C++ NATIVE_PROFILE_PAL_COM函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NATIVE_PROFILE_PAL_COM函数的典型用法代码示例。如果您正苦于以下问题：C++ NATIVE_PROFILE_PAL_COM函数的具体用法？C++ NATIVE_PROFILE_PAL_COM怎么用？C++ NATIVE_PROFILE_PAL_COM使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NATIVE_PROFILE_PAL_COM函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SSL_ParseCertificate

BOOL SSL_ParseCertificate( const char* certificate, size_t certLength, const char* szPwd, X509CertData* certData )
{
    if (!s_init_done) s_init_done=ssl_initialize_internal();
    NATIVE_PROFILE_PAL_COM();
    return ssl_parse_certificate_internal((void *)certificate,
                                          TINYCLR_SSL_STRLEN(certificate),
                                          NULL, (void*)certData);
}

开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:8，代码来源:openssl.cpp

示例2: SSL_Initialize

BOOL SSL_Initialize()
{
    NATIVE_PROFILE_PAL_COM();

    memset(&g_SSL_Driver, 0, sizeof(g_SSL_Driver));
    
    return TRUE;
}

开发者ID:EddieGarmon，项目名称:netduino-netmf，代码行数:8，代码来源:openssl.cpp

示例3: NATIVE_PROFILE_PAL_COM

void Sockets_NetduinoIP_Driver::ApplyConfigExtended()
{
    NATIVE_PROFILE_PAL_COM();
    if(!HAL_CONFIG_BLOCK::ApplyConfig( g_NetworkConfigExtended.GetDriverName(), &g_NetworkConfigExtended, sizeof(g_NetworkConfigExtended) ))
    {
        // save to the dynamic config section so that MFDeploy will be able to get the configuration.
        SaveConfigExtended(0, NULL);            
    }
}

开发者ID:EddieGarmon，项目名称:netduino-netmf，代码行数:9，代码来源:sockets_netduinoip.cpp

示例4: NATIVE_PROFILE_PAL_COM

BOOL USART_Driver::Initialize( int ComPortNum, int BaudRate, int Parity, int DataBits, int StopBits, int FlowValue )
{
    NATIVE_PROFILE_PAL_COM();

    if((ComPortNum < 0) || (ComPortNum >= TOTAL_USART_PORT))
    {
        //DEBUG_TRACE1(TRACE_ALWAYS, "ERROR: VTE_USART_Initialize: invalid ComPortNum %u\r\n", ComPortNum);
        return FALSE;
    }

    {
        GLOBAL_LOCK(irq);

        HAL_USART_STATE& State = Hal_Usart_State[ComPortNum];

        if(!IS_USART_INITIALIZED(State))
        {
            State.fDataEventSet = FALSE;
            State.PortIndex     = ComPortNum;

            // DO NOT INITIALIZE EVENT CALLBACKS HERE BECAUSE THEY CAN BE SET PRIOR TO INITIALIZE

            State.Flag                      = 0;                //clear all the flag bits
            SET_USART_FLAG(State, HAL_USART_STATE::c_INITIALIZED | HAL_USART_STATE::c_TX_XON_STATE);

            // If SW flow control on input is enabled
            if (FlowValue & USART_FLOW_SW_IN_EN)
            {
                SET_USART_FLAG(State, HAL_USART_STATE::c_RX_SWFLOW_CTRL);
            }

            // If SW flow control on output is enabled
            if (FlowValue & USART_FLOW_SW_OUT_EN)
            {
                SET_USART_FLAG(State, HAL_USART_STATE::c_TX_SWFLOW_CTRL);
            }

            // If HW flow control on input is enabled (HW output control is either totally in hardware or in HAL only)
            if (FlowValue & USART_FLOW_HW_IN_EN)
            {
                SET_USART_FLAG(State, HAL_USART_STATE::c_RX_HWFLOW_CTRL);
            }

            State.RxBufferHighWaterMark = USART_BUFFER_HIGH_WATER_MARK( RX_USART_BUFFER_SIZE );
            State.RxBufferLowWaterMark  = USART_BUFFER_LOW_WATER_MARK ( RX_USART_BUFFER_SIZE );

            State.TicksStartTxXOFF      = 0;

            State.TxQueue.Initialize( &TxBuffer_Com[ComPortNum * TX_USART_BUFFER_SIZE], TX_USART_BUFFER_SIZE);
            State.RxQueue.Initialize( &RxBuffer_Com[ComPortNum * RX_USART_BUFFER_SIZE], RX_USART_BUFFER_SIZE );

            return CPU_USART_Initialize( ComPortNum, BaudRate, Parity, DataBits, StopBits, FlowValue );
        }

        return TRUE;
    }
}

开发者ID:TinkerPot，项目名称:.NETMF_for_LPC17xx，代码行数:57，代码来源:usart.cpp

示例5: NATIVE_PROFILE_PAL_COM

void I2C_HAL_XACTION::Initialize( I2C_USER_CONFIGURATION& config, I2C_HAL_XACTION_UNIT** xActionUnits, size_t numXActionUnits )
{
    NATIVE_PROFILE_PAL_COM();
    m_xActionUnits    = xActionUnits;
    m_numXActionUnits = numXActionUnits;
    m_current         = 0;
    m_clockRate       = I2C_Internal_GetClockRate( config.ClockRate );        
    m_address         = config.Address;        
    m_status          = c_Status_Idle;
}

开发者ID:prabby，项目名称:miniclr，代码行数:10，代码来源:i2c.cpp

示例6: SSL_Uninitialize

BOOL SSL_Uninitialize()
{
    NATIVE_PROFILE_PAL_COM();
    BOOL retVal;

    retVal = ssl_uninitialize_internal();

    s_init_done = FALSE;
    
    return retVal;
}

开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:11，代码来源:openssl.cpp

示例7: SSL_ClearCertificateAuthority

void SSL_ClearCertificateAuthority( int sslContextHandle )
{
    NATIVE_PROFILE_PAL_COM();

    if((sslContextHandle >= ARRAYSIZE(g_SSL_Driver.m_sslContextArray)) || (sslContextHandle < 0))
    {
        return;
    }

    memset(&g_SSL_Driver.m_sslContextArray[sslContextHandle].m_certificates[0], 0, sizeof(g_SSL_Driver.m_sslContextArray[sslContextHandle].m_certificates));
    g_SSL_Driver.m_sslContextArray[sslContextHandle].m_certificateCount = 0;
}

开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:12，代码来源:ssl.cpp

示例8: SSL_ParseCertificate

BOOL SSL_ParseCertificate( const char* certificate, size_t certLength, const char* szPwd, X509CertData* certData )
{
    NATIVE_PROFILE_PAL_COM();
    RTCertificate rt_cert;
    int ret;

    rt_cert.cert = (X509Certificate)certificate;
    rt_cert.size = certLength;

    ret = secure_parse_certificate( (const RTCertificate *)&rt_cert, (RTCertData*)certData );

    return (-1 != ret);
}

开发者ID:dienbk7x，项目名称:NetmfSTM32，代码行数:13，代码来源:ssl.cpp

示例9: DebuggerPort_Flush

BOOL DebuggerPort_Flush( COM_HANDLE ComPortNum )
{
    NATIVE_PROFILE_PAL_COM();
    switch(ExtractTransport(ComPortNum))
    {
        case USART_TRANSPORT:
            return USART_Flush( ConvertCOM_ComPort( ComPortNum ) );
        case USB_TRANSPORT:
            return USB_Flush( ConvertCOM_UsbStream(ComPortNum) );
        case SOCKET_TRANSPORT:
            return SOCKETS_Flush( ConvertCOM_SockPort(ComPortNum) );
    }

    return FALSE;
}

开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:15，代码来源:ComDirector.cpp

示例10: CPU_ProtectCommunicationGPIOs

void CPU_ProtectCommunicationGPIOs( BOOL On )
{
    NATIVE_PROFILE_PAL_COM();

    switch(ExtractTransport(HalSystemConfig.DebugTextPort))
    {
        case USART_TRANSPORT:
            CPU_USART_ProtectPins( ConvertCOM_ComPort(HalSystemConfig.DebugTextPort), On );
            return ;
        case USB_TRANSPORT:
            CPU_USB_ProtectPins  ( ConvertCOM_UsbController(HalSystemConfig.DebugTextPort), On );
            return;
        default:
            return;
    }
}

开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:16，代码来源:ComDirector.cpp

示例11: DebuggerPort_Uninitialize

BOOL DebuggerPort_Uninitialize( COM_HANDLE ComPortNum )
{
    NATIVE_PROFILE_PAL_COM();
    switch(ExtractTransport(ComPortNum))
    {
        case USART_TRANSPORT:
            return USART_Uninitialize( ConvertCOM_ComPort(ComPortNum) );
        case USB_TRANSPORT:
            USB_CloseStream( ConvertCOM_UsbStream(ComPortNum) );
            return USB_Uninitialize( ConvertCOM_UsbController(ComPortNum) );
        case SOCKET_TRANSPORT:
            return SOCKETS_Uninitialize(ConvertCOM_SockPort(ComPortNum));
    }

    return FALSE;
}

开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:16，代码来源:ComDirector.cpp

示例12: DebuggerPort_Write

int DebuggerPort_Write( COM_HANDLE ComPortNum, const char* Data, size_t size )
{
    NATIVE_PROFILE_PAL_COM();
    
    UINT32       transport = ExtractTransport(ComPortNum);
    const char*  dataTmp   = Data;
    INT32        totWrite  = 0;
    int          retries   = 100;

    while(size > 0 && retries--)
    {
        int ret = 0;
        
        switch(transport)
        {
            case USART_TRANSPORT:
                ret = USART_Write( ConvertCOM_ComPort( ComPortNum ), dataTmp, size );
                break;
            case USB_TRANSPORT:
                ret = USB_Write( ConvertCOM_UsbStream( ComPortNum ), dataTmp, size );
                break;
            case SOCKET_TRANSPORT:
                ret = SOCKETS_Write( ConvertCOM_SockPort(ComPortNum), dataTmp, size );
                break;
        }
        if(ret < 0)
        {
            break;
        }
        else if(ret == 0)
        {
            // if interrupts are off and our buffer is full then there is nothing we can do
            if(!INTERRUPTS_ENABLED_STATE()) break;

            Events_WaitForEvents(0, 1);
        }
        else
        {
            retries   = 50;   // reset retries
            size     -= ret;
            dataTmp  += ret;
            totWrite += ret;
        }
    }

    return totWrite;
}

开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:47，代码来源:ComDirector.cpp

示例13: DebuggerPort_Initialize

BOOL DebuggerPort_Initialize( COM_HANDLE ComPortNum )
{
    NATIVE_PROFILE_PAL_COM();
    switch(ExtractTransport(ComPortNum))
    {
        case USART_TRANSPORT:
            return USART_Initialize( ConvertCOM_ComPort(ComPortNum), HalSystemConfig.USART_DefaultBaudRate, USART_PARITY_NONE, 8, USART_STOP_BITS_ONE, USART_FLOW_NONE );
        case USB_TRANSPORT:
            if(USB_CONFIG_ERR_OK != USB_Configure( ConvertCOM_UsbController(ComPortNum), NULL )) return FALSE;
            if(!USB_Initialize( ConvertCOM_UsbController(ComPortNum) ))                          return FALSE;
            return USB_OpenStream( ConvertCOM_UsbStream(ComPortNum), USB_DEBUG_EP_WRITE, USB_DEBUG_EP_READ );
        case SOCKET_TRANSPORT:
            return SOCKETS_Initialize(ConvertCOM_SockPort(ComPortNum));
    }

    return FALSE;
}

开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:17，代码来源:ComDirector.cpp

示例14: SSL_ExitContext

BOOL SSL_ExitContext( INT32 sslContextHandle )
{ 
    NATIVE_PROFILE_PAL_COM();
    BOOL ret;
    
    if((sslContextHandle >= ARRAYSIZE(g_SSL_Driver.m_sslContextArray)) || (sslContextHandle < 0) || (g_SSL_Driver.m_sslContextArray[sslContextHandle].SslContext == NULL))
    {
        return FALSE;
    }

    ret = (0 == secure_sslexit(g_SSL_Driver.m_sslContextArray[sslContextHandle].SslContext));

    memset(&g_SSL_Driver.m_sslContextArray[sslContextHandle], 0, sizeof(g_SSL_Driver.m_sslContextArray[sslContextHandle]));

    g_SSL_Driver.m_sslContextCount --;

    return ret;
}

开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:18，代码来源:ssl.cpp

示例15: SSL_Uninitialize

BOOL SSL_Uninitialize()
{
    NATIVE_PROFILE_PAL_COM();
    BOOL result = TRUE;
    
    for(int i = 0; i<ARRAYSIZE(g_SSL_Driver.m_sslContextArray); i++)
    {
        if(g_SSL_Driver.m_sslContextArray[i].SslContext != NULL)
        {
            SSL_ExitContext( i );
        }
    }

    secure_exit();
        
    g_SSL_Driver.m_sslContextCount = 0;
    
    return result;
}

开发者ID:dienbk7x，项目名称:NetmfSTM32，代码行数:19，代码来源:ssl.cpp

示例16: DebuggerPort_Read

int DebuggerPort_Read( COM_HANDLE ComPortNum, char* Data, size_t size )
{
    NATIVE_PROFILE_PAL_COM();
    int ret = 0;

    switch(ExtractTransport(ComPortNum))
    {
        case USART_TRANSPORT:
            ret = USART_Read( ConvertCOM_ComPort( ComPortNum ), Data, size );
            break;
        case USB_TRANSPORT:
            ret = USB_Read( ConvertCOM_UsbStream( ComPortNum ), Data, size );
            break;
        case SOCKET_TRANSPORT:
            ret = SOCKETS_Read( ConvertCOM_SockPort(ComPortNum), Data, size );
            break;
    }

    return ret;
}

开发者ID:Sorcha，项目名称:NETMF-LPC，代码行数:20，代码来源:ComDirector.cpp

示例17: SSL_GetTime

void SSL_GetTime(DATE_TIME_INFO* pdt)
{
    NATIVE_PROFILE_PAL_COM();
    if(pdt == NULL) return;
    
    if(g_SSL_Driver.m_pfnGetTimeFuncPtr != NULL)
    {
        g_SSL_Driver.m_pfnGetTimeFuncPtr(pdt);
    }
    else
    {
       pdt->year     = 2009;
       pdt->month    = 1;
       pdt->day      = 1;
       pdt->hour     = 0;
       pdt->minute   = 0;
       pdt->second   = 0;
       pdt->msec     = 0;
       pdt->dlsTime  = 0;
       pdt->tzOffset = -8 * 60 * 60;
        
    }
}

开发者ID:dienbk7x，项目名称:NetmfSTM32，代码行数:23，代码来源:ssl.cpp

示例18: SSL_AddCertificateAuthority

BOOL SSL_AddCertificateAuthority( int sslContextHandle, const char* certificate, int cert_len, const char* szCertPwd )
{
    NATIVE_PROFILE_PAL_COM();
    SSL_Driver::SSL_Context *ctx;
    RTCertificate *rtCert;

    if((sslContextHandle >= ARRAYSIZE(g_SSL_Driver.m_sslContextArray)) || 
       (sslContextHandle < 0) || 
       (g_SSL_Driver.m_sslContextArray[sslContextHandle].m_certificateCount >= SSL_Driver::c_MaxCertificatesPerContext))
    {
        return FALSE;
    }

    ctx = &g_SSL_Driver.m_sslContextArray[sslContextHandle];

    rtCert = &ctx->m_certificates[ctx->m_certificateCount];
    ctx->m_certificateCount++;
    
    rtCert->cert = (X509Certificate)certificate;
    rtCert->size = cert_len;

    return TRUE;    
}

开发者ID:dienbk7x，项目名称:NetmfSTM32，代码行数:23，代码来源:ssl.cpp

注：本文中的NATIVE_PROFILE_PAL_COM函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。