C++ MlmeEnqueue函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MlmeEnqueue函数的典型用法代码示例。如果您正苦于以下问题：C++ MlmeEnqueue函数的具体用法？C++ MlmeEnqueue怎么用？C++ MlmeEnqueue使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MlmeEnqueue函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: AssocTimeoutAction

/*
  ==========================================================================
  Description:
  what the state machine will do after assoc timeout
  ==========================================================================
*/
VOID AssocTimeoutAction(
    IN PRTMP_ADAPTER pAd,
    IN MLME_QUEUE_ELEM *Elem)
{
    USHORT Status;
    DBGPRINT(RT_DEBUG_TRACE, "ASSOC - AssocTimeoutAction\n");
    pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
    Status = MLME_REJ_TIMEOUT;
    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status);

}

开发者ID:cnm，项目名称:mia_vita，代码行数:17，代码来源:assoc.c

示例2: ApCliProbeTimeoutAtJoinAction

static VOID ApCliProbeTimeoutAtJoinAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem) 
{
	APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState;
	APCLI_STRUCT *pApCliEntry = NULL;

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("APCLI_SYNC - ProbeTimeoutAtJoinAction\n"));

	if (ifIndex >= MAX_APCLI_NUM)
		return;

	pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
	*pCurrState = SYNC_IDLE;

#ifdef APCLI_CONNECTION_TRIAL
	if (ifIndex == 1)
		*pCurrState = APCLI_CTRL_DISCONNECTED;
#endif /* APCLI_CONNECTION_TRIAL */
	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("APCLI_SYNC - MlmeAux.Bssid=%02x:%02x:%02x:%02x:%02x:%02x\n",
								PRINT_MAC(pApCliEntry->MlmeAux.Bssid)));

	if(!MAC_ADDR_EQUAL(pApCliEntry->MlmeAux.Bssid, ZERO_MAC_ADDR))
	{
		ApCliCtrlMsg.Status = MLME_SUCCESS;
#ifdef MAC_REPEATER_SUPPORT
		ApCliCtrlMsg.BssIdx = ifIndex;
		ApCliCtrlMsg.CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */

		MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PROBE_RSP,
			sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
	} else
	{
		MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_JOIN_REQ_TIMEOUT, 0, NULL, ifIndex);
	}

	return;
}

开发者ID:AnyoeDove，项目名称:mtk-sources，代码行数:41，代码来源:apcli_sync.c

示例3: MeshCtrlDisconnectAtDicoveryAction

static VOID
MeshCtrlDisconnectAtDicoveryAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{

	MESH_CTRL_STATE *pCurrState = &(pAd->MeshTab.CtrlCurrentState);
	INT i;

	DBGPRINT(RT_DEBUG_TRACE, ("%s: Get Disconnect evt when Discovery.\n", __FUNCTION__));

	for (i = 0; i < MAX_MESH_LINKS; i++)
	{
		MlmeEnqueue(pAd, MESH_LINK_MNG_STATE_MACHINE, MESH_LINK_MNG_CNCL, 0, NULL, i);
	}
	
#ifdef AP_SCAN_SUPPORT
	MlmeEnqueue(pAd, AP_SYNC_STATE_MACHINE, APMT2_MLME_SCAN_CNCL, 0, NULL, 0);
#endif
	*pCurrState = MESH_CTRL_IDLE;
}

开发者ID:23171580，项目名称:ralink，代码行数:21，代码来源:mesh_ctrl.c

示例4: MlmeAuthReqAction

/*
    ==========================================================================
    Description:
        
	IRQL = DISPATCH_LEVEL

    ==========================================================================
 */
VOID MlmeAuthReqAction(RTMP_ADAPTER *pAd, MLME_QUEUE_ELEM *Elem)
{
	if (AUTH_ReqSend(pAd, Elem, &pAd->MlmeAux.AuthTimer, "AUTH", 1, NULL, 0))
		pAd->Mlme.AuthMachine.CurrState = AUTH_WAIT_SEQ2;
	else {
		USHORT Status;

		pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
		Status = MLME_INVALID_FORMAT;
		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status, 0);
	}
}

开发者ID:rizi-456，项目名称:mtabox，代码行数:20，代码来源:auth.c

示例5: InvalidStateWhenAuth

/*
    ==========================================================================
    Description:
        
	IRQL = DISPATCH_LEVEL

    ==========================================================================
 */
VOID InvalidStateWhenAuth(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	USHORT Status;
	DBGPRINT(RT_DEBUG_TRACE,
		 ("AUTH - InvalidStateWhenAuth (state=%ld), reset AUTH state machine\n",
		  pAd->Mlme.AuthMachine.CurrState));
	pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
	Status = MLME_STATE_MACHINE_REJECT;
	MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status, 0);
}

开发者ID:0x000000FF，项目名称:MT7601u，代码行数:20，代码来源:auth.c

示例6: ApCliCtrlDeAuthAction

/* 
    ==========================================================================
    Description:
        APCLI MLME Disconnect Req state machine procedure
    ==========================================================================
 */
static VOID ApCliCtrlDeAuthAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem)
{
	PAPCLI_STRUCT pApCliEntry;
	MLME_DEAUTH_REQ_STRUCT	DeAuthFrame;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = NULL;
	BOOLEAN bValid = FALSE;

	DBGPRINT(RT_DEBUG_TRACE, ("(%s) MLME Request Disconnect.\n", __FUNCTION__));

	if ((ifIndex >= MAX_APCLI_NUM)
		)
		return;

	pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].CtrlCurrState;

	pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];

	/* Fill in the related information */
	DeAuthFrame.Reason = (USHORT)REASON_DEAUTH_STA_LEAVING;
	COPY_MAC_ADDR(DeAuthFrame.Addr, pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Bssid);

		bValid = pApCliEntry->Valid;

	
	MlmeEnqueue(pAd, 
				  APCLI_AUTH_STATE_MACHINE, 
				  APCLI_MT2_MLME_DEAUTH_REQ, 
				  sizeof(MLME_DEAUTH_REQ_STRUCT),
				  &DeAuthFrame, 
				  ifIndex);

	if (bValid)
		ApCliLinkDown(pAd, ifIndex);

	/* set the apcli interface be invalid. */
	{
		pApCliEntry->Valid = FALSE;

		/* clear MlmeAux.Ssid and Bssid. */
		NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Bssid, MAC_ADDR_LEN);
		pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.SsidLen = 0;
		NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Ssid, MAX_LEN_OF_SSID);
		pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Rssi = 0;
	}

	*pCurrState = APCLI_CTRL_DISCONNECTED;

	return;
}

开发者ID:rizi-456，项目名称:mtabox，代码行数:58，代码来源:apcli_ctrl.c

示例7: ApCliCtrlAssocReqTimeoutAction

/* 
    ==========================================================================
    Description:
        APCLI MLME Assoc Req timeout state machine procedure
    ==========================================================================
 */
static VOID ApCliCtrlAssocReqTimeoutAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem)
{
	MLME_ASSOC_REQ_STRUCT  AssocReq;
	PAPCLI_STRUCT pApCliEntry;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = NULL;

	DBGPRINT(RT_DEBUG_TRACE, ("(%s) Assoc Req Timeout.\n", __FUNCTION__));

	if ((ifIndex >= MAX_APCLI_NUM)
		)
		return;

	pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].CtrlCurrState;

	pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];

	/* give up to retry authentication req after retry it 5 times. */
	{
		pApCliEntry->AssocReqCnt++;
		if (pApCliEntry->AssocReqCnt > 5)
		{
			*pCurrState = APCLI_CTRL_DISCONNECTED;
			NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Bssid, MAC_ADDR_LEN);
			NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Ssid, MAX_LEN_OF_SSID);
			pApCliEntry->AssocReqCnt = 0;
		
#ifdef APCLI_AUTO_CONNECT_SUPPORT
			if ((pAd->ApCfg.ApCliAutoConnectRunning == TRUE)
				)
				ApCliSwitchCandidateAP(pAd);
#endif /* APCLI_AUTO_CONNECT_SUPPORT */
			return;
		}
	}

	/* stay in same state. */
	*pCurrState = APCLI_CTRL_ASSOC;

	/* retry Association Req. */
	DBGPRINT(RT_DEBUG_TRACE, ("(%s) Retry Association Req.\n", __FUNCTION__));
	AssocParmFill(pAd, &AssocReq, pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Bssid, pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.CapabilityInfo,
		ASSOC_TIMEOUT, 5);


	MlmeEnqueue(pAd, APCLI_ASSOC_STATE_MACHINE, APCLI_MT2_MLME_ASSOC_REQ, 
		sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq, ifIndex);

	return;
}

开发者ID:rizi-456，项目名称:mtabox，代码行数:58，代码来源:apcli_ctrl.c

示例8: FT_OTD_InvalidStateWhenFt

/*
	==========================================================================
	Description:

	IRQL = DISPATCH_LEVEL

	==========================================================================
 */
VOID FT_OTD_InvalidStateWhenFt(
    IN PRTMP_ADAPTER pAd,
    IN MLME_QUEUE_ELEM *Elem)
{
    USHORT Status;
    DBGPRINT(RT_DEBUG_TRACE,
             ("FT_OTD_ACTION - InvalidStateWhenFt (state=%lu), reset FT state machine\n",
              pAd->Mlme.FtOtdActMachine.CurrState));
    pAd->Mlme.FtOtdActMachine.CurrState = FT_OTD_IDLE;
    Status = MLME_STATE_MACHINE_REJECT;
    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_FT_OTD_CONF, 2, &Status,
                0);
}

开发者ID:vm3vuy，项目名称:my-local-repository，代码行数:21，代码来源:ft_action.c

示例9: MlmeAuthReqAction

void MlmeAuthReqAction(struct rt_rtmp_adapter *pAd, struct rt_mlme_queue_elem *Elem)
{
	if (AUTH_ReqSend
	    (pAd, Elem, &pAd->MlmeAux.AuthTimer, "AUTH", 1, NULL, 0))
		pAd->Mlme.AuthMachine.CurrState = AUTH_WAIT_SEQ2;
	else {
		u16 Status;

		pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
		Status = MLME_INVALID_FORMAT;
		MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2,
			    &Status);
	}
}

开发者ID:flwh，项目名称:Alcatel_OT_985_kernel，代码行数:14，代码来源:auth.c

示例10: ApCliProbeTimeout

/*
    ==========================================================================
    Description:
        Becaon timeout handler, executed in timer thread
    ==========================================================================
 */
static VOID ApCliProbeTimeout(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
#ifdef APCLI_CONNECTION_TRIAL
	PAPCLI_STRUCT pApCliEntry = (APCLI_STRUCT *)FunctionContext;
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pApCliEntry->pAd;
#else
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
#endif /*APCLI_CONNECTION_TRIAL*/

	DBGPRINT(RT_DEBUG_TRACE, ("ApCli_SYNC - ProbeReqTimeout\n"));
#ifndef APCLI_CONNECTION_TRIAL
	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, 0);
#else
	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, pApCliEntry->ifIndex);
#endif /* APCLI_CONNECTION_TRIAL */
	RTMP_MLME_HANDLER(pAd);

	return;
}

开发者ID:mickeyreg，项目名称:driver，代码行数:29，代码来源:apcli_sync.c

示例11: ApCliAssocTimeoutAction

/*
    ==========================================================================
    Description:
        what the state machine will do after assoc timeout
    ==========================================================================
 */
static VOID ApCliAssocTimeoutAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem) 
{
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AssocCurrState;

	DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - ApCliAssocTimeoutAction\n"));
	*pCurrState = APCLI_ASSOC_IDLE;

	MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_REQ_TIMEOUT, 0, NULL, ifIndex);

	return;
}

开发者ID:aircross，项目名称:ray，代码行数:20，代码来源:p2pcli_assoc.c

示例12: ApCliCtrlAuthReqTimeoutAction

/* 
    ==========================================================================
    Description:
        APCLI MLME Auth Req timeout state machine procedure
    ==========================================================================
 */
static VOID ApCliCtrlAuthReqTimeoutAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem)
{
	MLME_AUTH_REQ_STRUCT AuthReq;
	PAPCLI_STRUCT pApCliEntry;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = NULL;

	if ((ifIndex >= MAX_APCLI_NUM)
		)
		return;

		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].CtrlCurrState;

	pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
	DBGPRINT(RT_DEBUG_TRACE, ("(%s) Auth Req Timeout.\n", __FUNCTION__));

	{
		pApCliEntry->AuthReqCnt++;

		if (pApCliEntry->AuthReqCnt > 5)
		{
			*pCurrState = APCLI_CTRL_DISCONNECTED;
			NdisZeroMemory(pApCliEntry->MlmeAux.Bssid, MAC_ADDR_LEN);
			NdisZeroMemory(pApCliEntry->MlmeAux.Ssid, MAX_LEN_OF_SSID);
			pApCliEntry->AuthReqCnt = 0;
		
#ifdef APCLI_AUTO_CONNECT_SUPPORT
		if ((pAd->ApCfg.ApCliAutoConnectRunning == TRUE)
			)
			ApCliSwitchCandidateAP(pAd);
#endif /* APCLI_AUTO_CONNECT_SUPPORT */
			return;
	}
	}

	/* stay in same state. */
	*pCurrState = APCLI_CTRL_AUTH;

	/* retry Authentication. */
	DBGPRINT(RT_DEBUG_TRACE, ("(%s) Retry Auth Req.\n", __FUNCTION__));
	COPY_MAC_ADDR(AuthReq.Addr, pApCliEntry->MlmeAux.Bssid);
	AuthReq.Alg = pApCliEntry->MlmeAux.Alg; /*Ndis802_11AuthModeOpen; */
	AuthReq.Timeout = AUTH_TIMEOUT;
	MlmeEnqueue(pAd, APCLI_AUTH_STATE_MACHINE, APCLI_MT2_MLME_AUTH_REQ,
		sizeof(MLME_AUTH_REQ_STRUCT), &AuthReq, ifIndex);

	return;
}

开发者ID:rizi-456，项目名称:mtabox，代码行数:56，代码来源:apcli_ctrl.c

示例13: ApCliTrialConnectTimeout

static VOID ApCliTrialConnectTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	PAPCLI_STRUCT pApCliEntry = (APCLI_STRUCT *)FunctionContext;
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pApCliEntry->pAd;

	UCHAR ifIndex = pApCliEntry->ifIndex;
	UCHAR BBPValue;
	PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].CtrlCurrState;

	DBGPRINT(RT_DEBUG_TRACE, ("ApCli_SYNC - TrialConnectTimeout, Jump back to original Channel\n"));

	AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, TRUE);
	AsicEnableBssSync(pAd);//jump back to origin channel, regenerate beacon.
	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
	{
	}

	if (*pCurrState == APCLI_CTRL_ASSOC) {
		//trialConnectTimeout, and currect status is ASSOC,
		//it means we got Auth Resp from new root AP already,
		//we shall serve the origin channel traffic first,
		//and jump back to trial channel to issue Assoc Req later, 
		//and finish four way-handshake if need.
		DBGPRINT(RT_DEBUG_TRACE, ("%s, ApCliTrialConnectTimeout APCLI_CTRL_ASSOC set TrialConnectPhase2Timer\n", __func__));
		RTMPSetTimer(&(pApCliEntry->TrialConnectPhase2Timer), TRIAL_TIMEOUT);
	}
	else {
		//RTMPCancelTimer(&(pApCliEntry->ApCliMlmeAux.ProbeTimer), &Cancelled);
		pApCliEntry->NewRootApRetryCnt++;

		if (pApCliEntry->NewRootApRetryCnt >= 10) {
			DBGPRINT(RT_DEBUG_TRACE, ("%s, RetryCnt:%d, pCurrState = %d, \n", __func__, pApCliEntry->NewRootApRetryCnt, *pCurrState));
			pApCliEntry->TrialCh=0;
			MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_DISCONNECT_REQ, 0, NULL, ifIndex);
			NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].CfgSsid, MAX_LEN_OF_SSID);//cleanup CfgSsid.
			pApCliEntry->CfgSsidLen = 0;
			pApCliEntry->NewRootApRetryCnt = 0;//cleanup retry count
			pApCliEntry->Enable = FALSE;
		}
		else
			*pCurrState = APCLI_CTRL_DISCONNECTED;//Disconnected State will bring the next probe req, auth req.
	}

	return;
}

开发者ID:rizi-456，项目名称:mtabox，代码行数:49，代码来源:apcli_ctrl.c

示例14: ApCliAuthTimeout

/*
	==========================================================================
	Description:
		function to be executed at timer thread when auth timer expires
	==========================================================================
 */
static VOID ApCliAuthTimeout(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("%s():AuthTimeout\n", __FUNCTION__));

	MlmeEnqueue(pAd, APCLI_AUTH_STATE_MACHINE, APCLI_MT2_AUTH_TIMEOUT, 0, NULL, 0);
	RTMP_MLME_HANDLER(pAd);

	return;
}

开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:21，代码来源:apcli_auth.c

示例15: ApCliProbeTimeout

/* 
    ==========================================================================
    Description:
        Becaon timeout handler, executed in timer thread
    ==========================================================================
 */
static VOID ApCliProbeTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
#if   defined(APCLI_CONNECTION_TRIAL) || defined(MULTI_APCLI_SUPPORT)
	PAPCLI_STRUCT pApCliEntry = (APCLI_STRUCT *)FunctionContext;
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pApCliEntry->pAd;
#else
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
#endif /*APCLI_CONNECTION_TRIAL*/

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("ApCli_SYNC - ProbeReqTimeout\n"));

#if defined(APCLI_CONNECTION_TRIAL)|| defined(MULTI_APCLI_SUPPORT)
	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, pApCliEntry->ifIndex);
#else
	MlmeEnqueue(pAd,APCLI_SYNC_STATE_MACHINE,APCLI_MT2_PROBE_TIMEOUT,0,NULL,0);
#endif /* APCLI_CONNECTION_TRIAL */
	RTMP_MLME_HANDLER(pAd);

	return;
}

开发者ID:eager7，项目名称:linux-kernel，代码行数:30，代码来源:apcli_sync.c

示例16: ApCliProbeTimeout

/* 
    ==========================================================================
    Description:
        Becaon timeout handler, executed in timer thread
    ==========================================================================
 */
static VOID ApCliProbeTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("ApCli_SYNC - ProbeReqTimeout\n"));

	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, 0);
	RTMP_MLME_HANDLER(pAd);

	return;
}

开发者ID:jing-git，项目名称:rt-n56u，代码行数:21，代码来源:apcli_sync.c

示例17: ApCliAssocTimeout

/*
    ==========================================================================
    Description:
        Association timeout procedure. After association timeout, this function 
        will be called and it will put a message into the MLME queue
    Parameters:
        Standard timer parameters
    ==========================================================================
 */
static VOID ApCliAssocTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - enqueue APCLI_MT2_ASSOC_TIMEOUT \n"));

	MlmeEnqueue(pAd, APCLI_ASSOC_STATE_MACHINE, APCLI_MT2_ASSOC_TIMEOUT, 0, NULL, 0);
	RTMP_MLME_HANDLER(pAd);

	return;
}

开发者ID:aircross，项目名称:ray，代码行数:24，代码来源:p2pcli_assoc.c

示例18: MeshMcsTimeout

/*
    ==========================================================================
    Description:
        Mesh-Channel-Switch timeout procedure.
    Parameters:
        Standard timer parameters
    ==========================================================================
 */
static VOID MeshMcsTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("%s - enqueue MESH_CTRL_MCS_TIMEOUT to MESH_CTRL State-Machine.\n", __FUNCTION__));

	MlmeEnqueue(pAd, MESH_CTRL_STATE_MACHINE, MESH_CTRL_MCS_TIMEOUT, 0, NULL, 0);
    MeshMlmeHandler(pAd);

	return;
}

开发者ID:23171580，项目名称:ralink，代码行数:23，代码来源:mesh_ctrl.c

示例19: ApCliPeerDeauthAction

/*
    ==========================================================================
    Description:
    ==========================================================================
*/
static VOID ApCliPeerDeauthAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	UCHAR       Addr1[MAC_ADDR_LEN];
	UCHAR       Addr2[MAC_ADDR_LEN];
	UCHAR       Addr3[MAC_ADDR_LEN];
	USHORT      Reason;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AuthCurrState;
#ifdef APCLI_WPA_SUPPLICANT_SUPPORT
	PMAC_TABLE_ENTRY pMacEntry = NULL;
#endif /*APCLI_WPA_SUPPLICANT_SUPPORT*/

	if (ifIndex >= MAX_APCLI_NUM)
		return;

#ifdef APCLI_WPA_SUPPLICANT_SUPPORT
	pMacEntry = &pAd->MacTab.Content[pAd->ApCfg.ApCliTab[ifIndex].MacTabWCID];
	if (!pMacEntry || !IS_ENTRY_APCLI(pMacEntry))
	{
		return;
	}
#endif /*APCLI_WPA_SUPPLICANT_SUPPORT*/

	if (PeerDeauthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr1, Addr2, Addr3, &Reason))
	{
		DBGPRINT(RT_DEBUG_TRACE, ("APCLI AUTH_RSP - receive DE-AUTH from our AP\n"));
		*pCurrState = APCLI_AUTH_REQ_IDLE;

#ifdef APCLI_WPA_SUPPLICANT_SUPPORT
			if ((pAd->ApCfg.ApCliTab[ifIndex].WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
				(pAd->ApCfg.ApCliTab[ifIndex].AuthMode == Ndis802_11AuthModeWPA2)
				&&(pMacEntry->PortSecured == WPA_802_1X_PORT_SECURED))
				{
					pAd->ApCfg.ApCliTab[ifIndex].bLostAp = TRUE;
				}
#endif /*APCLI_WPA_SUPPLICANT_SUPPORT*/

		MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PEER_DISCONNECT_REQ, 0, NULL, ifIndex);
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("APCLI AUTH_RSP - ApCliPeerDeauthAction() sanity check fail\n"));
	}

	return;
}

开发者ID:derekcentrico，项目名称:m6.kernel.3.x，代码行数:53，代码来源:apcli_auth.c

示例20: BAOriSessionSetupTimeout

/*
	==========================================================================
	Description:
		Retry sending ADDBA Reqest.

	IRQL = DISPATCH_LEVEL

	Parametrs:
	p8023Header: if this is already 802.3 format, p8023Header is NULL

	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
				FALSE , then continue indicaterx at this moment.
	==========================================================================
 */
void BAOriSessionSetupTimeout(void *SystemSpecific1,
			      void *FunctionContext,
			      void *SystemSpecific2,
			      void *SystemSpecific3)
{
	struct rt_ba_ori_entry *pBAEntry = (struct rt_ba_ori_entry *)FunctionContext;
	struct rt_mac_table_entry *pEntry;
	struct rt_rtmp_adapter *pAd;

	if (pBAEntry == NULL)
		return;

	pAd = pBAEntry->pAdapter;

	{
		/* Do nothing if monitor mode is on */
		if (MONITOR_ON(pAd))
			return;
	}

	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];

	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes)
	    && (pBAEntry->Token < ORI_SESSION_MAX_RETRY)) {
		struct rt_mlme_addba_req AddbaReq;

		NdisZeroMemory(&AddbaReq, sizeof(AddbaReq));
		COPY_MAC_ADDR(AddbaReq.pAddr, pEntry->Addr);
		AddbaReq.Wcid = (u8)(pEntry->Aid);
		AddbaReq.TID = pBAEntry->TID;
		AddbaReq.BaBufSize =
		    pAd->CommonCfg.BACapability.field.RxBAWinLimit;
		AddbaReq.TimeOutValue = 0;
		AddbaReq.Token = pBAEntry->Token;
		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE,
			    sizeof(struct rt_mlme_addba_req), (void *)& AddbaReq);
		RTMP_MLME_HANDLER(pAd);
		DBGPRINT(RT_DEBUG_TRACE,
			 ("BA Ori Session Timeout(%d) : Send ADD BA again\n",
			  pBAEntry->Token));

		pBAEntry->Token++;
		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
	} else {
		BATableFreeOriEntry(pAd, pEntry->BAOriWcidArray[pBAEntry->TID]);
	}
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:61，代码来源:ba_action.c

注：本文中的MlmeEnqueue函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MlmeFreeMemory函数代码示例发布时间：2022-05-30

C++ MlmeAllocateMemory函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19248|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8649|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ MlmeEnqueue函数代码示例

示例1: AssocTimeoutAction

示例2: ApCliProbeTimeoutAtJoinAction

示例3: MeshCtrlDisconnectAtDicoveryAction

示例4: MlmeAuthReqAction

示例5: InvalidStateWhenAuth

示例6: ApCliCtrlDeAuthAction

示例7: ApCliCtrlAssocReqTimeoutAction

示例8: FT_OTD_InvalidStateWhenFt

示例9: MlmeAuthReqAction

示例10: ApCliProbeTimeout

示例11: ApCliAssocTimeoutAction

示例12: ApCliCtrlAuthReqTimeoutAction

示例13: ApCliTrialConnectTimeout

示例14: ApCliAuthTimeout

示例15: ApCliProbeTimeout

示例16: ApCliProbeTimeout

示例17: ApCliAssocTimeout

示例18: MeshMcsTimeout

示例19: ApCliPeerDeauthAction

示例20: BAOriSessionSetupTimeout

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

go-kit/kit: A standard library for micro

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053