C++ NV_DEBUG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NV_DEBUG函数的典型用法代码示例。如果您正苦于以下问题：C++ NV_DEBUG函数的具体用法？C++ NV_DEBUG怎么用？C++ NV_DEBUG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NV_DEBUG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: nv50_dac_detect

static enum drm_connector_status
nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
{
	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
	struct drm_device *dev = encoder->dev;
	struct drm_nouveau_private *dev_priv = dev->dev_private;
	enum drm_connector_status status = connector_status_disconnected;
	uint32_t dpms_state, load_pattern, load_state;
	int or = nv_encoder->or;

	nv_wr32(dev, NV50_PDISPLAY_DAC_CLK_CTRL1(or), 0x00000001);
	dpms_state = nv_rd32(dev, NV50_PDISPLAY_DAC_DPMS_CTRL(or));

	nv_wr32(dev, NV50_PDISPLAY_DAC_DPMS_CTRL(or),
		0x00150000 | NV50_PDISPLAY_DAC_DPMS_CTRL_PENDING);
	if (!nv_wait(NV50_PDISPLAY_DAC_DPMS_CTRL(or),
		     NV50_PDISPLAY_DAC_DPMS_CTRL_PENDING, 0)) {
		NV_ERROR(dev, "timeout: DAC_DPMS_CTRL_PENDING(%d) == 0\n", or);
		NV_ERROR(dev, "DAC_DPMS_CTRL(%d) = 0x%08x\n", or,
			  nv_rd32(dev, NV50_PDISPLAY_DAC_DPMS_CTRL(or)));
		return status;
	}

	/* Use bios provided value if possible. */
	if (dev_priv->vbios->dactestval) {
		load_pattern = dev_priv->vbios->dactestval;
		NV_DEBUG(dev, "Using bios provided load_pattern of %d\n",
			  load_pattern);
	} else {
		load_pattern = 340;
		NV_DEBUG(dev, "Using default load_pattern of %d\n",
			 load_pattern);
	}

	nv_wr32(dev, NV50_PDISPLAY_DAC_LOAD_CTRL(or),
		NV50_PDISPLAY_DAC_LOAD_CTRL_ACTIVE | load_pattern);
	mdelay(45); /* give it some time to process */
	load_state = nv_rd32(dev, NV50_PDISPLAY_DAC_LOAD_CTRL(or));

	nv_wr32(dev, NV50_PDISPLAY_DAC_LOAD_CTRL(or), 0);
	nv_wr32(dev, NV50_PDISPLAY_DAC_DPMS_CTRL(or), dpms_state |
		NV50_PDISPLAY_DAC_DPMS_CTRL_PENDING);

	if ((load_state & NV50_PDISPLAY_DAC_LOAD_CTRL_PRESENT) ==
			  NV50_PDISPLAY_DAC_LOAD_CTRL_PRESENT)
		status = connector_status_connected;

	if (status == connector_status_connected)
		NV_DEBUG(dev, "Load was detected on output with or %d\n", or);
	else
		NV_DEBUG(dev, "Load was not detected on output with or %d\n", or);

	return status;
}

开发者ID:Aircell，项目名称:asp-kernel，代码行数:54，代码来源:nv50_dac.c

示例2: nva3_copy_context_new

static int
nva3_copy_context_new(struct nouveau_channel *chan, int engine)
{
	struct drm_device *dev = chan->dev;
	struct drm_nouveau_private *dev_priv = dev->dev_private;
	struct nouveau_gpuobj *ramin = chan->ramin;
	struct nouveau_gpuobj *ctx = NULL;
	int ret;

	NV_DEBUG(dev, "ch%d\n", chan->id);

	ret = nouveau_gpuobj_new(dev, chan, 256, 0, NVOBJ_FLAG_ZERO_ALLOC |
				 NVOBJ_FLAG_ZERO_FREE, &ctx);
	if (ret)
		return ret;

	nv_wo32(ramin, 0xc0, 0x00190000);
	nv_wo32(ramin, 0xc4, ctx->vinst + ctx->size - 1);
	nv_wo32(ramin, 0xc8, ctx->vinst);
	nv_wo32(ramin, 0xcc, 0x00000000);
	nv_wo32(ramin, 0xd0, 0x00000000);
	nv_wo32(ramin, 0xd4, 0x00000000);
	dev_priv->engine.instmem.flush(dev);

	atomic_inc(&chan->vm->engref[engine]);
	chan->engctx[engine] = ctx;
	return 0;
}

开发者ID:ARMWorks，项目名称:FA_2451_Linux_Kernel，代码行数:28，代码来源:nva3_copy.c

示例3: nv50_graph_destroy_context

void
nv50_graph_destroy_context(struct nouveau_channel *chan)
{
	struct drm_device *dev = chan->dev;
	struct drm_nouveau_private *dev_priv = dev->dev_private;
	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
	struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
	int i, hdr = (dev_priv->chipset == 0x50) ? 0x200 : 0x20;
	unsigned long flags;

	NV_DEBUG(dev, "ch%d\n", chan->id);

	if (!chan->ramin)
		return;

	spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
	pfifo->reassign(dev, false);
	pgraph->fifo_access(dev, false);

	if (pgraph->channel(dev) == chan)
		pgraph->unload_context(dev);

	for (i = hdr; i < hdr + 24; i += 4)
		nv_wo32(chan->ramin, i, 0);
	dev_priv->engine.instmem.flush(dev);

	pgraph->fifo_access(dev, true);
	pfifo->reassign(dev, true);
	spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);

	nouveau_gpuobj_ref(NULL, &chan->ramin_grctx);

	atomic_dec(&chan->vm->pgraph_refs);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:34，代码来源:nv50_graph.c

示例4: nv04_tv_dpms

static void nv04_tv_dpms(struct drm_encoder *encoder, int mode)
{
	struct drm_device *dev = encoder->dev;
	struct nouveau_drm *drm = nouveau_drm(dev);
	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
	struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
	uint8_t crtc1A;

	NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
		 mode, nv_encoder->dcb->index);

	state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK);

	if (mode == DRM_MODE_DPMS_ON) {
		int head = nouveau_crtc(encoder->crtc)->index;
		crtc1A = NVReadVgaCrtc(dev, head, NV_CIO_CRE_RPC1_INDEX);

		state->pllsel |= head ? PLLSEL_TV_CRTC2_MASK :
					PLLSEL_TV_CRTC1_MASK;

		/* Inhibit hsync */
		crtc1A |= 0x80;

		NVWriteVgaCrtc(dev, head, NV_CIO_CRE_RPC1_INDEX, crtc1A);
	}

	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_PLL_COEFF_SELECT, state->pllsel);

	get_slave_funcs(encoder)->dpms(encoder, mode);
}

开发者ID:03199618，项目名称:linux，代码行数:30，代码来源:tvnv04.c

示例5: nv50_graph_init_regs__nv

static void
nv50_graph_init_regs__nv(struct drm_device *dev)
{
	struct drm_nouveau_private *dev_priv = dev->dev_private;
	uint32_t units = nv_rd32(dev, 0x1540);
	int i;

	NV_DEBUG(dev, "\n");

	nv_wr32(dev, 0x400804, 0xc0000000);
	nv_wr32(dev, 0x406800, 0xc0000000);
	nv_wr32(dev, 0x400c04, 0xc0000000);
	nv_wr32(dev, 0x401800, 0xc0000000);
	nv_wr32(dev, 0x405018, 0xc0000000);
	nv_wr32(dev, 0x402000, 0xc0000000);

	for (i = 0; i < 16; i++) {
		if (units & 1 << i) {
			if (dev_priv->chipset < 0xa0) {
				nv_wr32(dev, 0x408900 + (i << 12), 0xc0000000);
				nv_wr32(dev, 0x408e08 + (i << 12), 0xc0000000);
				nv_wr32(dev, 0x408314 + (i << 12), 0xc0000000);
			} else {
				nv_wr32(dev, 0x408600 + (i << 11), 0xc0000000);
				nv_wr32(dev, 0x408708 + (i << 11), 0xc0000000);
				nv_wr32(dev, 0x40831c + (i << 11), 0xc0000000);
			}
		}
	}

	nv_wr32(dev, 0x400108, 0xffffffff);

	nv_wr32(dev, 0x400824, 0x00004000);
	nv_wr32(dev, 0x400500, 0x00010001);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:35，代码来源:nv50_graph.c

示例6: nv50_cursor_hide

static void
nv50_cursor_hide(struct nouveau_crtc *nv_crtc, bool update)
{
	struct drm_device *dev = nv_crtc->base.dev;
	struct nouveau_drm *drm = nouveau_drm(dev);
	struct nouveau_channel *evo = nv50_display(dev)->master;
	int ret;

	NV_DEBUG(drm, "\n");

	if (update && !nv_crtc->cursor.visible)
		return;

	ret = RING_SPACE(evo, (nv_device(drm->device)->chipset != 0x50 ? 5 : 3) + update * 2);
	if (ret) {
		NV_ERROR(drm, "no space while hiding cursor\n");
		return;
	}
	BEGIN_NV04(evo, 0, NV50_EVO_CRTC(nv_crtc->index, CURSOR_CTRL), 2);
	OUT_RING(evo, NV50_EVO_CRTC_CURSOR_CTRL_HIDE);
	OUT_RING(evo, 0);
	if (nv_device(drm->device)->chipset != 0x50) {
		BEGIN_NV04(evo, 0, NV84_EVO_CRTC(nv_crtc->index, CURSOR_DMA), 1);
		OUT_RING(evo, NV84_EVO_CRTC_CURSOR_DMA_HANDLE_NONE);
	}

	if (update) {
		BEGIN_NV04(evo, 0, NV50_EVO_UPDATE, 1);
		OUT_RING(evo, 0);
		FIRE_RING(evo);
		nv_crtc->cursor.visible = false;
	}
}

开发者ID:AllenDou，项目名称:linux，代码行数:33，代码来源:nv50_cursor.c

示例7: nv50_dac_create

int
nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry)
{
	struct nouveau_encoder *nv_encoder;
	struct drm_encoder *encoder;

	NV_DEBUG(dev, "\n");
	NV_INFO(dev, "Detected a DAC output\n");

	nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
	if (!nv_encoder)
		return -ENOMEM;
	encoder = to_drm_encoder(nv_encoder);

	nv_encoder->dcb = entry;
	nv_encoder->or = ffs(entry->or) - 1;

	nv_encoder->disconnect = nv50_dac_disconnect;

	drm_encoder_init(dev, encoder, &nv50_dac_encoder_funcs,
			 DRM_MODE_ENCODER_DAC);
	drm_encoder_helper_add(encoder, &nv50_dac_helper_funcs);

	encoder->possible_crtcs = entry->heads;
	encoder->possible_clones = 0;
	return 0;
}

开发者ID:Aircell，项目名称:asp-kernel，代码行数:27，代码来源:nv50_dac.c

示例8: nva3_pm_clock_get

int
nva3_pm_clock_get(struct drm_device *dev, u32 id)
{
	u32 src0, src1, ctrl, coef;
	struct pll_lims pll;
	int ret, off;
	int P, N, M;

	ret = get_pll_limits(dev, id, &pll);
	if (ret)
		return ret;

	off = nva3_pm_pll_offset(id);
	if (off < 0)
		return off;

	src0 = nv_rd32(dev, 0x4120 + (off * 4));
	src1 = nv_rd32(dev, 0x4160 + (off * 4));
	ctrl = nv_rd32(dev, pll.reg + 0);
	coef = nv_rd32(dev, pll.reg + 4);
	NV_DEBUG(dev, "PLL %02x: 0x%08x 0x%08x 0x%08x 0x%08x\n",
		      id, src0, src1, ctrl, coef);

	if (ctrl & 0x00000008) {
		u32 div = ((src1 & 0x003c0000) >> 18) + 1;
		return (pll.refclk * 2) / div;
	}

开发者ID:1111saeid，项目名称:jb_kernel_3.0.16_htc_golfu，代码行数:27，代码来源:nva3_pm.c

示例9: nv50_graph_takedown

void
nv50_graph_takedown(struct drm_device *dev)
{
	NV_DEBUG(dev, "\n");
	nv_wr32(dev, 0x40013c, 0x00000000);
	nouveau_irq_unregister(dev, 12);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:7，代码来源:nv50_graph.c

示例10: nv50_mpeg_context_new

static int
nv50_mpeg_context_new(struct nouveau_channel *chan, int engine)
{
	struct drm_device *dev = chan->dev;
	struct drm_nouveau_private *dev_priv = dev->dev_private;
	struct nouveau_gpuobj *ramin = chan->ramin;
	struct nouveau_gpuobj *ctx = NULL;
	int ret;

	NV_DEBUG(dev, "ch%d\n", chan->id);

	ret = nouveau_gpuobj_new(dev, chan, 128 * 4, 0, NVOBJ_FLAG_ZERO_ALLOC |
				 NVOBJ_FLAG_ZERO_FREE, &ctx);
	if (ret)
		return ret;

	nv_wo32(ramin, CTX_PTR(dev, 0x00), 0x80190002);
	nv_wo32(ramin, CTX_PTR(dev, 0x04), ctx->vinst + ctx->size - 1);
	nv_wo32(ramin, CTX_PTR(dev, 0x08), ctx->vinst);
	nv_wo32(ramin, CTX_PTR(dev, 0x0c), 0);
	nv_wo32(ramin, CTX_PTR(dev, 0x10), 0);
	nv_wo32(ramin, CTX_PTR(dev, 0x14), 0x00010000);

	nv_wo32(ctx, 0x70, 0x00801ec1);
	nv_wo32(ctx, 0x7c, 0x0000037c);
	dev_priv->engine.instmem.flush(dev);

	chan->engctx[engine] = ctx;
	return 0;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:30，代码来源:nv50_mpeg.c

示例11: nv50_fifo_playlist_update

static void
nv50_fifo_playlist_update(struct drm_device *dev)
{
	struct drm_nouveau_private *dev_priv = dev->dev_private;
	struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
	struct nouveau_gpuobj *cur;
	int i, nr;

	NV_DEBUG(dev, "\n");

	cur = pfifo->playlist[pfifo->cur_playlist];
	pfifo->cur_playlist = !pfifo->cur_playlist;

	/* We never schedule channel 0 or 127 */
	for (i = 1, nr = 0; i < 127; i++) {
		if (dev_priv->channels.ptr[i] &&
		    dev_priv->channels.ptr[i]->ramfc) {
			nv_wo32(cur, (nr * 4), i);
			nr++;
		}
	}
	dev_priv->engine.instmem.flush(dev);

	nv_wr32(dev, 0x32f4, cur->vinst >> 12);
	nv_wr32(dev, 0x32ec, nr);
	nv_wr32(dev, 0x2500, 0x101);
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:27，代码来源:nv50_fifo.c

示例12: nouveau_load

int nouveau_load(struct drm_device *dev, unsigned long flags)
{
	struct drm_nouveau_private *dev_priv;
	uint32_t reg0;
	resource_size_t mmio_start_offs;
	int ret;

	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
	if (!dev_priv) {
		ret = -ENOMEM;
		goto err_out;
	}
	dev->dev_private = dev_priv;
	dev_priv->dev = dev;

	dev_priv->flags = flags & NOUVEAU_FLAGS;

	NV_DEBUG(dev, "vendor: 0x%X device: 0x%X class: 0x%X\n",
		 dev->pci_vendor, dev->pci_device, dev->pdev->class);

	dev_priv->wq = create_workqueue("nouveau");
	if (!dev_priv->wq) {
		ret = -EINVAL;
		goto err_priv;
	}

	/* resource 0 is mmio regs */
	/* resource 1 is linear FB */
	/* resource 2 is RAMIN (mmio regs + 0x1000000) */
	/* resource 6 is bios */

	/* map the mmio regs */
	mmio_start_offs = pci_resource_start(dev->pdev, 0);
	dev_priv->mmio = ioremap(mmio_start_offs, 0x00800000);
	if (!dev_priv->mmio) {
		NV_ERROR(dev, "Unable to initialize the mmio mapping. "
			 "Please report your setup to " DRIVER_EMAIL "\n");
		ret = -EINVAL;
		goto err_wq;
	}
	NV_DEBUG(dev, "regs mapped ok at 0x%llx\n",
					(unsigned long long)mmio_start_offs);

#ifdef __BIG_ENDIAN
	/* Put the card in BE mode if it's not */
	if (nv_rd32(dev, NV03_PMC_BOOT_1))
		nv_wr32(dev, NV03_PMC_BOOT_1, 0x00000001);

	DRM_MEMORYBARRIER();
#endif

	/* Time to determine the card architecture */
	reg0 = nv_rd32(dev, NV03_PMC_BOOT_0);

	/* We're dealing with >=NV10 */
	if ((reg0 & 0x0f000000) > 0) {
		/* Bit 27-20 contain the architecture in hex */
		dev_priv->chipset = (reg0 & 0xff00000) >> 20;
	/* NV04 or NV05 */
	} else if ((reg0 & 0xff00fff0) == 0x20004000) {

开发者ID:EvanZheng，项目名称:linux-2.6，代码行数:60，代码来源:nouveau_state.c

示例13: legacy_perf_init

static void
legacy_perf_init(struct drm_device *dev)
{
	struct nouveau_device *device = nouveau_dev(dev);
	struct nouveau_drm *drm = nouveau_drm(dev);
	struct nvbios *bios = &drm->vbios;
	struct nouveau_pm *pm = nouveau_pm(dev);
	char *perf, *entry, *bmp = &bios->data[bios->offset];
	int headerlen, use_straps;

	if (bmp[5] < 0x5 || bmp[6] < 0x14) {
		NV_DEBUG(drm, "BMP version too old for perf\n");
		return;
	}

	perf = ROMPTR(dev, bmp[0x73]);
	if (!perf) {
		NV_DEBUG(drm, "No memclock table pointer found.\n");
		return;
	}

	switch (perf[0]) {
	case 0x12:
	case 0x14:
	case 0x18:
		use_straps = 0;
		headerlen = 1;
		break;
	case 0x01:
		use_straps = perf[1] & 1;
		headerlen = (use_straps ? 8 : 2);
		break;
	default:
		NV_WARN(drm, "Unknown memclock table version %x.\n", perf[0]);
		return;
	}

	entry = perf + headerlen;
	if (use_straps)
		entry += (nv_rd32(device, NV_PEXTDEV_BOOT_0) & 0x3c) >> 1;

	sprintf(pm->perflvl[0].name, "performance_level_0");
	pm->perflvl[0].memory = ROM16(entry[0]) * 20;
	pm->nr_perflvl = 1;
}

开发者ID:03199618，项目名称:linux，代码行数:45，代码来源:nouveau_perf.c

示例14: nv50_graph_init_intr

static void
nv50_graph_init_intr(struct drm_device *dev)
{
	NV_DEBUG(dev, "\n");

	nv_wr32(dev, NV03_PGRAPH_INTR, 0xffffffff);
	nv_wr32(dev, 0x400138, 0xffffffff);
	nv_wr32(dev, NV40_PGRAPH_INTR_EN, 0xffffffff);
}

开发者ID:mrparry86，项目名称:linux，代码行数:9，代码来源:nv50_graph.c

示例15: nv50_graph_init_reset

static void
nv50_graph_init_reset(struct drm_device *dev)
{
	uint32_t pmc_e = NV_PMC_ENABLE_PGRAPH | (1 << 21);
	NV_DEBUG(dev, "\n");

	nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) & ~pmc_e);
	nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) |  pmc_e);
}

开发者ID:mrparry86，项目名称:linux，代码行数:9，代码来源:nv50_graph.c

示例16: nv50_graph_init_regs

static void
nv50_graph_init_regs(struct drm_device *dev)
{
	NV_DEBUG(dev, "\n");

	nv_wr32(dev, NV04_PGRAPH_DEBUG_3,
				(1 << 2) /* HW_CONTEXT_SWITCH_ENABLED */);
	nv_wr32(dev, 0x402ca8, 0x800);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:9，代码来源:nv50_graph.c

示例17: nouveau_notifier_gpuobj_dtor

static void
nouveau_notifier_gpuobj_dtor(struct drm_device *dev,
			     struct nouveau_gpuobj *gpuobj)
{
	NV_DEBUG(dev, "\n");

	if (gpuobj->priv)
		nouveau_mem_free_block(gpuobj->priv);
}

开发者ID:AdrianHuang，项目名称:uclinux-robutest，代码行数:9，代码来源:nouveau_notifier.c

示例18: nouveau_dp_probe_oui

static void
nouveau_dp_probe_oui(struct drm_device *dev, struct nvkm_i2c_aux *aux, u8 *dpcd)
{
	struct nouveau_drm *drm = nouveau_drm(dev);
	u8 buf[3];

	if (!(dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
		return;

	if (!nvkm_rdaux(aux, DP_SINK_OUI, buf, 3))
		NV_DEBUG(drm, "Sink OUI: %02hx%02hx%02hx\n",
			     buf[0], buf[1], buf[2]);

	if (!nvkm_rdaux(aux, DP_BRANCH_OUI, buf, 3))
		NV_DEBUG(drm, "Branch OUI: %02hx%02hx%02hx\n",
			     buf[0], buf[1], buf[2]);

}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:18，代码来源:nouveau_dp.c

示例19: nouveau_dp_detect

int
nouveau_dp_detect(struct nouveau_encoder *nv_encoder)
{
	struct drm_device *dev = nv_encoder->base.base.dev;
	struct nouveau_drm *drm = nouveau_drm(dev);
	struct nvkm_i2c_aux *aux;
	u8 dpcd[8];
	int ret;

	aux = nv_encoder->aux;
	if (!aux)
		return -ENODEV;

	ret = nvkm_rdaux(aux, DP_DPCD_REV, dpcd, sizeof(dpcd));
	if (ret)
		return ret;

	nv_encoder->dp.link_bw = 27000 * dpcd[1];
	nv_encoder->dp.link_nr = dpcd[2] & DP_MAX_LANE_COUNT_MASK;

	NV_DEBUG(drm, "display: %dx%d dpcd 0x%02x\n",
		     nv_encoder->dp.link_nr, nv_encoder->dp.link_bw, dpcd[0]);
	NV_DEBUG(drm, "encoder: %dx%d\n",
		     nv_encoder->dcb->dpconf.link_nr,
		     nv_encoder->dcb->dpconf.link_bw);

	if (nv_encoder->dcb->dpconf.link_nr < nv_encoder->dp.link_nr)
		nv_encoder->dp.link_nr = nv_encoder->dcb->dpconf.link_nr;
	if (nv_encoder->dcb->dpconf.link_bw < nv_encoder->dp.link_bw)
		nv_encoder->dp.link_bw = nv_encoder->dcb->dpconf.link_bw;

	NV_DEBUG(drm, "maximum: %dx%d\n",
		     nv_encoder->dp.link_nr, nv_encoder->dp.link_bw);

	nouveau_dp_probe_oui(dev, aux, dpcd);

	ret = nv50_mstm_detect(nv_encoder->dp.mstm, dpcd, nouveau_mst);
	if (ret == 1)
		return NOUVEAU_DP_MST;
	if (ret == 0)
		return NOUVEAU_DP_SST;
	return ret;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:43，代码来源:nouveau_dp.c

示例20: nv50_graph_init_intr

static void
nv50_graph_init_intr(struct drm_device *dev)
{
	NV_DEBUG(dev, "\n");

	nouveau_irq_register(dev, 12, nv50_graph_isr);
	nv_wr32(dev, NV03_PGRAPH_INTR, 0xffffffff);
	nv_wr32(dev, 0x400138, 0xffffffff);
	nv_wr32(dev, NV40_PGRAPH_INTR_EN, 0xffffffff);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:10，代码来源:nv50_graph.c

注：本文中的NV_DEBUG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NV_ERROR函数代码示例发布时间：2022-05-30

C++ NV_DATA_S函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ NV_DEBUG函数代码示例

示例1: nv50_dac_detect

示例2: nva3_copy_context_new

示例3: nv50_graph_destroy_context

示例4: nv04_tv_dpms

示例5: nv50_graph_init_regs__nv

示例6: nv50_cursor_hide

示例7: nv50_dac_create

示例8: nva3_pm_clock_get

示例9: nv50_graph_takedown

示例10: nv50_mpeg_context_new

示例11: nv50_fifo_playlist_update

示例12: nouveau_load

示例13: legacy_perf_init

示例14: nv50_graph_init_intr

示例15: nv50_graph_init_reset

示例16: nv50_graph_init_regs

示例17: nouveau_notifier_gpuobj_dtor

示例18: nouveau_dp_probe_oui

示例19: nouveau_dp_detect

示例20: nv50_graph_init_intr

请发表评论

全部评论

上一篇：

下一篇：

受精卵着床有什么症状(女人备孕成功的5大症

krishnaik06/Machine-Learning-in-90-days

Delphi中TwwDBLookupCombo中属性的简单设置

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053