• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ NAS_WARNING_LOG函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NAS_WARNING_LOG函数的典型用法代码示例。如果您正苦于以下问题：C++ NAS_WARNING_LOG函数的具体用法？C++ NAS_WARNING_LOG怎么用？C++ NAS_WARNING_LOG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NAS_WARNING_LOG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: NAS_RABM_ReadVoicePreferNvim

VOS_VOID NAS_RABM_ReadVoicePreferNvim(VOS_VOID)
{
    NAS_RABM_NVIM_WCDMA_VOICE_PREFER_STRU                   stVoicePreferCfg;
    VOS_UINT32                                              ulLength;

    ulLength = 0;
    PS_MEM_SET(&stVoicePreferCfg, 0x00, sizeof(NAS_RABM_NVIM_WCDMA_VOICE_PREFER_STRU));

    /* 读NV失败，认为不允许VoicePrefer */
    NV_GetLength(en_NV_Item_Wcdma_Voice_Prefer_Cfg, &ulLength);

    if (ulLength > sizeof(NAS_RABM_NVIM_WCDMA_VOICE_PREFER_STRU))
    {
        NAS_WARNING_LOG(WUEPS_PID_RABM, "NAS_RABM_ReadVoicePreferNvim:WARNING:NV_GetLength ulLength fail!");
        g_stNasRabmVoicePreferCtx.ucVoicePreferNvimEnableFlag = VOS_FALSE;
        return;
    }

    if (NV_OK != NV_Read(en_NV_Item_Wcdma_Voice_Prefer_Cfg, &stVoicePreferCfg,
                         ulLength))
    {
        NAS_WARNING_LOG(WUEPS_PID_RABM, "NAS_RABM_ReadVoicePreferNvim:WARNING:NV_Read faild!");
        g_stNasRabmVoicePreferCtx.ucVoicePreferNvimEnableFlag = VOS_FALSE;
        return;
    }

    g_stNasRabmVoicePreferCtx.ucVoicePreferNvimEnableFlag = stVoicePreferCfg.ucEnableFlag;
    g_stNasRabmVoicePreferCtx.ulNvTestMcc = stVoicePreferCfg.ulMcc;
    g_stNasRabmVoicePreferCtx.ulNvTestMnc = stVoicePreferCfg.ulMnc;

    return;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:32，代码来源:NasRabmMain.c


示例2: NAS_MMC_GetSuspendDestinationRatType

NAS_MML_NET_RAT_TYPE_ENUM_UINT8    NAS_MMC_GetSuspendDestinationRatType(
    NAS_MMC_ENTRY_MSG_STRU             *pstEntryMsg
)
{
#if   (FEATURE_ON == FEATURE_LTE)
    LMM_MMC_SUSPEND_IND_STRU           *pstLSuspendMsg      = VOS_NULL_PTR;
#endif
    RRMM_SUSPEND_IND_ST                 stGuSuspendMsg;
    NAS_MML_NET_RAT_TYPE_ENUM_UINT8     enRat;

    enRat   = NAS_MML_NET_RAT_TYPE_BUTT;

    /* 根据消息类型，转换入口消息 */
    switch (pstEntryMsg->ulEventType)
    {
        case NAS_BuildEventType(WUEPS_PID_WRR, RRMM_SUSPEND_IND):
        case NAS_BuildEventType(UEPS_PID_GAS, RRMM_SUSPEND_IND):
            stGuSuspendMsg   = *(RRMM_SUSPEND_IND_ST*)(pstEntryMsg->aucEntryMsgBuffer);
            break;

#if   (FEATURE_ON == FEATURE_LTE)
        case NAS_BuildEventType(PS_PID_MM, ID_LMM_MMC_SUSPEND_IND):
            pstLSuspendMsg   = (LMM_MMC_SUSPEND_IND_STRU*)(pstEntryMsg->aucEntryMsgBuffer);

            /* 转换L的挂起消息为GU的 */
            NAS_MMC_ConvertLmmSuspendMsgToGUtype(pstLSuspendMsg, &stGuSuspendMsg);
            break;
#endif
        default:
            NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_MMC_GetSuspendDestinationRatType:Invalid Event Type!");
            return enRat;
    }

    /* 根据挂起目的方，获取挂起前的网络类型 */
    switch(stGuSuspendMsg.ucSuspendDestination)
    {
        case MMC_SUSPEND_DESTINATION_GSM:
            enRat = NAS_MML_NET_RAT_TYPE_GSM;
            break;

        case MMC_SUSPEND_DESTINATION_WCDMA:
            enRat = NAS_MML_NET_RAT_TYPE_WCDMA;
            break;

#if (FEATURE_ON == FEATURE_LTE)
        case MMC_SUSPEND_DESTINATION_LTE:
            enRat = NAS_MML_NET_RAT_TYPE_LTE;
            break;
#endif
        default:
            NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_MMC_GetSuspendDestinationRatType:Unexpected Rat Type!");
            return enRat;
    }

    return enRat;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:56，代码来源:NasMmcProcSuspend.c


示例3: NAS_MML_InsertInternalMsgHead

VOS_VOID NAS_MML_InsertInternalMsgHead(
    VOS_VOID                           *pSndMsg
)
{
    VOS_UINT8                           ucMsgPnt;
    NAS_MML_INTERNAL_MSG_BUF_STRU      *pstMmlMsg           = VOS_NULL_PTR;
    NAS_MML_INTERNAL_MSG_QUEUE_STRU    *pstInternalMsgQueue = VOS_NULL_PTR;
    NAS_MML_INTERNAL_MSG_BUF_STRU      *pstSndMsg           = VOS_NULL_PTR;

    pstInternalMsgQueue                 = &(NAS_MML_GetMmlCtx()->stInternalMsgQueue);
    pstSndMsg                           = (NAS_MML_INTERNAL_MSG_BUF_STRU*)pSndMsg;

    /* 1. 判断内部消息缓冲区是否已满 */
    ucMsgPnt = pstInternalMsgQueue->ucTail;
    if ( ((ucMsgPnt + 1) % NAS_MML_MAX_MSG_QUEUE_SIZE) == pstInternalMsgQueue->ucHeader )
    {
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_MML_InsertInternalMsgHead:Warning: The Queue is full.");
        NAS_MMC_SndOmInternalMsgQueueInfo(VOS_TRUE, VOS_FALSE);
        NAS_MMC_SndOmInternalMsgQueueDetailInfo(pstInternalMsgQueue);
        return;
    }
    /* 2. 判断消息长度是否非法 */
    if ( pstSndMsg->ulLength > NAS_MML_MAX_INTERNAL_MSG_LEN)
    {
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_MML_InsertInternalMsgHead:Warning: ulBufLen is too long.");
        NAS_MMC_SndOmInternalMsgQueueInfo(VOS_FALSE, VOS_TRUE);
        return;
    }

    if ( (pstInternalMsgQueue->ucHeader % NAS_MML_MAX_MSG_QUEUE_SIZE) >= 1 )
    {
        pstInternalMsgQueue->ucHeader--;
        pstInternalMsgQueue->ucHeader         %= NAS_MML_MAX_MSG_QUEUE_SIZE;
    }
    else
    {
        pstInternalMsgQueue->ucHeader = NAS_MML_MAX_MSG_QUEUE_SIZE- 1;
    }

    /* 3. 取得一个消息缓冲单元 */
    pstMmlMsg = (NAS_MML_INTERNAL_MSG_BUF_STRU *)&(pstInternalMsgQueue->astNasMmMsgQueue[pstInternalMsgQueue->ucHeader]);

    NAS_NORMAL_LOG1(WUEPS_PID_MMC, "NAS_MML_InsertInternalMsgHead: usMsgID is ", pstMmlMsg->usMsgID);

    /* 4. 将内部消息发送到内部消息队列的最前面 */
    PS_MEM_CPY(pstMmlMsg, pstSndMsg, sizeof(NAS_MML_INTERNAL_MSG_BUF_STRU));

    /* 更新内部消息缓冲区 */

    return;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:51，代码来源:NasMmlMsgProc.c


示例4: TAF_MMA_ReadRoamingBrokerInfoNvim

VOS_VOID TAF_MMA_ReadRoamingBrokerInfoNvim(VOS_VOID)
{
    NAS_MMA_NVIM_ROAMING_BROKER_STRU    stRoamingBroker;
    VOS_UINT32                          ulLength;

    ulLength = 0;

    PS_MEM_SET(&stRoamingBroker, 0, sizeof(NAS_MMA_NVIM_ROAMING_BROKER_STRU));
    NV_GetLength(en_NV_Item_Roaming_Broker, &ulLength);

    if (NV_OK != NV_Read(en_NV_Item_Roaming_Broker, &stRoamingBroker, ulLength))
    {
        NAS_WARNING_LOG(WUEPS_PID_MMA, "TAF_MMA_ReadRoamingBrokerInfoNvim: Read NV Fail ");
        gstMmaValue.ucRoamBrokerSwitch = VOS_FALSE;
    }
    else
    {
        gstMmaValue.ucRoamBrokerSwitch = (stRoamingBroker.aucRoamingBroker)[0];

        /* 如果NV中的值无效，则设置RoamBroker功能关闭 */
        if ( (VOS_FALSE != (stRoamingBroker.aucRoamingBroker)[0]) && (VOS_TRUE != (stRoamingBroker.aucRoamingBroker)[0]) )
        {
            gstMmaValue.ucRoamBrokerSwitch = VOS_FALSE;
        }
    }

    return;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:28，代码来源:TafMmaProcNvim.c


示例5: NAS_UTRANCTRL_RcvTdSysCfgCnf_Main

VOS_UINT32 NAS_UTRANCTRL_RcvTdSysCfgCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_SYS_CFG_CNF_STRU              *pstSysCfgCnf;

    pstSysCfgCnf = (RRMM_SYS_CFG_CNF_STRU *)pstMsg;

    /* 如果当前UTRANCTRL模的等开机回复时状态定时器不运行认为异常 */
    if ( NAS_MMC_TIMER_STATUS_RUNING != NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_TD_SYSCFG_CNF))
    {
        /* 异常打印 */
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTdSysCfgCnf_Main: Unexpected Plmnsrch msg!");

        /* 丢弃该异常消息 */
        return VOS_TRUE;
    }

    /* 停止MMC通过UTRANCTRL模块给UTRAN模发送SYSCFG设置消息时候起的定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_SYSCFG_CNF);

    if ( RRMM_SYS_CFG_RESULT_FAILURE == pstSysCfgCnf->ulResult)
    {
        /* 若syscfg设置失败，则直接进MMC状态机进行处理 */
        return VOS_FALSE;
    }

    /* 切换到适配模块的SYSCFG状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_SYSCFG);

    /* Td的SYSCFG回复消息在适配模块的SYSCFG状态机进行处理  */
    return VOS_TRUE;
}
开发者ID:nahuelange，项目名称:yoda-kernel-H7-PLK-L01-MM，代码行数:34，代码来源:NasUtranCtrlFsmMain.c


示例6: NAS_UTRANCTRL_RcvTdStartCnf_Main

VOS_UINT32 NAS_UTRANCTRL_RcvTdStartCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_START_CNF_STRU                *pstRrStartCnfMsg;

    pstRrStartCnfMsg = (RRMM_START_CNF_STRU *)pstMsg;

    /* 如果当前UTRANCTRL模的等开机回复时状态定时器不运行认为异常 */
    if ( NAS_MMC_TIMER_STATUS_RUNING != NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_TD_START_CNF))
    {
        /* 异常打印 */
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTdStartCnf_Main: Unexpected Plmnsrch msg!");

        /* 丢弃该异常消息 */
        return VOS_TRUE;
    }

    /* 停止MMC通过UTRANCTRL模块给UTRAN模发送开机消息时候起的定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_START_CNF);

    if (MMC_START_FAILURE == pstRrStartCnfMsg->ulResult)
    {
        /* 若UTRAN模块开机失败，则直接进MMC状态机进行处理 */
        return VOS_FALSE;
    }

    /* 切换到适配模块的开机状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_SWITCH_ON);

    /* TD的开机回复消息在适配模块的开机状态机进行处理  */
    return VOS_TRUE;
}
开发者ID:nahuelange，项目名称:yoda-kernel-H7-PLK-L01-MM，代码行数:34，代码来源:NasUtranCtrlFsmMain.c


示例7: NAS_MMC_BulidResumeMsg

VOS_VOID    NAS_MMC_BulidResumeMsg(
    NAS_MML_NET_RAT_TYPE_ENUM_UINT8     enRat,
    RRMM_RESUME_IND_ST                 *pstMsg
)
{
    switch(enRat)
    {
        case NAS_MML_NET_RAT_TYPE_GSM:
            pstMsg->ucResumeOrigen = MMC_RESUME_ORIGEN_GSM;
            break;
        case NAS_MML_NET_RAT_TYPE_WCDMA:
            pstMsg->ucResumeOrigen = MMC_RESUME_ORIGEN_WCDMA;
            break;
#if (FEATURE_ON == FEATURE_LTE)
        case NAS_MML_NET_RAT_TYPE_LTE:
            pstMsg->ucResumeOrigen = MMC_RESUME_ORIGEN_LTE;
            break;
#endif
        default:
            NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_MMC_BulidResumeMsg:Unexpected Rat Type!");
            return;
    }

    pstMsg->ucCsResumeResult = MMC_RESUME_RESULT_SUCCESS;
    pstMsg->ucPsResumeResult = MMC_RESUME_RESULT_SUCCESS;

    return;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:28，代码来源:NasMmcProcSuspend.c


示例8: NAS_UTRANCTRL_RcvLmmUtranModeCnf_ModeChange_WaitSlaveModeCnf

VOS_UINT32 NAS_UTRANCTRL_RcvLmmUtranModeCnf_ModeChange_WaitSlaveModeCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_MASTER_MODE_ENUM_UINT8  enMasterMode;

    enMasterMode = NAS_UTRANCTRL_GetMasterMode_ModeChange();

    /* 如果L为主模，不处理，直接返回 */
    if (NAS_UTRANCTRL_MASTER_MODE_LTE == enMasterMode)
    {
        /* 异常打印 */
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvLmmUtranModeCnf_ModeChange_WaitSlaveModeCnf: ENTERED");

        return VOS_TRUE;
    }

    /* 收到TDRRC的UTRAN MODE CNF消息，清除等待标志 */
    NAS_UTRANCTRL_ClearWaitSlaveUtranModeCnfFlg_ModeChange(NAS_UTRANCTRL_WAIT_LMM_UTRAN_MODE_CNF);

    /* 收到从模的回复后，调用处理从模回复的函数 */
    NAS_UTRANCTRL_ProcSlaveModeCnf_ModeChange(enMasterMode);

    return VOS_TRUE;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:26，代码来源:NasUtranCtrlFsmModeChange.c


示例9: NAS_UTRANCTRL_RcvTiWaitTdPowerOffCnfExpired_PowerOff_WaitTdPowerOffCnf

VOS_UINT32 NAS_UTRANCTRL_RcvTiWaitTdPowerOffCnfExpired_PowerOff_WaitTdPowerOffCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_POWER_OFF_CNF_STRU             stNasPowerOffCnf;
    VOS_UINT32                          ulPowerOffEventType;


    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitTdPowerOffCnfExpired_PowerOff_WaitTdPowerOffCnf: ENTERED");

    /* 构造关机回复消息 */
    NAS_UTRANCTRL_BuildRrMmPowerOffCnfMsg(WUEPS_PID_WRR,
                                          WUEPS_PID_MMC,
                                          &stNasPowerOffCnf);

    ulPowerOffEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)&stNasPowerOffCnf );

    /* 将更改过的超时消息放到输出队列中 */
    NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg(ulPowerOffEventType,
                                           (struct MsgCB *)&stNasPowerOffCnf);

    /* 设置需要替换入口消息标记 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 回到main状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 当前消息进入后续MMC状态机处理 */
    return VOS_FALSE;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:32，代码来源:NasUtranCtrlFsmPowerOff.c


示例10: NAS_UTRANCTRL_RcvTiWaitTdPlmnStopCnfExpired_PlmnSelection_WaitTdPlmnStopCnf

VOS_UINT32 NAS_UTRANCTRL_RcvTiWaitTdPlmnStopCnfExpired_PlmnSelection_WaitTdPlmnStopCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;

    MSG_HEADER_STRU                    *pstMsgHeader      = VOS_NULL_PTR;
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg       = VOS_NULL_PTR;

    /* 取当前缓存的系统消息 */
    pstEntryMsg = NAS_UTRANCTRL_GetCurrEntryMsgAddr();

    /* 取得当前缓存消息的头 */
    pstMsgHeader = (MSG_HEADER_STRU *)pstEntryMsg->aucEntryMsgBuffer;


    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitTdPlmnStopCnfExpired_PlmnSelection_WaitTdPlmnStopCnf: ENTERED");


    /* 中国网络标记存在则退出当前状态机 */
    if ( (VOS_TRUE == NAS_UTRANCTRL_GetSearchedSpecTdMccFlg())
            || ( (WUEPS_PID_MMC                  == pstMsgHeader->ulSenderPid)
                 && (MMCMMC_INTER_SKIP_SEARCH_W_IND == pstMsgHeader->ulMsgName) ) )
    {

        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                WUEPS_PID_MMC,
                (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );

        /* 设置需要替换入口消息标记 */
        NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

        /* 状态机切换到MAIN */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 消息处理完成继续进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 此时需要回到W下,向TDRRC发送挂起请求 */
    NAS_UTRANCTRL_SndGuAsSuspendReq(TPS_PID_RRC);

    /* 迁移状态到等到TDRRC挂起回复 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_TD_SUSPEND_CNF_BACK_W);

    /* 启动保护定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF_LEN);

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:60，代码来源:NasUtranCtrlFsmPlmnSelection.c


示例11: NAS_MMC_SndOmSmsIndMsg

VOS_UINT32 NAS_MMC_SndOmSmsIndMsg(VOS_VOID)
{
    NAS_OM_SMS_IND_STRU                 stNasOmSmsInd;
    DIAG_TRANS_IND_STRU                 stDiagTransInd;
    VOS_UINT32                          ulRet;

    /* 初始化 */
    PS_MEM_SET(&stNasOmSmsInd, 0x00, sizeof(NAS_OM_SMS_IND_STRU));

    /* 填充消息内容 */
    NAS_SMS_BuildSmsOmInfo(&stNasOmSmsInd);
    stNasOmSmsInd.enPrimId          = ID_NAS_OM_SMS_CONFIRM;
    stNasOmSmsInd.usToolsId         = 0;

    stDiagTransInd.ulModule         = DIAG_GEN_MODULE(VOS_GetModemIDFromPid(WUEPS_PID_SMS), DIAG_MODE_UMTS);;
    stDiagTransInd.ulPid            = WUEPS_PID_SMS;
    stDiagTransInd.ulMsgId          = ((VOS_UINT32)(VOS_GetModemIDFromPid(WUEPS_PID_SMS)) << 16) + ID_NAS_OM_SMS_CONFIRM;
    stDiagTransInd.ulLength         = sizeof(NAS_OM_SMS_IND_STRU);
    stDiagTransInd.pData            = &stNasOmSmsInd;

    /* 发送消息 */
    ulRet = DIAG_TransReport(&stDiagTransInd);
    if (VOS_OK != ulRet)
    {
        NAS_WARNING_LOG(WUEPS_PID_SMS, "NAS_MMC_SndOmSmsIndMsg:WARNING: Send msg fail.");
    }

    return ulRet;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:29，代码来源:smsmain.c


示例12: NAS_UTRANCTRL_RcvTiWaitWasStartCnfExpired_SwitchOn_WaitWasStartCnf

VOS_UINT32  NAS_UTRANCTRL_RcvTiWaitWasStartCnfExpired_SwitchOn_WaitWasStartCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_START_CNF_STRU                *pstRrMmStartCnfMsg;
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg;

    pstEntryMsg        = NAS_UTRANCTRL_GetCurrEntryMsgAddr();
    pstRrMmStartCnfMsg = (RRMM_START_CNF_STRU *)pstEntryMsg->aucEntryMsgBuffer;

    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitWasStartCnfExpired_SwitchOn_WaitWasStartCnf: ENTERED");

    /* 认为当前开机失败 */
    pstRrMmStartCnfMsg->ulResult = MMC_START_FAILURE;

    /* 将当前开机失败消息放到输出队列中 */
    NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg(pstEntryMsg->ulEventType, (struct MsgCB *)pstEntryMsg->aucEntryMsgBuffer);

    /* 设置需要替换入口消息标记，这样MMC模块就会处理开机回复失败消息 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* UTRANCTRL状态机回到MAIN状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 消息未被处理完成需MMC继续处理 */
    return VOS_FALSE;
}
开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:29，代码来源:NasUtranCtrlFsmSwitchOn.c


示例13: NAS_UTRANCTRL_RcvTiWaitMasterModeCnfExpired_ModeChange_WaitMasterModeCnf

VOS_UINT32 NAS_UTRANCTRL_RcvTiWaitMasterModeCnfExpired_ModeChange_WaitMasterModeCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg;

    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitMasterModeCnfExpired_ModeChange_WaitMasterModeCnf: ENTERED");

    /* 清除所有等待模式变更回复的标志 */
    NAS_UTRANCTRL_ClearAllWaitAsUtranModeCnfFlg_ModeChange();

    /* 取当前缓存的系统消息 */
    pstEntryMsg = NAS_UTRANCTRL_GetCurrEntryMsgAddr();
    NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg( pstEntryMsg->ulEventType,
                                     (struct MsgCB *)pstEntryMsg->aucEntryMsgBuffer);

    /* 设置缓存消息有效标志 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 退出MODE CHANGE状态机，切换到MAIN状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    return VOS_FALSE;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:26，代码来源:NasUtranCtrlFsmModeChange.c


示例14: NAS_UTRANCTRL_SaveCurEntryMsg

VOS_VOID NAS_UTRANCTRL_SaveCurEntryMsg(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg  = VOS_NULL_PTR;

    MSG_HEADER_STRU                    *pstMsgHeader = VOS_NULL_PTR;
    VOS_UINT32                          ulLen;

    /* 获得当前UTRANCTRL模块状态机入口消息的缓冲区地址 */
    pstEntryMsg                 = NAS_UTRANCTRL_GetCurrEntryMsgAddr();
    pstMsgHeader                = (MSG_HEADER_STRU*)pstMsg;

    /* 如果是空消息 */
    if ( VOS_NULL_PTR == pstMsg )
    {
        pstEntryMsg->ulEventType    =   ulEventType;
        NAS_WARNING_LOG( WUEPS_PID_MMC, "NAS_MMC_SaveCurEntryMsg Entry Message Pointer is NULL!" );
        return;
    }

    ulLen                       = pstMsgHeader->ulLength + VOS_MSG_HEAD_LENGTH;

    /* 将当前处理的入口消息拷贝到Context对应的缓冲区 */
    PS_MEM_CPY( pstEntryMsg->aucEntryMsgBuffer, pstMsg, ulLen );

    /* 填写Context中的参数 */
    pstEntryMsg->ulEventType    =   ulEventType;

    return;

}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:33，代码来源:NasUtranCtrlCtx.c


示例15: NAS_MMC_RcvMmcAbortFsmMsg_InterSysOos_WaitAsResumeInd

VOS_UINT32  NAS_MMC_RcvMmcAbortFsmMsg_InterSysOos_WaitAsResumeInd(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 停止TI_NAS_MMC_WAIT_AS_RESUME_IND */
    NAS_MMC_StopTimer(TI_NAS_MMC_WAIT_AS_RESUME_IND);

    /* 向当前AS发送 RRMM_SUSPEND_REL_REQ */
    if ( NAS_MML_NET_RAT_TYPE_WCDMA == NAS_MML_GetCurrNetRatType())
    {
        NAS_MMC_SndAsSuspendRelReq(WUEPS_PID_WRR);
    }
    else
    {
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_MMC_RcvMmcAbortFsmMsg_InterSysOos_WaitAsResumeInd:could not support current rat!");

        return VOS_FALSE;
    }

    /* 迁移状态到等待SUSPEND_REL_CNF */
    NAS_MMC_FSM_SetCurrState(NAS_MMC_INTER_SYS_OOS_STA_WAIT_WAS_SUSPEND_REL_CNF);

    NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_WAS_SUSPEND_REL_CNF, TI_NAS_MMC_WAIT_WAS_SUSPEND_REL_CNF_LEN);

    return VOS_TRUE;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:27，代码来源:NasMmcFsmInterSysOos.c


示例16: NAS_UTRANCTRL_RcvTiTdSysCfgCnfExpired_SysCfg_WaitTdSysCfgCnf

VOS_UINT32 NAS_UTRANCTRL_RcvTiTdSysCfgCnfExpired_SysCfg_WaitTdSysCfgCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_SYS_CFG_CNF_STRU              *pstSysCfgCnfMsg;
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg;

    pstEntryMsg     = NAS_UTRANCTRL_GetCurrEntryMsgAddr();
    pstSysCfgCnfMsg = (RRMM_SYS_CFG_CNF_STRU *)pstEntryMsg->aucEntryMsgBuffer;

    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTdSysCfgCnfExpired_SysCfg_WaitTdSysCfgCnf: ENTERED");

    /* 认为当前SYSCFG设置失败 */
    pstSysCfgCnfMsg->ulResult = RRMM_SYS_CFG_RESULT_FAILURE;

    /* 将SYSCFG设置失败消息放到输出队列中 */
    NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg(pstEntryMsg->ulEventType, (struct MsgCB *)pstEntryMsg->aucEntryMsgBuffer);

    /* 设置需要替换入口消息标记，这样MMC模块就会处理SYSCFG设置失败消息 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 回到main状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 当前消息进入后续MMC状态机处理 */
    return VOS_FALSE;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:29，代码来源:NasUtranCtrlFsmSyscfg.c


示例17: NAS_UTRANCTRL_RcvTiWaitWasPlmnSearchCnfExpired_Main

VOS_UINT32 NAS_UTRANCTRL_RcvTiWaitWasPlmnSearchCnfExpired_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;
    NAS_UTRANCTRL_UTRAN_MODE_ENUM_UINT8 enUtranMode;

    enUtranMode     = NAS_UTRANCTRL_GetCurrUtranMode();

    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitWasPlmnSearchCnfExpired_Main: ENTERED");

    /* CSFB标志存在时，并且当前是FDD模式，不再搜TD */
    if ((VOS_TRUE                       == NAS_MML_IsCsfbServiceStatusExist())
     && (NAS_UTRANCTRL_UTRAN_MODE_FDD   == enUtranMode))
    {
        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                                                        WUEPS_PID_MMC,
                                                       (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );

        /* 设置需要替换入口消息标记 */
        NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

        /* 当前消息进入后续MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 如果当前为UTRAN MODE AUTO SWITCH模式，则需要启动UTRANCTRL模块的搜网状态机 */
    if ( NAS_UTRANCTRL_UTRAN_SWITCH_MODE_AUTO == NAS_UTRANCTRL_GetCurUtranSwitchMode() )
    {
        /* 切换到适配模块的选网状态机进行处理 */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_PLMN_SELECTION);

        /* 进入适配层选网状态机处理  */
        return VOS_TRUE;
    }

    /* 构造指定搜网回复失败消息到内存的缓存区域 */
    NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                                                    WUEPS_PID_MMC,
                                                   (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

    /* 保存构造指定搜网回复失败消息事件类型 */
    pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );

    /* 设置需要替换入口消息标记 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 当前消息进入后续MMC状态机处理 */
    return VOS_FALSE;
}
开发者ID:nahuelange，项目名称:yoda-kernel-H7-PLK-L01-MM，代码行数:59，代码来源:NasUtranCtrlFsmMain.c


示例18: NAS_CC_SendMmccPrim

LOCAL VOS_VOID  NAS_CC_SendMmccPrim(
    VOS_VOID                            *pMsg
)
{
    if (VOS_OK != PS_SEND_MSG(WUEPS_PID_CC, pMsg))
    {
        NAS_WARNING_LOG(WUEPS_PID_CC, "NAS_CC_SendMmccPrim():WARNING:SEND MSG FIAL");
    }
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:9，代码来源:NasCcMmccSend.c


示例19: NAS_RABM_RcvSysModeChgInd

VOS_VOID NAS_RABM_RcvSysModeChgInd(
    GMM_RABM_NET_RAT_ENUM_UINT32        enNewSysMode
)
{
    NAS_RABM_PROC_FUNC_TBL_STRU        *pstProcFuncTbl;
    GMM_RABM_NET_RAT_ENUM_UINT32        enOldSysMode;

    /* 判断当前的系统模式是否有效 */
    enOldSysMode = NAS_RABM_GetCurrentSysMode();

    /* 检测系统模式有效性, 若无效, 不更新系统模式 */
    if (NAS_MML_NET_RAT_TYPE_BUTT == enNewSysMode)
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvSysModeChgInd: Invalid System Mode.");
        return;
    }

    /* 更新系统模式 */
    NAS_RABM_SetSysMode(enNewSysMode);

    /* 根据当前系统模式获取对应的处理函数表的指针 */
    pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enOldSysMode);

    /* 确认函数处理表已经注册 */
    if (VOS_NULL_PTR != pstProcFuncTbl)
    {
        if (VOS_NULL_PTR != pstProcFuncTbl->pSysModeChgIndProcFunc)
        {
            /* 调用对应模式的处理函数 */
            pstProcFuncTbl->pSysModeChgIndProcFunc(enOldSysMode, enNewSysMode);
        }
        else
        {
            NAS_WARNING_LOG(WUEPS_PID_RABM,
                            "NAS_RABM_RcvSysModeChgInd: pDataResumeIndProcFunc is not registered.");
        }
    }
    else
    {
        NAS_WARNING_LOG(WUEPS_PID_RABM,
                        "NAS_RABM_RcvSysModeChgInd: Message is received in wrong system mode.");
    }
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:44，代码来源:NasRabmMain.c


示例20: NAS_RABM_MsgProc

VOS_VOID NAS_RABM_MsgProc(
    struct MsgCB                       *pMsg
)
{
    MSG_HEADER_STRU                    *pstMsg;
    struct MsgCB                       *pstDestMsg;


    pstDestMsg = VOS_NULL_PTR;

    /* 入口消息非空检查 */
    if (VOS_NULL_PTR == pMsg)
    {
        NAS_WARNING_LOG(WUEPS_PID_RABM,
                        "NAS_RABM_MsgProc: Message is NULL.");
        return;
    }

    /* 支持TD-SCDMA特性时，需对消息进行适配处理，将TD模的发送PID适配为W模的PID */
    if ( VOS_TRUE == NAS_UTRANCTRL_MsgProc(pMsg, &pstDestMsg) )
    {
        /* 消息在UTRANCTRL模块处理完成，直接返回，不进入后续处理 */
        return;
    }

    /* 替换消息指针 */
    pstMsg = (MSG_HEADER_STRU*)pstDestMsg;

    /* 处理消息 */
    switch (pstMsg->ulSenderPid)
    {
    case WUEPS_PID_SM:
        NAS_RABM_RcvSmMsg(pstDestMsg);
        break;

    case WUEPS_PID_GMM:
        NAS_RABM_RcvGmmMsg(pstDestMsg);
        break;

    case WUEPS_PID_AT:
        NAS_RABM_RcvAtMsg(pstDestMsg);
        break;

    case UEPS_PID_CDS:
        NAS_RABM_RcvCdsMsg(pstDestMsg);
        break;
#if (FEATURE_ON == FEATURE_BASTET)
    case UEPS_PID_BASTET:
        NAS_RABM_RcvBastetMsg(pstDestMsg);
        break;
#endif
    default:
        NAS_RABM_RcvCommMsg(pstDestMsg);
        break;
    }
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:56，代码来源:NasRabmMain.c



注：本文中的NAS_WARNING_LOG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ NAString函数代码示例发布时间：2022-05-30
下一篇：
C++ NAS_UTRANCTRL_GetUtranCtrlCtx函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap