervision_timeout);
  cp.min_conn_length = htobs(min_conn_length);
  cp.max_conn_length = htobs(max_conn_length);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_START_CONNECTION_UPDATE;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;
  
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:31，代码来源:bluenrg_gap_aci.c

示例6: aci_gatt_write_long_charac_val

tBleStatus aci_gatt_write_long_charac_val(uint16_t conn_handle, uint16_t attr_handle,
                                          uint16_t val_offset, uint8_t val_len, const uint8_t* attr_val)
{
  struct hci_request rq;
  uint8_t status;
  gatt_write_long_charac_val_cp cp;
  
  if(val_len > sizeof(cp.attr_val))
    return BLE_STATUS_INVALID_PARAMS;

  cp.conn_handle = htobs(conn_handle);
  cp.attr_handle = htobs(attr_handle);
  cp.val_offset = htobs(val_offset);
  cp.val_len = val_len;
  Osal_MemCpy(cp.attr_val, attr_val, val_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_WRITE_LONG_CHARAC_VAL;
  rq.cparam = &cp;
  rq.clen = GATT_WRITE_LONG_CHARAC_VAL_CP_SIZE + val_len;
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:30，代码来源:bluenrg_gatt_aci.c

示例7: aci_gap_update_adv_data

tBleStatus aci_gap_update_adv_data(uint8_t AdvLen, const uint8_t *AdvData)
{
  struct hci_request rq;
  uint8_t status;
  uint8_t buffer[32];
  uint8_t indx = 0;
    
  if (AdvLen > (sizeof(buffer)-1))
    return BLE_STATUS_INVALID_PARAMS;

  buffer[indx] = AdvLen;
  indx++;
    
  Osal_MemCpy(buffer + indx, AdvData, AdvLen);
  indx +=  AdvLen;
    
  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_UPDATE_ADV_DATA;
  rq.cparam = (void *)buffer;
  rq.clen = indx;
  rq.rparam = &status;
  rq.rlen = 1;
    
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;
    
  return status;
}

开发者ID:LeoNiz，项目名称:BLE-projet，代码行数:29，代码来源:bluenrg_gap_aci.c

示例8: aci_gap_start_general_conn_establish_proc

tBleStatus aci_gap_start_general_conn_establish_proc(uint8_t scan_type, uint16_t scan_interval, uint16_t scan_window,
						 uint8_t own_address_type, uint8_t filter_duplicates, uint8_t use_reconn_addr, const tBDAddr reconn_addr)
{
  struct hci_request rq;
  gap_start_general_conn_establish_proc_cp cp;
  uint8_t status;  

  cp.scan_type = scan_type;
  cp.scan_interval = htobs(scan_interval);
  cp.scan_window = htobs(scan_window);
  cp.own_address_type = own_address_type;
  cp.filter_duplicates = filter_duplicates;
  cp.use_reconn_addr = use_reconn_addr;
  Osal_MemCpy(cp.reconn_addr, reconn_addr, 6);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_START_GENERAL_CONN_ESTABLISH_PROC;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;
  
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:LeoNiz，项目名称:BLE-projet，代码行数:29，代码来源:bluenrg_gap_aci.c

示例9: aci_gatt_disc_all_charac_of_serv

tBleStatus aci_gatt_disc_all_charac_of_serv(uint16_t conn_handle, uint16_t start_attr_handle, 
					    uint16_t end_attr_handle)
{
  struct hci_request rq;
  uint8_t status;
  gatt_disc_all_charac_of_serv_cp cp;

  cp.conn_handle = htobs(conn_handle);
  cp.start_attr_handle = htobs(start_attr_handle);
  cp.end_attr_handle = htobs(end_attr_handle);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_DISC_ALL_CHARAC_OF_SERV;
  rq.cparam = &cp;
  rq.clen = GATT_DISC_ALL_CHARAC_OF_SERV_CP_SIZE;
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:25，代码来源:bluenrg_gatt_aci.c

示例10: aci_gap_set_non_connectable

tBleStatus aci_gap_set_non_connectable(uint8_t adv_type)
#endif
{
  struct hci_request rq;
  gap_set_non_connectable_cp cp;    
  uint8_t status;
    
  cp.advertising_event_type = adv_type;  
#if BLUENRG_MS
  cp.own_address_type = own_address_type;
#endif

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_SET_NON_CONNECTABLE;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.rparam = &status;
  rq.rlen = 1;
  
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;
  
  return status;
}

开发者ID:LeoNiz，项目名称:BLE-projet，代码行数:25，代码来源:bluenrg_gap_aci.c

示例11: aci_gatt_disc_prim_service_by_uuid

tBleStatus aci_gatt_disc_prim_service_by_uuid(uint16_t conn_handle, uint8_t uuid_type, uint8_t* uuid)
{
  struct hci_request rq;
  uint8_t status;
  gatt_disc_prim_service_by_uuid_cp cp;
  uint8_t uuid_len;
  
  if(uuid_type == UUID_TYPE_16){
    uuid_len = 2;
  }
  else{
    uuid_len = 16;
  }

  cp.conn_handle = htobs(conn_handle);
  cp.uuid_type = uuid_type;
  Osal_MemCpy(cp.uuid, uuid, uuid_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_DISC_PRIM_SERVICE_BY_UUID;
  rq.cparam = &cp;
  rq.clen = GATT_DISC_PRIM_SERVICE_BY_UUID_CP_SIZE + uuid_len;
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:32，代码来源:bluenrg_gatt_aci.c

示例12: aci_gatt_find_included_services

tBleStatus aci_gatt_find_included_services(uint16_t conn_handle, uint16_t start_service_handle, 
					   uint16_t end_service_handle)
{
  struct hci_request rq;
  uint8_t status;
  gatt_find_included_services_cp cp;

  cp.conn_handle = htobs(conn_handle);
  cp.start_handle = htobs(start_service_handle);
  cp.end_handle = htobs(end_service_handle);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_FIND_INCLUDED_SERVICES;
  rq.cparam = &cp;
  rq.clen = GATT_FIND_INCLUDED_SERVICES_CP_SIZE;
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:25，代码来源:bluenrg_gatt_aci.c

示例13: aci_att_prepare_write_req

tBleStatus aci_att_prepare_write_req(uint16_t conn_handle, uint16_t attr_handle, uint16_t value_offset,
                                    uint8_t  attr_val_len, uint8_t* attr_val)
{
  struct hci_request rq;
  uint8_t status;
  att_prepare_write_req_cp cp;
  
  if(attr_val_len > sizeof(cp.attr_val))
    return BLE_STATUS_INVALID_PARAMS;

  cp.conn_handle = htobs(conn_handle);
  cp.attr_handle = htobs(attr_handle);
  cp.value_offset = htobs(value_offset);
  cp.attr_val_len = attr_val_len;
  Osal_MemCpy(cp.attr_val, attr_val, attr_val_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_ATT_PREPARE_WRITE_REQ;
  rq.cparam = &cp;
  rq.clen = ATT_PREPARE_WRITE_REQ_CP_SIZE + attr_val_len;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:29，代码来源:bluenrg_gatt_aci.c

示例14: aci_att_read_by_group_type_req

tBleStatus aci_att_read_by_group_type_req(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle,
                                    uint8_t  uuid_type, uint8_t* uuid)
{
  struct hci_request rq;
  uint8_t status;
  att_read_by_group_type_req_cp cp;
  uint8_t uuid_len;
  
  if(uuid_type == UUID_TYPE_16){
    uuid_len = 2;
  }
  else{
    uuid_len = 16;
  }

  cp.conn_handle = htobs(conn_handle);
  cp.start_handle = htobs(start_handle);
  cp.end_handle = htobs(end_handle);
  cp.uuid_type = uuid_type;
  Osal_MemCpy(cp.uuid, uuid, uuid_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_ATT_READ_BY_GROUP_TYPE_REQ;
  rq.cparam = &cp;
  rq.clen = ATT_READ_BY_GROUP_TYPE_REQ_CP_SIZE + uuid_len;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:34，代码来源:bluenrg_gatt_aci.c

示例15: aci_att_find_by_type_value_req

tBleStatus aci_att_find_by_type_value_req(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle,
                                          uint8_t* uuid, uint8_t attr_val_len, uint8_t* attr_val)
{
  struct hci_request rq;
  uint8_t status;
  att_find_by_type_value_req_cp cp;
  
  if(attr_val_len > sizeof(cp.attr_val))
    return BLE_STATUS_INVALID_PARAMS;

  cp.conn_handle = htobs(conn_handle);
  cp.start_handle = htobs(start_handle);
  cp.end_handle = htobs(end_handle);
  Osal_MemCpy(cp.uuid, uuid, 2);
  cp.attr_val_len = attr_val_len;
  Osal_MemCpy(cp.attr_val, attr_val, attr_val_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_ATT_FIND_BY_TYPE_VALUE_REQ;
  rq.cparam = &cp;
  rq.clen = ATT_FIND_BY_TYPE_VALUE_REQ_CP_SIZE + attr_val_len;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:30，代码来源:bluenrg_gatt_aci.c

示例16: aci_gap_start_observation_procedure

tBleStatus aci_gap_start_observation_procedure(uint16_t scan_interval, uint16_t scan_window, uint8_t scan_type,
						 uint8_t own_address_type, uint8_t filter_duplicates)
{
  struct hci_request rq;
  gap_start_observation_proc_cp cp;
  uint8_t status;
  
  cp.scan_interval = scan_interval;
  cp.scan_window = scan_window;
  cp.scan_type = scan_type;
  cp.own_address_type = own_address_type;
  cp.filter_duplicates = filter_duplicates;

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_START_OBSERVATION_PROC;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;
  
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:LeoNiz，项目名称:BLE-projet，代码行数:27，代码来源:bluenrg_gap_aci.c

示例17: aci_gatt_disc_all_charac_descriptors

tBleStatus aci_gatt_disc_all_charac_descriptors(uint16_t conn_handle, uint16_t char_val_handle, 
						uint16_t char_end_handle)
{
  struct hci_request rq;
  uint8_t status;
  gatt_disc_all_charac_descriptors_cp cp;

  cp.conn_handle = htobs(conn_handle);
  cp.char_val_handle = htobs(char_val_handle);
  cp.char_end_handle = htobs(char_end_handle);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_DISC_ALL_CHARAC_DESCRIPTORS;
  rq.cparam = &cp;
  rq.clen = GATT_DISC_ALL_CHARAC_DESCRIPTORS_CP_SIZE;
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:25，代码来源:bluenrg_gatt_aci.c

示例18: aci_gap_set_direct_connectable

tBleStatus aci_gap_set_direct_connectable(uint8_t own_addr_type, uint8_t initiator_addr_type, const uint8_t *initiator_addr)
#endif
{
  struct hci_request rq;
  gap_set_direct_conectable_cp cp;
  uint8_t status;    

  cp.own_bdaddr_type = own_addr_type;
#if BLUENRG_MS
  cp.directed_adv_type = directed_adv_type;
#endif  
  cp.direct_bdaddr_type = initiator_addr_type;
  Osal_MemCpy(cp.direct_bdaddr, initiator_addr, 6);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_SET_DIRECT_CONNECTABLE;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.rparam = &status;
  rq.rlen = 1;
    
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;
    
  return status;
}

开发者ID:LeoNiz，项目名称:BLE-projet，代码行数:27，代码来源:bluenrg_gap_aci.c

示例19: aci_gatt_read_using_charac_uuid

tBleStatus aci_gatt_read_using_charac_uuid(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle,
                                    uint8_t  uuid_type, uint8_t* uuid)
{
  struct hci_request rq;
  uint8_t status;
  gatt_read_using_charac_uuid_cp cp;
  uint8_t uuid_len;
  
  if(uuid_type == UUID_TYPE_16){
    uuid_len = 2;
  }
  else{
    uuid_len = 16;
  }

  cp.conn_handle = htobs(conn_handle);
  cp.start_handle = htobs(start_handle);
  cp.end_handle = htobs(end_handle);
  cp.uuid_type = uuid_type;
  Osal_MemCpy(cp.uuid, uuid, uuid_len);

  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GATT_READ_USING_CHARAC_UUID;
  rq.cparam = &cp;
  rq.clen = GATT_READ_USING_CHARAC_UUID_CP_SIZE + uuid_len;
  rq.rparam = &status;
  rq.rlen = 1;

  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;
}

开发者ID:ARMmbed，项目名称:apm-watch-tracker，代码行数:34，代码来源:bluenrg_gatt_aci.c

示例20: aci_gap_slave_security_request

tBleStatus aci_gap_slave_security_request(uint16_t conn_handle, uint8_t bonding, uint8_t mitm_protection)
{
  struct hci_request rq;
  gap_slave_security_request_cp cp;
  uint8_t status;

  cp.conn_handle = htobs(conn_handle);
  cp.bonding = bonding;
  cp.mitm_protection = mitm_protection;
  
  Osal_MemSet(&rq, 0, sizeof(rq));
  rq.ogf = OGF_VENDOR_CMD;
  rq.ocf = OCF_GAP_SLAVE_SECURITY_REQUEST;
  rq.cparam = &cp;
  rq.clen = sizeof(cp);
  rq.event = EVT_CMD_STATUS;
  rq.rparam = &status;
  rq.rlen = 1;
  
  if (hci_send_req(&rq, FALSE) < 0)
    return BLE_STATUS_TIMEOUT;

  return status;

}

开发者ID:LeoNiz，项目名称:BLE-projet，代码行数:25，代码来源:bluenrg_gap_aci.c

注：本文中的Osal_MemSet函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。