• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ NBITS函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NBITS函数的典型用法代码示例。如果您正苦于以下问题:C++ NBITS函数的具体用法?C++ NBITS怎么用?C++ NBITS使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NBITS函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: builtin_input_id

static int builtin_input_id(struct udev_device *dev, int argc, char *argv[], bool test)
{
        struct udev_device *pdev;
        unsigned long bitmask_ev[NBITS(EV_MAX)];
        unsigned long bitmask_abs[NBITS(ABS_MAX)];
        unsigned long bitmask_key[NBITS(KEY_MAX)];
        unsigned long bitmask_rel[NBITS(REL_MAX)];

        /* walk up the parental chain until we find the real input device; the
         * argument is very likely a subdevice of this, like eventN */
        pdev = dev;
        while (pdev != NULL && udev_device_get_sysattr_value(pdev, "capabilities/ev") == NULL)
                pdev = udev_device_get_parent_with_subsystem_devtype(pdev, "input", NULL);

        /* not an "input" class device */
        if (pdev == NULL)
                return EXIT_SUCCESS;

        /* Use this as a flag that input devices were detected, so that this
         * program doesn't need to be called more than once per device */
        udev_builtin_add_property(dev, test, "ID_INPUT", "1");
        get_cap_mask(dev, pdev, "capabilities/ev", bitmask_ev, sizeof(bitmask_ev), test);
        get_cap_mask(dev, pdev, "capabilities/abs", bitmask_abs, sizeof(bitmask_abs), test);
        get_cap_mask(dev, pdev, "capabilities/rel", bitmask_rel, sizeof(bitmask_rel), test);
        get_cap_mask(dev, pdev, "capabilities/key", bitmask_key, sizeof(bitmask_key), test);
        test_pointers(dev, bitmask_ev, bitmask_abs, bitmask_key, bitmask_rel, test);
        test_key(dev, bitmask_ev, bitmask_key, test);
        return EXIT_SUCCESS;
}
开发者ID:ariscop,项目名称:systemd,代码行数:29,代码来源:udev-builtin-input_id.c


示例2: IsJoystick

static int
IsJoystick(int fd, char *namebuf, const size_t namebuflen, SDL_JoystickGUID *guid)
{
    struct input_id inpid;
    Uint16 *guid16 = (Uint16 *) ((char *) &guid->data);

#if !SDL_USE_LIBUDEV
    /* When udev is enabled we only get joystick devices here, so there's no need to test them */
    unsigned long evbit[NBITS(EV_MAX)] = { 0 };
    unsigned long keybit[NBITS(KEY_MAX)] = { 0 };
    unsigned long absbit[NBITS(ABS_MAX)] = { 0 };

    if ((ioctl(fd, EVIOCGBIT(0, sizeof(evbit)), evbit) < 0) ||
        (ioctl(fd, EVIOCGBIT(EV_KEY, sizeof(keybit)), keybit) < 0) ||
        (ioctl(fd, EVIOCGBIT(EV_ABS, sizeof(absbit)), absbit) < 0)) {
        return (0);
    }

    if (!(test_bit(EV_KEY, evbit) && test_bit(EV_ABS, evbit) &&
          test_bit(ABS_X, absbit) && test_bit(ABS_Y, absbit))) {
        return 0;
    }
#endif

    if (ioctl(fd, EVIOCGNAME(namebuflen), namebuf) < 0) {
        return 0;
    }

    if (ioctl(fd, EVIOCGID, &inpid) < 0) {
        return 0;
    }

#ifdef DEBUG_JOYSTICK
    printf("Joystick: %s, bustype = %d, vendor = 0x%x, product = 0x%x, version = %d\n", namebuf, inpid.bustype, inpid.vendor, inpid.product, inpid.version);
#endif

    SDL_memset(guid->data, 0, sizeof(guid->data));

    /* We only need 16 bits for each of these; space them out to fill 128. */
    /* Byteswap so devices get same GUID on little/big endian platforms. */
    *(guid16++) = SDL_SwapLE16(inpid.bustype);
    *(guid16++) = 0;

    if (inpid.vendor && inpid.product && inpid.version) {
        *(guid16++) = SDL_SwapLE16(inpid.vendor);
        *(guid16++) = 0;
        *(guid16++) = SDL_SwapLE16(inpid.product);
        *(guid16++) = 0;
        *(guid16++) = SDL_SwapLE16(inpid.version);
        *(guid16++) = 0;
    } else {
        SDL_strlcpy((char*)guid16, namebuf, sizeof(guid->data) - 4);
    }

    return 1;
}
开发者ID:03050903,项目名称:Torque3D,代码行数:56,代码来源:SDL_sysjoystick.c


示例3: EVIOCGBIT

void JoypadLinux::setup_joypad_properties(int p_id) {

	Joypad *joy = &joypads[p_id];

	unsigned long keybit[NBITS(KEY_MAX)] = { 0 };
	unsigned long absbit[NBITS(ABS_MAX)] = { 0 };

	int num_buttons = 0;
	int num_axes = 0;

	if ((ioctl(joy->fd, EVIOCGBIT(EV_KEY, sizeof(keybit)), keybit) < 0) ||
			(ioctl(joy->fd, EVIOCGBIT(EV_ABS, sizeof(absbit)), absbit) < 0)) {
		return;
	}
	for (int i = BTN_JOYSTICK; i < KEY_MAX; ++i) {

		if (test_bit(i, keybit)) {

			joy->key_map[i] = num_buttons++;
		}
	}
	for (int i = BTN_MISC; i < BTN_JOYSTICK; ++i) {

		if (test_bit(i, keybit)) {

			joy->key_map[i] = num_buttons++;
		}
	}
	for (int i = 0; i < ABS_MISC; ++i) {
		/* Skip hats */
		if (i == ABS_HAT0X) {
			i = ABS_HAT3Y;
			continue;
		}
		if (test_bit(i, absbit)) {

			joy->abs_map[i] = num_axes++;
			joy->abs_info[i] = memnew(input_absinfo);
			if (ioctl(joy->fd, EVIOCGABS(i), joy->abs_info[i]) < 0) {
				memdelete(joy->abs_info[i]);
				joy->abs_info[i] = NULL;
			}
		}
	}

	joy->force_feedback = false;
	joy->ff_effect_timestamp = 0;
	unsigned long ffbit[NBITS(FF_CNT)];
	if (ioctl(joy->fd, EVIOCGBIT(EV_FF, sizeof(ffbit)), ffbit) != -1) {
		if (test_bit(FF_RUMBLE, ffbit)) {
			joy->force_feedback = true;
		}
	}
}
开发者ID:MattUV,项目名称:godot,代码行数:54,代码来源:joypad_linux.cpp


示例4: main

int main (int argc, char** argv)
{
	struct udev *udev;
	struct udev_device *dev;

	char devpath[PATH_MAX];
	unsigned long bitmask_ev[NBITS(EV_MAX)];
	unsigned long bitmask_abs[NBITS(ABS_MAX)];
	unsigned long bitmask_key[NBITS(KEY_MAX)];
        unsigned long bitmask_rel[NBITS(REL_MAX)];

	if (argc != 2) {
		fprintf(stderr, "Usage: %s <device path (without /sys)>\n", argv[0]);
		exit(1);
	}

	/* get the device */
	udev = udev_new();
	if (udev == NULL)
		return 1;

	snprintf(devpath, sizeof(devpath), "%s/%s", udev_get_sys_path(udev), argv[1]);
	dev = udev_device_new_from_syspath(udev, devpath);
	if (dev == NULL) {
		fprintf(stderr, "unable to access '%s'\n", devpath);
		return 1;
	}

	/* walk up the parental chain until we find the real input device; the
	 * argument is very likely a subdevice of this, like eventN */
	while (dev != NULL && udev_device_get_sysattr_value(dev, "capabilities/ev") == NULL)
		dev = udev_device_get_parent_with_subsystem_devtype(dev, "input", NULL);

	/* not an "input" class device */
	if (dev == NULL)
		return 0;

	/* Use this as a flag that input devices were detected, so that this
	 * program doesn't need to be called more than once per device */
	puts("ID_INPUT=1");

	get_cap_mask (dev, "capabilities/ev", bitmask_ev, sizeof (bitmask_ev));
	get_cap_mask (dev, "capabilities/abs", bitmask_abs, sizeof (bitmask_abs));
	get_cap_mask (dev, "capabilities/rel", bitmask_rel, sizeof (bitmask_rel));
	get_cap_mask (dev, "capabilities/key", bitmask_key, sizeof (bitmask_key));

	test_pointers(bitmask_ev, bitmask_abs, bitmask_key, bitmask_rel);

	test_key(bitmask_ev, bitmask_key);

	return 0;
}
开发者ID:ystk,项目名称:debian-udev,代码行数:52,代码来源:input_id.c


示例5: chantodepth

int
chantodepth(ulong c)
{
	int n;

	for(n=0; c; c>>=8){
		if(TYPE(c) >= NChan || NBITS(c) > 8 || NBITS(c) <= 0)
			return 0;
		n += NBITS(c);
	}
	if(n==0 || (n>8 && n%8) || (n<8 && 8%n))
		return 0;
	return n;
}
开发者ID:0intro,项目名称:drawterm,代码行数:14,代码来源:chan.c


示例6: builtin_input_id

static int builtin_input_id(struct udev_device *dev, int argc, char *argv[], bool test) {
        struct udev_device *pdev;
        unsigned long bitmask_ev[NBITS(EV_MAX)];
        unsigned long bitmask_abs[NBITS(ABS_MAX)];
        unsigned long bitmask_key[NBITS(KEY_MAX)];
        unsigned long bitmask_rel[NBITS(REL_MAX)];
        unsigned long bitmask_props[NBITS(INPUT_PROP_MAX)];
        const char *sysname, *devnode;
        bool is_pointer;
        bool is_key;

        assert(dev);

        /* walk up the parental chain until we find the real input device; the
         * argument is very likely a subdevice of this, like eventN */
        pdev = dev;
        while (pdev != NULL && udev_device_get_sysattr_value(pdev, "capabilities/ev") == NULL)
                pdev = udev_device_get_parent_with_subsystem_devtype(pdev, "input", NULL);

        if (pdev) {
                /* Use this as a flag that input devices were detected, so that this
                 * program doesn't need to be called more than once per device */
                udev_builtin_add_property(dev, test, "ID_INPUT", "1");
                get_cap_mask(dev, pdev, "capabilities/ev", bitmask_ev, sizeof(bitmask_ev), test);
                get_cap_mask(dev, pdev, "capabilities/abs", bitmask_abs, sizeof(bitmask_abs), test);
                get_cap_mask(dev, pdev, "capabilities/rel", bitmask_rel, sizeof(bitmask_rel), test);
                get_cap_mask(dev, pdev, "capabilities/key", bitmask_key, sizeof(bitmask_key), test);
                get_cap_mask(dev, pdev, "properties", bitmask_props, sizeof(bitmask_props), test);
                is_pointer = test_pointers(dev, bitmask_ev, bitmask_abs,
                                           bitmask_key, bitmask_rel,
                                           bitmask_props, test);
                is_key = test_key(dev, bitmask_ev, bitmask_key, test);
                /* Some evdev nodes have only a scrollwheel */
                if (!is_pointer && !is_key && test_bit(EV_REL, bitmask_ev) &&
                    (test_bit(REL_WHEEL, bitmask_rel) || test_bit(REL_HWHEEL, bitmask_rel)))
                        udev_builtin_add_property(dev, test, "ID_INPUT_KEY", "1");
                if (test_bit(EV_SW, bitmask_ev))
                        udev_builtin_add_property(dev, test, "ID_INPUT_SWITCH", "1");

        }

        devnode = udev_device_get_devnode(dev);
        sysname = udev_device_get_sysname(dev);
        if (devnode && sysname && startswith(sysname, "event"))
                extract_info(dev, devnode, test);

        return EXIT_SUCCESS;
}
开发者ID:heftig,项目名称:systemd,代码行数:48,代码来源:udev-builtin-input_id.c


示例7: chantostr

char*
chantostr(char *buf, ulong cc)
{
	ulong c, rc;
	char *p;

	if(chantodepth(cc) == 0)
		return nil;

	/* reverse the channel descriptor so we can easily generate the string in the right order */
	rc = 0;
	for(c=cc; c; c>>=8){
		rc <<= 8;
		rc |= c&0xFF;
	}

	p = buf;
	for(c=rc; c; c>>=8) {
		*p++ = channames[TYPE(c)];
		*p++ = '0'+NBITS(c);
	}
	*p = 0;

	return buf;
}
开发者ID:0intro,项目名称:drawterm,代码行数:25,代码来源:chan.c


示例8: check_mouse

// Check for EV_REL (REL_X and REL_Y) and, because touchscreens can have those too,
// check also for EV_KEY (BTN_LEFT and BTN_RIGHT)
static void check_mouse(int fd)
{
    if (has_mouse) {
        return;
    }

    unsigned long bit[EV_MAX][NBITS(KEY_MAX)];
    memset(bit, 0, sizeof(bit));
    ioctl(fd, EVIOCGBIT(0, EV_MAX), bit[0]);

    if (!test_bit(EV_REL, bit[0]) || !test_bit(EV_KEY, bit[0])) {
        return;
    }

    ioctl(fd, EVIOCGBIT(EV_REL, KEY_MAX), bit[EV_REL]);
    if (!test_bit(REL_X, bit[EV_REL]) || !test_bit(REL_Y, bit[EV_REL])) {
        return;
    }

    ioctl(fd, EVIOCGBIT(EV_KEY, KEY_MAX), bit[EV_KEY]);
    if (!test_bit(BTN_LEFT, bit[EV_KEY]) || !test_bit(BTN_RIGHT, bit[EV_KEY])) {
        return;
    }

    has_mouse = 1;
}
开发者ID:Nonta72,项目名称:DualBootPatcher,代码行数:28,代码来源:events.cpp


示例9: getTouchBounds

void InputEventSystem::getTouchBounds(int fd)
{
  unsigned long bits[NBITS(KEY_MAX)];
  struct input_absinfo abs;

  ioctl (fd, EVIOCGBIT (EV_ABS, KEY_MAX), bits);
  if (!(test_bit (ABS_MT_POSITION_X, bits) &&
        test_bit (ABS_MT_POSITION_Y, bits)))
    {
      DOUT("absolute events");
      ioctl (fd, EVIOCGABS (ABS_X), &abs);
      minX  = abs.minimum;
      maxX  = abs.maximum;
      ioctl (fd, EVIOCGABS (ABS_Y), &abs);
      minY = abs.minimum;
      maxY = abs.maximum;
      DOUT("NO multitouch");
    }
  else
  {
    DOUT("absolute multitouch events");
    ioctl (fd, EVIOCGABS (ABS_MT_POSITION_X), &abs);
    minX = abs.minimum;
    maxX = abs.maximum;
    ioctl (fd, EVIOCGABS (ABS_MT_POSITION_Y), &abs);
    minY = abs.minimum;
    maxY = abs.maximum;
    DOUT("HAS multitouch");
  }
  dx = maxX - minX;
  dy = maxY - minY;    
}
开发者ID:jomanto,项目名称:le2,代码行数:32,代码来源:InputEventSystem.cpp


示例10: openfd

int openfd(void)
{
	int fd;
	const char *dirname = "/dev/input";
	DIR *dir;
	if ((dir = opendir(dirname))) {
		struct dirent *de;
		unsigned long caps[NBITS(SW_TABLET_MODE+1)];
		while ((de = readdir(dir))) {
			if (de->d_name[0] != 'e') // eventX
				continue;
			char name[PATH_MAX];
			snprintf(name, PATH_MAX, "%s/%s", dirname, de->d_name);
			fd = open(name, O_RDONLY);
			if (fd < 0) {
				ALOGE("could not open %s, %s", name, strerror(errno));
				continue;
			}
			memset(caps, 0, sizeof(caps));
			if (ioctl(fd, EVIOCGBIT(EV_SW, sizeof(caps)), caps) < 1) {
				ALOGE("could not get device caps for %s, %s\n", name, strerror(errno));
				continue;
			}
			if (test_bit(SW_TABLET_MODE, caps)) {
				ALOGI("open %s(%s) ok", de->d_name, name);
				return fd;
			}
			close(fd);
		}
		closedir(dir);
	}
	return -1;
}
开发者ID:cchaowakool,项目名称:atvx86,代码行数:33,代码来源:tablet-mode.c


示例11: set_resolution_params

/*
 * set_resolution_params()
 *
 * Due to usage of multiple display related APIs resolution data is located in
 * more than one place. This function updates them all.
 */
static void set_resolution_params(int x, int y)
{
	panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y);
	panel_info.vl_col = x;
	panel_info.vl_row = y;
	lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
}
开发者ID:CogSystems,项目名称:u-boot,代码行数:13,代码来源:omap3_display.c


示例12: EV_IsJoystick

static int EV_IsJoystick(int fd)
{
	unsigned long evbit[NBITS(EV_MAX)] = { 0 };
	unsigned long keybit[NBITS(KEY_MAX)] = { 0 };
	unsigned long absbit[NBITS(ABS_MAX)] = { 0 };

	if ( (ioctl(fd, EVIOCGBIT(0, sizeof(evbit)), evbit) < 0) ||
	     (ioctl(fd, EVIOCGBIT(EV_KEY, sizeof(keybit)), keybit) < 0) ||
	     (ioctl(fd, EVIOCGBIT(EV_ABS, sizeof(absbit)), absbit) < 0) ) {
		return(0);
	}
	if (!(test_bit(EV_KEY, evbit) && test_bit(EV_ABS, evbit) &&
	      test_bit(ABS_X, absbit) && test_bit(ABS_Y, absbit) &&
	     (test_bit(BTN_TRIGGER, keybit) || test_bit(BTN_A, keybit) || test_bit(BTN_1, keybit)))) return 0;
	return(1);
}
开发者ID:Sonophoto,项目名称:Soar-SC,代码行数:16,代码来源:SDL_sysjoystick.c


示例13: print_device_info

static int print_device_info(int fd) {
	int i, j;
	int version;
	unsigned short id[4];
	unsigned long bit[EV_MAX][NBITS(KEY_MAX)];

	if (ioctl(fd, EVIOCGVERSION, &version)) {
		perror("can't get version");
		return 1;
	}
	printf("Input driver version is %d.%d.%d\n", 
	       version >> 16, (version >> 8) & 0xff, version & 0xff);

	ioctl(fd, EVIOCGID, id);
	printf("Input device ID: bus 0x%x vendor 0x%x product 0x%x version 0x%x\n",
		id[ID_BUS], id[ID_VENDOR], id[ID_PRODUCT], id[ID_VERSION]);

	memset(bit, 0, sizeof(bit));
	ioctl(fd, EVIOCGBIT(0, EV_MAX), bit[0]);
	printf("Supported events:\n");
	for (i = 0; i < EV_MAX; i++) {
 		if (test_bit(i, bit[0])) {
			printf("  Event type %d\n", i);
			if (!i) continue;
			ioctl(fd, EVIOCGBIT(i, KEY_MAX), bit[i]);
			for (j = 0; j < KEY_MAX; j++) {
				if (test_bit(j, bit[i])) {
					printf("%d, ", j);
				}
			}
			printf("\n");
		}
	}
	return 0;
}
开发者ID:darkelement,项目名称:simplistic-examples,代码行数:35,代码来源:evdev.c


示例14: pxafb_init_mem

static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid)
{
	u_long palette_mem_size;
	struct pxafb_info *fbi = &vid->pxa;
	int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;

	fbi->screen = (u_long)lcdbase;

	fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
	palette_mem_size = fbi->palette_size * sizeof(u16);

	debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
	/* locate palette and descs at end of page following fb */
	fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;

	return 0;
}
开发者ID:ehamine,项目名称:u-boot,代码行数:17,代码来源:pxa_lcd.c


示例15: epdc_ctrl_init

int epdc_ctrl_init(void *lcdbase)
{
	/*
	 * We rely on lcdbase being a physical address, i.e., either MMU off,
	 * or 1-to-1 mapping. Might want to add some virt2phys here.
	 */
	if (!lcdbase)
		return -1;

	eink_color_fg = 0xFF;
	eink_color_bg = 0xFF;

	/* Reset */
	REG_SET(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_SFTRST);
	while (!(REG_RD(EPDC_BASE, EPDC_CTRL) & EPDC_CTRL_CLKGATE))
		;
	REG_CLR(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_SFTRST);

	/* Enable clock gating (clear to enable) */
	REG_CLR(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_CLKGATE);
	while (REG_RD(EPDC_BASE, EPDC_CTRL) &
	       (EPDC_CTRL_SFTRST | EPDC_CTRL_CLKGATE))
		;

	debug("resolution %dx%d, bpp %d\n", (int)panel_info.vl_col,
		(int)panel_info.vl_row, NBITS(panel_info.vl_bpix));


	/* Set framebuffer pointer */
	REG_WR(EPDC_BASE, EPDC_UPD_ADDR, (u32)lcdbase);

#if 0
	/* Set Working Buffer pointer */
	REG_WR(EPDC_BASE, EPDC_WB_ADDR, panel_info.epdc_data.working_buf_addr);
	/* Set Waveform Buffer pointer */
	REG_WR(EPDC_BASE, EPDC_WVADDR, panel_info.epdc_data.waveform_buf_addr);
#endif 

	/* Set waveform and working buffer, they will be changed later */
	REG_WR(EPDC_BASE, EPDC_WVADDR, (unsigned long)CONFIG_TEMP_INIT_WAVEFORM_ADDR);
	REG_WR(EPDC_BASE, EPDC_WB_ADDR, (unsigned long)CONFIG_WORKING_BUF_ADDR);
	
#if 0
	/* Get waveform data address and offset */
	int data_offs = setup_waveform_file();
	if(data_offs == -1) {
		printf("Can't load waveform data!\n");
		return -1;
	}
#endif

	/* Initialize EPDC, passing pointer to EPDC registers */
	epdc_init_settings();

	epdc_initialized = 1;

	return;
}
开发者ID:pocketbook-free,项目名称:uboot_613,代码行数:58,代码来源:mxc_epdc_fb.c


示例16: setup_joystick_properties

void joystick_linux::setup_joystick_properties(int p_id) {

	Joystick* joy = &joysticks[p_id];

	unsigned long keybit[NBITS(KEY_MAX)] = { 0 };
	unsigned long absbit[NBITS(ABS_MAX)] = { 0 };

	int num_buttons = 0;
	int num_axes = 0;

	if ((ioctl(joy->fd, EVIOCGBIT(EV_KEY, sizeof(keybit)), keybit) < 0) ||
	    (ioctl(joy->fd, EVIOCGBIT(EV_ABS, sizeof(absbit)), absbit) < 0)) {
		return;
	}
	for (int i = BTN_JOYSTICK; i < KEY_MAX; ++i) {

		if (test_bit(i, keybit)) {

			joy->key_map[i] = num_buttons++;
		}
	}
	for (int i = BTN_MISC; i < BTN_JOYSTICK; ++i) {

		if (test_bit(i, keybit)) {

			joy->key_map[i] = num_buttons++;
		}
	}
	for (int i = 0; i < ABS_MISC; ++i) {
		/* Skip hats */
		if (i == ABS_HAT0X) {
			i = ABS_HAT3Y;
			continue;
		}
		if (test_bit(i, absbit)) {

			joy->abs_map[i] = num_axes++;
			joy->abs_info[i] = memnew(input_absinfo);
			if (ioctl(joy->fd, EVIOCGABS(i), joy->abs_info[i]) < 0) {
				memdelete(joy->abs_info[i]);
				joy->abs_info[i] = NULL;
			}
		}
	}
}
开发者ID:tinystringsentertainment,项目名称:godot,代码行数:45,代码来源:joystick_linux.cpp


示例17: calc_fbsize

/*
 * Calculate fb size for VIDEOLFB_ATAG.
 */
ulong calc_fbsize (void)
{
	ulong size;
	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;

	size = line_length * panel_info.vl_row;

	return size;
}
开发者ID:jhendrix,项目名称:deg-uboot,代码行数:12,代码来源:mpc8xx_lcd.c


示例18: jz_lcd_desc_init

static void jz_lcd_desc_init(vidinfo_t *vid)
{
	struct jz_fb_info * fbi;
	fbi = &vid->jz_fb;
	fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*32);
	fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*32);
	fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*32);


//	#define BYTES_PER_PANEL	 (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)
#define BYTES_PER_PANEL	 (((vid->vl_col * NBITS(vid->vl_bpix) / 8 + 3) >> 2 << 2) * vid->vl_row)

	/* populate descriptors */
	fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow);
	fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL));
	fbi->dmadesc_fblow->fidr  = 1;
	fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ;
	fbi->dmadesc_fblow->offsize = 0;
	fbi->dmadesc_fblow->page_width = 0;
	fbi->dmadesc_fblow->desc_size = jzfb.osd.fg1.h << 16 | jzfb.osd.fg1.w;
	REG_LCD_SIZE1 = (jzfb.osd.fg1.h<<16)|jzfb.osd.fg1.w;

	fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */

	fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen); 
	fbi->dmadesc_fbhigh->fidr = 0;
	fbi->dmadesc_fbhigh->ldcmd =  BYTES_PER_PANEL / 4; /* length in word */
	fbi->dmadesc_fbhigh->offsize = 0;
	fbi->dmadesc_fbhigh->page_width = 0;
	fbi->dmadesc_fbhigh->desc_size = jzfb.osd.fg0.h << 16 | jzfb.osd.fg0.w;
	REG_LCD_SIZE0 = jzfb.osd.fg0.h << 16|jzfb.osd.fg0.w;

	fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette);
	fbi->dmadesc_palette->fidr  = 0;
	fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28);

	if( NBITS(vid->vl_bpix) < 12)
	{
		/* assume any mode with <12 bpp is palette driven */
		fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh);
		fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette);
		/* flips back and forth between pal and fbhigh */
		fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette);
	}
	else
	{
		/* palette shouldn't be loaded in true-color mode */
		fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh);
		fbi->dmadesc_fblow->fdadr = virt_to_phys((void *)fbi->dmadesc_fblow);
		fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */
		fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* just fblow */
	}
//	print_lcdc_desc(fbi);
	flush_cache_all();
//	print_lcdc_desc(fbi);
}
开发者ID:yindian,项目名称:dingoo-linux,代码行数:56,代码来源:jz4750_lcd.c


示例19: Verify_Sign

static int Verify_Sign(const_longnum_ptr mdc, const_longnum_ptr r,
		const_longnum_ptr s, const_longnum_ptr y) {
	/*>>>>                                               <<<<*
	 *>>>> AUFGABE: Verifizieren einer El-Gamal-Signatur <<<<*
	 *>>>>                                               <<<<*/

	longnum gleich_links, gleich_rechts;

	LInitNumber(&gleich_links, NBITS(&p), 0);
	LInitNumber(&gleich_rechts, NBITS(&p), 0);

	LModMultExp(y, r, r, s, &gleich_links, &p);
	LModExp(&w, mdc, &gleich_rechts, &p);

	if (!LCompare(&gleich_links, &gleich_rechts))
		return 1;
	else
		return 0;
}
开发者ID:nbfhjgr,项目名称:mima_praktikumI,代码行数:19,代码来源:getreport.c


示例20: memsetchan

int
memsetchan(Memimage *i, ulong chan)
{
	int d;
	int t, j, k;
	ulong cc;
	int bytes;

	if((d = chantodepth(chan)) == 0) {
		werrstr("bad channel descriptor");
		return -1;
	}

	i->depth = d;
	i->chan = chan;
	i->flags &= ~(Fgrey|Falpha|Fcmap|Fbytes);
	bytes = 1;
	for(cc=chan, j=0, k=0; cc; j+=NBITS(cc), cc>>=8, k++){
		t=TYPE(cc);
		if(t < 0 || t >= NChan){
			werrstr("bad channel string");
			return -1;
		}
		if(t == CGrey)
			i->flags |= Fgrey;
		if(t == CAlpha)
			i->flags |= Falpha;
		if(t == CMap && i->cmap == nil){
			i->cmap = memdefcmap;
			i->flags |= Fcmap;
		}

		i->shift[t] = j;
		i->mask[t] = (1<<NBITS(cc))-1;
		i->nbits[t] = NBITS(cc);
		if(NBITS(cc) != 8)
			bytes = 0;
	}
	i->nchan = k;
	if(bytes)
		i->flags |= Fbytes;
	return 0;
}
开发者ID:99years,项目名称:plan9,代码行数:43,代码来源:alloc.c



注:本文中的NBITS函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ NCBI_THROW函数代码示例发布时间:2022-05-30
下一篇:
C++ NBC_Sched_send函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap