• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ NAS_ERROR_LOG函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NAS_ERROR_LOG函数的典型用法代码示例。如果您正苦于以下问题:C++ NAS_ERROR_LOG函数的具体用法?C++ NAS_ERROR_LOG怎么用?C++ NAS_ERROR_LOG使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NAS_ERROR_LOG函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: NAS_MMC_RcvLmmSysCfgCnfExpired_SysCfg_WaitLmmSysCfgCnf

VOS_UINT32  NAS_MMC_RcvLmmSysCfgCnfExpired_SysCfg_WaitLmmSysCfgCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_MML_PLMN_RAT_PRIO_STRU         *pstPrePrioRatList;

    /* 打印定时器超时异常LOG */
    NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_RcvLmmSysCfgCnfExpired_SysCfg_WaitLmmSysCfgCnf():TI_NAS_MMC_WAIT_LMM_SYSCFG_CNF timeout");

    /* 向MMA回复SYSCFG设置失败 */
    NAS_MMC_SndMmaSysCfgCnf(MMA_MMC_SYS_CFG_SET_FAILURE_OTHER);

    /* syscfg设置失败需要恢复之前的接入技术和优先级 */
    pstPrePrioRatList = NAS_MMC_GetPrePrioRatList_SysCfg();

    NAS_MML_SetMsSysCfgPrioRatList(pstPrePrioRatList);

    /* 通知上层状态机SYSCFG状态机运行结果,syscfg设置失败 */
    NAS_MMC_SndSysCfgRslt(VOS_FALSE, VOS_FALSE);

    /* 退出SYSCFG状态机 */
    NAS_MMC_FSM_QuitFsmL2();

    return VOS_TRUE;
}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:26,代码来源:NasMmcFsmSyscfg.c


示例2: NAS_MMC_SndMmCoverageLostInd

VOS_VOID  NAS_MMC_SndMmCoverageLostInd(VOS_VOID)
{

    MMCMM_COVERAGE_LOST_IND_STRU       *pstSndMsg           = VOS_NULL_PTR;

    /* 从内部消息队列中获取一个还没有使用的空间 */
    pstSndMsg       = (MMCMM_COVERAGE_LOST_IND_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_COVERAGE_LOST_IND_STRU));
    if ( VOS_NULL_PTR == pstSndMsg)
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC,"NAS_MMC_SndMmCoverageLostInd:ERROR: Memory Alloc Error for pMsg");
        return;
    }

    pstSndMsg->MsgHeader.ulSenderCpuId     = VOS_LOCAL_CPUID;
    pstSndMsg->MsgHeader.ulSenderPid       = WUEPS_PID_MMC;
    pstSndMsg->MsgHeader.ulReceiverCpuId   = VOS_LOCAL_CPUID;
    pstSndMsg->MsgHeader.ulReceiverPid     = WUEPS_PID_MM;
    pstSndMsg->MsgHeader.ulLength
        = sizeof(MMCMM_COVERAGE_LOST_IND_STRU) - VOS_MSG_HEAD_LENGTH;

    /* 填写消息类别 */
    pstSndMsg->MsgHeader.ulMsgName   = MMCMM_COVERAGE_LOST_IND;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstSndMsg);

    return;

}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:29,代码来源:NasMmcSndMm.c


示例3: NAS_MMC_SndMmPlmnSchInit

VOS_VOID  NAS_MMC_SndMmPlmnSchInit(VOS_VOID)
{
    /*向MM发送挂起指示,定义原语类型指针 */
    MMCMM_PLMN_SEARCH_INITIATED_STRU   *pstSndMsg = VOS_NULL_PTR;

    /* 从内部消息队列中获取一个还没有使用的空间 */
    pstSndMsg       = (MMCMM_PLMN_SEARCH_INITIATED_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_PLMN_SEARCH_INITIATED_STRU));
    if ( VOS_NULL_PTR == pstSndMsg)
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndMmPlmnSchInit:ALLOC MEM ERROR!");
        return;
    }

    pstSndMsg->MsgHeader.ulSenderCpuId     = VOS_LOCAL_CPUID;
    pstSndMsg->MsgHeader.ulSenderPid       = WUEPS_PID_MMC;
    pstSndMsg->MsgHeader.ulReceiverCpuId   = VOS_LOCAL_CPUID;
    pstSndMsg->MsgHeader.ulReceiverPid     = WUEPS_PID_MM;
    pstSndMsg->MsgHeader.ulLength
        = sizeof(MMCMM_PLMN_SEARCH_INITIATED_STRU) - VOS_MSG_HEAD_LENGTH;

    /* 填写消息类别 */
    pstSndMsg->MsgHeader.ulMsgName         = MMCMM_PLMN_SEARCH_INITIATED;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstSndMsg);

    return;
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:28,代码来源:NasMmcSndMm.c


示例4: NAS_MMC_SndMmLmmTimerStateNotify

VOS_VOID  NAS_MMC_SndMmLmmTimerStateNotify(
    LMM_MMC_TIMER_STATE_NOTIFY_STRU    *pstTimerStatusNotify
)
{
    MMCMM_LMM_TIMER_STATE_NOTIFY_STRU  *pstMsg = VOS_NULL_PTR;

    /* 申请消息内存分配 */
    pstMsg              = (MMCMM_LMM_TIMER_STATE_NOTIFY_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_LMM_TIMER_STATE_NOTIFY_STRU));

    if ( VOS_NULL_PTR == pstMsg)
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndMmLmmTimerStatusNotify,ERROR:ALLOC BUFFER WRONG!");
        return;
    }

    /* 消息IE项赋值 */
    PS_MEM_CPY(pstMsg, pstTimerStatusNotify, sizeof(MMCMM_LMM_TIMER_STATE_NOTIFY_STRU));

    /* 修改消息头 */
    pstMsg->ulLength        = sizeof(MMCMM_LMM_TIMER_STATE_NOTIFY_STRU)
                                       -VOS_MSG_HEAD_LENGTH;
    pstMsg->ulSenderCpuId   = VOS_LOCAL_CPUID;
    pstMsg->ulSenderPid     = WUEPS_PID_MMC;
    pstMsg->ulReceiverCpuId = VOS_LOCAL_CPUID;
    pstMsg->ulReceiverPid   = WUEPS_PID_MM;
    pstMsg->ulMsgId         = MMCMM_LMM_TIMER_STATE_NOTIFY;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstMsg);

    return;
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:32,代码来源:NasMmcSndMm.c


示例5: NAS_MMC_SndMmRelReq

VOS_VOID NAS_MMC_SndMmRelReq(VOS_VOID)
{
    /* 向MM发送CS信令链接释放消息 */
    MMCMM_REL_REQ_STRU                 *pstSndMmRelMsg      = VOS_NULL_PTR;

    pstSndMmRelMsg  = (MMCMM_REL_REQ_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_REL_REQ_STRU));
    if ( VOS_NULL_PTR == pstSndMmRelMsg)
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndMmRelReq,ERROR:ALLOC BUFFER WRONG!");
        return;
    }

    pstSndMmRelMsg->MsgHeader.ulSenderCpuId     = VOS_LOCAL_CPUID;
    pstSndMmRelMsg->MsgHeader.ulSenderPid       = WUEPS_PID_MMC;
    pstSndMmRelMsg->MsgHeader.ulReceiverCpuId   = VOS_LOCAL_CPUID;
    pstSndMmRelMsg->MsgHeader.ulReceiverPid     = WUEPS_PID_MM;

    /* 填写消息类别 */
    pstSndMmRelMsg->MsgHeader.ulMsgName         = MMCMM_REL_REQ;
    pstSndMmRelMsg->MsgHeader.ulLength          = sizeof(MMCMM_REL_REQ_STRU) - VOS_MSG_HEAD_LENGTH;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstSndMmRelMsg);
    return;
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:25,代码来源:NasMmcSndMm.c


示例6: NAS_MMC_SndGmmLteSysinfoInd

VOS_VOID NAS_MMC_SndGmmLteSysinfoInd(
    LMM_MMC_SYS_INFO_IND_STRU          *pstLmmSysInfoMsg
)
{
    /* 定义原语类型指针 */
    MMC_GMM_LTE_SYS_INFO_IND_STRU      *pstMsg = VOS_NULL_PTR;

    pstMsg          = (MMC_GMM_LTE_SYS_INFO_IND_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMC_GMM_LTE_SYS_INFO_IND_STRU));
    if ( VOS_NULL_PTR == pstMsg)
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC,"NAS_MMC_SndGmmLteSysinfoInd:Alloc Mem Failed");
        return;
    }

    /* 消息IE项赋值 */
    PS_MEM_CPY(pstMsg, pstLmmSysInfoMsg, sizeof(MMC_GMM_LTE_SYS_INFO_IND_STRU));

    pstMsg->ulSenderCpuId     = VOS_LOCAL_CPUID;
    pstMsg->ulSenderPid       = WUEPS_PID_MMC;
    pstMsg->ulReceiverCpuId   = VOS_LOCAL_CPUID;
    pstMsg->ulReceiverPid     = WUEPS_PID_GMM;
    pstMsg->ulMsgId           = MMCGMM_LTE_SYS_INFO_IND;
    pstMsg->ulLength          = sizeof(MMC_GMM_LTE_SYS_INFO_IND_STRU) - VOS_MSG_HEAD_LENGTH;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstMsg);

    return ;
}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:29,代码来源:NasMmcSndGmm.c


示例7: NAS_MMC_SndGmmRelReq

VOS_VOID NAS_MMC_SndGmmRelReq(VOS_VOID)
{
    /* 向GMM发送PS信令链接释放消息 */
    MMCGMM_REL_REQ_STRU                *pstSndGmmRelMsg     = VOS_NULL_PTR;

    /* 从内部消息队列中获取一个还没有使用的空间 */
    pstSndGmmRelMsg = (MMCGMM_REL_REQ_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCGMM_REL_REQ_STRU));
    if ( VOS_NULL_PTR == pstSndGmmRelMsg )
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndGmmRelReq:ALLOC MEM ERROR!");
        return;
    }

    pstSndGmmRelMsg->MsgHeader.ulSenderCpuId     = VOS_LOCAL_CPUID;
    pstSndGmmRelMsg->MsgHeader.ulSenderPid       = WUEPS_PID_MMC;
    pstSndGmmRelMsg->MsgHeader.ulReceiverCpuId   = VOS_LOCAL_CPUID;
    pstSndGmmRelMsg->MsgHeader.ulReceiverPid     = WUEPS_PID_GMM;

    /* 填写消息类别 */
    pstSndGmmRelMsg->MsgHeader.ulMsgName         = MMCGMM_REL_REQ;
    pstSndGmmRelMsg->MsgHeader.ulLength          = sizeof(MMCGMM_REL_REQ_STRU) - VOS_MSG_HEAD_LENGTH;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstSndGmmRelMsg);

    return;

}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:28,代码来源:NasMmcSndGmm.c


示例8: NAS_MMC_SndGmmLmmAttachInd

VOS_VOID  NAS_MMC_SndGmmLmmAttachInd(
    LMM_MMC_ATTACH_IND_STRU        *pstAttachInd
)
{
    MMCGMM_LMM_ATTACH_IND_STRU         *pstMsg = VOS_NULL_PTR;

    pstMsg              = (MMCGMM_LMM_ATTACH_IND_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCGMM_LMM_ATTACH_IND_STRU));

    if ( VOS_NULL_PTR == pstMsg)
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndGmmLmmAttachInd,ERROR:ALLOC BUFFER WRONG!");
        return;
    }

    /* 消息IE项赋值 */
    PS_MEM_CPY(pstMsg, pstAttachInd, sizeof(MMCGMM_LMM_ATTACH_IND_STRU));

    /* 修改消息头 */
    pstMsg->ulLength        = sizeof(MMCGMM_LMM_ATTACH_IND_STRU)
                                       -VOS_MSG_HEAD_LENGTH;
    pstMsg->ulSenderCpuId   = VOS_LOCAL_CPUID;
    pstMsg->ulSenderPid     = WUEPS_PID_MMC;
    pstMsg->ulReceiverCpuId = VOS_LOCAL_CPUID;
    pstMsg->ulReceiverPid   = WUEPS_PID_GMM;
    pstMsg->ulMsgId         = MMCGMM_LMM_ATTACH_IND;

    /* 内部消息的发送 */
    NAS_MML_SndInternalMsg(pstMsg);

    return;
}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:31,代码来源:NasMmcSndGmm.c


示例9: NAS_ERROR_LOG

NAS_MML_INTERNAL_MSG_BUF_STRU *NAS_MML_GetIntMsgSendBuf(
    VOS_UINT32                          ulLen
)
{
    NAS_MML_INTERNAL_MSG_BUF_STRU      *pstNasMmlMsg        = VOS_NULL_PTR;
    NAS_MML_INTERNAL_MSG_QUEUE_STRU    *pstInternalMsgQueue = VOS_NULL_PTR;

    pstInternalMsgQueue         = &(NAS_MML_GetMmlCtx()->stInternalMsgQueue);

    /* 从上下文中获取消息缓冲区指针 */
    pstNasMmlMsg = ( NAS_MML_INTERNAL_MSG_BUF_STRU *)&(pstInternalMsgQueue->stSendMsgBuf);

    if ( ulLen > NAS_MML_MAX_INTERNAL_MSG_LEN )
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MML_GetIntMsgSendBuf: Buffer full" );
        NAS_MMC_SndOmInternalMsgQueueInfo(VOS_FALSE, VOS_TRUE);
        return VOS_NULL_PTR;
    }

    /* 清空这个消息缓冲单元 */
    PS_MEM_SET(pstNasMmlMsg, 0x00, sizeof(NAS_MML_INTERNAL_MSG_BUF_STRU));

    /* 返回缓冲区指针 */
    return pstNasMmlMsg;
}
开发者ID:XePeleato,项目名称:android_kernel_huawei_venus,代码行数:25,代码来源:NasMmlMsgProc.c


示例10: NAS_SM_SndRabmBearerModifyInd

VOS_UINT32 NAS_SM_SndRabmBearerModifyInd(
    VOS_UINT8                           ucNsapi,
    NAS_SM_PDP_CONTEXT_INFO_STRU       *pstPdpCtxInfo
)
{
    SM_RABM_BEARER_MODIFY_IND_STRU     *pstBearerModifyInd;

    /* 构造消息 */
    pstBearerModifyInd = (SM_RABM_BEARER_MODIFY_IND_STRU*)PS_ALLOC_MSG_WITH_HEADER_LEN(
                            WUEPS_PID_SM,
                            sizeof(SM_RABM_BEARER_MODIFY_IND_STRU));
    if (VOS_NULL_PTR == pstBearerModifyInd)
    {
        NAS_ERROR_LOG(WUEPS_PID_SM,
            "NAS_SM_SndRabmBearerModifyInd: Memory alloc failed.");
        return VOS_ERR;
    }

    /* 初始化消息 */
    PS_MEM_SET((VOS_CHAR*)pstBearerModifyInd + VOS_MSG_HEAD_LENGTH,
               0x00,
               sizeof(SM_RABM_BEARER_MODIFY_IND_STRU) - VOS_MSG_HEAD_LENGTH);

    /* 填写消息头 */
    pstBearerModifyInd->stMsgHeader.ulReceiverCpuId = VOS_LOCAL_CPUID;
    pstBearerModifyInd->stMsgHeader.ulReceiverPid   = WUEPS_PID_RABM;
    pstBearerModifyInd->stMsgHeader.ulMsgName       = ID_SM_RABM_BEARER_MODIFY_IND;

    /* 填写消息内容 */
    pstBearerModifyInd->ulNsapi         = ucNsapi;
    pstBearerModifyInd->stQos.ulLength  = pstPdpCtxInfo->QoS.ulQosLength;

    PS_MEM_CPY(pstBearerModifyInd->stQos.aucQosValue,
               pstPdpCtxInfo->QoS.aucQosValue,
               pstPdpCtxInfo->QoS.ulQosLength);

    /* 发送消息 */
    if (VOS_OK != PS_SEND_MSG(WUEPS_PID_SM, pstBearerModifyInd))
    {
        NAS_ERROR_LOG(WUEPS_PID_SM,
            "NAS_SM_SndRabmBearerModifyInd: Send message failed.");
        return VOS_ERR;
    }

    return VOS_OK;

}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:47,代码来源:NasSmMultiMode.c


示例11: MN_CALL_CsMtCallFailRecord

VOS_VOID MN_CALL_CsMtCallFailRecord(
    NAS_ERR_LOG_CS_MT_CALL_CAUSE_ENUM_U32   enCause
)
{
    NAS_ERR_LOG_CS_MT_CALL_FAIL_EVENT_STRU  stCsMtCallFailEvt;
    VOS_UINT32                              ulLength;
    VOS_UINT16                              usLevel;
    VOS_UINT32                              ulIsLogRecord;
    VOS_UINT32                              ulResult;

    /* 查询对应Alarm Id是否需要记录异常信息 */
    usLevel       = NAS_GetErrLogAlmLevel(NAS_ERR_LOG_ALM_CS_MT_CALL_FAIL);
    ulIsLogRecord = TAF_SDC_IsErrLogNeedRecord(usLevel);

    /* 模块异常不需要记录或异常原因值不需要记录时,不保存异常信息 */
    if (VOS_FALSE == ulIsLogRecord)
    {
        return;
    }

    ulLength = sizeof(NAS_ERR_LOG_CS_MT_CALL_FAIL_EVENT_STRU);

    /* 填充CS PAGING失败异常信息 */
    PS_MEM_SET(&stCsMtCallFailEvt, 0x00, ulLength);

    NAS_COMM_BULID_ERRLOG_HEADER_INFO(&stCsMtCallFailEvt.stHeader,
                                      VOS_GetModemIDFromPid(WUEPS_PID_TAF),
                                      NAS_ERR_LOG_ALM_CS_MT_CALL_FAIL,
                                      usLevel,
                                      VOS_GetSlice(),
                                      (ulLength - sizeof(OM_ERR_LOG_HEADER_STRU)));

    /* 获取当前位置信息 */
    NAS_MNTN_OutputPositionInfo(&stCsMtCallFailEvt.stPositionInfo);

    /* 填写错误原因值 */
    stCsMtCallFailEvt.enCause = enCause;

    /* 将CS MT CALL失败信息发送给ACPU OM模块 */
    TAF_SndAcpuOmFaultErrLogInd(&stCsMtCallFailEvt, ulLength);

    /*
       将异常信息写入Buffer中
       实际写入的字符数与需要写入的不等则打印异常
     */
    ulResult = TAF_SDC_PutErrLogRingBuf((VOS_CHAR *)&stCsMtCallFailEvt, ulLength);
    if (ulResult != ulLength)
    {
        NAS_ERROR_LOG(WUEPS_PID_TAF, "MN_CALL_SndAcpuOmCsMtCallFailInd(): Push buffer error.");
    }

    /* 可维可测勾包 */
    NAS_COM_MntnPutRingbuf(NAS_ERR_LOG_ALM_CS_MT_CALL_FAIL,
                           WUEPS_PID_TAF,
                           (VOS_UINT8 *)&stCsMtCallFailEvt,
                           sizeof(stCsMtCallFailEvt));

    return;
}
开发者ID:magnusjjj,项目名称:android_kernel_huawei_rle,代码行数:59,代码来源:MnCall.c


示例12: NAS_SM_RcvTafBearerModifyInd

VOS_VOID NAS_SM_RcvTafBearerModifyInd(
    SMREG_BEARER_MODIFY_IND_STRU       *pstBearerModifyInd
)
{
    NAS_SM_PDP_CONTEXT_INFO_STRU       *pstPdpCtxInfo;
    VOS_UINT8                           ucPdpCtxIndex;
    VOS_UINT8                           ucTi;
    VOS_UINT8                           ucNsapi;

    /*----------------------------------------------------------------
       提取TI: 根据TiFlag决定TI的取值范围, 以网侧下发TI为准
               若TiFlag为TRUE(SM_TI_MS_ORG), TI取值区间[128, 254]
               若TiFlag为FALSE(SM_TI_NET_ORG), TI取值区间[0, 127]
    ----------------------------------------------------------------*/
    ucTi = (VOS_FALSE == pstBearerModifyInd->stTransId.ucTiFlag) ?
           (pstBearerModifyInd->stTransId.ucTiValue) :
           (pstBearerModifyInd->stTransId.ucTiValue + 0x80);


    /* 获取TI对应的PDP CONTEXT索引 */
    ucPdpCtxIndex = NAS_SM_GetNsapiFromTiMap(ucTi);

    /* 检查是否存在和TI和CR对应的PDP CONTEXT */
    if (0xFF == ucPdpCtxIndex)
    {
        NAS_ERROR_LOG(WUEPS_PID_SM,
            "NAS_SM_RcvTafBearerModifyInd: NSAPI is not used.");
        return;
    }

    /* 获取PDP CONTEXT索引对应的NSAPI: NSAPI = PDP_INDEX - NSAPI_OFFSET(5) */
    ucNsapi         = ucPdpCtxIndex + SM_NSAPI_OFFSET;

    /* 获取当前PDP CONTEXT内容地址 */
    pstPdpCtxInfo = NAS_SM_GetPdpCtxInfoAddr(ucPdpCtxIndex);

    /* 更新RADIO PRIORITY */
    if (VOS_TRUE == pstBearerModifyInd->bitOpRadioPriority)
    {
        pstPdpCtxInfo->ucRadioPri = pstBearerModifyInd->ucRadioPriority;
    }

    /* 更新QOS信息 */
    if (VOS_TRUE == pstBearerModifyInd->bitOpPdpQos)
    {
        pstPdpCtxInfo->QoS.ulQosLength = pstBearerModifyInd->stNegQos.ulQosLen;

        PS_MEM_CPY(pstPdpCtxInfo->QoS.aucQosValue,
                   pstBearerModifyInd->stNegQos.aucQos,
                   NAS_SM_MAX_QOS_LEN);
    }

    /* 通知RABM更新状态 */
    NAS_SM_SndRabmBearerModifyInd(ucNsapi, pstPdpCtxInfo);

    /* 通知GMM pdp上下文发生修改,GMM根据此消息需判断是否要去激活ISR */
    NAS_SM_SndGmmPdpModifyInd(ucNsapi);
}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:58,代码来源:NasSmMultiMode.c


示例13: NAS_MMC_SetRatModeSysCfgReq_SysCfg

VOS_VOID NAS_MMC_SetRatModeSysCfgReq_SysCfg(
    NAS_MML_NET_RAT_TYPE_ENUM_UINT8     enCurrRat,
    MMA_MMC_SYS_CFG_SET_REQ_STRU        *pstSysCfgMsg
)
{
    /* 根据接入模式,进行SYSCFG的设置 */
    switch ( enCurrRat )
    {

#if (FEATURE_ON == FEATURE_LTE)
        case NAS_MML_NET_RAT_TYPE_LTE:

            /* 向L模下发SYSCFG设置请求 */
            NAS_MMC_SndLmmSyscfgReq(pstSysCfgMsg);
            NAS_MMC_AddSysCfgIndex_SysCfg();

            /* 进行SYSCFG状态机的子状态的迁移 */
            NAS_MMC_FSM_SetCurrState(NAS_MMC_SYSCFG_STA_WAIT_LMM_SYSCFG_CNF);

            /* 启动等待回复定时器 */
            NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_LMM_SYSCFG_CNF, TI_NAS_MMC_WAIT_LMM_SYSCFG_CNF_LEN);
            break;
#endif

        case NAS_MML_NET_RAT_TYPE_WCDMA:

            /* 向W模下发SYSCFG设置请求 */
            NAS_MMC_SndAsSyscfgReq(pstSysCfgMsg, WUEPS_PID_WRR);
            NAS_MMC_AddSysCfgIndex_SysCfg();

            /* 进行SYSCFG状态机的子状态的迁移 */
            NAS_MMC_FSM_SetCurrState(NAS_MMC_SYSCFG_STA_WAIT_WAS_SYSCFG_CNF);

            /* 启动等待回复定时器 */
            NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_WAS_SYSCFG_CNF, TI_NAS_MMC_WAIT_WAS_SYSCFG_CNF_LEN);
            break;

        case NAS_MML_NET_RAT_TYPE_GSM:

            /* 向G模下发SYSCFG设置请求 */
            NAS_MMC_SndAsSyscfgReq(pstSysCfgMsg, UEPS_PID_GAS);
            NAS_MMC_AddSysCfgIndex_SysCfg();

            /* 进行SYSCFG状态机的子状态的迁移 */
            NAS_MMC_FSM_SetCurrState(NAS_MMC_SYSCFG_STA_WAIT_GAS_SYSCFG_CNF);

            /* 启动等待回复定时器 */
            NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_GAS_SYSCFG_CNF, TI_NAS_MMC_WAIT_GAS_SYSCFG_CNF_LEN);
            break;

        default:
            NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SetRatModeSysCfgReq_SysCfg():Invalid net rat type");
            break;
    }

    return;
}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:57,代码来源:NasMmcFsmSyscfg.c


示例14: MN_CALL_CsCallDiscInfoRecord

VOS_VOID MN_CALL_CsCallDiscInfoRecord(
    MN_CALL_ID_T                            ucCallId,
    NAS_ERR_LOG_CS_MT_CALL_CAUSE_ENUM_U32   enCause
)
{
    NAS_ERR_LOG_PROCESS_INFO_IND_EVENT_STRU stProcInfoEvent;
    VOS_UINT32                              ulLength;
    VOS_UINT16                              usLevel;
    VOS_UINT32                              ulIsLogRecord;
    VOS_UINT32                              ulResult;

    /* 查询对应Alarm Id是否需要记录异常信息 */
    usLevel       = NAS_GetErrLogAlmLevel(NAS_ERR_LOG_ALM_PORCESS_INFO_IND);
    ulIsLogRecord = TAF_SDC_IsErrLogNeedRecord(usLevel);

    /* 模块异常不需要记录或异常原因值不需要记录时,不保存异常信息 */
    if (VOS_FALSE == ulIsLogRecord)
    {
        return;
    }

    ulLength = sizeof(NAS_ERR_LOG_PROCESS_INFO_IND_EVENT_STRU);

    /* 填充过程信息 */
    PS_MEM_SET(&stProcInfoEvent, 0x00, ulLength);

    NAS_COMM_BULID_ERRLOG_HEADER_INFO(&stProcInfoEvent.stHeader,
                                      VOS_GetModemIDFromPid(WUEPS_PID_TAF),
                                      NAS_ERR_LOG_ALM_PORCESS_INFO_IND,
                                      usLevel,
                                      VOS_GetSlice(),
                                      (ulLength - sizeof(OM_ERR_LOG_HEADER_STRU)));

    stProcInfoEvent.enInfoType          = NAS_ERR_LOG_PROCESS_INFO_TYPE_CS_CALL_DISC;
    stProcInfoEvent.stDiscInfo.ucCallId = ucCallId;
    stProcInfoEvent.stDiscInfo.ulCause  = enCause;

    /*
       将异常信息写入Buffer中
       实际写入的字符数与需要写入的不等则打印异常
     */
    ulResult = TAF_SDC_PutErrLogRingBuf((VOS_CHAR *)&stProcInfoEvent, ulLength);
    if (ulResult != ulLength)
    {
        NAS_ERROR_LOG(WUEPS_PID_TAF, "MN_CALL_CsCallDiscInfoRecord(): Push buffer error.");
    }

    /* 可维可测勾包 */
    NAS_COM_MntnPutRingbuf(NAS_ERR_LOG_ALM_PORCESS_INFO_IND,
                           WUEPS_PID_TAF,
                           (VOS_UINT8 *)&stProcInfoEvent,
                           sizeof(stProcInfoEvent));

    return;
}
开发者ID:XePeleato,项目名称:android_kernel_huawei_venus,代码行数:55,代码来源:MnCall.c


示例15: NAS_RABM_RcvGmmReestablishCnf

VOS_VOID NAS_RABM_RcvGmmReestablishCnf(
    GMMRABM_REESTABLISH_CNF_STRU       *pstGmmReestablishCnf
)
{
    NAS_RABM_PROC_FUNC_TBL_STRU        *pstProcFuncTbl;
    GMM_RABM_NET_RAT_ENUM_UINT32        enCurrentSysMode;

    /* 判断当前的系统模式是否有效 */
    enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
    if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvGmmReestablishCnf: Invalid System Mode.");
        return;
    }

    /* 根据当前系统模式获取对应的处理函数表的指针 */
    pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);

    /* 确认函数处理表已经注册 */
    if (VOS_NULL_PTR != pstProcFuncTbl)
    {
        if (VOS_NULL_PTR != pstProcFuncTbl->pGmmReestablishCnfProcFunc)
        {
            /* 调用对应模式的处理函数 */
            pstProcFuncTbl->pGmmReestablishCnfProcFunc(pstGmmReestablishCnf);
        }
        else
        {
            NAS_WARNING_LOG(WUEPS_PID_RABM,
                            "NAS_RABM_RcvGmmReestablishCnf: pGmmReestablishCnfProcFunc is not registered.");
        }
    }
    else
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvGmmReestablishCnf: Message is received in wrong system mode.");
    }
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:39,代码来源:NasRabmMain.c


示例16: NAS_RABM_RcvDataResumeInd

VOS_VOID NAS_RABM_RcvDataResumeInd(
    VOS_UINT8                           ucRebuildRabFlag
)
{
    NAS_RABM_PROC_FUNC_TBL_STRU        *pstProcFuncTbl;
    GMM_RABM_NET_RAT_ENUM_UINT32        enCurrentSysMode;

    /* 判断当前的系统模式是否有效 */
    enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
    if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvDataResumeInd: Invalid System Mode.");
        return;
    }

    /* 根据当前系统模式获取对应的处理函数表的指针 */
    pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);

    /* 确认函数处理表已经注册 */
    if (VOS_NULL_PTR != pstProcFuncTbl)
    {
        if (VOS_NULL_PTR != pstProcFuncTbl->pDataResumeIndProcFunc)
        {
            /* 调用对应模式的处理函数 */
            pstProcFuncTbl->pDataResumeIndProcFunc(ucRebuildRabFlag);
        }
        else
        {
            NAS_WARNING_LOG(WUEPS_PID_RABM,
                            "NAS_RABM_RcvDataResumeInd: pDataResumeIndProcFunc is not registered.");
        }
    }
    else
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvDataResumeInd: Message is received in wrong system mode.");
    }
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:39,代码来源:NasRabmMain.c


示例17: NAS_RABM_RcvSmDeactivateInd

VOS_VOID NAS_RABM_RcvSmDeactivateInd(
    RABMSM_DEACTIVATE_IND_STRU         *pstSmDeactivateInd
)
{
    NAS_RABM_PROC_FUNC_TBL_STRU        *pstProcFuncTbl;
    GMM_RABM_NET_RAT_ENUM_UINT32        enCurrentSysMode;

    /* 判断当前的系统模式是否有效 */
    enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
    if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvSmDeactivateInd: Invalid System Mode.");
        return;
    }

    /* 根据当前系统模式获取对应的处理函数表的指针 */
    pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);

    /* 确认函数处理表已经注册 */
    if (VOS_NULL_PTR != pstProcFuncTbl)
    {
        if (VOS_NULL_PTR != pstProcFuncTbl->pSmDeactivateIndProcFunc)
        {
            /* 调用对应模式的处理函数 */
            pstProcFuncTbl->pSmDeactivateIndProcFunc(pstSmDeactivateInd);
        }
        else
        {
            NAS_WARNING_LOG(WUEPS_PID_RABM,
                            "NAS_RABM_RcvSmDeactivateInd: pSmDeactivateIndProcFunc is not registered.");
        }
    }
    else
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_RcvSmDeactivateInd: Msg is received in wrong system mode.");
    }
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:39,代码来源:NasRabmMain.c


示例18: NAS_UTRANCTRL_RcvTiWaitTdSuspendCnfExpired_PlmnSelection_WaitTdSuspendCnf

VOS_UINT32 NAS_UTRANCTRL_RcvTiWaitTdSuspendCnfExpired_PlmnSelection_WaitTdSuspendCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 异常打印 */
    NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitTdSuspendCnfExpired_PlmnSelection_WaitTdSuspendCnf: ENTERED");

    /* 复位 */
    NAS_MML_SoftReBoot();

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
开发者ID:herryfan,项目名称:kernel-huawei-h60,代码行数:14,代码来源:NasUtranCtrlFsmPlmnSelection.c


示例19: NAS_RABM_RcvCommMsg

VOS_VOID NAS_RABM_RcvCommMsg(
    struct MsgCB                       *pMsg
)
{
    NAS_RABM_PROC_FUNC_TBL_STRU        *pstProcFuncTbl;
    GMM_RABM_NET_RAT_ENUM_UINT32        enCurrentSysMode;

    /* 判断当前的系统模式是否有效 */
    enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
    if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_ProcSysSrvChgInd: Invalid System Mode.");
        return;
    }

    /* 根据当前系统模式获取对应的处理函数表的指针 */
    pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);
    if (VOS_NULL_PTR != pstProcFuncTbl)
    {
        if (VOS_NULL_PTR != pstProcFuncTbl->pTaskEntry)
        {
            /* 调用对应模式的处理函数 */
            pstProcFuncTbl->pTaskEntry(pMsg);
        }
        else
        {
            NAS_WARNING_LOG(WUEPS_PID_RABM,
                            "NAS_RABM_ProcessCommMsg: TaskEntry is not registered.");
        }
    }
    else
    {
        NAS_ERROR_LOG(WUEPS_PID_RABM,
                      "NAS_RABM_ProcessCommMsg: Msg is received in wrong system mode.");
    }
}
开发者ID:debbiche,项目名称:android_kernel_huawei_p8,代码行数:37,代码来源:NasRabmMain.c


示例20: NAS_SMS_SndOmInquireCnfMsg

VOS_VOID NAS_SMS_SndOmInquireCnfMsg(
    ID_NAS_OM_INQUIRE_STRU             *pstOmInquireMsg
)
{
    VOS_UINT32                          ulMsgLen;
    NAS_OM_SMS_CONFIRM_STRU            *pstNasOmSmsCnf;
    VOS_UINT32                          ulRet;
    VOS_UINT32                          ulSndOmRet;

    /* 1. 向OM发送IND消息 */
    ulSndOmRet = NAS_MMC_SndOmSmsIndMsg();

    /* 2. 向工具侧回复CNF消息 */
    /* 申请消息 */
    ulMsgLen       = sizeof(NAS_OM_SMS_CONFIRM_STRU) - VOS_MSG_HEAD_LENGTH;

    pstNasOmSmsCnf = (NAS_OM_SMS_CONFIRM_STRU*)PS_ALLOC_MSG(WUEPS_PID_SMS, ulMsgLen);
    if (VOS_NULL_PTR == pstNasOmSmsCnf)
    {
        NAS_ERROR_LOG(WUEPS_PID_SMS, "NAS_MMC_SndOmInquireCnfMsg:Memory Allocate fail!");
        return;
    }

    /* 初始化 */
    PS_MEM_SET((VOS_UINT8*)pstNasOmSmsCnf + VOS_MSG_HEAD_LENGTH, 0x00, ulMsgLen);

    /* 填写消息内容 */
    pstNasOmSmsCnf->ulReceiverPid    = MSP_PID_DIAG_APP_AGENT;
    pstNasOmSmsCnf->ulMsgId          = ID_NAS_OM_SMS_CONFIRM;
    pstNasOmSmsCnf->usOriginalId     = pstOmInquireMsg->usOriginalId;
    pstNasOmSmsCnf->usTerminalId     = pstOmInquireMsg->usTerminalId;
    pstNasOmSmsCnf->ulTimeStamp      = pstOmInquireMsg->ulTimeStamp;
    pstNasOmSmsCnf->ulSN             = pstOmInquireMsg->ulSN;
    pstNasOmSmsCnf->enResult         = (NAS_OM_RESULT_ENUM_UINT32)ulSndOmRet;


    /* 发送消息 */
    ulRet = PS_SEND_MSG(WUEPS_PID_SMS, pstNasOmSmsCnf);
    if (VOS_OK != ulRet)
    {
        MN_WARN_LOG("NAS_MMC_SndOmOtaCnf:WARNING: Send msg fail.");
    }

    return;



}
开发者ID:XePeleato,项目名称:android_kernel_huawei_venus,代码行数:48,代码来源:smsmain.c



注:本文中的NAS_ERROR_LOG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ NAS_UTRANCTRL_GetUtranCtrlCtx函数代码示例发布时间:2022-05-30
下一篇:
C++ NAPI_CALL函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap