C++ NM_DEVICE函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NM_DEVICE函数的典型用法代码示例。如果您正苦于以下问题：C++ NM_DEVICE函数的具体用法？C++ NM_DEVICE怎么用？C++ NM_DEVICE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NM_DEVICE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: constructor

static GObject*
constructor (GType type,
			 guint n_construct_params,
			 GObjectConstructParam *construct_params)
{
	GObject *object;
	NMDeviceAdslPrivate *priv;
	GError *error = NULL;

	object = G_OBJECT_CLASS (nm_device_adsl_parent_class)->constructor (type,
	                                                                    n_construct_params,
	                                                                    construct_params);
	if (!object)
		return NULL;

	priv = NM_DEVICE_ADSL_GET_PRIVATE (object);

	priv->atm_index = get_atm_index (nm_device_get_iface (NM_DEVICE (object)), &error);
	if (priv->atm_index < 0) {
		nm_log_dbg (LOGD_ADSL, "error reading ATM device index: (%d) %s",
		            error ? error->code : -1,
		            error && error->message ? error->message : "(unknown)");
		g_clear_error (&error);
		g_object_unref (object);
		return NULL;
	} else {
		nm_log_dbg (LOGD_ADSL, "(%s): ATM device index %d",
				    nm_device_get_iface (NM_DEVICE (object)), priv->atm_index);
	}

	/* Poll the carrier */
	priv->carrier_poll_id = g_timeout_add_seconds (5, carrier_update_cb, object);

	return object;
}

开发者ID:vzupanovic，项目名称:projekt，代码行数:35，代码来源:nm-device-adsl.c

示例2: nm_device_bt_modem_removed

gboolean
nm_device_bt_modem_removed (NMDeviceBt *self, NMModem *modem)
{
    NMDeviceBtPrivate *priv;
    NMDeviceState state;

    g_return_val_if_fail (self != NULL, FALSE);
    g_return_val_if_fail (NM_IS_DEVICE_BT (self), FALSE);
    g_return_val_if_fail (modem != NULL, FALSE);
    g_return_val_if_fail (NM_IS_MODEM (modem), FALSE);

    priv = NM_DEVICE_BT_GET_PRIVATE (self);

    if (modem != priv->modem)
        return FALSE;

    /* Fail the device if the modem was removed while active */
    state = nm_device_get_state (NM_DEVICE (self));
    if (   state == NM_DEVICE_STATE_ACTIVATED
            || nm_device_is_activating (NM_DEVICE (self))) {
        nm_device_state_changed (NM_DEVICE (self),
                                 NM_DEVICE_STATE_FAILED,
                                 NM_DEVICE_STATE_REASON_BT_FAILED);
    } else {
        g_object_unref (priv->modem);
        priv->modem = NULL;
    }

    return TRUE;
}

开发者ID:vzupanovic，项目名称:Network-Manager-p.0.9.8.2，代码行数:30，代码来源:nm-device-bt.c

示例3: nm_act_request_new

NMActRequest *
nm_act_request_new (NMConnection *connection,
                    const char *specific_object,
                    gboolean user_requested,
                    gboolean assumed,
                    gpointer *device)
{
	GObject *object;
	NMActRequestPrivate *priv;

	g_return_val_if_fail (NM_IS_CONNECTION (connection), NULL);
	g_return_val_if_fail (NM_DEVICE (device), NULL);

	object = g_object_new (NM_TYPE_ACT_REQUEST, NULL);
	if (!object)
		return NULL;

	priv = NM_ACT_REQUEST_GET_PRIVATE (object);

	priv->connection = g_object_ref (connection);
	if (specific_object)
		priv->specific_object = g_strdup (specific_object);

	priv->device = NM_DEVICE (device);
	g_signal_connect (device, "state-changed",
	                  G_CALLBACK (device_state_changed),
	                  NM_ACT_REQUEST (object));

	priv->user_requested = user_requested;
	priv->assumed = assumed;

	return NM_ACT_REQUEST (object);
}

开发者ID:hicham-haouari，项目名称:NetworkManager-ADSL-Support，代码行数:33，代码来源:nm-activation-request.c

示例4: set_enabled

static void
set_enabled (NMDevice *device, gboolean enabled)
{
	NMDeviceWimax *self = NM_DEVICE_WIMAX (device);
	NMDeviceWimaxPrivate *priv = NM_DEVICE_WIMAX_GET_PRIVATE (self);
	gboolean old_available;
	int ret;
	const char *iface;

	iface = nm_device_get_iface (NM_DEVICE (self));

	nm_log_dbg (LOGD_WIMAX, "(%s): setting radio enabled %d -> %d",
	            iface, priv->enabled, enabled);
	if (priv->enabled == enabled)
		return;

	old_available = nm_device_is_available (NM_DEVICE (device));
	priv->enabled = enabled;

	nm_log_dbg (LOGD_WIMAX, "(%s): radio now %s",
	            iface, priv->enabled ? "enabled" : "disabled");

	/* Set the WiMAX device RF state to the current user-specified enabled state */
	if (priv->sdk) {
		ret = iwmx_sdk_rf_state_set (priv->sdk,
		                             enabled ? WIMAX_API_RF_ON : WIMAX_API_RF_OFF);
		if (ret < 0 && ret != -EINPROGRESS) {
			nm_log_warn (LOGD_WIMAX, "(%s): failed to %s radio",
			             iface, priv->enabled ? "enable" : "disable");
		}
	}

	update_availability (self, old_available);
}

开发者ID:aelarabawy，项目名称:NetworkManager，代码行数:34，代码来源:nm-device-wimax.c

示例5: carrier_action_defer_cb

static gboolean
carrier_action_defer_cb (gpointer user_data)
{
	NMDeviceWired *self = NM_DEVICE_WIRED (user_data);
	NMDeviceWiredPrivate *priv = NM_DEVICE_WIRED_GET_PRIVATE (self);
	NMDeviceState state;

	priv->carrier_action_defer_id = 0;

	state = nm_device_get_state (NM_DEVICE (self));
	if (state == NM_DEVICE_STATE_UNAVAILABLE) {
		if (priv->carrier)
			nm_device_queue_state (NM_DEVICE (self), NM_DEVICE_STATE_DISCONNECTED, NM_DEVICE_STATE_REASON_CARRIER);
		else {
			/* clear any queued state changes if they wouldn't be valid when the
			 * carrier is off.
			 */
			if (nm_device_queued_state_peek (NM_DEVICE (self)) >= NM_DEVICE_STATE_DISCONNECTED)
				nm_device_queued_state_clear (NM_DEVICE (self));
		}
	} else if (state >= NM_DEVICE_STATE_DISCONNECTED) {
		if (!priv->carrier)
			nm_device_queue_state (NM_DEVICE (self), NM_DEVICE_STATE_UNAVAILABLE, NM_DEVICE_STATE_REASON_CARRIER);
	}

	return FALSE;
}

开发者ID:alexander-naumov，项目名称:NetworkManager，代码行数:27，代码来源:nm-device-wired.c

示例6: act_stage1_prepare

static NMActStageReturn
act_stage1_prepare (NMDevice *device, NMDeviceStateReason *reason)
{
	NMDeviceOlpcMesh *self = NM_DEVICE_OLPC_MESH (device);
	NMDeviceOlpcMeshPrivate *priv = NM_DEVICE_OLPC_MESH_GET_PRIVATE (device);
	NMActStageReturn ret;
	gboolean scanning;

	ret = NM_DEVICE_CLASS (nm_device_olpc_mesh_parent_class)->act_stage1_prepare (device, reason);
	if (ret != NM_ACT_STAGE_RETURN_SUCCESS)
		return ret;

	/* disconnect companion device, if it is connected */
	if (nm_device_get_act_request (NM_DEVICE (priv->companion))) {
		_LOGI (LOGD_OLPC, "disconnecting companion device %s",
		       nm_device_get_iface (priv->companion));
		/* FIXME: VPN stuff here is a bug; but we can't really change API now... */
		nm_device_state_changed (NM_DEVICE (priv->companion),
		                         NM_DEVICE_STATE_DISCONNECTED,
		                         NM_DEVICE_STATE_REASON_USER_REQUESTED);
		_LOGI (LOGD_OLPC, "companion %s disconnected",
		       nm_device_get_iface (priv->companion));
	}


	/* wait with continuing configuration untill the companion device is done scanning */
	g_object_get (priv->companion, "scanning", &scanning, NULL);
	if (scanning) {
		priv->stage1_waiting = TRUE;
		return NM_ACT_STAGE_RETURN_POSTPONE;
	}

	return NM_ACT_STAGE_RETURN_SUCCESS;
}

开发者ID:aelarabawy，项目名称:NetworkManager，代码行数:34，代码来源:nm-device-olpc-mesh.c

示例7: constructor

static GObject*
constructor (GType type,
             guint n_construct_params,
             GObjectConstructParam *construct_params)
{
	GObject *object;
	GObjectClass *klass;
	NMDeviceOlpcMesh *self;
	NMDeviceWifiCapabilities caps;

	klass = G_OBJECT_CLASS (nm_device_olpc_mesh_parent_class);
	object = klass->constructor (type, n_construct_params, construct_params);
	if (!object)
		return NULL;

	self = NM_DEVICE_OLPC_MESH (object);

	if (!nm_platform_wifi_get_capabilities (nm_device_get_ifindex (NM_DEVICE (self)), &caps)) {
		_LOGW (LOGD_HW | LOGD_OLPC, "failed to initialize WiFi driver");
		g_object_unref (object);
		return NULL;
	}

	g_signal_connect (nm_manager_get (), "device-added", G_CALLBACK (device_added_cb), self);
	g_signal_connect (nm_manager_get (), "device-removed", G_CALLBACK (device_removed_cb), self);

	/* shorter timeout for mesh connectivity */
	nm_device_set_dhcp_timeout (NM_DEVICE (self), 20);
	return object;
}

开发者ID:aelarabawy，项目名称:NetworkManager，代码行数:30，代码来源:nm-device-olpc-mesh.c

示例8: carrier_update_cb

static gboolean
carrier_update_cb (gpointer user_data)
{
	NMDeviceAdsl *self = NM_DEVICE_ADSL (user_data);
	GError *error = NULL;
	gboolean carrier = FALSE;
	char *path, *contents;
	const char *iface;
	gboolean success;

	iface = nm_device_get_iface (NM_DEVICE (self));

	path  = g_strdup_printf ("/sys/class/atm/%s/carrier", iface);
	success = g_file_get_contents (path, &contents, NULL, &error);
	g_free (path);

	if (!success) {
		nm_log_dbg (LOGD_ADSL, "error reading %s: (%d) %s",
		            path,
		            error ? error->code : -1,
		            error && error->message ? error->message : "(unknown)");
		g_clear_error (&error);
		return TRUE;
	}

	carrier = (gboolean) atoi (contents);
	g_free (contents);
	nm_device_set_carrier (NM_DEVICE (self), carrier);
	return TRUE;
}

开发者ID:vzupanovic，项目名称:projekt，代码行数:30，代码来源:nm-device-adsl.c

示例9: get_property

static void
get_property (GObject *object, guint prop_id,
              GValue *value, GParamSpec *pspec)
{
	NMDeviceBridgePrivate *priv = NM_DEVICE_BRIDGE_GET_PRIVATE (object);
	GPtrArray *slaves;
	GSList *list, *iter;
	char *hwaddr;

	switch (prop_id) {
	case PROP_HW_ADDRESS:
		hwaddr = nm_utils_hwaddr_ntoa (priv->hw_addr, nm_utils_hwaddr_type (priv->hw_addr_len));
		g_value_take_string (value, hwaddr);
		break;
	case PROP_CARRIER:
		g_value_set_boolean (value, nm_device_wired_get_carrier (NM_DEVICE_WIRED (object)));
		break;
	case PROP_SLAVES:
		slaves = g_ptr_array_new ();
		list = nm_device_master_get_slaves (NM_DEVICE (object));
		for (iter = list; iter; iter = iter->next)
			g_ptr_array_add (slaves, g_strdup (nm_device_get_path (NM_DEVICE (iter->data))));
		g_slist_free (list);
		g_value_take_boxed (value, slaves);
		break;
	default:
		G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
		break;
	}
}

开发者ID:T100012，项目名称:NetworkManager，代码行数:30，代码来源:nm-device-bridge.c

示例10: constructed

static void
constructed (GObject *object)
{
	G_OBJECT_CLASS (nm_device_bridge_parent_class)->constructed (object);

	nm_log_dbg (LOGD_HW | LOGD_BRIDGE, "(%s): kernel ifindex %d",
	            nm_device_get_iface (NM_DEVICE (object)),
	            nm_device_get_ifindex (NM_DEVICE (object)));
}

开发者ID:heftig，项目名称:NetworkManager，代码行数:9，代码来源:nm-device-bridge.c

示例11: emit_nsp_added_removed

static void
emit_nsp_added_removed (NMDeviceWimax *self,
                        guint signum,
                        NMWimaxNsp *nsp,
                        gboolean recheck_available_connections)
{
	g_signal_emit (self, signals[signum], 0, nsp);
	g_object_notify (G_OBJECT (self), NM_DEVICE_WIMAX_NSPS);
	nm_device_emit_recheck_auto_activate (NM_DEVICE (self));
	if (recheck_available_connections)
		nm_device_recheck_available_connections (NM_DEVICE (self));
}

开发者ID:aelarabawy，项目名称:NetworkManager，代码行数:12，代码来源:nm-device-wimax.c

示例12: nm_act_request_new

/**
 * nm_act_request_new:
 *
 * @connection: the connection to activate @device with
 * @specific_object: the object path of the specific object (ie, WiFi access point,
 *    etc) that will be used to activate @connection and @device
 * @user_requested: pass %TRUE if the activation was requested via D-Bus,
 *    otherwise %FALSE if requested internally by NM (ie, autoconnect)
 * @user_uid: if @user_requested is %TRUE, the Unix UID of the user that requested
 * @dbus_sender: if @user_requested is %TRUE, the D-BUS sender that requested
 *    the activation
 * @assumed: pass %TRUE if the activation should "assume" (ie, taking over) an
 *    existing connection made before this instance of NM started
 * @device: the device/interface to configure according to @connection
 * @dependency: if the activation depends on another device (ie, VLAN slave,
 *    bond slave, etc) pass the #NMActiveConnection that this activation request
 *    should wait for before proceeding
 *
 * Begins activation of @device using the given @connection and other details.
 *
 * Returns: the new activation request on success, %NULL on error.
 */
NMActRequest *
nm_act_request_new (NMConnection *connection,
                    const char *specific_object,
                    gboolean user_requested,
                    gulong user_uid,
                    const char *dbus_sender,
                    gboolean assumed,
                    gpointer *device,
                    NMActiveConnection *dependency)
{
	GObject *object;
	NMActRequestPrivate *priv;

	g_return_val_if_fail (NM_IS_CONNECTION (connection), NULL);
	g_return_val_if_fail (NM_DEVICE (device), NULL);

	object = g_object_new (NM_TYPE_ACT_REQUEST,
	                       NM_ACTIVE_CONNECTION_SPECIFIC_OBJECT, specific_object,
	                       NULL);
	if (!object)
		return NULL;

	priv = NM_ACT_REQUEST_GET_PRIVATE (object);

	priv->connection = g_object_ref (connection);
	priv->device = NM_DEVICE (device);
	g_signal_connect (device, "state-changed",
	                  G_CALLBACK (device_state_changed),
	                  NM_ACT_REQUEST (object));

	priv->user_uid = user_uid;
	priv->user_requested = user_requested;
	priv->dbus_sender = g_strdup (dbus_sender);
	priv->assumed = assumed;

	if (dependency) {
		priv->dep = dependency;
		g_object_weak_ref (G_OBJECT (dependency), (GWeakNotify) dep_gone, object);
		priv->dep_state_id = g_signal_connect (dependency,
		                                       "notify::" NM_ACTIVE_CONNECTION_STATE,
		                                       G_CALLBACK (dep_state_changed),
		                                       object);
	}

	if (!nm_active_connection_export (NM_ACTIVE_CONNECTION (object),
	                                  connection,
	                                  nm_device_get_path (NM_DEVICE (device)))) {
		g_object_unref (object);
		object = NULL;
	}

	return (NMActRequest *) object;
}

开发者ID:alexander-naumov，项目名称:NetworkManager，代码行数:75，代码来源:nm-activation-request.c

示例13: device_added_cb

static void
device_added_cb (NMManager *manager, NMDevice *other, gpointer user_data)
{
	NMDeviceOlpcMesh *self = NM_DEVICE_OLPC_MESH (user_data);
	NMDeviceOlpcMeshPrivate *priv = NM_DEVICE_OLPC_MESH_GET_PRIVATE (self);

	if (!priv->companion && check_companion (self, other)) {
		nm_device_state_changed (NM_DEVICE (self),
		                         NM_DEVICE_STATE_DISCONNECTED,
		                         NM_DEVICE_STATE_REASON_NONE);
		nm_device_remove_pending_action (NM_DEVICE (self), "waiting for companion", TRUE);
	}
}

开发者ID:aelarabawy，项目名称:NetworkManager，代码行数:13，代码来源:nm-device-olpc-mesh.c

示例14: bt_connect_timeout

static gboolean
bt_connect_timeout (gpointer user_data)
{
	NMDeviceBt *self = NM_DEVICE_BT (user_data);

	nm_log_dbg (LOGD_BT, "(%s): initial connection timed out",
	            nm_device_get_iface (NM_DEVICE (self)));

	NM_DEVICE_BT_GET_PRIVATE (self)->timeout_id = 0;
	nm_device_state_changed (NM_DEVICE (self),
	                         NM_DEVICE_STATE_FAILED,
	                         NM_DEVICE_STATE_REASON_BT_FAILED);
	return FALSE;
}

开发者ID:eugeni，项目名称:NetworkManager-mdv，代码行数:14，代码来源:nm-device-bt.c

示例15: link_timeout_cb

static gboolean
link_timeout_cb (gpointer user_data)
{
	NMDeviceWimax *self = NM_DEVICE_WIMAX (user_data);
	NMDeviceWimaxPrivate *priv = NM_DEVICE_WIMAX_GET_PRIVATE (self);

	priv->link_timeout_id = 0;

	nm_log_dbg (LOGD_WIMAX, "(%s): link timed out", nm_device_get_iface (NM_DEVICE (self)));
	nm_device_state_changed (NM_DEVICE (self),
	                         NM_DEVICE_STATE_FAILED,
	                         NM_DEVICE_STATE_REASON_CARRIER);

	return FALSE;
}

开发者ID:aelarabawy，项目名称:NetworkManager，代码行数:15，代码来源:nm-device-wimax.c

示例16: carrier_update_cb

static gboolean
carrier_update_cb (gpointer user_data)
{
	NMDeviceAdsl *self = NM_DEVICE_ADSL (user_data);
	int carrier;
	char *path;

	path  = g_strdup_printf ("/sys/class/atm/%s/carrier",
	                         ASSERT_VALID_PATH_COMPONENT (nm_device_get_iface (NM_DEVICE (self))));
	carrier = (int) nm_platform_sysctl_get_int_checked (NM_PLATFORM_GET, path, 10, 0, 1, -1);
	g_free (path);

	if (carrier != -1)
		nm_device_set_carrier (NM_DEVICE (self), carrier);
	return TRUE;
}

开发者ID:gunchleoc，项目名称:NetworkManager，代码行数:16，代码来源:nm-device-adsl.c

示例17: deactivate

static void
deactivate (NMDevice *device)
{
	NMDeviceAdsl *self = NM_DEVICE_ADSL (device);
	NMDeviceAdslPrivate *priv = NM_DEVICE_ADSL_GET_PRIVATE (self);

	if (priv->ppp_manager) {
		g_object_unref (priv->ppp_manager);
		priv->ppp_manager = NULL;
	}

	if (priv->lost_link_id) {
		g_signal_handler_disconnect (nm_platform_get (), priv->lost_link_id);
		priv->lost_link_id = 0;
	}

	if (priv->brfd >= 0) {
		close (priv->brfd);
		priv->brfd = -1;
	}

	/* FIXME: kernel has no way of explicitly deleting the 'nasX' interface yet,
	 * so it gets leaked.  It does get destroyed when it's no longer in use,
	 * but we have no control over that.
	 */
	if (priv->nas_ifindex >= 0)
		priv->nas_ifindex = -1;
	g_free (priv->nas_ifname);
	priv->nas_ifname = NULL;

	/* Poke NMDevice to notice that our hw_address is no longer valid */
	nm_device_update_hw_address (NM_DEVICE (self));
}

开发者ID:vzupanovic，项目名称:projekt，代码行数:33，代码来源:nm-device-adsl.c

示例18: constructed

static void
constructed (GObject *object)
{
	update_properties (NM_DEVICE (object));

	G_OBJECT_CLASS (nm_device_macvlan_parent_class)->constructed (object);
}

开发者ID:benquach16，项目名称:NetworkManager，代码行数:7，代码来源:nm-device-macvlan.c

示例19: nm_device_wimax_get_active_nsp

/**
 * nm_device_wimax_get_active_nsp:
 * @wimax: a #NMDeviceWimax
 *
 * Gets the active #NMWimaxNsp.
 *
 * Returns: (transfer full): the access point or %NULL if none is active
 *
 * Deprecated: 1.2: WiMAX is no longer supported.
 **/
NMWimaxNsp *
nm_device_wimax_get_active_nsp (NMDeviceWimax *wimax)
{
	NMDeviceState state;

	g_return_val_if_fail (NM_IS_DEVICE_WIMAX (wimax), NULL);

	state = nm_device_get_state (NM_DEVICE (wimax));
	switch (state) {
	case NM_DEVICE_STATE_PREPARE:
	case NM_DEVICE_STATE_CONFIG:
	case NM_DEVICE_STATE_NEED_AUTH:
	case NM_DEVICE_STATE_IP_CONFIG:
	case NM_DEVICE_STATE_IP_CHECK:
	case NM_DEVICE_STATE_SECONDARIES:
	case NM_DEVICE_STATE_ACTIVATED:
	case NM_DEVICE_STATE_DEACTIVATING:
		break;
	default:
		return NULL;
		break;
	}

	return NM_DEVICE_WIMAX_GET_PRIVATE (wimax)->active_nsp;
}

开发者ID:NetworkManager，项目名称:NetworkManager，代码行数:35，代码来源:nm-device-wimax.c

示例20: device_master_changed

static void
device_master_changed (GObject *object,
                       GParamSpec *pspec,
                       gpointer user_data)
{
	NMDevice *device = NM_DEVICE (object);
	NMActiveConnection *self = NM_ACTIVE_CONNECTION (user_data);
	NMActiveConnection *master;
	NMActiveConnectionState master_state;

	if (NM_ACTIVE_CONNECTION (nm_device_get_act_request (device)) != self)
		return;
	if (!nm_device_get_master (device))
		return;
	if (!nm_active_connection_get_master (self))
		return;
	g_signal_handlers_disconnect_by_func (device, G_CALLBACK (device_master_changed), self);

	master = nm_active_connection_get_master (self);
	master_state = nm_active_connection_get_state (master);
	if (master_state >= NM_ACTIVE_CONNECTION_STATE_DEACTIVATING) {
		/* Master failed before attaching the slave */
		if (NM_ACTIVE_CONNECTION_GET_CLASS (self)->master_failed)
			NM_ACTIVE_CONNECTION_GET_CLASS (self)->master_failed (self);
	}
}

开发者ID:abferm，项目名称:network-manager，代码行数:26，代码来源:nm-active-connection.c

注：本文中的NM_DEVICE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NM_DEVICE_BT_GET_PRIVATE函数代码示例发布时间：2022-05-30

C++ NM_CONNECTION函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8649|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ NM_DEVICE函数代码示例

示例1: constructor

示例2: nm_device_bt_modem_removed

示例3: nm_act_request_new

示例4: set_enabled

示例5: carrier_action_defer_cb

示例6: act_stage1_prepare

示例7: constructor

示例8: carrier_update_cb

示例9: get_property

示例10: constructed

示例11: emit_nsp_added_removed

示例12: nm_act_request_new

示例13: device_added_cb

示例14: bt_connect_timeout

示例15: link_timeout_cb

示例16: carrier_update_cb

示例17: deactivate

示例18: constructed

示例19: nm_device_wimax_get_active_nsp

示例20: device_master_changed

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

CVE-2022-1479

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053