• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ OVERFLOW_ERROR函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中OVERFLOW_ERROR函数的典型用法代码示例。如果您正苦于以下问题：C++ OVERFLOW_ERROR函数的具体用法？C++ OVERFLOW_ERROR怎么用？C++ OVERFLOW_ERROR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了OVERFLOW_ERROR函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: gsl_sf_bessel_I0_e

int gsl_sf_bessel_I0_e(const double x, gsl_sf_result * result)
{
  double y = fabs(x);

  /* CHECK_POINTER(result) */

  if(y < 2.0 * GSL_SQRT_DBL_EPSILON) {
    result->val = 1.0;
    result->err = 0.5*y*y;
    return GSL_SUCCESS;
  }
  else if(y <= 3.0) {
    gsl_sf_result c;
    cheb_eval_e(&bi0_cs, y*y/4.5-1.0, &c);
    result->val  = 2.75 + c.val;
    result->err  = GSL_DBL_EPSILON * (2.75 + fabs(c.val));
    result->err += c.err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(y < GSL_LOG_DBL_MAX - 1.0) {
    const double ey = exp(y);
    gsl_sf_result b_scaled;
    gsl_sf_bessel_I0_scaled_e(x, &b_scaled);
    result->val  = ey * b_scaled.val;
    result->err  = ey * b_scaled.err + y*GSL_DBL_EPSILON*fabs(result->val);
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    OVERFLOW_ERROR(result);
  }
}
开发者ID:lemahdi，项目名称:mglib，代码行数:33，代码来源:bessel_I0.c


示例2: gsl_sf_bessel_K1_e

int gsl_sf_bessel_K1_e(const double x, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(x <= 0.0) {
    DOMAIN_ERROR(result);
  }
  else if(x < 2.0*GSL_DBL_MIN) {
    OVERFLOW_ERROR(result);
  }
  else if(x <= 2.0) {
    const double lx = log(x);
    int stat_I1;
    gsl_sf_result I1;
    gsl_sf_result c;
    cheb_eval_e(&bk1_cs, 0.5*x*x-1.0, &c);
    stat_I1 = gsl_sf_bessel_I1_e(x, &I1);
    result->val  = (lx-M_LN2)*I1.val + (0.75 + c.val)/x;
    result->err  = c.err/x + fabs(lx)*I1.err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return stat_I1;
  }
  else {
    gsl_sf_result K1_scaled;
    int stat_K1 = gsl_sf_bessel_K1_scaled_e(x, &K1_scaled);
    int stat_e  = gsl_sf_exp_mult_err_e(-x, 0.0,
                                           K1_scaled.val, K1_scaled.err,
					   result);
    result->err = fabs(result->val) * (GSL_DBL_EPSILON*fabs(x) + K1_scaled.err/K1_scaled.val);
    return GSL_ERROR_SELECT_2(stat_e, stat_K1);
  }
}
开发者ID:ICML14MoMCompare，项目名称:spectral-learn，代码行数:32，代码来源:bessel_K1.c


示例3: hyperg_0F1_bessel_I

/* Evaluate bessel_I(nu, x), allowing nu < 0.
 * This is fine here because we do not not allow
 * nu to be a negative integer.
 * x > 0.
 */
static
int
hyperg_0F1_bessel_I(const double nu, const double x, gsl_sf_result * result)
{
  if(x > GSL_LOG_DBL_MAX) {
    OVERFLOW_ERROR(result);
  }

  if(nu < 0.0) { 
    const double anu = -nu;
    const double s   = 2.0/M_PI * sin(anu*M_PI);
    const double ex  = exp(x);
    gsl_sf_result I;
    gsl_sf_result K;
    int stat_I = gsl_sf_bessel_Inu_scaled_e(anu, x, &I);
    int stat_K = gsl_sf_bessel_Knu_scaled_e(anu, x, &K);
    result->val  = ex * I.val + s * (K.val / ex);
    result->err  = ex * I.err + fabs(s * K.err/ex);
    result->err += fabs(s * (K.val/ex)) * GSL_DBL_EPSILON * anu * M_PI;
    return GSL_ERROR_SELECT_2(stat_K, stat_I);
  }
  else {
    const double ex  = exp(x);
    gsl_sf_result I;
    int stat_I = gsl_sf_bessel_Inu_scaled_e(nu, x, &I);
    result->val = ex * I.val;
    result->err = ex * I.err + GSL_DBL_EPSILON * fabs(result->val);
    return stat_I;
  }
}
开发者ID:ICML14MoMCompare，项目名称:spectral-learn，代码行数:35，代码来源:hyperg_0F1.c


示例4: gsl_sf_hypot_e

int
gsl_sf_hypot_e(const double x, const double y, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(x == 0.0 && y == 0.0) {
    result->val = 0.0;
    result->err = 0.0;
    return GSL_SUCCESS;
  }
  else {
    const double a = fabs(x);
    const double b = fabs(y);
    const double min = GSL_MIN_DBL(a,b);
    const double max = GSL_MAX_DBL(a,b);
    const double rat = min/max;
    const double root_term = sqrt(1.0 + rat*rat);

    if(max < GSL_DBL_MAX/root_term) {
      result->val = max * root_term;
      result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
      return GSL_SUCCESS;
    }
    else {
      OVERFLOW_ERROR(result);
    }
  }
}
开发者ID:Andy1985，项目名称:AntiSpam，代码行数:28，代码来源:trig.c


示例5: gsl_sf_hzeta_e

int gsl_sf_hzeta_e(const double s, const double q, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(s <= 1.0 || q <= 0.0) {
    DOMAIN_ERROR(result);
  }
  else {
    const double max_bits = 54.0;
    const double ln_term0 = -s * log(q);  

    if(ln_term0 < GSL_LOG_DBL_MIN + 1.0) {
      UNDERFLOW_ERROR(result);
    }
    else if(ln_term0 > GSL_LOG_DBL_MAX - 1.0) {
      OVERFLOW_ERROR (result);
    }
    else if((s > max_bits && q < 1.0) || (s > 0.5*max_bits && q < 0.25)) {
      result->val = pow(q, -s);
      result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
      return GSL_SUCCESS;
    }
    else if(s > 0.5*max_bits && q < 1.0) {
      const double p1 = pow(q, -s);
      const double p2 = pow(q/(1.0+q), s);
      const double p3 = pow(q/(2.0+q), s);
      result->val = p1 * (1.0 + p2 + p3);
      result->err = GSL_DBL_EPSILON * (0.5*s + 2.0) * fabs(result->val);
      return GSL_SUCCESS;
    }
    else {
      /* Euler-Maclaurin summation formula 
       * [Moshier, p. 400, with several typo corrections]
       */
      const int jmax = 12;
      const int kmax = 10;
      int j, k;
      const double pmax  = pow(kmax + q, -s);
      double scp = s;
      double pcp = pmax / (kmax + q);
      double ans = pmax*((kmax+q)/(s-1.0) + 0.5);

      for(k=0; k<kmax; k++) {
        ans += pow(k + q, -s);
      }

      for(j=0; j<=jmax; j++) {
        double delta = hzeta_c[j+1] * scp * pcp;
        ans += delta;
        if(fabs(delta/ans) < 0.5*GSL_DBL_EPSILON) break;
        scp *= (s+2*j+1)*(s+2*j+2);
        pcp /= (kmax + q)*(kmax + q);
      }

      result->val = ans;
      result->err = 2.0 * (jmax + 1.0) * GSL_DBL_EPSILON * fabs(ans);
      return GSL_SUCCESS;
    }
  }
}
开发者ID:AnnaFowler，项目名称:ExomeDepth，代码行数:60，代码来源:VP_zeta.c


示例6: bessel_yl_small_x

/* [Abramowitz+Stegun, 10.1.3]
 * with lmax=15, precision ~ 15D for x < 3
 *
 * checked OK [GJ] Wed May 13 15:41:25 MDT 1998
 */
static int bessel_yl_small_x(int l, const double x, gsl_sf_result * result)
{
    gsl_sf_result num_fact;
    double den = gsl_sf_pow_int(x, l+1);
    int stat_df = gsl_sf_doublefact_e(2*l-1, &num_fact);

    if(stat_df != GSL_SUCCESS || den == 0.0) {
        OVERFLOW_ERROR(result);
    }
    else {
        const int lmax = 200;
        double t = -0.5*x*x;
        double sum = 1.0;
        double t_coeff = 1.0;
        double t_power = 1.0;
        double delta;
        int i;
        for(i=1; i<=lmax; i++) {
            t_coeff /= i*(2*(i-l) - 1);
            t_power *= t;
            delta = t_power*t_coeff;
            sum += delta;
            if(fabs(delta/sum) < 0.5*GSL_DBL_EPSILON) break;
        }
        result->val = -num_fact.val/den * sum;
        result->err = GSL_DBL_EPSILON * fabs(result->val);

        return GSL_SUCCESS;
    }
}
开发者ID:connorimes，项目名称:parsec-3.0，代码行数:35，代码来源:bessel_y.c


示例7: gsl_sf_pochrel_e

int
gsl_sf_pochrel_e(const double a, const double x, gsl_sf_result * result)
{
  const double absx = fabs(x);
  const double absa = fabs(a);

  /* CHECK_POINTER(result) */

  if(absx > 0.1*absa || absx*log(GSL_MAX(absa,2.0)) > 0.1) {
    gsl_sf_result lnpoch;
    double sgn;
    int stat_poch = gsl_sf_lnpoch_sgn_e(a, x, &lnpoch, &sgn);
    if(lnpoch.val > GSL_LOG_DBL_MAX) {
      OVERFLOW_ERROR(result);
    }
    else {
      const double el = exp(lnpoch.val);
      result->val  = (sgn*el - 1.0)/x;
      result->err  = fabs(result->val) * (lnpoch.err + 2.0 * GSL_DBL_EPSILON);
      result->err += 2.0 * GSL_DBL_EPSILON * (fabs(sgn*el) + 1.0) / fabs(x);
      return stat_poch;
    }
  }
  else {
    return pochrel_smallx(a, x, result);
  }
}
开发者ID:georgiee，项目名称:lip-sync-lpc，代码行数:27，代码来源:gsl_sf__poch.c


示例8: gsl_sf_expm1_e

int gsl_sf_expm1_e(const double x, gsl_sf_result * result)
{
  const double cut = 0.002;

  if(x < GSL_LOG_DBL_MIN) {
    result->val = -1.0;
    result->err = GSL_DBL_EPSILON;
    return GSL_SUCCESS;
  }
  else if(x < -cut) {
    result->val = exp(x) - 1.0;
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < cut) {
    result->val = x * (1.0 + 0.5*x*(1.0 + x/3.0*(1.0 + 0.25*x*(1.0 + 0.2*x))));
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  } 
  else if(x < GSL_LOG_DBL_MAX) {
    result->val = exp(x) - 1.0;
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    OVERFLOW_ERROR(result);
  }
}
开发者ID:altoplano，项目名称:RICO，代码行数:28，代码来源:exp.c


示例9: gsl_sf_exprel_2_e

int gsl_sf_exprel_2_e(double x, gsl_sf_result * result)
{
  const double cut = 0.002;

  if(x < GSL_LOG_DBL_MIN) {
    result->val = -2.0/x*(1.0 + 1.0/x);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < -cut) {
    result->val = 2.0*(exp(x) - 1.0 - x)/(x*x);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < cut) {
    result->val = (1.0 + 1.0/3.0*x*(1.0 + 0.25*x*(1.0 + 0.2*x*(1.0 + 1.0/6.0*x))));
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  } 
  else if(x < GSL_LOG_DBL_MAX) {
    result->val = 2.0*(exp(x) - 1.0 - x)/(x*x);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    OVERFLOW_ERROR(result);
  }
}
开发者ID:altoplano，项目名称:RICO，代码行数:28，代码来源:exp.c


示例10: gsl_sf_multiply_e

int
gsl_sf_multiply_e(const double x, const double y, gsl_sf_result * result)
{
  const double ax = fabs(x);
  const double ay = fabs(y);

  if(x == 0.0 || y == 0.0) {
    /* It is necessary to eliminate this immediately.
     */
    result->val = 0.0;
    result->err = 0.0;
    return GSL_SUCCESS;
  }
  else if((ax <= 1.0 && ay >= 1.0) || (ay <= 1.0 && ax >= 1.0)) {
    /* Straddling 1.0 is always safe.
     */
    result->val = x*y;
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    const double f = 1.0 - 2.0 * GSL_DBL_EPSILON;
    const double min = GSL_MIN_DBL(fabs(x), fabs(y));
    const double max = GSL_MAX_DBL(fabs(x), fabs(y));
    if(max < 0.9 * GSL_SQRT_DBL_MAX || min < (f * DBL_MAX)/max) {
      result->val = GSL_COERCE_DBL(x*y);
      result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
      CHECK_UNDERFLOW(result);
      return GSL_SUCCESS;
    }
    else {
      OVERFLOW_ERROR(result);
    }
  }
}
开发者ID:georgiee，项目名称:lip-sync-lpc，代码行数:35，代码来源:gsl_sf__elementary.c


示例11: gsl_sf_fermi_dirac_2_e

int gsl_sf_fermi_dirac_2_e(const double x, gsl_sf_result * result)
{
  if(x < GSL_LOG_DBL_MIN) {
    UNDERFLOW_ERROR(result);
  }
  else if(x < -1.0) {
    /* series [Goano (6)]
     */
    double ex   = exp(x);
    double term = ex;
    double sum  = term;
    int n;
    for(n=2; n<100 ; n++) {
      double rat = (n-1.0)/n;
      term *= -ex * rat * rat * rat;
      sum  += term;
      if(fabs(term/sum) < GSL_DBL_EPSILON) break;
    }
    result->val = sum;
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(sum);
    return GSL_SUCCESS;
  }
  else if(x < 1.0) {
    return cheb_eval_e(&fd_2_a_cs, x, result);
  }
  else if(x < 4.0) {
    double t = 2.0/3.0*(x-1.0) - 1.0;
    return cheb_eval_e(&fd_2_b_cs, t, result);
  }
  else if(x < 10.0) {
    double t = 1.0/3.0*(x-4.0) - 1.0;
    return cheb_eval_e(&fd_2_c_cs, t, result);
  }
  else if(x < 30.0) {
    double t = 0.1*x - 2.0;
    gsl_sf_result c;
    cheb_eval_e(&fd_2_d_cs, t, &c);
    result->val  = c.val * x*x*x;
    result->err  = c.err * x*x*x + 3.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < 1.0/GSL_ROOT3_DBL_EPSILON) {
    double t = 60.0/x - 1.0;
    gsl_sf_result c;
    cheb_eval_e(&fd_2_e_cs, t, &c);
    result->val = c.val * x*x*x;
    result->err = c.err * x*x*x + 3.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < GSL_ROOT3_DBL_MAX) {
    result->val = 1.0/6.0 * x*x*x;
    result->err = 3.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    OVERFLOW_ERROR(result);
  }
}
开发者ID:nchaimov，项目名称:m3l-af，代码行数:58，代码来源:fermi_dirac.c


示例12: gsl_sf_bessel_Y1_e

int gsl_sf_bessel_Y1_e(const double x, gsl_sf_result * result)
{
  const double two_over_pi = 2.0/M_PI;
  const double xmin = 1.571*GSL_DBL_MIN; /*exp ( amax1(alog(r1mach(1)), -alog(r1mach(2)))+.01) */
  const double x_small = 2.0 * GSL_SQRT_DBL_EPSILON;
  const double xmax    = 1.0/GSL_DBL_EPSILON;

  /* CHECK_POINTER(result) */

  if(x <= 0.0) {
    DOMAIN_ERROR(result);
  }
  else if(x < xmin) {
    OVERFLOW_ERROR(result);
  }
  else if(x < x_small) {
    const double lnterm = log(0.5*x);
    gsl_sf_result J1;
    gsl_sf_result c;
    int status = gsl_sf_bessel_J1_e(x, &J1);
    cheb_eval_e(&by1_cs, -1.0, &c);
    result->val = two_over_pi * lnterm * J1.val + (0.5 + c.val)/x;
    result->err = fabs(lnterm) * (fabs(GSL_DBL_EPSILON * J1.val) + J1.err) + c.err/x;
    return status;
  }
  else if(x < 4.0) {
    const double lnterm = log(0.5*x);
    int status;
    gsl_sf_result J1;
    gsl_sf_result c;
    cheb_eval_e(&by1_cs, 0.125*x*x-1.0, &c);
    status = gsl_sf_bessel_J1_e(x, &J1);
    result->val = two_over_pi * lnterm * J1.val + (0.5 + c.val)/x;
    result->err = fabs(lnterm) * (fabs(GSL_DBL_EPSILON * J1.val) + J1.err) + c.err/x;
    return status;
  }
  else if(x < xmax) {
    const double z = 32.0/(x*x) - 1.0;
    gsl_sf_result ca;
    gsl_sf_result ct;
    gsl_sf_result cp;
    const int stat_ca = cheb_eval_e(&_gsl_sf_bessel_amp_phase_bm1_cs,  z, &ca);
    const int stat_ct = cheb_eval_e(&_gsl_sf_bessel_amp_phase_bth1_cs, z, &ct);
    const int stat_cp = gsl_sf_bessel_cos_pi4_e(x, ct.val/x, &cp);
    const double sqrtx = sqrt(x);
    const double ampl  = (0.75 + ca.val) / sqrtx;
    result->val  = -ampl * cp.val;
    result->err  = fabs(cp.val) * ca.err/sqrtx + fabs(ampl) * cp.err;
    result->err += GSL_DBL_EPSILON * fabs(result->val);
    return GSL_ERROR_SELECT_3(stat_ca, stat_ct, stat_cp);
  }
  else {
    UNDERFLOW_ERROR(result);
  }
}
开发者ID:DsRQuicke，项目名称:praat，代码行数:55，代码来源:gsl_specfunc__bessel_Y1.c


示例13: expint_E2_impl

static
int expint_E2_impl(const double x, gsl_sf_result * result, const int scale)
{
  const double xmaxt = -GSL_LOG_DBL_MIN;
  const double xmax  = xmaxt - log(xmaxt);

  /* CHECK_POINTER(result) */

  if(x < -xmax && !scale) {
    OVERFLOW_ERROR(result);
  }
  else if (x == 0.0) {
    result->val = 1.0;
    result->err = 0.0;
    return GSL_SUCCESS;
  } else if(x < 100.0) {
    const double ex = ( scale ? 1.0 : exp(-x) );
    gsl_sf_result result_E1;
    int stat_E1 = expint_E1_impl(x, &result_E1, scale);
    result->val  = ex - x*result_E1.val;
    result->err  = GSL_DBL_EPSILON*ex + fabs(x) * result_E1.err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return stat_E1;
  }
  else if(x < xmax || scale) {
    const double s = ( scale ? 1.0 : exp(-x) );
    const double c1  = -2.0;
    const double c2  =  6.0;
    const double c3  = -24.0;
    const double c4  =  120.0;
    const double c5  = -720.0;
    const double c6  =  5040.0;
    const double c7  = -40320.0;
    const double c8  =  362880.0;
    const double c9  = -3628800.0;
    const double c10 =  39916800.0;
    const double c11 = -479001600.0;
    const double c12 =  6227020800.0;
    const double c13 = -87178291200.0;
    const double y = 1.0/x;
    const double sum6 = c6+y*(c7+y*(c8+y*(c9+y*(c10+y*(c11+y*(c12+y*c13))))));
    const double sum  = y*(c1+y*(c2+y*(c3+y*(c4+y*(c5+y*sum6)))));
    result->val = s * (1.0 + sum)/x;
    result->err = 2.0 * (x + 1.0) * GSL_DBL_EPSILON * result->val;
    if(result->val == 0.0)
      UNDERFLOW_ERROR(result);
    else
      return GSL_SUCCESS;
  }
  else {
    UNDERFLOW_ERROR(result);
  }
}
开发者ID:MesserLab，项目名称:SLiM，代码行数:53，代码来源:expint.c


示例14: Pyxmpz_inplace_rshift

static PyObject *
Pyxmpz_inplace_rshift(PyObject *a, PyObject *b)
{
    mpir_si temp_si;
    int overflow;

    if (PyIntOrLong_Check(b)) {
        temp_si = PyLong_AsSIAndOverflow(b, &overflow);
        if (overflow) {
            OVERFLOW_ERROR("outrageous shift count");
            return NULL;
        }
        else if(temp_si >= 0) {
            mpz_fdiv_q_2exp(Pyxmpz_AS_MPZ(a), Pyxmpz_AS_MPZ(a), temp_si);
            Py_INCREF(a);
            return a;
        }
        else {
            VALUE_ERROR("negative shift count");
            return NULL;
        }
    }

    if (CHECK_MPZANY(b)) {
        if (mpz_sgn(Pyxmpz_AS_MPZ(b)) < 0) {
            VALUE_ERROR("negative shift count");
            return NULL;
        }
        if (!mpz_fits_si_p(Pyxmpz_AS_MPZ(b))) {
            OVERFLOW_ERROR("outrageous shift count");
            return NULL;
        }
        temp_si = mpz_get_si(Pyxmpz_AS_MPZ(b));
        mpz_fdiv_q_2exp(Pyxmpz_AS_MPZ(a), Pyxmpz_AS_MPZ(a), temp_si);
        Py_INCREF(a);
        return a;
    }

    Py_RETURN_NOTIMPLEMENTED;
}
开发者ID:qsnake，项目名称:gmpy，代码行数:40，代码来源:gmpy_xmpz_inplace.c


示例15: gsl_sf_airy_Bi_deriv_e

int
gsl_sf_airy_Bi_deriv_e(const double x, gsl_mode_t mode, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(x < -1.0) {
    gsl_sf_result a;
    gsl_sf_result p;
    int status_ap = airy_deriv_mod_phase(x, mode, &a, &p);
    double s    = sin(p.val);
    result->val  = a.val * s;
    result->err  = fabs(result->val * p.err) + fabs(s * a.err);
    result->err += GSL_DBL_EPSILON * fabs(result->val);
    return status_ap;
  }
  else if(x < 1.0) {
    const double x3 = x*x*x;
    const double x2 = x*x;
    gsl_sf_result result_c1;
    gsl_sf_result result_c2;
    cheb_eval_mode_e(&bif_cs, x3, mode, &result_c1);
    cheb_eval_mode_e(&big_cs, x3, mode, &result_c2);
    result->val  = x2 * (result_c1.val + 0.25) + result_c2.val + 0.5;
    result->err  = x2 * result_c1.err + result_c2.err;
    result->err += GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < 2.0) {
    const double z = (2.0*x*x*x - 9.0) / 7.0;
    gsl_sf_result result_c1;
    gsl_sf_result result_c2;
    cheb_eval_mode_e(&bif2_cs, z, mode, &result_c1);
    cheb_eval_mode_e(&big2_cs, z, mode, &result_c2);
    result->val  = x*x * (result_c1.val + 0.25) + result_c2.val + 0.5;
    result->err  = x*x * result_c1.err + result_c2.err;
    result->err += GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else if(x < GSL_ROOT3_DBL_MAX*GSL_ROOT3_DBL_MAX) {
    gsl_sf_result result_bps;
    const double arg = 2.0*(x*sqrt(x)/3.0);
    int stat_b = gsl_sf_airy_Bi_deriv_scaled_e(x, mode, &result_bps);
    int stat_e = gsl_sf_exp_mult_err_e(arg, 1.5*fabs(arg*GSL_DBL_EPSILON),
                                          result_bps.val, result_bps.err,
                                          result);
    return GSL_ERROR_SELECT_2(stat_e, stat_b);
  }
  else {
    OVERFLOW_ERROR(result);
  }
}
开发者ID:BrianGladman，项目名称:gsl，代码行数:51，代码来源:airy_der.c


示例16: gsl_sf_exp_e

int gsl_sf_exp_e(const double x, gsl_sf_result * result)
{
  if(x > GSL_LOG_DBL_MAX) {
    OVERFLOW_ERROR(result);
  }
  else if(x < GSL_LOG_DBL_MIN) {
    UNDERFLOW_ERROR(result);
  }
  else {
    result->val = exp(x);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
}
开发者ID:altoplano，项目名称:RICO，代码行数:14，代码来源:exp.c


示例17: gsl_sf_exp_mult_err_e

int gsl_sf_exp_mult_err_e(const double x, const double dx,
                             const double y, const double dy,
                             gsl_sf_result * result)
{
  const double ay  = fabs(y);

  if(y == 0.0) {
    result->val = 0.0;
    result->err = fabs(dy * exp(x));
    return GSL_SUCCESS;
  }
  else if(   ( x < 0.5*GSL_LOG_DBL_MAX   &&   x > 0.5*GSL_LOG_DBL_MIN)
          && (ay < 0.8*GSL_SQRT_DBL_MAX  &&  ay > 1.2*GSL_SQRT_DBL_MIN)
    ) {
    double ex = exp(x);
    result->val  = y * ex;
    result->err  = ex * (fabs(dy) + fabs(y*dx));
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    const double ly  = log(ay);
    const double lnr = x + ly;

    if(lnr > GSL_LOG_DBL_MAX - 0.01) {
      OVERFLOW_ERROR(result);
    }
    else if(lnr < GSL_LOG_DBL_MIN + 0.01) {
      UNDERFLOW_ERROR(result);
    }
    else {
      const double sy  = GSL_SIGN(y);
      const double M   = floor(x);
      const double N   = floor(ly);
      const double a   = x  - M;
      const double b   = ly - N;
      const double eMN = exp(M+N);
      const double eab = exp(a+b);
      result->val  = sy * eMN * eab;
      result->err  = eMN * eab * 2.0*GSL_DBL_EPSILON;
      result->err += eMN * eab * fabs(dy/y);
      result->err += eMN * eab * fabs(dx);
      return GSL_SUCCESS;
    }
  }
}
开发者ID:altoplano，项目名称:RICO，代码行数:46，代码来源:exp.c


示例18: gsl_sf_bessel_k1_scaled_e

int gsl_sf_bessel_k1_scaled_e(const double x, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(x <= 0.0) {
    DOMAIN_ERROR(result);
  }
  else if(x < (M_SQRTPI+1.0)/(M_SQRT2*GSL_SQRT_DBL_MAX)) {
    OVERFLOW_ERROR(result);
  }
  else {
    result->val = M_PI/(2.0*x) * (1.0 + 1.0/x);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    CHECK_UNDERFLOW(result);
    return GSL_SUCCESS;
  }
}
开发者ID:nchaimov，项目名称:m3l-af，代码行数:17，代码来源:bessel_k.c


示例19: delta

static
int
delta(int ta, int tb, int tc, gsl_sf_result * d)
{
  gsl_sf_result f1, f2, f3, f4;
  int status = 0;
  status += gsl_sf_fact_e((ta + tb - tc)/2, &f1);
  status += gsl_sf_fact_e((ta + tc - tb)/2, &f2);
  status += gsl_sf_fact_e((tb + tc - ta)/2, &f3);
  status += gsl_sf_fact_e((ta + tb + tc)/2 + 1, &f4);
  if(status != 0) {
    OVERFLOW_ERROR(d);
  }
  d->val = f1.val * f2.val * f3.val / f4.val;
  d->err = 4.0 * GSL_DBL_EPSILON * fabs(d->val);
  return GSL_SUCCESS;
}
开发者ID:tommyliu，项目名称:visionPJ1，代码行数:17，代码来源:coupling.c


示例20: gsl_sf_expint_E2_e

int gsl_sf_expint_E2_e(const double x, gsl_sf_result * result)
{
  const double xmaxt = -GSL_LOG_DBL_MIN;
  const double xmax  = xmaxt - log(xmaxt);

  /* CHECK_POINTER(result) */

  if(x < -xmax) {
    OVERFLOW_ERROR(result);
  }
  else if(x < 100.0) {
    const double ex = exp(-x);
    gsl_sf_result result_E1;
    int stat_E1 = gsl_sf_expint_E1_e(x, &result_E1);
    result->val  = ex - x*result_E1.val;
    result->err  = fabs(x) * (GSL_DBL_EPSILON*ex + result_E1.err);
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return stat_E1;
  }
  else if(x < xmax) {
    const double c1  = -2.0;
    const double c2  =  6.0;
    const double c3  = -24.0;
    const double c4  =  120.0;
    const double c5  = -720.0;
    const double c6  =  5040.0;
    const double c7  = -40320.0;
    const double c8  =  362880.0;
    const double c9  = -3628800.0;
    const double c10 =  39916800.0;
    const double c11 = -479001600.0;
    const double c12 =  6227020800.0;
    const double c13 = -87178291200.0;
    const double y = 1.0/x;
    const double sum6 = c6+y*(c7+y*(c8+y*(c9+y*(c10+y*(c11+y*(c12+y*c13))))));
    const double sum  = y*(c1+y*(c2+y*(c3+y*(c4+y*(c5+y*sum6)))));
    result->val = exp(-x) * (1.0 + sum)/x;
    result->err = 2.0 * (x + 1.0) * GSL_DBL_EPSILON * result->val;
    return GSL_SUCCESS;
  }
  else {
    UNDERFLOW_ERROR(result);
  }
}
开发者ID:ICML14MoMCompare，项目名称:spectral-learn，代码行数:44，代码来源:expint.c



注：本文中的OVERFLOW_ERROR函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ OVR_ASSERT函数代码示例发布时间：2022-05-30
下一篇：
C++ OUT_RELOC函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap