本文整理汇总了C++中OF_DEV_AUXDATA函数的典型用法代码示例。如果您正苦于以下问题:C++ OF_DEV_AUXDATA函数的具体用法?C++ OF_DEV_AUXDATA怎么用?C++ OF_DEV_AUXDATA使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了OF_DEV_AUXDATA函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: pr_err
if (IS_ERR(pclk)) {
pr_err("%s:couldn't get %s as parent for gpt\n",
__func__, pclk_name);
BUG();
}
clk_set_parent(gpt_clk, pclk);
clk_put(gpt_clk);
clk_put(pclk);
spear_setup_of_timer();
}
/* Add auxdata to pass platform data */
struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
{}
};
static void __init spear600_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
spear6xx_auxdata_lookup, NULL);
}
static const char *spear600_dt_board_compat[] = {
"st,spear600",
NULL
};
DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
开发者ID:Afek,项目名称:linux,代码行数:32,代码来源:spear6xx.c
示例2: OF_DEV_AUXDATA
*/
static struct pdata_init auxdata_quirks[] __initdata = {
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
#ifdef CONFIG_ARCH_OMAP4
开发者ID:21cnbao,项目名称:linux,代码行数:31,代码来源:pdata-quirks.c
示例3: msm_pm_sleep_status_init
msm_pm_sleep_status_init();
krait_power_init();
msm_clock_init(&msm8974_clock_init_data);
tsens_tm_init_driver();
msm_thermal_device_init();
lge_add_persistent_device();
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
init_bcm_wifi();
#endif
#if defined(CONFIG_LCD_KCAL)
lge_add_lcd_kcal_devices();
#endif
}
static struct of_dev_auxdata msm8974_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("qcom,hsusb-otg", 0xF9A55000, \
"msm_otg", NULL),
OF_DEV_AUXDATA("qcom,ehci-host", 0xF9A55000, \
"msm_ehci_host", NULL),
OF_DEV_AUXDATA("qcom,dwc-usb3-msm", 0xF9200000, \
"msm_dwc3", NULL),
OF_DEV_AUXDATA("qcom,usb-bam-msm", 0xF9304000, \
"usb_bam", NULL),
OF_DEV_AUXDATA("qcom,spi-qup-v2", 0xF9924000, \
"spi_qsd.1", NULL),
OF_DEV_AUXDATA("qcom,msm-sdcc", 0xF9824000, \
"msm_sdcc.1", NULL),
OF_DEV_AUXDATA("qcom,msm-sdcc", 0xF98A4000, \
"msm_sdcc.2", NULL),
OF_DEV_AUXDATA("qcom,msm-sdcc", 0xF9864000, \
"msm_sdcc.3", NULL),
OF_DEV_AUXDATA("qcom,msm-sdcc", 0xF98E4000, \
开发者ID:MattCrystal,项目名称:petulant-spice,代码行数:32,代码来源:board-8974-hammerhead.c
示例4: OF_DEV_AUXDATA
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{ }
};
struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
NULL),
OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
{},
};
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
开发者ID:Memphiz,项目名称:linux,代码行数:31,代码来源:board-dt.c
示例5: of_find_node_by_path
return;
node = of_find_node_by_path(path);
v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0));
if (arch_timer_of_register() != 0)
twd_local_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
}
static struct sys_timer v2m_dt_timer = {
.init = v2m_dt_timer_init,
};
static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash",
&v2m_flash_data),
OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data),
/* RS1 memory map */
OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash",
&v2m_flash_data),
OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data),
{}
};
static void __init v2m_dt_init(void)
{
l2x0_of_init(0x00400000, 0xfe0fffff);
of_platform_populate(NULL, of_default_bus_match_table,
v2m_dt_auxdata_lookup, NULL);
pm_power_off = v2m_power_off;
}
开发者ID:vineetnayak,项目名称:linux,代码行数:32,代码来源:v2m.c
示例6: OF_DEV_AUXDATA
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
struct omap_sr_data __maybe_unused omap_sr_pdata[OMAP_SR_NR];
static struct of_dev_auxdata omap_auxdata_lookup[] = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
"480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,
"480c9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
开发者ID:150balbes,项目名称:Amlogic_s905-kernel,代码行数:31,代码来源:pdata-quirks.c
示例7: mdelay
rm31080ts_macallan_data.platform_id = RM_PLATFORM_P005;
else
rm31080ts_macallan_data.platform_id = RM_PLATFORM_D010;
mdelay(20);
rm31080a_macallan_spi_board[0].irq = gpio_to_irq(TOUCH_GPIO_IRQ_RAYDIUM_SPI);
touch_init_raydium(TOUCH_GPIO_IRQ_RAYDIUM_SPI,
TOUCH_GPIO_RST_RAYDIUM_SPI,
&rm31080ts_macallan_data,
&rm31080a_macallan_spi_board[0],
ARRAY_SIZE(rm31080a_macallan_spi_board));
return 0;
}
#ifdef CONFIG_USE_OF
struct of_dev_auxdata macallan_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra114-sdhci", 0x78000600, "sdhci-tegra.3",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-sdhci", 0x78000400, "sdhci-tegra.2",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-sdhci", 0x78000000, "sdhci-tegra.0",
&macallan_tegra_sdhci_platform_data0),
OF_DEV_AUXDATA("nvidia,tegra114-camera", 0x0, "tegra_camera",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-host1x", TEGRA_HOST1X_BASE, "host1x",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-gr3d", TEGRA_GR3D_BASE, "gr3d",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-gr2d", TEGRA_GR2D_BASE, "gr2d",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-msenc", TEGRA_MSENC_BASE, "msenc",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-vi", TEGRA_VI_BASE, "vi",
开发者ID:Lloir,项目名称:nvidia-linux-3.10,代码行数:32,代码来源:board-macallan.c
示例8: platform_device_register
case TEGRA_BB_HSIC_HUB: /* HSIC hub */
if (!(usb_port_owner_info & HSIC1_PORT_OWNER_XUSB)) {
tegra_ehci2_device.dev.platform_data =
&tegra_ehci2_hsic_smsc_hub_pdata;
platform_device_register(&tegra_ehci2_device);
}
break;
default:
return;
}
}
#ifdef CONFIG_USE_OF
struct of_dev_auxdata loki_auxdata_lookup[] __initdata = {
T124_SPI_OF_DEV_AUXDATA,
OF_DEV_AUXDATA("nvidia,tegra124-apbdma", 0x60020000, "tegra-apbdma",
NULL),
OF_DEV_AUXDATA("nvidia,tegra124-se", 0x70012000, "tegra12-se", NULL),
OF_DEV_AUXDATA("nvidia,tegra124-host1x", TEGRA_HOST1X_BASE, "host1x",
NULL),
OF_DEV_AUXDATA("nvidia,tegra124-gk20a", TEGRA_GK20A_BAR0_BASE,
"gk20a.0", NULL),
#ifdef CONFIG_ARCH_TEGRA_VIC
OF_DEV_AUXDATA("nvidia,tegra124-vic", TEGRA_VIC_BASE, "vic03.0", NULL),
#endif
OF_DEV_AUXDATA("nvidia,tegra124-msenc", TEGRA_MSENC_BASE, "msenc",
NULL),
OF_DEV_AUXDATA("nvidia,tegra124-vi", TEGRA_VI_BASE, "vi.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra124-isp", TEGRA_ISP_BASE, "isp.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra124-isp", TEGRA_ISPB_BASE, "isp.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra124-tsec", TEGRA_TSEC_BASE, "tsec", NULL),
OF_DEV_AUXDATA("nvidia,tegra114-hsuart", 0x70006000, "serial-tegra.0",
开发者ID:ScienceXChina,项目名称:JetsonTK1-Kernel-Grinch,代码行数:32,代码来源:board-loki.c
示例9: readl
readl((u32 *)uid+0),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
iounmap(uid);
}
static struct device * __init db8500_soc_device_init(void)
{
const char *soc_id = db8500_read_soc_id();
return ux500_soc_device_init(soc_id);
}
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
"ux500-msp-i2s.1", &msp1_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
"ux500-msp-i2s.2", &msp2_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
/* Requires non-DT:able platform data. */
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
开发者ID:01org,项目名称:prd,代码行数:31,代码来源:cpu-db8500.c
示例10: OF_DEV_AUXDATA
#include <mach/gpiomux.h>
#include <mach/msm_iomap.h>
#include <mach/msm_memtypes.h>
#include <soc/qcom/restart.h>
#include <soc/qcom/socinfo.h>
#include <soc/qcom/rpm-smd.h>
#include <soc/qcom/smd.h>
#include <soc/qcom/smem.h>
#include <soc/qcom/spm.h>
#include <soc/qcom/pm.h>
#include "board-dt.h"
#include "clock.h"
#include "platsmp.h"
static struct of_dev_auxdata apq8084_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("qca,qca1530", 0x00000000, "qca1530.1", NULL),
OF_DEV_AUXDATA("qcom,xhci-msm-hsic", 0xf9c00000, "msm_hsic_host", NULL),
OF_DEV_AUXDATA("qcom,msm_pcie", 0xFC520000, "msm_pcie.1", NULL),
OF_DEV_AUXDATA("qcom,msm_pcie", 0xFC528000, "msm_pcie.2", NULL),
{}
};
void __init apq8084_reserve(void)
{
of_scan_flat_dt(dt_scan_for_memory_reserve, NULL);
}
/*
* Used to satisfy dependencies for devices that need to be
* run early or in a particular order. Most likely your device doesn't fall
* into this category, and thus the driver should not be added here. The
开发者ID:4Fwolf,项目名称:xiaomi_kernel_Redmi3,代码行数:31,代码来源:board-8084.c
示例11: mmp_dt_irq_init
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/irqs.h>
#include <mach/regs-apbc.h>
#include "common.h"
extern void __init mmp_dt_irq_init(void);
extern void __init mmp_dt_init_timer(void);
static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL),
OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
{}
};
static void __init mmp2_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
mmp2_auxdata_lookup, NULL);
}
开发者ID:0x000000FF,项目名称:Linux4Edison,代码行数:31,代码来源:mmp2-dt.c
示例12: MACHINE_START
.init_machine = hrefv60_init_machine,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
.init_machine = snowball_init_machine,
MACHINE_END
#ifdef CONFIG_MACH_UX500_DT
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
{},
};
static const struct of_device_id u8500_soc_node[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
{ },
};
static void __init u8500_init_machine(void)
{
struct device *parent = NULL;
开发者ID:davidmueller13,项目名称:valexKernel-lt03wifi,代码行数:31,代码来源:board-mop500.c
示例13: OF_DEV_AUXDATA
static struct amba_pl011_data spear320_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
},
};
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
&spear320_ssp_data[0]),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
&spear320_ssp_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
&spear320_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
&spear320_uart_data[1]),
{}
};
static void __init spear320_dt_init(void)
{
开发者ID:7L,项目名称:pi_plus,代码行数:31,代码来源:spear320.c
示例14: OF_DEV_AUXDATA
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/mx51.h>
/*
* Lookup table for attaching a specific name and platform_data pointer to
* devices as they get created by of_platform_populate(). Ideally this table
* would not exist, but the current clock implementation depends on some devices
* having a specific name.
*/
static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
{ /* sentinel */ }
开发者ID:AceKatz,项目名称:networking_research,代码行数:31,代码来源:imx51-dt.c
示例15: da8xx_init_irq
#include <mach/da8xx.h>
#define DA8XX_NUM_UARTS 3
static struct of_device_id da8xx_irq_match[] __initdata = {
{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
{ }
};
static void __init da8xx_init_irq(void)
{
of_irq_init(da8xx_irq_match);
}
static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL),
OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL),
OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
NULL),
{}
开发者ID:01org,项目名称:KVMGT-kernel,代码行数:31,代码来源:da8xx-dt.c
示例16: device_tree_init
}
void __init device_tree_init(void)
{
if (!initial_boot_params)
return;
unflatten_and_copy_device_tree();
}
static struct pic32_sdhci_platform_data sdhci_data = {
.setup_dma = pic32_set_sdhci_adma_fifo_threshold,
};
static struct of_dev_auxdata pic32_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("microchip,pic32mzda-sdhci", 0, "sdhci", &sdhci_data),
{ /* sentinel */}
};
static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
{
struct device_node *root, *np;
struct resource res;
root = of_find_node_by_path("/");
for (; lookup->compatible; lookup++) {
np = of_find_compatible_node(NULL, NULL, lookup->compatible);
if (np) {
lookup->name = (char *)np->name;
if (lookup->phys_addr)
开发者ID:020gzh,项目名称:linux,代码行数:31,代码来源:init.c
示例17: pr_err
pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
}
static inline void imx6q_enet_init(void)
{
imx6_enet_mac_init("fsl,imx6q-fec");
imx6q_enet_phy_init();
imx6q_1588_init();
if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
imx6q_enet_clk_sel();
imx6q_enet_plt_init();
}
/* Add auxdata to pass platform data */
static const struct of_dev_auxdata imx6q_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx6q-flexcan", 0x02090000, NULL, &flexcan_pdata[0]),
OF_DEV_AUXDATA("fsl,imx6q-flexcan", 0x02094000, NULL, &flexcan_pdata[1]),
OF_DEV_AUXDATA("fsl,imx6q-fec", 0x02188000, NULL, &fec_pdata),
{ /* sentinel */ }
};
static void __init imx6q_init_machine(void)
{
struct device *parent;
if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
else
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx_get_soc_revision());
开发者ID:czc0713,项目名称:imx6Q,代码行数:30,代码来源:mach-imx6q.c
示例18: tegra_tegranote7c_early_init
return 0;
}
static void __init tegra_tegranote7c_early_init(void)
{
tegra_clk_init_from_table(tegranote7c_clk_init_table);
tegra_clk_verify_parents();
tegra_soc_device_init("tegranote7c");
#if defined(CONFIG_TEGRA_IOVMM_SMMU) || defined(CONFIG_TEGRA_IOMMU_SMMU)
platform_device_register(&tegra_smmu_device);
#endif
}
#ifdef CONFIG_USE_OF
struct of_dev_auxdata tegranote7c_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra114-host1x", TEGRA_HOST1X_BASE, "host1x",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-gr3d", TEGRA_GR3D_BASE, "gr3d",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-gr2d", TEGRA_GR2D_BASE, "gr2d",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-msenc", TEGRA_MSENC_BASE, "msenc",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-vi", TEGRA_VI_BASE, "vi",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-isp", TEGRA_ISP_BASE, "isp",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-tsec", TEGRA_TSEC_BASE, "tsec",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-pwfm", TEGRA_PWFM0_BASE, "tegra_pwm.0",
NULL),
OF_DEV_AUXDATA("nvidia,tegra114-pwfm", TEGRA_PWFM1_BASE, "tegra_pwm.1",
开发者ID:Shaky156,项目名称:Tegra-Note-7,代码行数:32,代码来源:board-tegranote7c.c
示例19: OF_DEV_AUXDATA
*/
static struct pdata_init auxdata_quirks[] __initdata = {
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
/* McBSP modules with sidetone core */
#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
开发者ID:12zz,项目名称:linux,代码行数:31,代码来源:pdata-quirks.c
示例20: OF_DEV_AUXDATA
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include "board.h"
#include "clock.h"
#include "common.h"
#ifdef CONFIG_USE_OF
static struct of_device_id tegra_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{}
};
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000600, "sdhci-tegra.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C000, "tegra-i2c.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C400, "tegra-i2c.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
{}
};
static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 408000000, true },
{ NULL, NULL, 0, 0},
开发者ID:0xroot,项目名称:Blackphone-BP1-Kernel,代码行数:31,代码来源:board-dt-tegra30.c
注:本文中的OF_DEV_AUXDATA函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论