• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ NG_HOOK_NODE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NG_HOOK_NODE函数的典型用法代码示例。如果您正苦于以下问题:C++ NG_HOOK_NODE函数的具体用法?C++ NG_HOOK_NODE怎么用?C++ NG_HOOK_NODE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NG_HOOK_NODE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ngipi_disconnect

/*
 * Hook disconnection
 */
static int
ngipi_disconnect(hook_p hook)
{
	if (NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
		ng_rmnode_self(NG_HOOK_NODE(hook));
	return (0);
}
开发者ID:DangerDexter,项目名称:FreeBSD-8.0-dyntick,代码行数:10,代码来源:ng_ip_input.c


示例2: text_status

/*
 * CONTROL MESSAGES
 */
static int
text_status(node_p node, struct priv *priv, char *arg, u_int len)
{
	struct sbuf sbuf;

	sbuf_new(&sbuf, arg, len, 0);

	if (priv->upper)
		sbuf_printf(&sbuf, "upper hook: %s connected to %s:%s\n",
		    NG_HOOK_NAME(priv->upper),
		    NG_NODE_NAME(NG_HOOK_NODE(NG_HOOK_PEER(priv->upper))),
		    NG_HOOK_NAME(NG_HOOK_PEER(priv->upper)));
	else
		sbuf_printf(&sbuf, "upper hook: <not connected>\n");

	if (priv->lower)
		sbuf_printf(&sbuf, "lower hook: %s connected to %s:%s\n",
		    NG_HOOK_NAME(priv->lower),
		    NG_NODE_NAME(NG_HOOK_NODE(NG_HOOK_PEER(priv->lower))),
		    NG_HOOK_NAME(NG_HOOK_PEER(priv->lower)));
	else
		sbuf_printf(&sbuf, "lower hook: <not connected>\n");

	sbuf_printf(&sbuf, "sscf state: %s\n",
	    priv->enabled == NULL ? "<disabled>" :
	    sscfu_statename(sscfu_getstate(priv->sscf)));

	sbuf_finish(&sbuf);
	return (sbuf_len(&sbuf));
}
开发者ID:MarginC,项目名称:kame,代码行数:33,代码来源:ng_sscfu.c


示例3: ngee_disconnect

/*
 * Removal of the last link destroys the nodeo
 */
static int
ngee_disconnect(hook_p hook)
{
	if ((NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
	&& (NG_NODE_IS_VALID(NG_HOOK_NODE(hook)))) {
		ng_rmnode_self(NG_HOOK_NODE(hook));
	}
	return (0);
}
开发者ID:edgar-pek,项目名称:PerspicuOS,代码行数:12,代码来源:ng_ether_echo.c


示例4: ng_ksocket_disconnect

/*
 * Hook disconnection
 */
static int
ng_ksocket_disconnect(hook_p hook)
{
	KASSERT(NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0,
	    ("%s: numhooks=%d?", __func__,
	    NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook))));
	if (NG_NODE_IS_VALID(NG_HOOK_NODE(hook)))
		ng_rmnode_self(NG_HOOK_NODE(hook));
	return (0);
}
开发者ID:juanfra684,项目名称:DragonFlyBSD,代码行数:13,代码来源:ng_ksocket.c


示例5: ng_udbp_disconnect

/*
 * Dook disconnection
 *
 * For this type, removal of the last link destroys the node
 */
Static int
ng_udbp_disconnect(hook_p hook)
{
	const udbp_p sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
	sc->hook = NULL;

	if ((NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
	&& (NG_NODE_IS_VALID(NG_HOOK_NODE(hook))))
		ng_rmnode_self(NG_HOOK_NODE(hook));
	return (0);
}
开发者ID:MarginC,项目名称:kame,代码行数:16,代码来源:udbp.c


示例6: ngt_disconnect

/*
 * Hook disconnection
 */
static int
ngt_disconnect(hook_p hook)
{
	struct hookinfo *const hinfo = NG_HOOK_PRIVATE(hook);

	KASSERT(hinfo != NULL, ("%s: null info", __func__));
	hinfo->hook = NULL;
	if ((NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
	&& (NG_NODE_IS_VALID(NG_HOOK_NODE(hook))))
		ng_rmnode_self(NG_HOOK_NODE(hook));
	return (0);
}
开发者ID:MarginC,项目名称:kame,代码行数:15,代码来源:ng_tee.c


示例7: ng_split_disconnect

/*
 * Hook disconnection
 */
static int
ng_split_disconnect(hook_p hook)
{
	hook_p		*localhook = NG_HOOK_PRIVATE(hook);
	
	KASSERT(localhook != NULL, ("%s: null info", __func__));
	*localhook = NULL;
	if ((NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
	    && (NG_NODE_IS_VALID(NG_HOOK_NODE(hook)))) {
		ng_rmnode_self(NG_HOOK_NODE(hook));
	}

	return (0);
}
开发者ID:DangerDexter,项目名称:FreeBSD-8.0-dyntick,代码行数:17,代码来源:ng_split.c


示例8: ng_xxx_connect

/*
 * This is called once we've already connected a new hook to the other node.
 * It gives us a chance to balk at the last minute.
 */
static int
ng_xxx_connect(hook_p hook)
{
#if 0
	/*
	 * If we were a driver running at other than splnet then
	 * we should set the QUEUE bit on the edge so that we
	 * will deliver by queing.
	 */
	if /*it is the upstream hook */
	NG_HOOK_FORCE_QUEUE(NG_HOOK_PEER(hook));
#endif
#if 0
	/*
	 * If for some reason we want incoming date to be queued
	 * by the NETISR system and delivered later we can set the same bit on
	 * OUR hook. (maybe to allow unwinding of the stack)
	 */

	if (NG_HOOK_PRIVATE(hook)) {
		int dlci;
		/*
		 * If it's dlci 1023, requeue it so that it's handled
		 * at a lower priority. This is how a node decides to
		 * defer a data message.
		 */
		dlci = ((struct XXX_hookinfo *) NG_HOOK_PRIVATE(hook))->dlci;
		if (dlci == 1023) {
			NG_HOOK_FORCE_QUEUE(hook);
		}
#endif
	/* otherwise be really amiable and just say "YUP that's OK by me! " */
	return (0);
}

/*
 * Hook disconnection
 *
 * For this type, removal of the last link destroys the node
 */
static int
ng_xxx_disconnect(hook_p hook)
{
	if (NG_HOOK_PRIVATE(hook))
		((struct XXX_hookinfo *) (NG_HOOK_PRIVATE(hook)))->hook = NULL;
	if ((NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
	&& (NG_NODE_IS_VALID(NG_HOOK_NODE(hook)))) /* already shutting down? */
		ng_rmnode_self(NG_HOOK_NODE(hook));
	return (0);
}
开发者ID:MattDooner,项目名称:freebsd-west,代码行数:54,代码来源:ng_sample.c


示例9: ng_sscfu_disconnect

static int
ng_sscfu_disconnect(hook_p hook)
{
	node_p node = NG_HOOK_NODE(hook);
	struct priv *priv = NG_NODE_PRIVATE(node);

	if (hook == priv->upper)
		priv->upper = NULL;
	else if (hook == priv->lower)
		priv->lower = NULL;
	else {
		log(LOG_ERR, "bogus hook");
		return (EINVAL);
	}

	if (NG_NODE_NUMHOOKS(node) == 0) {
		if (NG_NODE_IS_VALID(node))
			ng_rmnode_self(node);
	} else {
		/*
		 * Because there are no timeouts reset the protocol
		 * if the lower layer is disconnected.
		 */
		if (priv->lower == NULL &&
		    priv->enabled &&
		    sscfu_getstate(priv->sscf) != SSCFU_RELEASED)
			sscfu_reset(priv->sscf);
	}
	return (0);
}
开发者ID:MarginC,项目名称:kame,代码行数:30,代码来源:ng_sscfu.c


示例10: ng_sscop_disconnect

static int
ng_sscop_disconnect(hook_p hook)
{
	node_p node = NG_HOOK_NODE(hook);
	struct priv *priv = NG_NODE_PRIVATE(node);

	if(hook == priv->upper)
		priv->upper = NULL;
	else if(hook == priv->lower)
		priv->lower = NULL;
	else if(hook == priv->manage)
		priv->manage = NULL;

	if(NG_NODE_NUMHOOKS(node) == 0) {
		if(NG_NODE_IS_VALID(node))
			ng_rmnode_self(node);
	} else {
		/*
		 * Imply a release request, if the upper layer is
		 * disconnected.
		 */
		if(priv->upper == NULL && priv->lower != NULL &&
		   priv->enabled &&
		   sscop_getstate(priv->sscop) != SSCOP_IDLE) {
			sscop_aasig(priv->sscop, SSCOP_RELEASE_request,
			    NULL, 0);
		}
	}
	return 0;
}
开发者ID:MarginC,项目名称:kame,代码行数:30,代码来源:ng_sscop.c


示例11: ng_ubt_disconnect

static int
ng_ubt_disconnect(hook_p hook)
{
	struct ubt_softc	*sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));

	UBT_NG_LOCK(sc);

	if (hook != sc->sc_hook) {
		UBT_NG_UNLOCK(sc);

		return (EINVAL);
	}

	sc->sc_hook = NULL;

	/* Kick off task to stop all USB xfers */
	ubt_task_schedule(sc, UBT_FLAG_T_STOP_ALL);

	/* Drain queues */
	NG_BT_MBUFQ_DRAIN(&sc->sc_cmdq);
	NG_BT_MBUFQ_DRAIN(&sc->sc_aclq);
	NG_BT_MBUFQ_DRAIN(&sc->sc_scoq);

	UBT_NG_UNLOCK(sc);

	return (0);
} /* ng_ubt_disconnect */
开发者ID:2asoft,项目名称:freebsd,代码行数:27,代码来源:ng_ubt.c


示例12: ng_sscfu_rcvlower

static int
ng_sscfu_rcvlower(hook_p hook, item_p item)
{
	node_p node = NG_HOOK_NODE(hook);
	struct priv *priv = NG_NODE_PRIVATE(node);
	struct mbuf *m;
	struct sscop_arg a;

	if (!priv->enabled || priv->upper == NULL) {
		NG_FREE_ITEM(item);
		return (0);
	}

	NGI_GET_M(item, m);
	NG_FREE_ITEM(item);

	if (!(m->m_flags & M_PKTHDR)) {
		printf("no pkthdr\n");
		m_freem(m);
		return (EINVAL);
	}

	/*
	 * Strip of the SSCOP header.
	 */
	if (m->m_len < (int)sizeof(a) && (m = m_pullup(m, sizeof(a))) == NULL)
		return (ENOMEM);
	bcopy((caddr_t)mtod(m, struct sscop_arg *), &a, sizeof(a));
	m_adj(m, sizeof(a));

	sscfu_input(priv->sscf, a.sig, m, a.arg);

	return (0);
}
开发者ID:MarginC,项目名称:kame,代码行数:34,代码来源:ng_sscfu.c


示例13: ng_sscop_rcvlower

/*
 * DATA
 */
static int
ng_sscop_rcvlower(hook_p hook, item_p item)
{
	struct priv *priv = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
	struct mbuf *m;

	if (!priv->enabled) {
		NG_FREE_ITEM(item);
		return EINVAL;
	}

	/*
	 * If we are disconnected at the upper layer and in the IDLE
	 * state, drop any incoming packet.
	 */
	if (priv->upper != NULL || sscop_getstate(priv->sscop) != SSCOP_IDLE) {
		NGI_GET_M(item, m);
		priv->stats.in_packets++;
		sscop_input(priv->sscop, m);
	} else {
		priv->stats.in_dropped++;
	}
	NG_FREE_ITEM(item);

	return (0);
}
开发者ID:MarginC,项目名称:kame,代码行数:29,代码来源:ng_sscop.c


示例14: ng_ksocket_rcvdata

/*
 * Receive incoming data on our hook.  Send it out the socket.
 */
static int
ng_ksocket_rcvdata(hook_p hook, item_p item)
{
	struct thread *td = curthread;	/* XXX broken */
	const node_p node = NG_HOOK_NODE(hook);
	const priv_p priv = NG_NODE_PRIVATE(node);
	struct socket *const so = priv->so;
	struct sockaddr *sa = NULL;
	int error;
	struct mbuf *m;
	struct sa_tag *stag;

	/* Extract data */
	NGI_GET_M(item, m);
	NG_FREE_ITEM(item);

	/*
	 * Look if socket address is stored in packet tags.
	 * If sockaddr is ours, or provided by a third party (zero id),
	 * then we accept it.
	 */
	if (((stag = (struct sa_tag *)m_tag_locate(m, NGM_KSOCKET_COOKIE,
	    NG_KSOCKET_TAG_SOCKADDR, NULL)) != NULL) &&
	    (stag->id == NG_NODE_ID(node) || stag->id == 0))
		sa = &stag->sa;

	/* Reset specific mbuf flags to prevent addressing problems. */
	m->m_flags &= ~(M_BCAST|M_MCAST);

	/* Send packet */
	error = sosend(so, sa, 0, m, 0, 0, td);

	return (error);
}
开发者ID:juanfra684,项目名称:DragonFlyBSD,代码行数:37,代码来源:ng_ksocket.c


示例15: ng_sscop_rcvupper

static int
ng_sscop_rcvupper(hook_p hook, item_p item)
{
	struct priv *priv = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
	struct sscop_arg a;
	struct mbuf *m;

	if (!priv->enabled) {
		NG_FREE_ITEM(item);
		return (EINVAL);
	}

	/*
	 * If the lower layer is not connected allow to proceed.
	 * The lower layer sending function will drop outgoing frames,
	 * and the sscop will timeout any establish requests.
	 */
	NGI_GET_M(item, m);
	NG_FREE_ITEM(item);

	if (!(m->m_flags & M_PKTHDR)) {
		printf("no pkthdr\n");
		m_freem(m);
		return (EINVAL);
	}
	if (m->m_len < (int)sizeof(a) && (m = m_pullup(m, sizeof(a))) == NULL)
		return (ENOBUFS);
	bcopy((caddr_t)mtod(m, struct sscop_arg *), &a, sizeof(a));
	m_adj(m, sizeof(a));

	return (sscop_aasig(priv->sscop, a.sig, m, a.arg));
}
开发者ID:MarginC,项目名称:kame,代码行数:32,代码来源:ng_sscop.c


示例16: ng_xxx_rcvdata

/*
 * Receive data, and do something with it.
 * Actually we receive a queue item which holds the data.
 * If we free the item it will also free the data unless we have
 * previously disassociated it using the NGI_GET_M() macro.
 * Possibly send it out on another link after processing.
 * Possibly do something different if it comes from different
 * hooks. The caller will never free m, so if we use up this data or
 * abort we must free it.
 *
 * If we want, we may decide to force this data to be queued and reprocessed
 * at the netgraph NETISR time.
 * We would do that by setting the HK_QUEUE flag on our hook. We would do that
 * in the connect() method.
 */
static int
ng_xxx_rcvdata(hook_p hook, item_p item )
{
	const xxx_p xxxp = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
	int chan = -2;
	int dlci = -2;
	int error;
	struct mbuf *m;

	NGI_GET_M(item, m);
	if (NG_HOOK_PRIVATE(hook)) {
		dlci = ((struct XXX_hookinfo *) NG_HOOK_PRIVATE(hook))->dlci;
		chan = ((struct XXX_hookinfo *) NG_HOOK_PRIVATE(hook))->channel;
		if (dlci != -1) {
			/* If received on a DLCI hook process for this
			 * channel and pass it to the downstream module.
			 * Normally one would add a multiplexing header at
			 * the front here */
			/* M_PREPEND(....)	; */
			/* mtod(m, xxxxxx)->dlci = dlci; */
			NG_FWD_NEW_DATA(error, item,
				xxxp->downstream_hook.hook, m);
			xxxp->packets_out++;
		} else {
			/* data came from the multiplexed link */
			dlci = 1;	/* get dlci from header */
			/* madjust(....) *//* chop off header */
			for (chan = 0; chan < XXX_NUM_DLCIS; chan++)
				if (xxxp->channel[chan].dlci == dlci)
					break;
			if (chan == XXX_NUM_DLCIS) {
				NG_FREE_ITEM(item);
				NG_FREE_M(m);
				return (ENETUNREACH);
			}
			/* If we were called at splnet, use the following:
			 * NG_SEND_DATA_ONLY(error, otherhook, m); if this
			 * node is running at some SPL other than SPLNET
			 * then you should use instead: error =
			 * ng_queueit(otherhook, m, NULL); m = NULL;
			 * This queues the data using the standard NETISR
			 * system and schedules the data to be picked
			 * up again once the system has moved to SPLNET and
			 * the processing of the data can continue. After
			 * these are run 'm' should be considered
			 * as invalid and NG_SEND_DATA actually zaps them. */
			NG_FWD_NEW_DATA(error, item,
				xxxp->channel[chan].hook, m);
			xxxp->packets_in++;
		}
	} else {
		/* It's the debug hook, throw it away.. */
		if (hook == xxxp->downstream_hook.hook) {
			NG_FREE_ITEM(item);
			NG_FREE_M(m);
		}
	}
	return 0;
}
开发者ID:MattDooner,项目名称:freebsd-west,代码行数:74,代码来源:ng_sample.c


示例17: ng_ksocket_connect

static int
ng_ksocket_connect(hook_p hook)
{
	node_p node = NG_HOOK_NODE(hook);
	const priv_p priv = NG_NODE_PRIVATE(node);
	struct socket *const so = priv->so;

	/* Add our hook for incoming data and other events */
	priv->so->so_upcallarg = (caddr_t)node;
	priv->so->so_upcall = ng_ksocket_incoming;
	SOCKBUF_LOCK(&priv->so->so_rcv);
	priv->so->so_rcv.sb_flags |= SB_UPCALL;
	SOCKBUF_UNLOCK(&priv->so->so_rcv);
	SOCKBUF_LOCK(&priv->so->so_snd);
	priv->so->so_snd.sb_flags |= SB_UPCALL;
	SOCKBUF_UNLOCK(&priv->so->so_snd);
	SOCK_LOCK(priv->so);
	sosetstate(priv->so, SS_NBIO);
	SOCK_UNLOCK(priv->so);
	/*
	 * --Original comment--
	 * On a cloned socket we may have already received one or more
	 * upcalls which we couldn't handle without a hook.  Handle
	 * those now.
	 * We cannot call the upcall function directly
	 * from here, because until this function has returned our
	 * hook isn't connected.
	 *
	 * ---meta comment for -current ---
	 * XXX This is dubius.
	 * Upcalls between the time that the hook was
	 * first created and now (on another processesor) will
	 * be earlier on the queue than the request to finalise the hook.
	 * By the time the hook is finalised,
	 * The queued upcalls will have happenned and the code
	 * will have discarded them because of a lack of a hook.
	 * (socket not open).
	 *
	 * This is a bad byproduct of the complicated way in which hooks
	 * are now created (3 daisy chained async events).
	 *
	 * Since we are a netgraph operation 
	 * We know that we hold a lock on this node. This forces the
	 * request we make below to be queued rather than implemented
	 * immediatly which will cause the upcall function to be called a bit
	 * later.
	 * However, as we will run any waiting queued operations immediatly
	 * after doing this one, if we have not finalised the other end
	 * of the hook, those queued operations will fail.
	 */
	if (priv->flags & KSF_CLONED) {
		ng_send_fn(node, NULL, &ng_ksocket_incoming2, so, M_WAITOK | M_NULLOK);
	}

	return (0);
}
开发者ID:juanfra684,项目名称:DragonFlyBSD,代码行数:56,代码来源:ng_ksocket.c


示例18: ngfrm_disconnect

/*
 * Hook disconnection
 *
 * Invalidate the private data associated with this dlci.
 * For this type, removal of the last link resets tries to destroy the node.
 */
static int
ngfrm_disconnect(hook_p hook)
{
	const sc_p sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
	struct ctxinfo *const cp = NG_HOOK_PRIVATE(hook);
	int dlci;

	/* If it's a regular dlci hook, then free resources etc.. */
	if (cp != NULL) {
		cp->hook = NULL;
		dlci = cp->dlci;
		if (dlci != -1)
			sc->ALT[dlci] = 0;
		cp->flags = 0;
		sc->datahooks--;
	}
	if ((NG_NODE_NUMHOOKS(NG_HOOK_NODE(hook)) == 0)
	&& (NG_NODE_IS_VALID(NG_HOOK_NODE(hook))))
		ng_rmnode_self(NG_HOOK_NODE(hook));
	return (0);
}
开发者ID:MarginC,项目名称:kame,代码行数:27,代码来源:ng_frame_relay.c


示例19: ng_ubt_connect

static int
ng_ubt_connect(hook_p hook)
{
	struct ubt_softc	*sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));

	NG_HOOK_FORCE_QUEUE(NG_HOOK_PEER(hook));

	UBT_NG_LOCK(sc);
	ubt_task_schedule(sc, UBT_FLAG_T_START_ALL);
	UBT_NG_UNLOCK(sc);

	return (0);
} /* ng_ubt_connect */
开发者ID:2asoft,项目名称:freebsd,代码行数:13,代码来源:ng_ubt.c


示例20: ngs_connect

/*
 * If only one hook, allow read(2) and write(2) to work.
 */
static int
ngs_connect(hook_p hook)
{
	node_p node = NG_HOOK_NODE(hook);
	struct ngsock *priv = NG_NODE_PRIVATE(node);

	if ((priv->datasock) && (priv->datasock->ng_socket)) {
		if (NG_NODE_NUMHOOKS(node) == 1)
			sosetstate(priv->datasock->ng_socket, SS_ISCONNECTED);
		else
			soclrstate(priv->datasock->ng_socket, SS_ISCONNECTED);
	}
	return (0);
}
开发者ID:wan721,项目名称:DragonFlyBSD,代码行数:17,代码来源:ng_socket.c



注:本文中的NG_HOOK_NODE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ NG_MKMESSAGE函数代码示例发布时间:2022-05-30
下一篇:
C++ NG_FREE_M函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap