C++ NCONF_new函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NCONF_new函数的典型用法代码示例。如果您正苦于以下问题：C++ NCONF_new函数的具体用法？C++ NCONF_new怎么用？C++ NCONF_new使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NCONF_new函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ossl_config_s_alloc

static VALUE
ossl_config_s_alloc(VALUE klass)
{
    CONF *conf;
    VALUE obj;

    if(!(conf = NCONF_new(NULL)))
	ossl_raise(eConfigError, NULL);
    WrapConfig(klass, obj, conf);

    return obj;
}

开发者ID:AdamDotCom，项目名称:my-rvm，代码行数:12，代码来源:ossl_config.c

示例2: FuzzerTestOneInput

int FuzzerTestOneInput(const uint8_t *buf, size_t len) {
    CONF *conf = NCONF_new(NULL);
    BIO *in = BIO_new(BIO_s_mem());
    long eline;

    OPENSSL_assert((size_t)BIO_write(in, buf, len) == len);
    NCONF_load_bio(conf, in, &eline);
    //NCONF_dump_fp(conf, stdout);
    NCONF_free(conf);
    BIO_free(in);

    return 0;
}

开发者ID:1234-，项目名称:openssl，代码行数:13，代码来源:conf.c

示例3: LoadOpenSSLConf

static CONF *
LoadOpenSSLConf(const gchar *fname)              // IN
{
   CONF *config;
   const char *mask;
   gboolean ret = FALSE;
   gchar *err = NULL;

   config = NCONF_new(NULL);
   if (!config) {
      Error("Failed to allocate the OpenSSL config.\n");
      goto exit;
   }

   if (!NCONF_load(config, fname, NULL)) {
      Error("Failed to load the configuration file %s: %s.\n",
            fname, GetSSLError(&err));
      goto exit;
   }

   OPENSSL_load_builtin_modules();

   if (!CONF_modules_load(config, NULL, 0)) {
      Error("Error configuring OpenSSL modules: %s.\n",
            GetSSLError(&err));
      goto exit;
   }

   mask = NCONF_get_string(config, "req", "string_mask");
   if (mask) {
      ASN1_STRING_set_default_mask_asc(mask);
   }

   ret = TRUE;

exit:
   if (!ret) {
      NCONF_free(config);
      config = NULL;
   }
   g_free(err);

   return config;
}

开发者ID:AlissonGiron，项目名称:open-vm-tools，代码行数:44，代码来源:cert_key.c

示例4: main

int main(int argc, char **argv)
{
    int result = 0;
    long num_tests;

    if (argc != 2)
        return 1;

    conf = NCONF_new(NULL);
    OPENSSL_assert(conf != NULL);

    /* argv[1] should point to the test conf file */
    OPENSSL_assert(NCONF_load(conf, argv[1], NULL) > 0);

    OPENSSL_assert(NCONF_get_number_e(conf, NULL, "num_tests", &num_tests));

    ADD_ALL_TESTS(test_handshake, (int)(num_tests));
    result = run_tests(argv[0]);

    return result;
}

开发者ID:Bloody99，项目名称:openssl，代码行数:21，代码来源:ssl_test.c

示例5: test_main

int test_main(int argc, char **argv)
{
    int result = 0;

    if (argc != 2) {
        TEST_info("Missing file argument");
        goto end;
    }
    if (!TEST_ptr(conf = NCONF_new(NULL))
            /* argv[1] should point to test/ssl_test_ctx_test.conf */
            || !TEST_int_gt(NCONF_load(conf, argv[1], NULL), 0))
        goto end;

    ADD_TEST(test_empty_configuration);
    ADD_TEST(test_good_configuration);
    ADD_ALL_TESTS(test_bad_configuration, OSSL_NELEM(bad_configurations));
    result = run_tests(argv[0]);

end:
    NCONF_free(conf);
    return result;
}

开发者ID:dgervais，项目名称:openssl，代码行数:22，代码来源:ssl_test_ctx_test.c

示例6: test_main

int test_main(int argc, char **argv)
{
    int result = 0;

    if (argc != 2)
        return 1;

    conf = NCONF_new(NULL);
    TEST_check(conf != NULL);

    /* argv[1] should point to test/ssl_test_ctx_test.conf */
    TEST_check(NCONF_load(conf, argv[1], NULL) > 0);

    ADD_TEST(test_empty_configuration);
    ADD_TEST(test_good_configuration);
    ADD_ALL_TESTS(test_bad_configuration, OSSL_NELEM(bad_configurations));

    result = run_tests(argv[0]);

    NCONF_free(conf);

    return result;
}

开发者ID:Castaglia，项目名称:openssl，代码行数:23，代码来源:ssl_test_ctx_test.c

示例7: main

int
main(int argc, char **argv)
{
	ARGS arg;
#define PROG_NAME_SIZE	39
	char pname[PROG_NAME_SIZE + 1];
	FUNCTION f, *fp;
	const char *prompt;
	char buf[1024];
	char *to_free = NULL;
	int n, i, ret = 0;
	char *p;
	LHASH_OF(FUNCTION) * prog = NULL;
	long errline;

	arg.data = NULL;
	arg.count = 0;

	if (pledge("stdio cpath wpath rpath inet dns proc flock tty", NULL) == -1) {
		fprintf(stderr, "openssl: pledge: %s\n", strerror(errno));
		exit(1);
	}

	bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
	if (bio_err == NULL) {
		fprintf(stderr, "openssl: failed to initialise bio_err\n");
		exit(1);
	}

	if (BIO_sock_init() != 1) {
		BIO_printf(bio_err, "BIO_sock_init failed\n");
		exit(1);
	}

	CRYPTO_set_locking_callback(lock_dbg_cb);

	openssl_startup();

	/* Lets load up our environment a little */
	p = getenv("OPENSSL_CONF");
	if (p == NULL) {
		p = to_free = make_config_name();
		if (p == NULL) {
			BIO_printf(bio_err, "error making config file name\n");
			goto end;
		}
	}

	default_config_file = p;

	config = NCONF_new(NULL);
	i = NCONF_load(config, p, &errline);
	if (i == 0) {
		if (ERR_GET_REASON(ERR_peek_last_error()) ==
		    CONF_R_NO_SUCH_FILE) {
			BIO_printf(bio_err,
			    "WARNING: can't open config file: %s\n", p);
			ERR_clear_error();
			NCONF_free(config);
			config = NULL;
		} else {
			ERR_print_errors(bio_err);
			NCONF_free(config);
			exit(1);
		}
	}

	if (!load_config(bio_err, NULL)) {
		BIO_printf(bio_err, "failed to load configuration\n");
		goto end;
	}

	prog = prog_init();

	/* first check the program name */
	program_name(argv[0], pname, sizeof pname);

	f.name = pname;
	fp = lh_FUNCTION_retrieve(prog, &f);
	if (fp != NULL) {
		argv[0] = pname;

		single_execution = 1;
		ret = fp->func(argc, argv);
		goto end;
	}
	/*
	 * ok, now check that there are not arguments, if there are, run with
	 * them, shifting the ssleay off the front
	 */
	if (argc != 1) {
		argc--;
		argv++;

		single_execution = 1;
		ret = do_cmd(prog, argc, argv);
		if (ret < 0)
			ret = 0;
		goto end;
	}
//.........这里部分代码省略.........

开发者ID:2trill2spill，项目名称:nextgen，代码行数:101，代码来源:openssl.c

示例8: main

int main(int argc, char **argv)
{
    BIO *sbio = NULL, *out = NULL;
    int i, len, rv;
    char tmpbuf[1024];
    SSL_CTX *ctx = NULL;
    SSL_CONF_CTX *cctx = NULL;
    SSL *ssl = NULL;
    CONF *conf = NULL;
    STACK_OF(CONF_VALUE) *sect = NULL;
    CONF_VALUE *cnf;
    const char *connect_str = "localhost:4433";
    long errline = -1;

    ERR_load_crypto_strings();
    ERR_load_SSL_strings();
    SSL_library_init();

    conf = NCONF_new(NULL);

    if (NCONF_load(conf, "connect.cnf", &errline) <= 0) {
        if (errline <= 0)
            fprintf(stderr, "Error processing config file\n");
        else
            fprintf(stderr, "Error on line %ld\n", errline);
        goto end;
    }

    sect = NCONF_get_section(conf, "default");

    if (sect == NULL) {
        fprintf(stderr, "Error retrieving default section\n");
        goto end;
    }

    ctx = SSL_CTX_new(SSLv3_client_method());
    cctx = SSL_CONF_CTX_new();
    SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_CLIENT);
    SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_FILE);
    SSL_CONF_CTX_set_ssl_ctx(cctx, ctx);
    for (i = 0; i < sk_CONF_VALUE_num(sect); i++) {
        cnf = sk_CONF_VALUE_value(sect, i);
        rv = SSL_CONF_cmd(cctx, cnf->name, cnf->value);
        if (rv > 0)
            continue;
        if (rv != -2) {
            fprintf(stderr, "Error processing %s = %s\n",
                    cnf->name, cnf->value);
            ERR_print_errors_fp(stderr);
            goto end;
        }
        if (!strcmp(cnf->name, "Connect")) {
            connect_str = cnf->value;
        } else {
            fprintf(stderr, "Unknown configuration option %s\n", cnf->name);
            goto end;
        }
    }

    if (!SSL_CONF_CTX_finish(cctx)) {
        fprintf(stderr, "Finish error\n");
        ERR_print_errors_fp(stderr);
        goto err;
    }

    /*
     * We'd normally set some stuff like the verify paths and * mode here
     * because as things stand this will connect to * any server whose
     * certificate is signed by any CA.
     */

    sbio = BIO_new_ssl_connect(ctx);

    BIO_get_ssl(sbio, &ssl);

    if (!ssl) {
        fprintf(stderr, "Can't locate SSL pointer\n");
        goto end;
    }

    /* Don't want any retries */
    SSL_set_mode(ssl, SSL_MODE_AUTO_RETRY);

    /* We might want to do other things with ssl here */

    BIO_set_conn_hostname(sbio, connect_str);

    out = BIO_new_fp(stdout, BIO_NOCLOSE);
    if (BIO_do_connect(sbio) <= 0) {
        fprintf(stderr, "Error connecting to server\n");
        ERR_print_errors_fp(stderr);
        goto end;
    }

    if (BIO_do_handshake(sbio) <= 0) {
        fprintf(stderr, "Error establishing SSL connection\n");
        ERR_print_errors_fp(stderr);
        goto end;
    }

//.........这里部分代码省略.........

开发者ID:thatking，项目名称:liteos_3516c，代码行数:101，代码来源:client-conf.c

示例9: srp_main


//.........这里部分代码省略.........
        goto opthelp;
    }

    if (!app_passwd(passinarg, passoutarg, &passin, &passout)) {
        BIO_printf(bio_err, "Error getting passwords\n");
        goto end;
    }

    if (!dbfile) {

        /*****************************************************************/
        tofree = NULL;
        if (configfile == NULL)
            configfile = getenv("OPENSSL_CONF");
        if (configfile == NULL)
            configfile = getenv("SSLEAY_CONF");
        if (configfile == NULL) {
            const char *s = X509_get_default_cert_area();
            size_t len = strlen(s) + 1 + sizeof(CONFIG_FILE);

            tofree = app_malloc(len, "config filename space");
# ifdef OPENSSL_SYS_VMS
            strcpy(tofree, s);
# else
            BUF_strlcpy(tofree, s, len);
            BUF_strlcat(tofree, "/", len);
# endif
            BUF_strlcat(tofree, CONFIG_FILE, len);
            configfile = tofree;
        }

        if (verbose)
            BIO_printf(bio_err, "Using configuration from %s\n", configfile);
        conf = NCONF_new(NULL);
        if (NCONF_load(conf, configfile, &errorline) <= 0) {
            if (errorline <= 0)
                BIO_printf(bio_err, "error loading the config file '%s'\n",
                           configfile);
            else
                BIO_printf(bio_err, "error on line %ld of config file '%s'\n",
                           errorline, configfile);
            goto end;
        }
        OPENSSL_free(tofree);
        tofree = NULL;

        /* Lets get the config section we are using */
        if (section == NULL) {
            if (verbose)
                BIO_printf(bio_err,
                           "trying to read " ENV_DEFAULT_SRP
                           " in \" BASE_SECTION \"\n");

            section = NCONF_get_string(conf, BASE_SECTION, ENV_DEFAULT_SRP);
            if (section == NULL) {
                lookup_fail(BASE_SECTION, ENV_DEFAULT_SRP);
                goto end;
            }
        }

        if (randfile == NULL && conf)
            randfile = NCONF_get_string(conf, BASE_SECTION, "RANDFILE");

        if (verbose)
            BIO_printf(bio_err,
                       "trying to read " ENV_DATABASE " in section \"%s\"\n",

开发者ID:Chatlanen，项目名称:openssl，代码行数:67，代码来源:srp.c

示例10: main

int main(int argc, char *argv[])
{
    char *port = "*:4433";
    BIO *in = NULL;
    BIO *ssl_bio, *tmp;
    SSL_CTX *ctx;
    SSL_CONF_CTX *cctx = NULL;
    CONF *conf = NULL;
    STACK_OF(CONF_VALUE) *sect = NULL;
    CONF_VALUE *cnf;
    long errline = -1;
    char buf[512];
    int ret = EXIT_FAILURE, i;

    ctx = SSL_CTX_new(TLS_server_method());

    conf = NCONF_new(NULL);

    if (NCONF_load(conf, "accept.cnf", &errline) <= 0) {
        if (errline <= 0)
            fprintf(stderr, "Error processing config file\n");
        else
            fprintf(stderr, "Error on line %ld\n", errline);
        goto err;
    }

    sect = NCONF_get_section(conf, "default");

    if (sect == NULL) {
        fprintf(stderr, "Error retrieving default section\n");
        goto err;
    }

    cctx = SSL_CONF_CTX_new();
    SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_SERVER);
    SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_CERTIFICATE);
    SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_FILE);
    SSL_CONF_CTX_set_ssl_ctx(cctx, ctx);
    for (i = 0; i < sk_CONF_VALUE_num(sect); i++) {
        int rv;
        cnf = sk_CONF_VALUE_value(sect, i);
        rv = SSL_CONF_cmd(cctx, cnf->name, cnf->value);
        if (rv > 0)
            continue;
        if (rv != -2) {
            fprintf(stderr, "Error processing %s = %s\n",
                    cnf->name, cnf->value);
            ERR_print_errors_fp(stderr);
            goto err;
        }
        if (strcmp(cnf->name, "Port") == 0) {
            port = cnf->value;
        } else {
            fprintf(stderr, "Unknown configuration option %s\n", cnf->name);
            goto err;
        }
    }

    if (!SSL_CONF_CTX_finish(cctx)) {
        fprintf(stderr, "Finish error\n");
        ERR_print_errors_fp(stderr);
        goto err;
    }

    /* Setup server side SSL bio */
    ssl_bio = BIO_new_ssl(ctx, 0);

    if ((in = BIO_new_accept(port)) == NULL)
        goto err;

    /*
     * This means that when a new connection is accepted on 'in', The ssl_bio
     * will be 'duplicated' and have the new socket BIO push into it.
     * Basically it means the SSL BIO will be automatically setup
     */
    BIO_set_accept_bios(in, ssl_bio);

 again:
    /*
     * The first call will setup the accept socket, and the second will get a
     * socket.  In this loop, the first actual accept will occur in the
     * BIO_read() function.
     */

    if (BIO_do_accept(in) <= 0)
        goto err;

    for (;;) {
        i = BIO_read(in, buf, 512);
        if (i == 0) {
            /*
             * If we have finished, remove the underlying BIO stack so the
             * next time we call any function for this BIO, it will attempt
             * to do an accept
             */
            printf("Done\n");
            tmp = BIO_pop(in);
            BIO_free_all(tmp);
            goto again;
        }
//.........这里部分代码省略.........

开发者ID:IIJ-NetBSD，项目名称:netbsd-src，代码行数:101，代码来源:server-conf.c

示例11: main


//.........这里部分代码省略.........
    if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
    {
        if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
        {
            CRYPTO_malloc_debug_init();
            CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
        }
        else
        {
            /* OPENSSL_DEBUG_MEMORY=off */
            CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
        }
    }
    CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);

#if 0
    if (getenv("OPENSSL_DEBUG_LOCKING") != NULL)
#endif
    {
        CRYPTO_set_locking_callback(lock_dbg_cb);
    }

    apps_startup();

    /* Lets load up our environment a little */
    p=getenv("OPENSSL_CONF");
    if (p == NULL)
        p=getenv("SSLEAY_CONF");
    if (p == NULL)
        p=to_free=make_config_name();

    default_config_file=p;

    config=NCONF_new(NULL);
    i=NCONF_load(config,p,&errline);
    if (i == 0)
    {
        if (ERR_GET_REASON(ERR_peek_last_error())
                == CONF_R_NO_SUCH_FILE)
        {
            BIO_printf(bio_err,
                       "WARNING: can't open config file: %s\n",p);
            ERR_clear_error();
            NCONF_free(config);
            config = NULL;
        }
        else
        {
            ERR_print_errors(bio_err);
            NCONF_free(config);
            exit(1);
        }
    }

    prog=prog_init();

    /* first check the program name */
    program_name(Argv[0],pname,sizeof pname);

    f.name=pname;
    fp=lh_FUNCTION_retrieve(prog,&f);
    if (fp != NULL)
    {
        Argv[0]=pname;
        ret=fp->func(Argc,Argv);
        goto end;

开发者ID:EricMarquez，项目名称:Musubi-iOS-OSS，代码行数:67，代码来源:openssl.c

示例12: MAIN


//.........这里部分代码省略.........
		if (outfile) out = BIO_new_file(outfile, "w");
		else {
			out = BIO_new_fp(OPENSSL_TYPE__FILE_STDOUT, BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
			{
			    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
			    out = BIO_push(tmpbio, out);
			}
#endif
		}

		if(!out) {
			BIO_printf(bio_err, "Error opening output file\n");
			ERR_print_errors(bio_err);
			goto end;
		}
		BIO_printf(out, "SPKAC=%s\n", spkstr);
		OPENSSL_free(spkstr);
		ret = 0;
		goto end;
	}

	

	if (infile) in = BIO_new_file(infile, "r");
	else in = BIO_new_fp(OPENSSL_TYPE__FILE_STDIN, BIO_NOCLOSE);

	if(!in) {
		BIO_printf(bio_err, "Error opening input file\n");
		ERR_print_errors(bio_err);
		goto end;
	}

	conf = NCONF_new(NULL);
	i = NCONF_load_bio(conf, in, NULL);

	if(!i) {
		BIO_printf(bio_err, "Error parsing config file\n");
		ERR_print_errors(bio_err);
		goto end;
	}

	spkstr = NCONF_get_string(conf, spksect, spkac);
		
	if(!spkstr) {
		BIO_printf(bio_err, "Can't find SPKAC called \"%s\"\n", spkac);
		ERR_print_errors(bio_err);
		goto end;
	}

	spki = NETSCAPE_SPKI_b64_decode(spkstr, -1);
	
	if(!spki) {
		BIO_printf(bio_err, "Error loading SPKAC\n");
		ERR_print_errors(bio_err);
		goto end;
	}

	if (outfile) out = BIO_new_file(outfile, "w");
	else {
		out = BIO_new_fp(OPENSSL_TYPE__FILE_STDOUT, BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
		{
		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
		    out = BIO_push(tmpbio, out);
		}

开发者ID:EddieGarmon，项目名称:netduino-netmf，代码行数:67，代码来源:spkac.cpp

示例13: x509_main


//.........这里部分代码省略.........
    if (out == NULL)
        goto end;

    if (need_rand)
        app_RAND_load_file(NULL, 0);

    if (!app_passwd(passinarg, NULL, &passin, NULL)) {
        BIO_printf(bio_err, "Error getting password\n");
        goto end;
    }

    if (!X509_STORE_set_default_paths(ctx)) {
        ERR_print_errors(bio_err);
        goto end;
    }

    if (fkeyfile) {
        fkey = load_pubkey(fkeyfile, keyformat, 0, NULL, e, "Forced key");
        if (fkey == NULL)
            goto end;
    }

    if ((CAkeyfile == NULL) && (CA_flag) && (CAformat == FORMAT_PEM)) {
        CAkeyfile = CAfile;
    } else if ((CA_flag) && (CAkeyfile == NULL)) {
        BIO_printf(bio_err,
                   "need to specify a CAkey if using the CA command\n");
        goto end;
    }

    if (extfile) {
        long errorline = -1;
        X509V3_CTX ctx2;
        extconf = NCONF_new(NULL);
        if (!NCONF_load(extconf, extfile, &errorline)) {
            if (errorline <= 0)
                BIO_printf(bio_err,
                           "error loading the config file '%s'\n", extfile);
            else
                BIO_printf(bio_err,
                           "error on line %ld of config file '%s'\n",
                           errorline, extfile);
            goto end;
        }
        if (!extsect) {
            extsect = NCONF_get_string(extconf, "default", "extensions");
            if (!extsect) {
                ERR_clear_error();
                extsect = "default";
            }
        }
        X509V3_set_ctx_test(&ctx2);
        X509V3_set_nconf(&ctx2, extconf);
        if (!X509V3_EXT_add_nconf(extconf, &ctx2, extsect, NULL)) {
            BIO_printf(bio_err,
                       "Error Loading extension section %s\n", extsect);
            ERR_print_errors(bio_err);
            goto end;
        }
    }

    if (reqfile) {
        EVP_PKEY *pkey;
        BIO *in;

        if (!sign_flag && !CA_flag) {

开发者ID:eight-pack-abdominals，项目名称:openssl，代码行数:67，代码来源:x509.c

示例14: main

int main(int argc, char **argv)
{
    char *filename = ZOOK_CONF;
    CONF *conf;
    long eline = 0;
    char *portstr, *svcs;
    int sockfd;
    pid_t disppid;
    int i, status;

    /* read configuration
       http://linux.die.net/man/5/config
       http://www.openssl.org/docs/apps/config.html
     */
    if (argc > 1)
        filename = argv[1];
    conf = NCONF_new(NULL);
    if (!NCONF_load(conf, filename, &eline))
    {
        if (eline)
            errx(1, "Failed parsing %s:%ld", filename, eline);
        else
            errx(1, "Failed opening %s", filename);
    }

    /* http server port, default 80 */
    if (!(portstr = NCONF_get_string(conf, "zook", "port")))
        portstr = "80";
    sockfd = start_server(portstr);
    warnx("Listening on port %s", portstr);
    signal(SIGCHLD, SIG_IGN);
    signal(SIGPIPE, SIG_IGN);

    /* launch the dispatch daemon */
    disppid = launch_svc(conf, "zookd");
    /* launch http services */
    if ((svcs = NCONF_get_string(conf, "zook", "http_svcs")))
        CONF_parse_list(svcs, ',', 1, &service_parse_cb, conf);

    /* send the server socket to zookd */
    if (sendfd(svcfds[0], &nsvcs, sizeof(nsvcs), sockfd) < 0)
        err(1, "sendfd to zookd");
    close(sockfd);

    /* send all svc sockets with their url patterns to http services */
    for (i = 1; i < nsvcs; ++i)
    {
        char *url = NCONF_get_string(conf, svcnames[i], "url");
        if (!url)
            url = ".*";
        sendfd(svcfds[0], url, strlen(url) + 1, svcfds[i]);
        close(svcfds[i]);
    }
    close(svcfds[0]);

    /* launch non-http services */
    if ((svcs = NCONF_get_string(conf, "zook", "extra_svcs")))
        CONF_parse_list(svcs, ',', 1, &service_parse_cb, conf);

    NCONF_free(conf);

    /* wait for zookd */
    waitpid(disppid, &status, 0);
}

开发者ID:GregoryVds，项目名称:BufferOverflowAttacks，代码行数:64，代码来源:zookld.c

示例15: openssl_main

int openssl_main(int Argc, char *Argv[])
#endif
	{
	ARGS arg;
#define PROG_NAME_SIZE	39
	char pname[PROG_NAME_SIZE+1];
	FUNCTION f,*fp;
	MS_STATIC const char *prompt;
	MS_STATIC char buf[1024];
	char *to_free=NULL;
	int n,i,ret=0;
	int argc;
	char **argv,*p;
	LHASH *prog=NULL;
	long errline;

	arg.data=NULL;
	arg.count=0;

	if (bio_err == NULL)
		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
#ifdef SYMBIAN
        BIO_set_fp(bio_err,fp_stderr,BIO_NOCLOSE|BIO_FP_TEXT);
#else
        BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
#endif
	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
		{
		if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
			{
			CRYPTO_malloc_debug_init();
			CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
			}
		else
			{
			/* OPENSSL_DEBUG_MEMORY=off */
			CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
			}
		}
	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);

#if 0
	if (getenv("OPENSSL_DEBUG_LOCKING") != NULL)
#endif
		{
		CRYPTO_set_locking_callback(lock_dbg_cb);
		}

	apps_startup();

	/* Lets load up our environment a little */
	p=getenv("OPENSSL_CONF");
	if (p == NULL)
		p=getenv("SSLEAY_CONF");
	if (p == NULL)
		p=to_free=make_config_name();

	default_config_file=p;

	config=NCONF_new(NULL);
	i=NCONF_load(config,p,&errline);
	if (i == 0)
		{
		NCONF_free(config);
		config = NULL;
		ERR_clear_error();
		}

	prog=prog_init();

	/* first check the program name */
	program_name(Argv[0],pname,sizeof pname);

	f.name=pname;
	fp=(FUNCTION *)lh_retrieve(prog,&f);
	if (fp != NULL)
		{
		Argv[0]=pname;
		ret=fp->func(Argc,Argv);
		goto end;
		}

	/* ok, now check that there are not arguments, if there are,
	 * run with them, shifting the ssleay off the front */
	if (Argc != 1)
		{
		Argc--;
		Argv++;
		ret=do_cmd(prog,Argc,Argv);
		if (ret < 0) ret=0;
		goto end;
		}

	/* ok, lets enter the old 'OpenSSL>' mode */

	for (;;)
		{
		ret=0;
		p=buf;
		n=sizeof buf;
//.........这里部分代码省略.........

开发者ID:cdaffara，项目名称:symbiandump-os2，代码行数:101，代码来源:openssl.c

示例16: MAIN


//.........这里部分代码省略.........
#ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
#endif

	if (need_rand)
		app_RAND_load_file(NULL, bio_err, 0);

	ERR_load_crypto_strings();

	if (!app_passwd(bio_err, passargin, NULL, &passin, NULL))
		{
		BIO_printf(bio_err, "Error getting password\n");
		goto end;
		}

	if (!X509_STORE_set_default_paths(ctx))
		{
		ERR_print_errors(bio_err);
		goto end;
		}

	if ((CAkeyfile == NULL) && (CA_flag) && (CAformat == FORMAT_PEM))
		{ CAkeyfile=CAfile; }
	else if ((CA_flag) && (CAkeyfile == NULL))
		{
		BIO_printf(bio_err,"need to specify a CAkey if using the CA command\n");
		goto end;
		}

	if (extfile)
		{
		long errorline = -1;
		X509V3_CTX ctx2;
		extconf = NCONF_new(NULL);
		if (!NCONF_load(extconf, extfile,&errorline))
			{
			if (errorline <= 0)
				BIO_printf(bio_err,
					"error loading the config file '%s'\n",
								extfile);
                	else
                        	BIO_printf(bio_err,
				       "error on line %ld of config file '%s'\n"
							,errorline,extfile);
			goto end;
			}
		if (!extsect)
			{
			extsect = NCONF_get_string(extconf, "default", "extensions");
			if (!extsect)
				{
				ERR_clear_error();
				extsect = "default";
				}
			}
		X509V3_set_ctx_test(&ctx2);
		X509V3_set_nconf(&ctx2, extconf);
		if (!X509V3_EXT_add_nconf(extconf, &ctx2, extsect, NULL))
			{
			BIO_printf(bio_err,
				"Error Loading extension section %s\n",
								 extsect);
			ERR_print_errors(bio_err);
			goto end;
			}
		}

开发者ID:0omega，项目名称:platform_external_openssl，代码行数:67，代码来源:x509.c

示例17: magic

/*
 * We need to replace a standard chunk of PKCS7 signature with one mandated
 * by Authenticode.  Problem is, replacing it just like that and then calling
 * PKCS7_final() would make OpenSSL segfault somewhere in PKCS7_dataFinal().
 * So, instead, we call PKCS7_dataInit(), then put our Authenticode-specific
 * data into BIO it returned, then call PKCS7_dataFinal() - which now somehow
 * does not panic - and _then_ we replace it in the signature.  This technique
 * was used in sbsigntool by Jeremy Kerr, and might have originated in
 * osslsigncode.
 */
static void
magic(PKCS7 *pkcs7, const char *digest, size_t digest_len)
{
	BIO *bio, *t_bio;
	ASN1_TYPE *t;
	ASN1_STRING *s;
	CONF *cnf;
	unsigned char *buf, *tmp;
	char *digest_hex, *magic_conf, *str;
	int len, nid, ok;

	digest_hex = bin2hex(digest, digest_len);

	/*
	 * Construct the SpcIndirectDataContent chunk.
	 */
	nid = OBJ_create("1.3.6.1.4.1.311.2.1.4", NULL, NULL);

	asprintf(&magic_conf, magic_fmt, digest_hex);
	if (magic_conf == NULL)
		err(1, "asprintf");

	bio = BIO_new_mem_buf((void *)magic_conf, -1);
	if (bio == NULL) {
		ERR_print_errors_fp(stderr);
		errx(1, "BIO_new_mem_buf(3) failed");
	}

	cnf = NCONF_new(NULL);
	if (cnf == NULL) {
		ERR_print_errors_fp(stderr);
		errx(1, "NCONF_new(3) failed");
	}

	ok = NCONF_load_bio(cnf, bio, NULL);
	if (ok == 0) {
		ERR_print_errors_fp(stderr);
		errx(1, "NCONF_load_bio(3) failed");
	}

	str = NCONF_get_string(cnf, "default", "asn1");
	if (str == NULL) {
		ERR_print_errors_fp(stderr);
		errx(1, "NCONF_get_string(3) failed");
	}

	t = ASN1_generate_nconf(str, cnf);
	if (t == NULL) {
		ERR_print_errors_fp(stderr);
		errx(1, "ASN1_generate_nconf(3) failed");
	}

	/*
	 * We now have our proprietary piece of ASN.1.  Let's do
	 * the actual signing.
	 */
	len = i2d_ASN1_TYPE(t, NULL);
	tmp = buf = calloc(1, len);
	if (tmp == NULL)
		err(1, "calloc");
	i2d_ASN1_TYPE(t, &tmp);

	/*
	 * We now have contents of 't' stuffed into memory buffer 'buf'.
	 */
	tmp = NULL;
	t = NULL;

	t_bio = PKCS7_dataInit(pkcs7, NULL);
	if (t_bio == NULL) {
		ERR_print_errors_fp(stderr);
		errx(1, "PKCS7_dataInit(3) failed");
	}

	BIO_write(t_bio, buf + 2, len - 2);

	ok = PKCS7_dataFinal(pkcs7, t_bio);
	if (ok == 0) {
		ERR_print_errors_fp(stderr);
		errx(1, "PKCS7_dataFinal(3) failed");
	}

	t = ASN1_TYPE_new();
	s = ASN1_STRING_new();
	ASN1_STRING_set(s, buf, len);
	ASN1_TYPE_set(t, V_ASN1_SEQUENCE, s);

	PKCS7_set0_type_other(pkcs7->d.sign->contents, nid, t);
}

开发者ID:2asoft，项目名称:freebsd，代码行数:99，代码来源:uefisign.c

示例18: spkac_main

int
spkac_main(int argc, char **argv)
{
	int i, ret = 1;
	BIO *in = NULL, *out = NULL;
	char *passin = NULL;
	char *spkstr = NULL;
	CONF *conf = NULL;
	NETSCAPE_SPKI *spki = NULL;
	EVP_PKEY *pkey = NULL;

	if (single_execution) {
		if (pledge("stdio rpath wpath cpath tty", NULL) == -1) {
			perror("pledge");
			exit(1);
		}
	}

	memset(&spkac_config, 0, sizeof(spkac_config));
	spkac_config.spkac = "SPKAC";
	spkac_config.spksect = "default";

	if (options_parse(argc, argv, spkac_options, NULL, NULL) != 0) {
		spkac_usage();
		return (1);
	}

	if (!app_passwd(bio_err, spkac_config.passargin, NULL, &passin, NULL)) {
		BIO_printf(bio_err, "Error getting password\n");
		goto end;
	}

	if (spkac_config.keyfile) {
		pkey = load_key(bio_err,
		    strcmp(spkac_config.keyfile, "-") ? spkac_config.keyfile
		    : NULL, FORMAT_PEM, 1, passin, "private key");
		if (!pkey) {
			goto end;
		}
		spki = NETSCAPE_SPKI_new();
		if (spkac_config.challenge)
			ASN1_STRING_set(spki->spkac->challenge,
			    spkac_config.challenge,
			    (int) strlen(spkac_config.challenge));
		NETSCAPE_SPKI_set_pubkey(spki, pkey);
		NETSCAPE_SPKI_sign(spki, pkey, EVP_md5());
		spkstr = NETSCAPE_SPKI_b64_encode(spki);
		if (spkstr == NULL) {
			BIO_printf(bio_err, "Error encoding SPKAC\n");
			ERR_print_errors(bio_err);
			goto end;
		}

		if (spkac_config.outfile)
			out = BIO_new_file(spkac_config.outfile, "w");
		else
			out = BIO_new_fp(stdout, BIO_NOCLOSE);

		if (!out) {
			BIO_printf(bio_err, "Error opening output file\n");
			ERR_print_errors(bio_err);
		} else {
			BIO_printf(out, "SPKAC=%s\n", spkstr);
			ret = 0;
		}
		free(spkstr);
		goto end;
	}
	if (spkac_config.infile)
		in = BIO_new_file(spkac_config.infile, "r");
	else
		in = BIO_new_fp(stdin, BIO_NOCLOSE);

	if (!in) {
		BIO_printf(bio_err, "Error opening input file\n");
		ERR_print_errors(bio_err);
		goto end;
	}
	conf = NCONF_new(NULL);
	i = NCONF_load_bio(conf, in, NULL);

	if (!i) {
		BIO_printf(bio_err, "Error parsing config file\n");
		ERR_print_errors(bio_err);
		goto end;
	}
	spkstr = NCONF_get_string(conf, spkac_config.spksect,
	    spkac_config.spkac);

	if (!spkstr) {
		BIO_printf(bio_err, "Can't find SPKAC called \"%s\"\n",
		    spkac_config.spkac);
		ERR_print_errors(bio_err);
		goto end;
	}
	spki = NETSCAPE_SPKI_b64_decode(spkstr, -1);

	if (!spki) {
		BIO_printf(bio_err, "Error loading SPKAC\n");
		ERR_print_errors(bio_err);
//.........这里部分代码省略.........

开发者ID:darksoul42，项目名称:bitrig，代码行数:101，代码来源:spkac.c

示例19: CertCfgOpenConfigFile

int CertCfgOpenConfigFile(const char *configFile, const char *configName)
{
  const char *pConfigFile = configFile;
  char *dirName;
  long err = 0;
  int len;
  CONF *conf;
  
  if (NULL == pConfigFile)
    {
      // first check the environment
      pConfigFile = getenv("OPENSSL_CONF");
      
      // if it didn't find it we'll use the default
      if (NULL == pConfigFile)
        pConfigFile = CERT_DEF_CONF_FILE;
    }
  
  // keep a copy in case of error
  CertCfgSetObjectStrValue(CERTCFG_CONFIG_FILE, pConfigFile);
  
  // make sure it's reasonable
  
  if (MAX_CERT_PATH <= (len = strlen(pConfigFile)))
    {
      return CERT_PATH_LIMIT_EXCEEDED;
    }
  conf = NCONF_new(NCONF_default());
  if (!NCONF_load(conf, pConfigFile, &err))
    {
      if (err == 0)
        {
          PRINT_RETURN_CODE(CERT_OPEN_FILE_FAILED);
          return CERT_OPEN_FILE_FAILED;
        }
      else
        {
          PRINT_RETURN_CODE(CERT_ILLFORMED_CONFIG_FILE);
          return CERT_ILLFORMED_CONFIG_FILE;
        }
    }
  
  /* Figure out the configuration inside the designate file that we want 
   * to use
   */
  if (NULL == configName)
    {
      if (!(configName = NCONF_get_string (conf, "ca", "default_ca")))
        return CERT_CONFIG_UNAVAILABLE;
    }
  
  
  /*
   * Let's find out if there is anything reasonable
   */
  if (!(dirName = NCONF_get_string (conf, configName, "dir")))
    {
      PRINT_RETURN_CODE(CERT_ILLFORMED_CONFIG_FILE);
      err = CERT_ILLFORMED_CONFIG_FILE;
    }
  else
    {
      struct stat statBuf;
      if (0 != stat(dirName, &statBuf))
        {
          fprintf(stdout, "Can't find %s\n", dirName);
          err = CERT_UNDEFINED_ROOT_DIR;
        }
    }
  
  // Cache it away
  CertCfgSetObjectStrValue(CERTCFG_CONFIG_NAME, (const char *)configName);
  configObject.conf = conf;
	
  // Now resolve the rest of the defaults from the config file
  // We are asuming that the file is well formed or this might have problems.
  // if we can't resolve the directory then fail.
  // if we can't resolve the subdirectories, don't fail put them under dir.
	
  populateConfig();

  return err;
}

开发者ID:openwebos，项目名称:pmcertificatemgr，代码行数:83，代码来源:cert_cfg.c

示例20: main

int main(int argc, char *argv[])
{
  int                  i;
  long                 i_val, err = 0;
  char                 *key, *s_val;
  STACK_OF(CONF_VALUE) *sec;
  CONF_VALUE           *item;
  CONF                 *conf;
 
  conf = NCONF_new(NCONF_default(  ));
  if (!NCONF_load(conf, CONFFILE, &err))
    {
      if (err == 0)
	int_error("Error opening configuration file");
      else
        {
	  fprintf(stderr, "Error in %s on line %li\n", CONFFILE, err);
	  int_error("Errors parsing configuration file");
        }
    }
  if (!(s_val = NCONF_get_string(conf, NULL, GLOB_VAR)))
    {
      fprintf(stderr, "Error finding \"%s\" in [%s]\n", GLOB_VAR, NULL);
      int_error("Error finding string");
    }
  printf("Sec: %s, Key: %s, Val: %s\n", NULL, GLOB_VAR, s_val);
#if (OPENSSL_VERSION_NUMBER > 0x00907000L)
  if (!(err = NCONF_get_number_e(conf, NULL, GLOB_NUM, &i_val)))
    {
      fprintf(stderr, "Error finding \"%s\" in [%s]\n", GLOB_NUM, NULL);
      int_error("Error finding number");
    }
#else
  if (!(s_val = NCONF_get_string(conf, NULL, GLOB_NUM)))
    {
      fprintf(stderr, "Error finding \"%s\" in [%s]\n", GLOB_VAR, NULL);
      int_error("Error finding number");
    }
  i_val = atoi(s_val);
#endif
  printf("Sec: %s, Key: %s, Val: %i\n", NULL, GLOB_VAR, i_val);
  if (!(key = NCONF_get_string(conf, PARAMS, SEC_NAME)))
    {
      fprintf(stderr, "Error finding \"%s\" in [%s]\n", SEC_NAME, PARAMS);
      int_error("Error finding string");
    }
  printf("Sec: %s, Key: %s, Val: %s\n", PARAMS, SEC_NAME, key);
  if (!(sec = NCONF_get_section(conf, key)))
    {
      fprintf(stderr, "Error finding [%s]\n", key);
      int_error("Error finding string");
    }
  for (i = 0;  i < sk_CONF_VALUE_num(sec);  i++)
    {
      item = sk_CONF_VALUE_value(sec, i);
      printf("Sec: %s, Key: %s, Val: %s\n",
	     item->section, item->name, item->value);
    }
 
  NCONF_free(conf);
  return 0;
}

开发者ID:iloveloveyou，项目名称:chirico，代码行数:62，代码来源:read_testconf.c

注：本文中的NCONF_new函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。