C++ NLA_PUT_U8函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NLA_PUT_U8函数的典型用法代码示例。如果您正苦于以下问题：C++ NLA_PUT_U8函数的具体用法？C++ NLA_PUT_U8怎么用？C++ NLA_PUT_U8使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NLA_PUT_U8函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ieee802154_nl_scan_confirm

int ieee802154_nl_scan_confirm(struct net_device *dev,
		u8 status, u8 scan_type, u32 unscanned, u8 page,
		u8 *edl/*                                   */)
{
	struct sk_buff *msg;

	pr_debug("%s\n", __func__);

	msg = ieee802154_nl_create(0, IEEE802154_SCAN_CONF);
	if (!msg)
		return -ENOBUFS;

	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
			dev->dev_addr);

	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
	NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, scan_type);
	NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, unscanned);
	NLA_PUT_U8(msg, IEEE802154_ATTR_PAGE, page);

	if (edl)
		NLA_PUT(msg, IEEE802154_ATTR_ED_LIST, 27, edl);

	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);

nla_put_failure:
	nlmsg_free(msg);
	return -ENOBUFS;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:31，代码来源:nl-mac.c

示例2: __near_netlink_dep_link_up

int __near_netlink_dep_link_up(uint32_t idx, uint32_t target_idx,
				uint8_t comm_mode, uint8_t rf_mode)
{
	struct nl_msg *msg;
	void *hdr;
	int err;

	DBG("");

	msg = nlmsg_alloc();
	if (!msg)
		return -ENOMEM;

	hdr = genlmsg_put(msg, NL_AUTO_PID, NL_AUTO_SEQ, nfc_state->nfc_id, 0,
			NLM_F_REQUEST, NFC_CMD_DEP_LINK_UP, NFC_GENL_VERSION);
	if (!hdr) {
		err = -EINVAL;
		goto nla_put_failure;
	}

	err = -EMSGSIZE;

	NLA_PUT_U32(msg, NFC_ATTR_DEVICE_INDEX, idx);
	NLA_PUT_U32(msg, NFC_ATTR_TARGET_INDEX, target_idx);
	NLA_PUT_U8(msg, NFC_ATTR_COMM_MODE, comm_mode);
	NLA_PUT_U8(msg, NFC_ATTR_RF_MODE, rf_mode);

	err = nl_send_msg(nfc_state->cmd_sock, msg, NULL, NULL);

nla_put_failure:
	nlmsg_free(msg);

	return err;
}

开发者ID:aklein53，项目名称:neard，代码行数:34，代码来源:netlink.c

示例3: l2tp_nl_session_send

static int l2tp_nl_session_send(struct sk_buff *skb, u32 pid, u32 seq, int flags,
				struct l2tp_session *session)
{
	void *hdr;
	struct nlattr *nest;
	struct l2tp_tunnel *tunnel = session->tunnel;
	struct sock *sk = NULL;

	sk = tunnel->sock;

	hdr = genlmsg_put(skb, pid, seq, &l2tp_nl_family, flags, L2TP_CMD_SESSION_GET);
	if (IS_ERR(hdr))
		return PTR_ERR(hdr);

	NLA_PUT_U32(skb, L2TP_ATTR_CONN_ID, tunnel->tunnel_id);
	NLA_PUT_U32(skb, L2TP_ATTR_SESSION_ID, session->session_id);
	NLA_PUT_U32(skb, L2TP_ATTR_PEER_CONN_ID, tunnel->peer_tunnel_id);
	NLA_PUT_U32(skb, L2TP_ATTR_PEER_SESSION_ID, session->peer_session_id);
	NLA_PUT_U32(skb, L2TP_ATTR_DEBUG, session->debug);
	NLA_PUT_U16(skb, L2TP_ATTR_PW_TYPE, session->pwtype);
	NLA_PUT_U16(skb, L2TP_ATTR_MTU, session->mtu);
	if (session->mru)
		NLA_PUT_U16(skb, L2TP_ATTR_MRU, session->mru);

	if (session->ifname && session->ifname[0])
		NLA_PUT_STRING(skb, L2TP_ATTR_IFNAME, session->ifname);
	if (session->cookie_len)
		NLA_PUT(skb, L2TP_ATTR_COOKIE, session->cookie_len, &session->cookie[0]);
	if (session->peer_cookie_len)
		NLA_PUT(skb, L2TP_ATTR_PEER_COOKIE, session->peer_cookie_len, &session->peer_cookie[0]);
	NLA_PUT_U8(skb, L2TP_ATTR_RECV_SEQ, session->recv_seq);
	NLA_PUT_U8(skb, L2TP_ATTR_SEND_SEQ, session->send_seq);
	NLA_PUT_U8(skb, L2TP_ATTR_LNS_MODE, session->lns_mode);
#ifdef CONFIG_XFRM
	if ((sk) && (sk->sk_policy[0] || sk->sk_policy[1]))
		NLA_PUT_U8(skb, L2TP_ATTR_USING_IPSEC, 1);
#endif
	if (session->reorder_timeout)
		NLA_PUT_MSECS(skb, L2TP_ATTR_RECV_TIMEOUT, session->reorder_timeout);

	nest = nla_nest_start(skb, L2TP_ATTR_STATS);
	if (nest == NULL)
		goto nla_put_failure;
	NLA_PUT_U64(skb, L2TP_ATTR_TX_PACKETS, session->stats.tx_packets);
	NLA_PUT_U64(skb, L2TP_ATTR_TX_BYTES, session->stats.tx_bytes);
	NLA_PUT_U64(skb, L2TP_ATTR_TX_ERRORS, session->stats.tx_errors);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_PACKETS, session->stats.rx_packets);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_BYTES, session->stats.rx_bytes);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_SEQ_DISCARDS, session->stats.rx_seq_discards);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_OOS_PACKETS, session->stats.rx_oos_packets);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_ERRORS, session->stats.rx_errors);
	nla_nest_end(skb, nest);

	return genlmsg_end(skb, hdr);

 nla_put_failure:
	genlmsg_cancel(skb, hdr);
	return -1;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:59，代码来源:l2tp_netlink.c

示例4: l2tp_nl_tunnel_send

static int l2tp_nl_tunnel_send(struct sk_buff *skb, u32 pid, u32 seq, int flags,
			       struct l2tp_tunnel *tunnel)
{
	void *hdr;
	struct nlattr *nest;
	struct sock *sk = NULL;
	struct inet_sock *inet;

	hdr = genlmsg_put(skb, pid, seq, &l2tp_nl_family, flags,
			  L2TP_CMD_TUNNEL_GET);
	if (IS_ERR(hdr))
		return PTR_ERR(hdr);

	NLA_PUT_U8(skb, L2TP_ATTR_PROTO_VERSION, tunnel->version);
	NLA_PUT_U32(skb, L2TP_ATTR_CONN_ID, tunnel->tunnel_id);
	NLA_PUT_U32(skb, L2TP_ATTR_PEER_CONN_ID, tunnel->peer_tunnel_id);
	NLA_PUT_U32(skb, L2TP_ATTR_DEBUG, tunnel->debug);
	NLA_PUT_U16(skb, L2TP_ATTR_ENCAP_TYPE, tunnel->encap);

	nest = nla_nest_start(skb, L2TP_ATTR_STATS);
	if (nest == NULL)
		goto nla_put_failure;

	NLA_PUT_U64(skb, L2TP_ATTR_TX_PACKETS, tunnel->stats.tx_packets);
	NLA_PUT_U64(skb, L2TP_ATTR_TX_BYTES, tunnel->stats.tx_bytes);
	NLA_PUT_U64(skb, L2TP_ATTR_TX_ERRORS, tunnel->stats.tx_errors);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_PACKETS, tunnel->stats.rx_packets);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_BYTES, tunnel->stats.rx_bytes);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_SEQ_DISCARDS, tunnel->stats.rx_seq_discards);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_OOS_PACKETS, tunnel->stats.rx_oos_packets);
	NLA_PUT_U64(skb, L2TP_ATTR_RX_ERRORS, tunnel->stats.rx_errors);
	nla_nest_end(skb, nest);

	sk = tunnel->sock;
	if (!sk)
		goto out;

	inet = inet_sk(sk);

	switch (tunnel->encap) {
	case L2TP_ENCAPTYPE_UDP:
		NLA_PUT_U16(skb, L2TP_ATTR_UDP_SPORT, ntohs(inet->inet_sport));
		NLA_PUT_U16(skb, L2TP_ATTR_UDP_DPORT, ntohs(inet->inet_dport));
		NLA_PUT_U8(skb, L2TP_ATTR_UDP_CSUM, (sk->sk_no_check != UDP_CSUM_NOXMIT));
		/* NOBREAK */
	case L2TP_ENCAPTYPE_IP:
		NLA_PUT_BE32(skb, L2TP_ATTR_IP_SADDR, inet->inet_saddr);
		NLA_PUT_BE32(skb, L2TP_ATTR_IP_DADDR, inet->inet_daddr);
		break;
	}

out:
	return genlmsg_end(skb, hdr);

nla_put_failure:
	genlmsg_cancel(skb, hdr);
	return -1;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:58，代码来源:l2tp_netlink.c

示例5: scan_request

static iz_res_t scan_request(struct iz_cmd *cmd, struct nl_msg *msg) {
	int type;
	int duration;
	char *dummy;
	int channels;

	if (cmd->argc != 5) {
		printf("Incorrect number of arguments!\n");
		return IZ_STOP_ERR;
	}

	if (!cmd->argv[1])
		return IZ_STOP_ERR;
	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, cmd->argv[1]);

	if (!cmd->argv[2])
		return IZ_STOP_ERR;
	if (!strcmp(cmd->argv[2], "ed")) {
		type = IEEE802154_MAC_SCAN_ED;
	} else if (!strcmp(cmd->argv[2], "active")) {
		type = IEEE802154_MAC_SCAN_ACTIVE;
	} else if (!strcmp(cmd->argv[2], "passive")) {
		type = IEEE802154_MAC_SCAN_PASSIVE;
	} else if (!strcmp(cmd->argv[2], "orphan")) {
		type = IEEE802154_MAC_SCAN_ORPHAN;
	} else {
		printf("Unknown scan type %s!\n", cmd->argv[2]);
		return IZ_STOP_ERR;
	}

	if (!cmd->argv[3])
		return IZ_STOP_ERR;
	channels = strtol(cmd->argv[3], &dummy, 16);
	if (*dummy) {
		printf("Bad channels %s!\n", cmd->argv[3]);
		return IZ_STOP_ERR;
	}

	if (!cmd->argv[4])
		return IZ_STOP_ERR;
	duration = strtol(cmd->argv[4], &dummy, 10);
	if (*dummy) {
		printf("Bad duration %s!\n", cmd->argv[4]);
		return IZ_STOP_ERR;
	}

	NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, type);
	NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, channels);
	NLA_PUT_U8(msg, IEEE802154_ATTR_DURATION, duration);

	return IZ_CONT_OK;

nla_put_failure:
	return IZ_STOP_ERR;
}

开发者ID:FabianKnapp，项目名称:android-wmon，代码行数:55，代码来源:iz-mac.c

示例6: icmpv6_tuple_to_nlattr

static int icmpv6_tuple_to_nlattr(struct sk_buff *skb,
				  const struct nf_conntrack_tuple *t)
{
	NLA_PUT_BE16(skb, CTA_PROTO_ICMPV6_ID, t->src.u.icmp.id);
	NLA_PUT_U8(skb, CTA_PROTO_ICMPV6_TYPE, t->dst.u.icmp.type);
	NLA_PUT_U8(skb, CTA_PROTO_ICMPV6_CODE, t->dst.u.icmp.code);

	return 0;

nla_put_failure:
	return -1;
}

开发者ID:AdrianHuang，项目名称:uclinux-robutest，代码行数:12，代码来源:nf_conntrack_proto_icmpv6.c

示例7: parse_4addr_flag

static int parse_4addr_flag(const char *value, struct nl_msg *msg)
{
	if (strcmp(value, "on") == 0)
		NLA_PUT_U8(msg, NL80211_ATTR_4ADDR, 1);
	else if (strcmp(value, "off") == 0)
		NLA_PUT_U8(msg, NL80211_ATTR_4ADDR, 0);
	else
		return 1;
	return 0;

nla_put_failure:
	return 1;
}

开发者ID:791254467，项目名称:android_device_lenovo_s899t，代码行数:13，代码来源:interface.c

示例8: join_mesh

int join_mesh(char* ifname, char *mesh_id, int mesh_id_len, char *vendor_ie, int vendor_ie_len)
{
        struct nl_msg *msg;
        uint8_t cmd = NL80211_CMD_JOIN_MESH;
        int ret;
	char *pret;

        int ifindex = if_nametoindex(ifname);

        msg = nlmsg_alloc();
        if (!msg)
                return -ENOMEM;

	if (!mesh_id || !mesh_id_len)
		return -EINVAL;

        printf("o11s-pathseld: Staring mesh with mesh id = %s\n", mesh_id);

	pret = genlmsg_put(msg, 0, 0,
		genl_family_get_id(nlcfg.nl80211), 0, 0, cmd, 0);
	if (pret == NULL)
		goto nla_put_failure;

	if (vendor_ie) {
		struct nlattr *container = nla_nest_start(msg,
				NL80211_ATTR_MESH_PARAMS);

		if (!container)
			return -ENOBUFS;

		NLA_PUT(msg, NL80211_MESHCONF_VENDOR_PATH_SEL_IE,
				vendor_ie_len, vendor_ie);
		NLA_PUT_U8(msg, NL80211_MESHCONF_ENABLE_VENDOR_PATH_SEL, 1);
		NLA_PUT_U8(msg, NL80211_MESHCONF_ENABLE_VENDOR_METRIC, 1);
		nla_nest_end(msg, container);
	}

        NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, ifindex);
        NLA_PUT(msg, NL80211_ATTR_MESH_ID, mesh_id_len, mesh_id);

        ret = send_and_recv_msgs(msg, NULL, NULL);
        if (ret)
		printf("Mesh start failed: %d (%s)\n", ret,
			strerror(-ret));
	else
		printf("Mesh start succeeded.  Yay!\n");

        return ret;
 nla_put_failure:
        return -ENOBUFS;
}

开发者ID:cozybit，项目名称:o11s-pathseld，代码行数:51，代码来源:main.c

示例9: plt_get_rx_statcs

static int plt_get_rx_statcs(struct nl80211_state *state, struct nl_cb *cb,
			struct nl_msg *msg, int argc, char **argv)
{
	struct nlattr *key;
	struct wl1271_radio_rx_statcs prms;

	prms.test.id = TEST_CMD_RX_STAT_GET;

	key = nla_nest_start(msg, NL80211_ATTR_TESTDATA);
	if (!key) {
		fprintf(stderr, "%s> fail to nla_nest_start()\n", __func__);
		return 1;
	}

	NLA_PUT_U32(msg, WL1271_TM_ATTR_CMD_ID, WL1271_TM_CMD_TEST);
	NLA_PUT(msg, WL1271_TM_ATTR_DATA, sizeof(prms), &prms);
	NLA_PUT_U8(msg, WL1271_TM_ATTR_ANSWER, 1);

	nla_nest_end(msg, key);

	nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, display_rx_statcs, NULL);

	/* Important: needed gap between tx_start and tx_get */
	sleep(2);

	return 0;

nla_put_failure:
	fprintf(stderr, "%s> building message failed\n", __func__);
	return 2;
}

开发者ID:PavanSavoy，项目名称:ti-utils，代码行数:31，代码来源:plt.c

示例10: nfc_genl_send_target

static int nfc_genl_send_target(struct sk_buff *msg, struct nfc_target *target,
				struct netlink_callback *cb, int flags)
{
	void *hdr;

	hdr = genlmsg_put(msg, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq,
			  &nfc_genl_family, flags, NFC_CMD_GET_TARGET);
	if (!hdr)
		return -EMSGSIZE;

	genl_dump_check_consistent(cb, hdr, &nfc_genl_family);

	NLA_PUT_U32(msg, NFC_ATTR_TARGET_INDEX, target->idx);
	NLA_PUT_U32(msg, NFC_ATTR_PROTOCOLS, target->supported_protocols);
	NLA_PUT_U16(msg, NFC_ATTR_TARGET_SENS_RES, target->sens_res);
	NLA_PUT_U8(msg, NFC_ATTR_TARGET_SEL_RES, target->sel_res);
	if (target->nfcid1_len > 0)
		NLA_PUT(msg, NFC_ATTR_TARGET_NFCID1, target->nfcid1_len,
			target->nfcid1);
	if (target->sensb_res_len > 0)
		NLA_PUT(msg, NFC_ATTR_TARGET_SENSB_RES, target->sensb_res_len,
			target->sensb_res);
	if (target->sensf_res_len > 0)
		NLA_PUT(msg, NFC_ATTR_TARGET_SENSF_RES, target->sensf_res_len,
			target->sensf_res);

	return genlmsg_end(msg, hdr);

nla_put_failure:
	genlmsg_cancel(msg, hdr);
	return -EMSGSIZE;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:32，代码来源:netlink.c

示例11: ieee802154_nl_disassoc_indic

int ieee802154_nl_disassoc_indic(struct net_device *dev,
		struct ieee802154_addr *addr, u8 reason)
{
	struct sk_buff *msg;

	pr_debug("%s\n", __func__);

	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_INDIC);
	if (!msg)
		return -ENOBUFS;

	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
			dev->dev_addr);

	if (addr->addr_type == IEEE802154_ADDR_LONG)
		NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
				addr->hwaddr);
	else
		NLA_PUT_U16(msg, IEEE802154_ATTR_SRC_SHORT_ADDR,
				addr->short_addr);

	NLA_PUT_U8(msg, IEEE802154_ATTR_REASON, reason);

	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);

nla_put_failure:
	nlmsg_free(msg);
	return -ENOBUFS;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:31，代码来源:nl-mac.c

示例12: nfc_genl_send_device

static int nfc_genl_send_device(struct sk_buff *msg, struct nfc_dev *dev,
				u32 pid, u32 seq,
				struct netlink_callback *cb,
				int flags)
{
	void *hdr;

	hdr = genlmsg_put(msg, pid, seq, &nfc_genl_family, flags,
			  NFC_CMD_GET_DEVICE);
	if (!hdr)
		return -EMSGSIZE;

	if (cb)
		genl_dump_check_consistent(cb, hdr, &nfc_genl_family);

	NLA_PUT_STRING(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev));
	NLA_PUT_U32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx);
	NLA_PUT_U32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols);
	NLA_PUT_U8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up);

	return genlmsg_end(msg, hdr);

nla_put_failure:
	genlmsg_cancel(msg, hdr);
	return -EMSGSIZE;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:26，代码来源:netlink.c

示例13: nfc_genl_device_added

int nfc_genl_device_added(struct nfc_dev *dev)
{
	struct sk_buff *msg;
	void *hdr;

	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
	if (!msg)
		return -ENOMEM;

	hdr = genlmsg_put(msg, 0, 0, &nfc_genl_family, 0,
			  NFC_EVENT_DEVICE_ADDED);
	if (!hdr)
		goto free_msg;

	NLA_PUT_STRING(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev));
	NLA_PUT_U32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx);
	NLA_PUT_U32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols);
	NLA_PUT_U8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up);

	genlmsg_end(msg, hdr);

	genlmsg_multicast(msg, 0, nfc_genl_event_mcgrp.id, GFP_KERNEL);

	return 0;

nla_put_failure:
	genlmsg_cancel(msg, hdr);
free_msg:
	nlmsg_free(msg);
	return -EMSGSIZE;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:31，代码来源:netlink.c

示例14: ieee802154_nl_assoc_indic

int ieee802154_nl_assoc_indic(struct net_device *dev,
		struct ieee802154_addr *addr, u8 cap)
{
	struct sk_buff *msg;

	pr_debug("%s\n", __func__);

	if (addr->addr_type != IEEE802154_ADDR_LONG) {
		pr_err("%s: received non-long source address!\n", __func__);
		return -EINVAL;
	}

	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_INDIC);
	if (!msg)
		return -ENOBUFS;

	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
			dev->dev_addr);

	NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
			addr->hwaddr);

	NLA_PUT_U8(msg, IEEE802154_ATTR_CAPABILITY, cap);

	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);

nla_put_failure:
	nlmsg_free(msg);
	return -ENOBUFS;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:32，代码来源:nl-mac.c

示例15: ieee802154_nl_assoc_confirm

int ieee802154_nl_assoc_confirm(struct net_device *dev, u16 short_addr,
		u8 status)
{
	struct sk_buff *msg;

	pr_debug("%s\n", __func__);

	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_CONF);
	if (!msg)
		return -ENOBUFS;

	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
			dev->dev_addr);

	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR, short_addr);
	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);

	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);

nla_put_failure:
	nlmsg_free(msg);
	return -ENOBUFS;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:25，代码来源:nl-mac.c

示例16: br_fill_ifinfo

/*
 * Create one netlink message for one interface
 * Contains port and master info as well as carrier and bridge state.
 */
static int br_fill_ifinfo(struct sk_buff *skb, const struct net_bridge_port *port,
			  u32 pid, u32 seq, int event, unsigned int flags)
{
	const struct net_bridge *br = port->br;
	const struct net_device *dev = port->dev;
	struct ifinfomsg *hdr;
	struct nlmsghdr *nlh;
	u8 operstate = netif_running(dev) ? dev->operstate : IF_OPER_DOWN;

	br_debug(br, "br_fill_info event %d port %s master %s\n",
		     event, dev->name, br->dev->name);

	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*hdr), flags);
	if (nlh == NULL)
		return -EMSGSIZE;

	hdr = nlmsg_data(nlh);
	hdr->ifi_family = AF_BRIDGE;
	hdr->__ifi_pad = 0;
	hdr->ifi_type = dev->type;
	hdr->ifi_index = dev->ifindex;
	hdr->ifi_flags = dev_get_flags(dev);
	hdr->ifi_change = 0;

	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
	NLA_PUT_U32(skb, IFLA_MASTER, br->dev->ifindex);
	NLA_PUT_U32(skb, IFLA_MTU, dev->mtu);
	NLA_PUT_U8(skb, IFLA_OPERSTATE, operstate);

	if (dev->addr_len)
		NLA_PUT(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr);

	if (dev->ifindex != dev->iflink)
		NLA_PUT_U32(skb, IFLA_LINK, dev->iflink);

	if (event == RTM_NEWLINK)
		NLA_PUT_U8(skb, IFLA_PROTINFO, port->state);

	return nlmsg_end(skb, nlh);

nla_put_failure:
	nlmsg_cancel(skb, nlh);
	return -EMSGSIZE;
}

开发者ID:develersrl，项目名称:winmate-kernel，代码行数:48，代码来源:br_netlink.c

示例17: hash_net4_data_list

static bool
hash_net4_data_list(struct sk_buff *skb, const struct hash_net4_elem *data)
{
	NLA_PUT_IPADDR4(skb, IPSET_ATTR_IP, data->ip);
	NLA_PUT_U8(skb, IPSET_ATTR_CIDR, data->cidr);
	return 0;

nla_put_failure:
	return 1;
}

开发者ID:daveti，项目名称:prov-kernel，代码行数:10，代码来源:ip_set_hash_net.c

示例18: ieee802154_nl_fill_phy

static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 pid,
	u32 seq, int flags, struct wpan_phy *phy)
{
	void *hdr;
	int i, pages = 0;
	uint32_t *buf = kzalloc(32 * sizeof(uint32_t), GFP_KERNEL);

	pr_debug("%s\n", __func__);

	if (!buf)
		return -EMSGSIZE;

	hdr = genlmsg_put(msg, 0, seq, &nl802154_family, flags,
		IEEE802154_LIST_PHY);
	if (!hdr)
		goto out;

	mutex_lock(&phy->pib_lock);
	NLA_PUT_STRING(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy));

	NLA_PUT_U8(msg, IEEE802154_ATTR_PAGE, phy->current_page);
	NLA_PUT_U8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel);
	for (i = 0; i < 32; i++) {
		if (phy->channels_supported[i])
			buf[pages++] = phy->channels_supported[i] | (i << 27);
	}
	if (pages)
		NLA_PUT(msg, IEEE802154_ATTR_CHANNEL_PAGE_LIST,
				pages * sizeof(uint32_t), buf);

	mutex_unlock(&phy->pib_lock);
	kfree(buf);
	return genlmsg_end(msg, hdr);

nla_put_failure:
	mutex_unlock(&phy->pib_lock);
	genlmsg_cancel(msg, hdr);
out:
	kfree(buf);
	return -EMSGSIZE;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:41，代码来源:nl-phy.c

示例19: hash_ipport4_data_list

static bool
hash_ipport4_data_list(struct sk_buff *skb,
		       const struct hash_ipport4_elem *data)
{
	NLA_PUT_IPADDR4(skb, IPSET_ATTR_IP, data->ip);
	NLA_PUT_NET16(skb, IPSET_ATTR_PORT, data->port);
	NLA_PUT_U8(skb, IPSET_ATTR_PROTO, data->proto);
	return 0;

nla_put_failure:
	return 1;
}

开发者ID:1yankeedt，项目名称:D710BST_FL24_Kernel，代码行数:12，代码来源:ip_set_hash_ipport.c

示例20: inet6_fill_af

static int inet6_fill_af(struct rtnl_link *link, struct nl_msg *msg, void *data)
{
	struct inet6_data *id = data;

	if (id->i6_addr_gen_mode != I6_ADDR_GEN_MODE_UNKNOWN)
		NLA_PUT_U8(msg, IFLA_INET6_ADDR_GEN_MODE, id->i6_addr_gen_mode);

	return 0;

nla_put_failure:
	return -NLE_MSGSIZE;
}

开发者ID:Domikk，项目名称:libnl，代码行数:12，代码来源:inet6.c

注：本文中的NLA_PUT_U8函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NLMSG_DATA函数代码示例发布时间：2022-05-30

C++ NLA_PUT_U32函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8649|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ NLA_PUT_U8函数代码示例

示例1: ieee802154_nl_scan_confirm

示例2: __near_netlink_dep_link_up

示例3: l2tp_nl_session_send

示例4: l2tp_nl_tunnel_send

示例5: scan_request

示例6: icmpv6_tuple_to_nlattr

示例7: parse_4addr_flag

示例8: join_mesh

示例9: plt_get_rx_statcs

示例10: nfc_genl_send_target

示例11: ieee802154_nl_disassoc_indic

示例12: nfc_genl_send_device

示例13: nfc_genl_device_added

示例14: ieee802154_nl_assoc_indic

示例15: ieee802154_nl_assoc_confirm

示例16: br_fill_ifinfo

示例17: hash_net4_data_list

示例18: ieee802154_nl_fill_phy

示例19: hash_ipport4_data_list

示例20: inet6_fill_af

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

CVE-2022-1479

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053