• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ ODM_RT_TRACE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中ODM_RT_TRACE函数的典型用法代码示例。如果您正苦于以下问题：C++ ODM_RT_TRACE函数的具体用法？C++ ODM_RT_TRACE怎么用？C++ ODM_RT_TRACE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了ODM_RT_TRACE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ODM_AntennaDiversity_88E

void ODM_AntennaDiversity_88E(struct odm_dm_struct *dm_odm)
{
	struct fast_ant_train *dm_fat_tbl = &dm_odm->DM_FatTable;
	struct adapter *adapter = dm_odm->Adapter;

	if (!(dm_odm->SupportAbility & ODM_BB_ANT_DIV))
		return;
	if (!dm_odm->bLinked) {
		ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("ODM_AntennaDiversity_88E(): No Link.\n"));
		if (dm_fat_tbl->bBecomeLinked) {
			ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("Need to Turn off HW AntDiv\n"));
			PHY_SetBBReg(adapter, ODM_REG_IGI_A_11N, BIT7, 0);	/* RegC50[7]=1'b1		enable HW AntDiv */
			PHY_SetBBReg(adapter, ODM_REG_CCK_ANTDIV_PARA1_11N, BIT15, 0); /* Enable CCK AntDiv */
			if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV)
				PHY_SetBBReg(adapter, ODM_REG_TX_ANT_CTRL_11N, BIT21, 0); /* Reg80c[21]=1'b0		from TX Reg */
			dm_fat_tbl->bBecomeLinked = dm_odm->bLinked;
		}
		return;
	} else {
		if (!dm_fat_tbl->bBecomeLinked) {
			ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("Need to Turn on HW AntDiv\n"));
			/* Because HW AntDiv is disabled before Link, we enable HW AntDiv after link */
			PHY_SetBBReg(adapter, ODM_REG_IGI_A_11N, BIT7, 1);	/* RegC50[7]=1'b1		enable HW AntDiv */
			PHY_SetBBReg(adapter, ODM_REG_CCK_ANTDIV_PARA1_11N, BIT15, 1); /* Enable CCK AntDiv */
			if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV)
				PHY_SetBBReg(adapter, ODM_REG_TX_ANT_CTRL_11N, BIT21, 1); /* Reg80c[21]=1'b1		from TX Info */
			dm_fat_tbl->bBecomeLinked = dm_odm->bLinked;
		}
	}
	if ((dm_odm->AntDivType == CG_TRX_HW_ANTDIV) || (dm_odm->AntDivType == CGCS_RX_HW_ANTDIV))
		odm_HWAntDiv(dm_odm);
}
开发者ID:7799，项目名称:linux，代码行数:32，代码来源:odm_RTL8188E.c


示例2: odm_is_edca_turbo_disable

/* check if edca turbo is disabled */
boolean
odm_is_edca_turbo_disable(
	void		*p_dm_void
)
{
	struct PHY_DM_STRUCT		*p_dm_odm = (struct PHY_DM_STRUCT *)p_dm_void;
	struct _ADAPTER		*adapter = p_dm_odm->adapter;
	PMGNT_INFO			p_mgnt_info = &adapter->MgntInfo;
	u32				iot_peer = p_mgnt_info->iot_peer;

	if (p_dm_odm->is_bt_disable_edca_turbo) {
		ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("EdcaTurboDisable for BT!!\n"));
		return true;
	}

	if ((!(p_dm_odm->support_ability & ODM_MAC_EDCA_TURBO)) ||
	    (p_dm_odm->wifi_test & RT_WIFI_LOGO) ||
	    (iot_peer >= HT_IOT_PEER_MAX)) {
		ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("EdcaTurboDisable\n"));
		return true;
	}


	/* 1. We do not turn on EDCA turbo mode for some AP that has IOT issue */
	/* 2. User may disable EDCA Turbo mode with OID settings. */
	if (p_mgnt_info->iot_action & HT_IOT_ACT_DISABLE_EDCA_TURBO) {
		ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("iot_action:EdcaTurboDisable\n"));
		return	true;
	}

	return	false;


}
开发者ID:MingxuZhang，项目名称:rtl8821cu，代码行数:35，代码来源:phydm_edcaturbocheck.c


示例3: ODM_UpdateRxIdleAnt_88E

void ODM_UpdateRxIdleAnt_88E(struct odm_dm_struct *dm_odm, u8 Ant)
{
	struct fast_ant_train *dm_fat_tbl = &dm_odm->DM_FatTable;
	struct adapter *adapter = dm_odm->Adapter;
	u32	DefaultAnt, OptionalAnt;

	if (dm_fat_tbl->RxIdleAnt != Ant) {
		ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("Need to Update Rx Idle Ant\n"));
		if (Ant == MAIN_ANT) {
			DefaultAnt = (dm_odm->AntDivType == CG_TRX_HW_ANTDIV) ? MAIN_ANT_CG_TRX : MAIN_ANT_CGCS_RX;
			OptionalAnt = (dm_odm->AntDivType == CG_TRX_HW_ANTDIV) ? AUX_ANT_CG_TRX : AUX_ANT_CGCS_RX;
		} else {
			DefaultAnt = (dm_odm->AntDivType == CG_TRX_HW_ANTDIV) ? AUX_ANT_CG_TRX : AUX_ANT_CGCS_RX;
			OptionalAnt = (dm_odm->AntDivType == CG_TRX_HW_ANTDIV) ? MAIN_ANT_CG_TRX : MAIN_ANT_CGCS_RX;
		}

		if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV) {
			PHY_SetBBReg(adapter, ODM_REG_RX_ANT_CTRL_11N, BIT5|BIT4|BIT3, DefaultAnt);	/* Default RX */
			PHY_SetBBReg(adapter, ODM_REG_RX_ANT_CTRL_11N, BIT8|BIT7|BIT6, OptionalAnt);		/* Optional RX */
			PHY_SetBBReg(adapter, ODM_REG_ANTSEL_CTRL_11N, BIT14|BIT13|BIT12, DefaultAnt);	/* Default TX */
			PHY_SetBBReg(adapter, ODM_REG_RESP_TX_11N, BIT6|BIT7, DefaultAnt);	/* Resp Tx */
		} else if (dm_odm->AntDivType == CGCS_RX_HW_ANTDIV) {
			PHY_SetBBReg(adapter, ODM_REG_RX_ANT_CTRL_11N, BIT5|BIT4|BIT3, DefaultAnt);	/* Default RX */
			PHY_SetBBReg(adapter, ODM_REG_RX_ANT_CTRL_11N, BIT8|BIT7|BIT6, OptionalAnt);		/* Optional RX */
		}
	}
	dm_fat_tbl->RxIdleAnt = Ant;
	ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("RxIdleAnt=%s\n", (Ant == MAIN_ANT) ? "MAIN_ANT" : "AUX_ANT"));
	pr_info("RxIdleAnt=%s\n", (Ant == MAIN_ANT) ? "MAIN_ANT" : "AUX_ANT");
}
开发者ID:7799，项目名称:linux，代码行数:30，代码来源:odm_RTL8188E.c


示例4: odm_HWAntDiv

static void odm_HWAntDiv(struct odm_dm_struct *dm_odm)
{
	u32	i, MinRSSI = 0xFF, AntDivMaxRSSI = 0, MaxRSSI = 0, LocalMinRSSI, LocalMaxRSSI;
	u32	Main_RSSI, Aux_RSSI;
	u8	RxIdleAnt = 0, TargetAnt = 7;
	struct fast_ant_train *dm_fat_tbl = &dm_odm->DM_FatTable;
	struct rtw_dig *pDM_DigTable = &dm_odm->DM_DigTable;
	struct sta_info *pEntry;

	for (i = 0; i < ODM_ASSOCIATE_ENTRY_NUM; i++) {
		pEntry = dm_odm->pODM_StaInfo[i];
		if (IS_STA_VALID(pEntry)) {
			/* 2 Caculate RSSI per Antenna */
			Main_RSSI = (dm_fat_tbl->MainAnt_Cnt[i] != 0) ? (dm_fat_tbl->MainAnt_Sum[i]/dm_fat_tbl->MainAnt_Cnt[i]) : 0;
			Aux_RSSI = (dm_fat_tbl->AuxAnt_Cnt[i] != 0) ? (dm_fat_tbl->AuxAnt_Sum[i]/dm_fat_tbl->AuxAnt_Cnt[i]) : 0;
			TargetAnt = (Main_RSSI >= Aux_RSSI) ? MAIN_ANT : AUX_ANT;
			ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD,
				     ("MacID=%d, MainAnt_Sum=%d, MainAnt_Cnt=%d\n",
				     i, dm_fat_tbl->MainAnt_Sum[i],
				     dm_fat_tbl->MainAnt_Cnt[i]));
			ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD,
				     ("MacID=%d, AuxAnt_Sum=%d, AuxAnt_Cnt=%d\n",
				     i, dm_fat_tbl->AuxAnt_Sum[i], dm_fat_tbl->AuxAnt_Cnt[i]));
			ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD,
				     ("MacID=%d, Main_RSSI= %d, Aux_RSSI= %d\n",
				     i, Main_RSSI, Aux_RSSI));
			/* 2 Select MaxRSSI for DIG */
			LocalMaxRSSI = (Main_RSSI > Aux_RSSI) ? Main_RSSI : Aux_RSSI;
			if ((LocalMaxRSSI > AntDivMaxRSSI) && (LocalMaxRSSI < 40))
				AntDivMaxRSSI = LocalMaxRSSI;
			if (LocalMaxRSSI > MaxRSSI)
				MaxRSSI = LocalMaxRSSI;

			/* 2 Select RX Idle Antenna */
			if ((dm_fat_tbl->RxIdleAnt == MAIN_ANT) && (Main_RSSI == 0))
				Main_RSSI = Aux_RSSI;
			else if ((dm_fat_tbl->RxIdleAnt == AUX_ANT) && (Aux_RSSI == 0))
				Aux_RSSI = Main_RSSI;

			LocalMinRSSI = (Main_RSSI > Aux_RSSI) ? Aux_RSSI : Main_RSSI;
			if (LocalMinRSSI < MinRSSI) {
				MinRSSI = LocalMinRSSI;
				RxIdleAnt = TargetAnt;
			}
			/* 2 Select TRX Antenna */
			if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV)
				odm_UpdateTxAnt_88E(dm_odm, TargetAnt, i);
		}
		dm_fat_tbl->MainAnt_Sum[i] = 0;
		dm_fat_tbl->AuxAnt_Sum[i] = 0;
		dm_fat_tbl->MainAnt_Cnt[i] = 0;
		dm_fat_tbl->AuxAnt_Cnt[i] = 0;
	}

	/* 2 Set RX Idle Antenna */
	ODM_UpdateRxIdleAnt_88E(dm_odm, RxIdleAnt);

	pDM_DigTable->AntDiv_RSSI_max = AntDivMaxRSSI;
	pDM_DigTable->RSSI_max = MaxRSSI;
}
开发者ID:7799，项目名称:linux，代码行数:60，代码来源:odm_RTL8188E.c


示例5: ODM_CfoTrackingReset

VOID
ODM_CfoTrackingReset(
	IN		PVOID					pDM_VOID
)
{
	PDM_ODM_T					pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PCFO_TRACKING				pCfoTrack = (PCFO_TRACKING)PhyDM_Get_Structure( pDM_Odm, PHYDM_CFOTRACK);

	pCfoTrack->DefXCap = odm_GetDefaultCrytaltalCap(pDM_Odm);
	pCfoTrack->bAdjust = TRUE;

	if(pCfoTrack->CrystalCap > pCfoTrack->DefXCap)
	{
		odm_SetCrystalCap(pDM_Odm, pCfoTrack->CrystalCap - 1);
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD,
			("ODM_CfoTrackingReset(): approch default value (0x%x)\n", pCfoTrack->CrystalCap));
	} else if (pCfoTrack->CrystalCap < pCfoTrack->DefXCap)
	{
		odm_SetCrystalCap(pDM_Odm, pCfoTrack->CrystalCap + 1);
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD,
			("ODM_CfoTrackingReset(): approch default value (0x%x)\n", pCfoTrack->CrystalCap));
	}

	#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
	odm_SetATCStatus(pDM_Odm, TRUE);
	#endif
}
开发者ID:AOSC-Dev，项目名称:aosc-os-armel-sunxi-boot，代码行数:27，代码来源:phydm_cfotracking.c


示例6: odm_RefreshRateAdaptiveMask

/*-----------------------------------------------------------------------------
 * Function:	odm_RefreshRateAdaptiveMask()
 *
 * Overview:	Update rate table mask according to rssi
 *
 * Input:		NONE
 *
 * Output:		NONE
 *
 * Return:		NONE
 *
 * Revised History:
 *	When		Who		Remark
 *	05/27/2009	hpfan	Create Version 0.
 *
 *---------------------------------------------------------------------------*/
VOID
odm_RefreshRateAdaptiveMask(
	IN	PVOID	pDM_VOID
	)
{
	PDM_ODM_T		pDM_Odm = (PDM_ODM_T)pDM_VOID;
	ODM_RT_TRACE(pDM_Odm, ODM_COMP_RA_MASK, ODM_DBG_TRACE, ("odm_RefreshRateAdaptiveMask()---------->\n"));
	if (!(pDM_Odm->SupportAbility & ODM_BB_RA_MASK))
	{
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_RA_MASK, ODM_DBG_TRACE, ("odm_RefreshRateAdaptiveMask(): Return cos not supported\n"));
		return;
	}
	//
	// 2011/09/29 MH In HW integration first stage, we provide 4 different handle to operate
	// at the same time. In the stage2/3, we need to prive universal interface and merge all
	// HW dynamic mechanism.
	//
	switch	(pDM_Odm->SupportPlatform)
	{
		case	ODM_WIN:
			odm_RefreshRateAdaptiveMaskMP(pDM_Odm);
			break;

		case	ODM_CE:
			odm_RefreshRateAdaptiveMaskCE(pDM_Odm);
			break;

		case	ODM_AP:
		case	ODM_ADSL:
			odm_RefreshRateAdaptiveMaskAPADSL(pDM_Odm);
			break;
	}

}
开发者ID:dosgo，项目名称:rtl8723bu，代码行数:50，代码来源:odm_RaInfo.c


示例7: odm_edca_turbo_check

void odm_edca_turbo_check(void *dm_void)
{
	/* For AP/ADSL use struct rtl8192cd_priv* */
	/* For CE/NIC use struct void* */

	/* 2011/09/29 MH In HW integration first stage, we provide 4 different
	 * handle to operate at the same time.
	 * In the stage2/3, we need to prive universal interface and merge all
	 * HW dynamic mechanism.
	 */
	struct phy_dm_struct *dm = (struct phy_dm_struct *)dm_void;

	ODM_RT_TRACE(dm, ODM_COMP_EDCA_TURBO,
		     "%s========================>\n", __func__);

	if (!(dm->support_ability & ODM_MAC_EDCA_TURBO))
		return;

	switch (dm->support_platform) {
	case ODM_WIN:

		break;

	case ODM_CE:
		odm_edca_turbo_check_ce(dm);
		break;
	}
	ODM_RT_TRACE(dm, ODM_COMP_EDCA_TURBO,
		     "<========================%s\n", __func__);

} /* odm_CheckEdcaTurbo */
开发者ID:Lyude，项目名称:linux，代码行数:31，代码来源:phydm_edcaturbocheck.c


示例8: ODM_AntennaDiversityInit_88E

VOID
ODM_AntennaDiversityInit_88E(
	IN		PDM_ODM_T		pDM_Odm
)
{
/*
	//2012.03.27 LukeLee: For temp use, should be removed later
	//pDM_Odm->AntDivType = CG_TRX_HW_ANTDIV;
	//{
		PADAPTER		Adapter = pDM_Odm->Adapter;
		HAL_DATA_TYPE*	pHalData = GET_HAL_DATA(Adapter);
		//pHalData->AntDivCfg = 1;
	//}
*/
	if(pDM_Odm->SupportICType != ODM_RTL8188E)
		return;

	//ODM_RT_TRACE(pDM_Odm,ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("pDM_Odm->AntDivType=%d, pHalData->AntDivCfg=%d\n",
	//	pDM_Odm->AntDivType, pHalData->AntDivCfg));
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("pDM_Odm->AntDivType=%d\n",pDM_Odm->AntDivType));
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("pDM_Odm->bIsMPChip=%s\n",(pDM_Odm->bIsMPChip?"TRUE":"FALSE")));

	if(pDM_Odm->AntDivType == CGCS_RX_HW_ANTDIV)
		odm_RX_HWAntDivInit(pDM_Odm);
	else if(pDM_Odm->AntDivType == CG_TRX_HW_ANTDIV)
		odm_TRX_HWAntDivInit(pDM_Odm);
	else if(pDM_Odm->AntDivType == CG_TRX_SMART_ANTDIV)
		odm_FastAntTrainingInit(pDM_Odm);
}
开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:29，代码来源:odm_RTL8188E.c


示例9: odm_edca_choose_traffic_idx

void
odm_edca_choose_traffic_idx(
	void		*p_dm_void,
	u64			cur_tx_bytes,
	u64			cur_rx_bytes,
	boolean		is_bias_on_rx,
	boolean		*p_is_cur_rdl_state
)
{
	struct PHY_DM_STRUCT		*p_dm_odm = (struct PHY_DM_STRUCT *)p_dm_void;

	if (is_bias_on_rx) {

		if (cur_tx_bytes > (cur_rx_bytes * 4)) {
			*p_is_cur_rdl_state = false;
			ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("Uplink Traffic\n "));

		} else {
			*p_is_cur_rdl_state = true;
			ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("Balance Traffic\n"));

		}
	} else {
		if (cur_rx_bytes > (cur_tx_bytes * 4)) {
			*p_is_cur_rdl_state = true;
			ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("Downlink	Traffic\n"));

		} else {
			*p_is_cur_rdl_state = false;
			ODM_RT_TRACE(p_dm_odm, ODM_COMP_EDCA_TURBO, ODM_DBG_LOUD, ("Balance Traffic\n"));
		}
	}

	return ;
}
开发者ID:MingxuZhang，项目名称:rtl8821cu，代码行数:35，代码来源:phydm_edcaturbocheck.c


示例10: odm_SetCrystalCap

VOID
odm_SetCrystalCap(
	IN		PVOID					pDM_VOID,
	IN		u1Byte					CrystalCap
)
{
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
	PDM_ODM_T					pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PCFO_TRACKING				pCfoTrack = (PCFO_TRACKING)PhyDM_Get_Structure( pDM_Odm, PHYDM_CFOTRACK);
	BOOLEAN 					bEEPROMCheck;
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
	PADAPTER					Adapter = pDM_Odm->Adapter;
	HAL_DATA_TYPE				*pHalData = GET_HAL_DATA(Adapter);

	bEEPROMCheck = (pHalData->EEPROMVersion >= 0x01)?TRUE:FALSE;
#else
	bEEPROMCheck = TRUE;
#endif

	if(pCfoTrack->CrystalCap == CrystalCap)
		return;

	pCfoTrack->CrystalCap = CrystalCap;

	if (pDM_Odm->SupportICType & (ODM_RTL8188E | ODM_RTL8188F)) {
		/* write 0x24[22:17] = 0x24[16:11] = CrystalCap */
		CrystalCap = CrystalCap & 0x3F;
		ODM_SetBBReg(pDM_Odm, REG_AFE_XTAL_CTRL, 0x007ff800, (CrystalCap|(CrystalCap << 6)));
	} else if (pDM_Odm->SupportICType & ODM_RTL8812) {
		/* write 0x2C[30:25] = 0x2C[24:19] = CrystalCap */
		CrystalCap = CrystalCap & 0x3F;
		ODM_SetBBReg(pDM_Odm, REG_MAC_PHY_CTRL, 0x7FF80000, (CrystalCap|(CrystalCap << 6)));
	} else if (((pDM_Odm->SupportICType & ODM_RTL8723A) && bEEPROMCheck) ||
		(pDM_Odm->SupportICType & (ODM_RTL8703B|ODM_RTL8723B|ODM_RTL8192E|ODM_RTL8821))) {
		/* 0x2C[23:18] = 0x2C[17:12] = CrystalCap */
		CrystalCap = CrystalCap & 0x3F;
		ODM_SetBBReg(pDM_Odm, REG_MAC_PHY_CTRL, 0x00FFF000, (CrystalCap|(CrystalCap << 6)));	
	} else if (pDM_Odm->SupportICType & ODM_RTL8821B) {
		/* write 0x28[6:1] = 0x24[30:25] = CrystalCap */
		CrystalCap = CrystalCap & 0x3F;
		ODM_SetBBReg(pDM_Odm, REG_AFE_XTAL_CTRL, 0x7E000000, CrystalCap);
		ODM_SetBBReg(pDM_Odm, REG_AFE_PLL_CTRL, 0x7E, CrystalCap);
	} else if (pDM_Odm->SupportICType & ODM_RTL8814A) {
		/* write 0x2C[26:21] = 0x2C[20:15] = CrystalCap */
		CrystalCap = CrystalCap & 0x3F;
		ODM_SetBBReg(pDM_Odm, REG_MAC_PHY_CTRL, 0x07FF8000, (CrystalCap|(CrystalCap << 6)));
	} else if (pDM_Odm->SupportICType & ODM_RTL8822B) {
		/* write 0x24[30:25] = 0x28[6:1] = CrystalCap */
		CrystalCap = CrystalCap & 0x3F;
		ODM_SetBBReg(pDM_Odm, REG_AFE_XTAL_CTRL, 0x7e000000, CrystalCap);
		ODM_SetBBReg(pDM_Odm, REG_AFE_PLL_CTRL, 0x7e, CrystalCap);
	} else {
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD, ("odm_SetCrystalCap(): Use default setting.\n"));
		ODM_SetBBReg(pDM_Odm, REG_MAC_PHY_CTRL, 0xFFF000, (CrystalCap|(CrystalCap << 6)));
	}

	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD, ("odm_SetCrystalCap(): CrystalCap = 0x%x\n", CrystalCap));
#endif
}
开发者ID:AOSC-Dev，项目名称:aosc-os-armel-sunxi-boot，代码行数:59，代码来源:phydm_cfotracking.c


示例11: _LOK_One_Shot

VOID
_LOK_One_Shot(
	IN	PVOID		pDM_VOID
)
{	
	PDM_ODM_T	pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PIQK_INFO	pIQK_info = &pDM_Odm->IQK_info;
	u1Byte		Path = 0, delay_count = 0, ii;
	BOOLEAN		LOK_notready = FALSE;
	u4Byte		LOK_temp1 = 0, LOK_temp2 = 0;

	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("============ LOK ============\n"));
	for(Path =0; Path <=3; Path++){
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_TRACE, 
			("==========S%d LOK ==========\n", Path));
		
		ODM_SetBBReg(pDM_Odm, 0x9a4, BIT(21)|BIT(20), Path);	 // ADC Clock source
		ODM_Write4Byte(pDM_Odm, 0x1b00, (0xf8000001|(1<<(4+Path))));	// LOK: CMD ID = 0  {0xf8000011, 0xf8000021, 0xf8000041, 0xf8000081}
		ODM_delay_ms(LOK_delay);
		delay_count = 0;
		LOK_notready = TRUE;
		
		while(LOK_notready){
			LOK_notready = (BOOLEAN) ODM_GetBBReg(pDM_Odm, 0x1b00, BIT(0));
			ODM_delay_ms(1);
			delay_count++;
			if(delay_count >= 10){
				ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, 
					("S%d LOK timeout!!!\n", Path));
				
				_IQK_ResetNCTL_8814A(pDM_Odm);
				break;
			}
		}
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_TRACE, 
			("S%d ==> delay_count = 0x%d\n", Path, delay_count));
		
		if(!LOK_notready){
			ODM_Write4Byte(pDM_Odm, 0x1b00, 0xf8000000|(Path<<1));
			ODM_Write4Byte(pDM_Odm, 0x1bd4, 0x003f0001);
			LOK_temp2 = (ODM_GetBBReg(pDM_Odm, 0x1bfc, 0x003e0000)+0x10)&0x1f;
			LOK_temp1 = (ODM_GetBBReg(pDM_Odm, 0x1bfc, 0x0000003e)+0x10)&0x1f;
			
			for(ii = 1; ii<5; ii++){
				LOK_temp1 = LOK_temp1 + ((LOK_temp1 & BIT(4-ii))<<(ii*2));
				LOK_temp2 = LOK_temp2 + ((LOK_temp2 & BIT(4-ii))<<(ii*2));
			}
			ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_TRACE, 
				("LOK_temp1 = 0x%x, LOK_temp2 = 0x%x\n", LOK_temp1>>4, LOK_temp2>>4));
			
			ODM_SetRFReg(pDM_Odm, (ODM_RF_RADIO_PATH_E)Path, 0x8, 0x07c00, LOK_temp1>>4);
			ODM_SetRFReg(pDM_Odm, (ODM_RF_RADIO_PATH_E)Path, 0x8, 0xf8000, LOK_temp2>>4);
			
			ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_TRACE, 
				("==>S%d fill LOK\n", Path));

		}
		else{
开发者ID:LXiong，项目名称:openwrt-rtk，代码行数:58，代码来源:phydm_iqk_8814a.c


示例12: ODM_AntennaDiversityInit_88E

void ODM_AntennaDiversityInit_88E(struct odm_dm_struct *dm_odm)
{
	ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("dm_odm->AntDivType=%d\n", dm_odm->AntDivType));
	ODM_RT_TRACE(dm_odm, ODM_COMP_ANT_DIV, ODM_DBG_LOUD, ("dm_odm->bIsMPChip=%s\n", (dm_odm->bIsMPChip ? "true" : "false")));

	if (dm_odm->AntDivType == CGCS_RX_HW_ANTDIV)
		odm_RX_HWAntDivInit(dm_odm);
	else if (dm_odm->AntDivType == CG_TRX_HW_ANTDIV)
		odm_TRX_HWAntDivInit(dm_odm);
	else if (dm_odm->AntDivType == CG_TRX_SMART_ANTDIV)
		odm_FastAntTrainingInit(dm_odm);
}
开发者ID:7799，项目名称:linux，代码行数:12，代码来源:odm_RTL8188E.c


示例13: ODM_CfoTrackingInit

VOID
ODM_CfoTrackingInit(
	IN		PVOID					pDM_VOID
)
{
	PDM_ODM_T					pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PCFO_TRACKING				pCfoTrack = (PCFO_TRACKING)PhyDM_Get_Structure( pDM_Odm, PHYDM_CFOTRACK);

	pCfoTrack->DefXCap = pCfoTrack->CrystalCap = odm_GetDefaultCrytaltalCap(pDM_Odm);
	pCfoTrack->bATCStatus = odm_GetATCStatus(pDM_Odm);
	pCfoTrack->bAdjust = TRUE;
	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD, ("ODM_CfoTracking_init()=========> \n"));
	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD, ("ODM_CfoTracking_init(): bATCStatus = %d, CrystalCap = 0x%x \n",pCfoTrack->bATCStatus, pCfoTrack->DefXCap));
}
开发者ID:AOSC-Dev，项目名称:aosc-os-armel-sunxi-boot，代码行数:14，代码来源:phydm_cfotracking.c


示例14: ODM_CfoTrackingInit

void
ODM_CfoTrackingInit(
	IN		void *					pDM_VOID
)
{
	PDM_ODM_T					pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PCFO_TRACKING				pCfoTrack = &pDM_Odm->DM_CfoTrack;

	pCfoTrack->DefXCap = pCfoTrack->CrystalCap = odm_GetDefaultCrytaltalCap(pDM_Odm);
	pCfoTrack->bATCStatus = odm_GetATCStatus(pDM_Odm);
	pCfoTrack->bAdjust = true;
	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD, ("ODM_CfoTracking_init()=========> \n"));
	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CFO_TRACKING, ODM_DBG_LOUD, ("ODM_CfoTracking_init(): bATCStatus = %d, CrystalCap = 0x%x \n",pCfoTrack->bATCStatus, pCfoTrack->DefXCap));
}
开发者ID:tsj123，项目名称:androidx86_remix，代码行数:14，代码来源:odm_CfoTracking.c


示例15: HalTxbf8814A_Status

VOID
HalTxbf8814A_Status(
	IN PVOID			pDM_VOID,
	IN u1Byte				Idx
)
{
	PDM_ODM_T	pDM_Odm = (PDM_ODM_T)pDM_VOID;
	u2Byte					BeamCtrlVal, tmpVal;
	u4Byte					BeamCtrlReg;
	PRT_BEAMFORMING_INFO	pBeamformingInfo = &pDM_Odm->BeamformingInfo;
	RT_BEAMFORMEE_ENTRY	BeamformEntry;

	if (Idx < BEAMFORMEE_ENTRY_NUM)
		BeamformEntry = pBeamformingInfo->BeamformeeEntry[Idx];
	else
		return;

	if (phydm_actingDetermine(pDM_Odm, PhyDM_ACTING_AS_IBSS))
		BeamCtrlVal = BeamformEntry.MacId;
	else
		BeamCtrlVal = BeamformEntry.P_AID;

	ODM_RT_TRACE(pDM_Odm, PHYDM_COMP_TXBF, ODM_DBG_LOUD, ("@%s, BeamformEntry.BeamformEntryState = %d", __func__, BeamformEntry.BeamformEntryState));

	if (Idx == 0)
		BeamCtrlReg = REG_TXBF_CTRL_8814A;
	else {
		BeamCtrlReg = REG_TXBF_CTRL_8814A + 2;
		BeamCtrlVal |= BIT12 | BIT14 | BIT15;
	}

	if (BeamformEntry.BeamformEntryState == BEAMFORMING_ENTRY_STATE_PROGRESSED) {
		if (BeamformEntry.SoundBW == CHANNEL_WIDTH_20)
			BeamCtrlVal |= BIT9;
		else if (BeamformEntry.SoundBW == CHANNEL_WIDTH_40)
			BeamCtrlVal |= (BIT9 | BIT10);
		else if (BeamformEntry.SoundBW == CHANNEL_WIDTH_80)
			BeamCtrlVal |= (BIT9 | BIT10 | BIT11);
	} else {
		ODM_RT_TRACE(pDM_Odm, PHYDM_COMP_TXBF, ODM_DBG_LOUD, ("@%s, Don't apply Vmatrix",  __func__));
		BeamCtrlVal &= ~(BIT9 | BIT10 | BIT11);
	}

	ODM_Write2Byte(pDM_Odm, BeamCtrlReg, BeamCtrlVal);
	/*disable NDP packet use beamforming */
	tmpVal = ODM_Read2Byte(pDM_Odm, REG_TXBF_CTRL_8814A);
	ODM_Write2Byte(pDM_Odm, REG_TXBF_CTRL_8814A, tmpVal | BIT15);

}
开发者ID:ConiKost，项目名称:rtl88XXAU，代码行数:49，代码来源:haltxbf8814a.c


示例16: odm_ConfigBB_PHY_REG_PG_8188E

void
odm_ConfigBB_PHY_REG_PG_8188E(
		PDM_ODM_T	pDM_Odm,
    	u4Byte		Addr,
    	u4Byte		Bitmask,
    	u4Byte		Data
    )
{
	if (Addr == 0xfe){
		ODM_sleep_ms(50);
	}
	else if (Addr == 0xfd){
		ODM_delay_ms(5);
	}
	else if (Addr == 0xfc){
		ODM_delay_ms(1);
	}
	else if (Addr == 0xfb){
		ODM_delay_us(50);
	}
	else if (Addr == 0xfa){
		ODM_delay_us(5);
	}
	else if (Addr == 0xf9){
		ODM_delay_us(1);
	}
	else{
		ODM_RT_TRACE(pDM_Odm,ODM_COMP_INIT, ODM_DBG_LOUD, ("===> @@@@@@@ ODM_ConfigBBWithHeaderFile: [PHY_REG] %08X %08X %08X\n", Addr, Bitmask, Data));
		storePwrIndexDiffRateOffset(pDM_Odm->Adapter, Addr, Bitmask, Data);
	}
}
开发者ID:morphis，项目名称:rtl8188eu，代码行数:31，代码来源:odm_RegConfig8188E.c


示例17: odm_ConfigBB_PHY_8188E

void odm_ConfigBB_PHY_8188E(struct odm_dm_struct *pDM_Odm, u32 Addr, u32 Bitmask, u32 Data)
{
	if (Addr == 0xfe) {
		ODM_sleep_ms(50);
	} else if (Addr == 0xfd) {
		ODM_delay_ms(5);
	} else if (Addr == 0xfc) {
		ODM_delay_ms(1);
	} else if (Addr == 0xfb) {
		ODM_delay_us(50);
	} else if (Addr == 0xfa) {
		ODM_delay_us(5);
	} else if (Addr == 0xf9) {
		ODM_delay_us(1);
	} else {
		if (Addr == 0xa24)
			pDM_Odm->RFCalibrateInfo.RegA24 = Data;
		ODM_SetBBReg(pDM_Odm, Addr, Bitmask, Data);

		/*  Add 1us delay between BB/RF register setting. */
		ODM_delay_us(1);
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_TRACE,
			     ("===> ODM_ConfigBBWithHeaderFile: [PHY_REG] %08X %08X\n",
			     Addr, Data));
	}
}
开发者ID:09sea98，项目名称:rtl8188eu，代码行数:26，代码来源:odm_RegConfig8188E.c


示例18: halComTxbf_RateWorkItemCallback

VOID
halComTxbf_RateWorkItemCallback(	
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	IN	PADAPTER		Adapter
#else
	IN PVOID			pDM_VOID
#endif
	)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	PDM_ODM_T		pDM_Odm = &pHalData->DM_OutSrc;
#else
	PDM_ODM_T	pDM_Odm = (PDM_ODM_T)pDM_VOID;
#endif
	PHAL_TXBF_INFO	pTxbfInfo = &pDM_Odm->BeamformingInfo.TxbfInfo;
	u1Byte			BW = pTxbfInfo->BW;
	u1Byte			Rate = pTxbfInfo->Rate;	
	
	ODM_RT_TRACE(pDM_Odm, PHYDM_COMP_TXBF, ODM_DBG_LOUD, ("[%s] Start!\n", __func__));

	if (pDM_Odm->SupportICType & ODM_RTL8812)
		HalTxbf8812A_setNDPArate(pDM_Odm, BW, Rate);
	else if (pDM_Odm->SupportICType & ODM_RTL8192E)
		HalTxbf8192E_setNDPArate(pDM_Odm, BW, Rate);
	else if (pDM_Odm->SupportICType & ODM_RTL8814A)
		HalTxbf8814A_setNDPArate(pDM_Odm, BW, Rate);
	
}
开发者ID:ConiKost，项目名称:rtl88XXAU，代码行数:29，代码来源:halcomtxbf.c


示例19: Phydm_DynamicEDCCA

//
// Description: According to initial gain value to determine to enable or disable EDCCA.
//
// Suggested by SD3 Wilson. Added by tynli. 2011.11.25.
//
VOID
Phydm_DynamicEDCCA(
	IN		PVOID					pDM_VOID
)
{
	PDM_ODM_T		pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PADAPTER		pAdapter	= pDM_Odm->Adapter;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
	u1Byte			RegC50, RegC58;
	BOOLEAN			bEDCCAenable = FALSE;
	
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
	BOOLEAN			bFwCurrentInPSMode=FALSE;	

	pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_FW_PSMODE_STATUS, (pu1Byte)(&bFwCurrentInPSMode));	

	// Disable EDCCA mode while under LPS mode, added by Roger, 2012.09.14.
	if(bFwCurrentInPSMode)
		return;
#endif
	//
	// 2013/11/14 Ken According to BB team Jame's suggestion, we need to disable soft AP mode EDCCA.
	// 2014/01/08 MH For Miracst AP mode test. We need to disable EDCCA. Otherwise, we may stop
	// to send beacon in noisy environment or platform.
	//
	if(ACTING_AS_AP(pAdapter) || ACTING_AS_AP(GetFirstAPAdapter(pAdapter)))
	//if(ACTING_AS_AP(pAdapter))
	{
		ODM_RT_TRACE(pDM_Odm,PHYDM_COMP_ADAPTIVITY, ODM_DBG_LOUD, ("At least One Port as AP disable EDCCA\n"));
		Phydm_DisableEDCCA(pDM_Odm);
		if(pHalData->bPreEdccaEnable)
			Phydm_DisableEDCCA(pDM_Odm);
		pHalData->bPreEdccaEnable = FALSE;
		return;
	}
	
	RegC50 = (u1Byte)ODM_GetBBReg(pDM_Odm, rOFDM0_XAAGCCore1, bMaskByte0);
	RegC58 = (u1Byte)ODM_GetBBReg(pDM_Odm, rOFDM0_XBAGCCore1, bMaskByte0);


 	if((RegC50 > 0x28 && RegC58 > 0x28) ||
  		((pDM_Odm->SupportICType == ODM_RTL8723A && IS_WIRELESS_MODE_G(pAdapter) && RegC50>0x26)) ||
  		(pDM_Odm->SupportICType == ODM_RTL8188E && RegC50 > 0x28))
	{
		if(!pHalData->bPreEdccaEnable)
		{
			Phydm_EnableEDCCA(pDM_Odm);
			pHalData->bPreEdccaEnable = TRUE;
		}
		
	}
	else if((RegC50 < 0x25 && RegC58 < 0x25) || (pDM_Odm->SupportICType == ODM_RTL8188E && RegC50 < 0x25))
	{
		if(pHalData->bPreEdccaEnable)
		{
			Phydm_DisableEDCCA(pDM_Odm);
			pHalData->bPreEdccaEnable = FALSE;
		}
	}
}
开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:65，代码来源:PhyDM_Adaptivity.c


示例20: ODM_ReleaseTimer

VOID
ODM_ReleaseTimer(
	IN 	PDM_ODM_T		pDM_Odm,
	IN	PRT_TIMER		pTimer
	)
{
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))

#elif(DM_ODM_SUPPORT_TYPE & ODM_CE)

#elif(DM_ODM_SUPPORT_TYPE & ODM_WIN)

	PADAPTER Adapter = pDM_Odm->Adapter;

    // <20120301, Kordan> If the initilization fails, InitializeAdapterXxx will return regardless of InitHalDm. 
    // Hence, uninitialized timers cause BSOD when the driver releases resources since the init fail.
    if (pTimer == 0) 
    {
        ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_SERIOUS, ("=====>ODM_ReleaseTimer(), The timer is NULL! Please check it!\n"));
        return;
    }
        
	PlatformReleaseTimer(Adapter, pTimer);
#endif
}
开发者ID:Carlstark，项目名称:RaspberryPi2，代码行数:25，代码来源:phydm_interface.c



注：本文中的ODM_RT_TRACE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ ODS函数代码示例发布时间：2022-05-30
下一篇：
C++ ODD函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap